Advertisement
Advertisement
FCC Warning Pairing: Press A or B for 5 seconds, indicator will light itself will also blink twice. Pairing is completed. Adding the Remote Controller to the APP: After pairing the light with the controller, turnthe wall switch on/off ON/OFF three times. The light will be registered in the Cloudy Bay APP, and the remote controller icon will appear on the screen. K- RGB K+ Disconnecting Pairing: Press + or for 3 seconds until indicator light flashes. This will cancel the pairing A Timer Scene M o d e l : C B R C FCC ID: 2A4FVCBRC Timer , if the indicator light flashes twice light will turn off in 15 minutes; if the indicator light flashes 4 times, light will turn off in 30 minutes; if the Favor A Timer : Short press B B indicator light flashes 6 times, light will turn off in 60 minutes. To cancel the timer, long-press the button until the indicator light flashes four times. Favorite Setting: Press Favor for 3 seconds until indicator light flash twice, existing color or scene will be 20.06 mm memorized. Please call toll free number+1)877-870-5171 or send E-mail to [email protected] if you need any supports. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Portable RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ">

Public link updated
The public link to your chat has been updated.
Advertisement