Mitsubishi | PEN-4 | CG-SRIII Series Catalog

Product Brochure
Extreme curve
cutting speed
CG Series
High Productivity
Accurate Contour Cutting
Remote Monitoring
Up to 2 times the curve cutting speed*
Ideal for creating seals
Event Notification Function
The production speed of complicated cutting tasks
has improved greatly.
“Continuous Crop Mark Detection” enables the
continuous contour cutting of nested data. The new
“Segment Correction Function”, which detects
intermediate crop marks,
enables accurate contour
cutting of long-length prints.
Furthermore, the original “Half
Cut Function” enables easy
Cutline
removal of the nested data.
Events, such as completion of
cutting and error occurrence,
are sent to a preset e-mail
address. Monitoring the state
of machine is unnecessary,
enabling unattended
operation.
* Compared with CG-SRII series
CG-SRII
Series
CG-SRIII
Series
Error
Occurrence
Affordably priced but technologically
advanced. Achieve the highest return on
your investment.
Wider Application Possibilities
Bundled with two exclusive software programs
With a best-in-class cutting pressure of 500g, the range of
materials for various applications is increased.
Clamp pressure can be switched in two levels in order to cover a wide
range of sheets including thick materials.
Fine Cut 8 is plug-in software for Illustrator CS6 and CorelDRAW,
which meet all high level cutting needs, such as the creation of
contour cut data from images, or division cutting with a tiling function.
Simple Cut enables the drawing and editing of figures and
characters, enabling the easy creation of cutting data.
The optional sheet basket enables stable long-length cutting.
User-friendly with various functions
Continuous Crop Mark Detection
Crop marks are automatically and continuously
detected. Printed graphics are accurately contour cut
due to the compensation for image distortion. The
detection of a maximum of 4 crop marks provides a
precision finish.
X axis
Y axis
Segment Compensation
Intermediate crop marks of the feed direction are detected,
enabling four-point corrections for each segment. This leads to
accurate, long-length cutting, even if the image is distorted.
User Upgrade of Firmware
Nested data which are continuously arranged in the directions of
X-axis and Y-axis are cut by automatically making corrections.
Half Cut Function
A tool for keeping the firmware up-to-date is provided.
The upgrade can be done quickly and easily by the user,
thus ensuring the firmware is in the latest condition.
Cutting printed graphics while leaving a few joints make it possible to cut figures, designs
from substrates with backing sheets, fold lines for POP, and many other applications.
Other Functions
Half Cut
Division Cut Function
Overcut Function
Larger LCD
Ethernet Connection
Normal Cut
Cutline
A
Cutter
Seal paper
Backing sheet
B
A
A=Die cut (all cutout) B=Half cut
B
Seal paper
Backing sheet
A
■ Specifications
Item
Acceptable sheet width
Effective cutting area
Maximum speed
Adjustable speed range
Mechanical resolution
Command resolution
Repeatability*1
Effective Repeatability*2
Maximum pressure
Cutter
Range of
down pressure
Pen
Acceptable sheet*2
Acceptable tool*3
Type of command
Interface
Receiver buffer size
Operational environment
Power requirement
Dimensions(W x D x H)
Weight
Stand
*Intermediate crop marks can be
made by FinCut.
Division cut of data larger than sheet width.
Minimize uncut portions by overlapping the starting and ending point.
3-inch LCD (liquid crystal display) ensures easy operation.
Network control via integration into office LAN.
■ Supplies & Options
CG-60SRIII
CG-100SRIII
CG-130SRIII
90∼1,250 mm
90∼1,550 mm
1,070 mm
1.370 mm
Cutting: 70 cm/s, Moving: 100 cm/s
1 - 10 cm/s (1 cm/s step adjustment), 1 - 70 cm/s(5 cm/s step adjustment)
90∼740 mm
606 mm
X direction: 2.5 µm、
Y direction: 5 µm
25 µm or 10µm(MGL-IIc)/ 100 µm, 50 µm(MGL-Ic1)
± 0.2 mm / 2 M
586 mm × 2 M
1,050 mm × 2M
1.350 mm × 2M
500g
10 - 20 (
g 2 g step), 20 - 100 (
g 5 g step), 100 - 500g(10g step)
10 - 20 (
g 2 g step), 20 - 100 (
g 5 g step), 100 - 150g(10 g step)
Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Cutter, Ball-point pen
MGL-IIC / MGL-Ic1
USB2.0、RS-232C、Ethernet
27 MB Standard (When sorting, 17 MB)
5 - 35 ℃, 35 - 75 %(Rh), Non-condensation
AC 100 V - 240 V, 145 VA or less
1,030 × 430 × 335 mm
(1,030 × 430 × 1,185 mm)
*4
24kg
Optional equipment
1,530 × 580 × 1,150 mm
1,830 × 580 × 1,150 mm
41kg
Standard equipment
46kg
Standard equipment
*1 Except for media expansion and contraction due to temperature.
*2 Operated with Mimaki specified media, cutter and cutting conditions. Thickness of rubber and its cutting speed are limited.
Guaranteed accuracy environment: Temperature 12-25℃, Humidity 45-65%
*3 Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*4 When equipped with the optional stand (OPT-0231)
Quantity
Item-No
Standard blade for vinyl
Blade for vinyl
Item
3
3
SPB-0030
SPB-0001
Blade for small character
Blade for reflective sheet
3
2
SPB-0003
SPB-0006
Blade for fluorescent sheet
Blaabe set(rubber sheet)
Cutter holder
Pen adaptor
Refill type pen adaptor
Refill lead for Mitsubishi ball-point pen
Stand for CG-60
Sheet basket 60
Sheet basket 100
Sheet basket 130
Roll shaft 100
Roll shaft 130
3
3
1
1
1
10
1
1
1
1
1
1
SPB-0007
SPB-0084
SPA-0090
SPA-0169
SPA-0183
SPC-0726
OPT-C0235
OPT-C0234
OPT-C0232
OPT-C0233
OPT-C0223
OPT-C0224
CG-60SRIII
CG-100RIII
Stand and sheet basket of CG-60SRIII are optional.
Sheet baskets of CG-100SRIII and CG-130SRIII are optional.
CG-130RIII
@MimakiEurope
DB40268-02
Download PDF