315-315A /312-312A /210-210A
Active and Passive Systems
315 - 315A
3-way
315
passive
400 Watts into 8 ohms
315A
active
350 W continuous, 650 W peak
(MosFet / processor controlled)
312 - 312A
3-way
312
passive
400 Watts into 8 ohms
312A
active
350 W continuous, 650 W peak
(MosFet / processor controlled)
210 - 210A
2-way
210
passive
250 W into 8 ohms
210A
active
250 W continuous, 400 W peak
(MosFet / processor controlled)
Montarbo ha studiato e realizzato questi
sistemi acustici di avanguardia perseguendo un elementare quanto non facile
obiettivo: ottenere la più alta efficienza
acustica con un ingombro rigorosamente
contenuto.
Nulla tuttavia è stato trascurato perchè
la qualità di ascolto e l’affidabilità fossero
all’altezza della eccezionale pressione
acustica erogata dai box 315, 312 e 210.
Tale risultato, che solo l’ascolto diretto vi
consentirà di verificare, è il prodotto di
una lunga sperimentazione e di ripetuti
affinamenti sempre condotti alla luce
della nostra pluridecennale esperienza.
Come la maggioranza dei sistemi di
altoparlanti Montarbo, anche questi sono
disponibili nelle versioni attive 315A, 312A
e 210A, ognuna delle quali incorpora un
finale di potenza a MosFet progettato in
funzione delle caratteristiche del sistema.
Una tradizione Montarbo.
Da 30 anni, produciamo casse amplificate
secondo una filosofia di estrema semplificazione del progetto, in modo da estendere i margini di affidabilità e la base di
utilizzo dei nostri prodotti da sempre
realizzati avendo ben presente i problemi
e le necessità concrete dei singoli utenti.
Sia le versioni passive, sia quelle attive
incorporano un cross-over passivo di alta
qualità affiancato da un processore
passivo che ottimizza il rendimento e la
linearità di risposta del sistema.
In aggiunta a questo, nei sistemi attivi è
incorporato un processore attivo che
controlla i parametri di funzionamento
dell’amplificatore e degli altoparlanti in
tempo reale, per garantire le massime
prestazioni senza il rischio di sovraccarichi
e distorsioni.
Montarbo has developed these
advanced speaker systems with a simple,
but elusive goal in mind: to achieve the
maximum acoustic efficiency while
maintaining extremely compact overall
dimensions.
We spared no efforts and spent a lot
of time on continuous critical listening,
repeated laboratory measurements
and refinements of the design, to assure that sound fidelity and reliability
are in line with the unparalled sound
pressure delivered by the enclosures
315, 312 and 210.
When you hear the excellent sound
performance of these speakers, you’ll
agree that the results were worth our
special efforts.
Like the majority of Montarbo speaker
systems, they are also available in the
active versions 315A, 312A and 210A,
each with built-in dedicated MosFet
power amplifier.
A Montarbo tradition.
For over 30 years we’ve been making
powered speaker enclosures based on
a philosophy of highly simplified
design projects, thus ensuring a broad
margin of reliability, and extending the
application potential of our products, all
of which are traditionally constructed
with individual problems and concrete
requirements of individual users well
to the forefront of considerations.
Both active and passive versions are
fitted with a high quality passive crossover network. Inside passive versions
there's a passive controller that linearizes and protects the loudspeakers.
In active versions, you find an active
processor that constantly monitors the
operating conditions of amplifier and
loudspeakers to prevent overloading
and distorsion.
315-315A /312-312A /210-210A
Montarbo hat diese zukunftsweisende
Boxenserie entwickelt und dabei das
schwierige Ziel verfolgt: höchstmöglichen
Schalldruck bei ausgesprochen geringen
Abmessungen.
Es wurde an nichts gespart, um optimalen
Sound und Zuverlässigkeit, die alle
Montarbo-Produkte im besonderen Maße
auszeichnen, auch bei den Boxen 315, 312
und 210 zu erreichen.
Dieses Ergebnis das nur durch einen
direkten Soundcheck überprüft werden
kann, ist auf langwierige Experimente
und auf wiederholte Verbesserungen
zurückzuführen, die immer unter Berücksichtigung unserer jahrzehntelangen
Erfahrungen durchgeführt wurden.
Wie die meisten Montarbo Lautsprechersysteme, sind die 315, 312 und 210 auch
in den Aktivausführungen 315A, 312A
und 210A verfügbar, je mit eingebauter,
dedizierten MosFet Endstufe.
Eine Montarbo-Tradition.
Es ist allgemein bekannt, daß wir seit
30 Jahren Aktivboxen herstellen und daß
unsere Unternehmensphilisophie darin
besteht, Produkte extrem einfach zu
gestalten, um durch Zuverlässigkeit und
einfache Handhabung dem einzelnen
Benutzer ein optimales Werkzeug an die
Hand zu geben.
Neben dem Audio-Prozessor mit passiver
Weiche ist jedes Aktivsystem mit einem
ausgereiften Aktivprozessor versehen, der
nicht nur die spezifischen Eigenschaften
des jeweiligen Lautsprechers optimiert,
sondern auch direkt alle Arbeitsvorgänge
des gesamten internen Systems kontrolliert
und sie auf diese Weise vor überflüssigen
und schädlichen Überlastungen schützt.
Montarbo a étudié et réalisé ces systèmes
acoustiques d’avant-garde dans la
poursuite d’un objectif élémentaire mais
cepen dant difficile: obtenir la plus haute
efficacité acoustique dans un encombrement le plus réduit possible.
Rien n’a été négligé pour que la qualité
d’écoute et la fiabilité soient à la hauteur
de la pression acoustique exceptionnelle
offerte par les enceintes 315, 312 et 210.
Ce résultat, que seule l’écoute directe
vous permettra de vérifier, est l’issue d’une
longue expérimentation et d’améliorations
sans cesse apportées au cours de plusieurs
décennies, par notre service recherche et
développement.
Comme la plupart des enceintes Montarbo
ces systémes sont disponibles tant en version passive que en version active, avec
unités de puissance a MosFet incorporés
conçues en fonction du système.
Une tradition Montarbo.
Il est bien connu que depuis 30 ans nous
réalisons des enceintes amplifiées selon
une philosophie d’extrême simplification
de la conception de façon à augmenter
la fiabilité et la multiplicité d’utilisation
de nos produits, réalisés depuis toujours
en tenant compte des problèmes et des
besoins réels de chaque utilisateur.
Outre le crossover passif, chaque enceinte
active est dotée d’un processeur actif
sophistiqué qui non seulement optimise
les caractéristiques propres de chaque
haut-parleur utilisé, mais contrôle directement la courbe de réponse, de même que
tous les comportements de rendement
du systéme.
Montarbo proyectó y realizó estos sistemas acústicos de vanguardia en pos de un
objetivo elemental pero nada fácil:
obtener la más alta eficiencia acústica en
dimensiones rigurosamente contenidas.
Nada fue dejado de lado para que la calidad de audición y la fiabilidad, (estandarte
de toda la producción de Montarbo), estuvieran a la altura de la excepcional presión
acústica suministrada por las cajas 315, 312
y 210.
Este resultado, que solo la escucha directa
le permitirá verificar, es el producto de una
larga experimentación y de repetidas
afinaciones, siempre realizadas a la luz de
la experiencia acumulada por Montarbo
en el curso de varias décadas.
Como la mayoría de los sistemas de
altavoces Montarbo, 315, 312 y 210 son
dosponibles en versiones activas (315A,
312A y 210A) que incorporan potentes
finales de potencia dedicados.
Una tradiciòn Montarbo.
Desde hace 30 años fabricamos cajas de
altavoces según una filosofía de extrema
simplificación del proyecto, de manera
de extender los márgenes de fiabilidad y
la base de uso de nuestros productos,
todos los cuales fueron y son realizados
teniendo en cuenta los problemas y las
necesidades concretas de cada usuario.
Tanto las versiones pasivas como activas
de los sistemas 315, 312 y 210 incorporan
un cross-over pasivo de alta calidad, al
cual se une un procesador pasivo que optimiza el rendimiento y la linealidad de respuesta del sistema. Además de ello, en los
sistemas activos se incluye un procesador
activo que controla los parámetros de
funcionamiento del amplificador y de los
altavoces en tiempo real, para garantizar
las máximas prestaciones sin riesgos de
sobrecargas ni distorsiones.
315-315A /312-312A /210-210A
CARATTERISTICHE GENERALI
MAIN FEATURES
CARACTERÍSTICAS GENERALES
Versioni passive e attive:
• Processore audio con crossover passivo che
ottimizza la linearità della risposta in frequenza
ed il rendimento del sistema.
• Componenti custom.
• Multistrato di betulla ad incollaggio fenolico.
Passive and active versions:
• Audio processor with passive cross-over to optimize the linearity of the frequency response and
the efficiency of the system.
• Custom components
• Phenyl-glued multiply birch.
Versiones pasivas y activas:
• Procesador de audio con cross-over pasivo que
optimiza la linealidad de la respuesta en frecuencia y el rendimiento del sistema.
• Componentes custom
• Multicapa de abedul con cola fenòlica.
Versioni passive:
• Ingressi sbilanciati con prese XLR e jack in
parallelo.
• Impedenza standard 8 ohm per consentire la
massima flessibilità di collegamento.
Passive versions:
• Unbalanced XLR inputs, with jacks wired in
parallel.
• 8 ohms standard impedance for maximum
connection flexibility.
Versiones pasivas :
• Entradas desbalanceadas con tomas XLR y jack
conectadas en paralel
• Impedancia estándar de 8 Ω para permitir la
máxima flexibilidad de conexión.
Versioni attive (A):
• Amplificatore a MosFet incorporato.
• Processore attivo che ottimizza le caratteristiche
specifiche di ogni altoparlante e controlla tutti i
comportamenti di lavoro dell’intero sistema, garantendo così una risposta in frequenza costantemente lineare e proteggendo il sistema da sovraccarichi.
• Ingressi bilanciati collegati in parallelo, con prese
XLR maschio e femmina.
• Controllo di volume.
• Presa di rete (fusibile incorporato).
• Interruttore di rete.
Active versions (A):
• Built-in amplifier.
• An active processor that optimizes the specific
features of each loudspeaker and provides direct
control of the working performance of the whole
system, ensuring a constantly flat frequency response and preventing potentially harmful overloads.
• Balanced inputs with XLR male and female
sockets wired in parallel.
• Volume control.
• Power supply socket with built-in fuse.
• Mains power switch.
Versiones activas (A):
• Amplificador incorporado.
• Procesador que optimiza las características específicas de cada altavoz y controla todos los comportamientos de trabajo del sistema entero, lo que garantiza una respuesta en frecuencia constantemente lineal y protege el sistema contra sobrecargas.
• Entradas balanceadas conectadas en paralel, con
tomas XLR macho y hembra.
• Control de volumen.
• Toma de red (fusible incorporado).
• Interruptor de red.
I materiali e la costruzione rispettano i più alti standard
professionali per assicurare la massima affidabilità.
Components and construction are in line with the highest
professional standards to provide maximum reliability.
Los materiales y la construcción respetan los más elevados
estándares profesionales para asegurar la máxima fiabilidad.
CARACTÉRISTIQUES GENERALES
ALLGEMEINE EIGENSCHAFTEN
Versions passives et actives:
• Processeur audio passif qui optimise la linéarité
de la réponse et garantit le meilleur rendement du
systéme.
• Composants custom.
• Bouleau multipli à encollage phénolique.
Passive und aktive Versionen:
• Audio-Prozessor mit passiver Weiche, um die
Linearität zu optimieren und die Effektivität des
Lautsprecher-Systems zu erhöhen.
• Spezialangefertigte Komponenten.
• Mehrfach verleimte Platten aus Birkenholz.
Versions passives:
• Entrées asymétriques avec prises XLR et Jack en
parallèlè.
• Impédance standard 8 ohms pour une souplesse
de branchement maximum.
Passive Version:
• Unsymmetrische Eingänge mit
parallelgeschaltenen XLR- und Klinkenbuchsen.
• Standard 8 Ω Impedanz für höchste Anschlußflexibilität.
Versions actives (A):
• Amplificateur incorporée.
• Processeur actif qui contrôle directement tous les
comportements de rendement du systéme en
entier, qui est ainsi à l’abri de toute surcharge inutile
voir nuisible.
• Entrées symétriques avec prises XLR mâle et
femelle en parallèlè.
• Controle du volume.
• Prise secteur avec fusible incorporé.
• Interrupteur on/off.
Aktive Version (A):
• Eingebaute Endstufe.
• Ein Aktivprozessor, der nicht nur die spezifischen
Eigenschaften des jeweiligen Lautsprechers optimiert, sondern auch direkt alle Arbeitsvorgänge des
gesamten internen Systems kontrolliert und sie auf
diese Weise vor schädlichen Überlastungen schützt.
• Symmetrische Eingänge mit parallelgeschaltene
XLR-Buchsen (männlich und weiblich).
• Volumenregler.
• Netzbuchse mit eingebauter Sicherung.
• Netzschalter.
Les matériels et la construction respectent les standard
professionnels les plus élevés pour assurer une fiabilité
maximum.
Bauteile und Konstruktion erfüllen höchste professionelle
Standards und garantieren maximale Zuverlässigkeit.
315-315A
315 - 315A
driver
power capacity: 80 W
voice coil Ø: 44mm
bandwidth: 1,5 ÷ 17kHz
sensitivity 106dB
phenyl-glued
multiply birch
high frequency horn
dispersion: 90° x 60°
6" custom midrange
power capacity: 90 W
voice coil Ø: 38,5mm
bandwidth: 130÷ 7000Hz
sensitivity 100dB
transport handle
315A - active:
built-in, processor
controlled, 350 W
MosFet amplifier.
control &
connection panel
15" custom designed
high efficiency woofer
power capacity: 300 W
voice coil Ø: 64,8mm
bandwidth: 40 ÷ 3,800Hz
sensitivity 103dB
315 - passive:
control &
connection panel
speaker stand adaptor
crossover
frequency: 4,5kHz
slope: 18dB
315A
protection grid
tuning ports
315
The control and connection panel features:
The control and connection panel features:
• Volume control.
• Unbalanced XLR and Jack connectors wired in
parallel.
• Balanced XLR female (in) and male (out)
sockets, wired in parallel.
• Mains power switch.
• Power supply socket with built-in fuse.
3 / WAY SPEAKER SYSTEM
MOD.
315
LOAD
POWER
8 OHMS
400W
pin1 GND/pin2 SIG/pin3 NC
Montarbo
SERIAL N.
BANDWIDTH
40Hz - 20kHz
SPL
103dB/1W/1m
PARALLEL INPUTS
MADE IN ITALY BY
Montarbo
3 - WAY
PROCESSOR CONTROLLED
POWERED SPEAKER SYSTEM
BANDWIDTH
350W
40Hz - 20KHz
0
10
LEVEL
2
315 A
POWER
1
3
MOD.
CAUTION ! ALWAYS REPLACE FUSE
L
I
N
K
WITH SAME TYPE AND RATING
2
3
1
A V I S ! REPLACER TOUJOURS
UN FUSIBLE DE MEME CARACTERISTIQUES
BALANCED INPUT
pin1 GND pin 2
POWER
pin 3
( P.max 560W ) 230V
INPUT
50/60Hz FUSE F 3,15A
• 3-way bass reflex enclosure
• 15" high efficiency custom woofer
• 6" custom midrange
• high fraquency horn (dispersion 90° x 60°)
• Cross-over: 700Hz ÷ 3,5kHz
Note: in the applications requiring an extention of the
low frequency response, it can be combined with the
Montarbo subwoofer 118SA)
315A frequency response curve (on axis)
312-312A
312 - 312A
bullet radiator,
high frequency tweeter
phenyl-glued
multiply birch
6" custom midrange
power capacity: 100 W
voice coil Ø: 38,5mm
bandwidth: 130÷ 7000Hz
sensitivity 100dB
transport handle
312A - active:
built-in, processor
controlled, 350 W
MosFet amplifier.
control &
connection panel
protection grid
12" custom designed
high efficiency woofer
power capacity: 400 W
voice coil Ø: 64,8mm
bandwidth: 60 ÷ 5000Hz
sensitivity 102,5dB
312 - passive:
control &
connection panel
speaker stand adaptor
crossover
frequency: 3,5kHz
slope: 18dB
tuning ports
312A
312
The control and connection panel features:
The control and connection panel features:
• Volume control.
• Unbalanced XLR and Jack connectors wired in
parallel.
• Balanced XLR female (in) and male (out)
sockets, wired in parallel.
• Mains power switch.
• Power supply socket with built-in fuse.
3 / WAY SPEAKER SYSTEM
MOD.
312
LOAD
POWER
8 OHMS
400W
pin1 GND/pin2 SIG/pin3 NC
Montarbo
SERIAL N.
BANDWIDTH
45Hz - 20kHz
SPL
102,5dB/1W/1m
PARALLEL INPUTS
MADE IN ITALY BY
Montarbo
3 - WAY
PROCESSOR CONTROLLED
POWERED SPEAKER SYSTEM
312 A
BANDWIDTH
45Hz - 20KHz
0
10
LEVEL
1
3
POWER
2
MOD.
350W
CAUTION ! ALWAYS REPLACE FUSE
L
I
N
K
WITH SAME TYPE AND RATING
2
3
1
A V I S ! REPLACER TOUJOURS
UN FUSIBLE DE MEME CARACTERISTIQUES
BALANCED INPUT
pin1 GND pin 2
POWER
pin 3
( P.max 560W ) 230V
INPUT
50/60Hz FUSE F 3,15A
• 3-way bass reflex enclosure
• 12" high efficiency custom woofer
• 6" custom midrange
• bullet radiator high frequency tweeter
• Cross-over: 700Hz ÷ 4,5kHz
Note: The model 312A can be used also as mid/high
section in a biamp-configuration (optimum combination
with the Montarbo subwoofer 115SA or 118SA)
312A frequency response curve (on axis)
210-210A
210 - 210A
driver
power capacity: 80 W
voice coil Ø: 44mm
bandwidth: 1,5 ÷ 17kHz
sensitivity 106dB
transport handle
phenyl-glued
multiply birch
210A - active:
built-in, processor
controlled, 250W
MosFet amplifier.
control & connection
panel
210 - passive:
control & connection
panel
high frequency horn
dispersion: 90° x 60°
tuning ports
10" custom designed
high efficiency woofer
power capacity: 250 W
voice coil Ø: 44mm
bandwidth: 50 ÷ 5500Hz
sensitivity 101,5dB
protection grid
crossover
frequency: 1800Hz
slope: 18dB
speaker stand adaptor
210A
210
The control and connection panel features:
The control and connection panel features:
• Volume control.
• Unbalanced XLR and Jack connectors wired in
parallel.
• Balanced XLR female (in) and male (out)
sockets, wired in parallel.
• Mains power switch.
• Power supply socket with built-in fuse.
3 / WAY SPEAKER SYSTEM
MOD.
210
LOAD
POWER
8 OHMS
250W
pin1 GND/pin2 SIG/pin3 NC
Montarbo
SERIAL N.
BANDWIDTH
50Hz - 20kHz
SPL
101,5dB/1W/1m
PARALLEL INPUTS
MADE IN ITALY BY
Montarbo
2 - WAY
PROCESSOR CONTROLLED
POWERED SPEAKER SYSTEM
MOD.
210 A
POWER
BANDWIDTH
250W
50Hz - 20KHz
10
LEVEL
1
3
2
0
CAUTION ! ALWAYS REPLACE FUSE
L
I
N
K
WITH SAME TYPE AND RATING
2
3
1
A V I S ! REPLACER TOUJOURS
^
UN FUSIBLE DE MEME CARACTERISTIQUES
BALANCED INPUT
pin1 GND pin 2
POWER
INPUT
pin 3
( P.max 400W )
230V
50/60Hz
FUSE F 2A
• 2-way bass reflex enclosure
• 10" high efficiency custom woofer
• high frequency horn (dispersion 90° x 60°)
• Cross-over: 1800Hz
Note: The model 210A can be used also as mid/high
section in a biamp-configuration (for example: one 210A
with one Montarbo subwoofer 112SA or one 115SA,
two 210A with one 115SA or one 118SA)
210A frequency response curve (on axis)
315-315A /312-312A /210-210A
Technical Specifications
210 / 210A
315 / 315A
312 / 312A
_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________
___________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
•___Enclosure:
_______________________________________________________________________3-way
____________bass
_________reflex
____________________________________________________3-way
____________bass
_________reflex
_____________________________________________________2-way
____________bass
_________reflex
_________________________________________________
Power
____________handling
_______________________________________________________400
_______W
_____(continuous)
_______________________________________________________400
_______W
_____(continuous)
________________________________________________________250
_______W
____(continuous)
____________________________________________________
Impedance
___________________________________________________________________8___Ω
________________________________________________________________8___Ω
_________________________________________________________________8___Ω
____________________________________________________________
Frequency
__________________response
_________________________________________________40Hz
_________÷
____20kHz
______________________________________________________45Hz
__________÷___20kHz
_______________________________________________________50Hz
_________÷___20kHz
___________________________________________________
___________________________________________________________________bass:
_________40Hz
_________÷
____700HZ
_____________________________________________bass:
_________45Hz
__________÷___700HZ
______________________________________________bass:
_________50Hz
_________÷___1800HZ
__________________________________________
___________________________________________________________________mid:
________700Hz
____________÷___3,5kHz
____________________________________________mid:
________700Hz
____________÷___4,5kHz
_____________________________________________high:
_________1800Hz
______________÷___20kHz
_____________________________________
___________________________________________________________________high:
__________3,5kHz
____________÷___20kHz
__________________________________________high:
__________4,5kHz
____________÷___20kHz
__________________________________________________________________________________________________________
Sensitivity
__________________(1W,
_________1m)
________________________________________103dB
___________________________________________________________________102,5dB
____________________________________________________________________101,5dB
_______________________________________________________________
Max
_________SPL
__________________________________________________________129dB
___________________________________________________________________128,5dB
____________________________________________________________________126dB
_______________________________________________________________
Components
______________________(custom)
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
bass
________frequencies
___________________________________________________________15"
_______high
_________efficiency
_________________custom
_____________woofer
_____________________12"
_______high
_________efficiency
_________________custom
_____________woofer
______________________10"
_______high
________efficiency
_________________custom
_____________woofer
__________________
mid
________frequencies
___________________________________________________________6"
_____custom
_____________midrange
_________________________________________________6"
_____custom
_____________midrange
_________________________________________________________________________________________________________________
high
_________frequencies
__________________________________________________________high
_________frequency
_________________horn
_________________________________________bullet
___________radiator,
_______________high
_________frequency
_________________________________high
________frequency
__________________horn
_____________________________________
___________________________________________________________________(dispersion
___________________90°
_______x__60°)
_______________________________________tweeter
____________________________________________________________________(dispersion
___________________90°
______x___60°)
___________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
•___Connections:
________________________________________________________________2___XLR
_______+
____2___Jack
________wired
__________in
____parallel
____________________________2___XLR
_______+
____2___Jack
________wired
__________in
____parallel
_____________________________2___XLR
_______+___2___Jack
________wired
___________in
____parallel
________________________
•___Construction:
________________________________________________________________phenil-glued
______________________multiply
_______________birch
______________________________phenil-glued
______________________multiply
_______________birch
_______________________________phenil-glued
______________________multiply
_______________birch
__________________________
•___Finishing:
________________________________________________________________polyurethane
________________________resin
___________________________________________polyurethane
________________________resin
____________________________________________polyurethane
_______________________resin
________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
amplifier providing not less than...
___________________________________________________________________200
______W
____into
_______8Ω
__________________________________________________200
______W
____into
_______8Ω
___________________________________________________100
______W
___into
_______8Ω
_______________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ACTIVE
_______________VERSIONS
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Amplifier
___________________________________________________________________MosFet
_____________-__Processor
_________________controlled
___________________________________MosFet
_____________-__Processor
_________________controlled
____________________________________MosFet
_____________-__Processor
_________________controlled
_______________________________
Max
_________output
____________power
______________________________________________350
_______Watts
___________continuous
_______________/__8__Ω
____(0,1%
_________THD)
_________________350
_______Watts
___________continuous
_______________/__8__Ω
____(0,1%
_________THD)
__________________250
_______Watts
__________continuous
_______________/__8___Ω___(0,1%
_________THD)
______________
___________________________________________________________________650
_______Watts
___________peak
_________________________________________________650
_______Watts
___________peak
__________________________________________________400
_______Watts
__________peak
______________________________________________
Frequency
__________________response
_________________________________________________10Hz
_________÷
____40kHz
___________±1dB
___________________________________________10Hz
__________÷___40kHz
___________±1dB
____________________________________________10Hz
_________÷___40kHz
___________±1dB
________________________________________
Input
__________impedance
_________________________________________________________10kΩ
__________(balanced)
_________________________________________________________10kΩ
__________(balanced)
__________________________________________________________10kΩ
_________(balanced)
______________________________________________________
Input
__________sensitivity
_________________________________________________________0dB
_______(775mV)
____________________________________________________________0dB
_______(775mV)
_____________________________________________________________0dB
_______(775mV)
________________________________________________________
Connections
___________________________________________________________________Balanced
________________XLR
________female
____________(in)
_______and
_______male
_________________Balanced
________________XLR
________female
____________(in)
_______and
_______male
__________________Balanced
________________XLR
_______female
_____________(in)
______and
________male
_____________
___________________________________________________________________(out)
_________connectors,
____________________wired
___________in
____parallel.
_______________________(out)
_________connectors,
____________________wired
___________in
____parallel.
________________________(out)
_________connectors,
____________________wired
__________in
_____parallel.
___________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
•____Dimensions:
________________________________________________________________________________________50,5
___________x___71
_______x____40
_______cm
___________________________________________________________41
_______x____61
_______x____35
_______cm
________________________________________________________________33
_______x___46
_______x____32
_______cm
__________________________________________________________
_•____Weight:
_________________________________________________________________________________________________________315:
_________________28
_________kg
____________________________________________________________________________________312:
_________________23
________kg
_____________________________________________________________________________________210:
_________________17
________kg
______________________________________________________________________________
______________________________________________________________________________________________________________315A:
______________________36
________kg
_______________________________________________________________________________312A:
______________________31
________kg
_________________________________________________________________________________210A:
______________________22
________kg
_________________________________________________________________________
Note: for optimum performance we
recommend use of a power
l
tarbo sr
ica Mon
Elettron
3
1
o
ri
to
Vit
via G. di
,
Cadriano logna, Italy
I-40057
ilia, Bo
m
E
lo
ro
Grana
437
51) 7 6 6
phone (0
6
2
2
5
6
7
)
fax (051
Specifications and features are subject to change
without prior notice