E-MOTO | EMVG3-SIL | Product guide | E-MOTO EMVG3-SIL Product guide

Product Guide
Roller Shade Collection
Revised 8/28/2013
Contact
Address:
QMotion Shades
3400 Copter Road
Pensacola, FL 32514
Website:
www.qmotionshades.com
qmotioninfo@qmotionshades.com
Phone:
Customer Service Number: 877.849.6070
Fax: 850.208.3409
Social:
http://www.twitter.com/qmotionshades
http://qmotionblog.com/
http://www.facebook.com/QmotionShades
Table of contents
Features................................................................. 1
Options.................................................................. 2
Shade Information.................................................. 3
Low Voltage Transformer Information...................... 4
Shades.................................................................. 5
Qlink Shades......................................................... 6
Mounting Brackets................................................ 7
Fascia................................................................... 8
Battery Life............................................................ 9
Non-Motorized Shades..........................................10
Cassette Shades.................................................. 11
Fabric Measurement Listings................................ 12
Fabric Color Listings............................................. 25
Accessories.......................................................... 28
Controls................................................................ 29
Wall Docking Stations........................................... 32
Customer’s Own Material (C.O.M.)....................... 33
Special Ordered Material (S.O.M.)........................ 33
Shade Measurement Instructions.......................... 34
Order Form Guide/Form....................................... 36
Reference Information.......................................... 39
Setting Hembar Position............................ 40
Advanced Remote Settings....................... 42
Brackets (illustrations)............................... 45
Cassette and Qlink................................... 54
Fascia (illustrations)................................... 55
Qbasic Fascia (illlustrations)...................... 60
Copyright Notice and Disclaimer........................... 61
Limited Warranty................................................... 62
Features
QMotion® offers state-of-the-art natural light control with the
following benefits:
• Industry leading light gaps on the sides of the
shades as small as 1/2” gap on each side,
providing the most uniform and highest level
of window coverage.
Several different control options
• QMotion® Shades offer the convenience of moving the shade up or down, stopping at any of the
top, the bottom, three programmable intermediate stops, or anywhere in between; all with the
ease of a button press.
Unparalleled simplicity
• QMotion® automated shades are powered by a
low voltage power supply, or an internal pack of
standard D-cell batteries. Low voltage power can
also be backed up, for uninterrupted operation.
• Our low voltage option allows shades to be
powered either individually with a single
transformer, as group of four, or with a power
panel for supplying as many as 16 shades with
power.
• Batteries can last up to five years or more,
dramatically reducing maintenance cost and
adding convenience. (Shade size and usage
will determine actual battery life.)
-No cords
-No electrician
-No wires -No special tools
QMotion®
• Lose your remote? No problem!
shades can be moved up or down manually
with no remote control. Simply give the shade a
gentle pull to get them started.
• Interested in reducing your energy bills? The
programmable timer remote can be set up to
move your QMotion® shade automatically.
Automate your shades by time of day, day of
week, sunrise, or sunset. Create six distinct
settings and let the shades do the rest.
• Want to control multiple shades with just one remote? QMotion® multi-channel remote controls
6 individual shades or 6 groups of shades all with
one remote control. Each channel can
have an unlimited number of shades
programmed to it.
Unmatched quietness
• QMotion® engineers developed a shade
with whisper quiet operation for a beautiful
and peaceful experience.
Distinctive designs
• Generous fabric collection of light filtering,
decorative and beautiful blackout materials.
1
Options
QMotion® advanced shade solutions allow for a customized experience.
The look you want
The choice you prefer
• QMotion® shades offer several choices of fascia to conceal the top of the roller shade.
Choices include a painted fascia and a
fabric wrapped fascia.
• Transformer low voltage power supply is a
wired power solution for those who want the
benefits of QMotion® Automated shades with a
connection to the facility electrical system.
Available in a single unit, or one which can power
up to four shades or in a panel solution for as
many as 16 shades. Low voltage shades deliver
all the benefits of QMotion® technology.
• Battery powered QMotion® Shades offer the
same benefits as low voltage powered, and add
in the ability to install in difficult situations as well
as function in the absence of electrical supply.
Because QMotion® battery powered shades use
an internal battery pack, there are no visible
battery packs or wires to hide or see.
The design you need
• Shades come in either standard roll or reverse roll. Standard roll shades have the
fabric rolling off the back of the roll, close to the
window, while reverse roll shades come off the
front of the shade roll, and are further from the
window glass. Reverse roll may be a preference
for design purposes, or may be needed to permit
the shade to lower clear of window obstructions.
The number you want
Customization that’s right for you
• Our dual shade system allows users to choose
a combination of two shades on the same
window. Often used with a light filtering fabric
in the front and with a room darkening fabric
closest to the glass, QMotion® dual shades are
an excellent way to double treat a window in a
small space.
• Choose from our assortment of remote controls.
Among the choices is our programmable timer
control which allows for setting of times for
unattended shade movement or our multichannel
remote to control various shade groups from a
single hand held transmitter. All transmitters fit on
our magnetic wall docking stations, and may be
secured in place using our wall station adapter.
• As our programming is simple, all shades arrive
ready to “learn” to your remotes. A shade may be
controlled by as many as 12 different transmitters.
• Combine groups and transmitters for your
convenience. A channel can be for a single
shade or a group of shades, and various
groups can be programmed to suit the space.
2
Shade Information
Finally, the luxury and safety of automated shades, completely
free of cords and wires, are accessible to everyone.
Order specifics
Fabric orientation and size
• Shades ship complete with brackets and
batteries, as needed, ready to install.
• Shades may be specified standard or reverse roll.
• If desired, a 24v low voltage transformer power
option may be specified.
• All shades ship with fabric oriented in the vertical
roll direction from the mill.
• If a shade in a group is railroaded, you have the
option to railroad all shades the group to match.
• Railroading is available on select fabrics only.
• Seaming is available in all fabrics.
• The seam will be placed near the top of the
shade unless specified otherwise.
Size limitations
• Minimum width 221/2” with batteries,171/2” with
low voltage power.
• Maximum width 144”.
• Maximum height 144”.
• Consult fabric tables for available fabric heights,
widths and more specific size availability.
Side gaps
• 1/2”
industry leading side gaps are uniform
on each side of the shade. Fabric width will
be 1 ” narrower than the specified bracket to
bracket dimensions.
Roll size
Tube and hembar size
• Roll up diameter or RUD is determined by the
size of the shade and fabric chosen.
• Extra length of material will be added to the
height of the shade in order to allow the fabric to
wrap around the tube when fully rolled down.
• Tube and hembar diameters vary depending on
the height and width of your shade.
• Hembars are available in painted or fabric
wrapped. Paint colors are white, sand, silver,
bronze and black.
• All roll up diameters 2.6 or less ship with 1/2”
hembars.
• Shades shipped with roll up diameters greater
than 2.6 ship with 3/4” diameter hembars.
• A 3/4” hembar is compatible with 2.5” brackets
and may be noted as a substitution on the shade
order form.
3
Low Voltage Transformer Information
QMotion® Low Voltage shades offer all the same
features of QMotion® Battery powered shades, and
are compatible with fascia as well as controls.
• Battery tube is replaced with transformer leads
• Each shade comes with a 24” wire lead.
• Tube is configured to convert low voltage into the
proper level to power the shade.
• Power supply options are available to power one
shade or multiple shades.
• The power supply can be at the header with
the shade, on the floor near the shade or in an
equipment room several hundred feet away from
the shade.
• In Single Shade Option, a plug-in power supply
provides 24v DC to the shade.
• Low voltage single shades are controlled with the
same wireless RF remote as the battery option
shades.
• With the Low Voltage Distribution Box the power
supply is designed to distribute the
appropriate power to as many as four shades.
• The power distribution panel sends power
individually up to sixteen shades. The panel
also provides protection against short circuit
or overload to individual shades.
• 24v to 48v power input accepted.
• QMotion® Low Voltage shades continue to offer
the unique and patented manual override system.
*Electrical Panel Box system may be equipped with a
customer supplied battery back up system, in the case
of a site power event.
Electrical Panel Box
120V AC In
24V DC Out
Max 6.0 AMP Out
Wire Gauge Requirements
QMotion® does not supply the wires from the
transformer to the shades. Recommended minimum
wire gauge requirements for distances between
power supply and shade or distribution box and shade
are as follows for the required 2 conductor cables:
Distribution Box
120V AC In
24V DC Out
Max 7.0 AMP Out
Wire Length (ft.)
24v
Min. Wire Gauge
1500-3000
12
1200-1500
14
700-1200
16
500-700
18
0-500
20
**Consult your local electricity provider or state regulatory agency
for their guidelines regarding cable installation. Comply with all
building codes, safety regulations and legal standards.
4
Shades
The next generation of QMotion® Shades takes automated window shades to a
higher level.
2nd Generation QMotion® Shades
• Low voltage wired shades can accommodate left
or right side connection.
• Longer battery life.
• Extended range and enhance responsiveness
to transmitters.
- 30 feet or more in most applications (each installation is different, and environmental
factors may effect results.)
• Improved functionality with remotes.
• Advanced electronics are designed to be more
responsive and durable.
• Improved programming ease.
The new design of QMotion® delivers a simpler,
sophisticated automated shade that offers both ease
of use and dependability.
Easy Battery Replacement - By placing the access
port for the batteries in the shade tube wall, you can
now change the batteries without having to remove
the shade from the brackets. The battery life is up to
5 years, depending on shade size and usage. Easy
Fabric Removal and Installation – A snap-on spline
is attached to the fabric and can be pulled off and
snapped on to the shade tube. The spline that
attaches the shade to the tube permits the
rollershade fabric band to be easily removed for
cleaning, maintaining and sanitizing OR replacement
of the fabric altogether. Demounting the tubes or
brackets for cleaning is unnecessary.
Side Channels and Sill Rail
• Side Channel and Sill Rail now offer a better light
control solution by covering the sides and bottom.
• Side Channels are 2” wide, and the fabric travels
inside them with a light blocking wool pile to
assist with better light control.
• Side Channels and accompanying Sill Rails
come in any of the 5 standard colors. (White,
Anodized, Sand, Bronze, or Black)
• Sill Rail is “L”-shaped, and can be oriented to
show either 11/8” or 2” face toward room.
• Fits into fascia to ensure maximum room darkening.
• Max size is 96 x 96 (depending on fabric).
• 1/2” hembar only - no fabric wrapped hembar.
5
Qlink Coupled Shades
The next generation of QMotion® Shades takes automated window shades to a
wider level.
Qlink
By using the Qlink coupling system, shades can cover
spans as wide as 30 feet with a single motor. The
linked shade’s unique coupling system supports 3/4”
minimum light gap and angles up to 40 degrees.
• Multi-window coverage without wiring, or use our
low voltage system.
• Manual override option - shade can be
operated manually at all times.
• Shades retain long battery life.
• Adjustable installation brackets for proper
shade leveling.
• All other QMotion® features and benefits
continue to apply.
• Cover with QMotion® automated fascia.
• Qlink coupled shade mounting brackets are
compatible with standard QMotion® mounting
brackets and independent fascia.
• For inward facing angles (like bay windows),
light gap can be smaller by using a reverse
rolled system.
Ordering Information
•
•
•
•
•
•
Standard roll has motorized shade on left.
Reverse roll has motorized shade on the right.
All shades must use same fabric.
The shades must have same height.
Choose either White or Black for Qlink.
Choose straight or select the adjustable angle
bracket for angles of up to 40 degrees.
• Bracket enables adjustments for height and depth.
• “Sprung shade” refers to the opposite end from
the motorized shade.
Total Shade
Minimum Battery Shade Width
Minimum Low Voltage Shade Width
Minimum Inner Width
Minimum Inner Sprung Width (application
dependent)
Minimum System Width
Minimum Number of Panels
Maximum System Width
Maximum Height (see fabric tables)
Battery Available
Low Voltage Available
Fascia Available
Light Gap When Straight
Battery
Decreased Life
Straight
0%
Max Angle
15%
6
32 inches
17 Inches
17 inches
17 inches
49 inches
2
30 feet
120 inches
Yes
Yes
Yes
3/4 inches
Mounting Brackets
Elegant fabrics, clean lines and modern finishes create natural beauty for
every window.
Default brackets
Seven styles
• Non-fascia shades ship with universal brackets.
• Outside mount shades ship with outside mount
brackets.
• Pocket applications are best served with our fascia.
Please note bracket requests on order form.
• Dual shade applications ship with dual brackets.
3.3” universal bracket is shipped for all outside
mount applications with roll diameters greater
than 2.6”.
• Verify bracket dimensions in the space where the
shades will be installed. If the brackets can fit,
then the shade will fit, be installed and adjusted
with ease.
• There are seven different mounting brackets
offered depending on application requirements:
2.6 Universal
3.3 Universal
2.5 Dual Shade 3.7 Dual Shade
Reverse roll brackets
• All brackets are engineered to accommodate
both reverse and standard roll.
Fascia compatibility
• The numerical designation represents the
maximum size roll diameter the bracket can
support. 2.6” brackets accommodate roll sizes
from 2.0” - 2.6”. 3.3” brackets accommodate
roll sizes from 2.6” – 3.3”.
• All brackets are compatible with fascia
treatments.
• CAD data in dwg and pdf format is available at
www.qmotionshades.com.
Roll size guidelines
• Roll size is determined at the time an order is
quoted and is dependent on material thickness,
and the height of the shade. Fabric listing
tables provide the maximum shade height for
2.6” brackets and 3.3” brackets depending on
fabric type and width of shade.
7
Fascia
Fascias add a special finishing touch.
• Some fabrics are not available to be wrapped on
Qmotion® Fascias. This is due to their inability to
be attached in an appropriately aesthetic fashion.
At the time of this writing, fabrics in our current
sample collection which are not available with
fabric covered fascia:
Avila Chantilly Edessa
Infinity
Tones Blackout
Please contact Customer Service for current
details.
Including fashionable, color-coordinated fascias
will enhance both the form and function of your
QMotion® Shades. Easily mounted either inside
or outside the window width, fascias attractively
conceal the shade system while adding to the light
protection your shades were designed to provide. So
they’re pretty and practical, all in one.
• Choose from five standard colors: White,
Silver, Sand, Bronze, and Black or fabric
wrapped to match your shade.
• Fabric wrapped options cover the entire front
face and bottom face of fascia.
• All fascia orders include color-coordinated
endcaps.
• All fascia include an integrated light-blocking strip at
the top for full finish and optimal light management.
Pocket Closure
• To conceal the lower front of a pocket
installation, Qmotion® offers the Pocket
Closure system
• This simple two part system installs easily, and
conceals the front bottom of installed shades.
• Sections are cut to size, and available up to 12.5
foot lengths, and the Closure sections are available in either 2” or 3” depths, for the best
possible match in the design.
• Available in white only.
8
Battery Life and Range Expectations
QMotion® shades offer the longest battery life in the industry.
• QMotion® uses patented techniques to manage
the weight of the shade as it is lowered.
Because of this, it takes very little energy to run
our shades up and down,meaning very low
usage of the batteries.
• Battery life is dependent on shade usage and
shade size. Larger shades, when used more, will
have lower battery life expectancy when compared to smaller shades used less frequently.
• The graph below indicates the relative battery life
of different sizes of shades and different amounts
of usage of each.
QMotion® Shades lead the industry in
battery life
• Our shades use D size alkaline batteries, while
others use AA batteries which have
fraction of the capacity. D size batteries have 7
to 8 times the capacity. We have patented the
technology to put the batteries inside the tube
providing superior aesthetics with no power
wires or antenna showing.
• While balance is important, most shades are
not moving most of the day. The shade must be
ready to accept a command 24/7, that means
the shade must be awake and listening for your
commands at all times. QMotion® shade
engineers have painstakenly designed software
and hardware that minimize battery usage when
the shade is not being used. Our technology
stretches battery life, resulting in industry
leading time between battery changes.
QMotion Battery Life Estimates
3’ x 3’ Shade
6’ x 8’
Shade
Years
of Life
12’ x 12’ Shade
0
1
2
3
4
5
Full Movements Per Day
6
Distance from shade to be controlled - (2nd Generation)
QMotion® transmitters are expected to work from
over 30 feet away. While your individual results will
vary, and may be less in some environments, many
customers have reported even better results.
We recommend the use of a Qrelay when the
transmission range of a device is not sufficient.
Transmitter
QMotion®
The
Timer Remote is a special function
device and under FCC guidelines may not transmit at
the same power as others. Range for this is typically
over 10 feet.
9
Normal (ft)
Single Channel
30
Multi Channel
30
USB Timer
10
Qconnect
50
Qrelay
30
***Remember
each installation is
unique, height of
the window, interference and other
factors may effect
this expectation.***
Non-Motorized Shades
Simplicity, elegance, and affordability from QMotion® coordinates a beautiful look.
Qbasic
Qfree
Qfree shades are identical in look
to QMotion® Automated Shades.
Each Qfree shade is designed with
the same quality engineering and
offers exceptional child safety through
the lack of continuous cords.
Each Qbasic shade
comes standard with
a chain tensioner that
meets current industry
safety requirements.
Qbasic clutch type manual shade is anything
but your basic shade. Qbasic delivers the styles you
want that surpass similar clutch type manual shades.
Pull tassel available
in black or white.
Request on order.
• Fully adjustable upper limit
• Integrated braking system
• Fully compatible with QMotion® automated
shades and brackets
• Shades over 221/2” wide may, at some time, be
motorized in the future for a surcharge (t.b.a.)
• Minimum width of 14” wide
• Shades up to 120” wide x 120” high, check
fabric charts for specific fabric capabilities
• Easily positioned to be standard or reverse roll
• Easy fabric change with spline
• Easy pull gear reduction clutch allows for smooth
and lower force operation
• Reversible fascia allows for adjustment to
standard or reverse roll
• Minimum width of 7”
• Shades up to 120” wide x 144” high
• Quick roller tube release from end bracket for
easy removal
• Standard hi-tensile strength plastic chains
• Stainless steel or nickel plated chain upgrade
available
Qbasic Specifications
Clutch Type
QB-17
QB-28
Tube Diameter1 1/2” Standard 1 1/2” Snap On Fascia
Maximum Width
108”
108”
Maximum Height
144”
144”
Maximum lbs .
17 1/2
28 1/2
9/16”
9/16”
Light Gap
Minimum Inside Depth
3 3/16”
3 9/16”
Tube Diameter
1 1/2”
1 1/2”
Gear Reduction
20%
30%
Snap On Fascia Available
No
Yes
Independent Fascia Available
Yes
Yes
10
QB-17
2” Standard
120”
144”
17 1/2
9/16”
3 3/16”
2”
20%
No
Yes
QB-28
2” Snap On Fascia
120”
144”
28 1/2
9/16”
3 9/16”
2”
30%
Yes
Yes
Cassette Shades
The next generation of QMotion® Shades takes automated window shades to a
higher level.
QCassette
The Qmotion® Cassette is formed of two extruded
parts. The top and back extrusion is a durable
structural aluminum, designed to mount securely
and retain the Qmotion® system. The face plate
is a limited vinyl material engineered to be durable
and attractive, while making installation and battery
changes simple.
QMotion® motorized Cassette Roller Shades are
powered by the same innovative battery saving
technology used in all of our roller shades. This
Cassette was designed for a soft elegant look with
easy installation in mind.
• Fully enclosed shade system covers
top and back with aluminum, and
shade rises fully into cassette.
• Installation of this single
shade cassette is literally a
“snap” with two simple
spring clips needed.
• Light blocking wool pile integrated
into the top for more complet finish
and better light management.
• Curved front cover design.
• Coordinated front cover in 5 standard laminated
colors. White, Black, Bronze, Sand and Silver.
• Painted or fabric wrapped hem bar.
• Easy access to batteries in the
shade tube through pivoting front cover.
• Works with all QMotion® controls.
• Compatible with QMotion® Automated and Qfree
shades (pull tassel recommended with Qfree
shades in cassette.)
• Available on shades up to 120 inches x 96
inches, with limited fabric exceptions. Max RUD
of 2.9”.
• End covers inlcuded with all cassette systems.
• Compatible with battery QMotion® Automated
shades only.
11
Fabric Listings
These charts are for QMotion® Automated and
Qfree Manual shades. They are designed to
provide extensive details on the shades that we
would produce with our systems.
The section in the white color indicates that the
shade will be manufactured on our 2.5” brackets.
The section in light blue color will be made on the
3.7” brackets. The dark line, cutting through the
graph indicates the size at which we would
railroad the fabric, if available.
In the charts, the grey sections are not available.
This is fabric related, as some materials cannot be
railroaded. The numbers in each cell indicate the
diameter of the rolled fabric when raised to the top.
Fabric suppliers have variation in their weaves, but
this information is based on our expectations from
the data for each material.
Fabrics that can’t be railroaded, check fabric width
for maximum shade width.
At this time, we are only producing shades as large
as 144” in either width or height. Additional sizes
may be available in the near future.
Railroaded
(vertical line)
Seamed
(horizontal line)
Railroaded
Manufactured on
2.6 Brackets
Manufactured on
3.3 Brackets
Manufactured on
4.3 Brackets
(vertical line)
Not Available
Fabric Selections (Charts on the following 12 pages):
2701-1%
4400-3%
Bali
E-Screen-5%
Linen
Natural Screen
SW 2500-1%
Chantilly
Metallic
2703-3%
4800-1%
E-Screen-1%
Oasis
M-Screen
Cirrus
Columns
Chantilly Blkt
Vizela
2705-5%
Fiji
E-Screen-10%
Infinity-3%
Island
SW 2390-5%
Tones
Eternity
Flocke
4000-5%
Avila Twilight
E-Screen-3%
Infinity-5%
Matte
SW 2410-3%
Tones Blackout
Eternity Pearl
Edessa
12
13
14
15
16
17
18
19
20
21
22
23
24
QMotion® Color Listings
Collection Color Name Color #
Standard Color
for endcaps,
hembars & fascia
SW 2701 1%
SW 2701 1%
SW 2701 1%
SW 2701 1%
SW 2703 3%
SW 2703 3%
SW 2703 3%
SW 2703 3%
SW 2705 5%
SW 2705 5%
SW 2705 5%
SW 2705 5%
SW 4000 5%
SW 4000 5%
SW 4000 5%
SW 4000 5%
SW 4000 5%
SW 4000 5%
SW 4000 5%
SW 4400 3%
SW 4400 3%
SW 4400 3%
SW 4400 3%
SW 4400 3%
SW 4400 3%
SW 4400 3%
SW 4800 1%
SW 4800 1%
SW 4800 1%
SW 4800 1%
SW 4800 1%
SW 4800 1%
SW 4800 1%
Fiji
Fiji
Avila Twilight
Avila Twilight
Avila Twilight
Avila Twilight
Avila Twilight
Avila Twilight
Sand
Silver
Bronze
Black
Sand
Silver
Bronze
Black
Sand
Silver
Bronze
Black
White
White
Sand
Silver
Silver
Bronze
Black
White
White
Sand
Silver
Silver
Bronze
Black
White
White
Sand
Silver
Silver
White
Sand
Bronze
Bronze
White
White
Sand
Bronze
Silver
Black
Oyster/Beige
Oyster Pewter
Oyster Chestnut
Oyster Charcoal
Oyster/Beige
Oyster Pewter
Oyster Chestnut
Oyster Charcoal
Oyster/Beige
Oyster Pewter
Oyster Chestnut
Oyster Charcoal
Chalk
Alabaster
Pebblestone
Greystone
Pewter
Tobacco
Ebony
Chalk
Alabaster
Pebblestone
Greystone
Pewter
Tobacco
Ebony
Chalk
Alabaster
Taupe
Grey
Clay
Pearl
Sand
Latte
Mocha
Pearl
White
Linen
Chocolate
Slate Grey
Black
80P0246
80P0064
80P0065
80P0066
80P0247
80P0068
80P0069
80P0070
80P0248
80P0072
80P0073
80P0074
80P0075
80P0076
80P0077
80P0078
80P0079
80P0080
80P0081
80P0082
80P0083
80P0084
80P0085
80P0086
80P0087
80P0088
80P0089
80P0090
80P0242
80P0243
80P0244
80P0245
80P0091
80G0133
80G0134
80M0037
80M0038
80M0039
80M0040
80M0041
80M0128
Collection
Color Name
Color #
Standard Color
for endcaps,
hembars & fascia
Bali
Marsh
80G0135 Bronze
Bali
E-Screen 1%
E-Screen 1%
E-Screen 1%
E-Screen 1%
E-Screen 1%
E-Screen 10%
E-Screen 10%
E-Screen 10%
E-Screen 10%
E-Screen 10%
E-Screen 10%
E-Screen 3%
E-Screen 3%
E-Screen 3%
E-Screen 3%
E-Screen 3%
E-Screen 5%
E-Screen 5%
E-Screen 5%
E-Screen 5%
E-Screen 5%
Oasis
Oasis
Oasis
Infiniti 3%
Infiniti 3%
Infiniti 3%
Infiniti 3%
Infiniti 3%
Infiniti 3%
Infiniti 5%
Infiniti 5%
Infiniti 5%
Infiniti 5%
Infiniti 5%
Infiniti 5%
Linen
Linen
Linen
Linen
Mocha
White/White
White/Linen
Charcoal/Bronze
Charcoal/Charcoal
Linen/Linen
White/White
White/Linen
Charcoal/Bronze
Charcoal/Charcoal
Pearl/Linen
Linen/Linen
White/White
White/Linen
Charcoal/Bronze
Charcoal/Charcoal
Linen/Linen
White/White
White/Linen
Charcoal/Bronze
Charcoal/Charcoal
Linen/Linen
Gold
Bronze
Platinum
PG2 Almond
PG 4 Stone
PG1 Cotton
VG4 Slate
QG1 Barley
VG1 Nickel
PG2 Almond
PG1 Cotton
VG2 Midnight
PG4 Stone
QG1 Barley
VG3 Bark
White
Ivory
Beige
Mushroom
80G0136
80M0053
80M0054
80M0055
80M0056
80M0129
80M0007
80M0008
80M0009
80M0010
80M0011
80M0130
80M0058
80M0059
80M0060
80M0061
80M0131
80M0002
80M0003
80M0004
80M0005
80M0132
80G0137
80G0138
80G0139
80P0095
80P0249
80P0096
80P0250
80P0098
80P0099
80P0101
80P0102
80P0103
80P0251
80P0104
80P0106
80G0140
80G0141
80G0142
80G0143
25
Bronze
White
White
Bronze
Black
Silver
White
White
Bronze
Black
Silver
Silver
White
White
Bronze
Black
Silver
White
White
Bronze
Black
Silver
Sand
Bronze
Black
Sand
Silver
White
Silver
Sand
Silver
Sand
White
Black
Silver
Sand
Bronze
White
Sand
Sand
Bronze
QMotion® Color Listings
Collection
Color Name Color #
Standard Color
for endcaps,
hembars & fascia
Collection
Color Name Color #
Standard Color
for endcaps,
hembars & fascia
Linen
Toffee
80G0144 Bronze
SW 2500 1%
Charcoal/Grey
80P0241 Silver
Linen
M-Screen
M-Screen
M-Screen
M-Screen
M-Screen
Island
Island
Island
Island
Matte
Matte
Matte
Matte
Matte
Nature Screen
Nature Screen
Nature Screen
Nature Screen
Cirrus
Cirrus
Cirrus
SW 2390 5%
SW 2390 5%
SW 2390 5%
SW 2390 5%
SW 2390 5%
SW 2390 5%
SW 2390 5%
SW 2410 3%
SW 2410 3%
SW 2410 3%
SW 2410 3%
SW 2410 3%
SW 2410 3%
SW 2410 3%
SW 2500 1%
SW 2500 1%
SW 2500 1%
SW 2500 1%
Mocha
White
White Stone
Charcoal/Apricot
Charcoal/Sable
Cocoa/Charcoal
Mushroom
Cherry
Brown
Chocolate
White
Linen
Fawn
Stone Duplex
Black/White
Black
Grey
White
Ivory
White
Ivory
Golden
Oyster
Oyster Beige
Oyster Pearl Grey
Beige Pearl Grey
Charcoal Grey
Charcoal
Charcoal Chestnut
Oyster
Oyster Beige
Beige
Charcoal Grey
Oyster/Pearl Grey
Beige Pearl Grey
Charcoal Chestnut
Oyster
Oyster/Pearl Grey
Oyster Beige
Beige Pearl Grey
80G0145
80M0018
80M0020
80M0017
80M0019
80M0021
80G0146
80G0147
80G0148
80G0149
80B0160
80B0161
80B0162
80B0163
80B0164
80G0150
80G0151
80G0152
80G0153
80G0154
80G0155
80G0156
80P0107
80P0108
80P0238
80P0110
80P0239
80P0112
80P0113
80P0114
80P0115
80P0116
80P0237
80P0236
80P0117
80P0120
80P0121
80P0240
80P0122
80P0124
SW 2500 1%
SW 2500 1%
Columns
Columns
Columns
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones
Tones Blackout
Tones Blackout
Chantilly
Chantilly
Chantilly
Chantilly
Chantilly
Chantilly
Charcoal
Charcoal Chestnut
White
Ivory
Brown
Red
Carnation
Rose
Cherry
Toffee
Brown
Aqua
Teal
Sea Foam
Black
Gray
Light Gray
Alabaster
Violet
Majesty
Navy
Royal Blue
Atlantic
Sky Blue
Powder
Turquoise
Otter
Sand
Wheat
Desert
Cream
Blizzard
Light Gray
Desert
White
Gray
Silver
Cream
Khaki
Toffee
80P0126
80P0127
80G0157
80G0158
80G0159
80J0172
80J0169
80J0170
80J0171
80J0173
80J0174
80J0175
80J0176
80J0177
80J0178
80J0179
80J0180
80J0181
80J0182
80J0183
80J0184
80J0185
80J0186
80J0187
80J0188
80J0189
80J0190
80J0191
80J0192
80J0193
80J0194
80J0195
80J0201
80J0207
80J0209
80J0210
80J0211
80J0212
80J0213
80J0214
Bronze
White
White
Bronze
Bronze
Bronze
Sand
Sand
Bronze
Bronze
White
Sand
Sand
Silver
Black
Black
Silver
White
White
White
White
Sand
White
Sand
Silver
Sand
Silver
Silver
Bronze
White
Sand
Sand
Silver
Silver
Sand
Bronze
White
Silver
Sand
Sand
26
Silver
Bronze
White
Sand
Bronze
White
White
White
Sand
Bronze
Bronze
Silver
White
White
Black
Silver
Silver
Silver
White
White
Silver
White
White
White
White
White
Sand
Sand
Sand
Sand
Sand
White
Silver
Sand
White
Silver
Silver
Sand
Sand
Bronze
QMotion® Color Listings
Collection
Color Name Color #
Standard Color
for endcaps,
hembars & fascia
Collection
Color Name Color #
Standard Color
for endcaps,
hembars & fascia
Chantilly
Brown
80J0215 Bronze
Vizela
Mississippi
80M0030 Sand
Chantilly
Chantilly Blackout
Chantilly Blackout
Chantilly Blackout
Eternity
Eternity
Eternity
Eternity Pearl
Eternity Pearl
Metallic
Metallic
Vizela
Vizela
Vizela
Black
White
Khaki
Black
Silver
Gold
Bronze
Pearl Platinum
Pearl Silver
Silver
Gold
Blanc
Chartreux
Loutre
80J0216
80J0217
80J0219
80J0220
80J0221
80J0222
80J0223
80J0224
80J0225
80J0226
80J0227
80M0027
80M0028
80M0029
Vizela
Flocke
Flocke
Flocke
Flocke
Flocke
Edessa
Edessa
Edessa
Edessa
Edessa
Edessa
Edessa
Edessa
Sahel
Sahel
Blanc
Mississippi
Loutre
Chartreux
Reef
Glacier
Beach
Savannah
Arctic
Desert
Tundra
Mesa
80M0031
80M0042
80M0043
80M0044
80M0045
80M0046
80M0252
80M0253
80M0254
80M0255
80M0256
80M0257
80M0258
80M0259
Black
White
Sand
Black
Silver
Black
Bronze
Black
Sand
Silver
Bronze
White
Silver
Silver
27
Sand
Sand
White
Sand
Silver
Silver
Sand
White
Sand
Sand
White
Sand
Bronze
Bronze
Accessories
Finishing touches for a beautiful QMotion experience.
Fascia
• Fascia is available in any of the 5 standard
colors or fabric wrapped. (White, Silver, Sand,
Bronze, Black)
• Fabric wrapped option covers front face and
bottom face of fascia.
• All fascia includes light sealing wool pile to
further assist in light blocking on the top of
the shade.
• All fabric wrapped fascia ship with the same
fabric and fabric color as the shade, unless
otherwise requested.
• Shipping charges for fascia are included with the
shade if ordered with the shade, unless there are
excess size charges from the freight carrier.
• Fascia not ordered to fit individual shades will be
charged additional shipping charges.
• To ensure proper fit and function, inside
mount fascia are cut 1/16” less than the top
window width. Outside mount fascia are cut 1/4”
larger than the bracket to bracket dimensions.
• For applications when fascia depth does
not meet the minimum depth requirements,
please contact your customer care representative for fit and finish options.
Fascia endcap options
28
• Fascia endcaps provide a clean look to the
sides of the fascia on outside mounts or when
the fascia extends out from the window frame
on inside mounts.
• Endcaps are color coordinated with fascia.
• All fascia orders include endcaps.
• For inside mount applications, if fascia
extends beyond opening, endcaps may be
cut in the field for custom fit.
• For inside mount applications, where window
opening depth exceeds shade and fascia
depth, no endcaps are needed.
• Endcaps extend 1/16” beyond fascia.
QMotion® Controls
QMotion® Single Channel 5 Button Remote
•
•
•
•
5 buttons to support up, down, 25% 50%, 75%
Magnetic back for simple storing to wall plates
Controls unlimited number of shades in a group
Normal remote range: 30 feet
UP
DOWN
QMotion® Programmable Timer Remote
• Programmed automated settings in addition to the
single channel 5 button remote controls
• Low transmission power, must locate close to shades
or Qrelay
• Supports as many as 6 events
• Windows PC programmable
• Time of day, days of week, sunrise/sunset settings
• Normal remote range: 10 feet
QMotion® Multichannel Remote
• Up to 6 individual or group settings
• All shades programmed to a multichannel remote are controlled
together with an “ALL” button on same remote
• Supports up, down, 25%, 50%, 75% actions
• LED light feedback
• Motion activated zone indicated when remote is moved
• Normal remote range: 30 feet
29
25%
50%
75%
QMotion® Qconnect
The Qconnect Interface is a bridge between our
language and most building or home automation
systems. With drivers for many popular systems,
and easy programming tools, clients can easily
drive QMotion® Automated shades with their new
or existing control systems.
•
•
•
•
•
•
•
•
Qconnect is compatible with:
RS-232 serial
RS-485 serial
Dry contact interface
15 channel
9v DC power supply or power over CAT 5
Desk or wall mountable
4,000 foot wiring range
Normal remote range: 50 feet
QMotion® Qrelay
Each installation is different, and environmental factors may
have an effect on transmission. In some cases, a Qrelay may
be helpful in improving signal reception. To consider in
advance, if a room is over 12’x12’, or a shade is 30’ from
where it would be controlled, the Qrelay is recommended.
As these dimensions increase, the Qrelay will become
increasingly helpful, and spaces significantly larger may
even benefit from more than one Qrelay.
•
•
•
•
Extends range of all QMotion remotes.
Use as many as required in an installation (no limits)
Powered from a wall outlet or from a powered USB port
Two modes of operation “Zone Specific” and “Echo”
-Zone specific mode allows individual remotes to be learned to the repeater
-Echo mode repeats all valid Qmotion remote commands
• Normal remote range: 30 feet
30
QMotion® Qsync
QMotion® Smartphone Application “App” Features:
• Control Qmotion shades with iOS devices
-Android mobile devices coming soon
• Virtual Shade: Drag your finger to place the shade to the
desired positions
• Connects automatically to Wifi* and Bridge. “Plug and Play”
• Channel System to name, take and set reference photo to group shades.
• Step by Step setup for learning, setting lower limit, and deleting shades
• Control nearly 500 shades or groups from each Qsync
• TCP/IP to 433Mhz bridge
*(Automatic Wifi Connection not available on iOS)
QMotion® Hembar Activation
QMotion® Shades incorporate patented and unique
tug features that allow the shade to open with just
a short tug, or be lowered without the remote.
Tug the hembar less than 1”
• Shade opens to next highest preset position
(example: shade moves from 75% to 50%)
Tug the hembar downward between 1” - 2”
• Shade moves to full open
Tug the hembar MORE than approximately 2”
• Shade remains at position stopped until pulled or
sent up with a remote
Two successive tugs MORE than approximately 2”
• Shade moves to full open
31
QMotion® Wall Docking Station
For the convenience of the user, consider QMotion® Wall Docking Stations.
Available in Single, Double or Triple gang versions, these wall
plates are built to install on a wall as a place to retain the transmitters used
in a project. Remote controls hold in place on the Docking Station via a
strong magnet, and allow the remote controls to be used as a wall switch
for a third level of control for the shades. Wall plates are flush mounted and
do not require routing a hole in drywall or other mounting wall finishes. For
public spaces, or other places where a remote should be “permanently”
attached to a wall, our Wall Station Adaptors mount around the remotes,
making them virtually impossible to remove without a screwdriver.
Single Wall Station
Double Wall Station
4.75”
4.75”
3”
Triple Wall Station
4.75”
7.859”
5.431”
Multichannel-Double
Multichannel-Single
Wall Station Adaptors
4.75”
4.75”
4.4”
4.4”
3”
5.5”
2.6”
2.6”
32
Customer’s Own Material (C.O.M.)
In circumstances where the QMotion® Shades fabric assortment is not similar to a desired material,
customers may supply the fabric for the shade, and QMotion® will manufacture the shade using this material.
Often this is not using roller shade fabric and performance will vary with the type of finish of the fabric. Please
verify with your fabric supplier that the fabric can perform properly on a flat roller shade.
For a nominal fee of $50 (non refundable) a dealer can get a COM material qualified. To qualify COM
material, the dealer must supply the following information to a QMotion® Customer Service Representative:
1) Fabric specifications (weight & thickness) and 2) A 1’ x 1’ sample material shipped to 3400 Copter Rd,
Pensacola, FL 32514. Note: Quotes using a COM material are not valid until qualified and approved by
QMotion® engineers. QMotion® reserves the right to decline any COM material that does not meet quality
specifications All fabric must be shipped to us in ready to use condition, as we will not inspect for quality.
Contact our Customer Care Team for material and testing requirements.
Special Ordered Material (S.O.M.)
In cases where customers desire a material from a supplier of roller shade fabric. This may be colors
of our standard styles which are not stocked, or styles from other major suppliers. Please consult with your
Qmotion® Customer Care Representative for information about specific fabrics, including pricing and lead
times.
Note that in the case of
both C.O.M. and S.O.M.,
there are extended lead
times due to inbound
freight and production
scheduling.
33
QMotion® Measurement Instructions
Inside Mount
Outside Mount
Measure and assess area to be covered:
· Measure opening to be covered vertically and horizontally in three places.
· If vertical measurements vary more than 1/2” we recommend an outside mount.
· If horizontal measurements vary more than 1/2” we recommend an outside mount.
· Measure and compare diagonals to determine if opening is square.
· If corner to corner diagonal measurements vary more than 1/2” we recommend an outside mount.
· Use a level to determine if opening is plumb and square.
· If out of square or out of plumb by more than 1/2” we recommend an outside mount.
Measurement rules:
· Make all measurements to the nearest 1/16”. On inside mount applications, round down.
· Measure all windows, even if they appear to be the same size.
Considerations:
· There must be significant support structure to hold the shade, i.e. wood, concrete,
anchored drywall, etc.
· For drywall you may use heavy duty auger style drywall anchors rated sufficient for the
weight of the shade.
· Standard roll or reverse roll are available. Reverse roll may be needed to free shade path from
obstructions, i.e. handles, locks, alarm sensors, molding, trim, etc.
34
QMotion® Measurement Instructions (cont.)
Required order form measurements for INSIDE
MOUNT:
· Use the top horizontal measurement for TOP WIDTH. This is outside of bracket to outside
of bracket.
· Use the largest vertical measurement for HEIGHT.
· Measure and record DEPTH. Use the minimum
distance from the outside of opening to the
window including window mullions if they exist.
This is important in determining if the shade and
fascia will protrude into the room and out of the
opening.
Required order form measurements for OUTSIDE
MOUNT:
· Determine FABRIC WIDTH based on largest
horizontal measurement PLUS total desired
side overlap.
· Minimum 1.5” side overlap is recommended.
· Establish WIDTH dimension by adding 1” to
the FABRIC WIDTH. This is outside of bracket
to outside of bracket. (Note: Brackets extend
beyond FABRIC WIDTH by 1/2” on each side.)
· Determine HEIGHT by adding 3.25” to largest
vertical measurement and desired Sill overlap.
Minimum 1” Sill overlap is recommended.
35
36
37
Shade Type (Select
P
P
P
P
P
P
S / M / P
S / M / P
S / M / P
S / M / P
S / M / P
S / M / P
5
6
7
8
9
10
.
/
P
S / M / P
4
Qbasic (QB)
QMotion Dual (QD)
______ # Single Channel Wallplate
______ # Multichannel Wallplate
______ # Qrelay
______ # Four Shade Power Distribution Box
______ # Programmable Timer Remote
______ # Single Shade Power Supply
Notes:
______ # Single Channel Remote
QMotion LV (QV)
Manual
Qfree (QF)
Motorized
Qmotion (QM)
______ # Multichannel Remote
Accessories:
Shade Types:
______ # Multichannel Double Wallplate
______ # Four Shade Power Supply
______ # Qconnect
/
/
/
/
/
/
F
F
F
F
F
F
F
F
F
F
Email
City
I / O
I / O
I / O
I / O
I / O
I / O
I / O
I / O
I / O
I / O
Clutch or
L / R
L / R
L / R
L / R
L / R
L / R
L / R
L / R
L / R
L / R
Right (R)
Left (L)
Wire Side
Low Voltage
inches
Reverse (R)
S / R
S / R
S / R
S / R
S / R
S / R
S / R
S / R
S / R
S / R
Bracket)
Standard (S)
Width*
Roll
Direction (Bracket to
inches
Height
State
Name
S /R/D
S /R/D
S /R/D
S /R/D
S /R/D
S /R/D
S /R/D
S /R/D
S /R/D
S /R/D
Cassette ( C)
Dual ( D )
Reverse ( R )
Standard ( S )
Style
Cassette
Finish***
Cassette
Fascia or
Optional Fascia
Fascia or
Zip
______ # Sixteen Shade Power Panel
______ # Qsync (iPhone)
______ # Side Channels
______ # Single Channel Triple Wallplate
______ # Sill Channel
3/1/2013
______ # Wall Station Adaptor
*** Fascia finish - (W) White, (BL) Black, (SI) Silver, (SA) Sand, (BR) Bronze, (FW) Fabric Wrap.
-For IB (inside mount) motorized/ independent fascia applications, QMotion will take a 1/16’’ factory deduction off the bracket
to bracket dimension.
-For OB (outside mount) motorized/ independent fascia applications, QMotion will add ¼’’ to the bracket to bracket dimension
-For Exact fascias, please specify the exact width for the fascia in the NOTES column
______ # Single Channel Double Wallplate
*For all IB (inside mount) applications, QMotion will take a factory deduction of 1/8’’ from the bracket to bracket dimension
Use additional pages for more shades on this order.
Please do not place multiple jobs on the same order form.
/
P
S / M / P
/
/
Outside ( O )
Fabric ( F )
3
Name
Inside Exact ( I )
Painted ( P )
P
Number
Mount
S / M / P
Location
Date:
[email] qmotionsales@homerunholdings.com
Shade Build Specifications
Hembar Finish
2
one per row)
Fabric
Phone
Address
P
Type
Fabric
Zip
S / M / P
Quantity
Window
State
Ship To:
1
Item
Line
Remote
Email
Phone
Enter data or circle letter.
City
Address
Dealer/ Customer Name
Job #/Sales Order/ Side Mark:
Return to: [Fax] (850) 208-3409
38
QMotion® Automated Shades
Reference Information
39
QMotion® Setting Hembar Position
For shades produced prior to April 14th, 2013.
Lowering the Lower Limit
1.
2.
3.
4.
5.
6.
Press and release the DOWN button.
Shade moves to preprogrammed lower limit.
Press and hold the DOWN button until the shade jogs, release.
Tug shade more than 2” to put shade into learn mode.
Manually pull shade down to lower the lower limit.
Once desired position is achieved press and hold the DOWN button until the shade
begins to travel up then release.
7. The shade will travel to the top and now the lower limit is set.
Note: 25%, 50%, and 75% positions will reset automatically
Raising The Lower Limit
1.
2.
3.
4.
5.
Press and release the DOWN button.
Shade moves to preprogrammed lower limit.
Press and hold the DOWN button until the shade jogs, release.
Tug shade more than 2” to put shade into learn mode.
Press and release the UP button, let the shade travel up past previous lower
limit, press and release the DOWN button to stop.
6. Manually pull to lower limit.
7. Once desired position is achieved press and hold the DOWN button until the
shade begins to travel up then release.
8. The shade will travel to the top and now the lower limit is set.
Note: 25%, 50%, and 75% positions will be set automatically
Custom Intermediate Positions
To Set Custom Intermediate Positions HIGHER or LOWER
Than Factory Preprogrammed Positions
1.
2.
3.
4.
5.
Send shade to intermediate position that you wish to change.
Press and hold that INTERMEDIATE button until the shade jogs, release.
Tug shade more than 2” to put into learn mode.
Move the shade to the custom position by manually tugging or using the up button.
Once desired position is achieved press and hold the INTERMEDIATE button until
the shade begins to travel up then release.
6. The shade will travel to the top and now the custom intermediate position is set.
40
QMotion® Setting Hembar Position
For shades produced on or after April 15th, 2013.
Setting Any Position Location
Qmotion shades produced after April 15, 2013 have the additional ability
to program the upper stop position. These instructions may be followed
the same for each button programming operation, substituting the desired
button to be programmed during this process.
1.
Send the shade to the position to be changed.
2.
Press & Hold the button desired to be changed after the shade has stopped
(ex. if the position to be programmed is the upper limit, press and hold
the UP button)
3.
After about 5 seconds the shade will Jog down 3 inches and back up.
a.
Release the position button to be changed.
b.
Tug the shade 6 inches to enter learn mode for the button position.
c.
Move the shade to the new position by hand or press the UP button
3 times to send the shade to the TOP, then pull down to the desired
position.
d.
Press and Hold the position button to be set until the shade begins
to move UP.
e.
The shade will travel to the “hard stop”, the new position has been set.
41
QMotion® Remote Settings
For shades produced prior to April 14th, 2013.
Adding an Additional Remote
1. Move the shade to full open.
2. Press and hold the UP button on a learned remote until the shade begins
to move, release.
3. Shade will move to the 75% position.
4. Tug the shade more than 2” to put into learn mode.
5. Press and hold UP button on the new remote until the shade begins to travel up.
6. New remote is learned.
Deleting A Remote
1. Move the shade to full open.
2. Press and hold the UP button on a learned remote until the shade begins
to move, release.
3. Shade will move to the 75% position.
4. Tug the shade more than 2 inches to put into learn mode.
5. Press and hold DOWN button on the remote or channel to be deleted until
the shade begins to travel up.
6. Remote or channel is deleted.
Full Master Reset Procedure
This procedure clears all original learned remote AND all hembar settings
1. Move the shade to full open.
2. Press and hold the up button on a learned remote until the shade starts moving,
do not release until shade reaches the 75% position and reverses, then release.
3. Shade will stop about 12 inches from the top.
4. Immediately tug shade more than 2 inches to delete all learned remotes and limits.
5. Shade will now be in learn mode for 60 seconds.
6. Learn a new remote by pressing and holding UP button on the remote until the
shade begins to move up. Lower limit will now be set to factory default 12 inches.
42
QMotion® Remote Settings
For shades produced on or after April 15th, 2013.
Adding or Deleting a Remote
1.
Send the shade to Top/Upper limit.
2.
Press & Hold the UP button after the shade has stopped.
3.
After about 5 seconds the shade will jog down 3 inches and back up.
Keep holding the UP button, do not release.
4.
After about 10 seconds the shade will start traveling to the 75% position
a.
Release the Up button.
b.
After the shade stops at 75%, tug the shade 6 inches. The shade is
now in learn mode.
i.
To Add a remote Press and Hold the UP button on the desired new remote or channel until the shade begins to move Up.
ii.
To Delete a remote Press and Hold the DOWN button on the desired remote or channel to be deleted until the shade begins to move Up.
c.
New remote or channel is added or deleted.
43
QMotion® Remote Settings
For shades produced on or after April 15th, 2013.
Factory Reset Then Adding a Remote
1.
Send the shade to Top/Upper limit.
2.
Press & Hold the UP button after the shade has stopped.
3.
After about 5 seconds the shade will Jog down 3 inches and back up.
Keep holding the UP button, do not release.
4.
After about 10 seconds the shade will start traveling to the 75% position.
Keep holding the UP button, do not release.
5.
After about 15 seconds the shade will begin to travel to the Default Shade Length. (About 20 inches). Release the UP button.
a.
When the shade stops it will be ready to perform a Factory Reset.
b.
Tug the shade more than 6 inches within 10 seconds of the shade
stopping to perform a Factory Reset.
c.
The Factory Reset will, delete all remotes from the shade memory, and
reset all programmed positions to Factory Default settings.
d.
The shade will be in learn mode for adding new remotes for one minute.
e.
Press and Hold the Up Button on a new remote or channel until the shade
begins to move Up.
f.
If a new remote is not added within one minute, the shade will exit Learn
Mode for Remotes and can only be operated through tugs. A new remote
can only be added by performing
i.
2 Button Press procedure with a Multichannel remote or
USB remote.
ii.
Removing and reapplying power to the shade, followed by
step e. of this section.
44
Brackets (Universal Back Mount)
(Automated and Qfree)
2.6 Universal Bracket Back Mount, No Cover
2.6 Universal Bracket Back Mount, Cover
2.6 Universal Bracket Back Mount, No Cover, Reverse
45
Brackets (Universal Back Mount)
(Automated and Qfree)
2.6 Universal Bracket Back Mount, With Cover, Reverse
3.3 Universal Bracket Back Mount, No Cover
3.3 Universal Bracket Back Mount, With Cover
46
Brackets (Universal Back Mount)
(Automated and Qfree)
3.3 Universal Bracket Back Mount, No Cover, Reverse
3.3 Universal Bracket Back Mount, With Cover, Reverse
47
Brackets (Universal Top Mount)
(Automated and Qfree)
2.6 Universal Bracket Top Mount, No Cover
2.6 Universal Bracket Top Mount, With Cover
48
Brackets (Universal Top Mount)
(Automated and Qfree)
3.3 Universal Bracket Top Mount, No Cover
3.3 Universal Bracket Top Mount, With Cover
49
Dual Brackets
(Automated and Qfree)
2.5 Dual Bracket
*Standard roll application only
3.7 Dual Bracket
*Standard roll application only
50
Brackets (2.5)
Universal Bracket
Outside Mount Bracket
Pocket/Reverse Bracket
51
Brackets (3.7)
Universal Bracket
Pocket/Reverse
Bracket
*Some installation may
require L-Bracket
52
Fascia Brackets
(Automated and Qfree)
2.6 Fascia Bracket
3.3 Fascia Bracket
4.3 Fascia Bracket
53
Cassette
Single Cassette
Qlink
* R.U.D. indicates the maximum likely diameter on the system. Check fabric charts for specific shade diameters.
54
QMotion® Independent Fascia
2.5
Standard Fascia
Reverse Fascia
Dual Bracket Fascia
55
3.7
QMotion® Fascia (2.6”)
Standard Fascia
Reverse Fascia
56
QMotion® Fascia (3.3”)
Standard Fascia
Reverse Fascia
57
QMotion® Fascia (4.3”)
Standard Fascia
Reverse Fascia
58
Qlink Fascia
3.7
Standard Fascia
2.5
Reverse Fascia
59
3.7
Qbasic Fascia
QB-17 with Independent/Reverse Fascia
QB-28 with Snap On Fascia
QB-28 with Independent/Reverse Fascia
Shade Mounting Dimensions
For our various shade choices these drawings can help determine the minimum required space in the window
for mounting.
Qbasic QB-17
Qbasic QB-28
* R.U.D. indicates the maximum likely diameter on the system. Check fabric charts for specific shade diameters.
60
Copyright Notice and Disclaimer
All rights reserved. No parts of this manual may be reproduced in any form without the express written
permission of Qmotion®. Qmotion® makes no representations or warranties with respect to the contents
hereof. In addition, information contained herein are subject to change without notice. Every precaution has
been taken in the preparation of this manual. Nevertheless, Qmotion® assumes no responsibility for errors or
omissions or any damages resulting from the use of the information contained in this publication.
c
2013 HomeRun Holdings Corporation. Qmotion® is a trademark of HomeRun Holdings Corporation.
Environmental Statement
RoHS COMPLIANT
WEEE (Waste Electrical and Electronic Equipment) Statement
Disposal of Waste Equipment by Users in Private Household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your
other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.
61
Limited Warranty
HomeRun Holdings Corporation, (the “Manufacturer”) warrants that this Qmotion® window shade product
will be free from defects in materials and workmanship for 5 years, beginning from the date first sold to the
commercial or residential consumer who has, or intends to, use the product, as evidenced by such
consumer’s proof of purchase:
Exclusions From this Limited Warranty: This limited warranty shall be null and void and no part of it shall
apply if any one of the following occur: 1) the product has not been properly installed by a qualified installer in
accordance with all Manufacturer specifications; 2) the product has been subject to unauthorized service; 3)
the product has been subject to mis-handling, misuse, or abuse; 4) the product has been modified;
5) the product has suffered damage resulting from lightning, power surges, vandalism, fire, earthquake, acts
of nature, or any other cause which the product was not designed to withstand; 6) the product has been
used, or attempted to be used, for other than the customary usage or for other than the product’s intended
use; 7) the product has not been maintained; 8) damage to the product caused by battery decay or corrosion.
This Limited Warranty extends only to the original owner. This Limited Warranty is not transferable. This
Limited Warranty does not cover normal wear or tear or deterioration which occurs with the passage of time.
Batteries originally provided with a new product, if any, are produced by a third party and are not warranted by
Manufacturer.
No employee, distributor, dealer, agent or representative is authorized to change the terms of this Limited
Warranty in any way, to extend the warranty time periods, or to grant additional warranties, and no attempt
to do any of the foregoing will be binding upon Manufacturer.
IF THIS LIMITED WARRANTY COVERS A CONSUMER PRODUCT, AS DEFINED BY THE MAGNUSONMOSS WARRANTY ACT, THEN NO WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, BUT NOT
LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE)
SHALL EXTEND BEYOND THE APPLICABLE TIME PERIOD STATED IN BOLD FACE TYPE ABOVE. IF
THIS LIMITED WARRANTY COVERS A COMMERCIAL PRODUCT, THEN THIS LIMITED WARRANTY IS IN
LIEU OF ALL OTHER REPRESENTATIONS, GUARANTEES, OR OTHER EXPRESS OR IMPLIED WARRANTIES (INCLUDING, WITHOUT LIMITATION, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE) AND ALL SUCH OTHER EXPRESSED OR IMPLIED WARRANTIES ARE HEREBY
SPECIFICALLY DISCLAIMED.
Claims for defects in material and workmanship covered by this Limited Warranty must be made in writing
to the dealer from whom the product was originally first purchased within the warranty period stated above.
Manufacturer may either send a service representative or have the product returned to Manufacturer’s
62
facility, at Buyer’s expense, for inspection. If judged by Manufacturer to be defective in material or
workmanship, and to otherwise be covered by this Limited Warranty, the product will be replaced or repaired
at the option of Manufacturer, in its sole and absolute discretion, free from all charges except authorized
transportation and replacement labor. Replacement labor, transportation costs, and any other costs or
charges by the dealer, wholesaler, distributor, contractor, or installer are not covered by this Limited Warranty.
Any replacement unit may be a model determined by Manufacturer to be equivalent to the defective model,
or a product that has been factory refurbished. The remainder of original warranty period will apply to any
repair/replacement unit.
THE REMEDIES OF BUYER SET FORTH IN THIS LIMITED WARRANTY ARE EXCLUSIVE AND ARE IN LIEU
OF ALL OTHER REMEDIES. THE LIABILITY OF MANUFACTURER WHETHER IN CONTRACT, TORT,
UNDER ANY WARRANTY OR OTHERWISE, SHALL NOT EXTEND BEYOND ITS OBLIGATION TO REPAIR
OR REPLACE, AT ITS OPTION, ANY PRODUCT OR PART FOUND BY MANUFACTURER TO BE DEFECTIVE
IN MATERIAL OR WORKMANSHIP AND OTHERWISE SUBJECT TO THIS LIMITED WARRANTY.
MANUFACTURER SHALL NOT BE RESPONSIBLE FOR ANY DIRECT, INDIRECT, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE.
This Warranty gives specific legal rights and Buyer may have other rights, which may vary from state to state.
However, some states do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages so the above limitations or exclusions may not apply
specific buyers.
63
3400 Copter Road
Pensacola, FL 32514
Ph: 877.849.6070
Fax: 850.208.3409
qmotioninfo@qmotionshades.com
qmotionshades.com
Download PDF