TOA F-2000B, F-2000WTWP, HY-CM20W, HY-CM20B, F-2000BTWP, HY-CL20B, F-2000BT, F-2000WT, F-2000W Specification

TOA F-2000B, F-2000WTWP, HY-CM20W, HY-CM20B, F-2000BTWP, HY-CL20B, F-2000BT, F-2000WT, F-2000W Specification
F-2000 Series
Wide-Dispersion Speakers
Without Horn Adapter (110 × 100-deg Octagon Horn)
Horizontal 110°
With Horn Adapter (80 × 80-deg Octagon Horn)
Horizontal 80°
F-2000B/BT/BTWP
F-2000W/WT/WTWP
DESCRIPTION
The TOA F-2000 Series comprise a two-way speaker line of compact units offering wide frequency response and higher, more
powerful performance. These highly adaptable speaker systems are intended to meet the requirements of a wide range of venues
and applications, both indoors and outdoors.
For clear, wide-area sound coverage, the Series include wide dispersion-angle (110° × 100°) high-frequency horns (Octagonal
Horn), plus an easily-added 80° × 80° dispersion angle horn adapter for tighter dispersion control. Both high-impedance and lowimpedance models are available. Low impedance models come with separate HF and LF protection circuitry. High impedance
models have a rear-panel rotary control for making impedance settings that optimally match amplifier and speaker performance.
The speaker units have a design that combines stylishness and a high degree of performance-enhancing rigidity. Even the decorenhancing convex bulge on the side of the casing serves to improve rigidity. Brackets for easy speaker-stand, wall and ceiling
installation are included, and there are also optionally available brackets for more challenging installation venues and sound
reinforcement applications. Push-in terminals make connections quick and easy, and there are models for outdoor use that meet
IPX4 splash-proof standards.
FEATURES
• 110° × 100° dispersion angle high-frequency horns (Octagonal Horn) ensure an enhanced sound coverage area and a more
even balanced tone.
• Easily-mountable 80° × 80° dispersion angle horn adapter for increased dispersion control.
• Splash-proof design with anticorrosive punching net and terminal cover, meeting IPX4 splash-proof ratings, available on models
F-2000BTWP/WTWP.
• All speaker models are repaintable.
• Low impedance models have high and low frequency filter and protection circuitry.
• Included accessory brackets allow a wide choice of installations on walls, ceilings and speaker stands.
• Optionally available brackets meet an even wider variety of installation demands.
• Stylish and highly rigid casing design for attractive installation with clearer sound reproduction.
• Sensitivity: 92dB (1W, 1m) (without horn adapter)/93dB (1W, 1m) (with horn adapter)
TOA Corporation F-2000 1/4
APPEARANCE AND DIMENSIONAL DIAGRAM
235 (9.25")
244 (9.61")
TERMINAL COVER USE (F-2000BTWP/WTWP only)
6–M5 (depth 14 (0.55"))
(for bracket mounting)
50 (1.97")
Input terminal
Tapping screw 4 x 12 (accessory)
373 (14.69")
50 (1.97")
76.2 (3")
Terminal cover (accessory)
Speaker cable
.89")
48 (1
.97")
50 (1
Front View
Rotally switch
* Screwed onto the Terminal cover at the factory.
30mm
Rear View (F-2000BT/WT/
Side View
BTWP/WTWP only)
Notes
• For the speaker cable, use a cable with a diameter of 6 – 10 mm, which will fit the cable
bushing.
2–M5 (depth 14 (0.55"))*
(for bracket mounting)
Bottom View
[Stripped conductor]
10mm
Bushing*
• To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and
tighten the bushing on the cover.
*Hole plugs are pre-fitted into
the holes at the factory.
Before attaching the speaker
mounting bracket to this side,
remove them using a pointed
tool.
WALL BRACKET AND JOINT BRACKET MOUNTING (ACCESSORY BRACKETS)
Vertical installation
Horizontal: Max. 70°,
Vertical: Max. 45° downward
Horizontal installation
Horizontal: Max. 45°,
Vertical: Max. 45° downward
Joint bracket mounting
Hexagon bolt M6 x 12
(with plain washer
and spring washer)
Wall bracket
Horizontal speaker
mounting (indoor
installation only)
4-ø6mm
45mm
Wall bracket mounting
Joint bracket
45mm
Joint bracket
Fixing bolt
M6 x 85
Fixing bolt M6 x 85
4-ø6mm
45mm
Speaker bracket
45mm
SPECIFICATIONS
Model No.
Enclosure Type
Power Handling Capacity
F-2000B
Rated Input
Rated Impedance
60 W
100V line: 170Ω (60W), 330 Ω (30W), 670 Ω (15W), 3.3 kΩ (3W)
70V line: 83Ω (60W), 170Ω (30W), 330 Ω (15W), 670 Ω (7.5W), 3.3 kΩ (1.5W)
92 dB (1W, 1m) at installation in 1/2 free sound field
93 dB (1W, 1m) at installation in 1/2 free sound field (with horn adapter)
65 - 20,000 Hz, -10 dB at installation in 1/2 free sound field
2.5 kHz
Horizontal: 110º, Vertical: 100º
Horizontal: 80º, Vertical: 80º (with horn adapter)
Low frequency: 20 cm (8") cone-type
High frequency: 25 mm (1") dome tweeter
Push-in terminal
—
IPX4
—
–10°C to +50°C (14°F to 122°F)
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
steel plate, black, anticorrosive paint steel plate, white, anticorrosive paint
steel plate, black, paint
steel plate, white, paint
steel plate, black, paint
steel plate, white, paint
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Steel plate, t2.0, black, paint
Steel plate, t2.0, white paint
Steel plate, t2.0, black, paint
Steel plate, t2.0, white, paint
Stainless steel (SUS304), t2.0
Stainless steel (SUS304), t2.0
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
aluminum, black, paint
aluminum, white, paint
aluminum, black, paint
aluminum, white, paint
aluminum, black, paint
aluminum, white, paint
244 (W) × 373 (H) × 235 (D) mm (9.61" × 14.69" × 9.25")
6.5 kg (14.33 lb) (including the supplied brackets)
7.4 kg (16.31lb) (including the supplied brackets)
Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1,
Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1,
Bracket fixing screw × 1 set,
Bracket fixing screw × 1 set,
Horn adapter x 1, Horn adapter mounting screw x 4
Horn adapter x 1, Horn adapter mounting screw x 4,
Terminal cover x 1,Terminal cover mounting screw × 4
Ceiling mount bracket: HY-CM20B Ceiling mount bracket: HY-CM20W Ceiling mount bracket: HY-CM20B Ceiling mount bracket: HY-CM20W
Speaker mount bracket: SP-131, YS-60B
Cluster bracket: HY-CL20B
Cluster bracket: HY-CL20B
Cluster bracket: HY-CL20B
Cluster bracket: HY-CL20B
FB-100, FB-120B/W
Sensitivity
Frequency Response
Crossover Frequency
Directivity Angle
Speaker Component
Input Terminal
Water Protection
Operating Temperature
Finish
Dimensions
Weight
Accessories
Options
Recommended Subwoofer
F-2000W
60 W (continuous pink noise)
180 W (continuous program)
—
8Ω
F-2000BT
F-2000WT
Bass-reflex type
F-2000BTWP*
F-2000WTWP*
—
* Note: Do not install the speaker at places where it is likely to be corroded such as bathroom, indoor pools or seaside.
TOA Corporation F-2000 2/4
CHARACTERISTIC DIAGRAMS
• without HF Horn Adapter
Polar Response
0°
10
330°
60°
0°
10
330°
30°
0
30°
0
-10
-10
300°
-20
60°
300°
-20
-30
-40
270°
-40
-40
-30
-30
-30
240°
-20
120°
-10
0
10
180°
240°
150°
1000Hz
800Hz
630Hz
10
180°
500Hz
400Hz
315Hz
30°
0
60°
60°
300°
-20
60°
300°
-20
-30
-40
-40
270°
90°
-40
-40
-30
-30
-30
240°
-20
120°
-10
0
2000Hz
1600Hz
1250Hz
10
180°
330°
150°
-20
120°
240°
0
150°
30°
0
60°
330°
330°
30°
0
0
-10
300°
-20
60°
-30
-30
-30
-30
-40
-40
-40
-40
-40
270°
270°
270°
270°
90°
90°
90°
270°
90°
-40
-40
-40
-40
-40
-40
-30
-30
-30
-30
-30
-30
-20
240°
-20
120°
240°
-20
120°
-10
-10
-10
0
0
0
240°
10
180°
150°
150°
240°
10
180°
4000Hz
3150Hz
2500Hz
240°
10
180°
8000Hz
6300Hz
5000Hz
SPL vs. Frequency
-20
120°
240°
150°
16000Hz
12500Hz
10000Hz
240°
-20
120°
240°
-20
120°
-10
-10
-10
0
0
0
240°
10
180°
300°
-20
-30
90°
2000Hz
1600Hz
1250Hz
0°
10
-10
300°
-20
240°
10
180°
1000Hz
800Hz
630Hz
0°
10
-10
240°
-10
0
10
180°
500Hz
400Hz
315Hz
330°
30°
60°
240°
-10
240°
0°
10
0
270°
90°
-40
-20
150°
300°
-20
-30
-40
270°
300°
60°
-30
90°
120°
0
-10
-40
270°
150°
240°
10
180°
4000Hz
3150Hz
2500Hz
Phase vs. Frequency
150°
240°
240°
10
180°
8000Hz
6300Hz
5000Hz
16000Hz
12500Hz
10000Hz
Beamwidth vs. Frequency
180
110
100
80
70
200
0
Beamwidth (deg)
Phase (deg)
90
90
SPL (dB)
300°
330°
30°
-10
-20
240°
-20
0°
10
330°
0
-30
90°
150°
60°
-10
-10
300°
30°
-10
240°
0
10
180°
330°
30°
0
-20
0°
10
330°
0
0°
10
0°
10
-10
120°
-20
120°
0°
10
30°
-10
0
150°
330°
30°
240°
-10
240°
0°
10
60°
270°
90°
-40
-20
300°
-20
-40
90°
150°
60°
-30
-40
270°
120°
330°
0
-10
-30
90°
vertical
horizontal
0°
10
30°
-90
60
-180
20
50
50
100
500
1k
5k
10k
20k
Frequency (Hz)
40
100
50
Impedance vs. Frequency
30
20
50
100
500
1k
5k
10k
200
20k
10
100
Impedance (ohm)
Frequency (Hz)
20
50
100
500
1k
5k
10k
20k
Hor.
Ver.
Frequency (Hz)
50
10
5
1
20
50
100
500
1k
5k
10k
20k
Frequency (Hz)
• with HF Horn Adapter
Polar Response
0°
10
330°
60°
0°
10
330°
30°
0
30°
0
-10
-10
300°
-20
60°
300°
-20
-30
-40
-40
270°
-40
-40
-30
-30
-30
240°
-20
120°
10
180°
500Hz
400Hz
315Hz
330°
30°
0
60°
-40
-40
-30
-30
-30
150°
2000Hz
1600Hz
1250Hz
60°
300°
-20
240°
10
180°
150°
30°
0
60°
60°
300°
-20
1000Hz
800Hz
630Hz
330°
330°
30°
0
0
-10
300°
-20
60°
-30
-30
-30
-40
-40
-40
-40
270°
270°
-30
-20
240°
-20
120°
0
10
180°
240°
-20
120°
240°
0
150°
150°
240°
10
180°
4000Hz
3150Hz
2500Hz
240°
-40
-40
-30
-30
-30
240°
-20
120°
0
150°
16000Hz
12500Hz
10000Hz
240°
-20
120°
-10
-10
240°
10
180°
8000Hz
6300Hz
5000Hz
SPL vs. Frequency
0
270°
90°
-40
-20
120°
-10
-10
-10
90°
90°
-40
-30
270°
270°
90°
-40
150°
240°
10
180°
240°
-10
0
240°
10
180°
4000Hz
3150Hz
2500Hz
Phase vs. Frequency
300°
-20
-30
90°
2000Hz
1600Hz
1250Hz
0°
10
-40
-30
240°
10
180°
-30
-40
240°
0
150°
-10
-10
300°
240°
0°
10
330°
30°
0
-20
-20
120°
-10
0
10
180°
500Hz
400Hz
315Hz
0°
10
330°
240°
-10
240°
-40
270°
150°
8000Hz
6300Hz
5000Hz
0
240°
10
180°
16000Hz
12500Hz
10000Hz
Beamwidth vs. Frequency
180
110
100
80
70
200
0
-90
60
-180
20
50
50
100
500
1k
5k
10k
20k
Frequency (Hz)
40
Beamwidth (deg)
Phase (deg)
90
90
100
50
Impedance vs. Frequency
50
100
500
1k
5k
10k
200
20k
10
100
Frequency (Hz)
Impedance (ohm)
30
20
-20
120°
-30
90°
SPL (dB)
240°
270°
90°
-40
-20
-10
-10
300°
270°
90°
120°
300°
-20
-40
270°
0°
10
330°
30°
0
60°
-30
90°
240°
10
180°
1000Hz
800Hz
630Hz
0°
10
300°
-20
-40
0
150°
60°
0
-10
-30
-10
240°
300°
330°
30°
-40
0
150°
0°
10
330°
0
-30
-10
240°
30°
-10
-20
0
-20
150°
60°
-10
-10
120°
-20
120°
330°
0
-10
0
10
180°
30°
240°
0°
10
0°
10
30°
-10
0°
10
60°
270°
90°
-40
-20
300°
-20
-30
90°
150°
60°
-40
270°
120°
330°
0
-10
-30
90°
vertical
horizontal
0°
10
30°
20
50
100
500
1k
Frequency (Hz)
50
5k
10k
20k
Hor.
Ver.
10
5
1
20
50
100
500
1k
5k
10k
20k
Frequency (Hz)
TOA Corporation F-2000 3/4
OPTIONAL BRACKETS
CLUSTER BRACKET
POLE MOUNT BRACKET
172 (6.77")
213.3 (8.4")
for indoor use
YS-60B
Approx. ø90 (ø3.5") to ø340
(ø13.4") mm
• Finish:
Electroless zinc-plated
• Weight:
360g (0.79lb.) (per band)
• Product Composition: Mounting band x 2
• Applicable Pole:
213.3 (8.4")
Top View
16–ø4.8 (ø0.19")
14 (0.55")
17
(0.67")
11 (0.43")
1.2 (0.05")
45
(1.77")
110 (4.33")
A'
Front View
12 (0.47")
25 (0.98")
M10
• Finish:
Steel plate, black, paint
• Dimensions: 213.3 (W) × 71 (H) × 213.3 (D)mm
(8.4" × 2.8" × 8.4")
• Weight:
1.2kg (2.65 lb)
A
25 (0.98")
HY-CL20B
71 (2.8")
45
(1.77")
16–M5
6.7 (2.64")
12–ø5.8 (ø0.23")
(suspension hole)
ø9.8 (ø0.39")
110 (4
.33")
60 (2.3
6")
A – A'
31 (1
.22")
1200 (47.24")
ø9.8 (ø0.39")
CEILING MOUNT BRACKET
5")
(0.2
6.3
7.2 (2.85")
for indoor use
(0.2 6.3
5")
* 2 units in set
40°
Top View
37
(1.46"
)
172 (6.77")
SP-131*
• Finish:
ø40
(ø1.57")
ø120 (ø4.72")
• Weight:
Bracket: Stainless (SUS304)
Bolt, nut, washer: Stainless
330 g (0.73 lb.) (per bracket)
Front View
32 (1.26")
45 (1.77")
Side View
3
45
(1.77")
4–M5
40
(1.57")
3 (0.12")
11 (0.43")
ø9.8 (ø0.39")
R90
Bottom View
• Finish:
Steel plate, black, paint (HY-CM20W: white, paint)
• Dimensions: 84 (W) × 135 (H) × 175 (D)mm (3.31" × 5.31" × 6.89")
• Weight:
610g (1.34 lb)
30
(1.18")
56
(2.20")
84 (3.31")
HY-CM20B/W
115 (4.53")
37 (1.46")
10 (0.39")
135 (5.31")
175 (6.89")
136 (5.35")
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
F-2000B/F-2000W
F-2000BT/F-2000WT
F-2000BTWP/F-2000WTWP
The speaker shall be a two-way bass-reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a 20 cm (8") cone-type woofer.
The high frequency component shall be a 25 mm (1")
dome tweeter. For clear, wide-area sound coverage,
the speaker shall include 110° (H) × 100° (V) wide
dispersion-angle high frequency horn, plus an easilyadded 80° (H) × 80° (V) dispersion angle horn adapter
for tighter dispersion control.
The speaker shall come with separate HF and LF
protection circuitry.
The speaker shall be rated at 8 ohms. The sensitivity at
a distance of 1m with a 1 W input level applied shall be
92 dB and 93 dB using the horn adapter. The rated
power handling shall be 60 W continuous pink noise
and 180 W continuous program. The speaker shall
have a frequency response of 65 – 20kHz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall be available in white or black,
and also be repaintable. The grille shall be a punched
net, surface-treated steel plate. Brackets for speakerstand, wall and ceiling installation shall be included,
and there shall be also optionally available brackets for
more demanding installation venues.
The unit shall be compact and lightweight with
dimensions of 244 × 373 × 235 mm (9.61" × 14.69" ×
9.25") and a weight of 6.5 kg (14.33 lbs).
The speaker shall be TOA model F-2000B/F-2000W.
The ceiling mount bracket shall be the HY-CM20B/
HY-CM20W.
The cluster bracket shall be the HY-CL20B.
The subwoofer shall be the FB-100 or FB-120B/W.
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a 20 cm (8") cone-type woofer.
The high frequency component shall be a 25 mm (1")
dome tweeter. For clear, wide-area sound coverage,
the speaker shall include 110° (H) × 100° (V) wide
dispersion-angle high frequency horn, plus an easilyadded 80° (H) × 80° (V) dispersion angle horn adapter
for tighter dispersion control.
The rated input shall be 60 W. The speaker shall
include a transformer having multiple taps (3 W, 15 W,
30 W, 60 W at 100 V and 1.5 W, 7.5 W, 15 W, 30 W, 60
W at 70 V) adjustable via the rear of the enclosure. The
sensitivity at a distance of 1m with 1 W input level
applied shall be 92 dB and 93 dB using the horn
adapter. The speaker shall have a frequency response
of 65 – 20kHz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall be available in white or black,
and also be repaintable. The grille shall be a punched
net, surface-treated steel plate. Brackets for speakerstand, wall and ceiling installation shall be included,
and there shall be also optionally available brackets for
more demanding installation venues.
The unit shall be compact and lightweight with
dimensions of 244 × 373 × 235 mm (9.61" x 14.69" x
9.25") and a weight of 7.4 kg (16.31 lbs).
The speaker shall be TOA model F-2000BT/F-2000WT.
The ceiling mount bracket shall be the HY-CM20B/
HY-CM20W.
The cluster bracket shall be the HY-CL20B.
The subwoofer shall be the FB-100 or FB-120B/W.
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a 20 cm (8") cone-type woofer.
The high frequency component shall be a 25 mm (1")
dome tweeter. For clear, wide-area sound coverage,
the speaker shall include 110° (H) × 100° (V) wide
dispersion-angle high frequency horn, plus an easilyadded 80° (H) × 80° (V) dispersion angle horn adapter
for tighter dispersion control.
The rated input shall be 60 W. The speaker shall
include a transformer having multiple taps (3 W, 15 W,
30 W, 60 W at 100 V and 1.5 W, 7.5 W, 15 W, 30 W, 60
W at 70 V) adjustable via the rear of the enclosure. The
sensitivity at a distance of 1m with 1 W input level
applied shall be 92 dB and 93 dB using the horn
adapter. The speaker shall have a frequency response
of 65 – 20kHz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall have an IEC 529 splash-proof
rating of IPX4. The speaker shall have an operating
temperature of -10° C to +50° C (14° F to 122° F). The
speaker shall be available in white or black, and also
be repaintable. The grille shall be a punched net,
surface-treated steel plate with anticorrosive paint.
Brackets for speaker-stand, wall and ceiling installation
shall be included, and there shall be also optionally
available brackets for more demanding installation
venues.
The unit shall be compact and lightweight with
dimensions of 244 x 373 × 235 mm (9.61" × 14.69" ×
9.25") and a weight of 7.4 kg (16.31 lbs).
The speaker shall be TOA model F-2000BTWP/
F-2000WTWP.
The pole mount brackets shall be the SP-131 and
YS-60B.
The subwoofer shall be the FB-100 or FB-120B/W.
TOA Corporation
www.toa.jp
TOA Corporation F-2000 4/4
Specifications are subject to change without notice.
(0806) 833-61-659-90 u
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement