Belkin | F4U047-RS | USB 2.0 Ethernet Adapter

USB 2.0 Ethernet Adapter
User Manual
8820-00931F4U047
Safety Instructions
• Keep this User Manual for future reference
• Keep equipment away from humidity
• If any of the below scenarios arise, be sure to get
your equipment checked by a service technician:
• The adapter has been exposed to moisture
• The adapter has been dropped and damaged
• The adapter has obvious signs of breakage
•T
he adapter has not been working correctly
or you cannot get it to work according to
the instructions listed in the User Manual
USB 2.0 Ethernet Adapter
Table of Contents
Table of Contents
sections
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features . . . . . . . . . . . . . . . . . . . . . .
Package Contents . . . . . . . . . . . . . . . . .
System Requirements . . . . . . . . . . . . . . .
LED Status . . . . . . . . . . . . . . . . . . . . .
2
1
2
2
2
2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Windows 2000/XPWindows Vista/Windows 7 . . 3
Mac OS X v10 x . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Regulatory Compliance . . . . . . . . . . . . . . . . . . 13
FCC Conditions . . . . . . . . . . . . . . . . . . 13
CE . . . . . . . . . . . . . . . . . . . . . . . . . 13
WEEE Information . . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . 14
USB 2.0 Ethernet Adapter
3
4
Introduction
Table of Contents
sections
1
2
3
4
The Belkin USB 2.0 Ethernet Adapter allows your computer to instantly connect to a 10/100Mbps network through a USB port. It is also
an ideal USB-to-LAN alternative for gaming consoles that need network access in an environment lacking wireless capability.
USB 2.0 Ethernet Adapter
1
Introduction
Table of Contents
sections
1
2
3
Features
System Requirements
• Features
• Compliant with USB 2.0 specification
• Compliant with IEEE 802.3 (10Base-T) and
802.3u (100Base-Tx) standards
• Supports both full-duplex and half-duplex operations
• Supports suspend mode and remote wakeup via link-up and
magic packet
• Powered by USB port only
• Equipped with diagnostic LEDs
• Plug-and-play installation
• IBM compatible Pentium® 233MHz or faster PC or
Mac® computer
• 64MB RAM or more
• One available USB port
• Windows® 2000, XP, Windows Vista®, Windows 7
• Mac OS® X v10.x
LED Status
LED
Color
Description
Power
Green
On for connections to a 100Mbps network
Off for connection to a 10Mbps network
or not connected
Link
Yellow
LAN activity; blinking when there is data flow
between LAN and the host computer
Package Contents
• Belkin USB 2.0 Ethernet Adapter
• CD (Driver and User Manual)
• Quick Installation Guide
USB 2.0 Ethernet Adapter
2
4
Installation
Table of Contents
sections
1
2
3
4
Windows 2000/XP/Windows Vista/Windows 7
Do not connect the adapter to your computer before you install
the provided driver.
Note: Installation steps may differ slightly different based on the
version of your operating system.
1. Insert CD into your disk drive
2. Double-click on “My Computer”
3. Double-click on “Driver (D:)”
USB 2.0 Ethernet Adapter
3
Installation
Table of Contents
sections
1
2
4. Double-click on the file “Setup”
USB 2.0 Ethernet Adapter
4
3
4
Installation
Table of Contents
sections
1
2
5. In order to begin installation, click on “Next”
USB 2.0 Ethernet Adapter
6. Click “Install”
5
3
4
Installation
Table of Contents
sections
1
2
3
4
8. Plug in your Belkin USB 2.0 Ethernet Adapter and connect your
Ethernet cable (not included)
7. Click “Finish”
Note: You may be prompted to restart your computer in order to
complete installation.
USB 2.0 Ethernet Adapter
6
Installation
Table of Contents
sections
1
2
MAC OS X v10.x
1. Insert the provided driver CD into your CD drive
2. Double-click the CD on your desktop
3. Double-click on the “Mac” folder
USB 2.0 Ethernet Adapter
7
3
4
Installation
Table of Contents
sections
1
2
4. Select your Mac OS version
USB 2.0 Ethernet Adapter
3
5. In the directory of Mac 10.x, double-click “AX88772_10.x” to
execute the installer program
8
4
Installation
Table of Contents
sections
1
2
6. Click “Continue”
USB 2.0 Ethernet Adapter
3
4
7. Select the destination volume to install driver software and click
on “Continue”
9
Installation
Table of Contents
sections
1
2
9. Click “Continue Installation”
8. Click “Install”
USB 2.0 Ethernet Adapter
10
3
4
Installation
Table of Contents
sections
1
2
3
4
11. Plug in your Belkin USB 2.0 Ethernet Adapter and connect your
Ethernet cable (not included)
10. Click “Restart”
USB 2.0 Ethernet Adapter
11
SPECIFICATIONS
Table of Contents
sections
1
2
ItemsDescription
Network Standards
IEEE 802.3: 10Base-T
IEEE 802.3u: 100Base-T
Data Transfer Rates
Ethernet: 10Mbps (Half/Full Duplex)
Fast Ethernet: 100Mbps (Half/Full Duplex)
Data Bus
USB 2.0 (1.1-compliant)
LED Indicators
Power, Link
Power Consumption
850mW
Power Management
Suspend mode, hibernation mode
Network Interface
Female RJ45 jack
RAM
Embedded 20KB SRAM for
RX packet buffering and 20KB SRAM
for TX packet buffering
Operating System Support Windows 2000, XP, Windows Vista, 7
Mac OS X v10.3 or newer
Dimensions
66 x 22 x 15mm (L x W x H)
Weight
25g
Operating Temperature
0° C to 70° C
Note: Specifications are subject to change without further notice.
USB 2.0 Ethernet Adapter
12
3
4
REGULATORY COMPLIANCE
Table of Contents
sections
1
2
3
FCC Conditions
WEEE Information
This equipment has been tested and found to comply with
Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
According to the WEEE (Waste Electrical and Electronic
Equipment) Directive, do not dispose of this product as
household waste or commercial waste. Waste electrical and
electronic equipment should be appropriately collected and
recycled as required by practices established for your country.
For information on recycling of this product, please contact your
local authorities, your household waste disposal service, or the
shop where you purchased the product.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
CE Declaration of Conformity
This equipment is in compliance with the
requirements of the following regulations:
EN 55 022: CLASS B
USB 2.0 Ethernet Adapter
13
4
regulatory compliance
Table of Contents
sections
1
Belkin International, Inc., Limited 1-Year Product
Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original
purchaser of this Belkin product that the product shall be free of
defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for one year.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product).
Belkin reserves the right to discontinue any of its products
without notice, and disclaims any limited warranty to repair or
replace any such discontinued products. In the event that Belkin
is unable to repair or replace the product (for example, because it
has been discontinued), Belkin will offer either a refund or a credit
toward the purchase of another product from Belkin.com in an
amount equal to the purchase price of the product as evidenced
on the original purchase receipt as discounted by its natural use.
USB 2.0 Ethernet Adapter
2
3
4
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the
sole expense of the purchaser, or if Belkin determines that the
Belkin product has been improperly installed, altered in any way,
or tampered with. The Belkin Product Warranty does not protect
against acts of God such as flood, lightning, earthquake, war,
vandalism, theft, normal-use wear and tear, erosion, depletion,
obsolescence, abuse, damage due to low voltage disturbances
(i.e. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
14
regulatory compliance
Table of Contents
sections
1
How to get service.
To get service for your Belkin product you must take the
following steps:
1. Contact Belkin International, Inc., at 12045 Waterfront Drive,
Los Angeles, CA 90094, Attn: Customer Service, or call (800)223-5546, within 15 days of the Occurrence. Be prepared to
provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then
instruct you on how to forward your receipt and Belkin
product and how to proceed with your claim.
USB 2.0 Ethernet Adapter
2
3
Belkin reserves the right to review the damaged Belkin product.
All costs of shipping the Belkin product to Belkin for inspection
shall be borne solely by the purchaser. If Belkin determines,
in its sole discretion, that it is impractical to ship the damaged
equipment to Belkin, Belkin may designate, in its sole discretion,
an equipment repair facility to inspect and estimate the cost
to repair such equipment. The cost, if any, of shipping the
equipment to and from such repair facility and of such estimate
shall be borne solely by the purchaser. Damaged equipment
must remain available for inspection until the claim is finalized.
Whenever claims are settled, Belkin reserves the right to be
subrogated under any existing insurance policies the purchaser
may have.
15
4
regulatory compliance
Table of Contents
sections
1
2
How state law relates to the warranty.
This warranty gives you specific legal rights, and you may also
have other rights, which may vary from state to state. Some
states do not allow the exclusion or limitation of incidental,
consequential, or other damages, so the above limitations may
not apply to you.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF
BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING
THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE
DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS
OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY
BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
USB 2.0 Ethernet Adapter
3
16
4
Technical Support
US
http://www.belkin.com/support
Singapore
1800 622 1130
UK
http://www.belkin.com/uk/support
Europe
http://www.belkin.com/uk/support
Australia
http://www.belkin.com/au/support
New Zealand
http://www.belkin.com/au/support
© 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers
listed. Mac OS and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. Windows and Windows
Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Download PDF