Advantech | FPM-3150TVE Series | Adjusting FPM Screen Justification

Products:
FPM-2150G-R , FPM-3120G-XA , FPM-3120G , FPM-3150TVE-T , FPM-2150GA-R , FPM-3150G-XBE ,
FPM-3120G-RA , FPM-3150G-RBE , FPM-3150G , FPM-2150G , FPM-3150TVE , FPM-2150GA ,
Abstract:
Adjusting FPM Screen Justification
Why does the screen shift to the left? How can I adjust it back to the right?
Description:
Sometimes you will see the screen shift like this:
Solution:
The root cause was that the Auto button was pressed during DOS or Windows boot
up screen and FPM can’t get the correct property settings from DOS / Windows boot
up screen. Both the DOS screen and Windows boot up screen use 640x480 60 Hz
setting. If you can’t get the correct resolution setting, the screen will shift when using
640x480 60 Hz.
Page
1
Please follow the steps as below to make it back to right location:
1. Enter to Windows OS. In this case, the current setting is 1024x768 60Hz:
2. Right click mouse at desktop and select “Advanced” item:
Page
2
3. Select the “List All modes” item
4. There are three 640x480 60 Hz modes. Select one of them.
Page
3
5. After applying, you can get 640x480 60Hz resolution like this:
6. Press Auto button.
7. Reboot the system then you can find the DOS and Windows boot up screen show
normally.
8. How to avoid this problem happen again? Please don’t press the Auto button at
DOS or Windows Boot up screen.
Page
4
Download PDF