Venmar_Kubix_HRV_Plus_Data_Sheet
HEAT RECOVERY VENTILATOR
VENMAR KUBIX™ HRV Plus
Controls
Part no. 44102 (TOP PORTS)
Part no. 44103 (SIDE PORTS)
This unit is very simple to operate: once it is installed, use
its push button, located on the unit top left side, to select
high speed, low speed or to stop it (the blower is off but will
turn on in response to a wall control signal). The LED (located
under the push button) will then show on which mode the
unit is in.
35 to 70 CFM (0.4 in. w.g.)
The following main wall controls are available:
- Altitude
no. 40440
- Lite-Touch Constructo
no. 40370
- Simple-Touch Constructo
no. 40390
- Constructo
no. 40350
Also, up to 5 of the following auxiliary wall controls can be
added:
- 20-min. lighted push button
no. 12030
- 20/40/60-min. push button
no. 03364
- 60-min. crank timer
no. 00910
- Dehumidistat
no. 11297
VB0143
THE KUBIX™ HRV PLUS: PERFECTION IN A CUBE!
The Kubix™ HRV Plus is the ideal choice for condominiums,
apartments and other limited space applications that require
up to 70 cfm of continuous ventilation. With its compact size
and 4-inch vertical or horizontal ports, it can be installed in
small spaces such as a closet or mechanical room above a hot
water tank.
The Kubix HRV Plus has just one blower (patent pending) and
is therefore quieter than any other similar HRV on the market.
At just 30 lb (13.6 kg), it can be installed without opening
the unit
Features pressure taps, balancing dampers, integrated
hooks and port straps to simplify installation
Removable terminal block for quicker wall control connections
ENERGY STAR® qualified
REPAIRS AND MAINTENANCE
All parts of the Kubix™ HRV Plus that could need maintenance
can be removed in less than five minutes, allowing direct
access for easy repairs. The PSC motor is permanently lubricated.
WARRANTY
The Kubix™ HRV Plus is protected by a 2-year warranty on
parts only. The heat recovery core is covered by a limited
lifetime warranty, with the original proof of purchase.
Options
Complete line of registers and diffusers
Exclusive wall mounting bracket
no. 19255
Defrosting System
The Kubix™ HRV Plus uses a unique recirculation defrost
method, which maintains balanced air pressure in the home.
If there is a call for ventilation from a wall control during the
defrost cycle, the defrost is put “on hold” while air is
exchanged, ensuring that no humid air is recirculated.
OUTSIDE
TEMPERATURE
ºC
WARMER
-5
-27
THAN
TO
DEFROST CYCLE MIN./
OPERATING MIN.
ºF
-5 WARMER
-27
AND LESS
23
-17
THAN
TO
23
-17
AND LESS
NO
DEFROST
4/20
6/15
Heat Recovery Core
Dimensions: 10" x 10" x 5.5" (25.4 cm x 25.4 cm x 14 cm)
Exchange surface: 42.3 ft² (3.9 m²)
Weight: 4 lb (1.8 kg)
Material: Polypropylene
Type: Crossflow
Warranty: Limited Lifetime
Requirements and Standards
Available at:
Complies with the UL 1812 requirements regulating the
installation of Heat Recovery Ventilators
Complies with the CSA C22.2 no. 113 Standard applicable
to ventilators
Complies with CSA C444 requirements regulating the
installation of Heat Recovery Ventilators
Technical data was obtained from published results of
tests relating to CSA C439 Standards
HVI certified and ENERGY STAR® qualified
Dimensions: Kubix™ HRV Plus (side ports)
Ø
1: FRESH AIR TO BUILDING PORT
2: EXHAUST AIR FROM BUILDING PORT
1
2
15 7/16”
19 13/16”
GROSS
SUPPLY
EXHAUST
L/ S
CFM
M³/H
L/ S
CFM
M³/H
39
37
36
34
32
30
28
26
24
82
78
76
71
68
64
59
55
51
139
133
129
121
116
109
100
93
87
42
40
39
37
35
34
31
28
26
89
86
83
78
75
71
66
60
55
151
146
141
133
127
121
112
102
93
ºC
ºF
HEATING
0
32
0
32
0
32
-25 -13
-25 -13
COOLING
35 95
AIR FLOW
20
30
38
18
30
42
64
81
39
64
71
109
138
66
109
38
52
54
42
53
-
-
-
-
2
15
1
1: FRESH AIR TO BUILDING PORT
2: EXHAUST AIR FROM BUILDING PORT
3: FRESH AIR FROM OUTSIDE PORT
4: EXHAUST AIR TO OUTSIDE PORT
7/16”
3
4
3 FT.
POWER CORD
Ø
POWER SENSIBLE APPARENT
CONSUMED RECOVERY
SENSIBLE
WATTS EFFICIENCY EFFECTIVENESS
L /S CFM M³/H
NET
15 1/16”
15 5/8”
AIR FLOW
Energy Performance
SUPPLY
TEMPERATURE
2 ³/8”
3: FRESH AIR FROM OUTSIDE PORT
4: EXHAUST AIR TO OUTSIDE PORT
4
Kubix™ HRV Plus (top ports)
Ventilation Performance
NET SUPPLY
AIR FLOW
M³/H
L/S CFM
38 81
138
37 77
131
35 75
127
33 70
119
32 68
116
30 63
107
28 59
100
25 54
92
24 50
85
3
16 5/16”
3 FT.
POWER CORD
VK0073A
EXT. STATIC
PRESSURE
PA IN. W.G.
25 0.1
50 0.2
75 0.3
100 0.4
125 0.5
150 0.6
175 0.7
200 0.8
225 0.9
4” TYP.
4” TYP.
2 3 /8 ”
LATENT RECOVERY/
MOISTURE
TRANSFER
67
77
0.00
61
71
0.00
58
65
0.00
58
79
0.02
55
70
0.01
TOTAL RECOVERY EFFICIENCY
-
18 5/8”
16 5/16”
15 1/16”
VK0074A
15 5/8”
NOTE: All specifications are subject to change without notice.
Specifications and Ratings
Model: Kubix™ HRV Plus
Part Number top ports: 44102
Part Number side ports: 44103
Total Assembled Weight (including
polypropylene core): 30 lb (13.6 kg)
Round 4" ducts
Drain: 1/2" (1.2 cm) fittings with
10 ft (3 m) PVC drain
Core filters: 2 washable Merv 6
9.2" x 14.25" x 3.8"
(23.4 cm x 36.2 cm x 9.6 cm)
Housing: Pre-painted steel
Insulation: Expanded polystyrene
Mounting: Suspension by chains and
springs or optional wall bracket
Supply & Exhaust Blower Motor: 1 motor
- Protection type: Thermally protected
- Insulation class: B
Speed Control on unit: Low & High speed
Other modes available with main and
auxiliary wall controls
Heat Recovery Core:
- Heat Exchange Surface Area:
42.3 ft² (3.9 m²)
- Type/Material: Crossflow/Polypropylene
Unit Electrical Characteristics:
Volts Frequency Ampere
Watts
120
60 Hz
0.5
60
PROJECT:
LOCATION:
MODEL
REMARKS
NO.:
QTY.:
SUBMITTED
BY:
DATE:
Residential Product Group, 550 Lemire Blvd., Drummondville, QC, Canada J2C 7W9 - Tel.: 1-800-567-3855 Fax: 1-800-567-1715
www.venmar.ca
KubixHRVPlusd110511
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement