BENDIXKing | AV80R | AV8OR - Honeywell

AV8OR
™
HANDHELD PORTABLE MULTIFUNCTION DISPLAY
How to install and configuring your AV80R to a ZAON PCAS
XRX Via RS 232
ONE
Ensure both the AV8OR and the ZAON PCAS XRX are powered and running.
TWO
From the AV8OR MAIN MENU, touch the “Go Fly” soft key and then touch
“OK” soft key. Touch the “MAIN MENU” soft key, then touch the
“Settings”
soft key.
THREE
Touch the Device Setup option to highlight, and touch the “SELECT” soft
key to display the Device and Port Setup page.
FOUR
On the Device Setup page, the configuration steps are:
• Set the Traffic port to “Serial”.
This is for AV8OR Handheld owners looking to configure their
ZAON PCAS XRX with the AV8OR Handheld.
• Set the Traffic Type to “ZAON
Traffic”. When finished, the Device
Setup should look like the screen:
WHAT YOU’LL NEED
• AV80R Handheld
• AV80R RS 232 Cable Part Number: 005-03702-0017 (cable
sold separately must be purchased through your dealer)
• ZAON PCAS XRX (Purchase separately through ZAON
http://www.zaon.aero/component/
option,com_frontpage/Itemid,1/)
AV8OR: Install and configuring your AV80R to a ZAON PCAS XRX Via RS 232
1
AV8OR
™
HANDHELD PORTABLE MULTIFUNCTION DISPLAY
FIVE
ELEVEN
Once the setting has been set, touch “Save & Exit”. If your setting for Traffic
doesn’t match, please revert back to the first bullet in step 4.
From the AV8OR MAIN MENU, touch the “Go Fly” soft key and then touch
“Settings”
For steps 6-10, all setting changes are done through ZAON PCAS
TWELVE
SIX
Using the XRX AIRCRAFT menu, set the aircraft type as appropriate for your
aircraft as described in the ZAON users Manual.
Touch the “Status Page” soft key and
double tap the “Traffic Status”. Verify you
have green check marks as shown for
Receiving Data and Receiving Valid Data:
SEVEN
Using the XRX RANGE menu, set the horizontal detection range to 6 nm radius.
EIGHT
Using the XRX ALTITUDE menu, set the altitude limitation to 2500 ft.
NINE
Using the XRX COM menu, set the third party communications to PROFILE 1.
Verify the XRX configuration switches are set as described in the XRX Users
Guide for third-party output.
TEN
Press “Mute” to return to the traffic screen. This screen will show “PROFILE 1”.
AV8OR: Install and configuring your AV80R to a ZAON PCAS XRX Via RS 232
2
Bendix/King by Honeywell is a global
provider of avionics, communications and
flight controls for the general aviation market.
Bendix/King by Honeywell 23500 W. 105th Street, Olathe, KS 66061-1950
Tel 913.712.2613 Fax 913.712.5697 Toll-Free in U.S. 877.712.2386 Web bendixking.com
A60-1115-002-000 © 2009 Bendix/King
Download PDF