Welch Allyn Service Tool Take the hassle out of routine device

Welch Allyn Service Tool Take the hassle out of routine device
Take the hassle out of routine device
maintenance and troubleshooting.
Welch Allyn Service Tool
Streamline the process of preemptive and routine maintenance
with the Welch Allyn Service Tool.
Now you can simplify service and minimize the resources you need to keep devices on the floor and performing
at their peak.
With the Welch Allyn Service Tool, you can:
• T roubleshoot devices
•M
inimize offsite repairs
• I nstall software updates and upgrades
• View reports and other information
•P
erform device verification and calibration
•A
ssign device location on floor
It also helps you enhance the value and longevity of your
Welch Allyn devices and systems by providing a gateway for
biomeds to easily and remotely collaborate with Welch Allyn
service technicians via our secure PartnerConnect™ remote
network—and add future clinical applications through the
most cost-effective, innovative methods possible.
Welch Allyn Service Tool
Welch Allyn Service Tool License
The Welch Allyn Service Tool is available in the
following editions:
Review product information
Receive notifications of updates and upgrades
• Silver: This is the edition that accompanies your new
Welch Allyn platform device.
• Gold: This edition is required to perform functional verification and requires a license. Online training is included as a
standard feature with the Biomed Partnership Program. For
information about acquiring this license, contact Welch Allyn.
Note: To qualify for the Gold license, you must attend the Welch Allyn
Technical Training course or complete online training. Please contact
your Welch Allyn sales representative for additional information.
Verification
Calibration
• Review product information: Manage your lists of installed modules, installed firmware and
hardware versions, warranty and repair information, status, and usage history.
• Receive notifications of updates and upgrades: Manage and maintain entire inventory of
supported Welch Allyn products. With an Internet connection, automatically receive firmware
updates and feature upgrades for your supported products, or software upgrades.
• Install updates and upgrades: Manage lists of all modules in the device with upgradeable
firmware, showing the firmware version number and available upgrade versions.
• Schedule periodic maintenance: Use the Service Tool to set the service interval for each
maintained device.
• View and save logs: Download and save log files from the device for analysis to help diagnose
and identify reported issues.
• User accounts: Create user accounts and set permission levels to control access to the features,
allowing one group to perform administrative tasks and another to perform service tasks.
• Functional verification: Test each component of the system to ensure its performance meets
design specifications.
• Calibration verification: Check any system requiring calibration and, if necessary, perform
re-calibration to match the design specifications.1,2
• Device recovery: In the rare case where a device can no longer boot due to corrupted firmware,
use the Welch Allyn Service Tool to reinstall the firmware.
• Upgradeable: Add new plug-ins to support future Welch Allyn products.
Calibration verification is required to meet the periodic maintenance requirements. This feature is not supported for all products
and requires Welch Allyn Service Tool Gold edition for each supported product.
Some sensors and modules cannot be calibrated using the Welch Allyn Service Tool.
1
2
For more information about Welch Allyn Support Services, please consult
your local Welch Allyn representative, or go to: www.welchallyn.com/services
Welch Allyn Corporate Headquarters
4341 State Street Road, P.O. Box 220
Skaneateles Falls, NY 13153-0220 U.S.A.
Telephone: +1.315.685.4602 OR +1.800.535.6663
Fax: +1.315.685.0054
www.welchallyn.com/services
© 2010 Welch Allyn SM4039 Rev A
System Requirements
Supported Operating Systems: Windows 7; Windows Server
2008; Windows Vista; Windows XP
Supporting Software: .Net Framework 3.5
Driver: WACP USB driver (included with installation)
Processor: 400 MHz Pentium processor or equivalent (Minimum); 1 GHz Pentium processor or equivalent (Recommended)
RAM: 1 GB (Minimum); 2 GB (Recommended)
Hard Disk: Up to 10 GB of available space may be required
CD-ROM Drive: Required
Display: 800 x 600, 256 colors (Minimum); 1024 x 768 high
color, 32-bit (Recommended)
USB 2.0 (Required)
Antivirus Protection (Recommended)
Internet Connection (Required in order to download files)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement