Refractory Ceramics Division Alfred W. Allen Award Winners

Refractory Ceramics Division
Alfred W. Allen Award Winners
2014 - Eric Y. Sako, Mariana A. L. Braulio, Enno Zinngrebe, Sieger R. van der Laan, and Victor C.
Pandolfelli, "In-Depth Microstructural Evolution Analyses of Cement-Bonded Spinel Refractory
Castables: Novel Insights Regarding Spinel and CA6 Formation," J. Amer. Ceram. Soc., 95 [5] 17321740 (2012)
2012 - Wagner M. Silva and Modestino A. M. Brito - Magnesita Refractories S.A., Brazil,
Christos G. Aneziris - Institute for Ceramics, Glass and Construction Materials, Technical University
Freiberg, Germany, "Effect of Alumina and Silica on the Hydration Behaviour of Magnesia Based
Refractories," J. Amer. Ceram. Soc., 94(12) 4218-4225 (2011)
2010 - Devdutt Shukla and Jeffrey D. Smith, “Effect of Celsian on Corrosion of Aluminosilicate Castable
Refractories,” Refractories Applications, Vol. 4, No. 3, November/December 2009.
2008 - Chang Min Chun, Narasimha-Rao V. Bangaru, Neeraj Thirumalai, John R. Peterson, Christopher
J. Fowler, and Robert L. Antram,
“Erosion-Corrosion-Resistant Titanium Diboride Cermets for High-Temperature Process Applications,”
Int. J. Appl. Ceram. Technol., pp. 1-13, 2008.
2006 – Y.A. Marques, R.G. Pileggi, F.A.O. Valenzuela, M.A.L. Braulio, and V.C. Pandolfelli, “Setting
Additives Influence on the Thermomechanical Properties of Wet Shotcrete Refractory Castable
Matrices,” Ceram. Bull., pp. 9201-9206, 2005.
2004 – S. Ramachandran, K.D. Peaslee, and J.D. Smith, “Thermochemistry of Steel-Refractory
Interactions in Continuous Casting Nozzles,” Iron and Steelmaker, 11 (2003) pp.55-63.
2002 – Michel Rigaud, Stefan Palco, and Ningsheng Zhou, “Alumina and Magnesia-Based Castables
Containing Graphite: Comparison”
2000 – A.A. Weresczak, T.P. Kirkland, and W.F. Curtis, “Creep of CaO/SiO 2-containing MgO
Refractories,” J. Mater. Sci., 34 (1999), pp. 215-227.
1998 – Gord Cuthbert, Reg White, Brian Martin, Chris Doyle, Juan Hrepic, and Carlos Diaz, “The Effect
of Slag Composition Control on the Performance of Magnesite-Chrome Refractory Linings in Top Blown
Rotary Converters,” pp.381-392, Advances in Refractories for the Metallurgical Industries II, Canadian
Institute Mining, Metals, Petr., 8/96 Montreal.
1996 – K.N. Singh, C.R. Beechan, T.J. Russo, W.S. Howanski, and B. Brezny, “Reducing Thermally
Induced Stresses in BOF Linings,” pp. 491-498, 1995 Steelmaking Conference Proceedings.
1994 – J. Tu, R.B. Fortuna, and S.C. Su, “Microstructure, Phase Composition and Properties of an
Olivine Based Castable,” pp. 506-516, UNITECR ’93.
1992 – Claude Allaire, Michel Rigaud, and Serge Dallaire, “Basic Phosphate-Bonded Castables from
Dolomitic-Magnesite Clinkers,” J. Amer. Ceram. Soc., 72 (9) 1698-1703 (1989).
1987 – Robert O. Russell
1986 – Brian Rand and O. Serdar Ozgen, “Kinetics of Oxidation of the Graphite Phase in
Alumina/Graphite Materials,” Brit Ceram Trans J, Vol. 84, No. 2, pp. 70-76, 1985.
1985 – Wate T. Bakker, Ulrich Gerhardus, Sherman Greenberg, and Meinholf Trondt, “Refractory
Practice in Slagging Gasifiers, “ Ceram. Bull., pp. 870-6, July 1984.
1984 – Robert O. Russell and Gary D. Morrow, “Characteristics of Refractories Used in Teeming
Ladles,” Iron & Steelmaker, July 1983.
1983 – John Sweeney and Mark Cross, “Analyzing the Stress Response of Commercial Refractory
Structures in Service at High Temperature: A Simple Model of Viscoelastic Stress Response” and “II. A
Thermal Stress Model for Refractory Structures,” Trans. J. Brit. Ceram. Soc., Vol. 81, No. 1, pp. 25-28
and No. 2, pp. 47-52, 1982.
Download PDF