IP Link® Device Interface
Communication Sheet
eiki_1_3367_2.pke
Revision: 3/17/2009
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user’s manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Video Projector
Eiki
N/A
LC-SXG400
Version History:
Driver
Version
Date
IP Link
Compiler
GC2
Version
Notes
2
03/09/09
1.3.11.1
2.5.0
Beta. Modified Volume command.
1
1/28/2009
1.3.11.1
2.5.0
Initial beta version.
Driver Notes:
Page 1 of 4
IP Link® Device Interface
Communication Sheet
eiki_1_3367_2.pke
Revision: 3/17/2009
Control Commands & States:
Aspect Ratio
Wide
Normal
Full
True
Audio Mute
On
Auto Image
Execute
Freeze
On
Off
Input
Digital
Analog 1
SCART
HDCP
Video 1
YPbPr
Analog 2
S-Video
Video 2
Eco 1
Eco 2
Normal
Lamp Mode
Off
High
Power Control
On
Off
Video Mute
On
Off
Volume (Discrete)
0 - 63
Volume (Step)
Up
Down
Page 2 of 4
IP Link® Device Interface
Communication Sheet
eiki_1_3367_2.pke
Revision: 3/17/2009
Status Available:
Aspect Ratio
Wide
Normal
Full
True
Audio Mute
On
Off
Connection Status
Connected
Disconnected
Device Status
Normal
Power Fail
Status Unavailable
Temp Warning (Power On) Temp Warning and
Cooling Down
Temp Warning and
Recovered
Power Save (Cooling
Down)
Power Save
Lamp Failure
Freeze
On
Off
Input
Digital
Analog 1
SCART
HDCP
Video 1
YPbPr
Analog 2
S-Video
Video 2
Eco 2
Normal
Lamp Usage
Hours
Lamp Mode
Eco 1
High
Power Control
On
Off
Power Status
Cooling Down
On
Status Unavailable
Warming Up
Video Mute
On
Off
Volume (Discrete)
0 - 63
Page 3 of 4
Off
eiki_1_3367_2.pke
IP Link® Device Interface
Communication Sheet
Revision: 3/17/2009
Cable and Adapter Requirements:
DB9 to 8 pin DIN adapter cable
OR
See pin diagram below
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection by shorting projector’s RTS/CTS pin to
ground. If communication problem still exists, try grounding Pin 5 (RTS/CTS) of the 8 PIN together with Pin 4, 7,
& 8.
General Notes:
Page 4 of 4