Biostar | NF61V Micro AM2 | User`s manual | Biostar NF61V Micro AM2 User`s manual

NF61V Micro AM2 / NF61S Micro AM2
Setup Manual
FCC Information and Copyright
This equipment has been tes ted and found to comply with the limits of a Class
B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. T his equipment generates , uses and can radiate radio frequency
energy and, if not ins talled and used in accordance with the instructions , may
cause harmful interference to radio communications . There is no guarantee
that interference will not occur in a particular ins tallation.
The vendor makes no representations or warranties with respec t to the
contents here and s pecially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make c hanges to the c ontents here without obligation to
notify any party beforehand.
D uplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and produc t names are trademarks of their respec tive companies .
Table of Contents
Chapter 1: Introduction ............................................. 1
1.1
1.2
1.3
1.4
1.5
Before You Start................................................................... 1
Package Checklist................................................................ 1
Motherboard Features.......................................................... 2
Rear Panel Connectors.......................................................... 3
Motherboard Layout ............................................................ 4
Chapter 2: Hardware Installation .............................. 5
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ................................ 5
FAN Headers........................................................................ 7
Installing System Memory...................................................... 8
Connectors and Slots ............................................................10
Chapter 3: Headers & Jumpers Setup ......................12
3.1
3.2
How to Setup Jumpers..........................................................12
Detail Settings.....................................................................12
Chapter 4: RAID Functions.......................................19
4.1
4.2
4.3
Operation System................................................................19
Raid Arrays.........................................................................19
How RAID Works.................................................................19
Chapter 5: Useful Help ..............................................21
5.1
5.2
5.3
5.4
Driver Installation Note .......................................................21
Award BIOS Beep Code........................................................22
Extra Information................................................................22
Troubleshooting...................................................................24
Chapter 6: WarpSpeeder™ .......................................25
6.1
6.2
6.3
6.4
Introduction........................................................................25
System Requirement............................................................25
Installation .........................................................................26
WarpSpeeder™....................................................................27
Appendencies: SPEC In Other Language ................34
German................................................................................................34
France..................................................................................................36
Italian..................................................................................................38
Spanish ................................................................................................40
Portuguese...........................................................................................42
Polish...................................................................................................44
Russian ................................................................................................46
Arabic..................................................................................................48
Japanese ..............................................................................................50
NF61V Micro A M2 / NF61S Micro A M2
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU ST ART
Thank you for choosing our product. Be fore you start installing the
mothe rboard, please make sure you follow the instructions be low:
„ Prepare a dry and stable work ing environment with
sufficie nt lighting.
„ Always disconne ct the compute r from powe r outle t
be fore ope ration.
„ Before you take the mothe rboard out from anti-static
bag, ground yourse lf prope rly by touching any safe ly
grounde d appliance, or use grounded wrist strap to
remove the static charge.
„ Avoid touching the compone nts on mothe rboard or the
rear side of the board unless ne cessary. Hold the board
on the edge , do not try to be nd or flex the board.
„
„
1.2
Do not leave any unfastene d small parts inside the
case afte r installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the compute r from dange rous a rea, such as hea t
source , humid air and wate r.
PACKAGE CHECKLIST
FDD Cable X 1
HDD Cable X 1
Use r’s Manual X 1
Fully Se tup Drive r C D X 1
Rear I/O Panel for ATX Case X 1
Se rial ATA Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF Cable X 1 (optional)
Se rial ATA Powe r Switch Cable X 1 (optional)
Printe r Port Cable X 1 (optional)
1
Motherboard Manual
1.3
MOT HERBOARD FEAT URES
NF61V MICRO AM2
NF61S MICRO AM2
Socket AM2
Socket AM2
AMD Sempron / Athlon 64 / Athlon 64 FX /
AMD Sempron / Athlon 64 / Athlon 64 FX /
Althlon 64 X2 processors
Althlon 64 X2 processors
Supports Hyper Transport and Cool=n=Quiet
Supports Hyper Transport and Cool=n=Quiet
FSB
Supports up to 1GHz Bandwidth
Supports up to 1GHz Bandwidth
Chipset
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
ITE 8716F
ITE 8716F
CPU
Super I/O
Main
Memory
Graphics
IDE
SATA II
LAN
Sound
Provides the most commonly used legacy Super Provides the most commonly used legacy Super
I/O functionality.
I/O functionality.
Low Pin Count Interface
Low Pin Count Interface
DIMM Slots x 2
DIMM Slots x 2
Each DIMM supports 256/512MB & 1GB DDR2 Each DIMM supports 256/512MB & 1GB DDR2
Max Memory Capicity 2GB
Max Memory Capicity 2GB
Dual Channel Mode DDR2 memory module
Dual Channel Mode DDR2 memory module
Supports DDR2 400 / 533 / 667 / 800
Supports DDR2 400 / 533 / 667 / 800
Integrated in MCP61V Chipset
Integrated in MCP61S Chipset
Max Shared Video Memory is 256MB
Max Shared Video Memory is 256MB
Integrated IDE Controller
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4
supports PIO Mode 0~4
Integrated Serial ATA Controller
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant.
SATA Version 2.0 specification compliant.
Realtek 8201CL PHY
Realtek 8201CL PHY
10 / 100 Mb/s Auto-Negotiation
10 / 100 Mb/s Auto-Negotiation
ALC861
ALC861
8 channels audio out
8 channels audio out
Intel High-Definition Audio support
x2
PCI slot
PCI Express x16 slot (x1 Speed)
x1
PCI Express x 16 slot (x8 Speed)
x1
PCI Express x 1 slot
x1
PCI Express x 1 slot
x1
On Board
Floppy connector
x1
Floppy connector
x1
Connector
IDE Connector
x1
IDE Connector
x1
SATA2 Connector
x2
SATA2 Connector
x2
Front Panel Connector
x1
Front Panel Connector
x1
Front Audio Connector
x1
Front Audio Connector
x1
CD-in Connector
x1
CD-in Connector
x1
S/PDIF out connector
x1
S/PDIF out connector
x1
CPU Fan header
x1
CPU Fan header
x1
System Fan header
x2
System Fan header
x2
Slots
2
Intel High-Definition Audio support
PCI slot
x2
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
Back Panel
I/O
NF61S MICRO AM2
CMOS clear header
x1
CMOS clear header
x1
USB connector
x2
USB connector
x2
Printer Port Connector
x1
Printer Port Connector
x1
Chassis open header(Optional)
x1
Chassis open header(Optional)
x1
Power Connector (24pin)
x1
Power Connector (24pin)
x1
Power Connector (4pin)
x1
Power Connector (4pin)
x1
PS/2 Keyboard
x1
PS/2 Keyboard
x1
PS/2 Mouse
x1
PS/2 Mouse
x1
Serial Port
x1
Serial Port
x1
VGA port
x1
VGA port
x1
LAN port
x1
LAN port
x1
USB Port
x4
USB Port
x4
Audio Jack
x6
Audio Jack
x6
Board Size 205 x 244 (mm) Micro ATX Size Board
205 x 244 (mm) Micro ATX Size Board
Special
NVIDIA nTunes
NVIDIA nTunes
Features
RAID 0 / 1 support
RAID 0 / 1 support
Windows 2000 / XP
Windows 2000 / XP
OS Support Biostar Reserves the right to add or remove
Biostar Reserves the right to add or remove
support for any OS With or without notice.
1.4
support for any OS With or without notice.
REAR PANEL CONNECT ORS
PS/2
Mou se
PS/ 2
Ke ybo ard
L AN
COM1
VGA
C ent er
U SBX2
U SBX2
Line I n
Re ar
Line Out
Sid e
Mic I n
3
Motherboard Manual
1.5
MOT HERBOARD LAYOUT
JDDRII_22V1
JKBMS1
JCFAN1
JATXPWR2
JCOM1
DIMMB1
A M2
DIMMA1
Socket
JVGA1
JUSBV1
JUSB1
IDE1
JUS BLAN1
JATXPWR1
MCP61V
or
MCP61S
AUDIO1
JNFAN1
JAUDIOF1
PCI- EX1_1
JCI 1(Opt ional)
JSATA2
JSATA1
PCI-EX16
LAN
BAT1
JCMOS1
PCI1
JUSB2
BI OS
PCI2
Codec
Super I/O
JUSB3
JSFAN1
JUSB V2
FDD1
JCDIN1 JSPDI F_OUT1
JPRNT1
Not e: ■ represe nts the 1st pin.
4
JPA NE L1
NF61V Micro A M2 / NF61S Micro A M2
CHAPTER 2: HARDWARE INSTALLATION
2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Step 1: Remove the socket protection cap.
Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
5
Motherboard Manual
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
6
NF61V Micro A M2 / NF61S Micro A M2
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Heade r
1
4
JCFAN1
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)
JSFAN1: System Fan He ader
JNFAN1: North Bridge Fan Heade r
JNFAN1
1
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM rate
sense
3
1
3
JSFAN1
Note:
The JCFAN1、JSFAN1 and JNFAN1 support 4-pi n and 3-pin head c onnector. When
connecting with wires onto c onnectors, please note that the red wire is the positi ve and
shoul d be connected to pi n#2, and the bl ac k wire is Ground and s hould be c onnected to
GND.
7
Motherboard Manual
2.3
INST ALLING SYST EM MEMORY
A. Memory Modules
DIMMA1 DIMMB1
8
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
NF61V Micro A M2 / NF61S Micro A M2
B. Memory Capacity
DIMM Socket
Location
DIMMA1
256MB/512MB/1024MB *1
DIMMB1
256MB/512MB/1024MB *1
DDR Module
Total Memory Size
Max memory 2GB.
C. Dual Channel Memory installation
To trigger the Dual Channel f unction of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pair, shown in the following table.
Dual Channel Status
Disabled
DIMMA1
O
DIMMB1
X
Disabled
X
O
Enabled
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
9
Motherboard Manual
2.4
CONNECT ORS AND SLOT S
FDD1: Floppy Disk Conne ctor
The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the
prov ided f loppy drive ribbon cables.
2
34
1
33
IDE1: Hard Disk Conne ctor
The motherboard has a 32-bit Enhanced IDE Controller that prov ides PIO Mode
0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
The IDE connector can connect a master and a slave drive, so y ou can connect
up to two hard disk driv es.
10
40
39
2
1
NF61V Micro A M2 / NF61S Micro A M2
PCI-Ex1_1: PCI-Express x1 Slot
-
PCI-Express 1.0a compliant.
Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.
-
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth ov er the traditional PCI architecture.
PCI-Ex16: PCI-Express x16 Slot (x1 Spee d)(for NF61V MICRO
AM2)
-
PCI-Express 1.0a compliant.
-
Maximum theoretical realized bandwidth of 250MB/s simultaneously per
direction, f or an aggregate of 500MB/s totally.
PCI-Ex16: PCI-Express x16 Slot (x8 Spee d)(for NF61S MICRO
AM2)
-
PCI-Express 1.0a compliant.
-
Maximum theoretical realized bandwidth of 2GB/s simultaneously per
direction, f or an aggregate of 4GB/s totally.
PCI-EX1_1
PCI-EX16
PCI1~PCI2: Pe riphe ral Component Interconne ct Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
11
Motherboard Manual
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW T O SET UP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DET AIL SETT INGS
JPANEL1: Front Panel Heade r
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button and speaker connection. It allows user to connect the PC case’s f ront
panel switch functions.
SLP
P WR_LED
On/Off
+ + -
2
1
16
15
+ SPK
RST
HLED
Pin
1
2
3
4
5
6
7
8
12
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Functio n
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
Sleep control
Ground
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Functio n
Sleep button
N/A
Power LED
Power-on button
NF61V Micro A M2 / NF61S Micro A M2
JATXPWR1: ATX Powe r Source Conne ctor
This connector allows user to connect 24-pin power connector on the ATX
power supply.
12
24
1
13
Pin
Assignment
Pin
Assignment
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
1
2
3
4
5
6
7
8
9
10
11
12
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
JATXPWR2: ATX Powe r Source Conne ctor
By connecting this connector, it will provide +12V to CPU power circuit.
2
3
1
4
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
13
Motherboard Manual
JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.
JUSB2 JUSB3
2
1
10
9
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
Pin
1
2
3
4
5
6
7
8
9
10
JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSBLAN1.
JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV1: USB ports at JUSBLAN1 are powered by +5V standby voltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V
standby v oltage.
1
3
3
JUSBV1
1
1
Pin 1-2 close
3
1
1
3
3
1
3
Pin 2-3 close
JUSBV2
Note:
In order to s upport this function “Power-On s ystem vi a USB devic e,” “JUSBV1/ JUSBV2”
jumper cap should be plac ed on Pin 2-3 indi viduall y.
14
NF61V Micro A M2 / NF61S Micro A M2
JAUDIO F1: Front Panel Audio Heade r
This header allows user to connect the front audio output cable with the PC f ront
panel. It will disable the output on back panel audio connectors.
Pin
1
2
3
4
5
1
2
9
10
6
7
8
9
10
Assignment
Mic in
Ground
Mic power
Audio power
Right line
out
Ground
Reserved
Key
Left line out
Ground
JCDIN1: CD-RO M Audio-in Connector
This connector allows user to connect the audio source f rom the v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.
Pin
1
2
3
4
4
Assignment
Left Channel
Input
Ground
Ground
Right Channel
Input
1
15
Motherboard Manual
JCMO S1: Cle ar CMOS Heade r
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
1
3
Pin 1-2 Close:
Normal Operation
(default).
1
1
3
3
Pin 2-3 Close:
Clear CMOS
data.
※ Clear CMOS Proce dures:
1.
2.
3.
4.
5.
6.
Remov e AC power line.
Set the jumper to “Pin 2-3 close”.
Wait f or f ive seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset y our desired password or clear the CMOS data.
JCI1: Chassis O pen Heade r (Optional)
This connector allows system to monitor PC case open status. If the signal has
been triggered, it will record to the CMOS and show the message on next
boot-up.
Pin
1
1 2
16
2
Assignment
Case open
signal
Ground
NF61V Micro A M2 / NF61S Micro A M2
JPRNT1: Printe r Port Connector
This header allows you to connector printer on the PC.
2
1
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5
25
Pin
14
15
16
17
18
19
20
21
22
23
24
25
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
JSATA1~JSATA2: Se rial ATA Connectors
The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
1
4
7
Pin
1
2
3
4
5
6
7
Assignment
Ground
T X+
T XGround
RXRX+
Ground
JSATA1 JSATA2
17
Motherboard Manual
He ade r for Memory ove r-voltage: JDDRII_22V1
When processing Memory ov er-voltage, please place the jumper to pin2-3
Closed. The Def ault setting is Pin 1-2 Closed.
1
1
3
3
Pin 1-2 Cl ose:
Normal status (defa ult).
1
3
Pin 2-3 Cl ose:
Memory voltag e 2.2V.
Note:
1.
When “JDDRII_2.2V” jumper cap is placed on Pin 1-2, memory v oltage
can be manually adjusted in CMOS setup screen.
2.
When “JDDRII_2.2V” jumper cap is placed on Pin 2-3, memory v oltage
will be f ixed at 2.2V automatically, and can’t be adjusted under COMS
setup.
Bef ore setting memory over-v oltage, please ensure that your DDR2 supports up
to 2.2V. (Consult your DDR2 supplier)
JSPDIF_O UT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
3
18
1
Assignment
+5V
SPDIF_OUT
Ground
NF61V Micro A M2 / NF61S Micro A M2
CHAPTER 4: RAID FUNCTIONS
4.1 O PERAT ION SYST EM
Supports Windows XP Home/Prof essional Edition, and Windows 2000 Professional.
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
4.3
HOW RAID WORKS
RAID 0:
The controller “ stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the
platf orm.
Uses: Intended for non-critical data requiring high data throughput, or any
env ironment that does not require f ault tolerance.
Benefits: prov ides increased data throughput, especially f or large files. No
capacity loss penalty f or parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
f ails, all data is lost.
Fault Tolerance: No.
Block 1
Block 3
Block 5
Block 2
Bl ock 4
Bl ock 6
19
Motherboard Manual
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on
a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if
the active volume or drive is corrupted or becomes unavailable because of a hardware
failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive and less
reliable media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires f ault tolerance and minimal capacity.
Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the
controller switches to the other drive.
Drawbacks: Requires 2 driv es for the storage space of one driv e.
Perf ormance is impaired during driv e rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
20
Block 1
Block 2
Block 3
NF61V Micro A M2 / NF61S Micro A M2
CHAPTER 5: USEFUL HELP
5.1 DRIVER INST ALLAT ION NOT E
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you ins ert the Driver CD, please use file brows er to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html
21
Motherboard Manual
5.2
AWARD BIOS BEEP CODE
Beep Sound
One long beep followed by two short
beeps
High-low siren sound
Meaning
Video card not found or v ideo card
memory bad
CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second
No DRAM detected or install
5.3
EXT RA INFORMAT ION
A. BIOS Update
After you fail to update BIOS or BIOS is invaded by virus, the
Boot-Block function will help to restore BIOS. If the following message
is shown after boot-up the system, it means the BIOS contents are
corrupted.
In this Case, please follow the procedure below to restore the BIOS:
1. Make a bootable floppy disk.
2. Download the Flash Utility “AWDFLASH.exe” from the Biostar
website: www.biostar.com.tw
3. Confirm motherboard model and download the respectively BIOS
from Biostar website.
4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk.
5. Insert the bootable disk into floppy drive and press Enter.
6. System will boot-up to DOS prompt.
7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt.
(xxxx means BIOS name.)
8. System will update BIOS automatically and restart.
9. The BIOS has been recovered and will work properly.
22
NF61V Micro A M2 / NF61S Micro A M2
B. CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
23
Motherboard Manual
5.4
TROUBLESHOOT ING
Probable
Solution
1.
Make sure power cable is
No power to the system at all
securely plugged in.
Power light don’t illuminate, f an
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard driv e is spinning.
module snaps into place.
1.
System does not boot from hard disk
1.
driv e, can be booted f rom optical driv e.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the driv e type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
1.
Back up data and applications
System only boots f rom optical driv e.
f iles.
Hard disk can be read and applications
can be used but booting from hard disk 2.
Ref ormat the hard driv e.
is impossible.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Rev iew system’s equipment. Make sure
Conf iguration” or “CMOS Failure.”
correct inf ormation is in setup.
Cannot boot system after installing
1.
Set master/slave jumpers
second hard driv e.
correctly.
2.
Run SETUP program and select
correct driv e types. Call the drive
manuf acturers f or compatibility
with other drives.
24
NF61V Micro A M2 / NF61S Micro A M2
CHAPTER 6: WARPSPEEDER™
6.1
INT RODUCT ION
[WarpSpeeder™], a new powerful control utility, features three
user-friendly functions including Overclock Manager, Overvoltage
Manager, and Hardware Monitor.
With the Overclock Manager, users can easily adjust the frequency they
prefer or they can get the best CPU performance with just one click. The
Overvoltage Manager, on the other hand, helps to power up CPU core
voltage and Memory voltage. The cool Hardware Monitor smartly indicates
the temperatures, voltage and CPU fan speed as well as the chipset
information. Also, in the About panel, you can get detail descriptions about
BIOS model and chipsets. In addition, the frequency status of CPU,
memory, AGP and PCI along with the CPU speed are synchronically
shown on our main panel.
Moreover, to protect users' computer systems if the setting is not
appropriate when testing and results in system fail or hang,
[WarpSpeeder™] technology assures the system stability by automatically
rebooting the computer and then restart to a speed that is either the
original system speed or a suitable one.
6.2
SYST EM REQUIREMENT
OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP
DirectX: DirectX 8.1 or above. (The Windows XP operating system
includes DirectX 8.1. If you use Windows XP, you do not need to install
DirectX 8.1.)
25
Motherboard Manual
6.3
INST ALLAT ION
1. Execute the setup execution file, and then the following dialog will pop
up. Please click “Next” button and follow the default procedure to
install.
2. When you see the following dialog in setup procedure, it means setup
is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox
is checked, the Tray Icon utility and [WarpSpeeder™] utility will be
automatically and immediately launched after you click “Finish”
button.
Usage :
The following figures are just only for reference, the screen printed in
this user manual will change according to your motherboard on hand.
26
NF61V Micro A M2 / NF61S Micro A M2
6.4
WARPSPEEDER™
1. Tray Icon:
Whenever the Tray Icon utility is launched, it will display a little tray
icon on the right side of Windows Taskbar.
This utility is responsible for conveniently invoking [WarpSpeeder™]
Utility. You can use the mouse by clicking the left button in order to
invoke [WarpSpeeder™] directly from the little tray icon or you can
right-click the little tray icon to pop up a popup menu as following
figure. The “Launch Utility” item in the popup menu has the same
function as mouse left-click on tray icon and “Exit” item will close
Tray Icon utility if selected.
27
Motherboard Manual
2. Main Panel
If you click the tray icon, [WarpSpeeder™] utility will be invoked.
Please refer to the following figure; the utility’s first window you will
see is Main Panel.
Main Panel contains fe ature s as follows:
a.
b.
c.
28
Display the CPU Speed, CPU external clock, Memory clock, AGP clock,
and PCI clock information.
Contains About, Voltage, Overclock, and Hardware Monitor Buttons for
invoking respective panels.
With a user-friendly Status Animation, it can represent 3 overclock
percentage stages:
Man walking→overclock percentage from 100% ~ 110 %
Panther running→overclock percentage from 110% ~ 120%
Car racing→overclock percentage from 120% ~ above
NF61V Micro A M2 / NF61S Micro A M2
3. Voltage Panel
Click the Voltage button in Main Panel, the button will be highlighted
and the Voltage Panel will slide out to up as the following figure.
In this panel, you can decide to increase CPU core voltage and
Memory voltage or not. The default setting is “No”. If you want to get
the best performance of overclocking, we recommend you click the
option “Yes”.
29
Motherboard Manual
4. Overclock Panel
Click the Overclock button in Main Panel, the button will be
highlighted and the Overclock Panel will slide out to left as the
following figure.
O ve rclock Panel contains the these features:
a.
“–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”:
provide user the ability to do real-time overclock adjustment.
Warning:
Manually overclock is potentially dangerous, especially when the
ov erclocking percentage is over 110 %. We strongly recommend you
v erify ev ery speed you overclock by click the Verify button. Or, you can
just click Auto ov erclock button and let [WarpSpeeder™] automatically
gets the best result f or y ou.
b.
30
“Recovery Dialog button”: Pop up the following dialog. Let user select
a restoring way if system need to do a fail-safe reboot.
c.
d.
NF61V Micro A M2 / NF61S Micro A M2
“Auto-overclock button”: User can click this button and
[WarpSpeeder™] will set the best and stable performance and
frequency automatically. [WarpSpeeder™] utility will execute a
series of testing until system fail. Then system will do fail-safe
reboot by using Watchdog function. After reboot, the
[WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
“Verify button”: User can click this button and [WarpSpeeder™]
will proceed a testing for current frequency. If the testing is ok,
then the current frequency will be saved into system registry. If
the testing fail, system will do a fail-safe rebooting. After reboot,
the [WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
Note:
Because the testing programs, invoked in Auto-overclock and Verify,
include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or
newer runtime library is required. And please make sure y our display
card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is
required f or Direct3D rendering.
5. Hardware Monitor Panel
Click the Hardware Monitor button in Main Panel, the button will be
highlighted and the Hardware Monitor panel will slide out to left as
the following figure.
In this panel, you can get the real-time status information of your
system. The information will be refreshed every 1 second.
31
Motherboard Manual
6. About Panel
Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will slide out to up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the mainboard’s BIOS model and the Version number of
[WarpSpeeder™] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™] divide
these features to separate panels. If one chipset is not on board, the
correlative button in Main panel will be disabled, but will not interfere
other panels’ functions. This property can make [WarpSpeeder™]
utility more robust.
32
NF61V Micro A M2 / NF61S Micro A M2
This page is intentionally left blank
33
Motherboard Manual
APPENDENCIES: SPEC IN OTHER LANGUAGE
GERMAN
NF61V MICRO AM2
CPU
FSB
Chipsatz
Super E/A
Arbeitsspeic
her
Grafik
IDE
SATA II
NF61S MICRO AM2
Sockel AM2
Sockel AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
Sempron Prozessoren
Sempron Prozessoren
Unterstützt Hyper Transport und Cool’n’Quiet
Unterstützt Hyper Transport und Cool’n’Quiet
Unterstützt HyperTransport mit einer Bandbreite Unterstützt HyperTransport mit einer Bandbreite
von bis zu 1 GHz
von bis zu 1 GHz
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
ITE 8716F
ITE 8716F
Bietet die häufig verwendeten alten Super
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
E/A-Funktionen.
Low Pin Count-Schnittstelle
Low Pin Count-Schnittstelle
DDR2 DIMM-Steckplätze x 2
DDR2 DIMM-Steckplätze x 2
Jeder DIMM unterstützt 256/512MB & 1GB
Jeder DIMM unterstützt 256/512MB & 1GB
DDR2.
DDR2.
Max. 2GB Arbeitsspeicher
Max. 2GB Arbeitsspeicher
Dual-Kanal DDR2 Speichermodul
Dual-Kanal DDR2 Speichermodul
Unterstützt DDR2 400 / 533 / 667 / 800
Unterstützt DDR2 400 / 533 / 667 / 800
registrierte
registrierte
Integrierter MCP61V Chipsatz
Integrierter MCP61S Chipsatz
Max. 256MB gemeinsam benutzter
Max. 256MB gemeinsam benutzter
Videospeicher
Videospeicher
Integrierter IDE-Controller
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus
Unterstützt PIO-Modus 0~4,
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Integrierter Serial ATA-Controller
Datentransferrate bis zu 3Gb/s
Datentransferrate bis zu 3Gb/s
Konform mit der SATA-Spezifikation Version 2.0. Konform mit der SATA-Spezifikation Version 2.0.
LAN
Audio-Code
c
Realtek 8201CL PHY
Realtek 8201CL PHY
10 / 100 Mb/s Auto-Negotiation
10 / 100 Mb/s Auto-Negotiation
ALC861
ALC861
8-Kanal-Audioausgabe
8-Kanal-Audioausgabe
Unterstützt Intel High-Definition Audio
PCI-Steckplatz
Steckplätze PCI Express x16 Steckplatz (x1)
PCI Express x 1-Steckplatz
Unterstützt Intel High-Definition Audio
x2
PCI-Steckplatz
x2
x1
PCI Express x16 Steckplatz (x8)
x1
x1
PCI Express x 1-Steckplatz
x1
Onboard-A Diskettenlaufwerkanschluss
x1
Diskettenlaufwerkanschluss
x1
IDE-Anschluss
x1
IDE-Anschluss
x1
SATA2-Anschluss
x2
SATA2-Anschluss
x2
nschluss
34
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
RückseitenE/A
Platinengrö
ße.
NF61S MICRO AM2
Fronttafelanschluss
x1
Fronttafelanschluss
x1
Front-Audioanschluss
x1
Front-Audioanschluss
x1
CD-IN-Anschluss
x1
CD-IN-Anschluss
x1
S/PDIF- Ausgangsanschluss
x1
S/PDIF- Ausgangsanschluss
x1
CPU-Lüfter-Sockel
x1
CPU-Lüfter-Sockel
x1
System-Lüfter-Sockel
x2
System-Lüfter-Sockel
x2
"CMOS löschen"-Sockel
x1
"CMOS löschen"-Sockel
x1
USB-Anschluss
x2
USB-Anschluss
x2
Druckeranschluss-Anschluss
x1
Druckeranschluss-Anschluss
x1
"Gehäuse offen"-Sockel(optional)
x1
"Gehäuse offen"-Sockel(optional)
x1
Stromanschluss (24-polig)
x1
Stromanschluss (24-polig)
x1
Stromanschluss (4-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur
x1
PS/2-Tastatur
x1
PS/2-Maus
x1
PS/2-Maus
x1
Serieller Anschluss
x1
Serieller Anschluss
x1
VGA-Anschluss
x1
VGA-Anschluss
x1
LAN-Anschluss
x1
LAN-Anschluss
x1
USB-Anschluss
x4
USB-Anschluss
x4
Audioanschluss
x6
Audioanschluss
x6
205 mm (B) X 244 mm (L)
205 mm (B) X 244 mm (L)
Sonderfunk NVIDIA nTunes
NVIDIA nTunes
tionen
Unterstützt RAID 0 / 1
Unterstützt RAID 0 / 1
Windows 2000 / XP
Windows 2000 / XP
OS-Unterst Biostar behält sich das Recht vor, ohne
Biostar behält sich das Recht vor, ohne
ützung
Ankündigung die Unterstützung für ein
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu entfernen. Betriebssystem hinzuzufügen oder zu entfernen.
35
Motherboard Manual
FRANCE
NF61V MICRO AM2
UC
NF61S MICRO AM2
Socket AM2
Socket AM2
Processeurs AMD Athlon 64 / Athlon 64 FX /
Processeurs AMD Athlon 64 / Athlon 64 FX /
Athlon 64 x2/ Sempron
Athlon 64 x2/ Sempron
Prend en charge Hyper Transport et Cool’n’Quiet Prend en charge Hyper Transport et Cool’n’Quiet
Bus frontal
Chipset
Prend en charge Hyper Transport jusqu'à une
Prend en charge Hyper Transport jusqu'à une
bande passante de1 GHz
bande passante de1 GHz
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
ITE 8716F
ITE 8716F
Fournit la fonctionnalité de Super E/S
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
patrimoniales la plus utilisée.
Interface à faible compte de broches
Interface à faible compte de broches
Fentes DDR2 DIMM x 2
Fentes DDR2 DIMM x 2
Chaque DIMM prend en charge des DDR2 de
Chaque DIMM prend en charge des DDR2 de
Mémoire
256/512 Mo et 1Go
256/512 Mo et 1Go
principale
Capacité mémoire maximale de 2 Go
Capacité mémoire maximale de 2 Go
Super E/S
Module de mémoire DDR2 à mode à double voie Module de mémoire DDR2 à mode à double voie
Prend en charge la DDR2 400 / 533 / 667 / 800 Prend en charge la DDR2 400 / 533 / 667 / 800
Graphiques
IDE
SATA II
LAN
Integré dans la chipset MCP61V
Integré dans la chipset MCP61S
Mémoire vidéo partagée maximale de 256 Mo
Mémoire vidéo partagée maximale de 256 Mo
Contrôleur IDE intégré
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 / 100 / Mode principale de Bus Ultra DMA 33 / 66 / 100 /
133
133
Prend en charge le mode PIO 0~4,
Prend en charge le mode PIO 0~4,
Contrôleur Serial ATA intégré :
Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 3 Go/s.
Taux de transfert jusqu'à 3 Go/s.
Conforme à la spécification SATA Version 2.0
Conforme à la spécification SATA Version 2.0
Realtek 8201CL PHY
Realtek 8201CL PHY
10 / 100 Mb/s négociation automatique
10 / 100 Mb/s négociation automatique
ALC861
ALC861
Codec audio Sortie audio à 8 voies
Fentes
Prise en charge de l'audio haute définition Intel
Fente PCI
x2
Fente PCI
Slot PCI Express x16 (x1)
x1
Slot PCI Express x16 (x8)
x1
Slot PCI Express x 1
x1
Slot PCI Express x 1
x1
Connecteur Connecteur de disquette
embarqué
36
Sortie audio à 8 voies
Prise en charge de l'audio haute définition Intel
x2
x1
Connecteur de disquette
x1
Connecteur IDE
x1
Connecteur IDE
x1
Connecteur SATA2
x2
Connecteur SATA2
x2
Connecteur du panneau avant
x1
Connecteur du panneau avant
x1
Connecteur Audio du panneau avant
x1
Connecteur Audio du panneau avant
x1
Connecteur d'entrée CD
x1
Connecteur d'entrée CD
x1
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
NF61S MICRO AM2
Connecteur de sortie S/PDIF
x1
Connecteur de sortie S/PDIF
x1
Embase de ventilateur UC
x1
Embase de ventilateur UC
x1
Embase de ventilateur système
x2
Embase de ventilateur système
x2
Embase d'effacement CMOS
x1
Embase d'effacement CMOS
x1
Connecteur USB
x2
Connecteur USB
x2
Connecteur de Port d'imprimante
x1
Connecteur de Port d'imprimante
x1
Embase d'ouverture de châssis(en option)x1
Embase d'ouverture de châssis(en option)x1
Connecteur d'alimentation
Connecteur d'alimentation
x1
(24 broches)
Connecteur d'alimentation
x1
(24 broches)
x1
(4 broches)
Connecteur d'alimentation
x1
(4 broches)
Clavier PS/2
x1
Clavier PS/2
Souris PS/2
x1
Souris PS/2
x1
E/S du
Port série
x1
Port série
x1
panneau
Port VGA
x1
Port VGA
x1
arrière
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Fiche audio
x6
Fiche audio
x6
Dimensions
de la carte
Fonctionnali
tés
spéciales
205 mm (l) X 244 mm (H)
205 mm (l) X 244 mm (H)
NVIDIA nTunes
NVIDIA nTunes
Prise en charge RAID 0 / 1
Prise en charge RAID 0 / 1
Windows 2000 / XP
Windows 2000 / XP
Support SE Biostar se réserve le droit d'ajouter ou de
x1
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis.
37
Motherboard Manual
IT ALIAN
NF61V MICRO AM2
NF61S MICRO AM2
Socket AM2
Socket AM2
Processori AMD Athlon 64 / Athl on 64 FX Processori AMD Athlon 64 / Athl on 64 FX
CPU
FSB
Chipset
Super I/O
/ Athlon 64 x 2/ Sempr on
/ Athlon 64 x 2/ Sempr on
Supporto di Hyper Tra nsport e
Supporto di Hyper Tra nsport e
Cool’n’Quiet
Cool’n’Quiet
Supporto di Hyper Transport fi no a1 GHz
Supporto di Hyper Transport fi no a1 GHz
di larghezza di ba nda
di larghezza di ba nda
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
ITE 8716F
ITE 8716F
Fornisce le funzio nalità legacy Super I/O Fornisce le funzio nalità legacy Super I/O
usate più comunemente.
usate più comunemente.
Interfaccia LPC (L ow Pin Count)
Interfaccia LPC (L ow Pin Count)
Alloggi DIMM DDR 2 x 2
Alloggi DIMM DDR 2 x 2
Ciascun DIMM supporta DDR 2
Ciascun DIMM supporta DDR 2
Memoria
256/512MB e 1GB
256/512MB e 1GB
principale
Capacità massima della memori a 2GB
Capacità massima della memori a 2GB
Modulo di memoria DDR2 a canale doppi o Modulo di memoria DDR2 a canale doppi o
Supporto di DDR2 400 / 533 / 667 / 800 Supporto di DDR2 400 / 533 / 667 / 800
Integrata nel Chi pset MCP61S
Integrata nel Chi pset MCP61V
Grafica
IDE
La memoria video condivisa massima è di La memoria video condivisa massima è di
256MB
256MB
Controller IDE i ntegrato
Controller IDE i ntegrato
Modalità Bus Master Ultra DMA 33 / 66 / Modalità Bus Master Ultra DMA 33 / 66 /
100 / 133
100 / 133
Supporto modalità PIO Mode 0- 4
Supporto modalità PIO Mode 0- 4
Controller Serial ATA inte grato
Controller Serial ATA inte grato
Velocità di trasferimento dei dati fi no a 3 Velocità di trasferimento dei dati fi no a 3
SATA II
LAN
Codec audio
Alloggi
38
Gb/s.
Gb/s.
Compatibile specifiche SATA Versione
Compatibile specifiche SATA Versione
2.0.
2.0.
Realtek 8201CL PHY
Realtek 8201CL PHY
Negoziazione automatica 10 / 100 Mb/s
Negoziazione automatica 10 / 100 Mb/s
ALC861
ALC861
Uscita audio 8 ca nali
Uscita audio 8 ca nali
Supporto audio High- Defi nition (HD)
Supporto audio High- Defi nition (HD)
Intel
Intel
Alloggio PCI
x2
Alloggio PCI
x2
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
Connettori su
scheda
NF61S MICRO AM2
Alloggio PCI Ex press x16 (x 1)
x1
Alloggio PCI Ex press x16 (x 8)
x1
Alloggio PCI Ex press x1
x1
Alloggio PCI Ex press x1
x1
Connettore flo ppy
x1
Connettore flo ppy
x1
Connettore IDE
x1
Connettore IDE
x1
Connettore SATA2
x2
Connettore SATA2
x2
Connettore pa nnello fro ntale
x1
Connettore pa nnello fro ntale
x1
Connettore audio frontale
x1
Connettore audio frontale
x1
Connettore CD-in
x1
Connettore CD-in
x1
Connettore output SPDIF
x1
Connettore output SPDIF
x1
Collettore ventolina CPU
x1
Collettore ventolina CPU
x1
Collettore ventolina sistema
x2
Collettore ventolina sistema
x2
Collettore cancellazione CMOS
x1
Collettore cancellazione CMOS
x1
Connettore USB
x2
Connettore USB
x2
Connettore Porta stampa nte
x1
Connettore Porta stampa nte
x1
Collettore apertur a telaio( optional)
Connettore alimentazione
x1
(24 pin)
Connettore alimentazione
posteriore
Dimensioni
scheda
Connettore alimentazione
Connettore alimentazione
Tastiera PS/2
x1
Tastiera PS/2
Mouse PS/2
x1
Mouse PS/2
x1
Porta seriale
x1
Porta seriale
x1
Porta VGA
x1
Porta VGA
x1
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Connettore audio
x6
Connettore audio
x6
nTunes NVI DIA
Supporto RAID 0 / 1
Supporto RAID 0 / 1
Windows 2000 / XP
Windows 2000 / XP
supportati
x1
205 mm (larghezza) x 244 mm (altezza) 205 mm (larghezza) x 244 mm (altezza)
speciali
operativi
x1
(4 pi n)
Caratteristiche nTunes NVI DIA
Sistemi
x1
x1
(24 pin)
x1
(4 pi n)
I/O pannello
x1 Collettore apertur a telaio( optional)
Biostar si riserva il diritto di aggiungere o Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema rimuovere il supporto di qualsiasi sistema
operativo se nza pre avviso.
operativo se nza pre avviso.
39
Motherboard Manual
SPANISH
NF61V MICRO AM2
CPU
FSB
Conjunto de
chips
Súper E/S
Memoria
principal
Gráficos
IDE
SATA II
Red Local
Códecs de
sonido
NF61S MICRO AM2
Conector AM2
Conector AM2
Procesadores AMD Athlon 64 / Athlon 64 FX /
Procesadores AMD Athlon 64 / Athlon 64 FX /
Athlon 64 x2/ Sempron
Athlon 64 x2/ Sempron
Soporta las tecnologías Hyper Transport y
Soporta las tecnologías Hyper Transport y
Cool’n’Quiet
Cool’n’Quiet
Admite HyperTransport con un ancho de banda Admite HyperTransport con un ancho de banda
de hasta1 GHz
de hasta1 GHz
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
ITE 8716F
ITE 8716F
Le ofrece las funcionalidades heredadas de uso Le ofrece las funcionalidades heredadas de uso
más común Súper E/S.
más común Súper E/S.
Interfaz de cuenta Low Pin
Interfaz de cuenta Low Pin
Ranuras DIMM DDR2 x 2
Ranuras DIMM DDR2 x 2
Cada DIMM admite DDR de 256/512MB y 1GB
Cada DIMM admite DDR de 256/512MB y 1GB
Capacidad máxima de memoria de 2GB
Capacidad máxima de memoria de 2GB
Módulo de memoria DDR2 de canal Doble
Módulo de memoria DDR2 de canal Doble
Admite DDR2 de 400 / 533 / 667 / 800
Admite DDR2 de 400 / 533 / 667 / 800
Integrados en el conjunto de chips MCP61V
Integrados en el conjunto de chips MCP61S
Memoria máxima de vídeo compartida de
Memoria máxima de vídeo compartida de
256MB
256MB
Controlador IDE integrado
Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Soporte los Modos PIO 0~4,
Controlador ATA Serie Integrado
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 3 Gb/s.
Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2.0.
Compatible con la versión SATA 2.0.
Realtek 8201CL PHY
Realtek 8201CL PHY
Negociación de 10 / 100 Mb/s
Negociación de 10 / 100 Mb/s
ALC861
ALC861
Salida de sonido de 8 canales
Salida de sonido de 8 canales
Soporte de sonido Intel de Alta Definición
Soporte de sonido Intel de Alta Definición
Ranura PCI
X2
Ranura PCI
Ranura PCI Express x16 (x1)
X1
Ranura PCI Express x16 (x8)
X1
Ranura PCI express x 1
X1
Ranura PCI express x 1
X1
Conectores Conector disco flexible
X1
Conector disco flexible
X1
en placa
Conector IDE
X1
Conector IDE
X1
Conector SATA2
X2
Conector SATA2
X2
Ranuras
40
X2
Conector de panel frontal
X1
Conector de panel frontal
X1
Conector de sonido frontal
X1
Conector de sonido frontal
X1
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
NF61S MICRO AM2
Conector de entrada de CD
X1
Conector de entrada de CD
X1
Conector de salida S/PDIF
X1
Conector de salida S/PDIF
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de sistema
X2
Cabecera de ventilador de sistema
X2
Cabecera de borrado de CMOS
X1
Cabecera de borrado de CMOS
X1
Conector USB
X2
Conector USB
X2
Conector Puerto de impresora
X1
Conector Puerto de impresora
X1
Cabecera de chasis abierto(opcional)
X1
Cabecera de chasis abierto(opcional)
X1
Conector de alimentación
X1
Conector de alimentación
X1
(24 patillas)
Conector de alimentación
(24 patillas)
X1
(4 patillas)
Conector de alimentación
X1
(4 patillas)
Teclado PS/2
X1
Teclado PS/2
Ratón PS/2
X1
Ratón PS/2
X1
Panel
Puerto serie
X1
Puerto serie
X1
trasero de
Puerto VGA
X1
Puerto VGA
X1
E/S
Puerto de red local
X1
Puerto de red local
X1
Puerto USB
X4
Puerto USB
X4
Conector de sonido
X6
Conector de sonido
X6
Tamaño de
la placa
205 mm. (A) X 244 Mm. (H)
205 mm. (A) X 244 Mm. (H)
Funciones
NVIDIA nTunes
NVIDIA nTunes
especiales
Admite RAID 0 / 1
Admite RAID 0 / 1
Soporte de Windows 2000 / XP
X1
Windows 2000 / XP
sistema
Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar
operativo
el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.
41
Motherboard Manual
PORT UGUESE
NF61V MICRO AM2
CPU
FSB
Chipset
NF61S MICRO AM2
Socket AM2
Socket AM2
Processadores AMD Athlon 64 / Athlon 64 FX /
Processadores AMD Athlon 64 / Athlon 64 FX /
Athlon 64 x2/ Sempron
Athlon 64 x2/ Sempron
Suporta as tecnologias Hyper Transport e
Suporta as tecnologias Hyper Transport e
Cool’n’Quiet
Cool’n’Quiet
Suporta a tecnologia HyperTransport com uma Suporta a tecnologia HyperTransport com uma
largura de banda até1 GHz
largura de banda até1 GHz
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
ITE 8716F
ITE 8716F
Especificaçã Proporciona as funcionalidades mais utilizadas
Proporciona as funcionalidades mais utilizadas
o Super I/O em termos da especificação Super I/O.
em termos da especificação Super I/O.
Interface LPC (Low Pin Count).
Interface LPC (Low Pin Count).
Ranhuras DIMM DDR2 x 2
Ranhuras DIMM DDR2 x 2
Cada módulo DIMM suporta uma memória
Cada módulo DIMM suporta uma memória
Memória
DDR2 de 256/512 MB & 1 GB
DDR2 de 256/512 MB & 1 GB
principal
Capacidade máxima de memória: 2 GB
Capacidade máxima de memória: 2 GB
Módulo de memória DDR2 de canal duplo
Módulo de memória DDR2 de canal duplo
Suporta módulos DDR2 400 / 533 / 667 / 800
Suporta módulos DDR2 400 / 533 / 667 / 800
Placa
Integrada no chipset MCP61V
Integrada no chipset MCP61S
gráfica
Memória de vídeo máxima partilhada: 256 MB
Memória de vídeo máxima partilhada: 256 MB
Controlador IDE integrado
Controlador IDE integrado
IDE
SATA II
Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o modo PIO 0~4,
Suporta o modo PIO 0~4,
Controlador Serial ATA integrado
Controlador Serial ATA integrado
Velocidades de transmissão de dados até 3 Gb/s. Velocidades de transmissão de dados até 3 Gb/s.
Compatibilidade com a especificação SATA
Compatibilidade com a especificação SATA
versão 2.0.
versão 2.0.
Realtek 8201CL PHY
Realtek 8201CL PHY
Auto negociação de 10 / 100 Mb/s
Auto negociação de 10 / 100 Mb/s
ALC861
ALC861
Codec de
Saída de áudio de 8 canais
Saída de áudio de 8 canais
som
Suporta a especificação Intel High-Definition
Suporta a especificação Intel High-Definition
Audio
Audio
LAN
Ranhuras
Ranhura PCI
x2
Ranhura PCI
Ranhura PCI Express x16 (x1)
x1
Ranhura PCI Express x16 (x8)
x1
Ranhura PCI Express x 1
x1
Ranhura PCI Express x 1
x1
Conectores Conector da unidade de disquetes
na placa
42
x2
x1
Conector da unidade de disquetes
x1
Conector IDE
x1
Conector IDE
x1
Conector SATA2
x2
Conector SATA2
x2
Conector do painel frontal
x1
Conector do painel frontal
x1
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
NF61S MICRO AM2
Conector de áudio frontal
x1
Conector de áudio frontal
x1
Conector para entrada de CDs
x1
Conector para entrada de CDs
x1
Conector de saída S/PDIF
x1
Conector de saída S/PDIF
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x2
Conector da ventoinha do sistema
x2
Conector para limpeza do CMOS
x1
Conector para limpeza do CMOS
x1
Conector USB
x2
Conector USB
x2
Conector da para impressora
x1
Conector da para impressora
x1
Conector para detecção da
Conector para detecção da
abertura do chassis(opcional)
x1
abertura do chassis(opcional)
x1
Conector de alimentação
x1
Conector de alimentação
x1
(24 pinos)
Conector de alimentação
(24 pinos)
x1
(4 pinos)
Entradas/S
aídas no
painel
traseiro
Tamanho
da placa
Característi
cas
especiais
Sistemas
operativos
suportados
Conector de alimentação
x1
(4 pinos)
Teclado PS/2
x1
Teclado PS/2
x1
Rato PS/2
x1
Rato PS/2
x1
Porta série
x1
Porta série
x1
Porta VGA
x1
Porta VGA
x1
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Tomada de áudio
x6
Tomada de áudio
x6
205 mm (L) X 244 mm (A)
205 mm (L) X 244 mm (A)
nTunes da NVIDIA
nTunes da NVIDIA
Suporta as funções RAID 0 / 1
Suporta as funções RAID 0 / 1
Windows 2000 / XP
Windows 2000 / XP
A Biostar reserva-se o direito de adicionar ou
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.
operativo com ou sem aviso prévio.
43
Motherboard Manual
POLISH
NF61V MICRO AM2
Procesor
FSB
Chipset
Pamięć
główna
Super I/O
Grafika
IDE
SATA II
LAN
Kodek
dźwiękowy
Gniazda
Złącza
Socket AM2
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
Sempron Procesory
Sempron Procesory
Obsługa Hyper Transport oraz Cool’n’Quiet
Obsługa Hyper Transport oraz Cool’n’Quiet
Obsługa HyperTransport o szerokości pasma do1 Obsługa HyperTransport o szerokości pasma do1
GHz
GHz
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
Gniazda DDR2 DIMM x 2
Gniazda DDR2 DIMM x 2
Każde gniazdo DIMM obsługuje moduły
Każde gniazdo DIMM obsługuje moduły
256/512MB oraz 1GB DDR2
256/512MB oraz 1GB DDR2
Maks. wielkość pamięci 2GB
Maks. wielkość pamięci 2GB
Moduł pamięci DDR2 z trybem podwójnego
Moduł pamięci DDR2 z trybem podwójnego
kanału
kanału
Obsługa DDR2 400 / 533 / 667 / 800
Obsługa DDR2 400 / 533 / 667 / 800
ITE 8716F
ITE 8716F
Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super
I/O.
I/O.
Interfejs Low Pin Count
Interfejs Low Pin Count
Zintegrowana w chipsecie MCP61V
Zintegrowana w chipsecie MCP61S
Maks. wielkość współdzielonej pamięci video
Maks. wielkość współdzielonej pamięci video
wynosi 256MB
wynosi 256MB
Zintegrowany kontroler IDE
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master
obsługa PIO tryb 0~4,
obsługa PIO tryb 0~4,
Zintegrowany kontroler Serial ATA
Zintegrowany kontroler Serial ATA
Transfer danych do 3 Gb/s.
Transfer danych do 3 Gb/s.
Zgodność ze specyfikacją SATA w wersji 2.0.
Zgodność ze specyfikacją SATA w wersji 2.0.
Realtek 8201CL PHY
Realtek 8201CL PHY
10 / 100 Mb/s z automatyczną negocjacją
10 / 100 Mb/s z automatyczną negocjacją
szybkości
szybkości
ALC861
ALC861
8 kanałowe wyjście audio
8 kanałowe wyjście audio
Obsługa Intel High-Definition Audio
Obsługa Intel High-Definition Audio
Gniazdo PCI
x2
Gniazdo PCI
x2
Gniazdo PCI Express x16 (x1)
x1
Gniazdo PCI Express x16 (x8)
x1
Gniazdo PCI Express x 1
x1
Gniazdo PCI Express x 1
x1
Złącze napędu dyskietek
x1
Złącze napędu dyskietek
x1
x1
Złącze IDE
x1
x2
Złącze SATA2
x2
wbudowane Złącze IDE
Złącze SATA2
44
NF61S MICRO AM2
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
NF61S MICRO AM2
Złącze panela przedniego
x1
Złącze panela przedniego
x1
Przednie złącze audio
x1
Przednie złącze audio
x1
Złącze wejścia CD
x1
Złącze wejścia CD
x1
Złącze wyjścia S/PDIF
x1
Złącze wyjścia S/PDIF
x1
Złącze główkowe wentylatora
procesora
Złącze główkowe wentylatora
x1
Złącze główkowe wentylatora
systemowego
x2
Wymiary
płyty
systemowego
x2
Złącze główkowe kasowania
CMOS
x1
CMOS
x1
Złącze USB
x2
Złącze USB
x2
Złącze Port drukarki
x1
Złącze Port drukarki
x1
Złącze główkowe otwarcia
I/O
x1
Złącze główkowe wentylatora
Złącze główkowe kasowania
Back Panel
procesora
Złącze główkowe otwarcia
obudowy(opcja)
x1
obudowy(opcja)
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura PS/2
x1
Klawiatura PS/2
x1
Mysz PS/2
x1
Mysz PS/2
x1
Port szeregowy
x1
Port szeregowy
x1
Port VGA
x1
Port VGA
x1
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Gniazdo audio
x6
Gniazdo audio
x6
205 mm (S) X 244 mm (W)
x1
205 mm (S) X 244 mm (W)
Funkcje
NVIDIA nTunes.
NVIDIA nTunes.
specjalne
Obsługa RAID 0 / 1
Obsługa RAID 0 / 1
Obsluga
Windows 2000 / XP
Windows 2000 / XP
systemu
Biostar zastrzega sobie prawo dodawania lub
Biostar zastrzega sobie prawo dodawania lub
operacyjne odwoływania obsługi dowolnego systemu
odwoływania obsługi dowolnego systemu
go
operacyjnego bez powiadomienia.
operacyjnego bez powiadomienia.
45
Motherboard Manual
RUSSIAN
NF61V MICRO AM2
.
CPU
NF61S MICRO AM2
Гнездо AM2
Гнездо AM2
(центральн Процессоры AMD Athlon 64 / Athlon 64 FX /
Процессоры AMD Athlon 64 / Athlon 64 FX /
ый
Althlon 64 X2
Althlon 64 X2
процессор) Поддержка Hyper Transport и Cool’n’Quiet
Поддержка Hyper Transport и Cool’n’Quiet
Поддержка HyperTransport с пропускной
Поддержка HyperTransport с пропускной
способностью до1GГц
способностью до1GГц
MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
Слоты DDR2 DIMM x 2
Слоты DDR2 DIMM x 2
Каждый модуль DIMM поддерживает
Каждый модуль DIMM поддерживает
FSB
Набор
микросхем
Основная
память
Super I/O
Графика
256/512МБ & 1ГБ DDR2
256/512МБ & 1ГБ DDR2
Максимальная ёмкость памяти 2 ГБ
Максимальная ёмкость памяти 2 ГБ
Модуль памяти с двухканальным режимом
Модуль памяти с двухканальным режимом
DDR2
DDR2
Поддержка DDR2 400 / 533 / 667 / 800
Поддержка DDR2 400 / 533 / 667 / 800
ITE 8716F
ITE 8716F
Обеспечивает наиболее используемые
Обеспечивает наиболее используемые
действующие функциональные возможности действующие функциональные возможности
Super I/O.
Super I/O.
Интерфейс с низким количеством выводов
Интерфейс с низким количеством выводов
Встроенная в набор микросхем MCP61V
Встроенная в набор микросхем MCP61S
Максимальная совместно используемая видео Максимальная совместно используемая видео
память составляет 256 МБ
IDE
память составляет 256 МБ
Встроенное устройство управления
Встроенное устройство управления
встроенными интерфейсами устройств
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 / 100 Режим "хозяина" шины Ultra DMA 33 / 66 / 100
/ 133
SATA II
/ 133
Поддержка режима PIO 0~4,
Поддержка режима PIO 0~4,
Встроенное последовательное устройство
Встроенное последовательное устройство
управления ATA
управления ATA
скорость передачи данных до 3 гигабит/с.
скорость передачи данных до 3 гигабит/с.
Соответствие спецификации SATA версия 2.0 Соответствие спецификации SATA версия 2.0
Локальная Realtek 8201CL PHY
сеть
Звуковой
кодек
Слоты
46
Realtek 8201CL PHY
Автоматическое согласование 10 / 100 Мб/с
Автоматическое согласование 10 / 100 Мб/с
ALC861
ALC861
Восьмиканальный звуковой выход
Восьмиканальный звуковой выход
Звуковая поддержка Intel High-Definition
Звуковая поддержка Intel High-Definition
Слот PCI
x2
Слот PCI
x2
Слот PCI Express x16 (x1)
x1
Слот PCI Express x16 (x8)
x1
Слот PCI Express x 1
x1
Слот PCI Express x 1
x1
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
.
NF61S MICRO AM2
Разъём НГМД
x1
Разъём НГМД
x1
Разъём IDE
x1
Разъём IDE
x1
Разъём SATA2
x2
Разъём SATA2
x2
Разъём на лицевой панели
x1
Разъём на лицевой панели
x1
Входной звуковой разъём
x1
Входной звуковой разъём
x1
Разъём ввода для CD
x1
Разъём ввода для CD
x1
Разъём вывода для S/PDIF
x1
Разъём вывода для S/PDIF
x1
Контактирующее приспособление
Контактирующее приспособление
вентилятора центрального процессора x1
Встроенны Контактирующее приспособление
й разъём
вентилятора системы
x2
Открытое контактирующее приспособление
x1
CMOS
x1
USB-разъём
x2
USB-разъём
x2
x1
принтера
Разъём Порт подключения
Шасси открытого контактирующего
средств
ввода-выв
ода
панели
x1
Шасси открытого контактирующего
приспособления(дополнительно)
x1
приспособления(дополнительно)
Разъем питания (24 вывод)
x1
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
Разъем питания (4 вывод)
x1
Клавиатура PS/2
x1
Клавиатура PS/2
x1
Мышь PS/2
x1
Мышь PS/2
x1
Последовательный порт
x1
Последовательный порт
x1
Порт VGA
x1
Порт VGA
x1
Порт LAN
x1
Порт LAN
x1
USB-порт
x4
USB-порт
x4
Гнездо для подключения
наушников
Размер
x2
CMOS
принтера
панель
вентилятора системы
Открытое контактирующее приспособление
Разъём Порт подключения
Задняя
вентилятора центрального процессора x1
Контактирующее приспособление
x1
Гнездо для подключения
x6
205 мм (Ш) X 244 мм (В)
наушников
x6
205 мм (Ш) X 244 мм (В)
Специальн
ые
технически NVIDIA nTunes
NVIDIA nTunes
е
Поддержка RAID 0 / 1
Поддержка RAID 0 / 1
Windows 2000 / XP
Windows 2000 / XP
характерис
тики
Поддержка Biostar сохраняет за собой право добавлять
Biostar сохраняет за собой право добавлять
OS
или удалять средства обеспечения для OS с
или удалять средства обеспечения для OS с
или без предварительного уведомления.
или без предварительного уведомления.
47
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫‪NF61S MICRO AM2‬‬
‫‪NF61V MICRO AM2‬‬
‫‪ AM2‬ﻡﻘﺒﺲ‬
‫‪ AM2‬ﻡﻘﺒﺲ‬
‫وﺣﺪة اﻟﻤﻌ ﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫‪AMD Athlon 64 / Athlon 64 FX / Athlon 64‬ﻡﻌ ﺎﻟﺠﺎت ‪AMD Athlon 64 / Athlon 64 FX / Athlon 64‬ﻡﻌ ﺎﻟﺠﺎت‬
‫‪x2/ Sempron‬‬
‫‪x2/ Sempron‬‬
‫‪ Cool’n’Quiet‬و ‪Hyper Transport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ Cool’n’Quiet‬و ‪Hyper Transport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ‬
‫ﺗﺮدد‪ 1000‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪ HyperTransport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﺗﺮدد‪ 1000‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪ HyperTransport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫)‪MCP61V ( GeForce 6100- 400‬‬
‫)‪MCP61S ( GeForce 6100- 405‬‬
‫ﻋﺪد‪2‬‬
‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬
‫‪ 256/512‬ﺱﻌﺔ‪ DDR2‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع‪ DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫‪Super I/O‬‬
‫ﺏﻄﺎﻗﺔ اﻟﺮﺱﻮﻡﺎت‬
‫‪SATA II‬‬
‫ﺵﺒﻜﺔ دا ﺥﻠﻴﺔ‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﺱﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 2‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR2‬وﺣﺪة ذاآﺮة‬
‫ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR2‬وﺣﺪة ذاآﺮة‬
‫ﺱﻌﺎت‪ DDR2800 / 667 / 533 /400‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﺱﻌﺎت‪ DDR2800 / 667 / 533 /400‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ‬
‫‪ITE 8716F‬‬
‫‪ITE 8716F‬‬
‫اﻷآﺜﺮ اﺱﺘﺨﺪاﻡًﺎ‪ Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫اﻷآﺜﺮ اﺱﺘﺨﺪاﻡًﺎ‪ Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫‪ Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪256‬أﻗﺼﻰ ﺱﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪256‬أﻗﺼﻰ ﺱﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫‪ MCP61V‬ﻡﺪﻡﺠﺔ ﻓﻲ رﻗﺎﺋﻖ‬
‫‪ MCP61S‬ﻡﺪﻡﺠﺔ ﻓﻲ رﻗﺎﺋﻖ‬
‫ﻡﺘﻜﺎﻡﻞ‪ IDE‬ﻡﺘﺤﻜﻢ‬
‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬
‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﻡﺘﻜﺎﻡﻞ‪ Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻡﺘﻜﺎﻡﻞ‪ Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪ 2.0.‬اﻹﺹﺪار‪ SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪ 2.0.‬اﻹﺹﺪار‪ SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪Realtek 8201CL PHY‬‬
‫‪Realtek 8201CL PHY‬‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﻮﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻲ‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﻮﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻲ‬
‫‪ALC861‬‬
‫آﻮدﻳﻚ اﻟﺼﻮت‬
‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬
‫ﺱﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 2‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﻡﺘﻜﺎﻡﻞ‪ IDE‬ﻡﺘﺤﻜﻢ‬
‫ﻡﻨﻔﺬ ‪IDE‬‬
‫ﻋﺪد‪2‬‬
‫‪ 256/512‬ﺱﻌﺔ‪ DDR2‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع‪ DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫‪ALC861‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪8‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪8‬‬
‫‪ Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋ ﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫‪ Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋ ﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪2‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪2‬‬
‫اﻟﻔﺘﺤﺎت‬
‫)‪(x1‬ﻓﺘﺤﺔ ‪PCI Express x16‬‬
‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫)‪(x8‬ﻓﺘﺤﺔ ‪PCI Express x16‬‬
‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺱﻄﺢ‬
‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪ د ‪2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻠﻮﺣﺔ‬
‫‪48‬‬
‫‪NF61V Micro A M2 / NF61S Micro A M2‬‬
‫‪NF61V MICRO AM2‬‬
‫ﻡﻨﻔﺬ ﺥﺮج‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺥﺮج‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪2‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪2‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪2‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫وﺹﻠﺔ ﻓﺘﺢ اﻟﻬﻴﻜﻞ) اﺥﺘﻴﺎري(‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫وﺹﻠﺔ ﻓﺘﺢ اﻟﻬﻴﻜﻞ) اﺥﺘﻴﺎري(‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪ د ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺏﺎﺏﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺏﺎﺏﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪4‬‬
‫ﻋﺪد ‪6‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ‪PS/2‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻡﻨﻔﺬ ‪VGA‬‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪4‬‬
‫ﻋﺪد ‪6‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ‪PS/2‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻡﻨﺎﻓﺬ دﺥﻞ‪ /‬ﺥﺮج اﻟﻠﻮﺣﺔ‬
‫ﻡﻨﻔﺬ ‪VGA‬‬
‫اﻟﺨﻠﻔﻴﺔ‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻡﺰاﻳﺎ ﺥﺎﺹﺔ‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪NVIDIA nTunes‬‬
‫‪NVIDIA nTunes‬‬
‫‪RAID 0 / 1‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ RAID 0 / 1‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ 205‬ﻡﻢ )ﻋﺮض (‪ 244 X‬ﻡﻢ ) ارﺗﻔﺎع(‬
‫‪ 205‬ﻡﻢ )ﻋﺮض (‪ 244 X‬ﻡﻢ ) ارﺗﻔﺎع(‬
‫‪Windows 2000 / XP‬‬
‫‪Windows 2000 / XP‬‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر‪ Biostar‬ﺗﺤﺘﻔﻆ‬
‫أو ﺏﺪون إﺥﻄﺎر‬
‫‪49‬‬
‫‪NF61S MICRO AM2‬‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر‪ Biostar‬ﺗﺤﺘﻔﻆ‬
‫أو ﺏﺪون إﺥﻄﺎر‬
Motherboard Manual
JAPANESE
NF61V MICRO AM2
CPU
NF61S MICRO AM2
Socket AM2
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
Sempron プロセッサ
Sempron プロセッサ
ハイパートランスポートとクールアンドクワイアット ハイパートランスポートとクールアンドクワイアット
をサポートします
FSB
をサポートします
1 GHzのバンド幅までハイパートランスポートをサポ 1 GHzのバンド幅までハイパートランスポートをサポ
ートします
ートします
チップセット MCP61V ( GeForce 6100- 400)
MCP61S ( GeForce 6100- 405)
DDR2 DIMMスロット x 2
DDR2 DIMMスロット x 2
各DIMMは 256/512MB & 1GB DDR2をサポート
各DIMMは 256/512MB & 1GB DDR2をサポート
メインメモリ 最大メモリ容量2GB
最大メモリ容量2GB
デュアル チャンネルモードDDR2メモリモジュール
Super I/O
DDR2 400 / 533 / 667 / 800をサポート
ITE 8716F
ITE 8716F
もっとも一般に使用されるレガシーSuper I/O機能を もっとも一般に使用されるレガシーSuper I/O機能を
採用しています。
採用しています。
低ピンカウントインターフェイス
低ピンカウントインターフェイス
グラフィック MCP61Vチップセットに統合
ス
IDE
SATA II
LAN
サウンド
Codec
スロット
最大の共有ビデオメモリは256MBです
統合IDEコントローラ
統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモード
Ultra DMA 33 / 66 / 100 / 133バスマスタモード
PIO Mode 0~4のサポート、
PIO Mode 0~4のサポート、
統合シリアルATAコントローラ
統合シリアルATAコントローラ
最高3 Gb/秒のデータ転送速度
最高3 Gb/秒のデータ転送速度
SATAバージョン2.0仕様に準拠。
SATAバージョン2.0仕様に準拠。
Realtek 8201CL PHY
Realtek 8201CL PHY
10 / 100 Mb/秒のオートネゴシエーション
10 / 100 Mb/秒のオートネゴシエーション
ALC861
ALC861
8チャンネルオーディオアウト
8チャンネルオーディオアウト
Intelハイデフィニションオーディオのサポート
Intelハイデフィニションオーディオのサポート
PCIスロット
x2
PCIスロット
x2
PCI Express x16スロット (x1)
x1
PCI Express x16スロット (x8)
x1
PCI Express x 1スロット
50
MCP61Sチップセットに統合
最大の共有ビデオメモリは256MBです
オンボードコ フロッピーコネクタ
ネクタ
デュアル チャンネルモードDDR2メモリモジュール
DDR2 400 / 533 / 667 / 800をサポート
x1
PCI Express x 1スロット
x1
x1
フロッピーコネクタ
x1
IDEコネクタ
x1
IDEコネクタ
x1
SATAコネクタ
x2
SATAコネクタ
x2
フロントパネルコネクタ
x1
フロントパネルコネクタ
x1
フロントオーディオコネクタ
x1
フロントオーディオコネクタ
x1
CDインコネクタ
x1
CDインコネクタ
x1
NF61V Micro A M2 / NF61S Micro A M2
NF61V MICRO AM2
背面パネル
I/O
S/PDIFアウトコネクタ
x1
S/PDIFアウトコネクタ
x1
CPUファンヘッダ
システムファンヘッダ
x1
CPUファンヘッダ
x1
x2
システムファンヘッダ
x2
CMOSクリアヘッダ
x1
CMOSクリアヘッダ
x1
USBコネクタ
x2
USBコネクタ
x2
プリンタポートコネクタ
x1
プリンタポートコネクタ
x1
シャーシオープンヘッダ(オプション)
x1
シャーシオープンヘッダ(オプション)
x1
電源コネクタ(24ピン)
x1
電源コネクタ(24ピン)
x1
電源コネクタ(4ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード
x1
PS/2キーボード
x1
PS/2マウス
x1
PS/2マウス
x1
シリアルポート
x1
シリアルポート
x1
VGAポート
x1
VGAポート
x1
LANポート
x1
LANポート
x1
USBポート
x4
USBポート
x4
オーディオジャック
x6
オーディオジャック
x6
ボードサイズ 205 mm (幅) X 244 mm (高さ)
特殊機能
NF61S MICRO AM2
NVIDIA nTunes
205 mm (幅) X 244 mm (高さ)
NVIDIA nTunes
RAID 0 / 1 のサポート
RAID 0 / 1 のサポート
Windows 2000 / XP
Windows 2000 / XP
OSサポート Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。
たは削除する権利を留保します。
2006/09/19
51
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Table of Contents
BIOS Setup ................................................................................................ 2
1 Main Menu ............................................................................................. 4
2 Standard CMOS Features..................................................................... 7
3 Advanced BIOS Features ...................................................................... 9
4 Advanced Chipset Features................................................................. 15
5 Integrated Peripherals......................................................................... 17
6 Power Management Setup .................................................................. 23
7 PnP/PCI Configurations...................................................................... 27
8 PC Health Status .................................................................................. 29
9 Performance Booster Zone.................................................................. 31
1
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
BIOS Setup
Introduction
The purpose of this manual is to describe the settings in the Award™ BIOS
Setup program on this motherboard. The Setup program allows users to modify
the basic system configuration and save these settings to CMOS RAM. The
power of CMOS RAM is supplied by a battery so that it retains the Setup
information when the power is turned off.
Basic Input-Output System (BIOS) determines what a computer can do without
accessing programs from a disk. This system controls most of the input and
output devices such as keyboard, mouse, serial ports and disk drives. BIOS
activates at the first stage of the booting process, loading and executing the
operating system. Some additional features, such as virus and password
protection or chipset fine-tuning options are also included in BIOS.
The rest of this manual will to guide you through the options and settings in
BIOS Setup.
Plug and Play Support
This AWARD BIOS supports the Plug and Play Version 1.0A specification and
ESCD (Extended System Configuration Data) write.
EPA Green PC Support
This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.
APM Support
This AWARD BIOS supports Version 1.1&1.2 of the Advanced Power
Management (APM) specification. Power management features are
implemented via the System Management Interrupt (SMI). Sleep and Suspend
power management modes are supported. Power to the hard disk drives and
video monitors can also be managed by this AWARD BIOS.
ACPI Support
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power
interface specification (ACPI). It provides ASL code for power management
and device configuration capabilities as defined in the ACPI specification,
developed by Microsoft, Intel and Toshiba.
2
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
PCI Bus Support
This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral
Component Interconnect) local bus specification.
DRAM Support
DDR SDRAM (Double Data Rate Synchronous DRAM) is supported.
Supported CPUs
This AWARD BIOS supports the AMD CPU.
Using Setup
Use the arrow keys to highlight items in most of the place, press <Enter> to
select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help
and press <Esc> to quit. The following table provides more detail about how to
navigate in the Setup program by using the keyboard.
Keystroke
Up arrow
Down arrow
Left arrow
Right arrow
Move Enter
PgUp key
PgDn key
+ Key
- Key
Esc key
F1 key
F5 key
F7 key
F10 key
Function
Move to previous item
Move to next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Move to the item you desired
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the optimized defaults
Save all the CMOS changes and exit
3
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
1 Main Menu
Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will
appear on the screen. The Main Menu allows you to select from several setup
functions. Use the arrow keys to select among the items and press <Enter> to
accept and enter the sub-menu.
!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described in
this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your
reference only. The actual BIOS information and settings on
board may be slightly different from this manual.
„ Figure 1: Main Menu
Standard CMOS Features
This submenu contains industry standard configurable options.
Advanced BIOS Features
This submenu allows you to configure advanced features of the BIOS.
4
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Advanced Chipset Features
This submenu allows you to configure special chipset features.
Integrated Peripherals
This submenu allows you to configure certain IDE hard drive options and
Programmed Input/ Output features.
Power Management Setup
This submenu allows you to configure the power management features.
PnP/PCI Configurations
This submenu allows you to configure certain “Plug and Play” and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Performance Booster Zone
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.
(However, we suggest you to use the default setting. Changing the voltage and
clock improperly may damage the CPU or M/B!)
Load Optimized Defaults
This selection allows you to reload the BIOS when problem occurs during
system booting sequence. These configurations are factory settings optimized
for this system. A confirmation message will be displayed before defaults are
set.
5
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor
from making changes using the CMOS Setup Utility. You will be prompted with
to enter a password.
Set User Password
If the Supervisor Password is not set, then the User Password will function in
the same way as the Supervisor Password. If the Supervisor Password is set and
the User Password is set, the “User” will only be able to view configurations but
will not be able to change them.
Save & Exit Setup
Save all configuration changes to CMOS (memory) and exit setup. Confirmation
message will be displayed before proceeding.
Exit Without Saving
Abandon all changes made during the current session and exit setup.
Confirmation message will be displayed before proceeding.
Upgrade BIOS
This submenu allows you to upgrade bios.
6
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
2 Standard CMOS Features
The items in Standard CMOS Setup Menu are divided into several categories.
Each category includes no, one or more than one setup items. Use the arrow
keys to highlight the item and then use the<PgUp> or <PgDn> keys to select the
value you want in each item.
„ Figure 2: Standard CMOS Setup
Main Menu Selections
This table shows the items and the available options on the Main Menu.
Item
Options
Description
Date
mm : dd : yy
Set the system date. Note
that the ‘Day’ automatically
changes when you set the
date.
Time
hh : mm : ss
Set the system internal
clock.
IDE Channel 0 Master
Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options
IDE Channel 0 Slave
Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options.
Drive A
360K, 5.25 in
Select the type of floppy
disk drive installed in your
7
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Item
Drive B
Options
1.2M, 5.25 in
Description
system.
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
None
EGA/VGA
Video
CGA 40
CGA 80
Select the default video
device.
MONO
All Errors
No Errors
Halt On
All, but Keyboard
All, but Diskette
Select the situation in which
you want the BIOS to stop
the POST process and
notify you.
All, but Disk/ Key
Base Memory
N/A
Displays the amount of
conventional memory
detected during boot up.
Extended Memory
N/A
Displays the amount of
extended memory detected
during boot up.
Total Memory
N/A
Displays the total memory
available in the system.
8
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
3 Advanced BIOS Features
„ Figure 3: Advanced BIOS Setup
Cache Setup
9
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
CPU Internal Cache
Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
Enabled (default) Enable cache.
Disabled
Disable cache.
External Cache
This option enables or disables “Level 2” secondary cache on the CPU, which
may improve performance.
Enabled (default) Enable cache.
Disabled
Disable cache.
Boot Seq & Floppy Setup
This item allows you to setup boot sequence & Floppy.
10
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Removable Device Priority
Select Removable Boot Device Priority.
The Choices: Floppy Disks, Zip100, USB-FDD0, USB-FDD1, USB-ZIP0,
USB-ZIP1, LS120.
Hard Disk Boot Priority
The BIOS will attempt to arrange the Hard Disk boot sequence
automatically.You can change the Hard Disk booting sequence here.
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0,
USB HDD1, USB HDD2, and Bootable Add-in Cards.
11
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
CD-ROM Boot Priority
TheChoices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB-CDROM0,
USB-CDROM1.
First/Second/Third Boot Device
The BIOS will attempt to load the operating system in this order.
The Choices: Removable, Hard Disk, CDROM, Legacy LAN, Disabled.
Boot Other Device
When enabled, BIOS will try to load the operating system from other device
when it failed to load from the three devices above.
The Choices: Enabled (default), Disabled
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical
drive assignments.
The Choices: Disabled (default), Enabled.
Boot Up Floppy Seek
When enabled, System will test the floppy drives to determine if they have 40
or 80 tracks during boot up. Disabling this option reduces the time it takes to
boot-up.
The Choices: Enabled (default), Disabled.
12
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Virus Warning
This option allows you to choose the VIRUS Warning feature that is used to
protect the IDE Hard Disk boot sector. If this function is enabled and an attempt
is made to write to the boot sector, BIOS will display a warning message on the
screen and sound an alarm beep.
Disabled (default) Virus protection is disabled.
Enabled
Virus protection is activated.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Disabled
Normal POST.
Enabled (default) Enable quick POST.
Boot Up NumLock Status
Selects the NumLock State after the system switched on.
The Choices:
On (default)
Numpad is number keys.
Off
Numpad is arrow keys.
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal A pin in the keyboard controller controls GateA20.
Fast (default) Lets chipset control Gate A20.
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can
be configured.
The Choices: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke.
The Choices: 250 (default), 500, 750, 1000.
13
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Security Option
This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System:
A password is required for the system to boot and is also
required to access the Setup Utility.
Setup (default):
A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
APIC MODE
Selecting Enabled enables APIC device mode reporting from the BIOS to the
operating system.
The Choices: Enabled (default), Disabled.
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.
Small Logo(EPA) Show
This item allows you to select whether the “Small Logo” shows. Enabled
(default) “Small Logo” shows when system boots up. Disabled No “Small
Logo” shows when system boots
The Choices: Enabled (default), Disabled
Summary Screen Show
This item allows you to enable/disable the summary screen. Summary screen
means system configuration and PCI device listing.
The Choices: Disabled (default), Enabled.
14
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
4 Advanced Chipset Features
This submenu allows you to configure the specific features of the chipset
installed on your system. This chipset manage bus speeds and access to system
memory resources, such as DRAM. It also coordinates communications with the
PCI bus. The default settings that came with your system have been optimized
and therefore should not be changed unless you are suspicious that the settings
have been changed incorrectly.
„ Figure 4: Advanced Chipset Setup
Frame Buffer Size
This item allows you to choose the frame buffer size of on-chip VGA.
The Choices: 64MB (default), 16MB, 32MB,128MB,256MB,Disabled.
GPU Bank Filp
The Choices: Disabled (default), Enabled.
15
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
PMU
This item allows you to enable or disable the PMU function.
The Choices: Disabled (default), Auto.
K8<->NB HT Speed
This item allows you to select the K8<->NB HT Speed.
The Choices: Auto (default), 1x, 2x, 3x, 4x, 5x.
K8<->NB HT Width
This item allows you to select the K8<->NB HT Width
The Choices:,Auto (default),[↓8 ↑8], [↓16 ↑16].
SATA /PCIE Spread Spectrum
This item allows you to enable/disable the Spread Spectrum function.
The Choices: Disabled (default), Enabled.
HT Spread Spectrum
This item allows you to select HT Spread Spectrum function.
The choices: Disabled (default), Center, Down.
SSE/SSE2 instruction
This item allows you to enable/disable SSE/SSE2 instruction.
The Choices: Enabled (default), Disabled.
System BIOS Cacheable
Selecting the “Enabled” option allows caching of the system BIOS ROM at
F0000h-FFFFFh, which is able to improve the system performance. However,
any programs that attempts to write to this memory block will cause conflicts
and result in system errors.
The Choices: Disabled (default), Enabled.
16
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
5 Integrated Peripherals
„ Figure 5. Integrated Peripherals
IDE Function Setup
Highlight the “Press Enter” label next to the “VIA OnChip IDE Device”
label and press enter key will take you a submenu with the following options:
17
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
RAID Config
RAID Enable
This option allows you to enable or disable RAID function.
The Choices: Disabled (default), Enabled.
SATA 1/2 Primary/Secondary RAID
This option allows you to enable or disable SATA A Primary/Secondary RAID.
The Choices: Disabled (default), Enabled.
On-chip IDE Channel 0
The motherboard chipset contains a PCI IDE interface with support for two
IDE channels. Select “Enabled” to activate the first and/or second IDE interface.
Select “Disabled” to deactivate an interface if you are going to install a primary
and/or secondary add-in IDE interface.
The Choices: Enabled (default), Disabled.
Primary Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4)
for each of the IDE devices that the onboard IDE interface supports. Modes 0
to 4 will increase performance progressively. In Auto mode, the system
automatically determines the best mode for each device.
The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.
18
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Primary Master/Slave UDMA
Ultra DMA function can be implemented if it is supported by the IDE hard
drives in your system. As well, your operating environment requires a DMA
driver (Windows 95 or OSR2may need a third party IDE bus master driver). If
your hard drive and your system software both support Ultra DMA, select Auto
to enable BIOS support.
The Choices: Auto (default), Disabled.
IDE DMA Transfer Access
This item allows you to enable or disable the IDE DMA transfer access.
The Choices: Enabled (default), Disabled.
Serial-ATA Controller
Enables support for Serial-ATA controller.
The Choices: All Enabled (default), Disabled,SATA-1,SATA-2
IDE Prefetch Mode
The “onboard” IDE drive interfaces supports IDE prefetch function for faster
drive access. If the interface on your drive does not support prefetching, or if
you install a primary and/or secondary add-in IDE interface, set this option to
“Disabled”.
The Choices: Enabled (default), Disabled.
19
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Onboard Device
Highlight the “Press Enter” label next to the “VIA OnChip PCI Device” label
and press the enter key will take you a submenu with the following options:
USB Memory Type
The item allows you select the type of USB Memory.
The Choices: SHADOW (default), Base Memory(640K).
USB Keyboard/ Storage Support
This item allows you to support the USB legacy devices.
The Choices: Enabled, Disabled (default).
USB Mouse Support
This item allows you to enable or disable the USB Mouse Legacy Support.
Enabled
Enable USB Mouse Support.
Disabled (default) Disable USB Mouse Support.
HD Audio
This item allows you to enable or disable to support HD Audio.
The Choices: Auto (default), Disabled.
20
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
MAC LAN
This option allows you to control the onboard MAC LAN.
The Choices: Auto (default), Disabled.
MAC Media Interface
This option allows you to control the onboard MAC Media Interface.
The Choices: Pin Strap (default), MII,RGMII
Onboard LAN Boot ROM
This item allows you to enable or disable the Onboard LAN Boot ROM.
The Choices: Disabled (default), Enabled.
Onboard I/O Address
Press Enter to configure the Onboard I/O Address.
Onboard FDC Controller
Select enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you installed another FDC or the
system uses no floppy drive, select disabled in this field.
The Choices: Enabled (default), Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial
ports.
The Choices: 3F8/IRQ4 (default), Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
Auto.
21
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O Address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
This item allows you to determine how the parallel port should function. The
default value is SPP.
The Choices:
SPP (default)
Using Parallel port as Standard Printer Port.
EPP
Using Parallel Port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
Onboard GPU
This item allows you to control the Onboard GPU.
The Choices: Auto (default), Always Enable.
Init Display First
With systems that have multiple video cards, this item determines whether the
primary display uses a PCI Slot or an AGP Slot.
The Choices: PCI-Express (default),PCI Slot, Onboard.
OnChip USB
This option should be enabled if your system has a USB installed on the system
board. You may need to disable this feature if you add a higher performance
controller.
The Choices: V1.1+V2.0 (default), Disabled, V1.1
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sectors read / write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block mode (most new drives do), select Enabled for automatic detection of the
optimal number of block read / write per sector where the drive can support.
The Choices: Enabled (default), Disabled.
22
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
6 Power Management Setup
The Power Management Setup Menu allows you to configure your system to
utilize energy conservation and power up/power down features.
„ Figure 6. Power Management Setup
ACPI Function
This item displays the status of the Advanced Configuration and Power
Management (ACPI).
The Choices: Enabled (default), Disabled.
ACPI Suspend Type
The item allows you to select the suspend type under the ACPI operating
system.
The Choices:
S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS+STR
23
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Power Management
This category allows you to select the power saving method and is directly
related to the following modes:
1. HDD Power Down.
2. Suspend Mode.
There are three options of Power Management, three of which have fixed mode
settings
Min. Power Saving
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max. Power Saving
Maximum power management only available for sl CPU’s.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Define (default)
Allow you to set each option individually.
When you choose user define, you can adjust each of the item from 1 min. to 1
hr. except for HDD Power Down which ranges from 1 min. to 15 min.
Video Off Method
This option determines the manner when the monitor goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS (default)
Initial display power management signaling.
HDD Power Down
When enabled, the hard-disk drives will power down after a set time of system
inactivity. All other devices remain active.
The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7
Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min.
24
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Soft-Off by PWR-BTN
This item determines the behavior of system power button. Instant off turn off
the power immediately, and Delay 4 Sec. will require you to press and hold the
power button for 4 seconds to cut off the system power.
The Choices: Delay 4 Sec, Instant-Off (default).
WOL(PME#)/ From Soft-Off
This item allows you to enable or disable Wake On LAN from Soft-Off
function.
The Choices: Disabled (default), Enabled.
WOR(RI#) From Soft-Off
This item allows you to enable or disable Wake On Ring from Soft-Off function.
The Choices: Disabled (default), Enabled.
USB Resume from S3/S4
This item allows you to enable or disabled the USB device wake up from S3/S4
function.
The Choices: Disabled (default), Enabled.
Power-On by Alarm
This function is for setting date and time for your computer to boot up. When
enabled, you can choose the date and time to boot up the system.
The Choices: Disabled (default), Enabled.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose the system boot up time, input hour, minute and second to
specify.
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this function will work.
HPET Support
The Choices: Enabled (default), Disabled.
POWER ON Function
This item allows you to choose the power on method.
The Choices: Button Only (default), Password, Hot Key, Mouse Move/Click,
25
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Mouse Double Click, Any Key, Keyboard 98.
KB Power ON Password
Input password and press Enter to set the Keyboard power on password.
Hot Key Power ON
Choose the Hot Key combination to boot up the system.
The Choices: Ctrl-F1(default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6,
Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, and Ctrl-F12.
POWER After PWR-Fail
This setting specifies how your system should behave after a power fail or
interrupts occurs. By choosing off will leave the computer in the power off state.
Choosing On will reboot the computer. Former-Sts will restore the system to the
status before power failure or interrupt occurs.
The Choices: Off (default), On, Former-Sts.
26
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of the CPU itself uses when communicating with its
own special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to
the default settings.
„ Figure 7: PnP/PCI Configurations
Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to record
which resources are assigned and protects resources from conflict.
Every peripheral device has a node, which is called ESCD. This node records
which resources are assigned to it. The system needs to record and update ESCD
to the memory locations. These locations are reserved in the system BIOS. If the
Disabled (default) option is chosen, the system‘s ESCD will update only when
the new configuration varies from the last one. If the Enabled option is chosen,
the system is forced to update ESCDs and then is automatically set to the
“Disabled” mode.
The above settings will be shown on the screen only if “Manual” is chosen for
the resources controlled by function.
27
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Legacy is the term, which signifies that a resource is assigned to the ISA Bus
and provides non-PnP ISA add-on cards. PCI / ISA PnP signify that a resource
is assigned to the PCI Bus or provides for ISA PnP add-on cards and
peripherals.
The Choices: Disabled (default), Enabled.
Resources Controlled By
By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral. By Choosing “Manual”, the user will need to assign IRQ & DMA for
add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
The Choices: Auto (ESCD) (default), Manual.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending
on the type of device using the interrupt. When you press the “Press Enter” tag,
you will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when “Resources Controlled By” is set to
“Manual”.
IRQ-3
assigned to PCI Device
IRQ-4
assigned to PCI Device
IRQ-5
assigned to PCI Device
IRQ-7
assigned to PCI Device
IRQ-9
assigned to PCI Device
IRQ-10
assigned to PCI Device
IRQ-11
assigned to PCI Device
IRQ-12
assigned to PCI Device
IRQ-14
assigned to PCI Device
IRQ-15
assigned to PCI Device
PCI / VGA Palette Snoop
Some old graphic controllers need to “snoop” on the VGA palette and then map
it to their display as a way to provide boot information and VGA compatibility.
This item allows such snooping to take place.
The Choices: Disabled (default), Enabled.
Maximum Payload Size
Set the maximum payload size for Transaction packets (TLP).
The Choice: 4096 (default.), 128, 256, 512, 1024, 2048.
28
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
8 PC Health Status
„ Figure 8: PC Health Status
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item is
only effective under Windows 98 ACPI mode.
The Choices: Disabled (default) , 70℃/ 158℉, 65℃/ 149℉, 60℃/ 140℉.
Show H/W Monitor in POST
If you computer contains a monitoring system, it will show PC health status
during POST stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.
CPU Vcore, Chipset Volt,HT/DDR Voltage, +3.3V, +5.0V,
+12.0V, 5V (SB), Voltage Battery
Detect the system’s voltage status automatically.
CPU Temp
This field displays the current temperature of CPU.
29
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Current CPU FAN Speed
This field displays the current speed of CPU fan.
Current SYS FAN Speed
This field displays the current speed SYSTEM fan.
30
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
9 Performance Booster Zone
„ Figure 9: Performance Booster Zone
CPU Spec Voltage
This item allows you to select CPU Spec Voltage .
The Choices: Auto (default).
Memory Spec Voltage
This item allows you to select memory Spec Voltage .
The Choices: 1.950v (default).
NPT Vid control
This function allows you to adjust the CPU voltage.
The Choices: Auto (default), 0.3875V ~ 1.725V (differs from CPU)
Memory Voltage
This item allows you to select memory Voltage.
The Choices: 1.950V (default), 2.000V, 2.050V, 2.100V.
31
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
NPT Fid control
This function allows you to adjust the frequency ratio of CPU.
The Choices: Auto (default), x4: 800Mhz ~ x25: 5000Mhz
(differs from CPU)
CPU Frequency
This item allows you to select the CPU Frequency.
The Choices: 200 (default).
Min= 200
Max= 450
Key in a DEC number.
PCIE Clock
The Choices: 100MHz (default), 101MHz ~ 150MHz
Onboard GPU over clock
This item allows you to select the GPU over clock.
The Choices: 425 (default).
Min= 100
Max= 1000
Key in a DEC number.
DRAM Configuration
32
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Memory Timings
tCL(CAS Latency)
The Choices: Auto (default), 3 clock ~ 6 clock.
tRCD
The Choices: Auto (default), 3 clock ~ 6 clock.
tRP
The Choices: Auto (default), 3 clock ~ 6 clock.
tRAS
The Choices: Auto (default), 5 clock ~ 18 clock.
Command Per Clock (CMD)
The Choices: Auto (default), 1 clock ~ 2 clock.
tRRD
The Choices: Auto (default), 2 clock ~ 5 clock.
AsyncLat
The Choices: Auto (default), 1ns ~ 15ns.
tRC
The Choices: Auto (default), 11 clock ~ 26 clock.
tWR
The Choices: Auto (default), 3 clock ~ 6 clock.
33
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
tRWT
The Choices: Auto (default), 2 clock ~ 9 clock.
tWTR
The Choices: Auto (default), 1 clock ~ 3 clock.
tREF
The Choices: Auto (default), 7.8 us, 3.9 us.
Read DQS Skew
The Choices: Auto (default), -10/96 clock ~ +10/96 clock.
Read delay from Rx FIFO
The Choices: Auto (default), 0.5 clock ~ 4.0 clock.
Trfc0 for DIMM0
The Choices: Auto (default), 75ns, 105ns, 127.5ns, 195ns, 327.5ns.
Trfc2 for DIMM2
The Choices: Auto (default), 75ns, 105ns, 127.5ns, 195ns, 327.5ns.
Drive Strength setting
Dram driver weak mode
The Choices: Auto (default), Normal, Weak.
CKE drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
34
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
CS drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
MA drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
MCLK drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
MD drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
DQS drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
Dram on-die Terminator
The Choices: Auto (default), Disable, 75ohm, 150ohm, 50ohm.
Read/Write Queue bypass
The Choices: Auto (default), 2 times, 4 times, 8 times, 16 times.
Bypass Maximum
The Choices: Auto (default), No bypass, 1 time ~ 15 time.
32 Byte Granularity
The Choices: Auto (default), 64-byte, 32-byte.
Timing Mode
The Choices: Auto (default), MaxMemClk.
Memory Clock value or Limit
The Choices: DDR 400 (default), DDR 533, DDR 667, DDR 800.
DQS Training Control
The Choices: Skip DQS (default), Perform DQS.
CKE base power down mode
The Choices: Disabled (default), Enabled.
CKE base powerdown
The Choices: Per Channel (default), Per CS.
Memclock tri-stating
The Choices: Disabled (default), Enabled.
35
NF61V Micro AM2 / NF61S Micro AM2
BIOS Setup
Memory Hole Remapping
The Choices: Enabled (default), Disabled.
Auto Optimize Bottom IO
The Choices: Enabled (default), Disabled.
Bottom of [31:24] IO space
The Choices: Min=0000
Max=00FF; Key in a HEX number.
Bottom of UMA DRAM [31:24]
The Choices: Min=0000
Max=00FC; Key in a HEX number.
Special Notice:
If the system’s frequency that you are selected is not functioning, there are two methods
of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON” status. All the
CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that keep-on pressing the
<Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.
36
Download PDF