Renesas | DP-64S | DP 64S-Pin - Renesas Electronics

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
8
H8/300L Series User System Interface Cable
For H8/300L Series Low-Cost Emulator
Microcomputer Development Environment System
2003.4
www.rss.renesas.com
H8/300L Series User System Interface Cable
DP 64S-Pin
(SD01AC3802D64S)
H8/3802 series
ALE300L-H8/3800 Emulator
H8/300L Series User System Interface Cable
User’s Manual
Published by
Date
: Renesas System Solutions Asia Pte. Ltd.
: April 1st, 2003, Version 1.0
Copyright (C) Renesas System Solutions Asia Pte. Ltd. All rights reserved.
Trademarks
(a)
General
All brand or product names used in this manual are trademarks or registered trademarks of their respective
companies or organizations.
IMPORTANT INFORMATION
•
READ this user’s manual before using this emulator product.
•
KEEP the user’s manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
Emulator Product:
Throughout this document, the term ‘emulator product’ shall be defined as the following products
produced only by Renesas System Solutions Asia Pte. Ltd.:
•
•
•
•
Emulation system (SD00ALE3800)
User system interface cable (SD00AC3802F64E)
User system interface cable (SD00AC3802F64A)
User system interface cable (SD01AC3802D64S)
The user system or a host computer is not included in this definition.
Purpose of the User System Interface Cable:
This user system interface cable is for connection between the emulator station and the user system. This
user system interface cable must only be used for the above purpose.
Improvement Policy:
Renesas System Solutions Asia Pte. Ltd. (hereafter collectively referred to as Renesas) pursues a policy of
continuing improvement in design, performance, and safety of the emulator product. Renesas reserves
the right to change, wholly or partially, the specifications, design, user’s manual, and other
documentation at any time without notice.
Target User of the Emulator Product:
Those who have carefully read and thoroughly understood the information and restrictions contained in
the user’s manual should only use this emulator product. Do not attempt to use the emulator product
until you fully understand its mechanism.
It is highly recommended that users that are well versed in the operation of emulator product instruct
first-time users.
LIMITED WARRANTY
Renesas warrants its emulator products to be manufactured in accordance with
published specifications and free from defects in material and/or workmanship.
Renesas, at its option, will repair or replace any emulator products returned intact to the
factory, transportation charges prepaid, which Renesas, upon inspection, shall determine
to be defective in material and/or workmanship. The foregoing shall constitute the sole
remedy for any breach of Renesas warranty. This warranty extends only to you, the
original Purchaser. It is not transferable to anyone who subsequently purchases the
emulator product from you. Renesas is not liable for any claim made by a third party or
made by you for a third party.
DISCLAIMER
RENESAS MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLED, ORAL
OR WRITTEN, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT
LIMITATION THEREOF, WARRANTIES AS TO MARKETABILITY,
MECRCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE,
OR AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT SHALL
RENESAS
BE
LIABLE
FOR
ANY
DIRECT,
INCIDENTAL
OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE EMULATOR PRODUCT, THE USE OF
ANY EMULATOR PRODUCT OR ITS DOCUMENTATION, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS EXPRESSLY STATED
OTHERWISE IN THIS WARRANTY, THIS EMULATOR PRODUCT IS SOLD
“AS IS”. AND YOU MUST ASSUME ALL RISK FOR THE USE AND RESULTS
OBTAINED FROM THE EMULATOR PRODUCT.
State Law:
Some states do not allow the exclusion or limitation of implied warranty or liability for incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may have other rights which may varies from state to state.
The Warranty is Void in the Following Cases:
Renesas shall have no liability or legal responsibility for any problems caused by misuse, abuse,
misapplication, neglect, improper handling, installation, repair or modifications of the emulator product
without Renesas’s prior written consent or any problems caused by the user system.
All Right Reserved:
This user’s manual and emulator product are copyrighted and Renesas reserves all rights. No part of this
user’s manual, all or part, any be reproduced or duplicated in any form, in hardcopy or machinereadable form, by any means available without Renesas ‘s prior written consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics and
performance of Renesas Technology‘s semiconductor products. Renesas assumes no responsibility
for any intellectual property claims or other problems that may result from applications based on the
examples described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third party
or Renesas.
3. MEDICAL APPLICATIONS: Renesas Technology’s products are not authorized for use in
MEDICAL APPLICATIONS without the written consent of the appropriate officer of Renesas
Technology (Asia Sales company). Such use includes, but is not limited to, use in life support
systems. Buyers of Renesas Technology’s products are requested to notify the relevant Renesas
Technology (Asia Sales offices) when planning to use the products in MEDICAL APPLICATIONS.
Figures:
Some figures in this user’s manual may show items different from your actual system.
Limited Anticipation of Danger:
Renesas cannot anticipate every possible circumstance that might involve a potential hazard. The
warnings in this user’s manual and on the emulator product are therefore not all inclusive. Therefore,
you must use the emulator product safely at your own risk.
! WARNING
Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and
will damage the user system and the emulator product or will result in PERSONAL
INJURY. The USER PROGRAM will be LOST.
•
Always switch OFF the emulator product and the user system before connecting or
disconnecting any cables, the user system interface cable connector, and the user system
IC socket.
•
When connecting the user system interface cable connector to the user system IC socket,
ensure that those pin 1 on both sides are correctly aligned.
Table of Contents
SECTION 1. INTRODUCTION .......................................................................................................................1-1
1.1
1.2
1.3
1.4
GENERAL DESCRIPTION...............................................................................................................................1-1
IC SOCKET TYPE ...........................................................................................................................................1-1
CONFIGURATION .........................................................................................................................................1-1
COMPONENTS ..............................................................................................................................................1-2
SECTION 2. CONNECTION PROCEDURES ...............................................................................................2-1
2.1 CONNECTING USER SYSTEM INTERFACE CABLE TO ALE300L EMULATOR ............................................2-1
2.2 CONNECTING USER SYSTEM INTERFACE CABLE TO USER SYSTEM ..........................................................2-2
2.2.1
Soldering IC Socket .............................................................................................................................2-2
SECTION 3. DIMENSIONS FOR USER SYSTEM CABLE HEAD ...........................................................3-1
SECTION 4. INSTALLING MCU TO THE USER SYSTEM ......................................................................4-1
SECTION 5. WARNINGS .................................................................................................................................5-1
RENESAS TECHNOLOGY (ASIA SALES OFFICES)
List of Figures
Figure 1.1
Figure 2.1
Figure 2.2
Figure 3.1
Figure 3.2
Figure 3.3
SD01AC3802D64S user system interface cable............................................................. 1-1
Connect User System Interface Cable to ALE300L Emulator..................................... 2-1
Connecting user system interface cable to user system .............................................. 2-2
PCB footprint of DP-64S IC Socket................................................................................. 3-1
User system interface cable head.................................................................................... 3-1
Connecting user system interface cable to user system .............................................. 3-2
Section 1. Introduction
1.1
General description
The user system interface cable (SD01AC3802D64S) connects an 8-bit ALE Emulator (ALE300L-H8/3800)
to the IC socket for a DP 64S-pin package (Package code: DP-64S) for the H8/3802 series MCU on the
user system.
1.2
IC socket type
The IC socket used on the user system is manufactured by YAMAICHI ELECTRONICS Co., Ltd.). The
part number for the DP-64S pin package IC socket is given below:
•
•
1.3
IC83--64075-GG4 [Gold plated]
IC83-64075-GS4 [Tin plated]
Configuration
ALE300L Emulator set
Cable Head
Cable Head
Cable Body
User System
Figure 1.1
SD01AC3802D64S user system interface cable
1.
Align pin 1 of the IC socket of user cable header to IC socket on the user system.
2.
Connect the other ends of 2x60-ways connectors to the ALE300L emulator set.
1-1
1.4
No.
1
2
3
Components
Component
Cable body
Cable head
IC socket
Quantity
1
1
3
Remarks
Includes two flat cables
For DP 64-pin package (DP-64S)
1-2
Section 2. Connection Procedures
WARNING: Always switch OFF the user system and the emulator product before the USER
SYSTEM INTERFACE CABLE is connected to or removed from either of the boards. Before
connecting, make sure that pin 1 on both sides is correctly aligned. Failure to do so will result in
a FIRE HAZARD and will damage the user system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be lost.
2.1
Connecting User System Interface Cable to ALE300L Emulator
To connect the cable body to the emulator, follow the instructions below:
•
Make sure the user system and emulator are powered off.
•
Open the cover at the bottom of the emulator.
•
Align the connectors on the cable body with those on the emulator according to the specified
number. Insert the cable body connectors to those on the emulator until they are locked. Refer to
figure 2.1.
Figure 2.1
Connect User System Interface Cable to ALE300L Emulator
ALE300L Emulator set
Cable Head
Cable Head
Cable Body
User System
2-1
2.2
Connecting User System Interface Cable to User System
2.2.1 Soldering IC Socket
•
Align pin 1 on the IC socket with pin 1 on the user system interface cable head, and insert the user
system interface cable head into the IC socket on the user system as shown in figure 2.2.
•
Ensure that the user system interface cable is tightly inserted to the IC socket on the user system. Use
special cares to prevent the leads from accidentally twisted during insertion.
Figure 2.2
Connecting user system interface cable to user system
Cable Head
Pin 1
User System
IC Socket
2-2
Section 3. Dimensions for User System Cable Head
The dimensions for the recommended mount pad(footprint) for the user system shown in figure 3.1 for
the IC socket used on a DP-64S-pin package (manufactured by YAMAICHI ELECTRONICS Co., Ltd.)
57.70
1.778 X31 = 55.118
19.05
21.60
1.778 ± 0.05
Unit: mm
Dimension for YAMAICHI IC Socket IC83-64075-GG4 / IC83-64075-GS4
Figure 3.1
PCB footprint of DP-64S IC Socket
The dimensions for the user system interface cable head is shown in figure 3.2.
60.00
65.00
Unit: mm
Figure 3.2
User system interface cable head
3-1
Below shows the dimensions after connecting the User System Interface Cable to the user system.
IC socket (For Protection)
IC83-64075-GG4
manufactured by YAMAICHI Electronics Co., Ltd
15.60
Cable Head
12.00
User System
IC socket (For Protection)
IC83-64075-GG4
manufactured by YAMAICHI Electronics Co., Ltd
Figure 3.3
Connecting user system interface cable to user system
3-2
Section 4. Installing MCU to the User System
•
Check the location of pin 1 before inserting the MCU into the IC socket on the user system.
•
After inserting the MCU, ensure that the insertion is secured and the leads are properly inserted into
the IC socket.
4-1
Section 5. Warnings
•
Make sure that pin 1 on the IC socket is correctly aligned with pin 1 on the cable head before
inserting the cable head into the IC socket on the user system.
•
Do not apply excessive force to the user system interface cable while it is connected to the user
system.
•
This user system interface cable is specifically designed for the ALE300L-H8/3800 emulator set. Do
not use this cable with any other emulator set.
5-1
Renesas Technology (Asia Sales Offices)
URL: http://www.renesas.com
H8/300L Series User System Interface Cable
Download PDF