Axis P3367-VE Installation guide

INSTALLATION GUIDE
AXIS P3346-VE Network Camera
AXIS P3367-VE Network Camera
AXIS P3384-VE Network Camera
Legal Considerations
Video and audio surveillance can be prohibited by laws that vary
from country to country. Check the laws in your local region
before using this product for surveillance purposes. This product
includes one (1) H.264 decoder license and one (1) AAC decoder
license. To purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and fitness for
a particular purpose. Axis Communications AB shall not be
liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance or
use of this material. This product is only to be used for its
intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of the
patents listed at www.axis.com/patent.htm and one or more
additional patents or pending patent applications in the US
and other countries.
This product contains licensed third-party software. See the
menu item “About” in the product’s user interface for more
information.
This product contains source code copyright Apple Computer,
Inc., under the terms of Apple Public Source License 2.0 (see
www.opensource.apple.com/apsl). The source code is
available from https://developer.apple.com/bonjour/
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no user-serviceable
components. Unauthorized equipment changes or
modifications will invalidate all applicable regulatory
certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are
registered trademarks or trademark applications of Axis AB in
various jurisdictions. All other company names and products are
trademarks or registered trademarks of their respective
companies. Apple, Boa, Apache, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime,
UNIX, Windows, Windows Vista and WWW are registered
trademarks of the respective holders. Java and all Java-based
trademarks and logos are trademarks or registered trademarks of
Oracle and/or its affiliates. UPnPTM is a certification mark of the
UPnPTM Implementers Corporation.
Regulatory Information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
• Electromagnetic Compatibility (EMC) Directive
2004/108/EC. See Electromagnetic Compatibility (EMC).
• Low Voltage (LVD) Directive 2006/95/EC. See Safety.
• Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and Recycling.
A copy of the original declaration of conformity may be obtained
from Axis Communications AB. See Contact Information.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
• Radio frequency emission when installed according to the
instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used in its
intended environment.
USA
Using an unshielded network cable (UTP) - AXIS P3367-VE
and AXIS P3384-VE have been tested using an unshielded
network cable (UTP) and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his own expense.
Using a shielded network cable (STP) – AXIS P3346-VE, AXIS
P3367-VE and AXIS P3384-VE have been tested using a
shielded network cable (STP) and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
To be used in a residential area or a demanding electrical
environment, the product shall be connected using a shielded
network cable (STP) that is properly grounded.
Canada
This digital apparatus complies with CAN ICES-3 (Class B). The
product shall be connected using a shielded network cable (STP)
that is properly grounded.
Cet appareil numérique est conforme à la norme CAN NMB-3
(classe B). Le produit doit être connecté à l'aide d'un câble
réseau blindé (STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF emission
according to the Class B limit of EN 55022. The product shall be
connected using a shielded network cable (STP) that is properly
grounded.
This product fulfills the requirements for immunity according to
EN 61000-6-1 residential, commercial and light-industrial
environments.
This product fulfills the requirements for immunity according to
EN 55024 office and commercial environments.
Australia/New Zealand
This digital equipment fulfills the requirements for RF
emission according to the Class B limit of AS/NZS CISPR 22.
The product shall be connected using a shielded network
cable (STP) that is properly grounded.
Japan - この装置は、クラスB 情報技術装置です。
この装置 は、家庭環境で使用することを目的として
います が、この装置がラジオやテレビジョン受信機
に近 接して使用されると、受信障害を引き起こすこ
と があります。取扱説明書に従って正しい取り扱い
をして下さい。本製品は、シールドネットワーク
ケーブル(STP)を使用して接続してください。また
適切に接地してください。
Korea - ࢇ̛̛Еɼࢽࡈ%̗ࢷ࢕ળࢶଢ̛̛Ի۰
࣯Իɼࢽ߾۰‫ࡈی‬ଜЕʨࡶּࢶࡳԻଜֲֻҘ
एࠇ߾۰‫ࡈی‬ଟܹ࢑‫ݡ‬ТЬࢶࢸ஢ࢻएѹ673
VKLHOGHGWZLVWHGSDLUৼࢇ‫ࡈیࡶٴ‬ଜࠆࢿ૽
ࡶࠉʼଜ‫ࠝݤݫ‬
Safety
This product complies with IEC/EN 60950-1, Safety of
Information Technology Equipment. If its connecting cables are
routed outdoors, the product shall be grounded either through a
shielded network cable (STP) or other appropriate method.
Disposal and Recycling
When this product has reached the end of its useful life, dispose
of it according to local raws and regulations. For information
about your nearest designated collection point, contact your
local authority responsible for waste disposal. In accordance
with local legislation, penalties may be applicable for incorrect
disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the
European Union member states. To prevent potential
harm to human health and the environment, the product must
be disposed of in an approved and environmentally safe
recycling process. For information about your nearest designated
collection point, contact your local authority responsible for
waste disposal. Businesses should contact the product supplier
for information about how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
Support
Should you require any technical assistance, please contact your
Axis reseller. If your questions cannot be answered immediately,
your reseller will forward your queries through the appropriate
channels to ensure a rapid response. If you are connected to the
Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database.
Search by product, category, or phrase
• report problems to Axis support staff by logging in to your
private support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Should you require any technical assistance, please contact
appropriate channels according to your AVHS license
agreement to ensure a rapid response.
Learn More!
Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.
AXIS P33-VE Series Installation Guide
Page 5
Safety Information
Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for
future reference.
Hazard Levels
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not
avoided, could result in minor or moderate
injury.
Indicates a situation which, if not avoided,
could result in damage to property.
Other Message Levels
Indicates significant information which is
essential for the product to function correctly.
Indicates useful information which helps in
getting the most out of the product.
Page 6
AXIS P33-VE Series Installation Guide
Safety Instructions
• The Axis product shall be installed by a trained professional.
•
•
•
•
•
•
•
•
•
The Axis product shall be used in compliance with local laws and regulations.
Store the Axis product in a dry and ventilated environment.
Avoid exposing the Axis product to shocks or heavy pressure.
Do not install the product on unstable brackets, surfaces or walls.
Use only applicable tools when installing the Axis product. Excessive force could cause damage to
the product.
Do not use chemicals, caustic agents, or aerosol cleaners. Use a clean cloth dampened with pure
water for cleaning.
Use only accessories that comply with technical specification of the product. These can be provided
by Axis or a third party.
Use only spare parts provided by or recommended by Axis.
Do not attempt to repair the product by yourself. Contact Axis support or your Axis reseller for
service matters.
Transportation
• Keep the protective packaging. When transporting the Axis product, the protective packaging shall
be replaced in its original position.
• When transporting the Axis product, use the original packaging or equivalent to prevent damage to
the product.
AXIS P33-VE Series Installation Guide
Page 7
Battery
The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal realtime clock (RTC). Under normal conditions this battery will last for a minimum of five years.
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When
the battery needs replacing, a log message will appear in the product’s server report. For more
information about the server report, see the product’s setup pages or contact Axis support.
The battery should not be replaced unless required, but if the battery does need replacing, contact
Axis support at www.axis.com/techsup for assistance.
• Risk of explosion if the battery is incorrectly replaced.
• Replace only with an identical battery or a battery which is recommended by Axis.
• Dispose of used batteries according to local regulations or the battery manufacturer's instructions.
Dome Cover
• Be careful not to scratch, damage or leave fingerprints on the dome cover because this could
decrease image quality. If possible, keep the protective plastic on the dome cover until the
installation is complete.
• Do not clean a dome cover that looks clean to the eye and never polish the surface. Excessive
cleaning could damage the surface.
• For general cleaning of the dome cover it is recommended to use a non-abrasive, solvent-free neutral
soap or detergent mixed with pure water and a soft, clean cloth. Rinse well with pure lukewarm
water. Dry with a soft, clean cloth to prevent water spotting.
• Never use harsh detergents, gasoline, benzene or acetone etc and avoid cleaning the dome cover in
direct sunlight or at elevated temperatures.
Page 8
AXIS P33-VE Series Installation Guide
Installation Guide
This guide helps you to install the AXIS P33-VE Series on your network. For further information,
please see the User Manual available on the CD, or from www.axis.com/techsup
Follow these instructions to install the network camera
1.
2.
3.
4.
5.
6.
Package Contents, on page 9
Hardware Overview, on page 10
Install the Hardware, on page 15
Access the Product, on page 20
Adjust the Lens, on page 20
Complete the Installation, on page 22
Important!
This product must be used in
compliance with local laws and
regulations.
• Before you begin, make sure that the package contents, power supply, and the required cables, tools,
and documentation are available. See Package Contents below.
• This network camera is intended to operate with PoE; if not available use Axis PoE Midspan 1 port
(not included)
AXIS P33-VE Series Installation Guide
Page 9
Package Contents
Item
Models/variants/notes
Network camera
with heating module
AXIS P3346-VE
AXIS P3367-VE
AXIS P3384-VE
Mounting bracket
Dome covers
Clear transparent cover
Smoked transparent cover
Weather shield
Labels
2 adhesive serial no. labels
Mounting kit
Resitorx screw driver, drill template, 5-meter network cable with gasket
4 screws and plugs, 2 long screws, 2 M4x8 screws
1 gasket, terminal block connector
CD
AXIS Network Video Product CD including product documentation,
installation tools and other software
Printed Materials
Installation Guide (this document)
Axis Warranty Document
AVHS Authentication key
Optional accessories
See www.axis.com for information on available accessories
Page 10
AXIS P33-VE Series Installation Guide
Hardware Overview
Camera unit
Heater
I/O connector
Network connector
(PoE)
Control button
LED indicators
Audio out
Audio in
Mounting bracket
Unit casing
Spring
SD memory card slot
Camera unit
Dome cover
Weather shield
Holes for cables
routed through the wall
Serial no.
Fan output
Side holes with
connector
gaskets for cables
routed along the wall
The heater in the camera unit may be hot.
Dimension (HxW)
AXIS P3346-VE = 117 x 179 mm (4.59” x 7.05”)
AXIS P3367-VE = 117 x 179 mm (4.59” x 7.05”)
AXIS P3384-VE = 117 x 179 mm (4.59” x 7.05”)
Weight
AXIS P3346-VE = 1.6 kg (3.5 lb)
AXIS P3367-VE = 1.6 kg (3.5 lb)
AXIS P3384-VE = 1.6 kg (3.5 lb)
AXIS P33-VE Series Installation Guide
Page 11
LED Indicators
LED
Color
Indication
Network
Green
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Status
Power
Amber
Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit
No network connection.
Green
Steady green for normal operation.
Amber
Steady during startup; flashes once during reset to factory default or while
restoring settings.
Red
Slow flash for failed upgrade.
Green
Normal operation.
Amber
Flashes green/amber during firmware upgrade.
Page 12
AXIS P33-VE Series Installation Guide
Connectors
Network Connector
AXIS P3367-VE and AXIS AXIS P3384-VE:
Due to local regulations or the environmental and electrical conditions in which the
product is to be used, a shielded network cable (STP) may be appropriate or required. All
cables connecting the product to the network and that are routed outdoors or in
demanding electrical environments shall be intended for their specific use. Make sure that
the network devices are installed in accordance with the manufacturer’s instructions. For
information about regulatory requirements, see Regulatory Information, on page 2.
AXIS P3346-VE:
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
network devices are installed in accordance with the manufacturer’s instructions. For
information about regulatory requirements, see Regulatory Information, on page 2.
•
RJ-45 Ethernet connector. Supports Power over Ethernet.
Audio Connectors
•
•
Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
Audio out - Audio output (line level) that can be connected to a public address (PA) system
or an active speaker with a built-in amplifier. A pair of headphones can also be attached. A
stereo connector must be used for the audio out.
SD Card Slot
•
SDHC memory card slot - The high capacity SD memory card can be used for local recording with removable storage.
AXIS P33-VE Series Installation Guide
Page 13
I/O Connectors
•
•
•
I/O terminal connector - Used in applications for e.g. motion detection, event triggering, time lapse recording and alarm notifications.
In addition to an auxiliary power and a GND pin, it provides the
Pin4
Pin2
interface to:
Pin3
Pin1
1 transistor output - For connecting external devices such as relays
and LEDs. Connected devices can be activated by the VAPIX® Application Programming
Interface (API), by the output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > Ports & Devices) if the alarm device
is activated.
1 digital input - An alarm input for connecting devices that can toggle between an open
and closed circuit, for example: PIRs, door/window contacts, and glass break detectors.
When a signal is received the state changes and the input becomes active (shown under
System Options > Ports & Devices).
Function
Pin
Notes
Specifications
GND
1
Ground
3.3V DC
Power
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Max. load = 50mA
Digital
Input
3
Connect to GND to activate, or leave floating (or
unconnected) to deactivate.
Min. input= - 40V DC
Max. input= + 40V DC
Digital
Output
4
Uses an open-drain NFET transistor with the source
connected to GND. If used with an external relay, a
diode must be connected in parallel with the load,
for protection against voltage transients.
Max. load = 100mA
Max voltage = + 40V DC
Page 14
AXIS P33-VE Series Installation Guide
The following connection diagram gives an example of how to connect an auxiliary device to the
AXIS P3346-VE/P3367-VE/P3384-VE.
1
E.g. push button
3.3V
max. 50mA
2
3
D
G
S
4
AXIS P33-VE Series Installation Guide
Page 15
Install the Hardware
Please remove the rubber band for transport-safety from the camera unit before you mount
the camera.
Prepare the Network Cable
For network cable specifications, see Network Connector, on page 12.
If a cable other than the provided cable is used, you need to prepare a network cable with a gasket.
Gently force the cable through the gasket provided and attach a network connector. It may be
necessary to pierce a hole in the gasket with the resitorx screwdriver.
• Do not force the network connector into the gasket.
• Do not pierce the gasket with a knife or other sharp object.
Page 16
AXIS P33-VE Series Installation Guide
Prepare the Unit Casing (routing cables along the wall)
If the cables are to be routed along the wall, prepare the unit casing as follows:
1. Detach the side lid that is attached to the unit casing by removing the screw.
2. Loosen the two screws on the cable shield and detach the bottom part.
3. Attach the bottom part of the cable shield to the unit casing with the screw.
Unit casing
Screw
Side lid
Cable shield
Unit casing
Top part
Bottom part
Replace Clear/Smoked Dome Cover (optional)
The AXIS P3346-VE/P3367-VE/P3384-VE is supplied with an optional dome.
To replace the dome cover:
1. Loosen the 4 screws under the dome cover that hold the dome in place.
2. Replace the old dome with the new and tighten the screws.
Mounting Bracket
The mounting plate has 4 mounting hole patterns (A,B,C,D).
The mounting hole patterns follow standard for the following
mounting options:
•
A: 4" square box
• B: standard-sized US double gang junction box
• C: 4" octagon box
• D: standard-sized US single gang junction box
AXIS P33-VE Series Installation Guide
Page 17
Route the Cables
Depending on whether you want to route the cables through or along the wall, follow the relevant
instructions below.
Routing Cables along the Wall
1. Using the drill template drill 4 holes in the wall.
2. Attach the mounting bracket to the wall using the 4 screws provided, or screws appropriate for
the wall material.
3. Remove the camera unit from the unit casing by pushing the springs aside.
4. Remove the gaskets from the side holes in the unit casing. If there is only one cable, remove
only one gasket.
5. Place the unit casing on the mounting bracket and attach it by tightening the four screws.
6. Pull the cables up through the side holes in the unit casing.
7. Drag the gaskets along the cable and plug them into the holes. The gaskets should fit snugly in
the holes with no folds or bends.
8. Re-attach the top part of the cable shield by tightening the two screws.
To avoid moisture-related problems it is recommended that the cables are routed to the
camera from below with the cable holes facing downwards.
Routing Cables through the Wall
1. Using the drill template drill 4 holes in the wall.
2. Route the network cable (and the I/O, audio cable if necessary) through the wall and through
the holes in the mounting bracket.
3. Attach the mounting bracket to the wall using the 4 screws provided, or screws appropriate for
the wall material.
4. Remove the camera unit from the unit casing by pushing the springs aside.
5. Remove the gaskets from the back holes in the unit casing. If there is only one cable, remove
only one gasket.
6. Route the cables through these holes.
7. Drag the gaskets along the cables and plug them into the holes. The gaskets should fit snugly in
the holes with no folds or bends.
Page 18
AXIS P33-VE Series Installation Guide
8. Attach the unit casing to the
mounting bracket by tightening
the four screws.
Remove gaskets
from holes
Mounting bracket
Unit casing
Network cable with gasket
AXIS P33-VE Series Installation Guide
Page 19
Install the Camera Unit
Connector for fan
Camera unit
Attach
screw to camera
Network cable
1. Attach the network cable to the camera unit; and the cable for audio and I/O if required. It is
recommended that the network cable is twisted to a loop as shown in the illustration above.
Be careful not to stretch or bend the network cable too much since this could cause
damage to the network cable.
2.
3.
4.
5.
Insert the SD memory card (optional).
Pull aside the springs in the unit casing and click the camera unit in place.
Attach the fan connector to the connector in the camera unit.
Attach the two M4x8 20 screws to the camera for greater stability.
These screws are only necessary to secure against heavy shocks and vibrations.
Page 20
AXIS P33-VE Series Installation Guide
The AXIS P3346-VE/P3367-VE/P3384-VE
can also be fitted with a metal conduit for
protecting the cabling when cables are routed along
the wall.
Conduit
AXIS P33-VE Series Installation Guide
Page 21
Access the Product
Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/
Adjust the Lens
Adjusting the focus and zoom manually can damage the lens.
Do not tilt the lens more than 90°, this may cause damage to the product. See the
illustration below.
If it is necessary to tilt more than 90°, do the following:
1. Loosen the pan screw.
2. Rotate the lens 180°.
3. Tilt the lens.
Page 22
AXIS P33-VE Series Installation Guide
Open the Live View page in the web interface and make the following adjustments to the camera:
Horizontal line
Tilt adjustment screw
Tilt adjustment screw
Locking screw
1. Loosen the locking screw and tilt adjustment screws.
2. Turn the lens (with the lens holder) to the desired position. Make sure the horizontal lines on
either side of the lens are aligned horizontally
Ensure that the mark on the lens cover, between the horizontal lines, is facing up.
3. Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure the
camera’s position.
4. Open the Focus Adjustment page in the Web interface under Setup > Basic Setup > Focus &
Zoom, and follow the on-screen instructions. Use the image window to adjust the focus and
zoom. See the online help files for more information.
Due to the dome’s refraction, the image may appear slightly out of focus once the dome
has been placed. To correct this go to the Focus Adjustment page in the Web interface
under Setup > Basic Setup > Focus & Zoom, and adjust the focus again.
AXIS P33-VE Series Installation Guide
Page 23
Complete the Installation
Black protective
1. Rotate the black protective shield inside the dome cover
shield
so it is aligned with the camera’s position.
2. If required, attach the weather shield to the camera before
you attach the dome cover. To do this remove the two
screws in the dome cover. Transfer the washers from these
screws to the two long screws provided. Attach the weather shield using the two long screws.
3. Attach the dome cover to the unit casing by tightening the 4 screws.
Page 24
AXIS P33-VE Series Installation Guide
Reset to Factory Default Settings
Reset to factory default should be used with caution. A reset to factory default will reset all
settings, including the IP address, to the factory default values.
The installation and management software tools are available on the CD supplied with the
product and from the support pages on www.axis.com/techsup
To reset all parameters and the IP address to Factory Default settings:
1. Disconnect the power from the product.
2. Press and hold the Control button and reconnect power.
3. Keep the Control button pressed for about 15-30 seconds until the Status LED indicator flashes
amber.
4. Release the Control button.
5. When the Status indicator displays green (which can take up to 1 minute) the process is
complete and the product has been reset to factory default settings.
Using the installation and management software tools, assign an IP address, set the password, and
access the video stream.
Further information
The user’s manual is available from the Axis web site at www.axis.com or from the Axis Network
Video Product CD supplied with this product.
Visit www.axis.com/techsup to check if there is updated firmware available for the AXIS P33-VE
Series. To see the currently installed firmware version, see Setup > About in the camera’s web
pages.
Installation Guide
AXIS P3346-VE/AXIS P3367-VE/AXIS P3384-VE
© Axis Communications AB, 2014
Ver. 4.2
Printed: October 2014
Part No. 50609