Mr G Hann Directed Electronics Inc c/o SGS EMC Services Your

Mr G Hann
Directed Electronics Inc
c/o SGS EMC Services
Your Reference:
Date: 28 April 2006
Dear Mr Hann
MANUFACTURER OR ACCREDITED AGENT: Directed Electronics Inc
ECE REGULATION/EEC DIRECTIVE: 72/245(95/54), R10, 74/61(95/56), R97.
Job No.
Vehicle Type/Component
EAF068974
“ “ “ “ “ “
“ “ “ “ “ “
“ “ “ “ “ “
Approval No.
Index Rev. No.
Universal fitment alarm e11*72/245*95/54*3794*00 Not applicable
“ “ “ “ “ “ “ “ “ “ “
10R-023794
“ “ “ “ “ “ “ “ “ “ “
e11*74/61*95/56*2245*00 Not applicable
“ “ “ “ “ “ “ “ “ “ “
97R-012245
1. This vehicle type/component has been tested and meets the requirements of the
above ECE Regulation/EEC Directive. I enclose a set of approval documents, comprising
the approval, test report and your documentation duly authenticated.
2. If you think there are any errors in the enclosed package, please contact Andrew
Meadows, telephone 0117 952 4187, e-mail andrew.meadows@vca.gov.uk
immediately. Please be aware that from the date of issue we have a three week
holding period, any corrections required after this time will need to be corrected via an
extension, index revision or correction 1 certificate, as appropriate.
ROAD TRAFFIC ACT 1988 - SECTION 80
3. The Secretary of State for Transport authorises, under section 80 of the Road Traffic
Act 1988, the above manufacturer or accredited agent to apply to the motor vehicle
type/part specified, the appropriate mark designated in the Motor Vehicles (Designation
of Approval Marks) Regulations 1979, as amended. The conditions attached to this
authorisation are set out overleaf.
4. If this approval results in a change being needed to a vehicle information document
issued under the goods vehicle or passenger car national type approval scheme, you
should notify us (i.e. submit a 'notifiable alteration') as soon as possible, using the
address VCA (Whole Vehicle), Room 1.2, The Eastgate Office Centre, Eastgate Road,
Bristol BS5 6XX.
5. VCA is continually scrutinising the quality of the service it provides to customers, in
order to discover more ways in which the standard can be improved. If you have a
specific complaint concerning the way this job has been dealt with, our customer services
leaflet gives guidance on the best approach. If you would like a copy, please contact the
undersigned.
Yours sincerely
Elaine Hill
Product Certification
CONDITIONS
3. CONDITIONS FOR MOTOR VEHICLES
1. This Approval may be withdrawn at any time
and while held is subject to the following conditions.
3.1 The holder of this approval shall put the
approval mark described in the Motor Vehicles
(Designation of Approval Marks) Regulation 1979
as amended only on Motor Vehicles fitted with
Motor Vehicle parts which Motor Vehicles as fitted
with such parts conform with the type of Motor
Vehicle approved by as on behalf of the Secretary of
State for Transport and only on Motor Vehicles that:
2.
Conditions of Motor Vehicle Parts.
2.1 The holder of this approval shall put the
approval mark described in the Motor Vehicles
(Designation of Approval Marks) Regulations
1979 as amended only on Motor Vehicle Parts
that:
a. have been manufactured, assembled or
completed in factories under his control and
b. conform in all material respects with the samples,
which were tested before this approval was issued.
2.2 The holder of this approval shall mark his
products in the manner set out in the relevant
Regulation/Directive as given in the Motor Vehicles
(Designation of Approval Marks) Regulations 1979
as amended together with:
a.
b.
c.
the approval number allocated by the
Secretary of State for Transport.
his name or trademark
any other markings specified in the appropriate
International Regulation
2.3 The holder of this approval shall be prepared at
any time to satisfy Department for Transport
officials or agents of the Department,that the quality
of the part being produced and marked or intended to
be by him with the approval marking conforms in all
material respects with that of the samples tested as
the International Regulation requires.
2.4 The holder of this approval undertakes to admit
duly authorised officials or agents of the Department
at all reasonable times to any premises in which
parts marked or intended to be marked are being
manufactured, assembled or stored and to permit any
such official or agent to inspect parts and all records
relating to them and their production processes.
2.5 This approval may be suspended or withdrawn
by the Secretary of State for Transport at any time
without any particular length of notice being given
and in the event of that being done the holder will
absolve the Secretary of State from any claim for
damages or compensation.
a. have been manufactured, assembled or completed
in factories under his control and
b. conform in all material respects with the type of
Motor Vehicle, which was tested before an approval
certificate was issued.
3.2 The holder of this approval shall mark motor
vehicles of the type approved, in the manner set out
in the relevant Regulation/Directive using the
authorised approval mark as given in the Motor
Vehicles (Designation of Approval Marks)
Regulation 1979 as amended together with the
approval number allocated by the Secretary of State
for Transport.
3.3 The holder of this approval shall mark Motor
Vehicles of the type approved in the manner set out
in the relevant Regulation annexed to the United
Nations agreement of 1958 as amended using the
authorised approval mark which comprises a capital
letter E followed by the number 11 within a circle
together with the approval number allocated by the
Secretary of State for Transport.
3.4 The holder of this approval shall be prepared at
any time to satisfy Department for Transport
officials or agents of the Department that Motor
Vehicles of the type approved which have been
produced and marked or that are intended to be
marked by him conform in all material respects with
the type of vehicle approved.
3.5 The holder of this approval undertakes to admit
duly authorised officials or agents of the Department
at all reasonable times to any premises in which the
Motor Vehicles of the type approved which have
been or are intended to be marked are manufactured,
assembled or stored and to permit any such official
or agent to inspect the Motor Vehicles and all
records relating to them and their production
processes.
3.6 This approval may be suspended or withdrawn
by the Secretary of State for Transport at any time
without any particular length of notice given and in
the event of that being done the holder will absolve
the Secretary of State from any claim for damages or
compensation.
4171
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
Rev 1/03
COMMUNICATION CONCERNING THE APPROVAL GRANTED OF A TYPE
OF ELECTRICAL/ELECTRONIC SUB-ASSEMBLY WITH REGARD TO
REGULATION NO: 10 AS AMENDED BY THE 02 SERIES OF
AMENDMENTS
Approval No: 10R-023794
Reason(s) for extension: Not applicable
1.
Make (trade name of manufacturer): Directed Electronics Inc.
2.
Type and general commercial description(s): Universal fitment alarm system for vehicle
3.
Means of identification of type, if marked on the component:
VIPER 330V (427V)
AUTOMATE AM1 (427A)
AUTOMATE AM 5 (436A)
HORNET 727T (727T)
3.1
Location of that marking: the model name is usually mounted on the top plastic half of the
enclosure and sides of box. The model number is mounted on the bottom of the box.
4.
Category of vehicle: Not applicable
5.
Name and address of manufacturer:
28-Apr-06
A
pp
or
UK
An executive agency of the Department for Transport
ity
Directed Electronics Inc
Vist
San Diego
California 92083
United States of America
roval Aut
h
ECE REGULATION NO: 10.02 STU
6.
In the case of components and separate technical units, location and method of affixing of the
ECE approval mark:
Initial production label will be fixed to bottom of plastic enclosure.
After initial production the mark will be moulded into the plastic enclosure
7.
Address(es) of assembly plant(s):
Portman
No 9 Tongfuyu Industrial District
Long Hua Town
Shenzhen
China 518109
8.
Additional information (where applicable): See Appendix
9.
Technical service responsible for carrying out the tests: SGS EMC Services
10.
Date of test report: 28 December 2005
11.
Number of test report: DUR43965/GH/05
12.
Remarks (if any): See Appendix
13.
Place: BRISTOL
14.
Date: 28 APRIL 2006
15.
Signature:
16.
The index to the information package lodged with the approval authority, which may be obtained
on request is attached.
A. W. STENNING
Head of Product Certification
A
pp
or
UK
28-Apr-06
ity
EAF068974
roval Aut
2
h
ECE REGULATION NO: 10.02 STU
Appendix to Type Approval Communication Certificate No: 10R-023794
concerning the type approval of an electrical/electronic sub-assembly under Regulation No: 10
1.
Additional information
1.1.
Electrical system rated voltage:
1.2
This ESA can be used on any vehicle type with the following restrictions: 12 V negative ground
1.2.1
Installation conditions, if any: See manufacturer’s instructions
1.3
This ESA can be used only on the following vehicle types: Not applicable
1.3.1
Installation conditions, if any: Not applicable
1.4
The specific test method(s) used and the frequency ranges covered to determine immunity were:
(Please specify precise method used from Annex 9): 20 to 1000MHz free field 30 V/m
1.5
Approved/accredited laboratory (for the purpose of this Regulation) responsible for carrying out
the test: SGS EMC Services Durham
2.
Remarks: None
UK
28-Apr-06
A
pp
ity
Delete where inapplicable
or
(1)
12 V. negative ground
roval Aut
3
h
4171
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
Rev 1/03
COMMUNICATION CONCERNING THE APPLICATION OF THE COUNCIL DIRECTIVE OF 20 JUNE
1972 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO A
TYPE OF COMPONENT WITH REGARD TO RADIO INTERFERENCE SUPPRESSION
(72/245/EEC) AS LAST AMENDED BY 95/54/EC
Type Approval No: e11*72/245*95/54*3794*00
Reason for Extension: Not applicable
SECTION I
0.1
Make (trade name of manufacturer): Directed Electronics Inc.
0.2
Type and general commercial description(s): Universal fitment alarm system for vehicle
0.3
Means of identification of type, if marked on the component:
VIPER 330V (427V)
AUTOMATE AM1 (427A)
AUTOMATE AM 5 (436A)
HORNET 727T (727T)
0.3.1
Location of that marking:
The model name is usually mounted on the top plastic half of the Enclosure and sides of box.
The model number is mounted on the bottom of the box
0.4
Category of vehicle(2): Not applicable
0.5
Name and address of manufacturer:
A
pp
or
UK
An executive agency of the Department for Transport
28-Apr-06
ity
Directed Electronics Inc
Vista
San Diego
California 92083
United States of America
roval Aut
h
72/245/EEC AS LAST AMENDED BY 95/54/EC
0.7
In the case of components and separate technical units, location and method of affixing of the
EEC type-approval mark:
Initial production label will be fixed to bottom of plastic enclosure. After initial production the
mark will be moulded into the plastic enclosure
0.8
Address(es) of assembly plant(s):
Portman
No 9 Tongfuyu Industrial District
Long Hua Town
Shenzhen
China 518109
SECTION II
1.
Additional information (where applicable): See Appendix
2.
Technical service responsible for carrying out the tests: SGS EMC Services
3.
Date of test report: 28 December 2005
4.
Number of test report: DUR43965/GH/05
5.
Remarks (if any): See Appendix
6.
Place: BRISTOL
7.
Date: 28 APRIL 2006
8.
Signature:
9.
The index to the information package lodged with the approval authority, which may be
obtained on request, is attached.
A. W. STENNING
Head of Product Certification
A
pp
or
UK
28-Apr-06
ity
EAF068974
r o v a l2A u t
h
72/245/EEC AS LAST AMENDED BY 95/54/EC
APPENDIX
1.
Additional information:
1.1
Electrical system rated voltage: 12 V negative ground
1.2
This ESA can be used on any vehicle type with the following restrictions: 12 V negative
ground
1.2.1
Installation conditions, if any: See manufacturer’s instructions
1.3
This ESA can only be used on the following vehicle types: Not applicable
1.3.1
Installation conditions, if any: Not applicable
1.4
The specific test method(s) used and the frequency ranges covered to determine immunity
were: 20 to 1000MHz at 30 V/M Free Field
1.5
Approved/recognised laboratory (for the purpose of this Directive) responsible for carrying out
the test: SGS EMC Services Durham Automotive Chamber
5.
Remarks: None
*
Delete as applicable
(1)
If the means of identification of type contains characters not relevant to describe the vehicle,
component or separate technical unit types covered by this information document/typeapproval certificate, such characters shall be represented in the documentation by the symbol
`?' (e.g. ABC??123??).
(2)
As defined in Annex II A to Directive 70/156/EEC.
A
pp
or
UK
28-Apr-06
ity
to EEC Type Approval Certificate No: e11*72/245*95/54*3794*00
concerning the type approval of an electric/electronic sub-assembly with
regard to Directive 72/245/EEC as last amended by Directive 95/54/EC
r o v a l3A u t
h
4171
APPROVAL NUMBER: e11*72/245*95/54*3794*00
INFORMATION PACKAGE CONTENTS
INDEX
REVISION NUMBER: Not applicable
Total number of sheets:
Reasons for Revision:
53 (Fifty three)
Number of separate drawings:
0 (Nil)
Number of separate photographs:
0 (Nil)
Not applicable
EAF068974
Revision date
&
Office stamp
A
pp
or
UK
28-Apr-06
ity
An executive agency of the Department for Transport
roval Aut
h
4171
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
Rev 1/03
COMMUNICATION CONCERNING THE APPROVAL GRANTED OF A
TYPE OF VEHICLE ALARM SYSTEM (VAS) PURSUANT TO PART I OF
REGULATION NO: 97.01
Approval No: 97R- 012245
1.
Trade name or mark of the VAS:
HORNET 727T
VIPER 330V, AUTOMATE AM1, AUTOMATE AM5 and
2.
Type of VAS: Universal fitment alarm system for vehicle
3.
Manufacturer's name and address:
Directed Electronics Inc
Vista
San Diego
California 92083
United States of America
4.
If applicable, name and address of manufacturer's representative:
Directed Electronics Inc
Unit C, Longmead Business Centre
Blenhiem Road
Epsom
KT19 9QQ
United Kingdom
5.
Brief description of the VAS and of the immobilizer (if applicable):
Type of vehicle on which the VAS has been tested: FORD Sierra 1.6L 5 door
7.
System submitted for approval on: 27 July 2005
UK
An executive agency of the Department for Transport
28-Apr-06
A
pp
or
6.
ity
Vehicle 12 volt alarm system with sensors/triggers for: ignition, door, boot, bonnet and shock.
Back up siren with remote control setting and un-setting
roval Aut
h
ECE REGULATION NO: 97.01 PART I
8.
Technical service responsible for conducting approval test: SGS EMC Services
9.
Date of test report issued by that service: 28 December 2005
10.
Number of test report issued by that service: DUR43965/GH/1/05
11.
Approval GRANTED:
12.
Reason(s) for extension of approval: Not applicable
13.
If applicable, position of the approval mark(s) on the main component:
Initial production label will be fixed to bottom of plastic enclosure. After initial production the mark
will be moulded into the plastic enclosure.
14.
Place: BRISTOL
15.
Date:28 APRIL 2006
16.
Signature:
17.
The following documents, bearing the approval number shown above, are retained by the issuing
authority:
A. W. STENNING
Head of Product Certification
-
list of components, duly identified, constituting the VAS; Main control unit. Siren unit.
Remote control, Cable harness.
-
list of files deposited with the Administrative Service which granted type approval, and which
can be obtained upon request.
EAF068974
A
pp
or
UK
28-Apr-06
ity
* Delete where inapplicable
roval Aut
2
h
4171
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
Rev 1/03
COMMUNICATION CONCERNING THE GRANTING OF EEC TYPE APPROVAL OF A SEPARATE
TECHNICAL UNIT OF A VEHICLE ALARM SYSTEM WITH REGARD TO DIRECTIVE 74/61/EEC AS
LAST AMENDED BY 95/56/EC
Type Approval No: e11*74/61*95/56*2245*00
Reason(s) for Extension: Not applicable
SECTION I
0.1
Make (trade name of manufacturer): Directed Electronics Inc
0.2
Type and general commercial description(s): Universal fitment alarm system for vehicle
0.3
Means of identification of type if marked on the separate technical unit:
VIPER 330V (427V)
AUTOMATE AM 1 (427A)
AUTOMATE AM 5 (436A)
HORNET 727T (727T)
0.3.1
Location of that marking:
The model name is usually mounted on the top plastic half of the enclosure and sides of the
box. The model number is mounted on the bottom of the box
0.4
Category of vehicle(2): Not applicable
0.5
Name and address of manufacturer:
28-Apr-06
A
pp
or
UK
An executive agency of the Department for Transport
ity
Directed Electronics Inc
Vista
San Diego
California 82083
United States of America
roval Aut
h
74/61/EEC AS LAST AMENDED BY 95/56/EC (VEHICLE ALARM SYSTEM)
0.7
In the case of components and separate technical units, location and method of affixing of the
EEC type approval mark:
Initial production label will be fixed to bottom of plastic enclosure.
After initial production the mark will be moulded into the plastic enclosure.
0.8
Address(es) of assembly plant(s):
Portman
No 9 Tongfuyu Industrial District
Long Hua Town
Shenzhen
China 518109
SECTION II
1.
Additional information (where applicable): See Addendum
2.
Technical service responsible for carrying out the tests: SGS EMC Services
3.
Date of test report: 28 December 2005
4.
Number of test report: DUR43965/GH/1/05
5.
Remarks (if any): See addendum
6.
Place: BRISTOL
7.
Date: 28 APRIL 2006
8.
Signature:
9.
The index to the information package lodged with the approval authority, which may be
obtained on request, is attached.
A. W. STENNING
Head of Product Certification
A
pp
or
UK
28-Apr-06
ity
EAF068974
roval Aut
2
h
74/61/EEC AS LAST AMENDED BY 95/56/EC (VEHICLE ALARM SYSTEM)
1.
Additional information:
1.1
Trade name or mark of the alarm system: VIPER 330V, AUTOMATE AM 1, AUTOMATE AM
5, and HORNET 727T
1.2
Type of the alarm system: Universal fitment alarm system for vehicles
1.3
Brief description of the alarm system: 12 volt alarm system with back up siren, main module
with remote control key, with triggers for ignition, door, boot, bonnet, shock.
1.4
List of vehicles to which the alarm system is intended to be fitted: Any negative12 volt vehicle
1.5
Types of vehicle on which the alarm system has been tested: Ford Fiesta 1.6L 5 door
1.6
List of main components, duly identified, comprising the alarm system: Siren module, Main
control module, cable harness, remote control.
5.
Remarks: None
*
Delete where applicable
(1)
If the means of identification of type contains characters not relevant to describe the vehicle,
component or separate technical unit types covered by this type-approval certificate, such
characters shall be represented in the documentation by the symbol `?' (e.g. ABC??123??).
(2)
As defined in Annex II A to Directive 70/156/EEC;
A
pp
or
UK
28-Apr-06
ity
Addendum to EEC Type Approval Certificate No: e11*74/61*95/56*2245*00
concerning the type approval as a separate technical unit/component* of a
vehicle alarm system with regard to Directive 74/61/EEC,
as last amended by Directive 95/56/EC
roval Aut
3
h
4171
APPROVAL NUMBER: e11*74/61*95/56*2245*00
INFORMATION PACKAGE CONTENTS
INDEX
REVISION NUMBER: Not applicable
Total number of sheets:
Reasons for Revision:
53 (Fifty three)
Number of separate drawings:
0 (Nil)
Number of separate photographs:
0 (Nil)
Not applicable
EAF068974
Revision date
&
Office stamp
A
pp
or
UK
28-Apr-06
ity
An executive agency of the Department for Transport
roval Aut
h
Technical Construction File – Directed Electronics
427 Series.
Document Ref 95/56 / 95/54 / Reg97 / Reg10 Directives.
Section 0
General Details
Contact –
Shaun Findley
Technical Manager
Directed Electronics Inc., Unit C, Longmead Business Centre, Blenheim Road
Epsom, KT.19. 9.QQ.
Section 0.1
Make. State the commercial/name(s)
Directed Electronics Inc.
Section 0.2
Type and General Commercial Description.
Universal fitment alarm system for vehicle.
Section 0.3
State the model number and name of the product,
Viper 330V (427V)
Automate AM 1 (427A)
Automate AM 5 (436A)
Hornet 727T (727T)
Section 0.3.1
State where the model number is situated on the product, and
how it is marked,
The model name is usually mounted on the top plastic half of the enclosure and
sides of box. The model number is mounted on the bottom of the box.
Section 0.5
Name and address of Manufacturer
Directed Electronics Inc., Vista, San Diego, California, 92083, USA.
Section 0.5.1
Name and address of Manufacturer's representative inside the
European Union (if applicable).
Directed Electronics Inc.
Unit C, Longmead Business Centre, Blenhiem Road, Epsom, KT.19. 9.QQ
Section 0.7
State how and where the type approval mark will be affixed
Initial production label will be fixed to bottom of plastic enclosure.
After initial production the e-mark will be moulded into the plastic enclosure.
Section 0.8
Address(es) of assembly plants
A
pp
or
UK
28-Apr-06
ity
Portman, No. 9 Tongfuyu Industrial District, Long Hua Town, Shenzhen, China,
518109
roval Aut
h
Section 1
This product shall be approved as a component/STU (delete as
applicable)
Component
Section 2
Restrictions of use and conditions for fitting.
Universal Fitment. Alarm system can be fitted to any 12-volt negative earth
vehicle.
Installation guides are included in the TCF for further detail.
System has 3 methods of setting and un-setting –
Setting – 433.92MHz RF remote control (2⁶⁶ Code differs) or passively set
(Programmable) or controlled by door lock/indicator flash pulse from vehicle
Un-setting - 433.92MHz RF remote control (2⁶⁶ Code differs) or valet Pin code via
system valet switch or controlled by door lock/indicator flash pulse from vehicle
Section 2.1
Main component list inside front cover of Instruction/User guides ( section 3)
Section 2.2 Engineering Schematics
Alarm PCB
Receiver PCB.
Section 2.2 Mechanical Drawinds
Full system Bill of materials
Section 3
The Viper 330V is the parent item (therefore test unit) as it is fully populated PCB
including a shock sensor.
Section 3.1
All system/User Guides are included at the back of this section. The product does
not require any maintenance other than remote control battery replacement ( see
user guide for instructions ).
In order –
Viper 330V install guide
Viper 330V user guide
UK
28-Apr-06
A
pp
ity
Test reports to be added by SGS
or
Section 4
roval Aut
h
1
2
3
4
F
F
E
E
(BLUE)
(6.8MM BLUE)
DARK BLUE
RED
D
D
(1500MM)
C
C
DARK BLUE
RED
(WHITE 2.54MM)
B
B
Directed Electronics Inc.
Phone: 760-598-6200
One Viper Way
Vista, CA 92083
Title:
A
(A8634) Blue LED
Size: Number:
Revision:
B
150-0088
A
Date Code: 1L
Sheet 1 of
2
A
X:\DOC CONTROL\ITEM MASTER\150 - 199\150-199.Ddb - Documents\150-0088(A).sch
3
4
UK
File:
1
Fax: 760-598-6400
Appd By Tyson M
2001 8 7
Date
Chkd By
Date
Drwn By FRANK SHEE
1 Date
2001 5 12
28-Apr-06
A
pp
ity
1. ADD PART NUMBER 150-0088
or
REV A
th
1
2
3
4
F
F
E
E
HEAT SHRINK TUBING
GREY
BLACK
D
D
(1830 MM)
C
C
GREY
BLACK
(BLUE 2.54MM)
B
B
Directed Electronics Inc.
One Viper Way
Vista, CA 92083
Title:
1
2
3
4
A
UK
Fax: 760-598-6400
Appd By Tyson M
2000 5 5
Date
(K538) Valet Switch w/ Connector
Chkd By
Size: Number:
Revision: Date
B
150-0006
A
Drwn By FRANK SHEE
Date Code:
Sheet 1 of 1 Date
2000 4 10
File: X:\DOC CONTROL\ITEM MASTER\150 - 199\150-199.Ddb - Documents\150-0006(A).SCH
Phone: 760-598-6200
A
28-Apr-06
A
pp
ity
1. ADD PART NUMBER 150-0006
or
REV A
th
1
2
3
4
5
6
D
D
GREEN
BLUE
C
C
(WHITE 2.54MM)
1400MM
NOTES: 1. ALL USE UL1007 22 AWG WIRE
B
B
70 MM
Directed Electronics Inc.
REV B
1. CHANGE 150MM->500MM 1/17/95
REV C
1. CHANGE 500MM -> 1400MM 6/19/98
2. ADD PART NUMBER 150-0009
A
One Viper Way
Vista, CA 92083
Fax: 760-598-6400
Appd By Ken Manivone
08/08/02
Date
(8294) low current door-lock harness
Chkd By Kenny Snoddy
Size: Number:
Revision: Date
08/08/02
B
150-0009
C
A Shee
Drwn By Frank
pp
Date Code:
Sheet 1 of 1 Date
08/07/02
roval
File: X:\DOC CONTROL\ITEM MASTER\150 - 199\150-199.Ddb - Documents\150-0009(C).SCH
Phone: 760-598-6200
Title:
28-Apr-06
A
2
3
4
5
6
or
UK
1
Au
th
1
2
3
4
5
6
D
D
A2001T
RED
BLACK
BLUE
GREEN
(AN)
C
C
152MM
NOTES: 1. ALL USE UL1007 26 AWG WIRE 1500MM
B
B
Directed Electronics Inc.
Fax: 760-598-6400
Appd By Minas Minasian
07/26/02
Date
4-pin sensor harness
Chkd By Kenny Snoddy
Size: Number:
Revision: Date
07/26/02
B
HWAN400B
A
A Shee
Drwn By Frank
pp
Date Code:
Sheet 1 of 1 Date
03/09/95
roval
File: X:\DOC CONTROL\ITEM MASTER\150\150.Ddb - Documents\150-0142(A).SCH
Phone: 760-598-6200
Title:
60 MM
A
One Viper Way
Vista, CA 92083
28-Apr-06
A
2
3
4
5
6
or
UK
1
Au
th
A
pp
or
UK
28-Apr-06
roval Aut
h
1
2
4
3
427A, G, M, G436A, G
H
H
IC3
ANT1
78L05
ANT
OUT
1
2
ANT
GND
N11
10K
2907AS
R8
(2F)
10K
RF
TX
3
(WHITE)
R1
560K
HORN-
N1
R15
SW D/L
220K
BROWN
1
GREEN
2
ARME INPUT
RED
DISARME DEFEAT INPUT
BLUE
TRUNK BYPASS
GRAY
CH4-
R10
4004
10K
F
R16
D7
R11
4004
10K
4
+12V
BROWN
SIREN(+)
YELLOW
ACC
GND
5
6
7
10K
D6
DOOR(+)
BLUE
INST(-)
16
B
WHITE
11
330K
2N5551
1K
D9
15
D10
4004
2N5551
RC4/SDI/SDA
2
4004
42
4004
GREEN
R4
10K
22
PURPLE
2N5401
+12V-A
39
4004
3
R48
14
10
BLACK/WHITE
(1206)
RA3/AN3/VREF
C40
IC1B
2003A
0.1U
RD2/PSP2
40
RC0/T1OSO/T1CKI
330K
21
2
10
15
0.01U
BROWN
A
(1206)
+12V
R23
32
R47
D14
470
4004
R53
1K
TR9
TIP42C(A1046)
TR8
100 1/4W
BROWN
2222A
RA2/AN2
(R1P,1P)
C10
0.1U
D15
0.1U
D18
C43
4004
0.01U
4004
R54
(L6,L7)
100
1K
4.7K
BLUE
41
R58
IC1A
20K
2003A
1
330K
20
330K
R57
1
RC2/CCP1
4
36
6
0.1U
R56
10
RED/WHITE
0.01U
RB7 17
19
IC1D
RB7
RA0/AN0
R51
2003A
RD0/PSP0
38
4
10
13
0.01U
R61
R24
FC3
IC1E
47K
1K
0.01U
1
3
ORANGE
2
BLACK
1
0.01U
RC7/RX/DT
RC3/SCK/SCL
37
5
10
12
PURPLE/BLK
C
RC6/TX/CK
C
C22
(1206)
0.01U
TX
R60
TX
R52
2003A
RX
44
FC4
WHITE/BLUE
B
C19
+5V
PC
D
(WHITE)
C20
(1206)
N7
LED
0.01U
(1206)
+12V-A
RED
0.1U
R50
11
RD6/PSP6
2.2K
C
BLUE
C12
22K
(BLUE)
RED
2
RA1/AN1
2003A
R37
33K
T5
C13
1
0.1U
R55
2
BLACK
E
1.3K
C11
IC1F
GREY
R59
16
C21
330K
VALET
N6
R35
R36
N5
VZ
8
R43
RD3/PSP3
9
+12V-A
+12V-A
D
E
THRU-HOLE (AXIAL)
34
33
C9
330K
C41
R49
C945
R22
F
0.01U
4004
D19
R32
TR5
T3
PROGRAM
100U/50V
C8
R33
10K
BLUE
IC1C
2003A
NC
NC
R13
RED
1
C38
RD4/PSP4
+12V-A
4.7K
2
1
2
3
4
5
TR4
R41
1K
HORN
R42
GREEN
0.01U
330K
1.5K
D13
D12
0.01U
470R
RB5
D11
C37
3
+5V
VPP
RB7
RB6
GND
VDD
Master Clear
DATA
CLOCK
GND
N4
RB2
0.1U
R46
GWA(-)
N9
4004
D/L
DOME
E
0.01U
D16
4004
2N5401
4004
C7
T4
D17
TR3
NC
NC
10
C33
10K
R34
3K
YELLOW
JUMP(10A)
R5
R40
470R
TR7
R45
R30
CH3-
51R/1W
GND
C18
R31
3K
T2
+12V
812H-1C-H
UNLOCK
RD1/PSP1
LIGHT(+/-)
ORANGE
12
43
R27
DOOR(-)
WHITE/BLUE
12
13
RC5/SDO
0.1U
1.5K
BLACK/WHITE DOME-
9
10
RB6
C6
R29
(+)TRUNK BYPASS
7D220K
R28
10
J1
R26
4004
4004
Z1
RB1
0.1U
R12
220K
G
+12V-B
NC
ZD1
1N4750 1W
7
LOCK
PURPLE
WHITE
IC1G
35
C5
D5
R17
GROUND
GREEN
8
R80
RA4/T0CKI
9
RB5
+12V
4004
TR6
MAIN
3
D3
TR2
D882
K1
RB6
560K
CH2-
ORANGE
2.7K
3
2003A
4004
R3
2
7
RD5/PSP5
+5V
RED/WHITE
0.01U
5
VSS
R20 1K
RC1/T1OSI/CCP2
D8
220K
N3
DO
RB0/INT
23
F
C4
6
DI
0.1U
4004
560K
7
7
CLK
C2
LIGHT FALSH MONITOR INPUT (WHITE)
1
RB4
8
5
YELLOW/BLK
3
C17
8
VCC
VZ
R2
C
2
4
+5V
6
26
CS
R25
D1
A
4
1
220U/25V
(TANT)
93C66
10K
25
RF DATA
D2
3
PURPLE/BLK
27
10U/16V
-+
DISARME INPUT
RE1/WR/AN6
RE0/RD/AN5
+5V
3
4
5
6
MCLR/VPP
14
RF
G
18
NC
IC2
R21
IN
GND
C16
RE2/CS/AN7
FC1
1K
2
+5V
TP
GND
DO
VPP
R19
0.01U
1
NC
100R
0.1U
C42
0.1U
R66
C1
4
FC2
VDD
TR1
N2
C3
VDD
R9
T1
28
+5V
680
(BLACK)
D4
+12V-A
R64
4.7K
BLACK
3
RED
4
103P
R70
R71
47K
47K
560K
OSC1
+5V
4004
10K
D21
C15
4004
0.1U
11
B304
+12V-B
C28
0.47uF/16V
R76
OSC2
+12V-B
102P
C29
U1C
100K
C24
4148
4.0M
8
470K
4148
D25
R75
R72
330K
4148
C25
U2
LM324A
103
D28
4148
B
60ms<Light <250ms
Heavy>250ms
+12V-B
R74
2.2uF/16V
U1B
7
C30
10K
+
SK1
4.7K
105P
10
104
R73
D24
R77
9
LM324A
C27
31
10K
R65
100K
LIGHT MONITOR
RB3
D26
4148
XTAL1
R7
6
220K
0R
C26
+
3
30
R14
F
R18
LM324A
560P
D23
D20
R6
1
2
0.1U
E
0.01U
U1A
VAR1
R69
390K
C23
C14
330K
R68
100K
RD7/PSP7
MUX2
R39
C39
B
5
VSS
BLUE
2
330K
VSS
1
24
29
GREEN
RA5/SS/AN4
R62
11
SENSOR
MUX1/SHOCK
R38
4
R44
+12V-B
100K
4148
N8
240K
U1D
6
13
R67
5
14
100K
PIC16F77(QFP)
LM324A
12
D27
+12V-B
4148
C31
102
N10
R79
OPTION
4.7K
2
R63
330K
RB5
R78
1
330K
(BLACK)
C36
0.1U
A
A
Drwn By
Date
Date
427A, G, M, 436A, G
4
Size: A4
Number: 170-0021
File: 427M-G.sch
3
Revision: G
Vision
Date: 2004/09/24
PORTMAN SECURITY SYSTEM INT'L
SHENZHEN, CHINA
Tel: 86-755-8140190 (10 lines)
Fax: 86-755-8140201
Date: 27-Jan-2005 Time: 08:57:10
4
Sheet 1
28-Apr-06
of 1
UK
2
Chkd By
Title
3
5
1
Appd By
Date
A
pp
ity
Change shock sensor circuit
2
or
CHANGE
1
th
1
2
3
4
5
6
D
D
2 RED
J6-2( BROWN)
BL2
J5-2( RED)
J 3mm
J1-2( BLUE)
0 BLACK
J3-2( YELLOW)
BL1
J2-2( GREEN)
NP 22U
J4-2( ORANGE)
R10
5mm
C1
R1
R2
1K
1K
D1
3.9V
R4
390
D2
4002
2
3
4
5
6
7
8
P1 BLACK
A1
X3
470K
VDD
K5
K4
K6
SP1
PWRP
17
C
SP
NTK025
X1
VSS
R5
K3
15
TEST3
120K
X2
K2
14
TEST2
R3
K1
C
SP2
R6
1
680
12
J10
13
TR2
C945
SP1
10
18
9
16
TR5
1116
TR1
INITIAL
CONTROL
11
TR3
1116
C2
SP2
TR4
TR6
1616
1616
C945
0.01U
R8
68
BL
B
R7
680
BLA
B
R9
68
Directed Electronics Inc.
One Viper Way
Vista, CA 92081
Fax: 760-598-6400
Appd By
Date
514J multitone siren w/ soft chirp
Chkd By
Size: Number:
Revision: Date
B
170-0145
A
A
Drwn By JACKY
pp
Date Code:
Sheet 1 of 1 Date
2004.01.08
roval
File: X:\DOC CONTROL\ITEM MASTER\170\170.Ddb - Documents\170-0145(A).Sch
Phone: 760-598-6200
Title:
A
28-Apr-06
A
2
3
4
5
6
or
UK
1
Au
th
1
2
3
4
D
D
SPKR
6.2
6.2
R1
R2
SP1
C
P1
SW2
SW1
R3
18
R4
18
1
2
3
4
8
7
6
5
HEADER
R5
R6
36
36
1
2
3
4
5
6
C
12
11
10
9
8
7
J1-2
J2-2
J3-2
J4-4
J5-2
J6-2
SIP SW
B
B
Directed Electronics Inc.
One Viper Way
Vista, CA 92081
Fax: 760-598-6400
Appd By
Date
514J TONE SELECTION
Chkd By
A
Size: Number:
Revision: Date
A
170-0260
A
Drwn By JACKY28-Apr-06
Date Code:
2004.01.08
Sheet 1 of 1 Date
A
pp
h
File: X:\DOC CONTROL\ITEM MASTER\170\170.Ddb - Documents\170-0260(A).SCH
roval Aut
Phone: 760-598-6200
A
UK
1
2
3
4
or
Title:
A
pp
or
UK
28-Apr-06
roval Aut
h
A
pp
or
UK
28-Apr-06
roval Aut
h
pp
ity
A
or
UK
28-Apr-06
roval Aut
h
Printed 3/15/2006
Assy Tree for: 427V(C), 010-0034
010-0034
FGI, SEC, VIPER 330V, OEM UPGRADE SECURITY SYSTEM
Type
CAT
DEI P/N
427V
Revision
C
Brand
12
Status
R
M/C Size, Qty
16 3/4"x15 1/2"x12 3/4",18
Date
8/31/2004
Unit Weight
2.00 lbs, M/C 37.35 lbs
By
TM
Barcode
0 93207 00855 9
REV C: D/C 5L 01->02/06,BLUE HI-LITER ON D/C STICKER, PURGE STOCK, FLASH MCU SOFTWARE IS NOW REV D, ADD ADDENDUM (ECF5845)
REV B: D/C 5F, 08/01/05, REVISE DIAGRAM IN IG, WAS 01-05 IS 05-05 (ECF5700), -D/C 5C 05/02/05, INCLUDE PORTMAN 514N IN KIT FROM FACTORY, ROLL 100-0081 BOM INTO
010-0034 W/SIREN. M/C QUANTITY WAS 16, IS 18 (ECF5640)
REV A: D/C 4L, 01/26/05 (ECF_______), WEIGHTS: 1.40 lbs, M/C 24.20 lbs. REWORK 100-0081 TO ADD 100-0049 NUTEK 514N(B) UNTIL PORTMAN 514N IS READY
FOLDER 401-4040
Qty
Top
DEI P/N
P/N
427V
010-0034
C
Rev
Title
Detail
Vendor
Vend-P/N
FGI, SEC, VIPER 330V, OEM
UPGRADE SECURITY SYSTEM
PORTMAN
427V
PORTMAN
514N
Vend-Desc
.1
1
514N
100-0082
XA
KA, INAC, 514N, 6 TONE, NEO,
SOFT CHIRP,PM
..1
1
A514N
127-0013
X1
FA, INAC, SIREN, 514N
STD, 6 TONE, NEO, 6.4 OHM
PORTMAN
A514N
...1
1
170-0039
X1
PCBA, SIREN, SELECTABLE
6-TONE
DIP, SR1856-B
PORTMAN
SR1856-B
SR1856-B(b).SC
H??
....1
1
200-0036
X1
PCB, SIREN, SR1856-B
SS, TH, DIP
PORTMAN
SR1856-B
SR1856-B(b).PC
B??
....2
1
212-0006
X1
IC, CUSTOM,
PROGRAMMABLE 6-TONE
SIREN, SOFT CHIRP
18-PIN DIP
PORTMAN
<<NEED PN>>
<<NEED SPEC>>
...2
1
300-0009
X1
SPEAKER
ASSMEBLY,NEODYMIUM
PORTMAN
<<NEED PN>>
<<NEED FILE>>
....1
1
250-0011
X1
SPEAKER MOTOR/ DIAPHRAM
<<NEED VALUES>>
PORTMAN
<<NEED PN>>
<<NEED FILE?>>
....2
1
610-0028
X1
STAMPED METAL RETURN
CUP STACK
FRONT PLATE
PORTMAN
<<NEED PN>>
<<NEED FILE>>
....3
1
610-0029
X1
STAMPED METAL RETURN
CUP STACK
CENTER PLATE
PORTMAN
MT45-45-2733B
<<NEED FILE>>
....4
1
610-0030
X1
STAMPED METAL RETURN
CUP STACK
BACK PLATE, WITH
NEODYMIUM SLUG
PORTMAN
MT50-45-4003B
<<NEED FILE>>
....5
1
620-0283
X1
PLASTIC
HOUSING,SIREN,HORN
REFLECTOR,FRONT COVER
PORTMAN
PL10-00-1850
<<NEED FILE>>
Company Confidential
010-0034
28-Apr-06
Page 1 of 4
UK
Directed Electronics, Inc.
One Viper Way, Vista, California 92081, USA
760-598-6200 Fax 760-598-6400
A
pp
or
Item
roval Aut
h
Assy Tree for: 427V(C), 010-0034
010-0034
Rev C
FGI, SEC, VIPER 330V, OEM UPGRADE SECURITY SYSTEM
Printed 3/15/2006
Qty
....6
DEI P/N
P/N
Rev
Title
1
620-0284
X1
....7
1
620-0285
...3
1
...4
Detail
Vendor
Vend-P/N
Vend-Desc
PLASTIC SIREN HORN
THROAT,DIAPHRAM COVER
PORTMAN
PL20-01-1850
<<NEED FILE>>
X1
PLASTIC DIAPHRAM
CENTERING RING
PORTMAN
PL21-01-1850
<<NEED FILE>>
530-0010
A
LABEL, DATE CODE
19MM X 6MM, CAPSULE
SHAPE
1
610-0027
X1
BRACKET, SIREN/ SPEAKER,
STRAIGHT,
1.2T SPCC-SD IRON, PAINTED PORTMAN
BLACK
MT30-01-1850??
<<NEED FILE>>
...5
1
620-0282-01
X1
PLASTIC HOUSING,
SIREN/SPEAKER, HORN, MINI
DEI LOGO, 514N, PM
PORTMAN
PL00-00-1850
<<NEED FILE>>
...6
1
620-0286
X1
PLASTIC RING,STAND-OFF,
PCB MOUNT
3.75MM
PORTMAN
PL22-01-7504
<<NEED FILE>>
...7
1
640-0005
X1
MOLDED RUBBER, PLUG/
STRAIN RELIEF,
SIREN/SPEAKER
W/O "HANDLES"
PORTMAN
<<NEED PN>>
<<NEED FILE>>
..2
1
520-0109
95MM x 90MM x 83MM, (UPC 0
93207 51414 2)
PORTMAN
<<NEED PN>>
...1
1
N514N
DIRECTED
N514N
..3
1
S&ACC-2 910-0013
.2
1
100-0150
..1
1
A8634
..2
1
..3
520-0001ART
___-___ GB,514N 6-TONE REVENGER
SIREN
1/04
ART, 514N
BLUE PRINTING
8.0
QUALITY, CONTROL PLAN
S&ACC-2
A
KA, 427V HARNESSES
INCL: ALL HARNESSES IN
POLYBAG
PORTMAN
<<NEED PN>>
150-0222
A
HRN, LED, 2.54MM 2-PIN,
2-WIRE, CON/ BLUE LED
26AWG, 1500MM, (BONDED
BLU,RED)
PORTMAN
SF30-LD-A8634
<<NEED FILE>>
K538
150-0223
XA
HRN, SWITCH, 2.54MM,
22AWG, 1800MM, BONDED
2-PIN,2-WIRE, VALET SW,
(GRY,BLK)
MOMENTARY, SNAP FIT, BLUE
CON/ SW
PORTMAN
WR90-25-K538
<<NEED FILE>>
1
A8295
150-0232
A
HRN, 2.54MM, 3-PIN, 2-WIRE,
WHITE CON/WIRE
22AWG 1400MM,
(BLU,EMPTY,GRN)
PORTMAN
WR90-25-8295
WR90-25-8295(A)
.DWG
..4
1
H508
150-0235
X1
HRN,2.0MM,4-PIN,4-WIRE
WHITE CON/WIRE
26AWG,152MM,(GRN,BLU,BLK, PORTMAN
RED)
WR90-25-8292
<<NEED FILE>
..5
1
A8291?
150-0236
X1
HRN,2.54MM,7-PIN,7-WIRE
WHITE CON/WIRE
22AWG,1400MM,(BRN,GRN,RE PORTMAN
D,BLU,GRY,VIO/BLK,YEL/BLK)
WR90-25-8291
<<NEED FILE>>
..7
1
150-0248
XA
HRN,DOOR UNLOCK PULSE
ADAPTER
22AWG,4"(BLU/WHT,BLK/WHT, PORTMAN
WHT/BLUE),INCLUDES
1N4004,6.2M 1/4
RES,0.47uF,25V CAP
<<NEED P/N>>
<<NEED FILE>>
Company Confidential
010-0034
28-Apr-06
Page 2 of 4
UK
Directed Electronics, Inc.
One Viper Way, Vista, California 92081, USA
760-598-6200 Fax 760-598-6400
A
pp
or
Item
roval Aut
h
Assy Tree for: 427V(C), 010-0034
010-0034
Rev C
FGI, SEC, VIPER 330V, OEM UPGRADE SECURITY SYSTEM
Printed 3/15/2006
Qty
DEI P/N
P/N
.3
1
A427V
121-0112
..1
1
...1
Rev
Title
Detail
Vendor
Vend-P/N
Vend-Desc
D
FA, CTRL, SECURITY, VIPER
330V, SERIALIZED, OEM
UPGRADE
PCB:427, IC:PG427B200DE103
PORTMAN
A427V
<<NEED ASSY
DWG?>>
170-0021
G
PCBA, CTRL, 427, W/SHOCK,
QFP, 427M-F
PORTMAN
427M
<<NEED FILE>>
1
200-0012
G
PCB, CPU, 427M
DS, SMT, TH, QFP, ICSP
PORTMAN
427M
<<NEED FILE>>
...2
1
211-0043
D
IC, MCU, 427/ 436
TFQP-44
PORTMAN
PG427B200DE103
....1
1
210-0030-04
A
IC,MCU,CMOS,8-BIT,8-A/D
CHANNEL,8K
FLASH,28/40/44-PIN
TFQP-44
MICROCHIP
PIC16F77-1/PT
210-0030
....2
1
400-0007
C
SW, 427/ 436 SOURCE CODE
PORTMAN
427B03.ASM
400-0007
...3
1
220-0014-05
A
HEADER,2.0MM,TOP ENTRY,
IVORY
5-PIN
JST
B5B-PH-K
220-0014
..2
4
450-0036
A
HDW, SCREW, PANHEAD,
PHILLIPS, BLACK, M3
12MM
PORTMAN
MT21-00-0312
-
..3
1
530-0011
A
LABEL, DATE
CODE,TAMPER-PROOF
20MM x 12MM, RECTANGLE
..4
1
530-0069
A
LABEL, SERIAL NUMBER, 427V WHITE,<<SIZE?>>,
Pyy427xxxxxFORMAT
PORTMAN
PP20-90-427V1
..5
1
620-0272-02
A
PLASTIC HOUSING, CPU TOP,
427,436
VIPER 330V, BLANK LOGO
FOR BADGE
PORTMAN
PL05-AM330V
<< NEED FILE>>
..6
1
620-0273-01
X1
PLASTIC HOUSING, CPU
BOTTOM, 427,436
DIRECTED LOGO, FUSE
DIAGRAM
PORTMAN
PL06-AM-4270
<<NEED FILE>>
..7
1
620-0274-01
X1
PLASTIC SLIDE DOOR, CPU,
427,436
427, 436
PORTMAN
PL07-AM-4270
<<NEED FILE>>
..8
1
670-0009-02
A
BADGE, GEL, ROUND, 28MM
(PM)
VIPER
PORTMAN
PP20-40-427V
<<NEED FILE>>
.4
1
150-0189
A
HRN, 3.96MM 12-PIN, 12-WIRE,
FUSED W/STARTER KILL,
CON/WIRE, W/ UNFUSED
LIGHT FLASH WIRE
20AWG (18 AWG RED, WHT*)
PORTMAN
1400MM, *100MM
(RED/WHT,RED,BRN,YEL,BLK,
VIO,BLU,GRN,BLK/WHT,WHT/B
LU,WHT,ORG) (STARTER KILL
300MM 14AWG BLK, GRN,
20AWG YEL) 15AMP
SF30-WR-0189
<<NEED FILE>>
.5
1
150-0191
A
HRN, 2-WIRE, DUAL DIODE
ISOLATED LIGHT FLASH .156"
CON/(2)WIRE, UNFUSED
18AWG,1300MM, (x2) WHITE,
(x2) 3A DIODES
WR00-16-0191
<<NEED FILE>>
Company Confidential
010-0034
28-Apr-06
Page 3 of 4
UK
Directed Electronics, Inc.
One Viper Way, Vista, California 92081, USA
760-598-6200 Fax 760-598-6400
PORTMAN
A
pp
or
Item
roval Aut
h
Assy Tree for: 427V(C), 010-0034
010-0034
Rev C
FGI, SEC, VIPER 330V, OEM UPGRADE SECURITY SYSTEM
Printed 3/15/2006
Qty
DEI P/N
P/N
.6
1
G427V
500-0108
.7
1
N427V
.8
1
AD427V
.9
Rev
Title
Detail
Vendor
Vend-P/N
01-05
OG, VIPER 330V
COLOR COVER,BW BODY, 4
3/16" x 5 7/8" ?
PORTMAN
SF80-G427V
510-0127
05-05
IG, VIPER 330V
B & W, 4 3/4" x 6 5/8"?
PORTMAN
SF80-N427V
510-0216
12-05
IG, ADDENDUM,427V/727T
SHOCK SENSOR
PROGRAMMING
ORG PAPER, 8 1/2" x 5 3/4"
DIRECTED
AD427V
1
520-0099
11-04
GB, VIPER 330V
COLOR, 7 3/8" x 5 5/16" x 4"
(UPC 0 93207 00855 9)
PORTMAN
PP10-90-427V
.10
2
530-0062
X2
LABEL, DECAL, WINDOW,
VIPER (NO PHONE NUMBER)
1 3/8" x 2 5/8" (35MM x 67MM),
ADHESIVE ,DOUBLE SIDED
PORTMAN
PP20-11-VIPER
.11
1
540-0001
07-00
INSERT, PATENT CARD
5 7/8" X 4"
.12
1
540-0028
A
INSERT,RESPONSE CARD,
XFC01-01
ALL SECURITY BUT
AUTOMATE
DIRECTED
540-0028
.13
1
SNTX/RX- 910-0014
1
4.0
QUALITY, CONTROL PLAN
SNTX/RX-1
MKG-1
Company Confidential
<<NEED FILE>>
540-0028ART(A).
PDF
010-0034
28-Apr-06
Page 4 of 4
UK
Directed Electronics, Inc.
One Viper Way, Vista, California 92081, USA
760-598-6200 Fax 760-598-6400
Vend-Desc
A
pp
or
Item
roval Aut
h
Printed 3/27/2006
Assy Tree for: 514J(A), 127-0006
FA, INAC, SIREN, 514J, DIPSWITCH, JAPAN
PCB: A018 & A032, IC:NTK25
Type
PL
DEI P/N
Revision
A
Brand
Status
R
M/C Size, Qty
Date
6/8/2004
Unit Weight
By
Item
Qty
Top
DEI P/N
P/N
A514J
127-0006
Rev
Barcode
A514J
FINAL ASSEMBLY
Title
Detail
Vendor
Vend-P/N
Vend-Desc
A
FA, INAC, SIREN, 514J,
DIPSWITCH, JAPAN
PCB: A018 & A032, IC:NTK25
NUTEK
SN514J01
911219001(B).D
WG
.1
1
170-0145
A
PCBA, SIREN, SELECTABLE
6-TONE,NO JUMPERS RIBBON WIRE
DIP,A018B
NUTEK
A018B
170-0145(A).SCH
.2
1
170-0260
A
PCBA, SIREN TONE
SELECTION & ATTENUATION,
JAPAN
IC: N/A,PCB:A032
NUTEK
A032
170-0260.SCH
.3
1
300-0001-00
A
SPEAKER, SIREN/ SPEAKER,
NEODYMIUM 8 OHM?
DIRECTED
NUTEK
TA25NFB0
.4
1
530-0010
A
LABEL, DATE CODE
19MM X 6MM, CAPSULE
SHAPE
.5
1
610-0005
C
BRACKET, SIREN/ SPEAKER,
MINI
1.2t SPCC-SD STEEL
NUTEK
MBMS1000-M
.6
1
640-0002
A
MOLDED RUBBER, PLUG/
STRAIN RELIEF,
SIREN/SPEAKER
W/O "HANDLES"
NUTEK
NBM00010
Company Confidential
127-0006
28-Apr-06
Page 1 of 1
UK
Directed Electronics, Inc.
One Viper Way, Vista, California 92081, USA
760-598-6200 Fax 760-598-6400
A
pp
or
127-0006
roval Aut
h
A
pp
or
UK
28-Apr-06
roval Aut
h
pp
or
UK
A
ity
514J
28-Apr-06
roval Aut
h
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
pp
ity
A
or
UK
28-Apr-06
th
No. 1116
TEST REPORT
Automotive
Test of:
Model Number:
Vehicle Security System.
VIPER 330.
SGS Reference :
DUR43965/GH/05.
VCA Reference :
EAF068974.
Applicant :
Directed Electronics Inc.
Date of Receipt:
95/54/EC; 1995. & ECE Reg 10.2*
Annex 7, 8 and 9.
27th July 2005.
Date of Test(s):
6th October to 23rd November 2005.
Test Specification:
Date of Issue:
Issue No:
Conclusion :
28th December 2005.
One.
The sample tested was found to
comply with the standards
This report is issued by the Company subject to its General Conditions of
Service available upon request and accessible at www.sgs.com. Attention is
drawn to the limitations of liability, indemnification, jurisdictional, representative
restrictions of test samples and sample retention policies defined therein.
This report refers only to the sample submitted for test.
This report shall not be reproduced except in full without the written approval of
SGS UK Ltd.
Tests marked:* are not covered by our UKAS accreditation.
Signature
Signature
Test Engineer
Authorised Signatory
G. Thompson G. Hann
F. Huggins A. Reynard G.Hann
Page 1 of 18
A
Member of SGS Group (Société Générale de Surveillance)
pp
or
28-Apr-06
Unit 10, Bowburn South Industrial Estate, Bowburn, Durham DH6 5AD Tel +44 (0)191 377 2000 Fax +44 (0)191
377 2020
Registered in England No. 1193985 Rossmore Business Park, Ellesmere Port, Cheshire CH65 3EN
www.sgs.com
UK
SGS United Kingdom Ltd
ity
WS Auto 01 F02 Rev 3
roval Aut
h
TEST REPORT
Page 2 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
CONTENTS
Page Number
1. Client Information ...........................................................................................................................3
2. Equipment Under Test (EUT) .........................................................................................................3
2.1
Identification of EUT .......................................................................................................................................................3
3. Test Specification, Methods and Procedures ..............................................................................4
3.1 )
Purpose of Test ........................................................................................................................................................4
4. Deviations or Exclusions from the Test Specifications..............................................................4
5. Operation of the EUT During Testing ...........................................................................................4
5.1 Configuration and Peripherals........................................................................................................................................4
5.2 Operating Mode and Environmental Conditions .............................................................................................................4
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
6. Test Results.....................................................................................................................................5
roval Aut
h
TEST REPORT
Page 3 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
1. Client Information
Company Name:
Directed Electronics Inc.
Address:
Unit C, Longmead Business Centre,
Blenheim Road,
Epsom,
KT19. 9QQ.
Contact Name:
Mr. Shaun Findley
Telephone:
01372.847147
Facsimile:
01372.847149
2. Equipment Under Test (EUT)
Model Number:
VIPER 330.
Unique Identifier:
PO 402427000124
Description of EUT:
Vehicle security system – Alarm, with the
following sensors: Ignition, Door, Boot, bonnet
and shock. Setting and un-setting via remote
control. With a back up siren module.
Supply Voltage:
12 volts DC.
Accessories Supplied:
None
UK
28-Apr-06
A
WS Auto 01 F02 Rev 3
pp
ity
Identification of EUT
or
2.1
roval Aut
h
TEST REPORT
Page 4 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
3. Purpose of Tests
To perform the relevant tests and assess the product for compliance with the above specification.
4. Deviations or Exclusions from the Test Specifications
There were no deviations from the test specifications.
The scope of the inspection is limited to what is specified in the clients instructions and does not include
any other checks or tests.
5. Operation of the EUT During Testing
5.1
Configuration and Peripherals
Peripheral or support equipment was required for the tests.
5.2 Operating Mode and Environmental Conditions
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
The operating modes and environmental conditions used for each individual test are
described in the test results section of this report.
roval Aut
h
TEST REPORT
Page 5 of 18
6.
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
Test Results
1
Test Specification
95/54/EC 1995.
2
Purpose Of Test
To perform the relevant tests and assess the product for
compliance with the above specification.
3
Methods and Procedures.
The following tests are called up by the test specification:-
Date
Description
Applicable
95/54/EC
1995
Narrowband Emissions.
Yes
95/54/EC
1995
Broadband Emissions
Yes
95/54/EC
1995
Radiated Immunity
Yes
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
Standard
roval Aut
h
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
TEST REPORT
Page 6 of 18
Operation of E.U.T. During Testing
Operating Environment
Power Supply:
Volts
13.5 DC.
Environmental conditions:Temperature:
o
C
19
Relative Humidity:
%
36
Barometric Pressure:
mbar
1010
Configuration & Peripherals
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
Peripherals were attached to the EUT during testing.
LED’s were connected to monitor input/outputs.
roval Aut
h
TEST REPORT
Page 7 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
Summary of Test Results
Standard
Test
95/54/EC
Narrowband Emissions
95/54/EC
Broadband Emissions
95/54/EC
Radiated Immunity
Result
Complied
Complied
Complied
Result
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
In the configuration tested the EUT complied with the specification.
roval Aut
h
TEST REPORT
Page 8 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
Test Results.
General Comments
Details of the test methods used can be found in the SGS EMC
procedures manual.
Modifications Made to the EUT.
No modifications were made to the EUT.
RADIATED EMISSIONS
OPERATING MODE.
13.5 volts DC supply, operating in armed set mode, and again in the
Ignition on un-set mode.
NARROWBAND & BROADBAND EMISSIONS.
TESTS. Were carried out in the vertical and horizontal antenna
polarisation, for the above operating mode.
Within a enclosed anechoic chamber.
EQUIPMENT USED.
1. Rohde & Schwarz Rxer. Ser. No. 825892/019
2. Automotive LISN.
3. Antennas Chase - VBA & EMCO 3146.
PERFORMANCE CRITERIA
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
All emissions are at least 2 dB below the reference limits
For the Vehicle Certification Agency approval.
roval Aut
h
TEST REPORT
Page 9 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
TEST CONFIGURATION: Radiated emissions.
roval Aut
h
TEST REPORT
Page 10 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
VER.POL. SCAN.
09 Nov 2005 15:44
J-FILE 43965. VCA EAF 068974.
VER. POL. PEAK SCAN.
Viper 330
Directed Electronics Inc.
Operating from 13.5 volts DC.
G.T.
95/54/EC. 1995 & Reg 10.2
Armed Mode.
UK
28-Apr-06
A
WS Auto 01 F02 Rev 3
pp
ity
Step
IF BW
Detector M-Time Atten PreAmp OpRge
60kHz 120kHz PK
1msec 0 dB OFF
60dB
or
Start Stop Freq
30MHz 1000MHz
roval Aut
h
TEST REPORT
Page 11 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
VER.POL. SCAN.
09 Nov 2005 16:03
J-FILE 43965. VCA EAF 068974.
VER. POL. PEAK SCAN.
Viper 330
Directed Electronics Inc.
Operating from 13.5 volts DC.
G.T.
95/54/EC. 1995 & Reg 10.2
Ignition On.
UK
28-Apr-06
A
WS Auto 01 F02 Rev 3
pp
ity
Step
IF BW
Detector M-Time Atten PreAmp OpRge
60kHz 120kHz PK
1msec 0 dB OFF
60dB
or
Start Stop Freq
30MHz 1000MHz
roval Aut
h
TEST REPORT
Page 12 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
HOR.POL. SCAN.
09 Nov 2005 15:53
J-FILE 43965. VCA EAF 068974.
HOR. POL. PEAK SCAN.
Viper 330
Directed Electronics Inc.
Operating from 13.5 volts DC.
G.T.
95/54/EC. 1995 & Reg 10.2
Armed Mode.
UK
28-Apr-06
A
WS Auto 01 F02 Rev 3
pp
ity
Step
IF BW
Detector M-Time Atten PreAmp OpRge
60kHz 120kHz PK
1msec 0 dB OFF
60dB
or
Start Stop Freq
30MHz 1000MHz
roval Aut
h
TEST REPORT
Page 13 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
HOR.POL. SCAN.
09 Nov 2005 16:14
J-FILE 43965. VCA EAF 068974.
HOR. POL. PEAK SCAN.
Viper 330
Directed Electronics Inc.
Operating from 13.5 volts DC.
G.T.
95/54/EC. 1995 & Reg 10.2.
Ignition On.
UK
28-Apr-06
A
WS Auto 01 F02 Rev 3
pp
ity
Step
IF BW
Detector M-Time Atten PreAmp OpRge
60kHz 120kHz PK
1msec 0 dB OFF
60dB
or
Start Stop Freq
30MHz 1000MHz
roval Aut
h
TEST REPORT
Page 14 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
RADIATED IMMUNITY.
OPERATING MODE.
13.5 volts DC supply, operating in armed set mode, and again in the
Ignition on un-set mode.
IMMUNITY TESTING.
20 to 1000 MHz Free field
Anechoic chamber test AT 30V/M. (Free field)
NB. A.M. signal with 1 KHz 80% modulation was applied to the above calibrated
levels.
Dwell time was 2 seconds.
Tests were carried out in the above operating mode,
NB. In the anechoic chamber the antenna was in the horizontal polarisation.
EQUIPMENT USED.
Amplifier
Amplifier
Signal generator
Isotropic field monitor
Probe
Antenna/s.
Auto LISN
250L
100W 1000M1
2024
Radi sense
Radi sense
EMCO 3109 & 3146
NNBM
PERFORMANCE CRITERIA
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
The EUT shall not exhibit any malfunction which will cause any
degradation of performance which could cause confusion to other road users or
any degradation in the driver's direct control of a vehicle fitted with the system
which could be observed by the driver or other road user.
roval Aut
h
TEST REPORT
Page 15 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
TEST CONFIGURATION: Radiated immunity.
roval Aut
h
TEST REPORT
Page 16 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
20 to 200 MHz. Free Field.
roval Aut
h
TEST REPORT
Page 17 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
200 to 1000 MHz. Free Field.
roval Aut
h
TEST REPORT
Page 18 of 18
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/05.
Blank Page
A
WS Auto 01 F02 Rev 3
pp
or
UK
28-Apr-06
ity
Last page of report
roval Aut
h
TEST REPORT
Automotive
Test of:
Model Number:
Vehicle Security System.
VIPER 330.
SGS Reference :
DUR43965/GH/1/05.
VCA Reference :
EAF068974.
Applicant :
Test Specification:
Date of Receipt:
Date of Test(s):
Date of Issue:
Issue No:
Conclusion :
Directed Electronics Inc.
95/56/EC: 1995*, annex VI ECE Reg 97*.
27th July 2005.
6th October to 23rd November 2005.
28th December 2005.
One.
The sample tested was found to
comply with the standards
This report is issued by the Company subject to its General Conditions of
Service available upon request and accessible at www.sgs.com. Attention is
drawn to the limitations of liability, indemnification, jurisdictional, representative
restrictions of test samples and sample retention policies defined therein.
This report refers only to the sample submitted for test.
This report shall not be reproduced except in full without the written
approval of SGS UK Ltd.
Tests marked:”*” are not covered by our UKAS accreditation.
Test Engineer
Authorised Signatory
G. Thompson G. Hann
F. Huggins A. Reynard G. Hann
WS Auto 01 F04 Rev 3
28-Apr-06
Member of SGS Group (Société Générale de Surveillance)
pr
or
Unit 10, Bowburn South Industrial Estate, Bowburn, Durham DH6 5AD Tel +44 (0)191 377 2000 Fax +44 (0)191 377 2020
A
Registered in England No. 1193985 Rossmore Business Park, Ellesmere Port, Cheshire CH65 3EN
www.sgs.com
p
UK
SGS United Kingdom Ltd
ity
Page 1 of 14
oval Au
th
TEST REPORT
Page 2 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
CONTENTS
Page Number
1. Client Information ...........................................................................................................................3
2. Equipment Under Test (EUT) .........................................................................................................3
2.1
Identification of EUT .......................................................................................................................................................4
3. Test Specification, Methods and Procedures ..............................................................................5
3.1 )
Purpose of Test ........................................................................................................................................................4
4. Deviations or Exclusions from the Test Specifications..............................................................4
5. Operation of the EUT During Testing ...........................................................................................4
5.1 Configuration and Peripherals........................................................................................................................................4
5.2 Operating Mode and Environmental Conditions .............................................................................................................4
A
pp
or
UK
WS Auto 01 F04 Rev 3
28-Apr-06
ity
6. Test Results.....................................................................................................................................8
roval Aut
h
TEST REPORT
Page 3 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
1. Client Information
Company Name:
Directed Electronics Inc.
Address:
Unit C, Longmead Business Centre,
Blenheim Road,
Epsom,
KT19 9QQ
Contact Name:
Mr. Shaun Findley
Telephone:
01372 847147
Facsimile:
01372 847149
2. Equipment Under Test (EUT)
Model Number:
VIPER 330
Unique Identifier:
PO 402427000124
Description of EUT:
Vehicle security system – Alarm, with the
following sensors: Ignition, Door, Boot, bonnet
and shock. Setting and un-setting via remote
control. With a back up siren module.
Supply Voltage:
12 volts DC.
Accessories Supplied:
None
UK
WS Auto 01 F04 Rev 3
28-Apr-06
A
pp
ity
Identification of EUT
or
2.1
roval Aut
h
TEST REPORT
Page 4 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
3. Purpose of Tests
To perform the relevant tests and assess the product for compliance with the above specification.
4. Deviations or Exclusions from the Test Specifications
There were no deviations from the test specifications.
5. Operation of the EUT During Testing
5.1
Configuration and Peripherals
Peripheral or support equipment was required for the tests.
5.2 Operating Mode and Environmental Conditions
A
pp
or
UK
WS Auto 01 F04 Rev 3
28-Apr-06
ity
The operating modes and environmental conditions used for each individual test are
described in the test results section of this report.
roval Aut
h
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
TEST REPORT
Page 5 of 14
Methods and Procedures.
The following tests are called up by the test specification:-
Description
Applicable
95/56/EC
1995
Annex V. Immobilizers.
N/A.
95/56/EC
1995
Annex VI. Alarms Systems.
Yes
95/56/EC
1995
Appendix 4. Audible Alarm Devices.
Yes
UK
WS Auto 01 F04 Rev 3
28-Apr-06
A
pp
ity
Date
or
Standard
roval Aut
h
TEST REPORT
Page 6 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
Deviations or Exclusions from the Test Specifications
A
pp
or
UK
WS Auto 01 F04 Rev 3
28-Apr-06
ity
Measurements were performed in accordance with the requirements of
the above specification.
roval Aut
h
TEST REPORT
Page 7 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
Operation of E.U.T. During Testing
Operating Environment
Power Supply:
Volts
13.5 DC
Environmental conditions:Temperature:
o
18.5
Relative Humidity:
%
58
Barometric Pressure:
mbar
996
C
Configuration & Peripherals
A
pp
or
UK
WS Auto 01 F04 Rev 3
28-Apr-06
ity
Peripherals were attached to the EUT during testing.
LED’s were connected to the input/outputs.
roval Aut
h
TEST REPORT
Page 8 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
Summary of Test Results.
Standard
Test
Result
95/56/EC
Annex V. Immobilizers.
N/A.
95/56/EC
Annex VI. Alarms Systems.
Complied.
95/56/EC
Appendix 4. Audible Alarm
Devices.
Complied.
Result
A
pp
or
UK
WS Auto 01 F04 Rev 3
28-Apr-06
ity
In the configuration tested the EUT complied with the specification.
roval Aut
h
TEST REPORT
Page 9 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
Test Results
General Comments
Details of the test methods used can be found in the SGS EMC
procedures manual.
Modifications Made to the EUT.
No modifications were made to the EUT.
ANNEX V. Immobilizer.
OPERATING MODE.
N/A.
Complied / Did not Comply / N/A.
Disablement - 4.1 to 4.1.2
Complied / Did not Comply / N/A.
Operation - 4.2 to 4.6.2
Complied / Did not Comply / N/A.
Instructions - 6.1 to 6.6
Complied / Did not Comply / N/A.
UK
WS Auto 01 F04 Rev 3
28-Apr-06
A
pp
or
General - 3.1 to 3.9
ity
Specifications.
roval Aut
h
TEST REPORT
Page 10 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
TEST CONDITIONS and OPERATING PARAMETERS.
Low Temperature (-40C) and Low Voltage (9volts).
COMPLIED / DID NOT COMPLY. / N/A.
5.2.2.2.
High Temperature (85C Passenger compartment) and High Voltage (15 volts.)
COMPLIED / DID NOT COMPLY. / N/A.
5.2.2.3.
High Temperature (125C Engine compartment) and High Voltage (15 volts.)
COMPLIED / DID NOT COMPLY. / N/A.
5.2.2.4.
Excess Voltage test (18 volts for 1 Hr.)
COMPLIED / DID NOT COMPLY. / N/A.
5.2.2.5.
Excess Voltage test (24 volts for 1 Min.)
COMPLIED / DID NOT COMPLY. / N/A.
5.2.3.
Test for water tightness and foreign body.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.4.
Resistance to humidity test.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.5.
Reversed polarity test (13 volts for 2 Min.).
COMPLIED / DID NOT COMPLY. / N/A.
5.2.6.
Test against Short Circuits (13v and earth/negative.)
COMPLIED / DID NOT COMPLY. / N/A.
5.2.7.
Current consumption in SET condition. (Max: 20mAmps.)
COMPLIED / DID NOT COMPLY. / N/A.
5.2.8.1.
Vibration test.
COMPLIED / DID NOT COMPLY / N/A.
5.2.8.2.1.
Type 1. Components mounted on the vehicle.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.8.2.2.
Type 2. Components mounted on the engine.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.12.
EMC tests, to 95/54/EC 1995, ISO 7637 Parts 1, 2 & 3.
ISO TR 10605.
COMPLIED / DID NOT COMPLY. / N/A.
UK
WS Auto 01 F04 Rev 3
28-Apr-06
A
pp
or
5.2.2.1.
ity
The following clauses can be tested on an Alarm-Immobilizer at the same time,
as an Immobilizer, or an Alarm System.
roval Aut
h
TEST REPORT
Page 11 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
ANNEX VI. Alarms.
OPERATING MODE.
1. The EUT was tested in set and un-set modes.
Specifications.
General - 3.1 to 3.10
Complied / Did not Comply
Protection - 4.1 to 4.1.2.2
Complied / Did not Comply
Alarm - 4.2 to 4.11.2
Complied / Did not Comply
Instructions - 6.1 to 6.7
Complied / Did not Comply
TEST CONDITIONS and OPERATING PARAMETERS.
5.2.9.
Durability test. Triggering of the alarm 300 complete cycles: with a rest time for the
audible device of 5 min; between each trigger/cycle.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.10.1.
External key Switch. Set and unset 2500 times in each direction,
followed by a salt spray corrosion test of 96 hours to IEC 68-2-11
-1981.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.11.
Protection of passenger compartment. A vertical panel of 0.2 by 0.15 M. is inserted for
0.3M. Through an open front window: into the passenger compartment at a speed of
0.4 M/sec. at an angel of 45˚. The alarm shall activate.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.13.
False Alarm in the event of an impact on the vehicle. An impact to the bodywork, or
glazing of the vehicle: of 4.5 Joules by a hemispherical body 165mm diameter and of
70 +/- 10 Shore A. shall not cause an alarm condition.
COMPLIED / DID NOT COMPLY. / N/A.
5.2.14.
False alarm in the event of a voltage reduction. With the alarm system set, slowly
reduce the voltage from 12 volts to 3 volts at a rate of 0.5 volt per hour. There shall be
no false alarms.
COMPLIED / DID NOT COMPLY. / N/A.
A
pp
or
UK
WS Auto 01 F04 Rev 3
28-Apr-06
ity
The following clauses can be tested on an Alarm-Immobilizer at the same time,
as an Alarm System.
roval Aut
h
TEST REPORT
Page 12 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
Continued.
TEST CONDITIONS and OPERATING PARAMETERS.
The following clauses can be tested on an Alarm-Immobilizer at the same time.
as an Alarm System.
UK
WS Auto 01 F04 Rev 3
28-Apr-06
A
pp
ity
False alarm to the passenger compartment. Using the set-up: as for
clause 5.2.13. (Above), impact the vehicle 5 times at 0.5 second
intervals: there shall be no false alarms.
Also when a person is moving around the protected vehicle or
touching the windows/vehicle from the out side there shall be no
false alarms.
COMPLIED / DID NOT COMPLY. / N/A.
or
5.2.15.
roval Aut
h
TEST REPORT
Page 13 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
APPENDIX IV. Audible Alarm Devices.
OPERATING MODE.
1. The EUT was operating from 13 volts DC.
Specifications.
Measurement of: sound characteristics.
COMPLIED / DID NOT COMPLY. / N/A.
2.1.7.
Sound pressure level. Shall not exceed 118 dB(A).
COMPLIED / DID NOT COMPLY. / N/A.
2.1.7.1.
Between the frequencies 1800 to 3500 Hz the level shall be
greater or equal to 105 dB(A)
N.B. 100dB (A). If not the original equipment, audible sound device.
COMPLIED / DID NOT COMPLY. / N/A.
2.1.8.
The levels of 2.1.7 & 2.1.7.1 above shall also be meet with a
supply voltage varying between 95 to 115 % of the rated
supplied voltage.
COMPLIED / DID NOT COMPLY. / N/A.
2.1.9.
From the moment of activation to the minimum level recorded
for 2.1.7. above, shall not be more than 0.2 of a second.
COMPLIED / DID NOT COMPLY. / N/A.
3.1 to 3.5.
Endurance testing.
the audible warning device shall be activated 50,000 times on for
1 second off for 4 seconds. During the test, the 95 to 115 % test of clause 2.1.8.
shall be conducted, and on completion of the 50,000 cycles the level s of 2.1.7.
shall be checked.
COMPLIED / DID NOT COMPLY. / N/A.
UK
WS Auto 01 F04 Rev 3
28-Apr-06
A
pp
or
2.1 To 2.1.6.
ity
General –
roval Aut
h
TEST REPORT
Page 14 of 14
Issue Date: 28th December 2005.
SGS Serial Number: DUR43965/GH/1/05.
Blank Page
A
pp
or
UK
WS Auto 01 F04 Rev 3
28-Apr-06
ity
Last page of report
roval Aut
h