User's Manual

USB 3.0 Dual Display Docking Station
CSV-3242HD
Table of Contents
SAFETY INSTRUCTIONS
COPYRIGHT
TRADEMARKS
INTRODUCTION
FEATURES
PACKAGE CONTENTS
SYSTEM REQUIREMENTS
PRODUCT OVERVIEW
FRONT
REAR
INSTALLATION
DISPLAY CONFIGURATION
DESCRIPTION OF THE SETTINGS
EXTENDED MODE
CURSOR DISAPPEARED
VIDEO PLAYBACK IN EXTENDED MODE
MIRROR MODE
BE THE PRIMARY MONITOR
WINDOWS SHORTCUT
AUDIO CONFIGURATION
"
1
1
1
2
3
3
4
5
5
8
10
19
20
25
25
26
26
27
27
29
UNINSTALL THE DRIVER
SPECIFICATION
REGULATORY COMPLIANCE
FCC CONDITIONS
CE
WEEE INFORMATION
30
32
34
34
34
34
Before attempting to connect, operate or adjust this product,
please save and read the User's Manual completely. The style
of the product shown in this User's Manual may be different
from the actual unit due to various models.
Safety Instructions
Always read the safety instructions carefully:
■ Keep this User’s Manual for future reference
■ Keep this equipment away from humidity
■ If any of the following situation arises, get the equipment
checked by a service technician:
• The equipment has been exposed to moisture.
• The equipment has been dropped and damaged.
• The equipment has obvious sign of breakage.
• The equipment has not been working well or cannot get it
to work according to the User’s Manual.
Copyright
This document contains proprietary information protected by
copyright. All right are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in
any form, without prior written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the property of
their respective owners or companies.
Page 1 of 5
Introduction
The USB 3.0 Dual Display Docking Station is designed
for extra connectivity demands. With the docking station,
you can extend the connection of a computer to more USB
peripherals, Ethernet network, the speaker and the
microphone through one single USB cable.
"
With the built-in USB 3.0 ports, the docking station enables
you to enjoy the super speed data transmission between
USB peripherals. Aside from USB 3.0, this product is
compliant with USB 1.1/2.0 specification. You will be able to
keep and use your USB 1.1/2.0 devices as usual.
In addition, the docking station is equipped with video
output.
"
With the DVI and HDMI ports (HDMI only available
for Dual Display Model), you can mirror your primary screen,
or extend the Window desktop allowing visibility of more
applications at the same time. Enhanced expansion
capability plus the stylish appearance, this docking station
with video is the most versatile accessory that also
complements your home or office space.
"
Incorporates HDMI® technology.
Page 2 of 5
Features
■ Compatible with USB 3.0/2.0 specification
■ Resolution up to 2048x1152
■ Support audio 2.1 channel
■ Support Gigabit Ethernet
■ Support HDMI (Dual Display Model only)
■ Support BC1.2 charging (Front x1)
Package Contents
■ Docking Station x1
■ USB 3.0 Cable x1
■ Power Adapter x1
■ CD (Driver and User’s Manual) x1
Page 3 of 5
System Requirements
The minimum requirements for the PC are:
■ CPU: 1.6GHz single core or higher processor clock.
- Intel Pentium/Celeron family
- AMD K6/Athlon/Duron family, or compatible
processor
■ RAM: 1GB or above
■ USB port: 2.0/3.0
■ 30MB of available disk space
■ Operating Systems:
- Microsoft: Windows®7/ Windows®8/ Windows®8.1
- Apple: Mac® OS 10.9
To play DVD on the extra connected monitor through
docking station, in addition to the requirements above,
the following requirements should also be met:
■ With dual core CPU at 2.0 GHz processor clock
Page 4 of 5
Product Overview
Front
"
Item
Description
1 USB 3.0 Port
Connect to USB 3.0 devices
2 USB 3.0 Port
Connect to USB 3.0 devices With
BC 1.2 charging
3 Speaker Jack
Connect to a speaker or earphone
4 MIC Jack
Connect to a microphone
Page 5 of 5
Rear
Item
Description
5
USB 2.0 port
Connect to USB 2.0
devices
6
RJ45 port
Connect to an Ethernet
7
DVI connector
Connect to a DVI monitor
or projector
8
HDMI connector Connect to a HDMI
monitor or projector
9
USB 3.0 port
(TypeB)
Connect to a computer
Power jack
Connect to the power
adapter
10
Page 8 of 33
Connection
To connect the USB peripherals, Ethernet, speaker and
microphone, follow the illustrations below to connect the
corresponding connectors.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
Page 9 of 33
Installation
"
Caution: DO NOT connect the docking to a
computer before installing the provided driver.
"
"
Note that the following strings and screen shots shown
on this user's manual may vary slightly from each
operation.
Windows®7/ Windows®8/ Windows®8.1
1. Insert the supplied driver CD into a computer’s
CD/DVD- ROM.
2. Click Run Setup.exe to start the installation.
"
Page 10 of 33
NOTE:
If the AutoPlay does not appear automatically,
locate and double-click on the Setup.exe file in the
driver folder to launch the setup.
Enter the administrator password and then click Yes
to start the installation if a User Account Control
dialog box appears.
3. Click I Accept for the next step.
Page 11 of 33
"
4. Be patient with the installation procedure.
"
5. Connect the Docking Station to a computer after the
driver installation is completed. For connection
details, refer to the chapter of Connection.
6. When the operating system detects the adapter, the
reminder message will appear on the system tray.
Page 12 of 33
"
"
"
"
"
"
"
"
"
"
Mac® OS
1. Insert the supplied driver CD into a computer's
CD/DVD ROM.
2. Click Run Driver.dmg to start the installation, and
click Continue.
"
Page 13 of 33
3. Click Continue in Software License Agreement.
"
"
4. Click Agree > Install > Continue Installation.
Page 14 of 33
"
5. Please wait while the installation is in process.
6. Installation was successful
Page 15 of 33
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
Verifying the installation
To verify the driver of the adapter, follow the step below.
1. Following the path to open the device manager.
Windows®7:
Control Panel\ System and Security\ Systems\
Device manager
Windows®8/ Windows®8.1:
Settings\ Control Panel\ System and Security\
System\ Device manager
2. You will find DisplayLink Adapter device listed as
below.
"
"
Page 16 of 33
*Actual strings depend on your operating system. The screen
shots are from Windows®7 (Dual Docking Station are from
Windows®8) and might vary slightly for each operating system.
NOTE:
If you cannot find the driver in the list, the driver may
not be properly installed. Please delete the item,
unplug the adapter and repeat the installation steps.
Mac®OS
1. Click on the Apple sign on the top left corner of the
screen to open About This Mac on Mac®.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
2. When the screen below appears, click More Info….
"
"
"
Page 17 of 33
3. When the screen below appears, please click
System Report….
"
"
"
"
"
"
"
"
"
"
"
"
"
4. You will find DisplayLink Adapter device listed as
below.
"
Page 18 of 33
Display configuration
NOTE: The following screenshots in this section are
using Windows
®
7 operating system. It may not match
your operating system but the definitions of buttons, tabs
and menus are the same.
Utility settings
The supplied utility allows configuring the display mode,
screen rotation, screen resolution, and physical
arrangement of your monitors.
1. Click utility icon in Windows System Tray.
NOTE: If you cannot find the icon in Windows System
Tray, click arrow icon to bring up icon list to find it.
2. Select a preferred option, and then click it using
mouse.
"
Page 19 of 33
Description of the settings
"
Options
Description
DisplayLink
Manager
Enable the Windows screen
resolution page.
Check for Updates
Check the latest driver and
download if available
USB 3.0 Dual Display Docking Station
Screen
Resolution
Click to select an available
resolution. Note that this function
is invalid in mirror mode, as the
resolution is defined as the
resolution of the primary monitor.
Screen Rotation
Rotate the screen according to the
desired orientation
Extend
Extend the screen according to the
desired orientation
Extend to
The cursor can extend to desired
screen vie left/right/above/below
way moving
Set as Main monitor
Set this screen to the main screen
Mirror
Duplicate the primary monitor to
the monitor which connects with
the adapter
Notebook Monitor Off
Switch the add-on monitor to the
main display and turn off the
screen of the laptop.
Note: This function works only
when one add-on monitor is
connected. This option will also
only appear on laptop
Page 20 of 33
Options
Description
Mirror
Duplicate the primary monitor to
the monitor which connects with
the adapter
Off
Turn off the monitor
Optimise for video
Optimise the video quality when
playing back. Text may appear less
clear when enabling
Fit to TV
Adjust the size of Windows
Desktop on the TV
Note: This function works only
when one add-on monitor is
connected. Besides, this option will
also only work in extended mode.
The add-on monitor will change to
the extended mode if selecting this
option while in mirror mode.
Audio Setup
Enable the Windows audio
configuration page. This function
works only in specific models
Video Setup
Enable the Windows screen
resolution page.
Page 21 of 33
Multi-monitor configuration
An extra DVI monitor can be connected through the
Docking Station (HDMI and DVI monitors for Dual Head
Station) if one monitor is already connected to the PC
directly. Once the extra monitor is connected, it can be
configured to use either “mirror mode”, “extended
mode” or be the primary display.
Windows® 7/ Windows® 8/ Windows® 8.1
Position the mouse anywhere on the Windows Desktop,
Right-click and select Screen Resolution.
"
Alternatively, click utility icon in the Windows
System Tray, and then select DisplayLink Manager or
Video Setup.
Page 22 of 33
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
Mac® OS
1. Click Apple icon of the upper left icon in screen and
select System Preferences… on the drop-down list.
"
Page 23 of 33
2. Click Displays turn to multi-monitor mode and the
extended monitor with model number will be shown
in the Desktop.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
NOTE: Switch to Tick the box in front of Mirror
Displays turns to Mirror Mode.
Page 24 of 33
Extended mode
1. Refer to the Windows system configuration
section to open the configuration page.
2. In the Display drop-down menu, select the preferred
monitor.
3. Check the Multiple Displays > Extend these
displays on Window® 7/ Window® 8/ Window® 8.1
4. Click OK to confirm and close the settings screen.
5. Once the setting is completed, simply drag and drop
the application icons or the opened windows to the
add-on monitor. However, some applications may not
support to display on the extended desktop.
Cursor disappeared
If the status remains in the extended mode but the
adapter is disconnected, the desktop will still be panned
to the add-on monitor. The cursor may not be found on
the primary monitor in such a case. If it happens,
connect the add-on monitor through the adapter again or
keep moving the mouse.
Page 25 of 33
Video playback in extended mode
If the video or DVD playback quality is poor or low
performance in extended mode, please playback it on
the primary monitor instead of the add-on monitor.
Mirror mode
1. Refer to the Windows system configuration
section to open the configuration page.
2. In the Display drop-down menu, select the preferred
monitor.
3. Check the Multiple Displays > Duplicate these
displays on Window®7/ Window®8/ Window®8.1
4. Click OK to confirm and close the settings screen.
Page 26 of 33
Be the primary monitor
1. Refer to the Windows system configuration
section to open the configuration page.
2. In the Display drop-down menu, select the preferred
monitor.
3. Check the Make this my main display box on
Window® 7, Set as Main Monitor on Window®8/Window®8.1
NOTE: Some PCs and laptops may need to disable the
main display (i.e. uncheck the Extend the desktop onto
this monitor or Extend my Windows desktop onto
this monitor box for the main display) as part of the
same settings change.
4. Click OK to confirm and close the settings screen.
Windows shortcut
Press (Windows button) + P to bring up the menu as
below, and then select a desired option.
This function is available for Windows®7 only.
"
Page 27 of 33
Supported resolution
Before adjusting the resolution, refer to the table below
for the supported resolution.
"
Name
Refresh rates
Refresh rates
available at 16 available at 32
bit color quality bit color quality
640x480
VGA
60 72 75 85
60 72 75 85
800x600
SVGA
56 60 72 75 85
56 60 72 75 85
1024x768
XGA
60 72 75 85
60 72 75 85
1280x720
720p
60
60
1280x768
WXGA+
60 75 85
60 75 85
1280x800
WXGA
60
60
1280x1024
SXGA
60 75 85
60 75 85
1366x768
WXGA+
60
60
1400x1050
SXGA+
60 75 85
60 75 85
1600x1200
UXGA
60
60
1680x1050
WSXGA+
60
60
1920x1080
1080p
60
60
1920x1200
WUXGA
60
60
2048x1152
QXGA
60
60
"
* Note that interlaced modes and reduced blanking modes are
not supported.
Page 28 of 33
Audio configuration
By default, when the docking station is connected to a
computer, the audio configuration may be changed to
USB (Multimedia) Audio Device automatically (this
setting depends on models). If it does not work, follow
the steps below to setup.
Widnows®7/ Widnows®8/ Widnows®8.1
1. Open Control Panel and then select the hardware
and sound icon.
2. Click Sound > Manage audio devices and then
select USB Audio Device or Displaylink Audio.
Page 29 of 33
"
"
Uninstall the driver"
1. Follow the instructions to find the driver path, and"
then right-click on DisplayLink Graphics to uninstall"
the driver."
Widnows®7"
Control Panel > Programs > Programs and Features"
> Uninstall or change the program"
Widnows®8/ Widnows®8.1"
Settings > Control Panel > Programs > Uninstall a"
program"
2. Click Yes to confirm the uninstallation.
"
"
"
"
"
"
"
"
Page 30 of 33
3. Click Yes to restart your computer. You can also
disconnect the video connection now.
"
"
"
"
"
"
"
"
"
Mac® OS
1. Open driver and click DisplayLink Software
Uninstaller.
Page 31 of 33
"
Specification
"
Host Interface
USB 3.o
Connector
Video Output
HDMI 30 pin Female Connector
(Dual Display Model)"
DVI HDDE 30 pin Female
Connector
Host upstream link
USB B Type Female Connector
HUB downstream link
USB A Type Female Connector
Audio Port
3.5mm stereo mini-jack 2.1ch
Ethernet Port
RJ45 Connector
Power
DC power jack
HDMI (Dual Display Model)
2048x1152
DVI
2048x1152
Video Resolution
Supported colours
16 bits and 32 bits
Audio
2.1ch
Ethernet
10/100/1000
Power
Power mode
Self-powered
Power Adapter
Input: AC 100-240V"
Output: DC 5V/4A
Power consumption
Operation Power: 14.43W"
Suspend Mode Power: 1.95W
Housing
ABS (Plastic)
Weight
365 grams approx
Operation temperature
0C -40C
Storage temperature
-20C - 70C
Physical Properties
Working environment
Compliance
CE. FCC
"
*Specifications are subject to change without prior notice.
Page 32 of 33
Regulatory Compliance
FCC Conditions
This equipment has been tested and found to comply with Part
15 Class B of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference
received and include interference that may cause undesired
operation.
CE
This equipment is in compliance with the requirements of the
following regulations: EN 55 022: CLASS B
WEEE Information
For EU (European Union) member users: According to the
WEEE (Waste electrical and electronic equipment) Directive, do
not dispose of this product as household waste or commercial
waste. Waste electrical and electronic equipment should be
appropriately collected and recycled as required by practices
established for your country. For information on recycling of this
product, please contact your local authorities, your household
waste disposal service or the shop where you purchased the
product.
Page 33 of 33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement