Alliance Laundry Systems | Home Laundry Automatic Washers | Installation manual | Alliance Laundry Systems Home Laundry Automatic Washers Installation manual

Operation
Automatic
Washers
Home Laundry
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
www.comlaundry.com
Part No. 38899R7
August 2007
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. (If the washer changes ownership, be
sure this manual accompanies the washer.)
WARNING
For your safety and to reduce the risk of fire or an explosion, do not store or use gasoline or
other flammable vapors and liquids in the vicinity of this or any other appliance.
W022
IMPORTANT: Read the complete Installation and Operation Instructions before using the washer.
38899
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
Table of
Contents
Safety Information..............................................................................
Explanation of Safety Messages...........................................................
Important Safety Instructions ...............................................................
3
3
3
Operation.............................................................................................
Loading the Washer..............................................................................
Load Articles....................................................................................
Load Sizes.............................................................................................
Water Level ..........................................................................................
Water.....................................................................................................
Water Hardness ................................................................................
Wash Temperature ...........................................................................
Laundry Tips.........................................................................................
Washing Temperature Guide................................................................
Optional Features..................................................................................
Bleach Dispenser .............................................................................
Fabric Softener Dispenser................................................................
Determine Proper Cycle .......................................................................
To Wash Clothes...................................................................................
Timer................................................................................................
Soaking ............................................................................................
5
5
5
5
6
6
6
6
8
9
10
10
10
11
11
12
12
Maintenance ........................................................................................
User-Maintenance Instructions.............................................................
Cold Weather Care...........................................................................
Care of Your Washer .......................................................................
Replacing Hoses...............................................................................
Filter Screens ...................................................................................
Vacations and Extended Non-Use ...................................................
Reinstallation of Shipping Materials ...............................................
Motor Overload Protector.....................................................................
Before You Call for Service .................................................................
If Service Is Required ...........................................................................
Information for Handy Reference.........................................................
13
13
13
13
13
13
13
14
14
15
16
17
© Copyright 2007, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any
means without the expressed written consent of the publisher.
2
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38899
Safety Information
Explanation of Safety Messages
Important Safety Instructions
Throughout this manual and on machine decals, you
will find precautionary statements (“DANGER,”
“WARNING,” and “CAUTION”) followed by specific
instructions. These precautions are intended for the
personal safety of the operator, user, servicer, and
those maintaining the machine.
Save These Instructions
DANGER
WARNING
To reduce the risk of fire, electric shock,
serious injury or death to persons when
using your washer, follow these basic
precautions:
W023
Indicates an imminently hazardous
situation that, if not avoided, will cause
severe personal injury or death.
WARNING
Indicates a hazardous situation that, if not
avoided, could cause severe personal
injury or death.
CAUTION
Indicates a hazardous situation that, if not
avoided, may cause minor or moderate
personal injury or property damage.
Additional precautionary statements (“IMPORTANT”
and “NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used
to inform the reader of specific procedures where
minor machine damage will occur if the procedure
is not followed.
NOTE: The word “NOTE” is used to communicate
installation, operation, maintenance or servicing
information that is important but not hazard
related.
38899
1. Read all instructions before using the washer.
2. Refer to the Grounding Instructions in the
Installation manual for the proper grounding of
the washer.
3. Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry-cleaning solvents, or other
flammable or explosive substances as they give
off vapors that could ignite or explode.
4. Do not add gasoline, dry-cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors that
could ignite or explode.
5. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system has not
been used for such a period, before using a
washing machine or combination washer-dryer,
turn on all hot water faucets and let the water
flow from each for several minutes. This will
release any accumulated hydrogen gas. THE
GAS IS FLAMMABLE. DO NOT SMOKE OR
USE AN OPEN FLAME DURING THIS TIME.
6. Do not allow children to play on or in the washer.
This appliance is not intended for use by young
children or infirm persons without supervision.
Young children should be supervised to ensure
that they do not play with the appliance.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3
Safety Information
7. Before the washer is removed from service or
discarded, remove the lid to the washing
compartment.
19. If the supply cord is damaged, it must be replaced
with a special cord or assembly available from
the manufacturer or its service agent.
8. Do not reach into the washer if the washtub or
agitator is moving.
20. Be sure water connections have a shut-off valve
and that fill hose connections are tight. CLOSE
the shut-off valves at the end of each wash day.
9. Do not install or store the washer where it will be
exposed to water and/or weather.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer, or
attempt any servicing unless specifically
recommended in the user-maintenance
instructions or in published user-repair
instructions that you understand and have the
skills to carry out.
12. To reduce the risk of an electric shock or fire, DO
NOT use an extension cord or an adapter to
connect the washer to the electrical power source.
13. Use your washer only for its intended purpose,
washing clothes.
14. ALWAYS disconnect the washer from electrical
supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
15. Install the washer according to the Installation
Instructions. All connections for water, drain,
electrical power and grounding must comply
with local codes and be made by licensed
personnel when required. Do not do it yourself
unless you know how!
16. To reduce the risk of fire, clothes which have
traces of any flammable substances such as
vegetable oil, cooking oil, machine oil,
flammable chemicals, thinner, etc. or anything
containing wax or chemicals such as in mops and
cleaning cloths, must not be put into the washer.
These flammable substances may cause the
fabric to catch on fire by itself.
17. Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
18. Keep your washer in good condition. Bumping or
dropping the washer can damage safety features.
If this occurs, have your washer checked by a
qualified service person.
4
21. Lid MUST BE CLOSED any time the washer is
to agitate or spin. DO NOT by-pass the lid switch
by permitting the washer to agitate or spin with
the lid open. A brake will stop the washtub within
seconds if the lid is opened during spinning. If
the washtub does not stop when the lid is opened,
remove the washer from use and call the service
person.
22. Always read and follow manufacturer’s
instructions on packages of laundry and cleaning
aids. Heed all warnings or precautions. To reduce
the risk of poisoning or chemical burns, keep
them out of the reach of children at all times
(preferably in a locked cabinet).
23. Always follow the fabric care instructions
supplied by the garment manufacturer.
24. Never operate the washer with any guards and/or
panels removed.
25. DO NOT operate the washer with missing or
broken parts.
26. DO NOT by-pass any safety devices.
27. Failure to install, maintain, and/or operate this
machine according to the manufacturer's
instructions may result in conditions which can
produce bodily injury and/or property damage.
NOTE: The WARNING and Important Safety
Instructions appearing in this manual are not
meant to cover all possible conditions and
situations that may occur. Common sense, caution
and care must be exercised when installing,
maintaining, or operating the washer.
Always contact your dealer, distributor, service agent
or the manufacturer about any problems or conditions
you do not understand.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38899
Operation
Loading the Washer
Load Sizes
NOTE: Always add detergent first. Refer to
instructions for use on detergent packaging.
Small
3-4 perm. press dress shirts
OR
1 twin sheet, 1 pillow case
OR
1-2 lightweight dresses
Load Articles
Load items by the amount of space they take up, not by
their weight. Mix large and small items in a load to get
the best washing results.
Medium
Drop items loosely into the washtub. The bulk of the
clothes rather than the weight will determine load size.
Do not pack items in or wrap them around the agitator.
Overloading can cause poor cleaning, excessive
wrinkling, and tears.
6-7 perm. press shirts
OR
2 twin sheets, 2 pillow cases
OR
8 standard bath towels,
6 wash cloths
Large
10-11 perm. press shirts
OR
2 full size sheets, 2 pillow cases,
2 pair men’s pajamas
OR
12 standard bath towels,
4 hand towels, 4 wash cloths
Extra Large (OPTIONAL)
W280I
W280I
Figure 1
Items should move freely through the wash water for
best cleaning results. Items should rollover, sink and
then reappear.
When washing very large items, do not fill washtub as
full as with other loads.
38899
8-9 shirts and
5 pair polyester pants
OR
2 queen size sheets,
4 pillow cases, 2 nightgowns
1 pair men’s pajamas
OR
1 queen size bedspread
Reset (OPTIONAL)
Use the RESET if agitation has started and more water
is needed for the load.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5
Operation
Water Level
Water
Water Hardness
Hard water will not remove soil as well as soft water
and can result in gray, dingy laundry. To get clothes
clean in hard water, use a phosphate detergent or use
more detergent if using a non-phosphate detergent. Do
not use soap.
Hard Water May Be Softened By:
1. A mechanical water softener installed in your
home.
2. The use of a packaged water conditioner.
Soft Water
W281I
RIGHT
W281I
Figure 2
Water should be soft enough to allow soaps and
detergents to remove soil effectively. Clothes will be
whiter and brighter when washed and rinsed in soft
water.
Wash Temperature
Hot Water
Hot water will give the best results of cleaning and
sanitizing, but it is not suitable for all items. It is best
for sturdy whites and colorfast items, heavily soiled
items and diapers.
Warm Water
By using warm water, there is less chance of color loss
in items. Warm water also reduces wrinkling in
permanent press items. Use with light and moderate
soils, non-colorfast or dark colors, permanent press,
silks, woolens, nylon, and acrylic.
W282I
WRONG
W282I
Figure 3
The water level in your washer should fit the size of
your wash load. Small loads will use lower water
levels. There must be enough water in the washtub to
allow items to move and turn over freely.
Cold Water
Cold water is less effective in cleaning than hot or
warm water, but it does minimize wrinkling and color
fading. Use it for washing extra-sensitive clothes and
for the rinsing of all fabrics.
Overloading the washtub can result in poor washing
and rinsing. Overloading may also cause wrinkling
and tearing of items.
IMPORTANT: If in doubt, always use a higher
water level. Most average loads will require a water
setting of Large. Failure to have the correct volume
of water relative to the load will increase the
incidence of excessive lint.
6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38899
Operation
Energy
You can save energy when washing by following a few
guidelines:
1. Heating water accounts for the greatest energy
expense when washing. Save on heating water by
using warm or cold washes as well as cold rinses.
2. Wash full loads, but do not overload.
3. Use soak cycles for heavily soiled items to
reduce wash times.
4. Select a shorter wash time for lightly soiled
items.
60°C
(140°F)
HOT
37°C
(100°F)
WARM
18°C
(65°F)
COLD
W121I
W121I
Figure 4
38899
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7
Operation
Laundry Tips
Laundry
Aids
Soak/Pretreat
Products
Use
• Use a soaking agent and follow steps under To
•
Detergents/ Soaps
Wash Clothes section or soak overnight to remove
stains and soils.
Always follow manufacturer’s instructions with
any pretreatment product.
• You may use detergent or soap in your washer. The
determining factor is the hardness of the water.
Always use detergent if the water is over three
grains hard.
Comments
• Do not use a soaking agent with
chlorine bleach.
• Do not use pretreaters around the
washer or dryer control panel.
They may harm the finish or panel
markings.
• Always put detergent or soap into
•
•
Bleaches
• Use to remove certain stains, disinfect, and keep
•
•
•
Fabric Softeners
• Use to soften clothes and remove static electricity
•
Water
Conditioners
Non-Precipitating
Type
Precipitating Type
clothes white.
Use bleach in the wash water only. Do not use
bleach in the rinse.
Follow directions on care label of garment.
Bleach should not be used as a substitute for
detergent. Use the recommended amount of
bleach.
from permanent press knits and other fabrics of
man-made fibers.
Add during the rinse cycle, or if available, use the
fabric softener dispenser, using no other product in
the rinse. Follow bottle directions carefully.
• When using liquid chlorine
•
•
bleach, always use the bleach
dispenser.
Always measure the bleach. Never
exceed one cup of bleach per full
load.
Never use chlorine bleach and
ammonia in the same wash cycle.
• Undiluted fabric softener poured
directly on clothes can stain them.
• Do not mix with detergent or
bleach.
• These products soften water by tying up the
hardness minerals. Recommended if using soap
with water over three grains hard, or when using
nonphosphate detergents.
• These products settle out hardness minerals by
converting them into particles that will not
dissolve in the water. If used with nonphosphate
detergent or soap in hard water, a deposit may
form on the clothes and washer parts.
8
wash tub before loading the
clothes.
Soap and nonphosphate powdered
detergents will not give good
washing results in hard water.
Soap in hard water will form
sticky deposits.
The use of powdered soap is not
recommended when washing in
cold water.
• Do not use with nonphosphate
detergents or soaps.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38899
Operation
Washing Temperature Guide
Water Temperature
Use
Comments
HOT
(approx. 60°C
[140°F])
•
•
•
•
Sturdy whites and colorfast items.
Work clothes.
Soiled items.
Diapers.
• Best cleaning for heavily soiled
•
•
•
•
•
Rinsing of some items (OPTIONAL).
Light and moderately soiled items.
Non-colorfast or dark colors.
Permanent press.
Silks, woolens, nylon, acrylic.
• Reduces wrinkling in permanent
WARM
(approx. 37°C
[100°F])
COLD
(approx. 18°C
[65°F])
• Rinsing of most items.
• Non-colorfast fabrics.
• Extra sensitive clothing.
items.
• Best for sanitizing.
press fabrics.
• Less fading.
• Reduces shrinking in knits.
•
•
•
•
Saves energy.
Reduces color fading.
Reduces wrinkling.
Reduces shrinking.
Table 1
38899
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9
Operation
Optional Features
1
Bleach Dispenser
The bleach dispenser is located in the left front corner,
under the lid.
2
Use liquid bleach in the dispenser. Powdered bleach
must not be used in the dispenser. Add powdered
bleach to the wash water.
Use no more than one cup chlorine bleach for large
loads, three-quarters cup for medium and one-half cup
for small loads.
3
Carefully pour recommended amount of bleach into
the dispenser during the first fill of the washer.
Be careful not to spill undiluted bleach. It is a strong
chemical and can damage some fabrics if it is not
properly diluted.
Fabric Softener Dispenser
To Use Dispenser
W284I
11111
After the clothes are loaded into the washtub and
before the start of the WASH cycle, pour the proper
amount of liquid fabric softener into the bottle
measuring cap (see bottle directions). Pour into
dispenser.
The large fabric softener dispenser allows for the
fabric softener to be diluted with water. We
recommend adding water up to the fill level. Do not
exceed tip of arrow, which indicates correct fill level.
Over-filling can allow fabric softener to spill onto the
clothes.
Setting the water level to medium or higher will result
in better performance from the fabric softener.
The fabric softener will remain in the dispenser during
the wash fill, agitation and spin. At the end of the wash
spin, the liquid fabric softener will be dispensed into
the washtub through the slots in the agitator and will
be mixed with the incoming rinse water.
To Clean the Dispenser
Remove the dispenser housing from agitator by
squeezing the lower part of the dispenser, pulling
directly upward and at the same time tilting slightly.
This will expose the dispenser cup, which is also
removable for cleaning (refer to Figure 5). Both
housing and cup can be soaked in hot soapy water and
rinsed clean. The funnel shape in top of agitator also
needs to be cleaned. The hole and the slots in the two
rings will require using a small brush for proper
cleaning.
10
1
2
3
Dispenser Housing
Dispenser Cup
Agitator
Figure 5
After cleaning, install dispenser cup, then push
dispenser housing directly downward onto top of
agitator until firmly snapped together.
Use Tips
• Fabric softener spilled onto garments may cause
staining. To remove, soak in a soapy solution
made from Sard Wonder Soap or rub the stain
with a bar of Sard, then wash.
• Liquid fabric softeners will be dispensed during
the final rinse and should not be combined with
bleach, bluing, starch, detergents, soaps or
packaged water conditioners.
• Fabric softener is not to be used in dispenser
when using Prewash cycle, if available.
• When adding detergent to wash water, do not
allow any to enter into softener dispenser cup, as
softener will become gummy.
To prevent softener buildup, the dispenser can be filled
with clean water for automatic cleaning. This can be
done in washing cycles other than when softener is
used.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38899
Operation
Determine Proper Cycle
To Wash Clothes
WARNING
To reduce the risk of fire, electric shock,
serious injury or death to persons, read the
Safety Information section before operating
your washer.
W026R2
Regular
Use for sturdy items, like play or work clothes, towels,
T-shirts, etc. The wash time selection will depend on
the type of fabric and the amount of soil. For the best
results when cleaning heavily soiled items, use a
longer wash time (15 minutes maximum). Lightly
soiled items require less wash time.
There are three settings in the REGULAR cycle —
Extra Clean, Normal and Light. The number shown
next to these settings is the length of agitation in
minutes. (For example: Setting the timer on Extra
Clean will be a 15 minute agitation).
IMPORTANT: Before using your new washer,
make sure the washer cord is plugged into an
electrical outlet that has the proper grounding and
polarity. Make sure the washer hoses are connected
to the hot and cold water faucets, and that the
faucets are turned on. Be sure the drain hose is not
kinked and is inserted into a drain. See the
Installation Instructions for details of proper
washer installation.
IMPORTANT: Prior to first wash, use an all
purpose cleaner, or a detergent and water solution,
and a damp cloth to remove shipping dust from
inside of washtub.
IMPORTANT: Remove all sharp objects from
laundry to avoid tears and rips to items during
normal machine operation.
1. Get the clothes ready for washing. Empty pockets
and cuffs. Sort items into separate loads. Pretreat
stains and heavily soiled areas.
Permanent Press Cycle
Use for permanent press items and synthetics. The
wash time selection will depend upon the type of
fabric and amount of soil.
There are two settings in the PERMANENT PRESS
cycle — Normal and Light. The number shown next to
these settings is the length of agitation in minutes. (For
example: Setting the timer on Normal will be a nine
minute agitation).
D305I
Figure 6
2. Measure and add detergent to the washtub.
Delicate
Wash delicate items usually washed by hand on this
cycle. A full tub of water is recommended (even for
small loads) to allow the delicate items to move freely
through the water. More water helps reduce fabric
wear, wrinkling, and provides for a clean wash.
There are two settings in the DELICATE cycle —
Normal and Light. The number shown next to these
settings is the length of time in minutes. (For example:
Setting the timer on Normal will be nine minutes
including short periods of agitation and long periods of
soaking.)
38899
W395I
Figure 7
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11
Operation
3. Add clothes loosely into the washtub.
IMPORTANT: Holding the LOAD SIZE (WATER
LEVEL) control in the RESET position can cause
flooding of the washer.
7. Select the cycle according to the type of fabric
being washed. Push the timer knob in and turn
clockwise to the desired cycle and wash time.
8. Pull the timer knob out to start the water fill.
Agitation will begin when the water reaches the
level you selected.
W281I
W281I
The washer will stop (pause) shortly before the
wash and rinse spins. Do not turn the timer
through these pauses. They are part of the cycle.
Timer
Figure 8
4. Close the lid. The washer will not agitate or spin
with the lid open.
Although the washer cycles are automatic, the timer
may be reset to lengthen, shorten or repeat a portion of
a cycle.
To set or reset the timer, push timer knob in to stop the
washer. Hold timer knob in firmly while turning it
clockwise to the setting desired. Pull timer knob out to
start the washer.
Soaking
W318I
Figure 9
5. Set WASH/RINSE temperatures.
NOTE: The washer will provide a cold rinse in all
TEMPERATURE settings. Cold rinses will save
you money and energy and will help reduce
wrinkling in permanent press and synthetics.
NOTE: The Energy Saver settings, marked with a
dot (•), show which temperature settings will use
the least energy.
6. Set LOAD SIZE (WATER LEVEL) control. Use
RESET if agitation has started and more water is
needed.
12
Set the timer knob in the center of the word “RINSE”
(this prevents the washer from spinning without first
filling with water). Place the soaking product and
clothes load in the washtub. Pull timer knob to start
washer fill. After fill is completed and agitation has
started, push the timer knob in. This will stop the
washer. When the clothes have soaked the desired
length of time, TURN THE TIMER KNOB TO THE
END OF THE RINSE SETTING, then pull the timer
knob out to start the spin.
CAUTION
Failure to turn the timer knob to the spin
cycle and completely draining the washtub
after soaking will result in the washer
overflowing and causing property damage.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
W256
38899
Maintenance
User-Maintenance Instructions
Replacing Hoses
Cold Weather Care
Hoses and other natural rubber parts deteriorate after
extended use. Hoses may develop cracks, blisters or
material wear from the temperature and constant high
pressure they are subjected to.
If the washer is delivered on a cold day (below
freezing), or is stored in an unheated room or area
during the cold months, do not attempt to operate it
until the washer has had a chance to warm up.
Care of Your Washer
Use only a damp or sudsy cloth for cleaning the
control panel. Some cleaning product sprays may
harm the finish on the control panel or damage the
interior of the hood.
Wipe the washer cabinet as needed. If detergent,
bleach or other washing products are spilled on the
cabinet, wipe immediately. Some products will cause
permanent damage if spilled on the cabinet.
Do not use scouring pads or abrasive cleansers.
The washtub will need no particular care though it
may need rinsing or wiping after an unusual load has
been washed. This also may be necessary if too little
detergent has been used.
Leave the lid open to allow the inside of the washer to
dry out after use. This helps prevent musty odors from
developing.
38899
All hoses should be checked on a yearly basis for any
visible signs of deterioration. Any hose showing the
signs of deterioration listed above should be replaced
immediately. All hoses should be replaced every five
years.
Filter Screens
Check the filter screens in the fill hoses for debris or
damage annually. Clean or replace them if necessary.
If the washer is filling with water slower than normal,
check the filter screens. Clean or replace them if
necessary.
Order filter screen Part No. F270300 from the nearest
authorized parts distributor.
Vacations and Extended Non-Use
IMPORTANT: To avoid possible property damage
due to flooding, turn off the water supply to the
washer whenever there will be an extended period
of non-use.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
13
Maintenance
Reinstallation of Shipping Materials
Motor Overload Protector
Shipping Brace
This internal overload protector will stop the motor
automatically in the event of an overload. The
overload protector will reset itself in two or three
minutes and the motor will restart automatically. If the
overload protector stops the motor again, remove the
washer from use and call the service person to correct
the problem.
The shipping brace in the lid opening should be saved
and reinstalled whenever the washer is moved. To
reinstall the brace, open the washer lid and place the
brace over the washer agitator, placing the back of the
brace into the washtub first.
Shipping Plug
The plastic shipping plug should be saved and
reinstalled any time the washer is moved. The plug fits
into two openings: the base opening and the shipping
plug opening on the bottom of the mobile pivot dome.
The plug MUST be inserted into both openings to
prevent damage to the washer. In order to accomplish
this, the shipping plug opening must be directly lined
up with the base opening. Refer to Figure 10.
1
2
3
TLW544N
1
2
3
Shipping Plug Opening
Base Opening
Shipping Plug
Figure 10
14
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38899
Maintenance
Before You Call for Service
If the Washer:
Won’t
Fill
Won’t
Start
Won’t
Agitate
Won’t
Spin
•
•
•
•
Be sure power cord is plugged all the way into the electrical
outlet.
•
•
•
•
•
•
•
•
•
Close the lid.
•
•
•
•
•
Check the house fuse or circuit breaker.
Has the motor overload protector cycled?
Turn on the hot and cold water faucets.
•
•
•
Pull timer knob out to start the washer.
Was the last spin completed?
•
Clean the screens in the water mixing valve and the filter screens
in the fill hoses.
•
Water is siphoned from the washer during the cycle. Refer to the
Installation Instructions supplied with the washer. Review step
for installing drain hose.
•
•
Are controls properly set?
•
38899
Possible Reason – Do This to Correct
•
Broken drive belt. Call the service person.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
15
Maintenance
If Service Is Required
If service is required, contact the nearest Factory
Authorized Service Center.
If you are unable to locate an authorized service center
or are unsatisfied with the service performed on your
washer, contact:
When calling or writing about your washer, PLEASE
GIVE THE MODEL AND SERIAL NUMBERS. The
model and serial numbers are located on the
nameplate. The nameplate will be in the location
shown in Figure 11. Please include a copy of your bill
of sale and any service receipts you have.
WARNING
Alliance Laundry Systems
Shepard Street
P.O. Box 990
Ripon, Wisconsin 54971-0990
Phone: (920) 748-3121
To reduce the risk of serious injury or death,
DO NOT repair or replace any part of the unit
or attempt any servicing unless specifically
recommended in the user-maintenance
instructions or in published user-repair
instructions that you understand and have
the skills to carry out.
1
W025E
W334I
1
Nameplate
Figure 11
16
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38899
Maintenance
Information for Handy Reference
Alliance Laundry Systems
Shepard Street
P.O. Box 990
Ripon, WI 54971-0990
U.S.A.
Date Purchased
Model Number
Serial Number
Dealer’s Name
Dealer’s Address
Phone Number
Service Agency
Service Agency Address
Phone Number
NOTE: Record the above information and keep your sales slip. Model and serial numbers are located on
the nameplate.
38899
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
17
Download PDF