Miller Electric | 230Volt | Maxstar® 150 STH - Promociones Praxair

Issued May 2014 • Index No. DC/27.2
Maxstar 150 STH
®
Quick
Specs
Light Industrial Applications
Processes
Process Pipe
Dairy Industry
Food/Beverage Industry
Restaurant/Kitchen Repair
Experimental Aircraft
Shipboard Installation/Repair
Maintenance Repair
TIG (GTAW)
Pulsed TIG (GTAW-P)
Stick (SMAW)
TIG/Stick Welding
Power Source
Amperage Range 115 VAC: 5 – 150 A (DC TIG)
20 – 100 A (DC Stick)
230 VAC: 5 – 150 A (DC TIG)
20 – 150 A (DC Stick)
Input Power
Max. Open-Circuit Voltage 90
Single-Phase Power
Net Weight 13.7 lb. (6.2 kg)
Pulse. Pulsing can increase puddle
agitation, arc stability and travel speeds
while reducing heat input and distortion.
Allows for any input voltage hookup
(115–230 V) with no manual linking,
providing convenience in any job
setting. Ideal solution for dirty or
unreliable power.
High frequency for non-contact arc
initiation that reduces tungsten and
material contamination.
Selectable trigger configuration
allows the operator to choose
standard or 2T trigger method to meet
the application.
Single amperage range allows
operator to accurately set amperage on
both 115 or 230-volt primary power.
Multi-Voltage Plug (MVP™) allows
for connection to 115 or 230-volt
receptacles without tools by choosing
the plug that fits the receptacle and
connecting it to the power cord.
Portable in the shop or at the
job site — at 13.7 pounds, the
shoulder strap allows the end
user to easily move from location
to location.
Lift-Arc start provides TIG arc
initiation without the use of high
frequency.
™
Full function remote control for
precise amperage control for critical
welds on thin materials (6-pin
fingertip or foot control available.)
Thermal overload protection
with indicator light helps prevent
machine damage if the duty cycle
is exceeded or airflow is blocked.
Inverter-based, DC power source has
a simple-to-use operator interface
providing only the necessary controls
in a compact machine.
Hot Start™ adaptive control provides
positive arc starts without sticking.
TIG/Stick Package (#907 136 017) comes complete with:
Maxstar 150 STH power source
10-ft. (3 m) MVP™ power cord
MVP™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A)
X-CASE™ provides protection in transport and storage
Remote fingertip control
Weldcraft® A-150 (WP-17) 12.5-ft (3.8 m) TIG torch with connector
Stick electrode holder with 13-ft. (4 m) cable and 25-mm
Dinse connector
Work clamp with 10-ft. (3 m) cable and 25-mm Dinse connector
Miller | Smith flow gauge regulator with gas hose
AK2C accessory kit
Shoulder strap
Best-in-class Stick arc characteristics for those demanding jobs.
Low OCV Stick is a simple design that
reduces the open-circuit voltage to
12–16 volts when the welding power
source is not in use. This circuit
design is now built into the Maxstar
150 STH eliminating the need for
add-on voltage reducers.
Power Factor Corrected (PFC) for
optimum performance especially
on 115 volt — reduces nuisance
breaker tripping.
Fan-On-Demand™ power source
cooling system operates only when
needed, reducing noise, energy use
and the amount of contaminants
pulled through the machine.
Built-in gas solenoid eliminates the
need for bulky torch with a gas valve.
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
Equipment Sales US and Canada
An ITW Company
1635 West Spencer Street
P.O. Box 1079
Appleton, WI 54912-1079 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
MillerWelds.com
Specifications (Subject to change without notice.)
Welding
Mode
TIG
KVA
KW
5 –100 A
100 A at 14.0 VDC, 100% Duty Cycle
18.4
2.1
2.1
5 –150 A
100 A at 14.0 VDC, 100% Duty Cycle
18.4
2.1
2.1
150 A at 16.0 VDC, 30% Duty Cycle
28.0
3.4
3.1
100 A at 14.0 VDC, 100% Duty Cycle
8.3
2.0
1.9
150 A at 16.0 VDC, 30% Duty Cycle
14.2
3.2
3.1
Input Power
115 VAC, 15 A
115 VAC, 20 A
230 VAC
Stick
Rated Welding Output
Amps Input at
Rated Output,
50/60 Hz
Welding
Amperage
Range
5 –150 A
115 VAC, 15 A
20 –70 A
70 A at 22.8 VDC, 100% Duty Cycle
17.4
2.0
1.9
115 VAC, 20 A
20 –100 A
70 A at 22.8 VDC, 100% Duty Cycle
17.4
2.0
1.9
100 A at 24.0 VDC, 35% Duty Cycle
26.4
3.0
3.0
230 VAC
20 –150 A
100 A at 24.0 VDC, 100% Duty Cycle
13.1
3.0
2.8
150 A at 26.0 VDC, 30% Duty Cycle
21.6
4.9
4.7
Max. OpenCircuit Voltage
90 VDC,
12–16 VDC*
Dimensions
H: 9 in.
(229 mm)
W: 5.5 in.
(140 mm)
D: 13.25 in.
(337 mm)
Net
Weight
13.7 lb.
(6.2 kg)
*Sense voltage for Stick and Lift-Arc TIG.
Control Panel
8
1
2
3
9
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
4
5
6
TIG HF Impulse Selector Light
Pulsed TIG Selector Light
Amperage Adjustment Control
TIG Selector Light
Stick Selector Light
Process Selector Touch Pad
Positive Weld Output Receptacle
Ready Light
Overtemperature Light
Negative Weld Output Receptacle
with Flow Thru
10
7
Performance Data
VOLT/AMP CURVES
DUTY CYCLE CHART
100
80
200
Stick (230 V)
TIG (115 V 20 A & 230 V)
230 V TIG/Stick Max
150
VOLTS
OUTPUT AMPERES
250
Stick (115 V 20 A)
100
60
115 V TIG/Stick Max
40
TIG Min
20
50
TIG/Stick (115 V 15 A)
Stick Min
0
10
20
40
% DUTY CYCLE
2
60
80
100
0
0
50
100
AMPS
150
200
Maxstar 150 STH Package
®
Standard Package #907 136
Package includes:
Maxstar 150 STH power source
10-ft. (3 m) MVP™ power cord
MVP™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A)
Stick electrode holder with 13-ft. (4 m) cable and 25-mm Dinse connector
Work clamp with 10-ft. (3 m) cable and 25-mm Dinse connector
One air-cooled TIG torch connector (#195 234)
Shoulder strap
TIG/Stick Package #907 136 017
Package includes:
Maxstar 150 STH power source
10-ft. (3 m) MVP™ power cord
MVP™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A)
X-CASE™ — provides protection in transport and storage
Remote fingertip control (#195 184)
Weldcraft® A-150 (WP-17) 12.5-ft. (3.8 m) TIG torch with connector
Stick electrode holder with 13-ft. (4 m) cable and 25-mm Dinse connector
Work clamp with 10-ft. (3 m) cable and 25-mm Dinse connector
Miller | Smith flow gauge regulator with gas hose
AK2C accessory kit with short back cap, nozzles, collets, collet bodies, and
2% ceriated tungsten electrodes (.040, 1/16, and 3/32 in.)
Shoulder strap
Genuine Miller Accessories
®
Remote Controls and Switches
X-CASE™ #300 184
Sturdy case provides ultimate protection
for transport and storage. Also features
convenient top carrying handle and side
recessed hand grips. Store the Maxstar 150,
accessories and gear in this generous case
to be ready to go at any time. Dimensions
(H x W x D): 13 x 10.5 x 30.625 in. (330 x
267 x 778 mm).
RCCS-6M (6-pin plug)
#195 184 13.25-ft. (4 m) cord
#195 503 26.5-ft. (8 m) cord
North/south rotary-motion fingertip
current/contactor control fastens to TIG
torch using two Velcro straps. Great for
applications that require a finer amperage
control. Includes cord and plug.
®
RFCS-6M (6-pin plug)
#195 183 13.25-ft. (4 m) cord
#195 504 20-ft. (6 m) cord
Foot pedal current/contactor
control. Includes cord and plug.
Female Receptacle
Adapter Cord, Full KVA #300 517 Field
NEMA 14-50P to NEMA 6-50R. Adapts
engine drive 120/240 V plug to Maxstar
240 V plug.
RMS-6M (6-pin plug) #195 269
Momentary-contact switch for contactor
control. Rubber-covered pushbutton
dome switch ideal for repetitive on-off
applications. Includes 26.5-ft. (8 m) cord
and plug.
TIG Torches
Weldcraft® Air-Cooled Torches
#WP-17-12-R A-150 (WP-17) 12.5-ft.
(3.8 m) TIG torch with gas thru connector
#WP-17-25-R A-150 (WP-17) 25-ft. (7.6 m)
TIG torch with gas thru connector
Air-Cooled TIG Torch
Connector #195 234
25-mm (small) Dinse-style
gas thru for one-piece air-cooled torch.
MVP™ Plugs
#219 258
For power cable 6-50P
(230 V/50 A).
Included with machine.
#219 261
For power cable 5-15P
(115 V/15 A).
Included with machine.
#219 259
For power cable 5-20P
(115 V/20 A). Optional, not
included with machine.
3
Ordering Information
Power Source and Options
Stock No.
Description
Maxstar 150 STH Standard Package
#907 136
Maxstar 150 STH with electrode holder, work clamp, and MVP cord and plugs
Maxstar® 150 STH TIG/Stick Package
with Remote Fingertip Control
#907 136 017
Includes #907 136 plus X-CASE™, A-150 TIG torch, gas regulator with hose,
AK2C accessory kit, and remote fingertip control
Maxstar® 150 STH (International)
#907 352
115/230 VAC, 50/60 Hz, CE
X-CASE™ (only)
#300 184
Carrying case for Maxstar 150 STH
Adapter Cord, Full KVA
#300 517
Adapts engine drive 120/240 V plug to Maxstar 240 V plug
RCCS-6M
#195 184
#195 503
13.25-ft. (4 m) remote fingertip control
26.5-ft. (8 m), remote fingertip control
RMS-6M
#195 269
26.5-ft. (8 m) remote on/off control
RFCS-6M
#195 183
#195 504
13.25-ft. (4 m) remote foot control
20-ft. (6 m) remote foot control
#195 234
Connects the A-125, A-150 and A-80 Weldcraft torches to
25-mm gas thru Dinse connector
MVP 230 V 6-50P
#219 258
Used to connect power source to 6-50R receptacle. Included with machine
MVP 115 V 5-15P
#219 261
Used to connect power source to 5-15R receptacle. Included with machine
MVP 115 V 5-20P
#219 259
Used to connect power source to 5-20R receptacle.
Optional, not included with machine
®
Qty.
Accessories
Weldcraft® A-150 (WP-17) TIG Torch
Air-Cooled TIG Torch Connector
See page 3
MVP™ Plugs
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price
Download PDF