ViewSonic | G90FB-2 | User guide | ViewSonic G90FB-2 User guide

ViewSonic
®
G90f/G90fB
CRT Monitor
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Podręcznik użytkownika
- Руководство пользователя
- 使用手冊
- 使用手冊
- Panduan Pengguna
- Türkçe
ViewSonic
®
Model No. : VS10794
Contents
TCO Informational .......................................................................................... i
Compliance Information ................................................................................. 1
Important Safety Instructions .......................................................................... 2
Copyright Information ...................................................................................... 3
Product Registration ........................................................................................ 3
Getting Started
Package Contents ........................................................................................... 4
Precautions ..................................................................................................... 4
Quick Installation ............................................................................................. 5
Using the Monitor
Setting the Timing Mode ................................................................................. 6
Adjusting the Screen Image ............................................................................ 7
OSD Lock Settings .......................................................................................... 8
Main Menu Controls ........................................................................................ 9
Other Information
Specifications .................................................................................................. 11
Troubleshooting .............................................................................................. 12
Customer Support ........................................................................................... 13
Cleaning the Monitor ....................................................................................... 14
Limited Warranty ............................................................................................. 15
ViewSonic
G90f/G90fB
TCO Information
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured and
tested according to some of the strictest quality and environmental
requirements in the world. This makes for a high performance product,
designed with the user in focus that also minimizes the impact on our
natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
•
Good visual ergonomics and image quality in order to improve the working environment
for the user and to reduce sight and strain problems. Important parameters are luminance,
contrast, resolution, reflectance, color rendition and image stability.
Energy
•
Energy-saving mode after a certain time – beneficial both for the user and the
environment
•
Electrical safety
Emissions
•
Electromagnetic fields
•
Noise emissions
Ecology
•
The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 000
•
Restrictions on
o chlorinated and brominates flame retardants and polymers
o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in
cooperation with scientists, experts, users as well as manufacturers all over the world. Since
the end of the 1980s TCO has been involved in influencing the development of IT equipment
in a more user-friendly direction. Our labeling system started with displays in 1992 and is now
requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
* This declaration is for TCO’03 compliance model.
ViewSonic
G90f/G90fB
i
Compliance Information
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the
cables which are included with the equipment or specified. Also, any unauthorized changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this device.
For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numéique de la Classe B repecte toutes les exigences du Réglement sur le
matériel brouilleur du Canada.
CE Conformity for European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard
to “Safety.”
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.
ViewSonic
G90f/G90fB
1
Important Safety Instructions
1.
Read these instructions completely before using the equipment.
2.
Keep these instructions in a safe place.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this equipment near water. Warning: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
6.
Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in
this guide for further instructions.
7.
Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
9.
Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician for
replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.
ViewSonic
G90f/G90fB
2
Copyright Information
Copyright © ViewSonic® Corporation, 2006. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.
ViewSonic®, the three birds’ logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and
DDC are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency
(EPA).
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The
ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration
form, which you may mail or fax to ViewSonic®.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
G90f/G90fB
ViewSonic 19” CRT Monitor
VS10794
G90f/G90fB-4_UG_ENG Rev. 1B 01-02-06
___________________________________
___________________________________
Product disposal at end of product life
ViewSonic® is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. For TCO’03 recycling information, please refer
to our website:
1. USA: www.viewsonic.com/pdf/recyclePlus.pdf
2. Europe: www.viewsoniceurope.com
3. Taiwan: recycle.epa.gov.tw.
ViewSonic
G90f/G90fB
3
Getting Started
Congratulations on your purchase of a ViewSonic® color monitor.
Important! Save the original box and all packing material for future shipping needs.
Note : The word “Windows” in this user guide refers to the following Microsoft operating
systems: Windows 95, Windows NT, Windows 98, Windows 2000, Windows ME
(Millennium), and Windows XP.
Package Contents
Your package includes:
•
Color monitor
•
DB-15 video cable
•
Power cord
•
ViewSonic® CD-ROM Wizard
•
Quick Start Guide
Note: The CD includes the User Guide PDF files and INF/ICM display optimization files.
The INF file ensures compatibility with Windows operating systems, and the ICM file (Image
Color Matching) ensures accurate on-screen colors. ViewSonic® recommends that you install
both files.
Precautions
•
For best viewing conditions sit at least
18” from the monitor.
•
Avoid touching the screen with your
fingers. Oils from the skin are difficult
to remove.
•
Never remove the rear cover. The
monitor contains high voltage parts. You
may suffer serious injury if you touch
these parts.
•
Avoid exposing the monitor to direct
sunlight or another heat source,
including an open flame. The monitor
should be facing away from direct
sunlight to reduce glare.
•
Always handle your monitor with care
when moving it.
ViewSonic
G90f/G90fB
•
Place your monitor in a well ventilated
area. Do not place anything on the
monitor that prevents adequate
dissipation of heat.
•
Ensure the area around the monitor is
clean and free of moisture.
•
Keep the monitor away from magnets,
motors, transformers, speakers, and
televisions.
•
Do not place heavy objects on the
monitor, video cable, or power cord.
•
If smoke, on abnormal noise, or a
strange odor is present, immediately
switch the monitor off and call your
dealer or ViewSonic®. It is dangerous to
continue using the monitor.
4
Quick Installation
1.
Connect power cord
CD-ROM drive, see “Customer Support”
on page 13.
Connect the power cord to a properly
grounded AC outlet.
2.
Wait for the CD-ROM to auto-start.
Note: If the CD-ROM does not autostart:
Connect video cable
• Make sure both the monitor and
computer are turned OFF.
double-click on the CD-ROM icon in
Windows Explorer, then double-click
on viewsonic.exe.
• Con ne ct t he v ideo cable t o t he
computer.
Macintosh® users: Models older than
G3 require a Macintosh adapter. Attach
the adapter to the computer and plug
the video cable into the adapter.
To order a ViewSonic ® Macintosh
adapter, contact ViewSonic.
See “Customer Support” on page 13.
3.
Turn ON monitor and computer
Turn ON the monitor, then turn ON
the computer. This sequence (monitor
before computer) is very important.
4.
Follow the on-screen instructions.
5.
Windows users: Set the Timing Mode
(resolution and refresh rate)
Example: 1024 x 768 @ 85Hz.
For instructions on changing the
resolution and refresh rate, see the
graphic card’s user guide.
Installation is complete. Enjoy your
new ViewSonic® color monitor.
Note: At this point Windows users may
receive a message asking them to install
the INF file.
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in
“For Your Records” on page 3. (See
back of monitor.)
Install Display Optimization files
(INF and ICM files)
To register your product go online to
www.viewsonic.com.
Insert the ViewSonic ® Wizard CDROM into your computer’s CD-ROM
drive.
The ViewSonic® Wizard CD-ROM also
provides an opportunity for you to print
the registration form which you may
mail or fax to ViewSonic®.
Note: If your computer does not have a
Power cord
Video cable
AC wall outlet
ViewSonic
G90f/G90fB
5
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and
minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and
refresh rate (or vertical frequency; example 85 Hz). After setting the timing mode, use the
OSD (On Screen Display) controls to adjust the screen image.
For the best picture quality set your monitor timing mode to:
VESA 1280 x 1024 @ 85 Hz.
To set the Timing Mode:
1.
Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the
resolution.
2.
Set the refresh rate: See your graphic card’s user guide for instructions.
Note: The refresh rate should already be set if you have done the CD installation (or refer to
your graphics card documentation).
ViewSonic
G90f/G90fB
6
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OSD controls. The OSD
controls are explained at the top of the next page and are defined in “Main Menu Controls” on
page 9.
Main Menu
With OSD controls
CJONTRAST / BRIGHTNESS
ZOOM
H.POSITION / SIZE
V.POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
EXIT
1
2
Front Control Panel
shown below in detail
Memory Recall returns adjustments to the original factory settings if
the display is operating in a factory preset timing mode listed in this user
guide.
Scrolls through menu options and adjusts the displayed
control.
Displays the Main Menu or exits the control screen
and saves adjustments.
• Displays the control screen for the
highlighted control.
• Also toggles between two controls on
some screens.
Power LED
Green = ON
Orange = Power Saving
Power
On/Off
ViewSonic
G90f/G90fB
7
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
•
OSD Lock: Press and hold the [1] button on the face of the monitor for 10 seconds. The
message “OSD LOCK” will then display briefly, indicating that the OSD image settings
are now locked.
•
OSD Unlock: Press and hold the [1] button again for 10 seconds. The message “OSD
UNLOCK” will then display briefly, indicating that the OSD image settings are now
unlocked.
Do the following to adjust the display settings:
1. To display the Main Menu, press button [1].
M A I N M E N U (1)
CONTRAST / BRIGHTNESS
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
EXIT :
2.
SELECT :
1
2
To select a setting to be adjusted, press the arrow buttons on the front control panel of
your monitor and scroll through the choices. When the desired control is highlighted,
press button [2].
Note: Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
Display control screen (sample shown in step 3 below). Press button [2] to toggle to the
next control in the pair.
3.
To adjust the setting, such as CONTRAST in the sample below, press the arrow buttons.
CONTRAST
EXIT : 1
4.
BRIGHTNESS : 2
To save the adjustment and exit the menu press button [1] twice.
ViewSonic
G90f/G90fB
8
Main Menu Controls
Adjust the menu items shown below by using the up and down buttons.
Control
Explanation
__________________________________________________________________________________
Contrast adjusts the difference between the image background
(black level) and the foreground (white level).
Brightness adjusts the background black level of the screen
image.
Zoom expands and contracts the entire screen image.
Horizontal Position moves the screen image left or right.
Horizontal Size adjusts the width of the screen image.
Vertical Position moves the screen image up or down.
Vertical Size adjusts the height of the screen image.
Pincushion curves the vertical sides of the screen image.
Pin Balance curves the vertical edges of the screen image to the
left or right.
Trapezoid adjusts the top and bottom of the screen image until
they have equal length.
Parallel slants the vertical edges of the screen image until they are
vertical.
OSD Position allows you to move the on-screen display menus
and control screens.
Tilt rotates the entire screen image.
Moire Moire reduces interference patterns that appear as ripples,
waves, or unwanted background color textures. Interference patterns
of this type are most noticeable when viewing images having
closely spaced lines or finely detailed patterns
ViewSonic
G90f/G90fB
9
Control
Explanation
__________________________________________________________________________________
Degauss removes the build-up of magnetic fields that can cause
irregular colors to appear around the edges of screen images. There
are two ways to degauss the display:
automatically by turning the monitor on, or manually by selecting
the Degauss control from the menu. With Degauss selected from the
menu, press button [2] to degauss the monitor manually.
Important: Do not degauss repeatedly. Doing so can be harmful
to the display. Wait at least 20 minutes before selecting this control
again.
ViewMatch® Color provides several color options: several preset
color temperatures and User Color which allows you to adjust red
(R), green (G), and blue (B). The factory setting for this product is
9300K (9300° Kelvin).
9300K — Adds blue to the screen image for cooler white (used in
most office settings with fluorescent lighting).
6500K — Adds red to the screen image for warmer white and
richer red.
5000K — Adds blue and green to the screen image for a darker
color.
User Color— Individual adjustments for red, green, and blue.
Language allows you to choose language in the menus and control
screens.
Memory Recall returns adjustments to the original factory settings
if the display is operating in a factory preset timing mode listed in
this user guide.
Exception: This control does not affect changes made with the
User Color control.
ViewMeter displays the frequencies (horizontal and vertical)
coming from the graphics card of the computer.
ViewSonic
G90f/G90fB
10
Other Information
Specifications
CRT
Type
Dot Pitch
Phosphor
Glass surface
O
19” (18” viewable diagonal area). 90 deflection
0.20 mm horizontal, 0.13 mm vertical, and 0.25 mm diagonal dot
pitch
RGB, P 22 medium short persistence
TM~53.6%, anti-glare, anti-reflection and anti-static
Input Signal
Video
Sync
RGB Analog (0.7/1.0 Vp-p, 75 Ohms)
fH:30-97 kHz, fv:50-160 Hz
Separate Sync.,
Compatibility
PC
Macintosh1
VGA up to 1920 x 1440
Power Macintosh compatible from 640 x 480 to 1280 x 1024
(may require Macintosh cable adapter)
Resolution
Recommended and
supported
640 x 400 @ 70 Hz
640 x 480 @ 60, 85 Hz
800 x 600 @ 75, 85 Hz
1024 x 768 @ 75, 85 Hz
1280 x 1024 @ 75, 85 Hz
1600 x 1200 @ 75 Hz
1024 x 768 @ 75 Hz (Mac)
1152 x 870 @ 75 Hz (Mac)
Power
Voltage
AC 100-240 VAC
50/60 Hz
Display Area
Default
Full scan
352 mm(H) x 264 mm(V)
360 mm(H) x 270 mm(V)
Operating
Conditions
Temperature
Humidity
Altitude
32 F to 104 F (0 C to 40 C)
5% to 95% (non-condensing)
To 10,000 feet, 3000 m
Storage
Conditions
Temperature
Humidity
Altitude
-40 F to 140 F (-40 C to 60 C)
5% to 95% (non-condensing)
To 40,000 feet, 12000 m
Dimensions
Physical
(monitor)
445 mm (W) x 424 mm (H) x 465 mm (D)
17.6” (W) x 16.7” (H) x 18.3” (D)
Weight
Net
18.0 kg / 38.68 lb (monitor only)
Regulations
.
O
O
O
O
O
O
O
BSMI, PSB
CE, GS, ERGO, MPR II ,TCO’03,
GOST-R & Hygienic, SASO,
UL/cUL, FCC-B, ICES-B, DHHS, NOM, TUV-S
Power Consumption
Modes
1
O
On
Sleep
Off
< 55 W (Typical for G mode)
< 4 W (Orange LED)
<2W
Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic® Macintosh adapter, contact
Customer Support. You will need to provide the product serial number.
Note: This product was designed for operation in the magnetic fields of the hemisphere where it was purchased.
ViewSonic
G90f/G90fB
11
Troubleshooting
No power
•
Make sure power button (or switch) is ON.
•
Make sure A/C power cord is securely connected to the back of the monitor and to a
power outlet.
•
Plug another electrical device (like a radio) into the power outlet to verify that the outlet
is supplying proper voltage.
Power is ON but no screen image
•
Make sure the video cable supplied with the monitor is tightly secured to the video
output port on the back of the computer. If the other end of the video cable is not attached
permanently to the monitor, tightly secure it to the monitor.
•
Adjust brightness and contrast.
•
Verify whether an adapter is required for proper signal continuity between graphics card
and monitor.
Flickering
•
Not enough power supplied. Connect the monitor to a different outlet. If using a surge
protector, reduce the number of devices plugged in.
•
Check the ViewMeter from the main menu to verify the refresh rate (vertical frequency)
is 75 Hz or higher. See “Specifications” on page 11.
•
Remove any devices from the area around the monitor that emit magnetic fields such as
radios, surge protectors, unshielded speakers, fluorescent lights, AC power converters,
desk fans, etc.
•
Make sure the graphics card in your computer can use non-interlaced mode at the desired
frequencies. To enable your graphics card to support higher refresh rates, try selecting
fewer colors or running lower resolutions.
Wrong or abnormal colors
•
If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an improper
connection.
•
Connect the monitor to another computer.
•
Select Degauss from the Main Menu. Do this only once.
•
If you have an older graphics card, contact ViewSonic® Customer Support.
Entire screen image rolls vertically
•
Make sure video input signals are within the monitor’s specified frequency range.
•
Try the monitor with another power source, graphics card, or computer system.
•
Connect the video cable securely.
Control buttons do not work
•
Press only one button at a time.
ViewSonic
G90f/G90fB
12
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
Country/
Region
Web Site
T=Telephone
F=Fax
E-mail
United States
www.viewsonic.com/support/
T: 800 688 6688
F: 909 468 1202
service.us@viewsonic.com
Canada
www.viewsonic.com/support/
T= (866) 463 4775
F= (909) 468 1202
service.ca@viewsonic.com
United Kingdom
www.viewsoniceurope.com/uk
T= 0207 949 0307
F= +44 (0) 1293 643 910
service.eu@viewsoniceurope.com
Europe, Middle East,
Baltic countries, and
North Africa
www.viewsoniceurope.com
Contact your reseller
service.eu@viewsoniceurope.com
Australia and New
Zealand
www.viewsonic.com.au/support/
AUS= 1800 880 818
NZ= 0800 008 822
service@au.viewsonic.com
Singapore/
Malaysia/Thailand
www.viewsonic.com.sg/support/
T= +65 6273 4018
F= +65 6273 1566
service@sg.viewsonic.com
South Africa/
Other countries
www.viewsonic.com
T= +886 (2) 2246 3456
F= +886 (2) 8242 3668
service@sd.viewsonic.com
Hong Kong
www.hk.viewsonic.com/support/
T= +852 310 22 900
F= +852 2268 6778
service@hk.viewsonic.com
Macau
www.hk.viewsonic.com/support/
T= +853 700 303
service@hk.viewsonic.com
ViewSonic
G90f/G90fB
13
Cleaning the Monitor
•
Make sure the monitor is turned off.
•
Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2.
If further cleaning is required not clean, apply a small amount of non-ammonia, nonalcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2.
If further cleaning is required, apply a small amount of a non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the
surface.
Disclaimer:
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the
monitor screen or case. Some chemical cleaners have been reported to damage the screen and/
or case of the monitor.
ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based
cleaners.
ViewSonic
G90f/G90fB
14
Limited Warranty
VIEWSONIC® CRT MONITORS
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship, under normal use, during
the warranty period. If a product proves to be defective in material or workmanship during the warranty period,
ViewSonic® will at its sole option repair or replace the product with a like product. Replacement product or parts
may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic® Monitor products are warranted for three (3) years for all parts excluding the display tube, and three (3) years for
labor from the date of the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
b.
c.
d.
e.
f.
g.
h.
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by ViewSonic®.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed
on the product for an extended period of time.
4. Removal, installation, transportation, insurance, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic® Customer Support at 800-888-8583. You
will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic® service center or
ViewSonic®.
4. For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied
warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states
do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so
the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic® products sold outside of the U.S.A. and Canada, contact ViewSonic® or
your local ViewSonic® dealer.
Warranty_VSMON Rev. 1c
4.3: ViewSonic CRT Monitor Warranty
ViewSonic
G90f/G90fB
1 of 1
Release Date: 03-31-05
15
ViewSonic
®
Download PDF