AT-HD-V88M - Extron Electronics

IP Link® De vice Interface
Communication Sheet
atna_15_4582_1.pke
Revision: 9/29/2010
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Matrix Switcher
Atlona
N/A
AT-HD-V88M
Version History:
Driver
Version
Date
1
9/24/2010
IP Link
Compiler
GC
Version
1.4.0
3.0.3
Notes
Initial version.
Driver Notes:
This device does not support bi-directional communication.
Page 1 of 3
IP Link® De vice Interface
Communication Sheet
atna_15_4582_1.pke
Control Commands & States:
Output 1
1 to 8
Output 2
1 to 8
Output 3
1 to 8
Output 4
1 to 8
Output 5
1 to 8
Output 6
1 to 8
Output 7
1 to 8
Output 8
1 to 8
Powe r Control
On
Off
Status Available:
Status Unavailable
MLC62 Supported Commands:
Output 1
1 to 8
Output 2
1 to 8
Output 3
1 to 8
Output 4
1 to 8
Output 5
1 to 8
Output 6
1 to 8
Output 7
1 to 8
Output 8
1 to 8
Powe r Control
On
Off
Page 2 of 3
Revision: 9/29/2010
atna_15_4582_1.pke
IP Link® De vice Interface
Communication Sheet
Revision: 9/29/2010
Cable and Adapter Requirements:
M/F RS-232 straight serial cable (Extron Electronics P/N 26-433-XX)
Notes for the Device:
Serial communication:
Port Type : RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 3 of 3