LabMaster 9Zi-Aシリーズカタログ(英文)

LabMaster 9Zi-Aシリーズカタログ(英文)
LabMaster 9 Zi-A Series
(13 GHz – 45 GHz)
High Bandwidth Modular Oscilloscope Systems
Beyond the Limits
The Ultimate in Performance —
High Bandwidth,
High Channel Count,
High Sample Rate
9
LabMaster 9 Zi-A modular oscilloscope systems
completely re-define oscilloscope performance
and capabilities.
LabMaster 9 Zi-A provides more of everything, and its
modular design provides the simplest upgrade path in
bandwidth and channel count. ChannelSync™ ensures
precise synchronization of all channels in all acquisition
modules using a single-distributed 10 GHz clock and a
single trigger circuit. The result is the highest timebase
accuracy and an ultra-low 250 fs jitter between all channels, identical to that provided with a single, standard
oscilloscope package.
LabMaster 9 Zi-A is available with bandwidths up to
45 GHz, sample rates up to 120 GS/s and up to 80 input
channels. Upgrade flexibility is designed in—start with
a minimum configuration and add channels over time by
simply adding additional acquisition modules, upgrade
bandwidth on existing modules, or mix and match
bandwidths in one system. A server-class CPU packs
additional processing power for the immense amounts of
data made possible by LabMaster 9 Zi-A.
3
6
LabMaster enables the leading-edge technologies
that provide enhanced high speed data transfer
and communication—such as 28 – 32 Gb/s SERDES,
multi-lane serial data (40/100 GbE, PCIe Gen3), DDR, and
optical coherent modulation communications. It’s also
ideal for defense and aerospace applications where high
channel count and high bandwidth are both required.
A LabMaster 45 GHz System that provides two
channels at 45 GHz, four channels at 30 GHz,
and eight channels at 20 GHz. Two 45 GHz or
2
1. High performance — 45 GHz bandwidth
(8 ps risetime20 – 80%), 120 GS/s sample rate, up to
80 channels, up to 768 Mpts of analysis memory
1
11
12
13
2. Modular — start with four channels and grow your
5
system over time. Spread out your investment as
funds permit
14
3. Wide bandwidth upgrade range (13 – 45 GHz) provides
investment protection
4. ChannelSync architecture utilizes a 10 GHz distributed
clock for precise alignment of all acquisition systems
5. Single trigger circuit for all modules eliminates additive
8
10
4
7
trigger jitter that occurs with 10 MHz clocking and trigger
synchronization of multiple conventional oscilloscopes
6. Simple — connect and acquire — Teledyne LeCroy has
done the hard work for you
7. 325 MB/s data transfer rate from the LabMaster
2
to a separate PC with Teledyne LeCroy Serial Interface
Bus (LSIB) option
8. Server-class multi-core processor combines with
X-Stream II streaming architecture for fast acquisition
and analysis — 33.6 GHz effective CPU clock rate and
24 GB of RAM standard (expandable to 192 GB)
9. Utilize the built-in 15.3" widescreen (16 x 9) high
resolution WXGA color touch screen display — or
connect your own with up to WQXGA 2560 x 1600
pixel resolution
10. Low Jitter Measurement Floor and highly
stable timebase over long acquisitions
11. Deepest standard toolbox with more measurements,
more math, more power
12. SDAIII “CompleteLinQ” options provide four
simultaneous eye diagrams and jitter calculations for
multi-lane or single-lane, multiple location analysis, noise
measurements and crosstalk analysis
13. Eye Doctor™ II and Virtual Probe Signal Integrity
Toolsets provide real-time de-embedding, emulation,
and equalization on serial data channels
four 30 GHz inputs provide direct cabled inputs for
high-speed differential signals. 20 GHz maximum
channel capability is 80 channels - twenty times what
is provided by conventional oscilloscopes.
14. Up to 14.1 Gb/s Serial Trigger available - 80-bit NRZ and
8b/10b Symbol triggering (with 9xxMZi-A models only)
3
INNOVATIVE OSCILLOSCOPE SOLUTIONS
The pace of innovation is
accelerating. Oscilloscopes
with more channels, and
more bandwidth on many
channels, are needed.
LabMaster 9 Zi-A is the first
fundamentally different
oscilloscope design in 30 years.
LabMaster 9 Zi-A builds on
the acquisition and analysis
excellence of the Teledyne LeCroy
WaveMaster 8 Zi-A to create an
entirely new class of oscilloscopes
that is modular, inherently
upgradeable, and infinitely
flexible while retaining all of the
performance excellence which
Teledyne LeCroy is known for.
LabMaster 9 Zi-A systems can be
configured for massive numbers of
channels at 20 GHz or with twenty
channels at 45 GHz or something
in between. Acquisition modules
with different bandwidths and
channel counts can even be mixed
and matched.
Performance is not sacrificed
with LabMaster 9 Zi-A. Proven
SiGe components ensure
high performance with Digital
Bandwidth Interleaving (DBI)
providing upgrade paths and
bandwidth performance not
otherwise available. ChannelSync
ensures precise synchronization of
all acquisition modules. The result
is the best possible oscilloscope in
the world, in every possible way.
4
“Master” Control Module
The MCM-Zi Master Control Module provides a built-in display, control panel,
CPU, and the ChannelSync 10 GHz distributed clock that is the heartbeat of
the system and which provides precise synchronization between all
oscilloscope channels. High speed multi-lane PCIe connections are made
to the “Slave” Acquisition Modules for control and data transfer.
A LabMaster 9 Zi-A system
with 16ch @ 20 GHz and
8ch @ 30 GHz system in an
OC910 cart. A 16 channel
system as shown is ideal for
multi-lane serial data
characterization or coherent
optical MIMO and few-mode
fiber analysis.
System
The entire system simply
and quickly connects
together to create a
functional, single
oscilloscope package,
but without the normal
input channel or
bandwidth limitations—
operation is the same
as a conventional
oscilloscope. All
waveforms are viewable
on the built-in 15.3"
display or on a variety
of optional or user-supplied
displays (up to 2560 x 1600 resolution).
System configuration may be done with one of two “Master” modules. The
entire system design speaks to a level of sophistication and integration not seen
before in laboratory equipment.
“Master”
Acquisition Module
The 9xxMZi-A Master Acquisition
Module is similar to the “Master”
Control Module, except that it
contains an acquisition module and
the CPU is a separate module. High
speed multi-lane PCIe connections
are made to the “Slave” Acquisition
Modules for control, and to the CPU
for data transfer. Note that although
this module alone looks like a
conventional oscilloscope, it lacks an
internal Central Processing Unit (CPU)
– all data is sent to the server-class
CPU for processing.
The 9xxSZi-A Acquisition Modules
are tightly integrated to the Master
with the ChannelSync 10 GHz
distributed clock and a multi-lane PCI
Express connection— From 1 to 20
Acquisition Modules can be configured
with a single Master. All acquired data
is sent to the server-class CPU for
processing. Lighted channel indicators
intelligently and dynamically indicate the input channel assignments,
depending on the operator setup.
MCM-Zi MASTER CONTROL MODULE
PCI Express
Data Transfer
& Control
Central Processing
Unit (CPU)
Additional
Acquisition
Modules
Teledyne LeCroy has spared no
expense by providing a server-class
CPU using Intel Xeon™ X5660
processors (2.8 GHz per core, six cores
per processor, and two processors per
CPU = 33.6 GHz total effective clock
speed). 24 GB of RAM is standard (up
to 192 GB optionally available).
Coupled with Teledyne LeCroy’s
proprietary X-Stream II streaming
architecture, the CPU muscles its
way through the immense amounts
of acquisition data made possible
by LabMaster 9 Zi-A. (Supplied as a
separate module with the 9xxMZi-A
and included inside the MCM-Zi).
9xxMZi-A MASTER ACQUISITION MODULE
ChannelSync
10 GHz
Clock Out
PCI Express
Data Transfer
& Control
ChannelSync
10 GHz
Clock Out
LabMaster MCMZi-A Master Control Module
ACQUISITION MODULE
ACQUISITION MODULE
2B 3B
6B 7B
ACQUISITION MODULE
ACQUISITION MODULE
6B 7B
10B 11B
ACQUISITION MODULE
ACQUISITION MODULE
10B 11B
ACQUISITION MODULE
13 14
15
16
ACQUISITION MODULE
13
14
15 16
ACQUISITION MODULE
17 18
19 20
CPU
17
18
19 20
The system images shown on pages 4 and 6 are configured with the Master Acquisition Module (as shown on the left).
5
PERFORMANCE EXCELLENCE & Investment Protection
The LabMaster 9 Zi-A platform provides a modular, building block approach to minimizing initial investment while
at the same time providing future flexibility. The minimum configuration is four channels at 13 GHz with maximum
upgrade to 20, 40, or 80 channels at 45, 30, or 20 GHz respectively with up to 768 Mpts/ch of analysis memory.
20 GHz, 4 Channel Core
Acquisition Module
Digital Bandwidth
Interleave for Upgradeability
A SiGe acquisition system — the
same one utilized in the WaveMaster
8 Zi-A oscilloscope product line — is
operated comfortably within its 20+
GHz bandwidth rating and forms the
basic acquisition building block of the
LabMaster acquisition modules. Signal
fidelity is exceptional, and modules are
available at attractive price points down
to 13 GHz bandwidth.
As memory and sample rate can
be interleaved, so can bandwidth.
Using high performance technologies
and digital signal processing (DSP),
Teledyne LeCroy provides additional
bandwidth on one or two channels
with 6th generation
Digital Bandwidth Interleaving (DBI).
This approach can add 2 channels at
30 GHz and 1 channel at 45 GHz to
the 20 GHz acquisition building block.
Signal fidelity nearly equals that of
sampling oscilloscopes, but with none
of the acquisition limitations.
4 Channels at 13 GHz
Upgrade to
8 Channels at 20 GHz
Minimum intial purchase is a
LabMaster MCM-Zi Master Control
Module and a 913SZi-A Acquisition
Module. This provides four
channels at 13 GHz.
6
Then upgrade the Acquisition
Module to a 20 GHz LabMaster
920SZi-A, and add another
LabMaster 920SZi-A 20 GHz
Acquisition Module.
Maximum Flexibility
Start with one Master Control
Module and one Acquisition. Upgrade
Acquisition Modules to include more
memory or more bandwidth. Add
additional acquisition modules at any
time without returning equipment to
the factory for modification or
re-calibration. Spread out your capital
investment over a longer period of
time, and make only the investments
you need when you need them.
Upgrade to
8 Channels at 20 GHz
2 Channels at 30 or 36 GHz
Add More Memory
Then upgrade the Acquisition
Module to a 30 GHz model.
Increase acquisition memory to
256 Mpt/Ch. Add an additional
24 GB of RAM to the CPU.
Beyond 20 Input Channels
Easily expand beyond 20 channels (5 acquisition modules) with
the LabMaster CMH-20Zi ChannelSync Mainframe Hub. This
permits capability for up to 80 channels at 20 GHz with the
same precise ChannelSync performance as described for the
basic system.
The ChannelSync Mainframe Hub redistributes the 10GHz clock
and the Master module’s PCIe synchronization signals. It outputs
up to 20 identical sets of signals that are connected to up to 20
acquisition modules to provide up to 80 channels at 20 GHz,
up to 40 channels at 30 GHz, or up to 20 channels at 45 GHz.
Precision between all acquisition modules is maintained
identically to the basic system.
The ChannelSync Mainframe Hub is populated with one “card”
for each acquisition module that is to be connected. These cards
can be purchased at any time to minimize the upfront cost.
ChannelSync
Upgrade to
16 Channels at 20 GHz
8 channels at 30 GHz
4 Channels at 45 GHz
Upgrade all Acquisition Modules to
45 GHz maximum bandwidth with
768 Mpts/Ch acquisition memory.
Add two additional 45 GHz Acquisition
Modules with maximum memory.
(Note: maximum capability supported by
MCM-Zi alone is five acquisition modules).
ChannelSync precisely
synchronizes all acquisition modules. This
screen image shows
four differential signals
input to four different
acquisition modules and
all signals are perfectly
synchronized.
7
Complete Application Coverage
occurring to support
faster electrical
datacom and telecom
transfer rates.
Sampling
oscilloscopes lack
the data collection
and analysis capability necessary
to understand
the root cause of
deterministic jitter
issues, such as
that provided by
Teledyne LeCroy’s
SDA III Serial Data
Analysis software.
10 to 28+ Gb/s SERDES
Development
Development and characterization of
high-speed SERDES is actively
For 28 Gb/s
SERDES
development,
LabMaster 9 Zi-A can
be cost-effectively
configured for two
channels at 30/36 GHz
and 8 channels at
20 GHz, providing a
good balance between
high speed characterization and multilane development. LabMaster 10 Zi
can provide even higher bandwidth
(up to 65 GHz).
Optical Transmission Using
Coherent Modulation
Cloud computing demands are driving
rapid developments in buildouts of 28
GBaud (112 Gb/s) DP-QPSK coherent
modulation systems while at the
same time research is progressing on
even faster speeds. LabMaster 9 Zi-A
systems are competitive solutions
with attractive upgrade paths to more
channels and more bandwidth.
Parallel optical systems, such as
frequency-parallel coherent optical
super-channels or spatially-parallel
coherent optical multiple-inputmultiple-output (MIMO) systems,
have been gaining attention due to
their ability to scale fiber capacities
and to obtain higher transmission
rates with lower speed components.
LabMaster 9 Zi-A systems based on
multiple 20 GHz acquisition modules
are an effective means to achieve
12 (or more) input channels for
Coherent MIMO and few-mode fiber
transmission testing and validation.
Defense and Aerospace Applications
Both high channel counts and high
bandwidth are often required in defense
and aerospace applications. LabMaster
9 Zi-A systems can be configured in a
variety of channel counts and bandwidth
to meet these needs. Teledyne LeCroy’s
Serial Interface Bus (LSIB) allows data
transfer rates from the oscilloscope
8
to a separate stand-alone PC at speeds
up to 325 MB/s and record lengths
up to 768 Mpts/ch. ChannelSync in
LabMaster 9 Zi-A eliminates time
spent integrating multiple conventional
oscilloscopes into single multioscilloscope systems, and provides
precise synchronization between all
acquisition modules. Customization
capabilities permit automated
control or user-created math functions
and measurement parameters to
run in the oscilloscope, enabling the
simple deployment of proprietary
algorithms from within the oscilloscope
user interface.
Multi-Lane Serial Data
As serial data rates have
increased, serial data has also
become “parallel” with multiple
lanes utilized to achieve higher
effective data transfer rates.
40/100 GbE with up to 10 lanes at
10 Gb/s each, 100 GbE with up to
4 lanes at 28 Gb/s each, and
PCI Express with up to 16 lanes at
8 Gb/s each, all using differential
signaling, are obvious examples.
LabMaster 9 Zi-A can be
configured in up to 80 channels at
20 GHz, or up to 40 channels at
30 GHz. This can be especially
helpful for crosstalk analysis
or lane skew measurements.
For instance, by sending active
data over all lanes and utilizing
SDAIII-CompleteLinQ Serial
Data Analysis to view up to four
simultaneous eye diagrams and
jitter measurements, complex
lane interactions and “victim/
aggressor” behavior can be
observed. Bad behaviors can be
characterized and debugged with
Teledyne LeCroy’s Crosstalk,
EyeDrII and Virtual Probe tools
provided in SDAIII-CompleteLinQ.
Lane skew measurements are
simple when all of the lanes
can be viewed simultaneously.
Additionally, two separate
oscilloscope channels (with math
subtraction) for one differential
signal provides better signal
fidelity and jitter measurement
accuracy compared to using
additional differential probes or
amplifiers with similar or lower
cost, and circuit connection is
greatly simplified.
9
Enabling High-Speed SERDES Developments
10
The pace of SERDES development is accelerating, driven by increasing
network traffic, the desire for reduction in lane count to simplify design and
development, and the need to maintain the same (or higher) aggregate data
transfer speeds. 10 –12 Gb/s speeds previously developed are now commonly
deployed with up to 10 lanes in 100 GbE, and demands are now focusing on
25 – 32 Gb/s speeds.
LabMaster 9 Zi-A is uniquely suited
to the demands of the high-speed
SERDES market. It’s ability to
provide up to 45 GHz of real-time
bandwidth with two or more input
channels is beneficial for accurate
characterization of 28 – 32 Gb/s signals
that have significant power spectral
density at > 32 GHz. Oscilloscope
risetime20 – 80% is an impressive
8 ps, necessary speed when the unit
interval (UI) is a mere 36 ps wide
(or less). The 768 Mpts/Ch acquisition
memory provides the ability to
capture very long patterns, permitting
deterministic jitter (Dj) decomposition
on long patterns — something not
possible in a sampling oscilloscope.
Two input channels provides the
ability to input a differential signal
pair into the oscilloscope, eliminating
the bandwidth, noise, and accuracy
constraints inherent in a separate,
external differential amplifier.
Multiple Configurations
Provide Flexibility
In addition to 2 channels at 45 GHz,
a LabMaster system will also provide
4 channels at 30 GHz or 8 channels
at 20 GHz for testing and debugging
of multiple lanes at lower bandwidth.
This can be especially useful for
crosstalk analysis or lane skew
testing when multiple lanes are
deployed. Thus, a 45 GHz LabMaster
can deployed in a variety of ways
and serve many important application
needs in the same lab.
Superior Serial Data Analysis
and Debug Tools
Teledyne LeCroy’s SDAIII-CompleteLinQ
Serial Data Analysis products provide
unique capability to simultaneously
calculate and display four eye
diagrams and jitter measurements
from four separate lanes or one lane
probed or modeled in four different
locations. Measure vertical noise and
perform crosstalk analysis, and use
8 and 12-port S-parameters and
built-in EyeDrII and VirtualProbe tools
to de-embed Crosstalk.
A variety of serial decode annotations
are available for common encoding
schemes, as well as serial protocols.
Teledyne LeCroy’s combination of
serial decoders and ProtoSync™
protocol analysis views permits link
layer debugging on initial SERDES
transmissions before protocol analyzer
hardware is typically available.
How Much Bandwidth
is Needed?
Limited oscilloscope bandwidth
slows signal rise times and
attenuates important high frequency
content necessary to properly
characterize high-speed SERDES.
The use of 45 GHz of oscilloscope
bandwidth allows capture of
important 3rd harmonic information,
increasing the capability to
accurately measure jitter
and otherwise accurately
characterize the 28 Gb/s
component.
The use of a sampling
oscilloscope is no solution—
sampling oscilloscopes can only
be used with repetitive signals,
and provide no ability to postprocess the data to decompose
deterministic jitter and understand
root cause.
11
Multi-Lane Serial Data Testing
LabMaster 9 Zi-A systems provide unique capability to capture and analyze massive numbers of channels at very high
bandwidth — up to 80 channels at 20 GHz or 40 channels at 30 GHz — with precise synchronization amongst all channels using Teledyne LeCroy’s ChannelSync. This is an ideal solution for serial data standards with many lanes of data
at high bit rates, such as 40/100 GbE and PCI Express. Additionally, serial decode, protocol analysis, eye diagram, jitter
measurement, and crosstalk analysis tools can be applied for single or multi-lane analysis and system validation.
Up to 80 Channels at up
to 20 GHz
LabMaster 9 Zi-A may be configured
with 4 to 80 channels and from 13 to
20 GHz of bandwidth. Jitter between
all 20 GHz channels is exceptionally
low. Signal fidelity is pristine
with exceptional rise time, step
response, and total and random jitter
measurement floor. High effective
number of bits (ENOB) over the
complete operating frequency range,
especially in the crucial mid-band,
ensures the most noise-free display
of signals. For higher speed serial data
signals, 2 to 10 channels at 30 GHz
may be desired. In addition to the
higher bandwidth, these systems also
provide double the input channels
at 20 GHz of bandwith.
New Possibilities
Previously, oscilloscopes were
limited to 4 channels, and could
only be extended beyond that with
significant limitations and user
effort. LabMaster 9 Zi-A simplifies
everything — it is easy and automatic
to configure many channels. Just
connect the acquisition modules
together, perform a quick and simple
deskew procedure, and view all the
acquisition data on a single display.
In addition, the modular Acquisition
Modules minimize incremental
channel cost, making it more
cost-effective to purchase more
12
ChannelSync
Provides Precise
Synchronization
Between All
Acquisition
Modules
ChannelSync in LabMaster 9 Zi-A
emulates the architecture of a
single oscilloscope package, even
though as many as 80 different
channels are available for use.
A single 10 GHz distributed clock
signal is generated and used in the
“Master” and also distributed to all
Acquisition Modules. The 10 GHz
clock frequency — 1000 times faster
than the 10 MHz reference clocks
commonly used to synchronize
lab equipment — ensures precise
synchronization and high timebase
accuracy between all acquisition
modules. Additionally, a single
trigger circuit for all modules
eliminates additive trigger jitter that
occurs with 10 MHz clocking and
trigger synchronization of multiple
conventional oscilloscopes.
Acquisition Modules are
automatically identified to the
Master Control Module, and a
simple and quick ChannelSync
calibration corrects for any static
acquisition skew between all
acquisition modules. The result is
up to eighty oscilloscope channels
all operating as a single oscilloscope
package.
oscilloscope channels instead of
expensive probes. Furthermore, by
cabling signals into the scope instead
of using a differential probe or
amplifier, noise is decreased by 3 dB
or more, with higher user confidence
in the overall signal fidelity of the
complete measurement system.
Modules to a higher bandwidth, as
needs change. Acquisition Modules can
be mixed together in any combination of
bandwidth, so it is possible to configure
a system with two channels at 30 or
45 GHz for single lane serial data
analysis, and eight (or more) channels
for multi-lane testing of four (or more)
differential signals using cabled inputs.
similar or lower cost. Once three or
more differential lanes are captured,
SDAIII-CompleteLinQ Serial Data
Analysis software can be used to
measure jitter and eye diagrams
on up to four lanes, and perform
“victim” and “aggressor” crosstalk
analysis through direct vertical
noise measurements and crosstalk
analysis tools.
Flexibility, Upgradeability,
Investment Protection
LabMaster 9 Zi-A makes it easy
to spread out your capital costs
over time and purchase only what
you need when you need it. Start
with the minimal channel count
and bandwidth configuration and
add more Acquisition Modules,
or upgrade existing Acquisition
Unique Multi-Lane
CompleteLinQ Test Capability
Only a LabMaster system provides
the capability to simultaneously view
four or more differential lanes of serial
data traffic with direct cabled inputs,
thus increasing the accuracy and signal
fidelity compared to using differential
probes or external amplifiers, with
Simple Multi-Lane System
Validation
Multi-lane serial data systems have
specifications for allowable laneto-lane skew. By viewing all lanes
simultaneously, and applying serial
decoders as necessary, validaton of
skew tolerance is a fast process.
13
28+ GBaud OPTICAL Coherent Modulation Analysis
LabMaster 9 Zi-A combines the world’s fastest real-time bandwidth and four input channels with
pristine signal fidelity to meet the advanced research and development requirements for optical
coherent modulation analysis on long-haul telecommunication systems.
Four Channels at 45 GHz
A LabMaster 9 Zi-A four channel
45 GHz system is the ultimate in
bandwidth and sample rate for the
highest speed characterization of
DP-QPSK or 16-QAM optical coherent
modulation systems. These systems
provide 120 GS/s (2.67x oversampling)
on all four channels for
accurate capture of in-phase
and quadrature-phase
modulated signals in two
polarizations. The
45 GHz acquisition
system has low noise
and high effective
number of bits
14
(approximately 5.0 ENOB at 45 GHz) for
minimal receiver sensitivity penalties at
high analog bandwidths. ChannelSync
ensures high phase stability between
all tributaries - at least 2.5 times
better than competitive solutions. This
ensures the best possible accuracy in
constellation diagram analysis.
45 GHz rise time20 – 80% is an
astonishing 8ps — clearly beneficial
when testing 40 to 80 GBaud DP-QPSK
or faster 16-QAM symbol rates utilizing
baseband signals with unit intervals (UI)
as small as 25 ps.
Upgradeable
and Expandable
LabMaster 9 Zi-A may also be
configured as a four channel 30 GHz
system and two channel 45 GHz
system. While providing lower
bandwidth on all four channels, it does
provide two channels at 45 GHz for
single-polarization characterization.
This configuration can later be
upgraded to four channels at 45 GHz
with the addition of two additional
Slave Acquisition Modules, which
can be added at any time without
returning the other components to
Teledyne LeCroy for calibration or
integration. It also provides for the
ability to grow the system over time
as needs change. This can be the
ideal system for 56 GBaud DP-QPSK
research and testing, allowing
upgrade and expansion as symbol
rates go higher.
through the use of the XDEV software
capability. This provides the ability to
integrate a MATLAB, C/C++, JScript
(JAVA) or Visual Basic script into the
oscilloscope’s processing stream. This
capability is ideal for emulating the
receiver equalization since it allows
proprietary user-generated algorithms
to be created and run directly
within the oscilloscope operating
environment. The result may then
be displayed on the oscilloscope
in real-time, and computed results
may be exported like any channel.
The server-class CPU can also be
equipped with Teledyne LeCroy’s
Serial Interface Bus (LSIB) to allow
acquired data to be transferred to
another computer at speeds up to 325
MB/s. The combination of acquisition,
customization, processing, and data
export capabilities in LabMaster 9
Zi-A allow it to be used as the single
lab data acquisition and processing
tool, or leveraged solely as a data
acquisition device with fast offload
of acquired data to another CPU for
further analysis.
Complete Customization and
Fast Data Transfer
All configurations of LabMaster 9 Zi-A
support the needs of researchers with
complete customization capability
28 GBaud Optical
Coherent Modulation
Analysis Using
WaveMaster 8 Zi-A
Teledyne LeCroy’s WaveMaster 820Zi-A
four channel 20 GHz ­oscilloscope is an economical
alternative to a LabMaster 9 Zi-A system for characterizing
28 GBaud dual-polarization QPSK or 16-QAM coherent modulated
signals. This oscilloscope uses the same acquisition system as the
LabMaster 9 Zi-A, and can be upgraded in bandwidth to two channels
at 30 GHz for more accurate characterization of a single polarization.
Consult Teledyne LeCroy for more details.
15
SDAIII-CompleteLinQ Serial Data Analysis Products
The Teledyne LeCroy SDAIII-CompleteLinQ
Serial Data Analysis products contain
multi-lane eye and jitter analysis,
LaneScape™ comparison modes, vertical
noise measurements, and crosstalk analysis
tools. These capabilities provide the
deepest insight into the behavior of
multi- or single-lane serial data systems.
SDAIII Core Toolset
Teledyne LeCroy provides the most complete toolset in
the industry for jitter measurements and eye diagram/
jitter analysis. Rj and Dj are separated and Dj is
decomposed using one of three dual-Dirac algorithms.
Eye diagrams containing all acquired unit intervals are
rendered 10-100x faster than competitive systems.
Eye diagram analysis tools, such as the extrapolated
IsoBER plot, aid
insight. Multiple
additional tools,
such as Tracks,
Histograms,
and Spectrum
waveforms,
Rj+BUj Analysis
enhance the
understanding
of jitter causes.
Sophisticated pattern
analysis tools, such as Intersymbol
Interference (ISI) measurements and plots,
provide deep insight into Data Dependent
Jitter (DDj) behavior.
Eye with IsoBER
Tj
Total Jitter
DDj Analysis with ISI Plot
Rj
Dj
Random Jitter
Deterministic Jitter
BUj
Bounded Uncorrelated Jitter
DDj
Data Dependent Jitter
Pj
OBUj
DCD
ISI
Periodic Jitter
Other Bounded
Uncorrelated Jitter
Duty Cycle
Distortion
Intersymbol
Interference
Pj Analysis
Three Jitter Methodologies
16
Choose from three dual-Dirac models to separate jitter into total, random and deterministic
components (Tj, Rj, Dj). The Spectral Rj Direct method determines Rj directly from the jitter spectrum,
and is the most used algorithm. Spectral Rj+Dj CDF Fit follows the FibreChannel MJSQ model. In
situations where large amounts of crosstalk/BUj raise the spectral noise floor, the NQ-Scale method
will provide more accurate separation of Rj and Dj, and therefore more accurate Tj results.
Optional SDAIII Upgrades
Measure up to 4 Lanes
Simultaneously
“LinQ” products provide extensive multi-lane
analysis capabilities. Quickly understand
lane-to-lane differences in jitter measurements,
eye diagrams, and jitter analysis. Perform
aggressor on/off analysis, and see the results
from both scenarios simultaneously. Save the
analysis of a particular scenario to the Reference
Lane, and configure a LaneScape™ Comparison
mode to compare the Reference to either one,
two or all lanes. Each “lane” can be a different
serial data lane, or a different analysis of data
from a single serial data lane - ideal for comparing
different equalization schemes (using Eye Doctor II option)
or examining system behaviors at different locations in the
lane (using probes or the VirtualProbe option).
Vertical Noise and Crosstalk
The Crosstalk and CrossLinQ packages provide vertical
noise measurements and crosstalk analysis tools for
complete aggressor/victim analysis. Use one of three dualDirac models to measure and separate noise into total (Tn),
random (Rn) and deterministic (Dn) components, and further
decompose Dn into Intersymbol Interference Noise (ISIn)
and Periodic Noise (Pn). Only Teledyne LeCroy performs
this analysis on real-time oscilloscopes. Similar to jitter
analysis, noise can be viewed as a noise track, histogram
and spectrum, providing insight into the vertical noise
resulting from coupling to other active serial data lanes or
other interference sources. The Crosstalk Eye shows the
probabilistic extent of noise both inside and outside the eye,
quickly showing the impact of excessive noise that is not
possible to see in a traditional eye diagram.
CompleteLinQ Does it All
The CompleteLinQ user interface framework provides easy access to all
Learn More:
teledynelecroy.com /SDAIII
View our short introductory video:
http://lcry.us/YB0qyY
features described above, and also integrates EyeDoctorII and VirtualProbe
capabilities for Tx/Rx equalization and fixture/channel de-embedding/emulation.
Order SDAIII-CompleteLinQ to equip your oscilloscope with all of Teledyne
LeCroy’s Serial Data Analysis and Signal Integrity tools.
17
EyeDoctor™II and VirtualProbe Signal Integrity Tools
VirtualProbe shows you the signal
where the probe is not located:
TRANSMITTER
1
2
3
4
Fixture
Backplane
Connector
Trace
RECEIVER
1
Virtually probe the signal at the
transmitter with the fixture present, and then de-embed its
effects form the measurement.
View the signal between structures
to understand losses, ISI and
crosstalk caused by backplanes,
interconnects and connectors.
As signal speeds and data rates
continue to rise, signal integrity
effects such intersymbol interference
(ISI) and crosstalk become more
prevalent and challenging.
Use Teledyne LeCroy’s Advanced
Signal Integrity tools to transform
your measured signal to include the
effects of de-embedding, emulation
and equalization algorithms.
De-embed, Equalize and
Emulate with EyeDoctorII
Curious to know what your signal
would look like without fixture
effects? Do you need to understand
how ISI and crosstalk of a modeled
channel will affect your jitter margin?
Or are you seeking to determine
which equalization schemes will do
the best job of opening a closed eye?
The EyeDoctorII package includes
easy configuration of basic de-embed/
emulation scenarios, CTLE, DFE
and FFE equalizers, and transmitter
emphasis/de-emphasis.
18
See what the eye looks like at the
receiver - even if it is not in reach
of a differential probe.
2
3
4
Use EyeDoctor to open the eye
by modeling CTLE, FFE and DFE
equalizers used by your receiver.
Advanced De-embedding,
Emulation and Virtual
Probing
Use EyeDoctorII and
VirtualProbe with SDAIII
CompleteLinQ products
The VirtualProbe package expands
the de-embedding and emulation
capabilities of EyeDoctorII. Configure
a multi-block circuit using modeled
S-parameters or measured with a
Teledyne LeCroy SPARQ (or other
VNA), and VirtualProbe will build the
transfer function that returns the
signal as it would appear before or
after any block in the circuit. The
electrical behavior of a block to reflect
and transmit signals can be included,
added or removed in order to
de-embed or emulate fixtures or channels. Probe loading effects can also
be removed. When used in conjunction with the Crosstalk, CrossLinQ or
CompleteLinQ SDAIII options, crosstalk between lanes can be modeled
using 8 and 12-port S-parameters.
Use the Teledyne LeCroy SPARQ to
measure these S-parameters at a
When using EyeDoctorII and
VirtualProbe on oscilloscopes enabled
within the SDAIII-CompleteLinQ
products, configure de-embedding,
emulation and equalization from the
same simple flow-chart dialog as all
other serial data analysis features.
When enabled with the “LinQ” option
to enable 4 lanes, users can configure
EyeDoctorII and VirtualProbe configurations on each lane, facilitating rapid
comparisons of different de-embedding and equalization setups.
fraction of the price of a VNA.
Learn More
teledynelecroy.com/dl/1023
teledynelecroy.com/vid/M0T6WEC0JYQ
teledynelecroy.com/dl/1216
teledynelecroy.com/dl/1136
SPARQ SIGNAL INTEGRITY NETWORK ANALYZER
S-parameters, Quick
The SPARQ signal integrity
network analyzers connect
directly to the device under
test (DUT) and to PC-based
software through a single USB
connection for quick, multi-port
S-parameter measurements.
SPARQ is the ideal instrument
for characterizing multi-port
devices common in signal integrity
applications at a fraction of the
cost of traditional methods. It is
ideal for:
• Development of measurementbased simulation models
• Design validation
• Compliance testing
• High-performance TDR
• PCB testing
• Portable measurement
requirements
High-bandwidth, Multi-port
S-parameters for the Masses
S-parameter measurements are
most often produced by the vector
network analyzer (VNA), a difficult
instrument that is beyond many
budgets. SPARQ is very affordable and
simplifies measurements, making
S-parameters accessible to all.
PC-based, Small and Portable
Traditional instruments that produce
S-parameters are large and fundamentally stationary. The SPARQ, in
contrast, is small and weighs less than
20 lbs. It connects to any standard PC
through a USB 2.0 interface, allowing
SPARQ to run where computing
power is easily upgraded.
VNA measurements begin with
the unpleasant and complex task
of calibration. This involves multiple
connections that can produce
misleading results due to operator
error. The SPARQ provides calibrated
measurements with a single connection to the DUT and offers simple
setup choices. Start and complete
the entire measurement with a
single button press.
Internal Calibration
SPARQ takes a revolutionary approach
to calibration by building in calibration
standards. This enables measurements to be made without multiple
connection steps and removes the
need for additional electronic calibration (ECAL) modules. Calibration
proceeds quickly without user intervention, so one can calibrate often
without resorting to the use of
out-of-date saved calibrations.
Characterize Crosstalk with
8 and 12-port SPARQs
Don’t just model crosstalk - measure
it. With the 8 and 12 port SPARQs,
characterize interconnects with two
and three differential lanes in order to
obtain S-parameters needed for
simulations of aggressor/victim/
aggressor topologies.
19
Most complete Debug solution from 13 – 45 GHz
Complete System Debug
Understanding the relationships
between different signals is vital to
fast debug. Only LabMaster 9 Zi-A
combines the best of general
purpose oscilloscopes (low-speed
serial triggers and decoders, mixed
signal capability, high impedance
probing) to allow easy correlation
between low-speed (serial data
control words, power supply noise,
or parallel data transmissions) and
high-speed events.
Search and Scan to
Understand
Search a captured waveform for
hundreds of different measurement
parameters or other conditions using
WaveScan. Set complex conditions,
view search results on the waveform
and in a table, and quickly zoom and
jump to an entry. “Scan” for events that
can’t be triggered in hardware.
Capture 5 ms (100 Mpts) of low-speed and
high-speed waveforms. Decode low and high
speed serial data signals.Easily zoom, and
validate timing relationships between signals.
Freedom from
Probing Limitations
Serial Decode—A Whole
New Meaning to Insight
Over 19 different protocols are supported with
serial decoders (many with hardware protocol
triggers as well). Use ProtoSync with PCIe,
USB, SATA, SAS, and Fibre Channel to get a
dual-display view of both oscilloscopegenerated decode annotations and protocol
analyzer software views. Search on protocol
data in a table and export table data to an
Excel file.
Learn More
teledynelecroy.com/dl/3005
Get more insight with multiple
views of your serial data
transmissions.
A
A
B
B
I2C
A
B
More Trigger Capability Isolates
More Problems More Quickly
I2C
A
B
15 GHz Edge trigger, 6.5 or 14.1 Gb/s
SPI
2
B Cascade™ triggering, Measurement
stage
IC
A
UART
2
B
SPI
UART
UART
UART
Add Mixed Signal Oscilloscope (MSO)
UART
UART
LIN
UART
I2C the MS
A SPI operation
using
Series
SPI mixed
FlexRay
B
LIN
LIN
trigger, and TriggerScan™ are all standard
FlexRay
FlexRay
and allow you to isolate the problem quickly
and begin to focus on the cause. A full range
of protocol serial triggers
RS-232,
Audio­(I2S,
(I2C,
I2C
A
B
LJ, RJ, TDM), CAN,ALIN,
B
SPI
A
B
SPI, UART,
20
to acquire up to 36 digital
lines time-correlated with analog waveforms and completely
integrated with
FlexRay
the scope operation. In addition to
acquiring digital lines,
2 they are also helpful
for monitoring low-speed signals, such
as serial data clock, data, and chip select
signals, thus preserving the analog
channels for higher speed requirements.
(Note: Triggering on digital lines is not
FlexRay
possible
usedLIN
with LabMaster).
UART when
UART
I2C
FlexRay
IC
2
SPI
UART
UART
FlexRay, MIL-STD-1553 and many others) are
also available.
FlexRay
signal options
IC
A
LIN B
true-hardware serial trigger (option, available
I C triggers,
A 10 different SMART
SPIfouronly),
UART
Fully Integrated Mixed Signal
UART
UART
LIN
I2C
SPI
2C
UARTOption
UART
LIN
IOscilloscope
SPI (4+36)
FlexRay
FlexRay
wth 9xxMZi-A Master Acquisition Module
UART
High bandwidth differential probes
(up to 25 GHz), single-ended active
probes, current probes, high-voltage,
and mixed signal options all connect to
the LabMaster 9 Zi-A Master Acquisition
Module. All LabMaster 9 Zi-A Master
Acquisition Modules contain selectable
50 Ω and 1 MΩ input capability and
can be used with any Teledyne LeCroy
probe—passive or active—without
requiring external adapters or power
supplies. Acquisition Modules from
13–45 GHz support ProLink probe
connections, and support 2.92 mm probe
connections from 25 to 36 GHz, and
2.4 mm connections at 45 GHz.
FlexRay
15 GHz Edge Trigger
LIN
FlexRay
SPI
UART
SPI
UART
LIN
UAR
Deep Insight Clarifies Complex Signals
All Oscilloscope Tools are
not Created Equal
LabMaster 9 Zi-A has the deepest
standard toolbox of any oscilloscope,
providing more measure, math,
graphing, statistical, and other tools,
and more ways to leverage the
tools to get the answer faster. While
many other oscilloscopes provide
similar looking tools, Teledyne
LeCroy allows the most flexibility in
applying the tools to any waveform.
Customized Tools
Only Teledyne LeCroy completely
integrates third party programs into
the oscilloscope’s processing stream
by allowing you to create and deploy
a new measurement or math algorithm directly into the oscilloscope
environment and display the result
on the oscilloscope in real-time!
There is no need to run a separate
program, or ever leave the
oscilloscope window. Use C/C++,
MATLAB, Excel, JScript (JAVA),
and Visual Basic to create your
own customized math functions,
measurement parameters, or
other control algorithms.
X-Stream II fast throughput streaming architecture makes difficult analysis and deep
insight possible. Above, an FFT is applied to a 50 Mpts waveform to determine root
cause failure. The high frequency resolution this provides enables deep insight into
signal pathologies.
Graphical Track, Trend,
and Histogram Views
Track plots measurement values
on the Y-axis and time on the X-axis
to display a measurement change
time-correlated to the original
channel acquisition—perfect for
intuitive understanding of behaviors in frequency modulated (FM)
or pulse width modulated (PWM)
circuits and jitter measurements,
including modulation or spikes.
Histograms provide a visual
XDEV Customization software package being used to implement
a 1 MHz Butterworth filter using MATLAB®.
distribution representation of a
large sample of measurements,
allowing faster insight. Trends
are ideal for plotting slow changes
in measurement values.
Capture a single clock channel (yellow) and
display Track graphs and Histograms
simultaneously of multiple jitter parameters.
21
High Bandwidth Probing Solutions
Ultra-wideband Architecture
for Superior Signal Fidelity
Teledyne LeCroy’s WaveLink® high
bandwidth differential probes utilize
advanced differential traveling wave
(distributed) amplifier architecture to
achieve superior high frequency analog
broadband performance.
Highest Bandwidth (25 GHz)
Solder-In Lead
Up to 25 GHz Solder-In performance
with system (probe + oscilloscope)
rise times equal to that of the
oscilloscope alone.
Ultra-compact Positioner
(Browser) Tip
D2505-A-PS 25 GHz probe system with Solder-In lead and browser positioner tip.
The most compact positioner tip browser
with bandwidth up to 22 GHz makes
probing in confined areas easy.
Bandwidth
Superior Probe Impedance
Minimizes Circuit Loading
Rise Time (10–90%)
Circuit and signal loading is reduced by
more than 50% with WaveLink high
bandwidth probes compared to
competitive probes. In the mid-band
frequency range, the difference is even
more apparent.
Superior Signal Fidelity and
Lowest Noise
WaveLink has exceptional noise performance. In fact, the combination of the
probe and the oscilloscope results in
measurement performance that is nearly
identical to that of a cable input.
Rise Time (20–80%)
Noise (Probe)
D1305-A,
D1305-A-PS
D1605-A,
D1605-A-PS
D2005-A,
D2005-A-PS
D2505-A,
D2505-A-PS
Dxx05-SI and
Dxx05-PT Tips
13 GHz
Dxx05-SI and
Dxx05-PT Tips
16 GHz
Dxx05-SI and
Dxx05-PT Tips
20 GHz
Dxx05-SI Lead
25 GHz
Dxx05-SI and
Dxx05-PT Tips
32.5 ps (typical)
Dxx05-SI and
Dxx05-PT Tips
28 ps (typical)
Dxx05-SI and
Dxx05-PT Tips
20 ps (typical)
Dxx05-SI Lead
17.5 ps (typical)
Dxx05-SI and
Dxx05-PT Tips
24.5 ps (typical)
Dxx05-SI and
Dxx05-PT Tips
21 ps (typical)
Dxx05-SI and
Dxx05-PT Tips
15 ps (typical)
Dxx05-SI Lead
13 ps (typical)
< 14 nV/√Hz
(1.6 mVrms)
(typical)
< 14 nV/√Hz
(1.8 mVrms)
(typical)
< 18 nV/√Hz
(2.5 mVrms)
(typical)
< 18 nV/√Hz
(2.8 mVrms)
(typical)
Input Dynamic Range
2.0 Vpk-pk, (±1.0 V) (nominal)
Input Common Mode
Voltage Range
±4 V (nominal)
Input Offset Voltage
Range
±2.5 V Differential (nominal)
Impedance
(mid-band, typical)
Dxx05-PT Tip
22 GHz typical
20 GHz guaranteed
Dxx05-PT Tip
14 ps (typical)
Dxx05-SI Lead: 300 Ω at 6 GHz, 525 Ω at 13 GHz,
600 Ω at 16 GHz, 300 Ω at 20 GHz, 120 Ω at 25 GHz
Dxx05-PT Tip: 160 Ω at 6 GHz, 450 Ω at 13 GHz,
240 Ω at 16 GHz, 210 Ω at 20 GHz
Dxx30-PS Differential Probe Systems
Available in 8, 10, and 13 GHz, the Dxx30 models have an optional
SMA/SMP lead set for attaching to the device under test (DUT).
Additionally, solder-in, positioner (browser) tip, and square pin
leads are available.
22
Dxx05-PT Tip
19 ps (typical)
Broad Range of Probing Solutions
LabMaster 9 Zi-A acquisition modules support a broad range of probes for a variety of applications.
(Note: all modules don’t include 1 MΩ input capability necessary for some probes - consult
specifications for details).
ZS Series High Impedance Active Probes
High-Voltage Differential Probes
• 1 GHz (ZS1000) and 1.5 GHz
• 20 MHz and
(ZS1500) bandwidths
• High Impedance (0.9 pF, 1 MΩ)
100 MHz ­bandwidth
• 1,000 Vrms
common mode voltage
• E
xtensive standard and
­available probe tip and ground
connection accessories
• 1,400 Vpeak
differential voltage
• ±12 Vdc offset (ZS1500)
• EN 61010 CAT III
• Teledyne LeCroy ProBus system
• 80 dB CMRR at 50/60 Hz
• Teledyne LeCroy ProBus system
High-Voltage Passive Probes
• S
uitable for safe, accurate
high-voltage measurements
• 1.2 kV to 20 kV
• W
orks with any
1 MΩ input oscilloscope
WaveLink Differential Probes
• 4 and 6 GHz models
• Solder-In, Browser,
Quick Connect, Square Pin,
Positioner Tip
and HiTemp Cables
Current Probes
WaveLink Medium
Bandwidth Differential Probes
• Range of probes from 30 Arms (50 Apeak)
• 8, 10, and 13 GHz models
to 500 Arms (700 Apeak)
• 3.5 Vp-p Input Dynamic Range
• 2 MHz to 100 MHz bandwidths
• ±4 V Offset
• S
mall form factor
accommodates large
conductors with
small jaw size
• S
older-in, Positioner
(Browser), Square Pin, and
SMA/SMP lead connection
• T
eledyne LeCroy ProBus
system
Optical-to-Electrical Converter (OE695G)
• Frequency range DC to
ZD Series Differential Probes
• 200 MHz, 500 MHz, 1 GHz
and 1.5 GHz bandwidths
• Wide range of probing
accessories
• T
eledyne LeCroy ProBus
system
9.5 GHz (electrical, -3 dB)
• Reference receiver support
from 8GFC to 10GFC FEC,
or Custom (<12.5 Gb/s)
• 62.5/125 µm multi-mode or
single-mode fiber input
• Broad wavelength range (750 to 1650 nm)
• +7 dBm (5 mW) max peak optical power
23
specifications
Standard
Standard (cont’d)
Math Tools
Advanced Customization
Display up to 8 math function traces (F1 – F8). The easy-to-use graphical
interface simplifies setup of up to two operations on each function trace,
and function traces can be chained together to perform math-on-math.
Provides capability to create a math function or measurement parameter in
MATLAB, Excel, C++, JavaScript, or Visual Basic Script (VBS) format and insert
it into the oscilloscope’s processing stream. All results are processed and
displayed on the oscilloscope grid, and are available for further processing.
Also permits the creation of customized plug-ins that can be inserted into the
scope user interface, control of the scope via Visual Basic scripts embedded in
customized functions, and use of Teledyne LeCroy’s Custom DSO capabilities.
absolute value
average (summed)
average (continuous)
correlation
(two waveforms)
derivative
deskew (resample)
difference (–)
enhanced resolution
(to 11-bits vertical)
envelope
exp (base e)
exp (base 10)
fft (power spectrum, magnitude,
phase, up to max Mpts)
floor
integral
interpolate (cubic, ­quadratic, sinx/x)
invert (negate)
log (base e)
log (base 10)
product (x)
ratio (/)
reciprocal
rescale (with units)
roof
sparse
square
square root
sum (+)
zoom (identity)
Measure Tools
Display any 12 parameters together with statistics, including their average,
high, low, and standard deviations. Histicons provide a fast, dynamic view of
parameters and wave shape characteristics. Parameter Math allows addition,
subtraction, multiplication, or division of two different parameters.
amplitude
level @ x
rms
area
maximum
std. deviation
base
mean
top
cycles
median
width
data
minimum
median
delay
narrow band phase
phase
∆ delay
narrow band power
time @ minimum (min.)
duty cycle
number of points
time @ maximum (max.)
duration
+ overshoot
∆ time @ level
falltime (90–10%,
– overshoot
∆ time @ level
80–20%, @ level)
from trigger
peak-to-peak
frequency
x @ max.
period
first
x @ min.
risetime (10–90%,
last
20–80%, @ level)
Pass/Fail Testing
Simultaneously test multiple parameters against selectable parameter ­limits
or pre-defined masks. Pass or fail conditions can initiate actions including
­document to local or networked files, e-mail the image of the failure, save
waveforms, send a pulse out at the front panel auxiliary BNC output, or (with
the GPIB option) send a GPIB SRQ.
Software Options
SDAIII Serial Data Analysis Software (LM9Zi-SDAIII)
(Included in LM9Zi-SDAIII option, Standard on SDA MCM-Zi and
DDA MCM-Zi Models)
Total Jitter
A complete jitter measurement and analysis toolset with the SDAIII-CompleteLinQ user interface framework. The CompleteLinQ framework provides a single
user interface for “LinQ”, “Crosstalk”, “EyeDrII” and “Virtual Probe” capabilities
(purchased separately).
SDAIII provides complete serial data and clock jitter and eye diagram
measurement and analysis capabilities. Eye Diagrams with millions of UI are
quickly calculated from up to 512 Mpt records, and advanced tools may be used
on the Eye Diagram to aid analysis. Complete TIE and Total Jitter (Tj) parameters
and analysis functions are provided. Comparison of eye diagrams and jitter
analysis between captured lanes and one “reference” location is provided.
Includes:
• Time Interval Error (TIE) Measurement Parameter, Histogram, Spectrum and
Jitter Track
• Total Jitter (Tj) Measurement Parameter, Histogram
• Spectrum
• Eye Diagram Display (sliced)
• Eye Diagram IsoBER (lines of constant Bit Error Rate)
• Eye Diagram Mask Violation Locator
• Eye Diagram Measurement Parameters
– Eye Height
– One Level
– Zero Level
– Eye Amplitude
– Eye Width
– Eye Crossing
– Avg. Power
– Extinction Ratio
– Mask hits
– Mask out
– Bit Error Rate
– Slice Width ­(setting)
• Q-Fit Tail Representation
• Bathtub Curve
• Cumulative Distribution Function (CDF)
• PLL Track
Jitter Decompostion Models
Basic Jitter and Timing Analysis Tools
Three dual-dirac jitter decomposition methods are provided for maximum
measurement flexibility. Q-Scale, CDF, Bathtub Curve, and all jitter
decomposition measurement parameters can be displayed using any of the
three methods.
This package provides toolsets for displaying parameter values vs. time,
statistical views of parameters using histograms, and persistence view math
functions. These tools include:
• Spectral, Rj Direct
• Spectral, Rj+Dj CDF Fit
• NQ-Scale
• “Track” graphs of all parameters, no limitation of number
– Cycle-Cycle Jitter
– Period @ level
– Setup
– N-Cycle
– Half Period
– Hold
– N-Cycle with
– Width @ level
– Skew
start selection
– Time Interval
– Duty Cycle @ level
– Frequency @ level
Error @ level
– Duty Cycle Error
• Histograms expanded with 19 histogram parameters and up to 2 billion events
• Random Jitter (Rj) Meas Param
• Periodic Jitter (Pj) Meas Param
• Rj+BUj Histogram
• Trend (datalog) of up to 1 million events
• Deterministic Jitter (Dj) Measurement Parameter
• Track graphs of all parameters
• Persistence histogram, persistence (range, sigma)
24
Random Jitter (Rj) and Non-Data Dependent Jitter (Rj+BUj) Analysis
• Rj+BUj Spectrum
• Rj+BUj Track
• Pj Inverse FFT
Deterministic Jitter (Dj) Analysis
specifications
Software Options (cont’d)
Software Options (cont’d)
SDAIII Serial Data Analysis Software (continued)
Data Dependent Jitter (DDj) Analysis
• Data Dependent Jitter (DDj) Param
• Duty Cycle Distortion (DCD) Param
• InterSymbol Interference (ISI) Param
• Digital Pattern display
• DDj Plot (by Pattern or N-bit Sequence)
• DDj Histogram
• ISI Plot (by Pattern)
Reference Lane
• Compare current acquisition to Reference with a side-by-side or single
(tabbed) display mode
SDAIII “LinQ” Capability
(SDAIII-LinQ, SDAIII-CrossLinQ, and SDAIII-CompleteLinQ Options)
In addition to all SDAIII capabilities, “LinQ” options includes 4 lanes of simultaneous serial data analysis plus the reference lane. If EyeDrII or VirtualProbe are
purchased with SDAIII “LinQ” capability, then those capabilities are provided
for all four lanes.
Lanescape Comparison Mode
When multiple lanes are enabled for display, Lanescape Comparison Modes is
used. Selections for this mode are as follows:
• Single: One lane is displayed at a time.
• Dual: Two lanes are selected for display.
• Mosaic: All enabled lanes are displayed.
SDAIII “Crosstalk” Capability
(Included in SDAIII-Crosstalk and SDAIII-CrossLinQ Options)
In addition to all SDAIII capabilities, “Crosstalk” options add the following
noise and crosstalk measurements and analysis tools:
• Total, Random and Deterministic noise (Tn, Rn, Dn) measurements
• Breakdown of Dn into InterSymbol Interference noise (ISIn) and
Periodic noise (Pn)
• Noise-based eye height and width: EH(BER) and EW(BER)
• Random noise (Rn) + Bounded Uncorrelated noise (BUn) Noise Histogram
• Q-fit for Noise Histogram
• Rn+Bun Noise Spectrum and Peak threshold
• Pn Inverse FFT Plot
• Rn+Bun Noise Track
• Crosstalk Eye Contour Plot
SDAIII-CompleteLinQ
The ultimate in serial data single or multi-lane link analysis. Provides all the
capabilities mentioned above in SDAIII, “LinQ”, and “Crosstalk”, and also
includes EyeDrII and Virtual Probe capabilities.
Clock and Clock-Data Timing Jitter Analysis Package (LM9Zi-JITKIT)
Provides convenient setup and four views of jitter (statistical, time, spectrum,
and overlaid) for a variety of horizontal, amplitude, and timing parameters.
Direct display of jitter measurement values. Supports multiple simultaneous
views with fast selection of multiple parameter measurements for fast and
easy validation.
Cable De-embedding (LM9Zi-CBL-DE-EMBED)
(Standard on SDA MCM-Ziand DDA MCM-Zi)
Removes cable effects from your measurements. Simply enter the S-parameters or attenuation data of the cable(s) then all of the functionality of the SDA 8
Zi can be utilized with cable effects de-embedded.
8b/10b Decode (LM9Zi-8B10B D)
(Standard on SDA MCM-Zi and DDA MCM-Zi
Intuitive, color-coded serial decode with powerful search capability enables
­captured waveforms to be searched for user-defined sequences of symbols.
Multi-lane analysis decodes up to four simultaneously captured lanes.
Spectrum Analyzer Mode (LM9Zi-SPECTRUM)
This package provides a new capability to navigate waveforms in the frequency
domain using spectrum analyzer type controls. FFT capability added to include:
• Power averaging
• Power density
• Real and imag components
• Freq domain parameters
• FFT on up to 128 Mpts
Disk Drive Measurements Package (LM9Zi-DDM2)
(Standard on DDA MCM-Zi)
This package provides disk drive parameter measurements and related
mathematical functions for performing disk drive WaveShape Analysis.
Disk Drive Parameters are as follows:
– amplitude ­assymetry
– local base
– local baseline s­ eparation
– local maximum
– local minimum
– local number
– local peak-peak
– local time between events
– local time between peaks
– local time between troughs
– local time at minimum
– local time at maximum
– local time p
­ eak-trough
– local time over threshold
– local time t­ rough-peak
– local time under threshold
– narrow band phase
– narrow band power
– overwrite
– pulse width 50
– pulse width 50 –
– pulse width 50 +
– resolution
– track average ­amplitude
– track average ­amplitude –
– track average a­ mplitude +
– auto-correlation s/n
– non-linear transition shift
Eye Doctor II Advanced Signal Integrity Tools (LM9Zi-EYEDRII)
Complete set of channel emulation, de-embedding and receiver equalization
simulation tools. Provides capability to emulate a serial data link, de-embed or
embed a fixture, cable or serial data channel, add or remove emphasis, and perform CTLE, FFE, or DFE equalization. If purchased with SDAIII, then capabilities
are accessed from within the SDAIII-CompleteLinQ user interface framework.
Virtual Probe Signal Integrity Tools (LM9Zi-VIRTUALPROBE)
Provides ability to define a complex serial data channel or topology with up to
six circuit elements that may be embedded or de-embedded, allowing “probing” at a location different than the measured position. If purchased with
SDAIII and EyeDrII (or with the EYEDRII-VP or CompleteLinQ options), then
capabilities are accessed from within the single SDAIII-CompleteLinQ user
interface framework.
25
specifications
13 GHz
16 GHz
20 GHz
LabMaster 9 Zi-A LabMaster 9 Zi-A LabMaster 9 Zi-A
30 GHz
LabMaster 9 Zi-A
45 GHz
LabMaster 9 Zi-A
30 GHz
45 GHz
20 GHz
(≥ 10 mV/div)
20 GHz
(≥ 10 mV/div)
Vertical System
Analog Bandwidth
@ 50 Ω (-3 dB) (2.4/2.92 Inputs)
Analog Bandwidth
@ 50 Ω (-3 dB) (ProLink Input)
Analog Bandwidth
@ 50 Ω (-3 dB) (ProBus Input)
Analog Bandwidth
@ 1 MΩ (-3 dB) (ProBus Input)
Rise Time (10–90%, 50 Ω)
Rise Time (20–80%, 50 Ω)
Input Channels
Bandwidth Limiters
Input Impedance
Input Coupling
Maximum Input Voltage
26
13 GHz
(≥ 10 mV/div)
16 GHz
(≥ 10 mV/div)
20 GHz
(≥ 10 mV/div)
For 9xxMZi-A “Master” Acquisition Module: 3.5 GHz (≥10 mV/div)
For MCM-Zi Master Control Module: Not Applicable
For 9xxMZi-A “Master” Acquisition Module: 500 MHz (typical, ≥2 mV/div)
For MCM-Zi Master Control Module: Not Applicable
32.5 ps
28.5 ps
22 ps
15.5 ps
10.5 ps
(test limit,
(test limit,
(test limit,
(test limit,
(test limit,
flatness mode)
flatness mode)
flatness mode)
flatness mode)
flatness mode)
24.5 ps
21.5 ps
16.5 ps
11.5 ps
8.0 ps
(flatness mode)
(flatness mode)
(flatness mode)
(flatness mode)
(flatness mode)
Up to 80, depending on
Up to 40 @ 30 GHz.
Up to 20 @ 45 GHz
configuration selected.
Up to 80 @ 20 GHz
Up to 40 @ 30 GHz
(Any combination of up to 80 ProLink
(Any combination of 20
Up to 80 @ 20 GHz
input channels,
GHz ProLink inputs or 2
(Any combination of
or 4 ProBus input channels)
ProBus input channels). 20 GHz ProLink inputs or
Max number of channels 2 ProBus input channels).
depends on configuration Max number of ­channels
selected
depends on configuration
selected
For ≤ 20 GHz Mode:
20 MHz,
20 MHz,
20 MHz,
For ≤20 GHz Mode:
20 MHz, 200 MHz,
200 MHz,
200 MHz,
200 MHz,
20 MHz, 200 MHz,
1 GHz, 4 GHz, 6 GHz,
1 GHz,
1 GHz,
1 GHz,
1 GHz, 4 GHz, 6 GHz,
8 GHz, 13 GHz, 16 GHz
4 GHz,
4 GHz,
4 GHz,
8 GHz, 13 GHz, 16 GHz
6 GHz,
6 GHz,
6 GHz,
For 25 and
8 GHz
8 GHz,
8 GHz,
30 GHz Mode:
For > 20 GHz Mode:
13 GHz
13 GHz,
20 GHz, 25 GHz, 30 GHz
20 GHz, 25 GHz
16 GHz
For 45 GHz Mode: none
ProLink Inputs:
2.92mm Inputs:
2.4/2.92mm Inputs:
50 Ω ±2% for ≤ 100 mV/div,
50 Ω ±2% for
50 Ω ±2% for
50 Ω ±3% for > 100 mV/div
≤ 79 mV/div,
≤ 79 mV/div,
50 Ω ±3% for
50 Ω ±3% for
ProBus Inputs:
> 79 mV/div
> 79 mV/div
50 Ω ±2% or 1 MΩ || 16pF,
10 MΩ || 11 pF with supplied Probe
ProLink Inputs:
ProLink Inputs:
50 Ω ±2% for
50 Ω ±2% for
≤ 100 mV/div,
≤ 100 mV/div,
50 Ω ±3% for
50 Ω ±3% for
> 100 mV/div
> 100 mV/div
ProBus Inputs:
ProBus Inputs:
50 Ω ±2% or 1 MΩ ||16pF, 50 Ω ±2% or 1 MΩ ||16pF,
10 MΩ || 11 pF
10 MΩ || 11 pF
with supplied Probe
with supplied Probe
2.92 mm Inputs:
2.4/2.92 mm Inputs:
ProLink Inputs:
50 Ω: DC, GND
50 Ω: DC, GND
50 Ω: DC, GND
ProLink Inputs:
ProLink Inputs:
ProBus Inputs:
50 Ω: DC, GND
50 Ω: DC, GND
1 MΩ: AC, DC, GND; 50 Ω: DC, GND
ProBus Inputs:
ProBus Inputs:
1 MΩ: AC, DC, GND;
1 MΩ: AC, DC, GND;
50 Ω: DC, GND
50 Ω: DC, GND
2.4/2.92 mm Inputs:
2.92 mm Inputs:
50 Ω (ProLink):
±2 Vmax @ ≤ 100mV/div, ±2 Vmax @ ≤ 100mV/div,
±2 Vmax @ ≤ 100mV/div,
5.5Vrms @ > 100mV/div
5.5Vrms @ > 100mV/div
5.5Vrms @ > 100mV/div
50 Ω (ProLink):
50 Ω (ProLink):
50 Ω (ProBus):
±2 Vmax @ ≤ 100mV/div, ±2 Vmax @ ≤ 100mV/div,
±5 Vmax, 3.5 Vrms
5.5Vrms @ > 100mV/div
5.5Vrms @ > 100mV/div
1 MΩ (ProBus):
50 Ω (ProBus):
50 Ω (ProBus):
250 V max. (peak AC: < 10 kHz + DC)
±5 Vmax, 3.5 Vrms
±5 Vmax, 3.5 Vrms
1 MΩ (ProBus):
1 MΩ (ProBus):
250 V max. (peak AC:
250 V max. (peak AC:
< 10 kHz + DC)
< 10 kHz + DC)
specifications
13 GHz
16 GHz
20 GHz
LabMaster 9 Zi-A LabMaster 9 Zi-A LabMaster 9 Zi-A
30 GHz
LabMaster 9 Zi-A
45 GHz
LabMaster 9 Zi-A
Vertical System (cont’d)
Channel-Channel Isolation
Vertical Resolution
Sensitivity
DC Vertical Gain Accuracy
(Gain Component of
DC Accuracy)
Vertical Noise Floor
(50 mV/div)
Offset Range
DC Vertical Offset Accuracy
DC to 10 GHz: 50 dB (> 315:1)
10 to 15 GHz: 46 dB (> 200:1)
15 to 20 GHz: 40 dB (> 100:1)
(For any two ProLink input channels,
same or different v/div settings, typical)
DC to 10 GHz: 50 dB (> 315:1)
10 to 15 GHz: 46 dB (> 200:1)
15 to 20 GHz: 40 dB (> 100:1)
20 GHz to Max BW: 30 dB (> 32:1)
(For any two ProLink or 2.92 mm input channels,
same or different v/div settings, typical)
8 bits; up to 11 bits with enhanced resolution (ERES)
50 Ω (ProLink):
50 Ω (2.92 mm):
50 Ω (2.4/2.92 mm):
2 mV–1 V/div, fully variable (2–9.9 mV/div
10 mV–500 mV/div,
10 mV–500 mV/div,
via zoom)
fully variable
fully variable
50 Ω (ProBus):
50 Ω (ProLink):
50 Ω (ProLink):
2 mV–1 V/div, fully variable;
2 mV–1 V/div,
2 mV–1 V/div,
fully variable
fully variable (2-9.9 mV/div
1 MΩ (ProBus):
(2–9.9 mV/div via zoom)
via zoom)
2 mV–10 V/div, fully variable
50 Ω (ProBus):
50 Ω (ProBus):
2 mV–1 V/div,
2 mV–1 V/div,
fully variable
fully variable
1 MΩ (ProBus):
1 M Ω (ProBus):
2 mV–10 V/div,
2 mV–10 V/div,
fully variable
fully variable
±1% F.S. (typical), offset at 0 V; ±1.5% F.S. (test limit), offset at 0 V
1.80 mVrms
(typical)
1.90 mVrms
(typical)
2.20 mVrms
(typical)
2.90 mVrms
(typical)
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 100 mV/div–1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 100 mV/div–1 V/div
1 MΩ:
±1V @ 2–140 mV/div
±10 V @ 142m V–1.40 V/div
±100 V @ 1.42 V–10 V/div
50 Ω (2.92 mm):
±500 mV @ 10–79 mV/div
±4 V @ 80 mV/div–500 mV/
div
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 100 mV/div–1 V/
div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 100 mV/div –1
V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130 mV–1.28 V/div
±100 V @ 1.3V–10 V/div
±(1.5% of offset setting +1.5% F.S. +1 mV) (test limit)
3.90 mVrms
(typical)
50 Ω (2.4/2.92 mm):
±500 mV @ 10–79 mV/div
±4 V @ 80 mV/div–500 mV/
div
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 100 mV/div–1 V/
div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 100 mV/div –1
V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130 mV–1.28 V/div
±100 V @ 1.3V–10 V/div
Horizontal System
Timebases
Time/Division Range
Clock Accuracy
Internal timebase with 10 GHz clock frequency common to all input channels.
Single, distributed 10 GHz clock for all channels ensures precise synchronization with timing accuracy
between all channels identical to that provided within a single, conventional oscilloscope package
Real-time Mode:
For ≥ 25 GHz Mode:
20 ps/div–64 s/div;
Real-time Mode:
20 ps/div–640 µs/div,
RIS Mode:
depending on memory length
20 ps/div–10 ns/div, user selectable at ≤10ns/div;
For ≤ 20 GHz Mode:
Roll Mode:
Real-time Mode:
Not Available
20 ps/div–64 s/div;
RIS Mode:
20 ps/div–10 ns/div, user selectable at ≤10ns/div;
Roll Mode:
Not Available
< 1 ppm + (aging of 0.5 ppm/yr from last calibration)
27
specifications
13 GHz
16 GHz
20 GHz
LabMaster 9 Zi-A LabMaster 9 Zi-A LabMaster 9 Zi-A
Horizontal System (cont’d)
Noise
Sample Clock Jitter
2
2*
Jitter Measurement Floor
Noise
2
SlewRate
Noise
2
SlewRate
Jitter Between Channels
(TIE, typical, measured at
maximum bandwidth)
Trigger and Interpolator Jitter
Channel-Channel Deskew
Range
External Timebase Reference
(Input)
External Timebase Reference
(Output)
<325 fsrms
Up to 10
μs Jitter)
Acquired
Time Range:
2 seconds
+ (Sample
Clock
rms (TIE)
+ (Sample Clock Jitter)2 (RMS) + (clock accuracy * reading) (seconds)
+ (Sample Clock Jitter)2 secondsrms (TIE)
<300 fsrms
2*
Noise
45 GHz
LabMaster 9 Zi-A
100fsrms (Internal Timebase Reference)
Up to 6.4 ms Acquired Time Range:
150fsrms (Internal Timebase Reference)
SlewRate
Delta Time Measurement
Accuracy
30 GHz
LabMaster 9 Zi-A
2
<250 fsrms
+ (Sample Clock Jitter)2 (RMS) + (clock accuracy
reading) (seconds)
*
< 0.1 psrms (typical, software assisted), 2 psrms (typical, hardware)
SlewRate
±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
10 MHz; 50 Ω impedance, applied at the rear input of 9xxMZi-A Master Acquisition Module
or MCM-Zi Master Control Module
10 MHz; 50 Ω impedance, output at the rear of 9xxMZi-A Master Acquisition Module
or MCM-Zi Master Control Module
Acquisition System
Single-Shot Sample Rate/Ch
Random Interleaved Sampling
(RIS)
Maximum Trigger Rate
120 GS/s on each channel
in 45 GHz Mode
80 GS/s on each
channel in ≥ 25 GHz
Mode
40 GS/s on each
channel in ≤ 20 GHz
Mode
(80 GS/s in < 20 GHz
Mode when combining
channels using the
optional WM8Zi-2X80GS
External Interleaving
Device)
200 GS/s for repetitive signals
For ≥ 25 GHz Mode:
(20 ps/div to 10 ns/div)
Not Applicable
For < 25 GHz Mode:
200 GS/s for repetitive signals
(20 ps/div to 10 ns/div)
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
40 GS/s on each channel.
(80 GS/s when combining channels using the optional
WM8Zi-2X80GS
External Interleaving Device)
Intersegment Time
Maximum Acquisition Memory
Standard Memory
(4 Ch / 2 Ch / 1Ch)
(Number of Segments)
28
80 GS/s on each channel
in ≥ 25 GHz Mode.
40 GS/s on each channel
in ≤ 20 GHz Mode.
(80 GS/s in ≤ 20 GHz
Mode when combining
channels using the optional
WM8Zi-2X80GS External
Interleaving Device)
1 μs
256 Mpts/Ch
20M / 20M / 20M
(2000)
Memory and Sample Rate
can be doubled in half channel mode with use of
WM8Zi-2X80GS External Interleaving Device.
512 Mpts/Ch
(2 Ch operation)
40 M / 40 M / 40M
(1000)
(In ≤ 20 GHz Modes,
reference memory
specification for 20 GHz
LabMaster)
768 Mpts/Ch
(1 Ch operation)
60M / 60M / 60M
(1000)
(In < 30 GHz or
< 20 GHz Modes,
reference memory
specification for
30 GHz and 20 GHz
LabMasters)
specifications
13 GHz
16 GHz
20 GHz
LabMaster 9 Zi-A LabMaster 9 Zi-A LabMaster 9 Zi-A
Acquisition System (cont’d)
Memory Options
(4 Ch / 2 Ch / 1 Ch)
(Number of Segments)
S-32 Option:
32M / 32M / 32M
(7,500)
M-64 Option:
64M / 64M / 64M
(15,000)
L-128 Option:
128M / 128M / 128M
(15,000)
VL-256 Option:
256M / 256M / 256M
(15,000)
Note: On all memory options,
memory and sample Rate
can be doubled in half channel mode with use of
WM8Zi-2X80GS External Interleaving Device.
30 GHz
LabMaster 9 Zi-A
45 GHz
LabMaster 9 Zi-A
S-32 Option:
64M / 64M / 64M
(3,500)
M-64 Option:
128M / 128M / 128M
(7,500)
L-128 Option:
256M / 256M / 256M
(15,000)
VL-256 Option:
512M / 512M / 512M
(15,000)
(In ≤ 20 GHz Modes,
reference memory
specification for 20 GHz
LabMaster)
S-32 Option:
96M / 96M / 96M
(3,500)
M-64 Option:
192M / 192M / 192M
(15,000)
L-128 Option:
384M / 384M / 384M
(15,000)
VL-256 Option:
768M / 768M / 768M
(15,000)
(In < 30 GHz or
< 20 GHz Modes,
reference memory
specification for
30 GHz and 20 GHz
LabMasters
Acquisition Processing
Averaging
Enhanced Resolution (ERES)
Envelope (Extrema)
Interpolation
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
From 8.5 to 11-bits vertical resolution
Envelope, floor, or roof for up to 1 million sweeps
Linear or Sin x/x
Triggering System
Modes
Sources
Coupling Mode
Pre-trigger Delay
Post-trigger Delay
Hold-off by Time or Events
Internal Trigger Range
Trigger Sensitivity with
Edge Trigger
(2.4 / 2.92mm Inputs)
Trigger Sensitivity with
Edge Trigger
(ProBus Inputs)
Trigger Sensitivity with
Edge Trigger
(ProLink Inputs)
Normal, Auto, Single, and Stop
Using 9xxMZi-A Master Acquisition Module: Any Ch 1-4 (Edge, Window, TV, SMART, Cascade triggers),
AUX or AUX/10, or internal Fast Edge on 9xxMZi-A;
any input channel (Edge trigger only) on 9xxSZi-A Acquisition Modules (Channels 5 and higher).
Using MCM-Zi Master Control Module: Any Ch 1-4 of the first 9xxSZi-A Acquisition Module input (Edge, Window, TV,
SMART, Cascade triggers), or internal Fast Edge on the MCM-Zi module;
any input channel (Edge trigger only) on additional 9xxSZi-A Acquisition Modules (Channels 5 and higher).
Slope and level unique to each source except line trigger.
DC, AC, HFRej, LFRej
0–100% of memory size (adjustable in 1% increments of 100 ns)
0–10,000 divisions in real time mode, limited at slower time/div settings
From 2 ns up to 20 s or from 1 to 99,999,999 events
±4.1 div from center
N/A
(For 9xxMZi-A “Master” Acquisition Module or Ch 1-4
of a 9xxSZi-A “Slave” Acquisition Module when used
with an MCM-Zi Master Control Module):
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
(For 9xxMZi-A “Master” Acquisition Module or Ch 1-4 of a 9xxSZi-A “Slave” Acquisition Module
when used with an MCM-Zi Master Control Module):
2 div @ < 3.5 GHz,
1.5 div @ < 1.75 GHz,
1.0 div @ < 200 MHz,
(for DC coupling, ≥ 10 mV/div, 50 Ω )
(For 9xxMZi-A
(For 9xxMZi-A “Master” Acquisition Module or
“Master” Acquisition
Ch 1-4 of a 9xxSZi-A “Slave” Acquisition Module when used with an MCM-Zi Master Control Module):
Module or Ch 1-4 of
3 div @ < 15 GHz,
a 9xxSZi-A “Slave”
1.5 div @ < 3 GHz,
Acquisition Module
1.0 div @ < 200 MHz
when used with an
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω)
MCM-Zi Master
Control Module):
3 div @ < 13 GHz,
1.5 div @ < 3 GHz,
1.0 div @ < 200 MHz
(for DC, AC, LFRej
coupling,
≥ 10 mV/div, 50 Ω)
29
specifications
13 GHz
16 GHz
20 GHz
LabMaster 9 Zi-A LabMaster 9 Zi-A LabMaster 9 Zi-A
30 GHz
LabMaster 9 Zi-A
45 GHz
LabMaster 9 Zi-A
Triggering System (cont’d)
External Trigger Sensitivity,
(Edge Trigger)
For 9xxMZi-A “Master” Acquisition Module only:
2 div @ < 1 GHz,
1.5 div @ < 500 MHz,
1.0 div @ < 200 MHz,
(for DC coupling)
For 9xxMZi-A Master Acquisition Module or Ch 1-4 of a 9xxSZi-A Acquisition Module when used with an
MCM-Zi Master Control Module: 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
For 9xxMZi-A “Master” Acquisition Module only: Aux (±0.4 V); Aux/10 (±4 V)
Max. Trigger Frequency,
SMART Trigger
External Trigger Input Range
Basic Triggers
Edge
Window
TV-Composite Video
Triggers when signal meets slope (positive, negative, or either) and level condition.
Triggers when signal exits a window defined by adjustable thresholds
Triggers NTSC or PAL with selectable line and field;
HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line;
or CUSTOM with selectable Fields (1–8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative)
SMART Triggers™
State or Edge Qualified
Qualified First
Dropout
Pattern
Triggers on any input source only if a defined state or edge occurred on another input source.
Holdoff between sources is selectable by time or events
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is
­satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events
Triggers if signal drops out for longer than selected time between 1 ns and 20 s
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be
high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern
SMART Triggers with Exclusion Technology
Glitch
Width (Signal or Pattern)
Interval (Signal or Pattern)
Timeout (State/Edge Qualified)
Runt
Slew Rate
Exclusion Triggering
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults
Triggers on intervals selectable between 1 ns and 20 s
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
Cascade (Sequence) Triggering
Capability
Types
Holdoff
Arm on “A” event, then Trigger on “B” event. Or Arm on “A” event, then Qualify on “B” event, and Trigger on “C”
event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout,
or Measurement. Measurement can be on Stage B only.
Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout,
or Measurement. Measurement can be on Stage C only.
Cascade A then B then C: Edge, Window, Pattern (Logic)
Cascade A then B then C then D: Edge, Window, Pattern (Logic),
or Measurement. Measurement can be on Stage D only.
Holdoff between A and B, B and C, C and D is selectable by time (1ns to 20s) or number of events.
Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between
the prior stage and the last stage.
High-speed Serial Protocol Triggering (Optional)
Data Rates
(Available only with 9xxMZi-A
Master Acquisition Module)
30
Pattern Length
Clock and Data Outputs
Option LM9Zi-6GBIT-80B-8B10B-TD:
600 Mb/s to 6.5 Gb/s,
Channel 4 input only
Option LM9Zi-14GBIT-80B-8B10B-TD:
600 Mb/s to 14.1 Gb/s, Channel 4 input only
Option LM9Zi-6GBIT-80B-8B10B-TD:
600 Mb/s to 6.5 Gb/s, Channel 4 input only
Option LM9Zi-14GBIT-80B-8B10B-TD:
600 Mb/s to 14.1 Gb/s, Channel 4 input only
(Note: Channel 3 input will capture signal for
triggering when oscilloscope is in ≥25 GHz mode)
80-bits, NRZ or eight 8b/10b symbols
No Clock and Data Recovery outputs provided
specifications
13 GHz
16 GHz
20 GHz
LabMaster 9 Zi-A LabMaster 9 Zi-A LabMaster 9 Zi-A
30 GHz
LabMaster 9 Zi-A
45 GHz
LabMaster 9 Zi-A
Low Speed Serial Protocol Triggering (Optional)
Optionally available
Measurement Trigger
Using 9xxMZi-A Master Acquisition Module:
I2C, SPI (SPI,SSPI,SIOP), UART-RS232, CAN, LIN, FlexRay, I2S (Audio), MIL-1553
Select from a large number of measurement parameters trigger on a measurement value with qualified limits.
Can be used as only trigger or last event in a Cascade Trigger.
Color Waveform Display
Type
Resolution
Number of Traces
Grid Styles
Waveform Representation
On 9xxMZi-A “Master” Acquisition Module or 9CZi-A Master Control Module:
Color 15.3” flat panel TFT-Active Matrix LCD with high resolution touch screen
WXGA; 1280 x 768 pixels
Display a maximum of 40 traces. Simultaneously display channel, zoom, memory and math traces
Auto, Single, Dual, Quad, Octal, X-Y, Single + X-Y, Dual + X-Y, Twelve, Sixteen, Twenty
Sample dots joined, or sample dots only
Integrated Second Display
Type
Resolution
Supports touch screen integration of user-supplied second display with split-grid capability.
(Note: touch screen driver for second display may not be a Fujitsu driver)
For 9xxMZi-A Master Acquisition Module - reqauires ordering of option LM9Zi-VIDEOCARD-Zi-EXTDISP-15 to replace
the standard video card in the LabMaster CPU, so performance described in “External Monitor Port” is no longer provided. MCM-Zi Master Control Module provides all video outputs required, and supports extended desktop operation.
Determined by display chosen by user
High-Speed Digitizer Output (Option)
Type
Transfer Rates
Output Protocol
Control Protocol
Command Set
Option LSIB-2. Installs in LabMaster 9xxMZi-A CPU or LabMaster MCM-Zi Master Control Module and uses one available PCIe slot normally used by a 9xxSZi-A Module.
up to 325 MB/s (typical) - Maximum of 4 channels (consult Teledyne LeCroy for >4 channels)
PCI Express, Gen 1 (4 lanes utilized for data transfer)
TCP/IP
Via Windows Automation, or via Teledyne LeCroy Remote Command Set
Processor/CPU
Type
Processor Memory
Operating System
Real Time Clock
In 9xxMZi-A CPU or MCM-Zi Master Control Module:
Intel® Xeon™ X5660 2.8 GHz (or better). There are two processors in each CPU, and each processor has 6 cores for a
total of 12 cores and an effective processor speed of 33.6 GHz
24 GB standard. Up to 192 GB optionally available
Microsoft Windows® 7 Professional Edition (64-bit)
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks
Setup Storage
Front Panel and
Instrument Status
Store to the internal hard drive, over a network, or to a USB-connected peripheral device
Interface
Remote Control
Network Communication
­Standard
GPIB Port (optional)
LSIB Port (optional)
Ethernet Port
USB Ports
External Monitor Port
Via Windows Automation, or via Teledyne LeCroy Remote Command Set
VXI-11 or VICP, LXI Class C (v1.2) Compliant
Supports IEEE – 488.2. Installs in LabMaster 9xxMZi-A CPU or MCM-Zi Master Control Module and uses one available PCIe slot normally used by a 9xxSZi-A Module
Supports PCIe Gen1 x4 protocol with Teledyne LeCroy supplied API. Installs in LabMaster 9xxMZi-A CPU or MCM-Zi
Master Control Module and uses one available PCIe slot normally used by a 9xxSZi-A Module
Supports 10/100/1000Base-T Ethernet interface (RJ45 port)
9xxMZi-A CPU or MCM-Zi Master Control Module:
minimum 2 total USB 2.0 ports on rear of unit to support Windows compatible devices
9xxMZi “Master” Acquisition Module or MCM-Zi Master Control Module:
minimum 3 total USB 2.0 ports on front of unit to support Windows compatible devices
In 9xxMZi-A CPU:
Dual Link DVI compatible to support internal display on 9xxMZi-A Master Acquisition Module
(1280 x 768 pixel resolution) or customer-supplied monitor with up to WQXGA (2560 x 1600 pixel) resolution.
Add LM9Zi-VIDEOCARD-EXTDESKTOP replacement videocard to support two DVI-D monitors
with extended desktop. (max 1920 x 1200 pixel resolution for both monitors).
In MCM-Zi Master Control Module:
Dual Link DVI compatible to support internal display on MCM-Zi Master Control Module (1280 x 768 pixel resolution)
and customer-supplied monitor with up to WQXGA (2560 x 1600 pixel) resolution using extended desktop mode.
31
Specifications
13 GHz
16 GHz
20 GHz
LabMaster 9 Zi-A LabMaster 9 Zi-A LabMaster 9 Zi-A
30 GHz
LabMaster 9 Zi-A
45 GHz
LabMaster 9 Zi-A
Power Requirements
Voltage
Max. Power Consumption
LabMaster 9xxMZi-A Master Acquisition Module and 9xxSZi-A: 100–240 VAC ±10% at 45–66 Hz; 100–120 VAC
±10% at 380–420 Hz; Automatic AC Voltage Selection, Installation Category II
LabMaster 9xxMZi-A CPU: 100–240 VAC ±10% at 45-66 Hz; Automatic AC Voltage Selection, Installation Category II
LabMaster MCM-Zi Master Control Module: 100–240 VAC ±10% at 45-66 Hz; Automatic AC Voltage Selection,
Installation Category II
9xxMZi-A Master Acq. Module – 850 W / 850 VA
9xxMZi-A Master Acq. Module – 900 W / 900 VA
9xxMZi-A CPU – 400 W / 400 VA
9xxMZi-A CPU – 400 W / 400 VA
9xxSZi-A Acq. Module – 700 W / 700 VA
9xxSZi-A Acq. Module – 750 W / 750 VA
MCM-Zi Master Control Module - 450 W / 450 VA.
MCM-Zi Master Control Module - 450 W / 450 VA.
Each Module and the CPU has a separate power cord
Each Module and the CPU has a separate power cord
Environmental
Temperature (Operating)
Temperature (Non-Operating)
Humidity (Operating)
Humidity (Non-Operating)
Altitude (Operating)
Altitude (Non-Operating)
Random Vibration (Operating)
Random Vibration
(Non-Operating)
Functional Shock
+5 °C to +40 °
–20 °C to +60 °C
5% to 80% relative humidity (non-condensing) up to +31 °C
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Up to 10,000 ft. (3048 m) at or below +25 °C
Up to 40,000 ft. (12,192 m)
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
20 gpeak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
Physical Dimensions
Dimensions (HWD)
Weight
Shipping Weight
9xxMZi-A Master Acquisition Module – 14" H x 18.4" W x 16" D (355 x 467 x 406 mm)
9xxMZi-A CPU – 5.7" H x 18.2" W x 20.8" D (145 mm x 462 mm x 527 mm)
9xxSZi-A Acquisition Module – 7" H x 18.2" W x 20.8" D (177 mm x 462 mm x 527 mm)
MCM-Zi Master Control Module - 10.9” H x 18.2” W x 15.6” D (277 x 462 x 396 mm)
9xxMZi-A Master Acquisition Module – 48 lbs. (22 kg)
930MZi-A Master Acq.
945MZi-A Master Acq.
9xxMZi-A CPU – 29 lbs. (13 kg)
Module – 55 lbs. (25 kg)
Module – 57 lbs. (26 kg)
9xxSZi-A Acquisition Module – 37 lbs. (17 kg)
9xxMZi-A CPU –
9xxMZi-A CPU –
MCM-Zi Master Control Module - 47 lbs. (21.4 kg)
29 lbs. (13 kg)
29 lbs. (13 kg)
93xSZi-A Acquisition Mod- 945SZi-A ­Acquisition Module – 44 lbs. (20 kg)
ule – 46 lbs. (21 kg)
MCM-Zi Master Control
MCM-Zi Master Control
Module - 47 lbs. (21.4 kg) Module - 47 lbs. (21.4 kg)
9xxMZi-A Master Acquisition Module – 70 lbs. (32 kg)
930MZi-A Master Acq.
945MZi-A Master Acq.
9xxMZi-A CPU – 36 lbs. (16 kg)
Module – 77 lbs. (35 kg)
Module – 79 lbs. (36 kg)
9xxSZi-A Acquisition Module – 44 lbs. (20 kg)
9xxMZi-A CPU –
9xxMZi-A CPU –
MCM-Zi Master Control Module - 56 lbs. (25.5 kg)
29 lbs. (13 kg)
29 lbs. (13 kg)
93xSZi-A Acquisition Mod- 945SZi-A Acq.Module –
ule –
53 lbs. (24 kg)
51 lbs. (23 kg)
MCM-Zi Master Control
MCM-Zi Master Control Module - 56 lbs. (25.5 kg))
Module - 56 lbs. (25.5 kg)
Certifications
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, EN61010-2-030,
UL 61010-1 3rd edition, and CSA C22.2 No. 61010-1-12
Warranty and Service
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services
32
ordering informAtion
Product Description
Product Code
Product Description
Product Code
LabMaster 9 Zi-A Series Master Control Modules
Included with LabMaster MCM-Zi Standard Configuration
LabMaster Master Control Module with 15.3”
WXGA Color Display.
SDA Master Control Module with 15.3” WXGA Color
Display (provides add’l standard software and
32 Mpt/Ch memory)
DDA Master Control Module with 15.3” WXGA Color
Display (provides add’l standard software and
32 Mpt/Ch memory)
SDA MCM-Zi
Power Cable for the Destination Country, Optical 3-button Wheel Mouse
USB 2.0, Printed Getting Started Manual, Anti-virus Software (Trial
Version), Microsoft Windows 7 License, Commercial NIST Traceable
Calibration with Certificate, 3-year Warranty
DDA MCM-Zi
Included with LabMaster 9xxMZi-A Standard Configuration
LabMaster MCM-Zi
LabMaster 9 Zi-A Series Master Acquisition Modules
÷10, 500 MHz Passive Probe (Qty. 4 on 4–20 GHz units, Qty. 2 on
30–45 GHz units) ProLink to K/2.92 mm Adapter: 4 each LPA-K-A,
PCIe x 8 cable, 2m long, DVI cable for WXGA connection, 2m long,
Power Cable (quantity 2) for the Destination Country, Optical 3-button
Wheel Mouse, USB 2.0, Printed Getting Started Manual, Anti-virus
Software (Trial Version), Microsoft Windows 7 License, Commercial NIST
Traceable Calibration with Certificate, 3-year Warranty
13 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch
­LabMaster Master Acquisition Module with
15.3" WXGA Color Display.
50 Ω and 1 MΩ Input
LabMaster 913MZi-A
16 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch
­LabMaster Master Acquisition Module
with 15.3" WXGA Color Display.
50 Ω and 1 MΩ Input
LabMaster 916MZi-A
Included with LabMaster 9xxSZi-A Standard Configuration
20 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch
­LabMaster Master Acquisition Module
with 15.3" WXGA Color Display.
50 Ω and 1 MΩ Input
LabMaster 920MZi-A
ProLink to K/2.92 mm Adapter: 4 each LPA-K-A, PCIe x 8 cable, 2m
long, PCIe x 4 cable, 2m long, Power Cable for the Destination Country,
ChannelSync 10 GHz clock cable, 2m long, Commercial NIST Traceable
Calibration with Certificate, 3-year Warranty
30 GHz, 80 GS/s, 2 Ch, 40 Mpts/Ch
LabMaster Master Acquisition Module
(20 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch) with
15.3" WXGA Color Display.
50 Ω and 1 MΩ Input
LabMaster 930MZi-A
45 GHz, 120 GS/s, 1 Ch, 60 Mpts/Ch
LabMaster Master Acquisition Module
(30 GHz, 80 GS/s, 2 Ch, 40 Mpts/Ch;
20 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch)
with 15.3" WXGA Color Display.
50 Ω and 1 MΩ Input
LabMaster 945MZi-A
ChannelSync Expansion Products
ChannelSync Mainframe Hub to permit
LabMaster expansion to up to 20 acquisition
modules
Expansion ChannelSync module card
for ChannelSync Mainframe Hub.
One required per connected
acquisition module
LabMaster CMH20-Zi
LabMaster CMH-1ACQMODULE-Zi
Memory Options
LabMaster 9 Zi-A Series Acquisition Modules
13 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch
­LabMaster Acquisition Module
with 50 Ω input
LabMaster 913SZi-A
16 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch
­LabMaster Acquisition Module
with 50 Ω input
LabMaster 916SZi-A
20 GHz, 40 GS/s, 4 Ch,
20 Mpts/Ch L
­ abMaster Acquisition Module
with 50 Ω input
LabMaster 920SZi-A
30 GHz, 80 GS/s, 2 Ch, 40 Mpts/Ch
LabMaster Acquisition Module
with 50 Ω input
(20 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch)
LabMaster 930SZi-A
45 GHz, 120 GS/s, 1 Ch, 60 Mpts/Ch
LabMaster Acquisition Module
with 50 Ω input
(30 GHz, 80 GS/s, 2 Ch, 40 Mpts/Ch;
20 GHz, 40 GS/s, 4 Ch, 20 Mpts/Ch)
Labmaster 945SZi-A
20 Mpts/Ch Standard Memory for LabMaster
Acquisition Module
LM9Zi-STD
32 Mpts/Ch Standard Memory for LabMaster
Acquisition Module. Used with SDA MCM-Zi
SDA9Zi-STD
32 Mpts/Ch Standard Memory for LabMaster
Acquisition Modules. Used with DDA MCM-Zi
DDA9Zi-STD
32 Mpts/ch Memory Option for LabMaster
Acquisition Module
LM9Zi-S-32
64 Mpts/Ch Memory Option for LabMaster
Acquisition Modules
LM9Zi-M-64
64 Mpts/Ch Memory Option for LabMaster
Acquisition Modules. Used with SDA MCM-Zi
SDA9Zi-M-64
64 Mpts/Ch Memory Option for LabMaster
Acquisition Modules. Used with DDA MCM-Zi
DDA9Zi-M-64
128 Mpts/Ch Memory Option for LabMaster
Acquisition Modules
LM9Zi-L-128
128 Mpts/Ch Memory Option for LabMaster
Acquisition Modules. Used with SDA MCM-Zi
SDA9Zi-L-128
128 Mpts/Ch Memory Option for LabMaster
Acquisition Modules Used with DDA MCM-Zi
DDA9Zi-L-128
256 Mpts/Ch Memory Option for LabMaster
Acquisition Modules
LM9Zi-L-256
256 Mpts/Ch Memory Option for LabMaster
Acquisition Modules. Used with SDA MCM-Zi
SDA9Zi-L-256
256 Mpts/Ch Memory Option for LabMaster
Acquisition Modules. Used with DDA MCM-Zi
DDA9Zi-L-256
33
ordering informAtion
Product Description
Product Code
Sampling Rate Options
Product Code
Serial Data Compliance
80 GS/s on 2 Ch Sampling Rate Option (not available
for 930xZi-A or 945xZi-A) Includes two separate
external interleaving devices with storage case
WM8Zi-2X80GS
SDAIII Serial Data Analysis Option
LM9Zi-SDAIII
QPHY-10GBase-KR
QualiPHY Enabled 10GBase-KR Software Option
QPHY-BroadR-Reach
QualiPHY Enabled BroadR-Reach Software Option
QPHY-LPDDR2
CPU, Computer and Other Hardware Options
for LabMaster MCM-Zi Master Control Module
QualiPHY Enabled LPDDR2 Software Option
QualiPHY Enabled DDR2 Software Option
QPHY-DDR2
Additional 500 GB Hard Drive for MCM-Zi
QualiPHY Enabled DDR3 Software Option
QPHY-DDR3
MCM-Zi-500GB-RHD-02
48 GB RAM Upgrade for MCM-Zi
MCM-Zi-24-UPG-48GBRAM
QualiPHY Enabled DisplayPort Software Option
96 GB RAM Upgrade for MCM-Zi
MCM-Zi-24-UPG-96GBRAM
QualiPHY Enabled Ethernet 10/100/1000BT Software Option
192 GB RAM Upgrade for MCM-Zi
MCM-Zi-24-UPG-192GBRAM
GPIB Option for MCM-Zi
GPIB-3
QPHY-DisplayPort
QPHY-ENET*
QPHY-HDMI†
QualiPHY Enabled HDMI Software Option
QPHY-MIPI-DPHY
QualiPHY Enabled MIPI D-PHY Software Option
CPU, Computer and Other Hardware Options for
LabMaster 9xxMZi-A Master Acquisition Modules
QualiPHY Enabled MOST50 ePHY Software Option
QPHY-MOST50
QualiPHY Enabled MOST150 oPHY Software Option
QPHY-MOST150
Additional 500 GB Hard Drive for LM9xxMZi-A
QualiPHY Enabled PCIe 3.0 Software Option
LM9Zi-500GB-RHD-02
48 GB RAM Upgrade for LM9xxMZi-A
LM9Zi-24-UPG-48GBRAM
QualiPHY Enabled PCIe Gen1 Software Option
96 GB RAM Upgrade for LM9xxMZi-A
LM9Zi-24-UPG-96GBRAM
QualiPHY Enabled SATA Software Option
192 GB RAM Upgrade for LM9xxMZi-A
LM9Zi-24-UPG-192GBRAM
QualiPHY Enabled SAS-2 Software Option
GPIB Option for LabMaster MCM-Zi
GPIB-3
CPU Video Card to support
LM9Zi-VIDEOCARD-ZI-EXTDISP-15
Zi-EXTDISP-15 2nd Touch
Screen Display
CPU Video Card to support
Extended Desktop (replaces
standard video card)
LM9Zi-VIDEOCARD-EXTDESKTOP
Bundle - Multi-Lane SDA LinQ
LM9Zi-SDAIII-CompleteLinQ
Framework, including Eye, Jitter, Noise,
SDA9Zi-CompleteLinQ
Crosstalk Measurements, with EyeDrII
DDA9Zi-CompleteLinQ
and VirtualProbe
Multi-Lane Serial Data Analysis
LM9Zi-SDAIII-CrossLinQ
SDA9Zi-CrossLinQ
LinQ Framework, Eye, Jitter, Noise
DDA9Zi-CrossLinQ
and Crosstalk Measurements
Multi-Lane Serial Data Analysis LinQ
LM9Zi-SDAIII-LinQ
SDA9Zi-LinQ
Framework, Eye and Jitter Measurements
DDA9Zi-LinQ
Single-Lane Serial Data Analysis
LM9Zi-SDAIII-Crosstalk
SDA9Zi-Crosstalk
Framework, Eye, Jitter, Noise and
DDA9Zi-Crosstalk
Crosstalk Measurements
Single-Lane Serial Data Analysis Framework,
Eye and Jitter Measurements
LM9Zi-SDAIII
Signal Integrity Toolkits
Advanced De-embedding, Emulation and
Virtual Probing Toolkit
Signal Integrity Toolkit - Channel & Fixture
De-embedding/Emulation, Tx/Rx Equalization
Bundle - EyeDrII and VirtualProbe Toolkits
Cable De-embed Option
QPHY-PCIe3
QPHY-PCIe
QPHY-SATA-TSG-RSG
QPHY-SAS2
QPHY-SFI
QPHY-USB‡
QPHY-USB3-Tx-Rx
QualiPHY Enabled SFI Software Option
QualiPHY Enabled USB 2.0 Software Option
QualiPHY Enabled SuperSpeed USB Transmitter/
­Receiver Compliance Software Option
* TF-ENET-B required. † TF-HDMI-3.3V-QUADPAK required. ‡ TF-USB-B required.
PCI Express, SuperSpeed USB (USB 3.0) and SATA Complete Hardware/Software
Test Solutions are available. Consult Factory.
Serial Data Test Fixtures
Serial Data and Crosstalk Analysis
34
Product Description
LM9Zi-VIRTUALPROBE
LM9Zi-EYEDRII
LM9Zi-EYEDRII-VP
LM9Zi-CBL-DE-EMBED
TF-ENET-B*
10/100/1000Base-T Ethernet Test Fixture
Telecom Adapter Kit 100 Ω Bal., 120 Ω Bal., 75 Ω Unbal.
HDMI 50Ω Pull-Up Terminator
HDMI Pull-Up Terminator Quad Pack SATA 1.5 Gb/s, 3.0 Gb/s and 6.0 Gb/s
Compliance Test Fixture
SATA 1.5 Gb/s, 3.0 Gb/s and 6.0 Gb/s
Compliance Test Fixture Measure Kit
USB 2.0 Compliance Test Fixture
SuperSpeed USB Compliance Test Fixture
2 x BNC to SMA Adapter
2 x 18 inch SMA to SMA Cable
2 x 36 inch SMA to SMA Cable
100 ps Rise Time Filter
150 ps Rise Time Filter
20 dB SMA Attenuators
TF-ET
TF-HDMI-3.3V
TF-HDMI-3.3V-QUADPAK
TF-SATA-C
TF-SATA-C-KIT
TF-USB-B
TF-USB3
ENET-2ADA-BNCSMA
ENET-2CAB-SMA018
ENET-2CAB-SMA036
RISE-TIME-FILTER-100PS
RISE-TIME-FILTER-150PS
20DB-SMA-ATTENUATOR
*Includes ENET-2CAB-SMA018 and ENET-2ADA-BNCSMA
Serial Data Triggers and Decoders
600 Mb/s to 6.5 Gb/s High-speed 80bit NRZ
and 8b/10b Symbol Serial Pattern Trigger
Also includes 8b/10b Decode. Available for
use with LabMaster 9xxMZi-A Master
Acquisition Modules only.
600 Mb/s to 14.1 Gb/s 80-bit NRZ
and 8b/10b Serial Trigger. Also includes
8b/10b Decode. Available for use with
LabMaster 9xxMZi-A Master Acquisition
Modules only.
64b/66b Decode Annotation Option
8b/10b Decode Decode Annotation Option
LM9Zi-6GBIT-80B-8B10B-TD
LM9Zi-14GBIT-80B-8B10B-TD
LM9Zi-64b66b D
LM9Zi-8B10B D
ordering informAtion
Product Description
Product Code
Serial Data Triggers and Decoders (cont’d)
ENET Decode Option
Ethernet 10G Decode Option
PCI Express Decode Annotation Option
USB 3.0 Decode Annotation Option
USB 2.0 Decode Annotation Option
USB2-HSIC Decode Option
SATA Decode Annotation Option
SAS Decode Annotation Option
Fibre Channel Decode Annotation Option
D-PHY Decode Option
DigRF 3G Decode Option
DigRF v4 Decode Option
Audiobus Trigger and Decode Option
for I2S, LJ, RJ, and TDM
Audiobus Trigger, Decode, and Graph Option
for I2S, LJ, RJ, and TDM
LM9ZiAudiobus TDG
LM9Zi-Manchesterbus D
MIPI D-PHY Decode Annotation Option
LM9Zi-DPHYbus D
MIPI D-PHY Decode and Physical Layer Test Option
LM9Zi-DPHYbus DP
MIPI M-PHY Decode Annotation Option
LM9Zi-MPHYbus D
MIPI M-PHY Decode Annotation and Physical Layer
LM9Zi-MPHYbus DP
LM9Zi-I2Cbus TD
LM9Zi-SENTbus D
LM9Zi-SPIbus TD
LM9Zi-LINbus TD
LM9Zi-UART-RS232bus TD
SENT Decode Option
SPI Bus Trigger and Decode Option
LIN Trigger and Decode Option
UART and RS-232 Trigger and Decode Option
LM9Zi-FlexRaybus TD
LM9Zi-FlexRaybus TDP
FlexRay Trigger and Decode Option
FlexRay Trigger, Decode, and
Physical Layer Test Option
CANbus TD Trigger and Decode Option
CANbus TDM Trigger, Decode and
Measure/Graph Option
MIL-STD-1553 Trigger and Decode Option
ARINC 429 Symbolic Decode Option
PROTObus MAG Serial Debug Toolkit
Product Code
General Purpose and Application Specific Software Options
LM9Zi-ENETbus D
LM9Zi-ENET10Gbus D
LM9Zi-PCIEbus D
LM9Zi-USB3bus D
LM9Zi-USB2bus D
LM9Zi-USB2-HSICbus D
LM9Zi-SATAbus D
LM9Zi-SASbus D
LM9Zi-FCbus D
LM9Zi-DPHYbus D
LM9Zi-DigRF3Gbus D
LM9Zi-DIGRFv4bus D
LM9Zi-Audiobus TD
Manchester Decode Option
Test Option
I2C Bus Trigger and Decode Option
Product Description
LM9Zi-CANbus TD
LM9Zi-CANbus TDM
Spectrum Analysis Option
LM9Zi-SPECTRUM
Digital Filter Software Package
LM9Zi-DFP2
Serial Data Mask Software Package
LM9Zi-SDM
Disk Drive Measurements Software Package
LM9Zi-DDM2
Disk Drive Analyzer Software Package
LM9Zi-DDA
Advanced Optical Recording
LM9Zi-AORM
Measurement Package
Electrical Telecom Mask Test Software Package
LM9Zi-ET-PMT
EMC Pulse Parameter Software Package
LM9Zi-EMC
Power Analysis Option
LM9Zi-PWR
Clock Jitter Analysis with Four Views Software Package
LM9Zi-JITKIT
High Speed Output Accessories
High-speed PCIe Gen 1 x4
Digitizer Output
PCI Express x1 Express
Card Host ­Interface for Laptop
­Express Card Slot
PCI Express x1 Host
Interface Board for Desktop PC
LSIB-2
LSIB-HOSTCARD
LSIB-HOSTBOARD
PCI Express x4 3-meter Cable with
x4 Cable Connectors ­Included
LSIB-CABLE-3M
PCI Express x4 7-meter Cable
with x4 Cable Connectors ­Included
LSIB-CABLE-7M
Miscellaneous
LabMaster Oscilloscope Cart
OC-910
Master Acquisition Module +
LM9Zi-MASTER+CPU-RACKMOUNT
CPU Rackmount Kit
MCM-Zi Rackmount Kit
MCM-Zi-RACKMOUNT
LabMaster MCM-Zi Softcase
MCM-Zi-SOFTCASE
LabMaster 9xxSZi-A or CPU Module
LM9Zi-SLAVE-CPU-SOFTCASE
Softcase
LM9Zi-1553 TD
LM9Zi-ARINC429bus DSymbolic
LM9Zi-PROTObus MAG
LM9Zi-ProtoSync
Decode Annotation and Protocol Analyzer
­Synchronization Software Option
Decode Annotation and Protocol Analyzer
+ BitTracer Synchronization Software Option
LM9Zi-ProtoSync-BT
Mixed Signal Solutions
250 MHz, 1 GS/s, 18 Ch,
10 Mpts/Ch Mixed Signal O
­ scilloscope Option
MS-250
500 MHz, 2 GS/s, 18 Ch,
50 Mpts/Ch Mixed Signal O
­ scilloscope Option
MS-500
250 MHz, 1 GS/s, 36 Ch, 25 Mpts/Ch (500 MHz,
18 Ch, 2 GS/s, 50 Mpts/Ch I­nterleaved) Mixed Signal
­Oscilloscope Option
MS-500-36
35
ordering informAtion
Product Description
Product Code
Probes and Probe Accessories
1.5 GHz, 0.9 pF, 1 MΩ High Impedance Active Probe
ZS1500
2.5 GHz, 0.9 pF, 1 MΩ High Impedance Active Probe
ZS2500
200 MHz, 3.5 pF, 1 MΩ Active Differential Probe
ZD200
500 MHz, 1.0 pF, Active Differential Probe
ZD500
ZD1000
1 GHz, 1.0 pF, Active Differential Probe
1.5 GHz, 1.0 pF, Active Differential Probe
ZD1500
WaveLink 4 GHz, 2.5 Vp-p Differential Probe System
D410-PS
WaveLink 4 GHz, 5 Vp-p Differential Probe System
D420-PS
WaveLink 6 GHz, 2.5 Vp-p Differential Probe System
D610-PS
WaveLink 6 GHz, 5 Vp-p Differential Probe System
D620-PS
WaveLink 8 GHz 3.5Vp-p Differential Probe System
D830-PS
WaveLink 10 GHz 3.5Vp-p Differential Probe System
D1030-PS
D1330-PS
WaveLink 13 GHz 3.5Vp-p Differential Probe System
WaveLink 13 GHz, 2.0 Vp-p Differential Probe System
D1305-A-PS
WaveLink 16 GHz, 2.0 Vp-p Differential Probe System
D1605-A-PS
WaveLink 20 GHz, 2.0Vp-p Differential Probe System
D2005-A-PS
WaveLink 25 GHz, 2.0 Vp-p Differential Probe System
D2505-A-PS
WaveLink 6 GHz Differential Amplifier Module
with Adjustable Tip
D600A-AT*
WaveLink 3GHz Differential Amplifier Module
with Adjustable Tip
D300A-AT†
WaveLink ProLink Platform/Cable Assembly (4 – 6 GHz)
WL-PLink-CASE
WaveLink ProBus Platform/Cable Assembly (4 GHz)
WL-PBus-CASE
SMA/SMP Lead Set for Dxx30 Probes
Dxx30-SMA-SMP Leads
OE695G
Optical-to-Electrical Converter,
DC to 9.5 GHz, 785 to 1550 nm
7.5 GHz Low Capacitance Passive Probe (÷10, 1 kΩ; ÷20, 500 Ω)
PP066
* For a complete probe, order a WL-PLink-CASE Platform/Cable Assembly
with the Adjustable Tip Module.
† For a complete probe, order a WL-PBUS-CASE Platform/Cable Assembly
with the Adjustable Tip Module
A variety of other active voltage and current probes are also available.
Consult Teledyne LeCroy for more information.
Customer Service
Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to
ensure high reliability. In the unlikely event you experience difficulties, our digital
oscilloscopes are fully warranted for three years and our probes are warranted for
one year.
This warranty includes:
• No charge for return shipping
• Long-term 7-year support
• Upgrade to latest software at no charge
1-800-5-LeCroy
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
© 2010 by Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
PCI Express® is a registered trademark and/or service mark of PCI-SIG.
MATLAB® is a registered trademark of The MathWorks, Inc. All other product or brand names are trademarks or requested trademarks
of their respective holders.
labmaster9zi-a-ds-12jul13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement