Samsung | SCHA950 | User guide | Samsung SCHA950 User guide

SCH-a950 Series
P O R T A B L E
A l l
D i g i t a l
M o b i l e
P h o n e
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
YI03.08_WC_091905_F5
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating there to (the “Phone
System”), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate
the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA),
L.P.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein St.
Richardson, TX 75082
Plano, TX 75074
Tel: 972.761.7000
Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.761.7001
Fax: 972.801.6065
Internet Address: http://www.samsungusa.com
©2005 Samsung Telecommunications America, L.P. is a
registered trademark of Samsung Electronics America, Inc. and
its related entities.
Licensed by Qualcomm Incorporated under one or more of the
following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
Printed in South Korea
GH68-06494A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
Section 1: Getting Started .................................. 9
Turning Your Phone On and Off ........................................ 10
Setting Up Voicemail ........................................................ 10
Understanding this User Manual ....................................... 11
Section 2: Understanding Your Phone ............. 13
Features of Your Phone .................................................... 14
Front View of Your Phone ................................................. 15
Command Keys ................................................................ 19
Understanding the Display Screen .................................... 21
Battery ............................................................................. 25
Removable Memory Card Storage .................................... 27
Phone Memory Storage .................................................... 28
Section 3: Call Functions .................................. 29
Making a Call ................................................................... 30
Answering a Call .............................................................. 30
Call History ....................................................................... 31
Roaming .......................................................................... 35
TTY .................................................................................. 36
VoiceSignal ...................................................................... 36
Voice Memos ................................................................... 45
Section 4: Menu Navigation ............................. 47
Menu Navigation .............................................................. 48
Menu Outline ................................................................... 50
Section 5: Entering Text ................................... 55
Changing the Text Entry Mode .......................................... 56
Using Word Mode ............................................................. 57
Entering Upper and Lower Case ....................................... 58
Entering Symbols ............................................................. 58
Entering Numbers ............................................................ 59
Table of Contents
5
Section 6: Understanding Your Contacts ......... 61
Table of Contents
Opening Contacts Menu ...................................................62
Adding a Contact ..............................................................63
Adding Pauses .................................................................65
Contact Groups .................................................................65
Finding a Contacts Entry ...................................................69
Editing an Existing Contact Entry ......................................69
Deleting a Contact Entry ...................................................70
Storing Numbers After a Call ............................................70
Speed Dialing ...................................................................71
My Name Card .................................................................73
Finding My Phone Number ...............................................73
Section 7: Messaging ....................................... 75
Types of Messages ...........................................................76
Retrieving New Messages ................................................76
Creating and Sending TXT Messages ................................77
Creating and Sending PIX/FLIX Messages .........................79
Receiving PIX/FLIX Messages ...........................................81
New Handwritten Messages .............................................83
Message Folders ..............................................................83
Changing Message Settings .............................................88
Voicemail .........................................................................90
E-Mail ..............................................................................90
Mobile IM .........................................................................91
Chat .................................................................................92
Section 8: Changing Your Settings .................. 93
My Account ......................................................................94
Tool Settings ....................................................................94
Sound Settings .................................................................95
Display Settings ...............................................................98
System Settings .............................................................103
Call Settings ...................................................................109
6
Table of Contents
Clock Format .................................................................. 113
Ringer ID ........................................................................ 114
Picture ID ....................................................................... 114
Bluetooth Settings .......................................................... 114
Section 9: Multimedia .................................... 119
Get It Now ...................................................................... 120
Get Tunes & Tones ......................................................... 121
Get PIX & FLIX ................................................................ 122
Get Fun & Games ........................................................... 131
Get News & Info ............................................................. 132
Get Going ....................................................................... 133
Section 10: Tools ............................................ 135
Calendar ........................................................................ 136
MP3 Player .................................................................... 138
Alarm Clock ................................................................... 141
World Clock .................................................................... 144
Notepad ......................................................................... 144
Calculator ...................................................................... 146
Section 11: Mobile Web .................................. 149
Mobile Web .................................................................... 150
Launching Mobile Web ................................................... 150
Exit Mobile Web ............................................................. 150
Navigate the Web ........................................................... 151
Mobile Web Soft Keys .................................................... 151
Links .............................................................................. 153
Place a Call While Using Mobile Web .............................. 153
Section 12: Health and Safety Information .... 155
Health and Safety Information ........................................ 156
Consumer Information on Wireless Phones ..................... 158
Road Safety ................................................................... 168
Operating Environment ................................................... 170
Using Your Phone Near Other Electronic Devices ............ 171
Table of Contents
7
Table of Contents
Potentially Explosive Environments .................................173
Emergency Calls .............................................................174
FCC Notice and Cautions ................................................175
Other Important Safety Information .................................176
Product Performance ......................................................177
Availability of Various Features/Ring Tones .....................178
Battery Standby and Talk Time .......................................179
Battery Precautions ........................................................179
Care and Maintenance ....................................................181
Section 13: Warranty Information .................. 183
Standard Limited Warranty .............................................184
Index ............................................................... 191
8
Section 1: Getting Started
Topics Covered
• Turning Your Phone On and Off
• Setting Up Voicemail
• Understanding this User Manual
Section 1: Getting Started
Section 1
This section allows you to start using your phone by
activating your service, setting up your voicemail,
contacting customer support, or getting an
understanding of how this manual is put together.
9
Turning Your Phone On and Off
Turning Your Phone On
1. Open the flip, then press
.
Note: As with any other radio-transmitting device, do not touch the internal
antenna as it affects call quality and may cause the phone to operate at a
higher power level than is necessary. The internal antenna is located along
the top on the back side of your phone.
Section 1
2. Your service provider’s name momentarily appears in the
display and the phone begins searching for a network
signal.
3. Once the phone finds a signal, the time, date, and day
appear in the display.
4. You’re now ready to place and receive calls.
If the phone is outside of the Verizon Wireless coverage or
roaming area, appears in the top of the display.
Turn Your Phone Off
Press and hold
powers off.
for two or more seconds. Your phone
Setting Up Voicemail
Voicemail allows callers to leave voice messages, which
can be retrieved any time.
Note: Once your voicemail account has been set up, you can use the
Voicemail selection 7 (under the Messaging menu) to view details of voice
messages in your voicemail box.
10
Understanding this User Manual
Voicemail Setup
1. In standby mode, press and hold the
Voicemail displays.
key. Calling
2. Press
again, then enter your own mobile number
and press
to dial voicemail.
3. Press
to interrupt the greeting.
4. Follow the prompts in the new user tutorial to setup your
mailbox.
Listen to Voicemail
2. You are then prompted to enter your password followed
by
.
Understanding this User Manual
The chapters of this manual generally follow the same
order as the menus and sub-menus in your phone. A
robust index for quick reference to most features begins
on page 191.
Also included is important safety information that you
should know before using your phone. Most of this
information is near the back of the guide, beginning on
page 155.
Notes and Tips
Throughout this guide are icons and text that are set apart
from the rest. These are intended to point out important
information, quick methods for activating features, to
Section 1: Getting Started
11
Section 1
1. In standby mode, press and hold
, or dial your own
mobile number and press
to dial voicemail.
define terms, and more. The definitions for these methods
are as follows:
• Notes: Explain alternative options within the current feature,
menu, or sub-menu.
• Tips: Provide quick or innovative methods for performing
functions related to the subject at hand.
• Important: Points out important information about the current
Section 1
feature that could affect performance, or even damage your
phone.
12
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Front View of Your Phone
• Command Keys
• Understanding the Display Screen
• Battery
• Removable Memory Card Storage
• Phone Memory Storage
Section 2: Understanding Your Phone
13
Section 2
This section outlines some key features of your phone. It
also displays the screen and the icons that are displayed
when the phone is in use.
Features of Your Phone
• Domestic and international voice and text messaging service
(available on participating networks).
• High speed data (CDMA 2000 1x Technology)
• EVDO 1x Technology
• Global Positioning (GPS) Technology
• PIM Functions
• MMS Messaging
• TXT Messaging
• PIX Messaging
• FLIX Messaging
• E-mail Messaging
• Instant Messaging
• 1.3 Mega Pixel Camera
Section 2
• Camcorder
• Voice Dial
• Speakerphone
• TransFlash TM Memory Card Slot
• Phone Memory Storage
• MP3 Player
• Bluetooth® Wireless Technology **
** The SCH-a950 supports the wireless headset profile and handsfree kit profile for
Bluetooth® wireless technology. The SCH-a950 does not support Bluetooth OBEX
profiles. Go to www.verizonwireless.com/bluetoothchart to check vehicle/accessory
compatibility.
14
Front View of Your Phone
Front View of Your Phone
The following illustrations show the main elements of
your phone:
Open View
Section 2
Section 2: Understanding Your Phone
15
Features
1. Earpiece: The earpiece allows you to hear the other
caller.
2. Display Screen Icons: Indicates the status of your phone,
including status icons, message indicators, signal
strength, etc.
3. Navigation Keys: This key allows you to scroll through
the phone menu options.
4. Left Soft Key Option: This key is used to navigate through
menus and applications by selecting the choice available
in the Left Soft key Option.
5. Send Key: Allows you to place or receive a call. In
standby mode, press the key once to access the recent
call log.
Section 2
6. Volume Key: Allows you to adjust the master volume in
standby mode (with the flip open) or adjust the voice
volume during a call. To mute the ringer during an
incoming call, press the volume key up or down. When
the flip is closed, press and hold the key, and sub LCD
displays.
7. Clear Key: Deletes characters from the display when you
are in text entry mode. Press to return to the previous
menu or screen when navigating features on your phone.
8. Headset Jack: Allows you to plug in an optional headset
for safe, convenient, hands-free conversations.
9. Special Function Keys: Enter’s special characters.
Performs various functions.
16
Front View of Your Phone
10. Power/Accessory Connector: The power/accessory
interface connector is used to plug in the charging
accessories and also connect any available accessory
cables to your phone.
11. Microphone: The Microphone allows the other caller to
hear you clearly when you are speaking to them.
12. Alpha-numeric Keys: Use these keys to enter numbers,
letters, and characters.
13. Speakerphone Key: Press this key to enable/disable the
speakerphone option.
14. End Key: Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to mute the ringer and send the call to
voicemail.
15. Center/OK Key: Pressing when navigating through a
menu accepts the highlighted choice in a menu.
Section 2: Understanding Your Phone
Section 2
16. Right Soft Key: This key is used to navigate through
menus and applications by selecting the choice
available in the Right Soft key Option.
17
Closed View
Features
Section 2
1. Camera Lens: The lens of your built-in camera/
camcorder.
2. Flash: The built-in flash has manual and automatic
capabilities.
3. External LCD Display: External LCD shows provider, time,
day, and date. It also displays incoming calls or
messages.
4. Jog Dial: Song selection key.
5. Rewind Key: Music rewind key.
6. Play/Pause Key: Play or pause toggle key.
7. Stop Key: Music stop key.
8. Fast Forward Key: Music fast forward key.
18
Command Keys
9. TransFlash Card Slot: This expansion slot allows you to
insert a TransFlash memory card to add additional
memory and storage capacity.
10. Camera/Camcorder Key: Launches the Camera/
Camcorder feature of your phone.
11. Service Light: Flashes when phone is powered on and
Service LED option is enabled in SETTINGS & TOOLS.
12. Speaker: Music, Ringtones, and Sounds are played
through the speaker.
Command Keys
Functions for the soft keys are defined by what appears
above each in the display. There are two soft keys, the left
soft key
and the right soft key .
Left Soft Key
Some functions of the left soft key are as follows.
to
open the Message menu.
• When the left soft key function is Settings, press the Settings
(left) soft key
to view settings for the feature.
• When the left soft key function is Edit, press the Edit (left) soft
key
to edit a Contact or Profile setting.
Section 2: Understanding Your Phone
19
Section 2
• In standby mode, press the Message (left) soft key
Right Soft Key
Some functions of the right soft key are as follows.
• When the right soft key function is Options, press the Options
(right) soft key
to view more options for the current menu.
• In standby mode, press the Contacts (right) soft key
to
open your Contacts list.
Clear Key
The CLR key
is used to erase or clear numbers, text, or
symbols from the display. You can also use
to return
to a previous menu or to return to standby mode from any
menu.
1. If you enter an incorrect character, briefly press
backspace (and delete) the character.
to
2. To erase the previous word in a sentence, press and hold
.
Section 2
3. To back up one menu level, briefly press
.
4. To return to standby mode from any menu, press and
hold
until you return to standby mode.
End Key
1. Press and hold the End key
off.
2. Briefly press
to turn your phone on or
once to disconnect a call.
3. Press
to return to standby mode from any menu, or
to cancel the last input.
20
Understanding the Display Screen
Send Key
The Send key
is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
1. Press
once to answer calls.
2. Enter a number and briefly press
to make a call.
3. Briefly press
in standby mode to display a list of
recent calls to and from your phone.
4. Press
twice in standby mode to call the most
recently dialed number.
5. Press
to pick up a waiting call. Press
switch back to the other call.
again to
Navigation Key
Use the directional keys on the navigation key to browse
menus, sub-menus, and lists. Each key also acts as a
shortcut to launch applications. The down navigation
key is user-definable.
Use the speakerphone key
to switch from using the
earpiece to the speakerphone before or during a call. Use
the volume keys (located on the left side of your phone)
adjust the volume. Press the speakerphone key to enable
and disable the speakerphone option.
Understanding the Display Screen
The top line of the display is reserved for icons that
indicate network status, battery power, signal strength,
and more. The following table lists some display icons
and their descriptions.
Section 2: Understanding Your Phone
21
Section 2
Speakerphone Key
Display icons
Signal Strength: Always appears when your phone is
on and indicates the current signal strength. More bars
indicate a stronger signal.
Roaming Indicator: Your phone is outside your home
area. While roaming, another wireless provider may be
handling your call. The service rate for the call may be
higher than those made from within your home area.
Please refer to Verizon Wireless for roaming rates.
Digital: Appears when your phone is receiving digital
data.
1X Protocol: Indicates your phone is using the CDMA 1X
protocol.
EVDO: Appears when your phone is using the EVDO
protocol.
EVDO/1X: The EVDO/1X protocol is capable of highSection 2
speed broadband data (3G).
Note: 1X protocol is available only in the Verizon Wireless network.
EVDO/2G: Indicates your phone is using the EVDO 2G
protocol.
SSL: Indicates the secure socket layer is active transmits
your communications over the internet in an encrypted
format.
Voice Privacy: Prevents eavesdropping over a CDMA
traffic channel.
Device Lock: Indicates your keypad is locked.
22
Understanding the Display Screen
No service indicator: Your phone cannot find a signal
because you’re outside a service area. You cannot make
or receive calls. Wait for a signal or move to an open area
to find a signal. This indicator always appears when you
first turn on your phone and disappears once service is
located.
Dormant: Indicates no incoming or outgoing data.
Voice Call: Indicates a call in progress. When dialing a
number, this icon flashes until the call connects.
Data Call: Indicates a call in progress. When dialing a
number, this icon flashes until the call connects.
Alarm clock: The alarm clock is set.
E911: Global Positioning Service is set to On for location
and 911 calls.
Location On: Global Positioning Service (GPS) for 911 is
set to On for emergency calls only.
technology is active.
Bluetooth Connected: Indicates Bluetooth wireless
technology is active and connected.
Battery Level: More bars indicate a greater charge.
When the battery is low, an empty battery icon flashes
and the phone sounds an alert, which indicates your
phone is about to shut down.
TTY: Indicates that TTY is enabled.
All Off: The ringer is silenced for all alerts, incoming
calls, and incoming messages. The phone alerts you by
vibration and a flashing service LED.
Section 2: Understanding Your Phone
23
Section 2
Bluetooth: Indicates that Bluetooth wireless
Alarm Only: Your phone will only ring when the set
alarm sounds.
Vibrate On: Your phone vibrates upon receiving a call.
Speakerphone: Your phone switches to
speakerphone instead of earpiece.
Missed Calls: Your phone displays this icon when calls
are missed.
New Message: You’ve received a new text, page or web
alert message. You’re also notified of a new message by
animations and sound. You have one or more unread
voicemail messages in your voicemail box. (Only
applicable on Verizon Wireless Network.)
Calendar Appointment: Your phone displays this icon
when you have a calendar appointment scheduled.
Voicemail: You’ve received a voicemail message, page
or web alert message.
Section 2
Alarm On: Indicates that your phone has a set alarm.
Auto Answer: Automatic answer is enabled. Your phone
automatically picks up calls after the designated time
with stereo headset or bluetooth headset connected.
Dialogue boxes
Dialogue boxes prompt for action, inform you of status, or
warn of situations such as low memory. Dialogue boxes
and their definitions are outlined below.
• Choice
• Example: “Save message draft?”
• Reconfirm
24
Battery
• Example: “Delete all received messages?”
• Performing
• Example: “Sending...” “Connecting...”
• Completed
• Example: “Message sent successfully!”
• Information
• Example: “New Message”
• Error
• Example: “System Error!”
• Warning
• Example: “Battery Low,” “Memory Full!”
Battery
Note: This phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Section 2: Understanding Your Phone
25
Section 2
Important: Although the phone can be used while the battery is charging,
the battery must be fully charged before first use, otherwise you could
damage the battery.
Install the Battery
1. Insert the bottom end of the
battery into the phone
housing with the label side
down. The gold contacts on
the end of the battery should
match up with those on the
phone.
2. Push the top end of the
battery down until it snaps
into place.
Remove the Battery
Section 2
1. Pull the battery release
latch toward the top of the
phone. The top of the
battery should pop up.
2. Use your finger to lift the
battery (top end first) up
and away from the phone.
Charge the Battery
Your phone is powered by a rechargeable standard Li-ion
battery. Only use Samsung-approved charging devices
and batteries. Samsung accessories are designed to
maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.
26
Removable Memory Card Storage
Travel Adapter
The travel adapter is a convenient, light-weight charger
that rapidly charges your phone from any 120/ 220 VAC
outlet.
1. Plug the large end of the
travel adapter into a
standard 120/220 VAC wall
outlet.
2. Insert the smaller end of
the adapter into the
charger/ accessory
connector at the bottom end of the phone.
Note: You can use your phone while charging, however, the battery
charges faster if the phone is turned off.
Battery Indicator
Removable Memory Card Storage
Note: Your phone does not come with the TransFlash memory card, it must
be purchased as an accessory. See your service provider for more
information.
Section 2: Understanding Your Phone
27
Section 2
The battery indicator
in the upper-right corner of the
display indicates battery power level. Four bars indicate
a full charge, while an empty icon indicates an almost
empty battery. Two to three minutes before the battery
becomes too low to operate, a blinking empty battery icon
appears and a tone sounds. If you continue to operate
the phone without charging, it shuts down.
The following file types can be saved to the removable
TransFlash memory card:
• PIX: Pictures you have saved from a PIX message or taken
using your phone.
• FLIX: Video Clips you have saved from a FLIX message or taken
using your phone.
• MP3s: MP3 music that you have transferred from your PC.
• Sounds: Sounds you have recorded using your phone or saved
from a PIX message with Sound attached.
Phone Memory Storage
The following file types can be saved to the phone
memory storage area:
• PIX: Pictures you have saved from a PIX message, downloaded
via the “Get It Now’ application, or taken using your phone.
• FLIX: Video Clips you have saved from a FLIX message,
Section 2
downloaded via the “Get It Now” application, or taken using
your phone.
• Sounds: Sounds you have downloaded, recorded using your
phone, or saved from a PIX message with Sound attached.
• Ringtones: Ringtones you have downloaded via the “Get It
Now” application, or saved from a PIX message with Ringtone
attached.
• Voice Memo: Memos you have created.
Note: MP3 files cannot be transferred to phone memory.
28
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
• Call History
• Roaming
• TTY
• VoiceSignal
• Voice Memos
This section allows you to make or answer a call. It also
includes the features and functionality associated with
making or answering a call.
Section 3
Section 3: Call Functions
29
Making a Call
1. At the standby screen, enter the number you want to call
using the keypad.
2. Press
.
Making Calls Using Contacts
Contacts are entries that you create to store names,
numbers, and other information for people or groups of
interest. If you’ve already entered information into your
Contacts list, you can recall and dial the contact easily. See
"Adding a Contact" on page 63 for information on creating
contacts.
1. At the standby screen, press the right soft key Contacts.
2. Press the or keys on the side of your phone or the
navigation up and down keys until the contact that you
want to call is highlighted.
Tip: To quickly locate a name, press (or multi-press) any key on the
keypad that corresponds to the first, second, and/or third letters of the
contact’s name.
3. When the desired contact is highlighted, press
VIEW. Details for the contact appear in the display.
4. If the entry contains more than one number, use
to highlight the desired number.
Section 3
5. Press
or
to call the number.
Answering a Call
When you receive an incoming call, the Incoming screen
appears in the display, press the
key to answer the call
30
Call History
or Ignore to send the call to voicemail, or Quiet to silence
the ringer.
Note: To change the answer options, see "Answer Options" on page
110.
Answering Call-Waiting Calls
• When you receive a call while on a call, the Incoming screen
displays. You can press
and answer the new call or let the
new call go to your voicemail.
• If you choose
and answer the incoming call, the original
caller is placed on call waiting. To return to your original call
when you finish with an incoming call, press the
Send key.
Call History
When you place, miss, or receive a call, a record of the call
is saved in Call History, which is a listing of the different
types of calls you can either receive or make. These types
of calls are listed below.
• Missed: Displays any missed calls.
• Received: Displays any received calls that were answered.
• Dialed: Displays all outgoing calls made from your phone.
• All: Displays all missed, received, and outgoing calls made
from your phone.
Call History retains information such as the duration,
date and time, whether the call was received, dialed, or
missed.
Section 3: Call Functions
31
Section 3
Viewing Call Information
1. At the standby screen, press the
key.
2. Press the down navigation key to highlight the desired
number.
3. Once the desired number is highlighted, press
OPEN.
4. The following options appear in the display:
• “type” call: Where “type” indicates if the call was missed,
dialed, or received.
• Name: If the caller is in your Contacts list, their name is listed
here. This option only appears if the caller is in your Contacts
list.
• Number: Displays the telephone number as well as the
appropriate icon to indicate mobile, work, or home number.
• Date: The date of the call.
• Time: The time of the call.
• Duration: The duration of the call.
5. Press the right soft key
following options:
•
•
•
•
Options to display the
Save: Save the number to your Contacts list.
Details: If a contact list shows.
Erase: Delete the call from Call History.
Lock/Unlock: locks or unlocks the entry to prevent
Section 3
accidental deletion.
• Erase All: Delete the entire Call History list at one time.
• View Timers: Select to view the call timers for your phone.
6. Press the down navigation key to highlight an option.
Press
to enter the highlighted option’s sub-menu.
32
Call History
Call History Icons
When you view Call History, an icon to the left of the
number indicates the type of call.
Indicates a Missed call
Indicates a Dialed call
Indicates a Received call
Making Calls Using Call History
1. At the standby screen, press
then press up or down
navigation key until the desired number is highlighted.
2. Press
to call the highlighted number. Or, you can
press
OPEN, then press
to call the highlighted
number.
Creating or Updating Contacts Using Call History
1. At the standby screen, press
then press up or down
navigation key until the desired number is highlighted.
2. Press the right soft key
Press
.
Options. Save is highlighted.
3. Use the up or down navigation keys to highlight Create
New or Update Existing. Press
.
• Mobile 1
• Mobile 2
• Home
Section 3: Call Functions
33
Section 3
4. Use the up or down navigation keys to highlight one of
the following options:
• Work
• Fax
5. Press
to add a new contact, and then enter
information.
6. Use the navigation keys to enter additional information
for the entry and then press
SAVE.
Delete Call History Entries
1. At the standby screen, press
then press up or down
navigation key until the desired number is highlighted.
2. Press the right soft key
appears in the display.
Options. A pop-up menu
3. Press the down navigation key to highlight Erase and
press
. Select Yes or No at the ERASE ENTRY? popup screen.
4. Press
.
Delete All Call History Entries
1. At the standby screen, press
2. Press the right soft key
appears in the display.
.
Options. A pop-up menu
3. Press the down navigation key to highlight Erase All and
press
. Select Yes or No at the ERASE ALL
ENTRIES? pop-up screen.
Section 3
4. Press
34
.
Roaming
Roaming
What is Roaming?
Your phone can roam on other digital networks. Roaming
occurs when you travel outside a pre-designated
coverage area. The roaming icon displays when roaming
is active and extra charges may apply when making or
receiving calls.
Note: Some features may be unavailable while roaming.
Roaming Options
The following roaming options are available:
• Home Only - Your phone is available for normal operation only
in the designated coverage area.
• Automatic-A: The preferred roaming list is used to acquire
service. If no preferred systems are found, any digital "A"
system is acquired.
• Automatic-B: The preferred roaming list is used to acquire
service. If no preferred systems are found, any digital "B"
system is acquired.
Note: Contact your service provider for information regarding preferred
systems.
To change your Roaming option, follow these steps:
MENU. Use the right navigation key to
SETTINGS & TOOLS.
2. Press
System.
3. Press
System Select.
Section 3: Call Functions
Section 3
1. Press
highlight
35
4. Use the up or down navigation keys to choose the setting
you want, and press
.
TTY
Your phone is fully TTY compatible. Connect the TTY
equipment to the headset jack, which is located on the left
side of the phone. Before you can use your phone with a
TTY device, you’ll need to enable TTY functions in the
phone.
1. Press
highlight
MENU. Use the right navigation key to
SETTINGS & TOOLS.
2. Press
Call Settings.
3. Press
TTY Mode. The TTY Mode screen displays.
4. Use the up or down navigation keys to select one of the
following:
•
•
•
•
TTY Off
TTY Full
TTY Hearing
TTY Voice
5. Press
to make your selection. The TTY Mode Set
screen displays.
Section 3
VoiceSignal
VoiceSignal is advanced speech recognition software that
can be used to activate a wide-variety of functions on
your phone. VoiceSignal software automatically voice
activates all contacts for voice dialing and searching, no
pre-recording or training needed. Speak phone numbers
36
VoiceSignal
naturally to dial, and use voice commands to launch
applications and navigate phone menus.
VoiceSignal Settings
You can adjust the settings and preferences for
VoiceSignal by opening Voice Services menu. Using this
menu, you can change the following Voice Command
features:
• Tips for adapting Digit Dial
• Digit Dial Adaptation
• Reset Digit Dial Adaptation
• Call Digit Dialing
• Call Name Dialing
• Name Lookup
• Opening Apps
To access the VoiceSignal Settings menu, follow these
steps:
1. At the standby screen, press
MENU. Use the right
navigation key to highlight
SETTINGS & TOOLS.
2. Press
Tools, then
Train Word.
Voice Services, and
3. Use the navigation keys to select the setting you want to
change. The following options are available:
it has correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you to
Section 3: Call Functions
37
Section 3
• Choice Lists: If Voice Signal is not absolutely confident that
Section 3
confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
• Automatic: Voice Signal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
• Always On: When there are multiple alternatives, Voice
Signal always displays a choice list.
• Always Off: Voice Signal never displays a choice list.
Instead, the application picks the best from among the possible
choices.
• Sensitivity: In Voice Signal, sensitivity controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or
commands, and rejecting too little, which means it
frequently recognizes something even if nothing was said.
When Voice Signal rejects an utterance, it displays a
message such as “Please repeat…” or “No match found.” If
you frequently experience these messages, you might be
able to get better recognition by adjusting the Sensitivity
setting toward Reject Less. If you frequently experience
false activations (Voice Signal detects a wrong match), you
might be able to get better performance by adjusting the
Sensitivity setting toward Reject More.
• Digit Dialing: Use the Digit Dialing menu to adapt digit
dialing to your voice.
• Adapt Digits: Lets you adapt digits, which can improve
voice recognition of phone numbers. Adaptation takes about
60 seconds.
• Reset Digits: Erases any digit adaptation you have done and
resets digit recognition to the factory default. If you have not
adapted digits, this option is grayed out.
• Sound: You can customize the Voice Signal user interface by
turning playback on or off for prompts, names, and numbers.
38
VoiceSignal
You can also change the speed and volume of name
playback.
• Prompts: Turns playback on or off for prompts such as
“Please say a command.”
• Digits: Turns playback on or off for digits, for example, when
confirming a phone number.
• Names: Turns playback on or off for names.
• Name Settings: Adjusts the speed and volume of name
playback.
• About: Displays information about VoiceSignal including
version number, build number, and device number.
You can also access the Voice Signal Settings menu by
following these steps:
1. In standby mode, press and hold
2. Press the left soft key
for two seconds.
Settings.
3. Use the navigation keys to select the setting you want to
change.
Adapting VoiceSignal
Voice dialing works well for most people without special
adaptation. However, people with strong accents or
unique voice characteristics may receive better results
after adapting the system to match their voices.
Section 3: Call Functions
39
Section 3
You should adapt Digit Dial only if the system is
frequently unable to recognize your speech. After you
adapt Digit Dial, your phone is customized to your voice,
and your voice only. Others will not be able to use it unless
they reset the phone to factory defaults.
Adaptation involves recording several digit sequences to
adapt the system to the unique properties of your voice.
The adaptation process takes about three minutes.
Tips for adapting Digit Dial
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if
there is an unexpected noise that spoils the recording, rerecord that sequence.
• Only adapt digits if you regularly have problems with digit
dialing. Once adapted, digit dialing will not work as well for
other people using your phone.
• Adapt Digit Dial to your Voice
Digit Dial Adaptation
To access the Adapt Digits menu, follow these steps:
1. At the standby screen, press
MENU. Use the right
navigation key to highlight
SETTINGS & TOOLS.
2. Press
Tools, then
Voice Services.
3. Press
Train Word, then
4. Adapt Digits is highlighted. Press
Digit Dialing.
.
5. A short description of the Adapt Digits displays.
Section 3
6. Read the description until you are comfortable to
proceed, then press
.
7. Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
40
VoiceSignal
Wait for the beep and repeat the digits using your normal
tone of voice.
8. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
9. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After ten
sets of digits, the phone indicates that adaptation is
complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1. At the standby screen, press
MENU. Use the right
navigation key to highlight
SETTINGS & TOOLS.
2. Press
Tools, then
Voice Services.
3. Press
Train Word, then
Digit Dialing.
4. Highlight
Reset Digits and press
. The Reset
Digit Adaptation screen displays requesting conformation
of reset.
5. Press
to proceed. Digit Adaptation Reset is
completed.
Section 3: Call Functions
41
Section 3
Note: If you have not performed the Adapt Digits function, the Reset Digits
option will not be accessible.
VoiceSignal Commands
The following is a list of functions that you can perform
using VoiceSignal speech recognition on your phone.
• Call <Name> <Loc.>: Dial by saying either a Name in your
Contacts list and the location (home, work, mobile)
• Call <Number>: Dial by saying the number you want.
• Send Text<Name>: Send a text message to a number or to
someone in your Contacts List.
• Lookup <Name>: Open the contact record for any name in
your Contacts list.
• Go to <Menu>: Open any application installed on your device.
• Check <Item>: Provides details of your coverage, signal
strength, and battery level.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in
your Contacts list. See page 63 for information on creating
a Contacts list.
1. Press and hold
for two seconds.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece.
3. Say “Call” at a distance of 3-12 inches from the phone in
a natural voice.
Section 3
4. “Say the Name or Number” plays through the earpiece or
speakerphone--if it is enabled.
5. To use Name Dialing, say the name of the contact that
you want to dial.
42
VoiceSignal
6. The name that you said is repeated through the earpiece
and your phone dials the number.
7. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
8. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
9. The location is repeated through the earpiece and your
phone dials the number.
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply
speaking the digits into the phone. No training is
necessary, and Digit Dial is programmed to understand
natural speech.
1. Press and hold
for two seconds.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece or speakerphone--if it is
enabled.
3. Say “Call” at a distance of 3-12 inches from the phone in
a natural voice.
4. “Say the Name or Number” plays through the earpiece.
6. The number that you said is repeated through the
earpiece and your phone dials the number.
Section 3: Call Functions
43
Section 3
5. To use Digit Dialing, say the area code and number that
you want to dial into the microphone, clearly and
naturally.
7. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
8. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
Name Lookup
To perform a name lookup, you’ll need to have some
entries in your Contacts list.
1. Press and hold
for two seconds.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece or
speakerphone--if it is enabled.
3. Say “Lookup” at a distance of 3-12 inches from the
microphone. “Say the name” plays through the earpiece
or speakerphone.
4. Say the name exactly as it is displayed in your Contacts
list, first name followed by last name.
5. The contact name appears in the display with other
information that you’ve entered for that contact.
Opening Apps
The example that follows instructs you how to open
Internet Explorer. However, you can open any
application on your phone using VoiceSignal.
Section 3
1. Press and hold
for two seconds.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece or
speakerphone--if it is enabled.
44
Voice Memos
3. Say “Go To” at a distance of 3-12 inches from the
microphone. A list of options displays and a prompt of
“Please choose” plays through the earpiece or
speakerphone.
4. The menu option spoken opens.
Voice Memos
You can record a phone number, parking location, or
simple reminders using Voice Memos.
Recording Memos
1. At the standby screen, press
MENU. Use the right
navigation key to highlight
SETTINGS & TOOLS.
2. Press
Tools, then
Voice Services.
3. Press
Voice Memo. Press the left soft key
to create a new Voice Memo.
New
4. Press
REC to begin recording. Press the left soft
key
PAUSE or, if paused, press the
RESUME key
to continue recording. Press
STOP to stop
recording.
5. The new Voice Memo is saved with a system defined
name. Press the right soft key
Options to choose
from the following:
Section 3: Call Functions
Section 3
• Detail Info: provides the voice memo title, length, size,
recorded date and time.
• Rename: allows you to rename the voice memo.
• Erase: allows you to delete the memo.
• Erase All: allows you to delete all voice memos saved.
45
Renaming Recordings
1. At the standby screen, press
MENU. Use the right
navigation key to highlight
SETTINGS & TOOLS.
2. Press
Tools, then
Voice Services.
3. Press
Voice Memo. Use the navigation key until the
recording you want to rename is highlighted.
4. Press the right soft key
Options. Press
to rename the Voice Memo.
Rename
5. Press and hold
until the current name for the
recording is deleted. Use the keypad to enter a new
name for the recording.
Section 3
6. Press
SAVE when finished or the right soft key
Back to exit and return to the previous menu.
46
Section 4: Menu Navigation
Section 4
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your
phone. It also includes an outline of all the available
menus associated with your phone.
Section 4: Menu Navigation
47
Section 4
Menu Navigation
Access menus using the navigation keys, two soft keys
, or use a shortcut.
1. In standby mode press
MENU. The first of several
menus appear in the display.
2. Use the navigation keys to browse phone menus.
3. Press
to enter the menu or sub-menu presently
appearing in the display.
Return to the Previous Menu
Press
to return to the previous menu.
Navigate Using Shortcuts
You can also access menus and sub-menus using menu
numbers. This method is often called a “shortcut.” To
shortcut to a menu or sub-menu, press
MENU, then
enter the menu and/or sub-menu number(s) for the
feature in question. Use "Navigation Key Shortcuts" on
page 49, for looking up the menu shortcut number.
1. In standby mode, press
menu is launched.
MENU. The
CONTACTS
2. Press the number of the menu, sub-menu, and so on to
arrive at the desired feature.
3. Press
MENU, then press
Business.
48
Groups,
Menu Navigation
Navigation Key Shortcuts
The Shortcut menu is set to Calendar by default, but it can
be customized to select other functions instead.
In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Tools
Shortcut Key. The shortcut key list
displays. Use the navigation key to change the setting and
press
to save your selection.
The In-Use Option
Access numerous menus and features even while in a call.
Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to
standby mode.
1. While in a call, press the right soft key
Options. The
following menu items appear in the display.
• Message: Open the Messages menu.
• Contacts: Open the contacts to view.
Section 4: Menu Navigation
49
Section 4
In standby mode, press a navigation key (as illustrated
below) to launch its corresponding application.
Section 4
• Recent Calls: Display your recent incoming, missed and
outgoing calls.
• Send DTMF: Sends keypad tones.
• Voice Privacy: Prevent recipients of your calls from seeing
your number on their display. Select from standard or
enhanced options.
• Voice Memo: Record a voice memo.
• Switch To Headset-Phone: Switches the device from
handset to Bluetooth wireless technology headset.
2. Use the navigation key to highlight a menu. Press
to
open the highlighted menu or to activate the feature.
Menu Outline
Use the menu shortcuts on the following pages to quickly
access sub-menus. Press
to access Menu, then use the
navigation keys to highlight the menu. right of the menu
to jump to that menu, sub-menu, or feature.
CONTACTS
1: New Contact
2: Contact List
3: Groups
1: No Group
2: Business
3: Colleague
4: Family
5: Friends
4: Speed Dials
5: My Name Card
GET IT NOW
1: Get Tunes & Tones
1: Get New Ringtones
50
Menu Outline
Section 4
1: Get New App.
2: My Ringtones
1: Get new Ringtones
1: Get New App.
3: My MP3s
4: My Sounds
1: Record New
2: Get PIX & FLIX
1: Get V CAST Video
2: Get New PIX
1: Get New App.
3: My PIX
4: My FLIX
5: PIX Place
6: Take PIX
7: Take FLIX
3: Get Fun & Games
1: Get New App.
4: Get News & Info
5: Get Going
1: Get New App.
6: Get More
1: Get New App.
MESSAGING
1: New TXT Msg
2: New PIX/FLIX Msg
3: New Handwritten Msg
4: Inbox
5: Sent
6: Drafts
7: Voicemail
8: E-Mail
9: Mobile IM
Section 4: Menu Navigation
51
0: Chat
RECENT CALLS
Section 4
1: Missed
2: Received
3: Dialed
4: All
5: View Timers
SETTINGS & TOOLS
1: My Account
2: Tools
1: Calendar
2: MP3 Player
3: Alarm Clock
4: World Clock
5: Notepad
6: Calculator
7: Voice Services
1: Voice Dial
2: Train Word
3: Voice Memo
8: Shortcut Key
3: Sounds
1: Master Volume
2: Call Sounds
1: Call Ringtone
2: Call Vibrate
3: Alert Sounds
1: TXT Message
2: PIX-FLIX Message
3: Voicemail Message
4: Keypad Volume
5: Earpiece Volume
6: Service Alerts
52
Menu Outline
Section 4: Menu Navigation
Section 4
1: ERI
2: Minute Beep
3: Call Connect
7: Power On/Off
1: Power On
2: Power Off
4: Display
1: Banner
1: Personal Banner
2: ERI Banner
2: Backlight
1: Display
2: Keypad
3: Contrast
4: Wallpaper
1: Main LCD
2: Front LCD
5: Display Theme
6: Power On/Off Animation
1: Power On
2: Power Off
7: Service LED
5: System
1: Device Info
1: My Number
2: SW Version
3: Icon Glossary
2: Manage Memory
1: Save Options
2: Phone Memory
3: Card Memory
3: Language
4: Location
5: Security
53
Section 4
6: System Select
7: NAM Selection
8: Standalone Mode
6: Call Settings
1: Answer Options
2: Auto Retry
3: TTY Mode
4: One Touch Dial
5: Voice Privacy
6: Call Restrictions
1: Outgoing Call
2: Incoming Call
3: Contacts
7: Data Settings
8: DTMF Tones
7: Clock Format
1: Main Clock
2: Front Clock
8: Ringer ID
9: Picture ID
0: Bluetooth
1: On/Off
2: Search
1: All Devices
2: Audible Device
3: Disconnect
4: Registered List
5: Bluetooth Settings
1: My Device Name
2: Visibility
3: Security
54
Section 5: Entering Text
Topics Covered
• Changing the Text Entry Mode
• Using Word Mode
• Entering Upper and Lower Case
• Entering Symbols
• Entering Numbers
Section 5: Entering Text
55
Section 5
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the amount of key strokes
associated with entering text.
Changing the Text Entry Mode
1. While composing a message in the Text area, press the
right soft key
Options to display the following
options:
• Add: Allows you to add more information or multimedia
Section 5
items to your message.
• Graphics: Lists preloaded and downloaded graphics to add
to the message.
• Animations: Lists preloaded and downloaded animations to
add to the message.
• Sounds: Lists preloaded and downloaded sounds to add to
the message.
• Quick Text: Choose from up to 12 messages.
• Name Card: Select from My Name Card or Contacts to add
to the message.
• Edit Text Format: Change font size, text alignment, style,
and color.
• Save as Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Callback #: Provides the option to send a callback number
with the message.
• Validity Period: Save the message for the assigned period of
time.
• Deferred Delivery: Save the message to be delivered at the
assigned delivery date and time.
• Enh. Delivery Ack: Displays a pop-up screen notifying the
message sent has been received.
56
Using Word Mode
2. While composing a message, press left soft key
Abc
to display a pop-up menu with the following Text Entry
Mode options:
•
•
•
•
•
Word
Abc
ABC
123
Symbols
Using Word Mode
1. In standby mode, press the left soft key
Message,
then press
New TXT Msg to compose a new text
message.
2. Enter the phone number or email address of the
recipient, then press the down navigation key to move to
the Text field.
3. Press the left soft key
Abc to display a pop-up menu
containing text entry mode options.
4. Abc is highlighted by default. Use the up/down
navigation keys to highlight Word, then press
.
Now, for practice, enter the word “Samsung” into your
message by pressing each of the following keys only
once:
Section 5: Entering Text
57
Section 5
Word recognizes the most commonly used word for any
sequence of key presses and inserts that word into your
message. It’s much faster than the traditional method of
text entry (Abc) and requires only one key press per letter
of the word that you’re spelling.
,
S
,
A
,
M
,
S
,
U
,
N
G
Word recognizes that the most frequently used word for
the sequence that you just entered is “Samsung.” If more
than one word shares the same sequence, Word provides
the most common of the two. Press
to display other
words in the dictionary, if available.
Entering Upper and Lower Case
Section 5
• Enter characters while in ABC mode by pressing the key that
contains the desired characters
for “H”.
• Press the key repeatedly to cycle through other available
characters for that key.
• Pause briefly when the desired character appears in the display
to accept the character and therefore insert it into the
message.
• Press
to enter a space.
• To cycle between uppercase, lower case, and initial caps for
characters in ABC mode, briefly press
.
Entering Symbols
Symbol mode enables you to enter symbols such as @ or%
into a text message.
1. In standby mode, press the left soft key
Message,
New TXT Msg to compose a new text message.
2. Enter the phone number or email address of the
recipient, then press the down navigation key to enter
text.
58
Entering Numbers
3. Press the left soft key
Abc to display a pop-up menu
containing the text entry mode options.
4. Abc is highlighted by default. Use the up/down
navigation keys to highlight Symbols, then press
.
The first of three screens containing symbols appears in
the display.
5. Press
Prev or
Next to page through the other
symbols, if necessary.
7. Repeat steps 3 through 6 to insert as many symbols into
your message as desired.
Entering Numbers
Enter numbers into a text message while in number mode
(123). See "Changing the Text Entry Mode" on page 56 for
instructions on changing text entry modes.
1. In standby mode, press the left soft key
Message,
New TXT Msg to compose a new text message.
2. Enter the phone number or email address of the
recipient, then press the down navigation key to enter
text.
3. Press the left soft key
Abc to display a pop-up menu
containing the text entry mode options.
4. Abc is highlighted by default. Use the up/down
navigation keys to highlight 123, then press
.
Section 5: Entering Text
59
Section 5
6. Enter the key that corresponds with the symbol that you
wish to enter. For example, press
for an
exclamation point (!) on the first page of symbols.
5. Enter the key that corresponds with the number that you
wish to enter. For example, press
for the number 4.
Section 5
6. When you are finished adding numbers, press the left
soft key
123 to change to another Text Entry Mode or
press
SEND to send your message.
60
Section 6: Understanding Your Contacts
Topics Covered
• Opening Contacts Menu
• Adding a Contact
• Adding Pauses
• Contact Groups
• Finding a Contact Entry
• Editing an Existing Contact Entry
• Deleting a Contact Entry
• Storing Numbers After a Call
• Speed Dialing
• My Name Card
• Finding My Phone Number
Section 6: Understanding Your Contacts
61
Section 6
This section allows you to manage your daily contacts by
storing their name and number in your Contacts menu.
Contact entries can be sorted by name, entry, or group.
Opening Contacts Menu
The Contacts menu provides access to powerful features
such as adding Groups, creating and sending V-cards,
and viewing the phone number assigned to your phone
by Verizon Wireless.
1. In standby mode, press
MENU. The
CONTACTS
menu displays.
• New Contact: Add a number, e-mail, or web address to your
Contacts.
• Contact List: Find a phone number by Name.
• Groups: Add new or rename one of your five default groups.
• Speed Dials: Set a speed dial for a contact.
• My Name Card: Create a business card, which can then be
sent to others as an attachment
2. Use the navigation key to highlight the
sub-menu of your choice, then press
CONTACTS
.
Section 6
Contacts Icons
You can assign multiple entries to a contact. The icons in
the following table represent all available entry types
Mobile 1 icon. Enter a mobile number for the entry in this
field.
Home icon. Enter a home number for the entry in this
field.
Work icon. Enter the work number for the entry in this
field.
E-mail 1 icon. Enter an e-mail address for the entry in this
field.
62
Adding a Contact
Group icon. Select an available group to associate with
the entry in this field.
Ringtone icon. Select a ringtone to associate with the
entry in this field.
Mobile 2 icon. Enter a secondary mobile number for the
entry in this field.
Fax icon. Enter a fax number for the entry in this field.
E-mail 2 icon. Enter a secondary e-mail address for the
entry in this field.
Adding a Contact
When you add information to your Contacts, you can add
it as a new entry or as an existing entry.
Method 1
1. In standby mode, press
menu opens.
CONTACTS
New Contact to enter the contact information.
3. Enter a name for the entry using the keypad.
4. Use the navigation key to highlight the appropriate type
(Mobile, Home, Work, E-mail, etc.). Once highlighted,
use the keypad to enter required information.
5. Use the navigation key to highlight other type fields, if
desired. Enter information using the keypad.
6. When you’re finished entering information for the entry,
press
SAVE to save the entry to your Contacts.
Section 6: Understanding Your Contacts
63
Section 6
2. Press
MENU, the
Method 2
You can add new numbers to the Contacts by simply
entering the number while the phone is in standby mode,
then following the necessary prompts to complete the
process.
1. In standby mode, enter the number that you wish to save
using the keypad, then press the left soft key
Save.
You’re prompted to select from Create New or Update
Existing.
2. Press
press
to enter the number as a Create New, or
to append the number to Update Existing.
3. If you selected Create New, the following types are
available.
•
Section 6
•
•
•
•
Mobile 1
Mobile 2
Home
Work
Fax
4. If you selected Update Existing, proceed to step 8.
5. Use the up/down navigation keys to highlight the desired
entry type (mobile, home, work, etc.) then press
.
6. Enter a name for the entry using the keypad. Press the
left soft key
Abc if you wish to select a different
method of text entry, such as Word, Abc, ABC, 123, or
Symbols.
7. When you’re finished entering information for the entry,
press
SAVE. The entry is saved to your Contacts.
64
Adding Pauses
8. If you selected Update Existing, the Contact List opens
in Search mode. Use the navigation key to browse
through entries, or enter the name of the entry using the
keypad. Once you’ve highlighted the entry you wish to
append the number, press
.
9. An UPDATE EXISTING pop-up screen with a selection list
of entry types displays. Use the up or down navigation
keys to highlight the desired type then press
. The
number is appended to the selected entry and saved to
your Contacts.
Adding Pauses
Calls to automated systems often require a password or
account number. Instead of manually entering numbers
each time, store the numbers to your Contacts along with
special characters called pauses.
• Wait: A hard pause stops the calling sequence until further
input from you.
for two seconds and then automatically sends the remaining
digits.
Note: Entering multiple two-second pauses extends the length of a pause.
For example, two consecutive two-second pauses cause a total pause
time of four seconds. Keep in mind pauses count as digits towards the 48digit maximum.
Contact Groups
You can place any Contact entry into one of five
categories, called “Groups.” Groups allow you to search
Section 6: Understanding Your Contacts
65
Section 6
• 2-sec pause: A two-second pause stops the calling sequence
your Contacts faster, quickly send messages to one or
more group members, and more.
Note: By default, new entries to your Contacts are placed into the No Group
unless another group is specified.
View Groups
1. In standby mode, press
MENU, then press
Groups. The following groups appear in the display.
• No Group
• Business
• Colleague
• Family
• Friends
Section 6
2. Use the navigation key to highlight the desired group,
then press
to access the group and view its
contents.
Move an Entry to Another Group
1. In standby mode, press the right soft key
Contacts.
Use the navigation key to highlight the contact you wish
to move.
2. Press the left soft key
Edit. Use the up/down
navigation key to scroll to the Group option.
3. Press the left soft key
groups:
•
•
•
•
66
No Group
Business
Colleague
Family
Set. Choose from the following
Contact Groups
• Friends
4. Use the navigation key to highlight the group containing
the entry that you wish to move, then press
.
5. Press
SAVE. The selection has been saved to the
designated group.
Create a New Group
In addition to the five groups already in your phone, you
can create additional groups (a maximum of 10). New
groups can be named anything you like as long as their
names are within the 32-character limit.
1. In standby mode, press
MENU, then press
Groups. Your existing groups appear in the display.
2. Press the left soft key
New. A New Group pop-up
menu displays with the “Enter new name” highlighted.
SAVE to save. The Groups list now displays
3. Press
the new group added.
Use Send Message in the Group feature to send a message
to as many as 10 members of a group at once.
Note: Text messaging availability varies when roaming off the Verizon
Wireless Network.
1. In standby mode, press
MENU, then press
Groups. Your existing groups appear in the display.
2. Highlight the desired group name and press the right soft
key
Options. Highlight Send TXT Msg and press
.
Section 6: Understanding Your Contacts
67
Section 6
Send a Text Message to Members of a Group
3. Use the down navigation key to highlight the contacts in
the group to which you want to send a message. Press
to place a checkmark next to each selection to send
messages to.
4. Press the left soft key
contacts.
Done after selecting up to 10
Note: You can mark up to 10 members of a group for message distribution.
If you try and mark an 11th member, you’ll be notified that “MAX NUMBER
OF DESTINATIONS IS 10”.
5. Press the down navigation key to place the cursor in the
Text field.
6. Enter the content of your message using the keypad.
7. To send the text message, press
SEND.
Section 6
Send a PIX Msg to Members of a Group
Note: Only available within Verizon Wireless Enhanced Services Area.
1. In standby mode, press
MENU, then press
Groups. Your existing groups appear in the display.
2. Highlight the desired group name and press the right soft
key
Options. Highlight Send PIX Msg and press
.
3. Use the down navigation key to highlight the contacts in
the group to which you want to send a message. Press
to place a checkmark next to each selection to send
messages to.
68
Finding a Contacts Entry
4. Press the left soft key
contacts.
Done after selecting up to 10
5. The CREATE PIX/FLIX MSG screen appears. Press the
down navigation key to move the cursor into the
following entry fields:
• Text: Add text to the PIX Msg.
• PIX/FLIX: Add an image from the PIX or FLIX Gallery to the
message.
• Sound: Add sound to the PIX Msg
• Subject: Add a subject to the PIX Msg.
• Name Card: Attach a Name Card or an entry in your
Contacts to the message.
6. Once you’ve finished adding the desired content to your
PIX Msg, press
SEND to send the PIX Msg to the
intended recipients.
Finding a Contacts Entry
1. In standby mode, press the right soft key
The Contact List displays.
Contacts.
2. In the Search field, enter the first and second letters of
the name you wish to search until it is highlighted.
Editing an Existing Contact Entry
1. In standby mode, press
Contact List.
MENU, then press
Section 6: Understanding Your Contacts
69
Section 6
From standby mode, you can quickly open the Contacts
list. Contacts is a quick way of viewing entries you’ve
stored in the Contacts list.
2. Use the navigation key to highlight the contact list entry
and press the left soft key
Edit.
3. Use the navigation key to highlight the name, number, email address, or other field that you wish to edit.
4. Press
to backspace and delete numbers, text, or
symbols.
5. Press and hold
highlighted field.
to erase all numbers in the
6. Use the keypad to re-enter numbers, text, or symbols.
7. When you’re finished editing the entry, press
Your changes are saved.
SAVE.
Deleting a Contact Entry
1. In standby mode, press
Contact List.
MENU, then press
Section 6
2. Use the navigation key to display the contact list entry
and press
VIEW.
3. Press the left soft key
Erase.
4. A pop-up “Erase Entry?” screen displays.
5. Highlight Yes or No, then press
.
Storing Numbers After a Call
Once you’ve finished a call, you can store the number of
the caller to your Contact List.
Note: If the call was incoming and Caller ID information was unavailable,
then the store option is also unavailable.
70
Speed Dialing
1. After you press
to end your call, the call time, length
of call and phone number appears in the display.
2. Press the right soft key
Save. You’re prompted to
confirm this as a Create New, or Update Existing.
3. Follow the on-screen prompts to designate other
information.
Store a number in standby mode
Store a phone number by entering the number in standby
mode, then press
Save. Follow the screen prompts to
assign number types and other information.
Speed Dialing
Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers
stored in your Contact List quicker.
Note: Memory location 001 is reserved for voicemail.
1-touch dialing
Call phone numbers assigned to memory locations 002 009 by pressing and holding the any of the 2 - 9 keys. For
example, to speed dial the number assigned to location 2,
press and hold
until the name and number appear in
the display and the number is dialed.
Section 6: Understanding Your Contacts
71
Section 6
Speed dialing allows you to press and hold a key (or keys)
to dial the number associated with those key(s). There are
three types of speed dialing; 1-touch, 2-touch, and 3-touch
dialing.
2-touch dialing
Call phone numbers assigned to keys 010 through 099 by
briefly pressing the first key, then pressing and holding
the second key. For example, to speed dial the number
assigned to 013, briefly press
, then press and hold
until the number dials.
3-touch dialing
Call phone numbers assigned to memory locations 100
through 500 by briefly pressing the first and second keys,
then pressing and holding the third key. For example, to
dial location number 113, briefly press
,
, then
press and hold
until the number dials.
Assign a speed dial location
1. In standby mode, press
MENU, then press
Speed Dials. The Speed Dials screen displays with the
first available number highlighted.
Section 6
2. Use the navigation keys to highlight the number you wish
to assign or enter the speed dial location using the
keypad, press
SET.
3. The ADD SPEED DIAL screen displays.
4. Use the navigation keys to highlight the entry you want,
then press
.
5. At the pop-up screen, use the navigation key to highlight
Yes or No and press
.
6. Continue to assign speed dial entries or press the
key to return to standby mode.
72
My Name Card
My Name Card
My Name Card allows you to create a virtual business
card. Once completed, you can send the card to recipients
as a V-card attachment.
1. In standby mode, press
Name Card.
MENU, then press
My
2. My Name Card opens with the Name field highlighted.
3. Enter information in each of the fields as desired. Use the
navigation key to move between fields, then use the
keypad to enter information.
4. When finished, press
to save the V-card.
Finding My Phone Number
My Number displays the ten-digit number assigned to
your phone.
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS.
System.
3. Press
Device Info. The My Number field is
highlighted. Press
. The mobile device, phone
number, and mobile identification number are displayed.
Section 6: Understanding Your Contacts
73
Section 6
2. Press
74
Section 6
Section 7: Messaging
Topics Covered
• Types of Messages
• Retrieving New Messages
• Creating and Sending TXT Messages
• Creating and Sending PIX/FLIX Messages
• Receiving PIX/FLIX Messages
• New Handwritten Messages
• Message Folders
• Changing Message Settings
• Voicemail
• E-Mail
• Mobile IM
• Chat
This section allows you to send or receive different types
of messages. It also includes the features and functionality
associated with messaging.
Section 7
Section 7: Messaging
75
Types of Messages
Your phone is capable of sending email, text, PIX & FLIX,
and voicemail messages. Send email, text, PIX & FLIX
messages by simply entering the email address or the
phone number of the recipient in the To: <.........> or Send
To field when creating a new message.
Retrieving New Messages
While text messages from other phones are delivered
directly to your phone, PIX/FLIX messages and emails
will be stored in the Inbox of the message server and the
server will alert you to new messages. Therefore you need
to retrieve new messages to your phone and read them on
the phone.
Retrieving a Text Message
When you receive a message in standby mode, the
message ringer sounds, (unless turned off), and New Text
Msg appears in the display along with the closed
envelope icon . The date and time of the message also
appear in the display.
1. Press
to View now, or press the down navigation
key to highlight View later and press
. The message
is saved to your inbox where you can view it later.
Section 7
2. With the message open, press the right soft key
Options to Forward, Erase, Reply w/copy, Save Graphic,
Save Sound, Save Quick Text, Save Name Card, Add To
Contacts, Lock or Message Info.
3. With the message open, press
message to the sender.
76
REPLY to return a
Creating and Sending TXT Messages
Note: When viewing a TXT message, you can view the previous TXT
message by pressing the left navigation key and view the next TXT
message by pressing the right navigation key.
Creating and Sending TXT Messages
You can send text messages to another mobile phone or
to an email address.
1. In standby mode, press
MENU, then press the left
navigation key to highlight
MESSAGING, press
New TXT Message to compose a new text message. Or
press the left soft key
Message and press
New
TXT Message.
2. Enter the phone number or email address of the
recipient.
3. Press the right soft key
Options to display a pop-up
menu with the options listed.
Section 7: Messaging
77
Section 7
• Entry Mode: Choose from Word, Abc, ABC, 123, Symbols
and Shortcuts modes of text entry.
• Save as Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Callback #: Provides the ability to send a callback # with the
message.
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at
the assigned delivery date and time.
• Enh. Delivery Ack: Displays a pop-up screen notifying the
message sent has been received.
4. Press the left soft key
Add to select from the following
options:
• Contacts: Choose a number from your contacts list or select
the right soft key to select from the Groups menu.
• Recent Calls: Choose a number from the recent calls list.
5. After selecting or entering your recipients in the To field,
use the down navigation key, or
key to move to the
message composer.
6. In the text field, compose your message using the
keypad. At any point while composing a message, press
the right soft key
Options to display the following
options:
• Add: Add information from the following categories.
• Graphics: Lists preloaded and downloaded graphics.
• Animations: Lists preloaded and downloaded animations.
• Sounds: Lists preloaded and downloaded sounds.
• Quick Text: Choose from up to 12 pre-loaded messages.
Section 7
You can add additional messages by pressing the right soft key
New and erase messages by pressing the left soft key
Erase.
• Name Card: Attach My Name Card information or
information from one of your Contacts.
• Edit Text Format: Allows you to edit the text size,
alignment, style, color, and background color.
• Save as Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Callback #: Provides the ability to send a callback # with the
message.
78
Creating and Sending PIX/FLIX Messages
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at the
assigned delivery date and time.
• Enh. Delivery Ack: Turn message delivery
acknowledgement Off or On.
7. Use the navigation key to highlight an option. Press
to perform the function for the option, or to enter its
sub-menu.
8. To send the message, press
SEND.
Creating and Sending PIX/FLIX Messages
Note: Only available within Verizon Wireless Enhanced Services Area.
You can add sounds and attach a Name Card or Contact
entry to your PIX/FLIX Msg. This is also known as
Multimedia Messaging (MMS).
1. In standby mode, press the left soft key
Message
then press
New PIX/FLIX Msg. Or in standby
mode, press
MENU and use the left navigation key
to highlight
MESSAGING then press
New PIX/
FLIX Msg.
2. Enter the phone number or e-mail address of the
recipient (or recipients) using the keypad.
• Entry Mode: Choose from Word, Abc, ABC, 123, Symbols
and Shortcuts modes of text entry.
• Preview: Shows the message before it is sent.
Section 7: Messaging
79
Section 7
Options to display a pop-up
3. Press the right soft key
menu that provides the following options:
• Save as Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at
the assigned delivery date and time.
• Remove PIX/FLIX: Removes the selected PIX/FLIX from the
message.
• Remove Sound: Removes the sound attached from the
message.
• Remove Name Card: Removes the attached name card
from the message.
4. Press the left soft key
Add to select from the following
options:
• Contacts: Choose a number from your contacts list or select
the right soft key to select from the Groups menu.
• Recent Calls: Choose a number from the recent calls list.
• To PIX Place: Send the message to the PIX Place.
5. Press
once you’ve finished entering the phone
number(s) or email address(es).
6. In the Text field, compose your message.
Section 7
7. Press the down navigation key to highlight the PIX/FLIX
field. Press the left soft key
Gallery to add a PIX/
FLIX, and follow the prompts. Press
to attach the
highlighted object.
80
Receiving PIX/FLIX Messages
8. Press the up/down navigation key to highlight the Sound
field. Press the left soft key
Sounds to select a sound.
Press the up/down navigation key to highlight the
desired sound and press
.
9. Press the up/down navigation key to highlight the
Subject field. Press the left soft key
Abc to change
entry mode. Press the right soft key
Options to Add
Quick Text. Press the up/down navigation key to
highlight the desired Quick Text phrase, and press
.
10. Press the down navigation key to add Name Card. Press
the left soft key
Add to select My Name Card or an
entry from your Contacts list. Follow the prompts and
press
to insert.
11. Once all fields are complete, press
message to the intended recipient(s).
to send the
Receiving PIX/FLIX Messages
When you receive a new PIX/FLIX Msg, NEW PIX/FLIX
MSG appears in the display along with the options View
Now, View Later or Reject.
Note: For the option Reject to appear in the display when you receive a
PIX/FLIX Msg, Auto Receive mode must be set to Off in the Message
Settings menu.
2. After downloading, the image (and text if any) contained
in the PIX/FLIX Msg appear in the display.
Section 7: Messaging
81
Section 7
1. When you receive a new PIX/FLIX Msg, press
DOWN. Downloading... appears in the display.
3. Use the navigation keys to scroll through the message or
view the entire picture if necessary.
Note: When viewing a PIX/FLIX message, you can view the previous PIX/
FLIX message by pressing the left navigation key and view the next PIX/
FLIX message by pressing the right navigation key.
Receive Messages While in a Call
When you receive a message while in a call, the NEW PIX/
FLIX MESSAGE dialog box appears in the display. Press
to clear. You can view the message without
disconnecting your call by pressing
Options and then
selecting Message.
Reject a PIX/FLIX Msg
Note: For the option Reject to appear in the display when you receive a
PIX/FLIX Msg, Auto Receive mode must be set to Off in the Message
Settings menu.
This feature is currently unavailable outside of the United States.
1. When you get notification to view a new PIX/FLIX Msg
that you don’t want to receive, press the down
navigation key to highlight Reject.
2. Press
to reject.
View a PIX/FLIX Msg Later
Section 7
1. When you receive a new PIX/FLIX Msg that you would
like to view later, highlight View Later and press
.
2. To view the message, press the left soft key
Message,
Inbox.
82
New Handwritten Messages
3. Use the navigation key to highlight the unopened
message, then press
OPEN. The MESSAGE INFO
screen appears first if the Auto Receive option is Off. If
so, press
DOWN to view PIX/FLIX message.
New Handwritten Messages
You can convert a picture of a handwritten message to a
sketch that can be sent with a message. For information
on taking a picture see "Take PIX" on page 126. For
information on sending the message, see "Creating and
Sending PIX/FLIX Messages" on page 79.
Message Folders
Your phone provides default message folders for your
Text and PIX/FLIX messages.
Note: To quickly view all messages in the Inbox, Sent, or Drafts folders,
open one message and then press the right navigation key to view the next
message or press the left navigation key to view the previous message.
Inbox
Received messages of all types are stored in the Inbox
folder.
1. In standby mode, press the left soft key
Message
then press
Inbox. Or in standby mode, press
MENU and use the left navigation key to highlight
MESSAGING then press
Inbox.
Section 7: Messaging
83
Section 7
2. Use the navigation key to highlight the message that you
wish to view.
3. Press
OPEN to view contents of the highlighted
message.
4. While viewing a message press the right soft key
Options to display the options listed.
Play Again: Replays the PIX/FLIX message.
Forward: Forward the message to another recipient.
Erase: Pop-up prompts with Yes or No for deletion.
Save PIX/FLIX: Saves the picture sent in the message to
My PIX.
• Save Sound: Saves the sound received with the message.
• Save Quick Text: Saves the text received in the message to
•
•
•
•
the Quick Text list.
• Save Name Card: Saves the name card received in the
message.
• Add To Contacts: Save the number of the sender to your
Contacts as a new entry or add to an existing entry.
• Lock: Locks the message to prevent deletion.
• Message Info: Provides the following information: From and
Callback Number, Priority, Msg Type, Size and if a Graphic,
Sound or Name Card were included in the message.
5. From the Inbox menu, press the left soft key
Erase to
delete the message from the Inbox. Highlight Yes to
delete, or No to return to the Inbox menu.
Section 7
6. Press the REPLY key to return a message to the sender.
Note: When Auto Erase is turned on, the oldest read TXT message is
replaced by an incoming TXT message when 50 TXT messages are stored
in the Inbox, and the oldest read PIX/FLIX message is replaced by an
incoming PIX/FLIX message when 10 PIX/FLIX messages are stored in the
84
Message Folders
Inbox. See ‘Changing Message Settings” on page 88 for information on
how to set Auto Erase and Auto Receive.
Sent
Your phone stores messages in the Sent folder, regardless
of whether the message was successfully transmitted.
Verify if and when a message or e-mail was successfully
transmitted by enabling the Enh. Delivery Ack feature in
Message Settings.
Review Messages in the Sent Folder
1. In standby mode, press the left soft key
Message
then press
Sent. Or in standby mode, press
MENU and use the left navigation key to highlight
MESSAGING then press
Sent.
2. Use the navigation key to highlight the message that you
wish to review, then press
OPEN.
3. While viewing the message, press the right soft key
Options to display the options listed.
• Forward: Forwards the message to another recipient.
• Play Again: Replays the PIX/FLIX message.
• Resend: Resends the message to the original recipient.
• Erase: Deletes the message.
• Add To Contacts: Adds the sender’s information to your
Section 7: Messaging
85
Section 7
contact list.
• Lock/Unlock: Locks the message to prevent deletion.
• Save Quick Text: Saves the text sent in the message to the
Quick Text list.
• Message Info: Provides the following information: TO
Number, Priority, Msg Type, Size and if a Graphic, Sound or
Name Card were included in the message.
4. Use the navigation key to highlight the desired option.
5. Press
option.
to perform the function for the highlighted
6. From the Sent menu, press the left soft key
Erase to
delete the message from the Sent folder. Highlight Yes to
delete, or No to return to the Sent menu.
Drafts
Draft messages are those that have been composed but
never sent. You can return to the Drafts folder at any time
to view, edit, or send a draft message.
Create a Draft Text Message
1. In standby mode, press the left soft key
Message
then press
New TXT Msg. Or in standby mode,
press
MENU and use the left navigation key to
highlight
MESSAGING then press
New TXT
Msg.
2. Enter the phone number of the recipient, then press the
down navigation key.
Section 7
3. Compose your message using the keypad, then press
the right soft key
Options. A pop-up menu appears
in the display.
4. Scroll down with the navigation key until Save As Draft
is highlighted, then press
. A confirmation message
appears in the display and your message is saved to the
Drafts folder.
View and Edit Draft Messages
1. In standby mode, press the left soft key
86
Message
Message Folders
then press
Drafts. Or in standby mode, press
MENU and use the left navigation key to highlight
MESSAGING then press
Drafts.
2. Use the navigation key to highlight the message that you
wish to view, then press
EDIT. The message opens
in the Text field with the message text displayed.
3. Press the CLR key
to backspace and delete any
current characters in the display, if desired. Press and
hold
to erase all characters in the field.
4. Press the right soft key
Options. A pop-up menu
appears in the display with the options listed.
• Add: Add information from the following categories.
• Graphics: Lists all graphics pre-loaded and downloaded.
• Animations: Lists all animations pre-loaded and
Section 7: Messaging
87
Section 7
downloaded.
• Sounds: Lists all sounds pre-loaded and downloaded.
• Quick Text: Choose from up to 12 pre-loaded messages.
• Name Card: Allows you to add your name card or the name
card of one of your contacts.
• Edit Text Format: Allows you to edit the text size,
alignment, style, color, and background color.
• Save as Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal
priority.
• Callback #: Provides the ability to send a callback # when
sending a message.
• Validity Period: Save the message for the assigned period
of time.
• Deferred Delivery: Save the message to be delivered at
the assigned delivery date and time.
• Enh. Delivery Ack: Displays a pop-up screen notifying the
message sent has been received.
5. Use the navigation key to highlight the desired option.
Press
to perform the function for the highlighted
option.
6. Once you’ve returned to the message composer, press
to send the message, if desired.
Erase Options
You can erase unlocked messages in your Inbox, Drafts
folder, or Sent folder. Locked messages are not erased.
To erase messages:
1. In standby mode, press
MENU, then press the left
navigation key to highlight
MESSAGING, then press
the right soft key
Options.
2. The following options are available:
• Erase Inbox: Erases unlocked messages in your Inbox.
• Erase Drafts: Erases unlocked messages in your Drafts
folder.
• Erase Sent: Erases unlocked messages in your Sent folder.
Changing Message Settings
This menu allows you to define settings for messages sent
or received on your phone. To access your message
settings, use the following steps:
Section 7
1. In standby mode, press
MENU, then press the left
navigation key to highlight
MESSAGING, then press
the left soft key
Settings. Or press the left soft key
Message and press the left soft key
Settings.
88
Changing Message Settings
2. Use the navigation keys to access the following options:
• Auto Save: Saves all messages sent. Use the navigation
keys to select On, Off, or Prompt.
• Auto Erase: Erases the oldest message of the same type
(TXT or PIX/FLIX) when the maximum number of received
messages of that type is exceeded in the Inbox. For
example, the oldest read TXT message is replaced by an
incoming TXT message when 50 TXT messages are stored in
the Inbox, and the oldest read PIX/FLIX message is replaced by
an incoming PIX/FLIX message when 10 PIX/FLIX messages are
stored in the Inbox. Choose from On or Off.
• Auto View TXT: Automatically displays the text message
when received. Choose from On or Off.
• Auto Receive: Automatically receives messages into your
Inbox. Choose from On or Off.
• Signature: Adds the signature text to each message sent.
Choose from None or Custom.
• Callback #: Displays the callback number in the text
message. Choose from On or Off.
• Voice Mail #: Enter the speed dial entry set for your
voicemail.
• Entry Mode: Sets the default entry mode for messaging.
Choose from Word, Abc, ABC, or 123.
• Quick Text: Displays the Quick Text pre-defined entries for
Text Msg and PIX/FLIX Msg. Press the right soft key
Section 7: Messaging
89
Section 7
New to add to the Quick Text list. Enter your new text and
press
. The new Quick Text item shows in the first
position of the list.
• Text Auto Scroll: When enabled, advances body text
automatically one line at a time.
Voicemail
New voicemail alerts are sent via an SMS text message.
These messages indicate how many new and urgent
voicemails are in your box. Open the text message to view
the number of new and urgent voice messages in your
voicemailbox. If a caller leaves a callback number, this
number will also be sent via an SMS text message.
Receive Voicemail Messages
When you receive a new voicemail message you’ll hear a
sound and an SMS text message appears in the display.
1. Press the up/down navigation keys to select Listen Now
or Listen Later.
2. Press
.
View Voicemail Messages in the Inbox Folder
1. In standby mode, press
MENU, then press the left
navigation key to highlight
MESSAGING, press
Voicemail. Or press the left soft key
Message and
press
Voicemail.
2. Press
OPEN to dial voicemail and retrieve your
message(s).
E-Mail
This menu allows you to send and receive E-Mail using
Mobile Web. To use your E-Mail, follow these steps:
Section 7
1. In standby mode, press
navigation key to highlight
E-Mail.
90
MENU, then press the left
MESSAGING, then press
Mobile IM
2. Using the up and down navigation keys, select one of the
following E-Mail providers and press
.
•
•
•
•
MSN Hotmail
AOL Mail
Yahoo! Mail
Find More
3. Use the on-screen application specific functions and
options to use the E-Mail applications.
Mobile IM
The Instant Messaging function allows you to send and
receive instant messages using one of the following
communities:
• AOL® Instant Messenger TM
• MSN® Messenger Service
• Yahoo!® Messenger
Note: You must first create the Instant Message account before accessing
it on your phone.
Using Mobile IM
1. In standby mode, press the left soft key
2. Highlight Mobile IM and press
Message.
.
3. Select your instant message community using the left
and right navigation keys and press
.
Section 7
4. Use the on-screen application specific functions and
options to use the instant message applications.
Section 7: Messaging
91
Chat
You have the ability to join wireless chat rooms from your
phone. Send messages including text and icons to many
chat room participants or launch one-on-one (private)
chat rooms.
To access a chat room from the browser:
1. In standby mode, press
navigation key to highlight
Chat.
MENU, then press the left
MESSAGING, then press
2. Mobile Web is launched. Using the up and down
navigation keys, select one of the following chat rooms
and press
.
•
•
•
•
•
•
UPOC CHAT
LAVALIFE
AIRDATE
LIFESTYLE
JUMBUCK
FIND MORE
Section 7
3. Use the on-screen application specific functions and
options to use the Chat applications.
92
Section 8: Changing Your Settings
Section 8
Topics Covered
• My Account
• Tool Settings
• Sound Settings
• Display Settings
• System Settings
• Call Settings
• Clock Format
• Ringer ID
• Picture ID
• Bluetooth Settings
This section explains the sound and phone settings for
your phone. It includes display settings, security
settings, Bluetooth settings, call settings, and other
settings associated with your phone.
Section 8: Changing Your Settings
93
Section 8
My Account
The My Account menu connects to the VZW Mobile Web.
You can setup Favorites or choose from the available
applications.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
My Account. The menus are listed in the
display.
2. Use the navigation keys to make your selection and
press
. Follow the on-screen instructions.
Tool Settings
The Tools menu provides the ability to access the
following menus:
• Calendar: For more information see, "Calendar" on page 136.
• MP3 Player: For more information see, "MP3 Player" on page
138.
• Alarm Clock: For more information see, "Alarm Clock" on page
141.
• World Clock: For more information see, "World Clock" on page
144.
• Notepad: For more information see, "Notepad" on page 144.
• Calculator: For more information see, "Calculator" on page
146.
• Voice Services: For more information see, "VoiceSignal" on
page 36.
• Shortcut Key: Shortcut List allows you to select from up to
eleven applications that appear in the display when you press
the up navigation key in standby mode.
94
Sound Settings
1. In standby mode, press
navigation key to highlight
Tools.
3. Press
Short Cut Key.
4. A list of menus appears in the display, use the
navigation key to highlight the desired menu, then press
. The shortcut is added to the list.
Sound Settings
The Sounds menu provides the ability to access the
following menus:
Master Volume
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Sounds. The Sounds menus are listed in the
display.
2. Press
Master Volume.
3. Use the Up and Down navigation keys to adjust the
volume. Press the Play soft key to hear the volume.
4. Press
SET to save.
Call Sounds
Ringer Settings
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Sounds. The Sounds menus are listed in the
display.
Section 8: Changing Your Settings
95
Section 8
2. Press
MENU, use the right
SETTINGS & TOOLS.
2. Press
Call Sounds. Press
Available options are:
Call Ringtone.
Section 8
• My Ringtones: You can get new ringtones from the
web or choose from the list.
• My Sounds: You can record new sounds to use or
choose from the list.
3. Press
Call Vibrate to set the Call Sounds to vibrate.
4. Press
to save the setting. The phone returns to the
Call Sounds menu.
Alert Sounds
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Sounds. The Sounds menus are listed in the
display.
2. Press
Alert Sounds. For the following options, you
can set the tone for the message alerts. You can also set
vibration on and set a reminder.
• TXT Message
• PIX-FLIX Message
• Voicemail Message
Keypad Volume
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Sounds. The Sounds menus are listed in the
display.
2. Press
Keypad Volume.
3. Use the Up and Down navigation keys to adjust the
keypad volume.
96
Sound Settings
4. Press
SET to save.
Earpiece Volume
2. Press
Earpiece Volume.
3. Use the Up and Down navigation keys to adjust the
keypad volume.
4. Press
SET to save.
Service Alerts
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Sounds. The Sounds menus are listed in the
display.
2. Press
Service Alerts. For the following options, you
can the Service Alert On or Off.
• ERI
• Minute Beep
• Call Connect
Power On/Off
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Sounds. The Sounds menus are listed in the
display.
2. Press
Power On/Off. You can set the sounds for
Power On and Power Off to either On or Off.
Section 8: Changing Your Settings
97
Section 8
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Sounds. The Sounds menus are listed in the
display.
Section 8
Display Settings
The Display menu affects the menu style, standby mode
animation, backlight settings, and more.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display.
• Banner: Create your own personalized greeting that appears
•
•
•
•
•
•
in the display when your phone is in standby mode or choose
the ERI Banner which displays the network in which you have
subscribed.
Backlight: Choose settings for the LCD or Keypad.
Contrast: Choose the contrast level for the Front LCD.
Wallpaper: Choose PIX (Pre-loaded or personal) or FLIX to
use as the background display for your Main LCD. You may
only choose from your personal PIX or pre-loaded PIX for the
Front LCD.
Display Theme: Choose from 6 preset colors used for
menu display.
Power On/Off Animation: Choose the media that appears
in the display when you turn the phone on and off.
Service LED: Turns on the service light (LED) on or off during
service.
2. Use the navigation key to highlight the display menu that
you wish to edit, then press
.
3. Use the navigation key to select from the menu options
that appear in the display, then press
. Your settings
are saved.
98
Display Settings
Banner
To create a personal banner:
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Banner.
2. Press
handset.
Note: Press and hold
to create a Personal Banner for your
to erase an existing banner, if necessary.
3. Enter a word or short phrase (18 characters or less) to
appear in your phone’s display when the phone is in
standby mode.
4. Press
to save the new banner.
To create an ERI banner:
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Banner.
2. Press
to set the ERI Banner for your handset.
3. Select On or Off and press
to save the new setting.
Section 8: Changing Your Settings
99
Section 8
Banner allows you to create your own personalized
greeting that appears in the display while your phone is
in standby mode. Or you can display the network to
which you are subscribed.
Section 8
Backlight
Set the backlight for the display or keypad to remain on for
a specified period of time or to remain on as long as the flip
is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Backlight. The menus listed appear
in the display.
• Display: The following options are for the Main LCD.
• Duration: Can be set to 5 seconds, 15 seconds, 30 seconds,
Always On, or Always Off.
• Brightness: Use the Navigation keys to adjust the
brightness.
• Keypad: The following options are for the keypad.
• 5 Seconds: The backlight is on for 5 seconds before it dims.
• 15 Seconds: The backlight is on for 15 seconds before it
dims.
• 30 Seconds: The backlight is on for 30 seconds before it
dims.
• Always On: The backlight is always on.
• Always Off: The backlight is always off.
2. Use the navigation key to highlight a menu.
3. Press
to enter the highlighted option’s menu and
change settings as desired.
100
Display Settings
Contrast
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Contrast. Front LCD appears in the
display.
2. Use the navigation key to highlight adjust the contrast for
the Front LCD, then press
.
Wallpaper
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Wallpaper. Main LCD and Front LCD
appear in the display.
2. Use the navigation key to highlight Main LCD or Front
LCD, then press
.
3. If you selected Main LCD, choose from the available
options of My PIX, My FLIX, and Pre-loaded PIX and
then press
. If you selected Front LCD, proceed to
step 5.
4. Follow the prompts to select the wallpaper that will
appear in the main LCD display while your phone is in
standby mode.
5. If you selected Front LCD, choose an image from the My
PIX or Pre-loaded PIX, then press
.
Section 8: Changing Your Settings
101
Section 8
Set the contrast for the front LCD to enhance the viewing
capability.
Section 8
Follow the prompts to select the wallpaper to appear in the Front LCD
while your phone is in standby mode.
Display Theme
Choose from 6 preset colors used for menu display.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Display Theme.
2. Use the navigation keys to highlight the Display Theme
you wish, then press
.
Power On/Off Animation
Animation allows you to choose the multi-media or
pictures that appear in your phone’s display when you
turn it on, turn it off, and while the phone is in standby
mode.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Power On/Off Animation.
2. Use the navigation key to highlight Power On or Power
Off, then press
.
3. Use the navigation keys to select from My FLIX or
Preloaded.
4. If you selected My FLIX, select Default Album then
choose from the available files. Press
to save
settings.
5. If you selected Preloaded, choose from the available
files, and press
to save settings.
102
System Settings
Service LED
Turns on the service light (LED) on or off during service.
2. Use the navigation keys to select On or Off, then press
.
System Settings
The System menu provides the ability to access the
following menus:
Device Info
The Device Info menu allows you to view the software
and hardware information, your assigned number, and
an icon glossary for your phone.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System Settings menus are
listed in the display.
2. Press
Device Info. My Number is highlighted.
Press
to display the Mobile Device and Identification
numbers.
3. Press
SW Version to view the software, PRL, ERI,
Browser, Get it Now, and Hardware versions available on
your phone.
4. Press
Icon Glossary to view the list of icons with a
brief description.
Section 8: Changing Your Settings
103
Section 8
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Display. The Display menus are listed in the
display. Press
Service LED.
5. Press
to return.
Section 8
Manage Memory
The Manage Memory menu allows you to set your Save
Options to Phone Memory or Card Memory. You can also
set the memory usage for pictures, videos, music, sounds,
ringtones, and voice memos on your phone and
TransFlash card.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System Settings menus are
listed in the display.
2. Press
Manage Memory. The following options are
available:
• Save Options: You can set your PIX, FLIX, Sounds, or All to
be saved to either phone memory or card memory.
• Phone Memory: Allows you to see memory usage of
everything stored on your phone.
• Card Memory: Allows you to see memory usage of
everything stored on your TransFlash card.
Language
Change the display language from English to Español or
vice versa using the Language menu.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System menus are listed in the
display. Press
Language.
2. Use the navigation key to select the language of your
choice, then press
.
104
System Settings
Location
The Location (GPS) setting identifies your location to the
network. You can fully enable this setting or set GPS to
work only in the case that you dial 911 from your phone.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System Settings menus are
listed in the display.
2. Press
Location. The Location screen displays.
• Location On: GPS location setting is on wherever the feature
is available.
• E911 Only: GPS location setting is on whenever you dial 911
only.
3. Use the navigation key to highlight an option.
4. Press
to select the highlighted setting.
Security
The Security menu allows you to lock your phone, enable
or disable voice privacy, set restrictions, and other
security options.
1. In standby mode, press
navigation key to highlight
Press
System.
MENU, use the right
SETTINGS & TOOLS.
2. Use the navigation key to highlight Security, press
.
3. Enter the lock code (factory settings are the last four
digits of your telephone number). The following options
display:
Section 8: Changing Your Settings
105
Section 8
Note: This feature is only available on the Verizon Wireless network.
Section 8
• Common Code: Common code On, uses a common
password for both device and location lock code. Common
code Off, uses separate passwords for both device and
location.
• Lock Mode: Allows you to lock the Device or Location.
• Edit Code: Allows you to change the Lock Code for the
Device or Location.
• Reset Phone: All settings (except Contacts) are reset to
factory default settings.
Lock Phone
Lock Phone restricts the use of your phone with the
exception of outgoing calls to 911. Lock Phone allows you
to answer calls, but to place calls (except to emergency
numbers) you have to unlock the phone.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System menus are listed in the
display. Press
Security. You’re prompted to enter
the lock code. The default lock code is the last four digits
of your telephone number.
2. Enter the Lock Code. Several security menus appear in
the display.
3. Press
Lock Mode. Use the navigation key to
highlight Device or Location. Press
. The following
options display:
• Unlock: If locked, unlocks the device or phone, depending on
your selection.
• Lock: Your phone returns to standby mode. The the Lock Code is
required immediately to access any functions.
106
System Settings
• On Power Up: The Lock Code is required whenever you
power up the phone.
to perform the function for the highlighted
Edit Lock Code
The default lock code is the last four digits of your phone
number. Edit Code allows you to change this code to a lock
code of your preference.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System menus are listed in the
display.
2. Press
Security. You’re prompted to enter the lock
code. The default lock code is the last four digits of your
telephone number.
3. Press
Edit Code. Two options are available Device
and Location. Use the navigation keys to highlight your
choice and press
.
4. At the “Enter New Lock Code” prompt, enter the new
lock code. You’re prompted to confirm the new lock
code.
5. “Device or Location Lock Code Changed” message
appears in the display confirming that your lock code has
been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Section 8: Changing Your Settings
107
Section 8
4. Press
option.
Section 8
Resetting Your Phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System menus are listed in the
display.
2. Press
Security, and enter the lock code. Press
Reset Phone. A prompt appears in the display asking if
you wish to restore default settings (except for the
Contacts).
3. Press Yes to restore default settings or press No to
return to the Security list.
Emergency #
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If you
call 911 an audible tone is heard and an emergency prompt appears in the
display for the duration of the call.
Important: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for
adequate signal strength before placing a call.
Call Emergency Numbers in Lock Mode
In Lock Mode, you can dial 911 to place an emergency call.
108
Call Settings
Note: If you dial 911, your phone dials the emergency number
immediately (no prompt).
The System Select menu allows you to set your roaming
options. For information on roaming options, see
"Roaming Options" on page 35.
NAM Selection
Your phone provides the option of selecting between two
NAMs (Number Assignment Modules) or phone
numbers. Select either NAM1 or NAM2.
Standalone Mode
With Standalone Mode on, all RF functions for your
phone are disabled, and you cannot use your phone to
place or receive calls.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
System. The System menus are listed in the
display.
2. Press
Standalone Mode. Use the Up or Down
navigation key to select On or Off and press
OK.
Call Settings
The Call Settings menu allows you to select the method for
answering incoming calls, setting redial options, setting
data rates for data calls, voice services, and more.
Section 8: Changing Your Settings
109
Section 8
System Select
Section 8
Answer Options
The Answer Options menu allows you to select the
method for answering incoming calls.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Call Settings. The Call Settings menus are
listed in the display.
2. Press
Answer Options. The following options
appear in the display:
• Flip Open: Calls are answered when the flip is
opened.
• Any Key: Calls are answered when any key is
pressed.
• Send Only: Calls are answered when the
key is
pressed.
• Auto Answer: Calls are answered automatically with
a 1, 3 or 5 second delay.
3. Use the navigation key to highlight the method you wish
to use for answering calls, then press
.
Auto Retry
Auto Retry automatically redials busy numbers after a
preset period of time.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Call Settings. The Call Settings menus are
listed in the display.
2. Press
Auto Retry. The following options appear in
the display:
110
Call Settings
Off
Every 10 Seconds
Every 30 Seconds
Every 60 Seconds
Section 8
•
•
•
•
3. Highlight an option and press
, or press
to
return to the Call Settings menu without making a
selection.
TTY Mode
Before you can use your phone with a TTY device, you’ll
need to enable TTY functions in the phone. See "TTY" on
page 36 for more information.
One Touch Dial
You can use this option to enable or disable the speed
dialing feature.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Call Settings. The Call Settings menus are
listed in the display.
2. Press
One Touch Dial. Select On or Off. Press
OK to save.
See "Speed Dialing" on page 71 for more information.
Voice Privacy
Note: This feature is only available on the Verizon Wireless network.
Voice Privacy (at the Enhanced setting) allows you to
prevent those you call from seeing your number in their
Section 8: Changing Your Settings
111
display when receiving your call. Voice privacy options
are Standard and Enhanced.
Section 8
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Call Settings. The Call Settings menus are
listed in the display.
2. Press
Voice Privacy. The menus listed appear in
the display. Standard and Enhanced appear in the
display.
3. Use the navigation key to highlight the Voice Privacy
option of your choice, then press
. Your settings are
saved.
Call Restrictions
Restriction allows you to restrict outgoing and incoming
calls. You can also restrict access to your Contacts list.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Call Settings. The Call Settings menus are
listed in the display.
2. Press
Call Restrictions.
3. Use the navigation key to select Outgoing Call,
Incoming Call, or Contacts, then press
.
4. Use the navigation key to highlight On or Off, then press
. Your settings are saved.
Data Settings
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Call Settings. The Call Settings menus are
112
Clock Format
listed in the display.
• Data Off: Phone operates in normal voice call mode.
• Data For Next Call: Data call is enabled for next call only.
Phone will reset to Data Off mode after call.
• Data Until Powered Off: Phone will remain in Data Mode
until phone is powered off.
DTMF Tones
Use this menu to set DTMF settings to Normal, Long, or
Off.
Clock Format
This menu allows you to have time displayed in digital or
analog format.
Main Clock: Set to Digital, Analog, or Off
Front Clock: Set to Set to Digital, Analog, or Off
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Clock Format. The Clock Format menus are
listed in the display.
2. Press
Main Clock or
Front Clock. The
following options appear in the display. Highlight one of
the following options and press
to save.
• Digital: Time appears in digital format, for example,
12:54pm.
• Analog: Time is represented as a clock.
• Off: No time is displayed.
Section 8: Changing Your Settings
113
Section 8
2. Press
Data Settings. The following options appear
in the display. Highlight one of the following options and
press
.
Section 8
Ringer ID
The Ringer ID menu allows you to set the Ringer ID option
to On so that you can associate different ringtones with
different numbers. See "Get Tunes & Tones" on page 121
for more information.
Picture ID
The Picture ID menu allows you to set the Picture ID
option to On so that you can associate a picture with a
Contact. See "Take PIX" on page 126 for more information.
Bluetooth Settings
About Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over a
distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to
beam information with Bluetooth. If the devices are
within a range of one another, you can exchange
information between them, even if they are located in
different rooms.
Note: For optimal user experience when using the Bluetooth earpiece,
enable the Key/EarMic option in the Voice Services Voice Dial menu. This
will allow you to place calls with a Bluetooth earpiece using the Voice Dial
feature in hands-free mode.
Bluetooth Service Profiles
Actually, the Bluetooth specification is a protocol that
describes how the short-range wireless technology
114
Bluetooth Settings
Your phone supports the following profile service:
• HSP: Mono-headset profile
• Bluetooth handsfree kit support *
* For vehicle/accessory compatibility, go to www.verizonwireless.com/bluetoothchart
Phone does not support Bluetooth OBEX profiles.
The following Bluetooth options are available:
On/Off
When the Bluetooth radio is turned on, you can use the
Bluetooth features available. When the Bluetooth radio is
turned off, you cannot send or receive information via
Bluetooth. To save battery life or in situations where radio
use is prohibited, such as airline traveling, you can turn off
the Bluetooth wireless technology.
1. In standby mode, press
MENU key and use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Bluetooth. The Bluetooth menus are listed
in the display.
2. Press
Note: If activated, the
On/Off to enable or disable Bluetooth.
Bluetooth icon displays.
3. Select On to activate or Off to de-activate.
4. Press
to save changes.
Section 8: Changing Your Settings
115
Section 8
works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the
chance that different devices will not work together.
Section 8
Search
This option searches for a recognized Bluetooth wireless
technology device.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Bluetooth. The Bluetooth menus are listed
in the display.
2. Press
Search. Press
All Devices to search for
any active Bluetooth wireless technology device (laptop
or headset) or press
Audible Device for the
Bluetooth wireless technology headset or the hands-free
car kit headset.
Note: If you have NOT already activated Bluetooth on the phone, the
message “BLUETOOTH IS NOT ACTIVATED. BLUETOOTH TURN ON?”
displays. Highlight Yes to activate or No to exit and press
.
3. A list of found Bluetooth devices will be displayed. Use
the Up and Down navigation keys to highlight a
Bluetooth device. Press
to select the device.
4. A message will ask “CONNECT TO (device name) ?”.
Highlight Yes to connect or No to cancel and press
5. To finish connecting, enter the passkey (0000 for most
devices) and press
to pair with the device you
selected.
Disconnect
This menu provides the option to disconnect the
Bluetooth connection. To disconnect, use the following
procedures:
116
.
Bluetooth Settings
Section 8
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Bluetooth. The Bluetooth menus are listed
in the display.
2. Press
Disconnect. If you have an active Bluetooth
connection, a message will say “(device name) IS
CONNECTED. DISCONNECT?”. Highlight Yes to
disconnect or No to cancel and press
.
Registered List
This menu provides a list of Bluetooth wireless
technology devices accessed by your handset. To view the
registered list, use the following procedures:
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Bluetooth. The Bluetooth menus are listed
in the display.
2. Press
Registered List. A list of previously accessed
devices displays.To connect or disconnect a device,
highlight the device and press
.
3. If you are already connected to the device selected, a
message “DISCONNECT FROM (device name) ?”
displays. Highlight Yes to disconnect or No to cancel and
press
.
If you are not connected to the device selected, a
message “CONNECT TO (device name) ?” displays.
Highlight Yes to connect or No to cancel and press
.
Note: If the device that you selected is unavailable (e.g. it is paired with
another Bluetooth device), a message “UNABLE TO CONNECT WITH (device
Section 8: Changing Your Settings
117
Section 8
name). RETRY?” displays. Highlight Yes to retry or No to cancel and press
.
Bluetooth Settings
The Bluetooth wireless technology settings menu
provides the ability to view and change the device name,
show the visibility, and set the security for the device.
1. In standby mode, press
MENU, use the right
navigation key to highlight
SETTINGS & TOOLS.
Press
Bluetooth. The Bluetooth menus are listed
in the display.
2. Press
Bluetooth Settings. The Bluetooth menu
displays with the following options:
• My Device Name: shows the handset name. To modify,
enter the text and press
.
• Visibility: allows other users to see your accessibility. Select
On for other devices to see your device, or Off for no visibility.
• Security: allows you to set the set the security to High or
Low.
118
Section 9: Multimedia
Topics Covered
• Get It Now
• Get Tunes & Tones
• Get PIX & FLIX
• Get Fun & Games
• Get News & Info
Section 9
• Get Going
This section describes how you receive tunes, tones,
images, games, news and information. You can also take
and send pictures and video from your phone.
Section 9: Multimedia
119
Get It Now
The Get It Now menu provides sub-menus to GetTunes
& Tones, Get PIX & FLIX, Get Fun & Games, Get News &
Info, and Get Going. You can also view memory info to see
how much space you’ve used (and have left) for stored
media. Use the following steps for each GET IT NOW
sub-menu.
Section 9
1. In standby mode, press
navigation key to highlight
right soft key
Info.
MENU, use the left
GET IT NOW. Press the
Note: you can directly access the GET IT NOW menu by pressing the right
navigation key while in standby mode.
2. Press
App. Memory to display the memory
available. Press the
key to return.
3. Press
Content Memory to view the memory used
for the following items. Press the
key to return.
•
•
•
•
•
My Ringtone
My Sound
My PIX
My FLIX
Applications
4. Press
View Log to see the file transfer activity.
Press the
key to return.
5. Press
Help to display a list of frequently asked
questions. Use the navigation key to highlight an item
and press
to display help text. Press the
key to
return.
120
Get Tunes & Tones
Get Tunes & Tones
This menu allows you to get new, record new, and set
tunes and tones as your ringtone. It also allows you to
access your MP3 files.
Get New Ringtones
This menu allows you to get new, record new, and set your
ringtone.
2. Highlight
Get New Ringtones and press
.
My Ringtones
1. In standby mode, press
MENU, use the left
navigation key to highlight
GET IT NOW. The Get
Tunes & Tones menu is highlighted, press
.
2. Highlight
My Ringtones and press
.
3. Select
Get New Ringtones to access the web to
download new ringtones. Or if you have already
downloaded ringtones, highlight your selection and press
.
My MP3s
1. In standby mode, press
MENU, use the left
navigation key to highlight
GET IT NOW. The Get
Tunes & Tones menu is highlighted, press
.
2. Highlight
My MP3s and press
.
Section 9: Multimedia
121
Section 9
1. In standby mode, press
MENU, use the left
navigation key to highlight
GET IT NOW. The Get
Tunes & Tones menu is highlighted, press
.
3. The MP3 Player opens with a list of music files available
on the TransFlash memory card. Refer to "MP3 Player"
on page 138 for more information on how to play your
music files.
My Sounds
1. In standby mode, press
MENU, use the left
navigation key to highlight
GET IT NOW. The Get
Tunes & Tones menu is highlighted, press
.
2. Highlight
My Sounds and press
Section 9
3. Record New is highlighted. Press
Voice Memo screen.
.
launch the New
4. Press
REC to begin recording. Press
STOP to
stop. Press the left soft key
to pause and resume the
recording appropriately.
5. Press
to save sound.
Get PIX & FLIX
This menu allows you to get new PIX and FLIX from the
internet or take new PIX or FLIX using your phone’s
camera. You can also view the saved pictures.
Get V CAST Video
V CAST, the next generation wireless technology that
unveils a whole new multimedia experience at your
fingertips, provides access to vibrant, full-color content
from some of the biggest names in entertainment. V CAST
is your link to video on demand, which allows you to
view or download video clips that contain breaking news,
sports highlights, weather and more.
122
Get PIX & FLIX
For additional information regarding V CAST Video and
its use, see www.verizonwireless.com.
Note: To access and download videos, you must have the
displayed.
icon
Browsing, Selecting and Playing Video Clips
1. In standby mode, press
navigation key to highlight
Get PIX & FLIX and press
MENU, use the left
GET IT NOW. Highlight
.
.
3. Use the up or down navigation keys to highlight the
V CAST Video category you want.
4. After choosing the category you want press
.
Choose a sub category, if applicable, by using the
navigation keys or by entering the short-cut key number
and press
.
5. Use the navigation key to highlight a video. You may
press the right soft key
Options to read the
description of the video clip.
6. To view the highlighted video, press
VIEW.
7. Highlight Yes to accept charges, if applicable, and then
press
. After connection and buffering occurs, the
video clip begins.
Downloading a Video Clip
1. Launch V CAST Video and select a video you want to
save. For information about launching your video player
and choosing a video clip, review steps 1-5 of the
Section 9: Multimedia
123
Section 9
2. The Get V CAST Video option is highlighted. Press
previous section, “Browsing, Selecting and Playing Video
Clips” above.
2. To download and save the highlighted video, press
SAVE. The video clip will be saved to V CAST Video in
My FLIX.
3. Highlight Yes to accept charges, if applicable, and then
press
. The video download begins.
4. Once the download is completed, “Download
Complete. Play video now?” appears in the display.
Section 9
5. Select Yes and press
to view the video, or select No
to return to the V CAST Video menu.
Note: Not all video content available can be downloaded to your phone;
however, all content is available for viewing.
Deleting Video Clips
1. Launch V CAST Video. For information about launching
your video player, review "Get New PIX" on page 126.
2. Press the right soft key
highlighted.
3. Press
Options. My Clips is
. The clips you have downloaded are listed.
4. Use the navigation key to highlight the video you want to
erase and press the right soft key
Options. Erase is
highlighted.
5. Press
. Highlight Yes when the confirmation screen
displays, then press
.
124
Get PIX & FLIX
Using the Video Gallery
The video clips you save are stored in a folder named
V CAST Video in My FLIX. You can access this folder
without launching the V CAST Video application and
delete your saved video clips directly.
1. In standby mode, press
navigation key to highlight
PIX & FLIX.
2. Press
MENU, use the left
GET IT NOW. Press Get
My FLIX.
4. Use the navigation key to highlight the video you want to
delete and press the right soft key
Options.
5. Use the navigation key to highlight Erase and then
press
.
6. Highlight Yes to confirm that you want to erase the saved
clip, then press
.
Configure Alerts for New Video Clips
1. Launch V CAST Video. For information about launching
your video player, review "Get New PIX" on page 126.
2. Use the right and left navigation keys to select the
V CAST Video categories you want to configure an alert.
3. Choose a sub category if applicable, then press the right
soft key
Options.
4. Highlight Alerts and press
.
5. Highlight Configure alerts and press
.
6. Select the alert content you want, and press
Section 9: Multimedia
.
125
Section 9
3. Use the navigation key to highlight V CAST Video, then
press
.
7. After reading terms, highlight Save to accept and press
, or highlight Cancel to decline and press
.
Note: Fees apply for text messages/alerts both sent and received.
Get New PIX
1. In standby mode, press
navigation key to highlight
Get PIX & FLIX.
MENU, use the left
GET IT NOW. Press
Section 9
2. To get new PIX press
Get New PIX. Press
Get
New App. You are connected to the internet. Follow the
on-screen prompts.
Take PIX
This menu launches the camera.
1. In standby mode, press
navigation key to highlight
Get PIX & FLIX.
2. Press
MENU, use the left
GET IT NOW. Press
Take PIX. The camera is now active.
3. Press the right soft key
Options, to choose the
specific camera settings. Use the right/left navigation
keys to advance to each setting category, and the up/
down navigation keys to make selections within each
category. The following categories are available:
•
•
•
•
126
Flash: Auto, Off, On This Shot, Always On
Self Timer: Off, 5 Sec., 10 Sec.
Multi-Shot Mode: Series Shot, Divided Shot, Auto/Manual
Quality: Fine, Normal, Economy
Get PIX & FLIX
• Resolution: (1280X960), (640X480), (320X240),
(160X120) and Picture ID
Note: Resolution must be set to Picture ID or a size smaller than 320x240
to attach a picture to a Contact in the phone.
4. Press and hold
TAKE to capture a picture. Press the
right soft key
Erase to delete it or press the left soft
key
Save. The picture is now saved to the Gallery.
5. To exit the camera, press the
key.
PIX Gallery
1. In standby mode, press
navigation key to highlight
Get PIX & FLIX.
2. Press
MENU, use the left
GET IT NOW. Press
Take PIX. The camera is now active.
3. Press the left soft key
My PIX to review the albums.
The My PIX menu displays with Default Album
highlighted.
Section 9: Multimedia
127
Section 9
• White Balance: Auto, Sunny, Cloudy, Tungsten,
Fluorescent, and Manual
• ISO: Auto, ISO 100, ISO 200, ISO 400
• Color Effects: Normal, Black & White, Antique, Solarize,
Posterize, Negative
• Metering: Average, Center, Spot
• Settings: Memory (store PIX to phone or TransFlash card),
Auto Save, Icon Display, Ready Sound, Shutter Sound
• Camcorder: Switches from Camera to Camcorder
4. Press the right soft key
Options to view your pictures
in a Slide Show, or to Lock the pictures from deletion.
Highlight your selection and press
. Press
PAUSE or the left soft key
Done to return.
5. From the My PIX menu, press
to view the
highlighted picture. Press
VIEW. Press the right soft
key
Options to select from the following options:
Section 9
•
•
•
•
Send: Launches the Create PIX/FLIX Msg screen.
To PIX Place: Transfers the file to the online gallery.
Get New: Launches the internet to get online pictures.
Set As: Set the picture as the main wallpaper, front wallpaper,
or Picture ID.
• Create Postcard: Adds text to a picture selected from the
PIX Gallery.
• Rename: Allows you to rename the picture.
• Move: Moves the images from the card to the phone.
• Lock: Locks the picture to prevent deletion.
• Erase: Erases the selected picture from the gallery.
• Erase All: Erases all pictures from the gallery.
• PIX Info: Provides the date, time, location, resolution, size
and rights to the selected picture.
6. Use the navigation key to make your selection and press
.
Take FLIX
This menu launches the camcorder.
1. In standby mode, press
navigation key to highlight
Get PIX & FLIX.
128
MENU, use the left
GET IT NOW. Press
Get PIX & FLIX
2. Press
Take FLIX. The camcorder is now active.
Press the right soft key
Options to select from the
following options:
3. Press
to save the settings.
4. Press
REC to begin recording. Press the left soft key
Pause or
STOP.
5. Press the right soft key
Save.
Erase or the left soft key
6. To exit the camcorder, press the
key.
Note: If you receive an incoming call while using your camcorder, the video
recording is stopped. You will be presented with the call Ignore / Accept
screen. If you ignore the call, then you are given the choice to Save, Play or
Erase the video. If you accept the call, then your video is auto-saved and
the camcorder application exits in the background.
Section 9: Multimedia
129
Section 9
• Recording Mode: Limit for MMS (to record up to a 15
second clip to attach to a PIX/FLIX message), Normal (to record
video with length up to 10 minutes at a time).
• Flash: Auto, Off, On This Shot, Always On.
• Self Timer: Off, 5 Sec., 10 Sec.
• Quality: Economy, Normal, or Fine. Recording Mode must be
set to Normal for Quality options Normal and Fine to appear.
• White Balance: Auto, Sunny, Cloudy, Tungsten,
Fluorescent, Manual.
• Color Effects: Normal, Black & White, Antique.
• Settings: Memory (store FLIX to phone or TransFlash card),
Auto Save, Icon Display.
• Camera: Switches from camcorder to camera.
Note: If the battery level becomes too low while you are recording, the
recording is stopped and the video is auto-saved. The low battery indicator
will be displayed and you will exit from the camcorder application. If your
battery is too low then the phone will power down without saving the video.
Section 9
Note: If you receive a text message, a multi-media message or a voice mail
while you are recording, the video recording is stopped. You are given the
choice to View Now or View Later. If you choose later, you are given the
chance to Save, Play or Erase the video. If you want to view the message
now, the video is auto-saved and the camera application exits in the
background.
My FLIX
This menu allows you to review the videos you have taken
or downloaded and stored into your phone and/or
TransFlash card.
1. In standby mode, press
navigation key to highlight
Get PIX & FLIX.
2. Press
MENU, use the left
GET IT NOW. Press
My FLIX. Default Album is highlighted.
3. Press
to view the FLIX in thumbnail mode. Press the
navigation key to highlight the desired video clip and
press
PLAY to play the selected video.
4. After playing the video, press the CLR key
to the thumbnail view.
to return
5. Press the right soft key
Options for the following
options. Highlight an option and press
to make your
selection.
• Send
• To PIX Place
130
Get Fun & Games
•
•
•
•
•
•
•
•
Get V CAST Video
Set As
Rename
Move
Lock
Erase
Erase All
FLIX Info
PIX Place
Note: You must first setup your account on the Verizon Wireless website:
www.verizonwireless.com before establishing a connection.
1. In standby mode, press
navigation key to highlight
Get PIX & FLIX.
MENU, use the left
GET IT NOW. Press
2. Highlight PIX Place and press
on screen displays.
. The PIX Place sign-
3. Enter your Mobile Number and Password. Use the
navigation key to highlight LOGIN and press
. You
are now connected to your online album.
Get Fun & Games
Select from several fun and interesting applications or a
broad category of games that you can play on your phone.
1. In standby mode, press
navigation key to highlight
Get Fun & Games.
MENU, use the left
GET IT NOW. Press
Section 9: Multimedia
131
Section 9
Send a PIX to your online album.
2. Press
Get New App.
3. Use the navigation keys to make a selection and press
.
4. Choose the charge Either Subscription or Unlimited, then
press
. Follow in screen prompts to apply.
Get News & Info
Section 9
1. In standby mode, press
navigation key to highlight
Get News & Info.
MENU, use the left
GET IT NOW. Press
2. The browser is launched and a pop up screen with
available applications is displayed.
3. Use the navigation key to browse the categories.
4. Once the desired category is highlighted, press
enter the category list.
to
When you use Get News & Info, some of the keys operate
differently than during a normal phone call.
It presents on-screen items in any of the following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can utilize the options or links by using the soft keys.
132
Get Going
Get Going
Download applications that keep you in touch with the
world, keep you organized, and help you find the coolest
spots.
1. In standby mode, press
navigation key to highlight
Get Going.
MENU, use the left
GET IT NOW. Press
2. Get New App. is highlighted. Press
.
4. Follow on screen subscription prompts and press
The download process begins.
.
5. At the “App installed successfully. Would you like to run
it?” prompt, press Yes to launch application, or No to
return to category list.
Note: The GET GOING menu will display all downloaded applications, with
the most current download first.
Section 9: Multimedia
133
Section 9
3. Highlight the application you wish to download and
press
.
134
Section 9
Section 10: Tools
Topics Covered
• Calendar
• MP3 Player
• Alarm Clock
• World Clock
• Notepad
• Calculator
The topics covered in this section allow you to schedule
appointments, view the calendar, play MP3 files, set an
alarm, view time zones, take notes, and perform simple
math calculations.
Section 10
Section 10: Tools
135
Calendar
Schedule up to eight events for any day by indicating each
event’s start and end time. Set alarms for events so that
you can be alerted before an event takes place. Events
scheduled for future dates automatically appear on your
Today events schedule for the present day.
Add a new event
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
Calendar. The calendar appears in the
display with the current date highlighted.
2. To view available options, press the right soft key
Options. A pop-up menu appears in the display that
contains the menu items.
Section 10
• Weekly: View the current week.
• Go To Date: Go to any date that you specify.
• Go to Today: View today’s events.
• Erase Old: Select a past event to delete.
• Erase All: Delete all events in your calendar
3. Press the left soft key
Add to add a new event.
4. The Appointment name field is highlighted. Enter the
name and use the down navigation key to move to the
following fields:
• Start Date: Enter the start date for the event.
• Start Time: Enter the start time for the event.
• am/pm: Select from am or pm for the start time.
• End Date: Enter the end date for the event.
136
Calendar
• End Time: Enter the end time for the event.
• am/pm: Select from am or pm for the end time.
• Time Zone: Enter the time zone you wish your event to
reflect.
• Recurrence: Select the frequency of the event.
• Alert: Sets the alarm for the event. Select from Tone, Vibrate, or
Light Only.
• Reminder: Set a reminder up to one day before the event.
5. Fill in and select event details using the navigation keys
and the alpha-numeric keypad.
6. Press
. The event is saved.
View an event
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
Calendar.
3. Use the navigation keys to highlight the date containing
the event that you wish to view. Press the right soft key
Options.
Tip: Use the volume key to move between months in the calendar.
4. In the pop-up menu that appears in the display, use the
navigation key to highlight Go To Date, then press
.
5. Enter the desired date in the box, then press
. The
month that you entered appears in the display with the
event date highlighted.
Section 10: Tools
137
Section 10
2. A calendar appears in the display with the current date
highlighted.
6. Press
VIEW to view event details for the date.
7. To edit the event, press the left soft key
changes, then press
SAVE.
8. Press the right soft key
appears in the display.
Edit. Make
Options. A pop-up menu
9. To erase the current event, press
Erase. A pop-up
menu appears with Yes highlighted. press
to erase,
or highlight No to cancel.
10. To see the selected date in a month view, press
Monthly.
11. To see the selected date in a week view, press
Weekly.
Section 10
MP3 Player
The MP3 Player can be used to play files you have loaded
from your PC to your TransFlash memory card. You can
play your MP3s with the flip open or closed.
Note: The following characters cannot be used in an MP3 filename:
/\*?“<>:|
The file name is limited to 60.3 characters (sixty to left of ‘.’, three to
right of ‘.’)
Setting Up Your TransFlash Card to Play MP3s
1. Insert the TransFlash card into the phone.
2. Press the Play/Pause (
) key to launch the MP3
Player. The My_MP3s directory will be created on the
TransFlash card.
138
MP3 Player
3. Remove the TransFlash card from the phone and insert it
into a PC adaptor (purchased separately).
4. Transfer MP3 files from your PC to the My_MP3s
directory on the TransFlash card.
5. Insert the TransFlash card back into the phone.
Playing MP3s with the Flip Closed
The external MP3 keys which you will use are labeled
below.
Note: If the TransFlash memory card is not inserted in the phone when the
MP3 Player is launched, the warning message, CARD NOT AVAILABLE.
PLEASE INSERT CARD, is displayed.
When the MP3 Player is launched, if a directory named My_MP3s does not
exist on the TransFlash card, this directory will automatically be created on
the TransFlash card. If no MP3 files are found in the directory, the message
NO MP3 FILES FOUND IN My_MP3s ON CARD will be displayed.
2. To scroll through the list, turn the jog dial until the MP3
that you want is highlighted. Each quarter turn will scroll
up or down one item.
Section 10: Tools
139
Section 10
1. In standby mode, with your flip closed, press and hold
the Play/Pause (
) key. A list of MP3s will be
displayed.
3. Press the Play/Pause (
play the MP3.
) key or press the jog dial to
4. To stop an MP3, press the Stop (
) key.
5. You can use the Fast Forward (
) and Rewind (
keys to forward or rewind your MP3 to another song.
Press and hold the Fast Forward (
) and Rewind
(
) keys to forward or rewind the current song
approximately 20 seconds.
)
Playing MP3s with the Flip Open
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
MP3 Player. The MP3 Player opens with the
list of files displayed.
Section 10
Note: If the TransFlash memory card is not inserted in the phone when the
MP3 Player is launched, the warning message, CARD NOT AVAILABLE.
PLEASE INSERT CARD, is displayed.
When the MP3 Player is launched, if a directory named My_MP3s does not
exist on the TransFlash card, this directory will automatically be created on
the TransFlash card. If no MP3 files are found in the directory, the message
NO MP3 FILES FOUND IN My_MP3s ON CARD will be displayed.
2. Press the right soft key
following options:
•
•
•
•
•
Options, to select from the
Select All: Marks all MP3 files for play.
Rename: Enter New Name to rename the MP3 file.
Erase: Erases the selected file.
Erase All: Erases all files.
Song Info: Displays title, artist, album title, genre, copyright,
time, size and bit rate information for the file.
140
Alarm Clock
Note: The following characters cannot be used in an MP3 filename:
/\*?“<>:|
The file name is limited to 60.3 characters (sixty to left of ‘.’, three to right
of ‘.’)
3. Press the up/down navigation keys to highlight the song
you want to listen to and press
to mark it. To select
more than one song, press the up/down navigation key
and press
to mark each one.
4. Press the left soft key
file(s).
Play, to play the marked MP3
Alarm Clock
Your phone has an alarm clock that can be set to go off
once, or recur daily at a specific time. Once set, the alarm
clock is easy to change or turn off.
Set An Alarm
2. The following options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
3. Use the navigation key to highlight the alarm that you
wish to enable, then press
. The Set Alarm (1, 2, or 3
depending on your selection) screen appears in the
display.
Section 10: Tools
141
Section 10
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
Alarm Clock. The Alarm Clock menu
displays with the Alarm 1 highlighted.
4. The Alarm field is highlighted. Use the left/right
navigation keys to select On or Off.
5. Press the down navigation key to highlight the Time
field, then enter the time that you wish for the alarm to
sound.
6. Press the down navigation key once to highlight the am/
pm field. Use the left/right navigation keys to select am
or pm.
7. Press the down navigation key once to highlight the
Frequency field. Use the left/right navigation keys to set
the frequency (occurrence) of the alarm. Below lists and
defines the options for this field.
Section 10
• Once: The alarm sounds only once, at the time specified.
• Daily: The alarm sounds every day at the time specified.
• Mon-Fri: The alarm sounds Monday through Friday at the
time specified.
• Weekends: The alarm sounds Saturday through Sunday at
the time specified.
8. Press the down navigation key once to highlight the first
Ringer field. Use the left/right navigation keys to set the
ringer to Tone, Vibrate, or Light Only.
9. If you selected Tone, press the down navigation key
again to highlight the second field. Use the left/right
navigation keys to set the alert tone to VZW Default Tone,
or select a tone from your My Ringtones or My Sounds
folders.
10. When all fields have correct information entered, press
SAVE to save your settings.
142
Alarm Clock
Disable an alarm before it sounds
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
Alarm Clock. The Alarm Clock menu displays
with the Alarm 1 highlighted.
2. Use the navigation keys to highlight the alarm you wish
to disable, then press the right soft key
Options. A
pop-up menu appears in the display.
3. Press
Off to turn the highlighted alarm off. Press
Reset Alarm to reset the highlighted alarm or press
Reset All to reset all of the alarms.
Snooze
When an alarm sounds, a menu screen displays that
allows you to either turn the alarm off or to have the alarm
ring again after 5 minutes. This is called Snooze.
1. Set one of your phone’s 3 alarms. For more information
about setting an alarm, see "Set An Alarm" on page
141.
2. When an alarm sounds, use the up/down navigation key
to highlight Snooze or Dismiss. To snooze, highlight
Snooze and press
to set it to ring again after 5
minutes. Or, highlight Dismiss to turn the alarm off
completely. The alarm turns off and the standby screen
displays.
Section 10: Tools
143
Section 10
To use this feature follow these steps:
World Clock
World Clock allows you to view the time of day or night
in any part of the world.
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
World Clock.
2. Use the left soft key
Cities to display the 45
supported cities. Press
to save your entry.
3. Press the right soft key
options:
Options to view the following
• Set as Local Time: Sets the time according to the city
chosen in the Cities field.
• Daylight Savings Time: Sets the Daylight Savings time
option.
Section 10
4. You can scroll through other cities by pressing the
navigation keys.
5. Press
to return to standby mode.
Notepad
Create and store notes in Notepad. Return to Notepad
anytime to review and edit your notes.
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
Notepad. The Note Pad menu opens.
2. If you have any stored notes, they appear as a list in the
display. If this is your first time in Notepad, No Note
displays.
144
Notepad
3. To add a new memo, press the left soft key
then enter the memo using the keypad.
Add,
4. While entering a memo, press the left soft key
Abc,
to display a pop-up menu with the following text entry
modes
•
•
•
•
•
Word
Abc
ABC
123
Symbols
5. Use the navigation keys to select the other available text
entry modes of 123, Word, and Symbol, or press
to
exit the pop-up menu.
6. When you’re finished entering details for the note, press
. The note is saved.
Review, Add, Edit, and Erase Memos
2. With a memo highlighted, press the right soft key
Options. A pop-up menu with the options listed in the
following table appears in the display:
• Edit: Edit the note currently highlighted or appearing in the
display.
Section 10: Tools
145
Section 10
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
Notepad. The Note Pad menu opens. If you
have any stored notes, they appear as a list in the
display.
• Erase: Erase the note currently highlighted or appearing in the
display.
• Erase All: Erase all notes.
3. Use the navigation keys to highlight an option or press
to exit the pop-up menu.
4. Press
to perform the highlighted option’s function.
Calculator
You can perform calculations, including addition,
subtraction, multiplication and division using your
phone.
1. In standby mode, press
MENU, then press the right
navigation key to
SETTINGS & TOOLS. Press
Tools
Calculator. The Calculator opens.
2. Enter the first number in your equation using the keypad.
(Numbers can be up to nine digits long.)
Section 10
3. Press the right soft key
Operator to display a pop-up
menu which allows you to enter a Parenthesis or Power if
desired. Press the left soft key
Clear to clear all data
entered.
4. Press
5. Press the
to change the sign for a number to a negative.
to add a decimal point.
6. Use the navigation keys to set the type of calculation that
you wish to perform. Your choices are as follows:
•
•
•
•
146
Up key: [+] Addition
Down key: [-] Subtraction
Right key: [x] Multiplication
Left key: [÷] Division
Calculator
7. Use the keypad to enter the second number into your
equation.
8. Press
result.
to perform the calculation and view the
Section 10
Section 10: Tools
147
148
Section 10
Section 11: Mobile Web
Topics Covered
• Mobile Web
• Launching Mobile Web
• Exit Mobile Web
• Navigate the Web
• Mobile Web Soft keys
• Links
• Place a Call While Using Mobile Web
This section outlines the available gaming options and
accessories for your phone. For more information, contact
your service provider.
Section 11
Section 11: Mobile Web
149
Mobile Web
Mobile Web allows you to surf the web from your
wireless phone.
If you receive a call while using Mobile Web, the web
session is suspended during the call. Once the call ends,
your Mobile Web session resumes where you left off.
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhanced Services Area.
Any time the service indicator icon is visible, you are connected to the
Internet and billed accordingly. Rates and prices vary according to your
service contract. For further information on billing contact Verizon Wireless.
Launching Mobile Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhanced Services Area.
1. In standby mode, press the up navigation key. Mobile
Web and a list of categories (representing one or more
web sites) appears in the display.
2. Use the navigation key to browse the categories.
3. Once the desired category is highlighted, press
enter the category list.
Section 11
Exit Mobile Web
To exit the Mobile Web, press the
150
key.
to
Navigate the Web
Navigate the Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhanced Services Area.
When you use Mobile Web, some of the keys operate
differently than during a normal phone call.
Mobile Web presents on-screen items in any of the
following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can act on the options or links by using the soft keys.
Mobile Web Soft Keys
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhanced Services Area.
How Mobile Web keys work
The following table lists Mobile Web keys and functions.
Section 11: Mobile Web
151
Section 11
At the bottom of the Mobile Web display contains the
browser commands. The left
and right
soft keys on
the keypad are used to perform the commands in the
display. These are called “soft keys” because their
function changes depending where you are in the
application.
Navigation Key: Use the navigation key to browse
lists and highlight options.
CLR Key: A browser back-up key. Press once to back
up one page. Press and hold to go back to Mobile Web
home page.
Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the
display.
Asterisk/Shift Key: Press before entering text to
enable upper case characters (in Abc mode).
0/Next Key: Press to enter a zero (0), or to display
another word in the dictionary when in Word entry
mode.
Pound/Space Key: Press to insert a space when
entering text.
Numbers 1 - 9: Use the number keys to select items
in a menu if they are numbered.
END Key: Press to exit Mobile Web and return the
phone to standby mode.
Left Soft Key: Press the left soft key to go to the
highlighted web link and/or perform the function
above it in the display.
Section 11
Right Soft Key: The right soft key is the Menu key.
Press this key to display a pop-up menu with several
options.
SEND Key: Press to dial a highlighted number.
152
Links
Links
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhanced Services Area.
Links can serve several purposes, such as jumping to a
different page, to a different site, or initiating a phone call.
Links are underlined (__). Normally, the left soft key
is
used to select a highlighted link.
Place a Call While Using Mobile Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhanced Services Area.
You can place a call while using Mobile Web if the website
supports this feature. Press the appropriate soft key to call
the number. In most cases you can also press
to call the
number. The Internet connection terminates when you
initiate the call. After you end the call, your phone returns
to standby mode.
Section 11
Section 11: Mobile Web
153
154
Section 11
Section 12
Section 12: Health and Safety
Information
Topics Covered
• Health and Safety Information
This section outlines the safety precautions associated
with using your phone. These safety precautions should
be followed to safely use your phone
Section 12: Health and Safety Information
155
Section 12
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the exposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government. These FCC exposure limits are derived from
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressed in units of watts per kilogram (W/kg). The FCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined
156
Health and Safety Information
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations are
restricted to Samsung-supplied, approved, or nonSamsung designated accessories that have no metal and
must provide at least 1.5 cm separation between the
device, including its internal antenna and the user's body.
Non-compliance with the above restrictions may result in
violation of FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
• Head:1.470 W/Kg.
• Body-worn: 0.611 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
Section 12: Health and Safety Information
157
Section 12
at the highest certified power level, the actual SAR level
of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower
the power output.
Section 12
printed somewhere on the case of the phone. Sometimes
it may be necessary to remove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
and it should provide values for typical or maximum SAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell,"
"mobile," or "PCS" phones. These types of wireless phones
can expose the user to measurable radio frequency energy
(RF) because of the short distance between the phone and
the user's head. These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other federal
health and safety agencies. When the phone is located at
greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
158
Consumer Information on Wireless Phones
produce RF exposures well within the FCC's compliance
limits.
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
when in the stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
Section 12: Health and Safety Information
159
Section 12
Do wireless phones pose a health hazard?
Section 12
to repair, replace or recall the phones so that the hazard no
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
160
Consumer Information on Wireless Phones
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations are
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as
to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposed the animals to RF for up
to 22 hours per day. These conditions are not similar to the
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Section 12: Health and Safety Information
161
Section 12
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
Section 12
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phones RF exposures. However,
none of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
162
Consumer Information on Wireless Phones
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of new
research programs around the world. The Project has also
helped develop a series of public information documents
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
Section 12: Health and Safety Information
163
Section 12
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
Section 12
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
164
Consumer Information on Wireless Phones
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
Section 12: Health and Safety Information
165
Section 12
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such
a recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence that
any health hazard exists.
Section 12
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
Federal trade Commission (FTC) charged two companies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate their
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI. FDA
has tested wireless phones and helped develop a
166
Consumer Information on Wireless Phones
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and health (NIOSH):
http://www.cdc.gov/niosh/topics/emf/
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation/
Section 12: Health and Safety Information
167
Section 12
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard
specifies test methods and performance requirements for
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
• Updated 7/16/2003: US Food and Drug Administration
Section 12
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voicemail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
168
Road Safety
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
Section 12: Health and Safety Information
169
Section 12
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
Section 12
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
For more information, please call 1-888-901-SAFE, or visit
our web-site www.wow-com.com
Provided by the Cellular Telecommunications & Internet
Association.
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder if you are using an
external antenna).
170
Using Your Phone Near Other Electronic Devices
Using Your Phone Near Other Electronic Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
Section 12: Health and Safety Information
171
Section 12
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Section 12
interference noise, and phones also vary in the amount of
interference they generate.
The wireless telephone industry has developed ratings
for some of their mobile phones, to assist hearing device
users in finding phones that may be compatible with their
hearing devices. Not all phones have been rated. Phones
that are rated have the rating on their box or a label on the
box.
The ratings are not guarantees. Results will vary
depending on the user’s hearing device and hearing loss.
If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4 is
the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements
and are likely to be more usable with a hearing device’s
telecoil (“T Switch” or “Telephone Switch”) than unrated
phones. T4 is the better/higher of the two ratings. (Note
that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to
this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
172
Potentially Explosive Environments
Other Medical Devices
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been
added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots
Section 12: Health and Safety Information
173
Section 12
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Section 12
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the Send key.
174
FCC Notice and Cautions
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to
play with it because they could hurt themselves and
others, damage the phone or make calls that increase your
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Section 12: Health and Safety Information
175
Section 12
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
Section 12
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece
of equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
176
Product Performance
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Section 12
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
If you're inside a building, being near a window may give
you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Section 12: Health and Safety Information
177
Section 12
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your
shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at
an additional cost. Other conditions and restrictions may
apply. See your service provider for additional
information.
178
Battery Standby and Talk Time
Battery Standby and Talk Time
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
Section 12: Health and Safety Information
179
Section 12
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
Section 12
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
180
Care and Maintenance
• Dispose of used batteries in accordance with local regulations.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
• Keep the phone and all its parts and accessories out of the
reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving
parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
Section 12: Health and Safety Information
181
Section 12
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
Section 12
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• If your phone has an external antenna, use only the supplied or
an approved replacement antenna. Unauthorized antennas or
modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
182
Section 13: Warranty Information
Topics Covered
• Standard Limited Warranty
Section 13: Warranty Information
183
Section 13
This section explains the warranty information for
your new phone.
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
Section 13
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period of time after
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged
due to normal use; (d) malfunctions resulting from the use
of Product in conjunction with accessories, products, or
184
Standard Limited Warranty
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
Section 13: Warranty Information
185
Section 13
ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from
improper testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals
on the battery are broken or show evidence of tampering,
or (iii) the battery has been used in equipment other than
the SAMSUNG phone for which it is specified.
Section 13
warranted for a period of ninety (90) days. All other
repaired/replaced Product will be warranted for a period
equal to the remainder of the original Limited Warranty
on the original Product or for 90 days, whichever is longer.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of such
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
186
Standard Limited Warranty
RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO
Section 13: Warranty Information
187
Section 13
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND
Section 13
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR
EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT
WITH THE PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
188
Standard Limited Warranty
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005 Samsung Telecommunications America,L.P. All
rights reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Printed in South Korea
Section 13: Warranty Information
189
Section 13
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
190
Section 13
Index
Bluetooth Settings 114
Numerics
Calendar
1-touch dialing 71
2-touch dialing 72
3G protocol icon 22
3-touch dialing 72
911, notes about 108
Call Functions 29
A
Adding a New Contact Entry 63
Alarm clock
icon 23
snooze 143
turn off the alarm 143
Answer options 110
Auto answer 110
Auto answer icon 24
Auto retry 110
B
Backup to last menu 48
Battery
charging 26
indicator 27
installing 26
removing 26
strength icon 23
Bluetooth
About 114
Bluetooth icons 23
C
add a new event 136
Answering a Call 30
Call Histories 31
Roaming 35
Call history
calls using 33
definition 31
deleting entry 34
icons 33
new contact 33
updating existing contact 33
restriction 112
Call
Call Sounds 95
Camcorder
recording video 128
Camera
Camera/Camcorder key
18
taking pictures 126
Change lock code 107
Changing Message Settings 88
Chat 92
Clear key 20
Command Keys 19
Contacts
wait pause & 2-second
191
pause 65
Creating and Sending New
Messages 77
Creating and Sending PIX /
FLIX message 88
Creating and Sending Text
message 77
Entering Upper and Lower Case 58
Using Word Mode 57
F
Finding a Contacts Entry
69
Finding My Phone Number
73
D
Device Info 103
Dialing
Folder
one-touch 71
three-touch 72
two-touch 72
Disable alarm 143
G
Display
animation 102
backlight 100
banner 99
language 104
screen icons 22
Draft messages 86
drafts 86
inbox 83
Get It Now 120
Get New PIX 126
Get News & Info 132
Get PIX & FLIX 122
Get Tunes & Tones 121
Getting Started 9
Drafts folder 86
Understanding this User
Manual 11
Voicemail 10
GPS icons 23
E
Groups
E-Mail 90
Emergency numbers
creating 67
move entries from/to 66
send messages to 67
send PIX msg to 68
viewing 66
lock mode 108
End key 20
Entering Text 55
Changing the Text Entry
Mode 56
Entering Numbers 59
Entering Symbols 58
192
H
Handwritten messages 83
Hard pause 65
Health and Safety Infor-
mation 155
I
Icons
alarm on 24
alarm only 24
battery strength 23
display 22
dormant 23
signal strength 22
silent mode 23
TTY 23
Inbox folder 83
Indicator
calendar appointment 24
missed calls 24
new message 24
no service 23
roaming 22
signal strength 22
speakerphone 24
Installing battery 26
Memory Card Storage 27
Memos, editing 145
Menu Navigation 47
Menu Outline 50
Menu shortcuts 48
Menu, in-use option 49
Message folder
drafts 86
inbox 83
Messages, receive in call
82
Messaging 75
Types of Messages 76
Mobile IM 91
Mobile Web 149
exit 150
launch Mobile Web 150
links 153
navigate the web 151
soft keys 151
Instant Messaging 91
In-use menu 49
Mode
L
MP3 Player 138
Multimedia 119
My Name Card 73
My phone # 73
Language setting 104
Left soft key 19
Links 153
Lock code, changing 107
Lock phone 106
M
Making a call 30
Master Volume 95
call answer 110
N
Navigation key 21
Navigation key shortcuts
49
New message icon 24
193
No service indicator 23
Note pad 144
Notes and tips 11
Notes, description 12
Roaming indicator 22
P
Security
Phone Memory Storage 28
Picture ID 114
PIX Gallery 127
PIX messages
rejecting 82
view later 82
Place a call while using
Mobile Web 153
Powering off 10
Powering on 10
R
Receive messages in call
82
Receive text messages 76
Removing battery 26
Reset phone 108
Restrict calls 112
Retrieving a Message 76
Retrieving New Message
90
Return to last menu 48
Reviewing sent 85
Right soft key 20
Ringer ID 114
Roaming
194
definition 35
options 35
S
call restriction 112
edit lock code 107
lock phone 106
voice privacy 111
Security settings 105
Send key 21
Sent, reviewing messages
85
Set an alarm 141
Settings 93
backlight 100
banner 99
Display Settings 94, 98
edit lock code 107
language 104
lock phone 106
Resetting Your Phone
108
Ringer Settings 95
Security Settings 111
Shortcut List 94
Shortcut to menus 48
Signal strength icon 22
Silent mode icon 23
Snooze 143
Speakerphone Key 21
Speed dial, assigning 72
Standard Limited Warranty
Standard Limited Warranty 184
U
Understanding Your Contact List
Finding a Contact Entry
69
Store numbers, shortcuts
71
Storing numbers after a
call 70
Understanding Your Contacts 61
Adding a New Contact
Entry 63
Deleting a Contact Entry
70
Editing an Existing Contact Entry 69
Finding My Phone Number 73
Speed Dialing 71
T
Take FLIX 128
Take PIX 126
Text messages, receiving
76
Three-touch dialing 72
Tip
find a name 30
Tip, description 12
Tools 135
alarm 141
calculator 146
calendar 136
MP3 Player 138
note pad 144
view an event 137
world time 144
Travel Adapter 27
TTY mode 36
Turning Your Phone On
and Off 10
Two-second pause 65
Two-touch dialing 72
Understanding Your Phone
13
Battery 25
Display Screen 21
Features of Your Phone
14
Front View of Your Phone
15
V
V CAST Video
browsing/playing clips
123
configuring alerts 125
deleting clips 124
description 122
downloading clips 123
Vibrate mode icon 24
195
Video clips 122
View an event, calendar
137
View PIX Msg Later 82
Voice Call Icon 23
Voice mail
listening to 11
Voice mail icon 24
Voice notes
renaming 46
Voice privacy 111
Voicemail 90
Voicemail, viewing messages 90
VoiceSignal
description 42
digit dial 43
features 42
menu 36
name dial 42
name lookup 44
open apps 44
settings 37
W
Warranty Information 183
World time 144
196
Download PDF