FTO Certificate of Conformance (Bureau Veritas)

FTO Certificate of Conformance (Bureau Veritas)
AVS .4.13.14020/CC-21
Issuing Center: ANTWERP
Page 1/2
VERITAS
CERTIFICATE OF CONFORMITY
To ICAO Annex 14 - Fifth Edition
(Standards and recommended practices)
To FAA Advisory Circular 150/5345-46
To Technical Specification IEC 61827
AENA specification PPT 018-01/08
To NATO Stanag 3316 specification
Product:
FTO Omnidirectional Inset Light
Manufactured by ADB in Belgium
Application: Taxiway Edge, Apron & Turn Pan Inset Edge Lights,
Aircraft Stand & Apron manoeuvring Lights, Heliport Approach,
Landing direction, TLOF & FATO Lights
- was found
•
•
•
•
•
•
•
in conformity with :
the catalogue sheet A03.441 & A11.1 00
the ICAO - Annex 14 - Volume I - §5.3.17; 5.3.26
the ICAO - Annex 14 - Volume II - Section 5.3
the FAA AC 150/5345-46 requirements for L-852-T & -E Inset Lights
The NATO Stanag 3316 & 3652
The IEC TS 61827
The AENA Specification PPT 018-01/08
- Date of inspection: July 2nd, 2013.
- and has been, upon request of:
ADB
Leuvensesteenweg, 585
B -1930 ZAVENTEM - BELG IUM
- inspected
•
•
•
•
•
•
•
in conformity with the applicable requirements of
the catalogue sheet A03.441 & A11.1 00
the ICAO - Annex 14 - Volume I - §5.3.17; 5.3.26
the ICAO - Annex 14 - Volume II - Section 5.3
the FAA AC 150/5345-46 requirements for L-852-T & -E Inset Lights
The NATO Stanag 336 & 3652
The IEC TS 61827
The AENA Specification PPT 018-01/08
Issued at Antwerp, July 2nd, 2013
Particulars of inspection: detailed hereafter
Mr Rudi Vandenbempt
Inspector Industry
BUR:;;f{~:,;r;
This certificate is on ly va lid for a period of 5 years from the issua nce date, as far as no changes
of production process, equ ipment charact eristics nor of applicable requirements occur during
this period of validity.
AVS.4.13.14020/CC-21
Issuing Center: ANTWERP
Page 2/2
VERITAS
The following survey operations have been carried out without noticeable remarks:
•
Attendance to tests at the Laboratory premises of the manufacturer:
o Examination of test equipment
o Checking of installation of units before testing
o Attendance to photometric tests per applicable procedures and method
o Attendance to the Colorimetric tests per applicable procedure & method
•
•
Statistical test results per IEC 61827
Test results are detailed in the attached test records.
CONCLUSION
Taking into account the satisfactory results of actual tests and examinations we confirm
that the manufacturing and the test results for the above specified units are in
conformity with applicable standards, specifications and data sheets.
(Details of standards and specifications are indicated on page 1 of this certificate and
data sheet as per catalogue).
ENCLOSURE
Test records of tests which have been attended, duly stamped for identification by
BUREAU VERITAS:
Photometric test reports:
• Results of intensity curves
• Colorimetry
Issued at Antwerp, July 2nd, 2013
Mr Rudi Vandenbempt
Inspector Industry
BUREAU VERITAS ANTWERP
This certificate is only valid for a period of 5 years from the issuance date, as far as no changes
of production process, equipment characteristics nor of applicable requirements occur during
this period of validity.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement