Single Zero-Install Indoor Unit

IEEE802.16e Simple CPE
max-200m1
max-210m1
max-230m1
Specifications
WiMAX Air Interface
Filtering, Java/ActiveX/Cookie/Keyword
• Reference standard: IEEE 802.16e-2005
blocking
Provision
• Major ALG (SIP/FTP/H.323)
SOFDMA
• Radio Access Method: TDD
Hardware Specifications
• DHCP client/server/relay and PPPoE
• Frequency:
• 1 Ethernet connector: 10/100 BaseT Auto
2.500-2.700GHz (MAX-200M1)
• SIP V2 (RFC 3261) and SDP (RFC 2327)
2.300-2.400GHz (MAX-230M1)
8.75MHz/1024 FFT and 10MHz/1024FFT
(TDD SOFDMA-based 2.5GHz, 3.5GHz, 2.3GHz)
■
High Transmit Power (27dBm), 6dBi Built-in Antenna,
and External Antenna Option
■
AAS Beamforming Smart Antenna
■
802.16e Security for Authentication and Ciphering
■
QoS Management
■
One Analog Phone Connections for SIP (RFC3261) VoIP
■
One Ethernet Plug with Advanced Embedded
IP Networking Features
■
Local and Remote Control and Software Upgrade
Capabilities
Generation)
• Modulation: QPSK, 16QAM, 64QAM (DL only)
• FEC: CC (Convolutional Coding), CTC
status, LAN status, VoIP status LED
• Restore Factory Defaults/Reboot button
Power Specification
• DTMF Detection and Generation
• Fax, Modem Detection and Pass-through (T.38)
• External power supply: 18V DC
• Average power consumption in worst case
(Convolutional Turbo Code)
scenario : 10W; peak: 15W
• Smart antenna: AAS according to WiMAX
Phone Features
Forum Profile
• Caller ID and Message Waiting Indicator (RFC
• Maximum output power at antenna port:
3842)
27dBm ±1dB
• Built-in patch antenna : 6dBi, 70º azimuth, 30º
• SMA antenna connector equipped with 2dBi
omni antenna, 60º beam width by default
• Up to 5 Mbps downlink, 2 Mbps uplink for user
Benefits
The Ultimate Broadband Wireless Technology
• Security: EAP-TTLS/CHAP-based user
• Weight: 433 g
transfer (Blind and Attended Transfer)
• Early Media, Music on Hold
Environmental Specifications
• MWI (Message Waiting Indicator (RFC 3842), IVR
• Operation Temperature: 0ºC ~ 45ºC
(Interactive Voice Response)
data
Physical Specifications
• Dimension: 120 (W) x 50 (D)x160 (H) mm
• Call Waiting, Call Hold, Call Forward
(Unconditional/Busy/No Answer) and Call
elevation
• QoS management based on classification
The MAX-200M1/210M1/230M1 supports state-of-the-art IEEE 802.16e-2005
SOFDMA-based radio interface also known as WiMAX.
• Echo cancellation G.168
suppression and CNG (Comfort Noise
• Central frequency resolution: 125kHz
IEEE 802.16e-2005 WiMAX Air Interface
• LEDs : Power indication, WiMAX connection
• AD (Voice Activity Detection), Silence
(software selectable)
• 1 FXS POTS phone port for conventional phone
(RJ-11 plug)
• G.711 a/µ and G.729 codec
• Channel Bandwidth / FFT size: 5MHz / 512FFT,
■
MDI/MDIX (RJ-45 plug)
Voice over IP
3.400-3.600GHz (MAX-210M1)
Single Zero-Install Indoor Unit
• Over-the-air firmware upgrade : TR-069, Auto-
• Operation Humidity : 10% ~ 90%
(non-condensing)
NAT Traversal
• STUN (RFC 3489)
• Storage Temperature: -25ºC ~ 55ºC
authentication, CMAC message authentication,
• Outbound Proxy
• Storage Humidity: 10% ~ 95% (non-condensing)
CCM mode 128-bit AES data ciphering
• Manual configuration SIP and RTP
Built-In Internal Antenna & Flexible External Antenna
IP Networking
Management
Certification
MAX-200M1/210M1/230M1 not only provides a 6dBi antenna internally, but
also a flexible external antenna system that enables users to change higher
gain antenna easily for specific needs.
• User configurable Router (RIPv1, RIPv2) and
• Remote TFTP/HTTP Firmware Upgrade
• EMC and Safety: ETSI EN 301 489, EN 60950, CE
NAT (one-to-one, many-to-one)
• Web-based/SNMP/Telnet Management
• Embedded Security: Firewall with SPI, Content
marked for EMC and Safety
• WEEE Eco directive 2002/95/EC
SIP-Based VoIP Communication
VoIP signaling supports standard SIP (RFC3261) suitable for IP telephony
service deployments. Sophisticated voice compression and QoS mechanisms
provide toll-quality voice communication.
Application Diagram
Advanced IP Networking Features
MAX-200M1/210M1/230M1 supports advanced IP networking features,
including all security features needed to access the Internet safely.
Easy Deployment
Wi-Fi
Wi-Fi Access
MAX-200M1/210M1/230M1 is a simple box designed to be self-installable by
end users without operator involved. Rich LED bars showing the WiMAX radio
signal strength can be used to adjust the direction and position as well.
Software Upgrade Over the Air
IEEE802.16e Simple CPE
WiMAX BS
Wi-Fi
WiMAX
MAX-200M1
WiMAX Simple CPE
WiMAX
WiMAX BS
WiMAX BS
MAX-200M1
WiMAX Simple CPE
MAX-200M1/210M1/230M1 is fully configurable and software upgradeable
over the WiMAX radio interface. The upgrades and can be triggered by the
operator.
max-200m1
max-210m1
max-230m1
For more product
information, visit us on the web www.ZyXEL.com
Copyright © 2007 ZyXEL Communications Corp. All rights reserved. ZyXEL, ZyXEL logo are registered trademarks of ZyXEL Communications Corp. All other brands,
product names, or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.
02/07
IEEE802.16e Simple CPE
max-200m1
max-210m1
max-230m1
Specifications
WiMAX Air Interface
Filtering, Java/ActiveX/Cookie/Keyword
• Reference standard: IEEE 802.16e-2005
blocking
Provision
• Major ALG (SIP/FTP/H.323)
SOFDMA
• Radio Access Method: TDD
Hardware Specifications
• DHCP client/server/relay and PPPoE
• Frequency:
• 1 Ethernet connector: 10/100 BaseT Auto
2.500-2.700GHz (MAX-200M1)
• SIP V2 (RFC 3261) and SDP (RFC 2327)
2.300-2.400GHz (MAX-230M1)
8.75MHz/1024 FFT and 10MHz/1024FFT
(TDD SOFDMA-based 2.5GHz, 3.5GHz, 2.3GHz)
■
High Transmit Power (27dBm), 6dBi Built-in Antenna,
and External Antenna Option
■
AAS Beamforming Smart Antenna
■
802.16e Security for Authentication and Ciphering
■
QoS Management
■
One Analog Phone Connections for SIP (RFC3261) VoIP
■
One Ethernet Plug with Advanced Embedded
IP Networking Features
■
Local and Remote Control and Software Upgrade
Capabilities
Generation)
• Modulation: QPSK, 16QAM, 64QAM (DL only)
• FEC: CC (Convolutional Coding), CTC
status, LAN status, VoIP status LED
• Restore Factory Defaults/Reboot button
Power Specification
• DTMF Detection and Generation
• Fax, Modem Detection and Pass-through (T.38)
• External power supply: 18V DC
• Average power consumption in worst case
(Convolutional Turbo Code)
scenario : 10W; peak: 15W
• Smart antenna: AAS according to WiMAX
Phone Features
Forum Profile
• Caller ID and Message Waiting Indicator (RFC
• Maximum output power at antenna port:
3842)
27dBm ±1dB
• Built-in patch antenna : 6dBi, 70º azimuth, 30º
• SMA antenna connector equipped with 2dBi
omni antenna, 60º beam width by default
• Up to 5 Mbps downlink, 2 Mbps uplink for user
Benefits
The Ultimate Broadband Wireless Technology
• Security: EAP-TTLS/CHAP-based user
• Weight: 433 g
transfer (Blind and Attended Transfer)
• Early Media, Music on Hold
Environmental Specifications
• MWI (Message Waiting Indicator (RFC 3842), IVR
• Operation Temperature: 0ºC ~ 45ºC
(Interactive Voice Response)
data
Physical Specifications
• Dimension: 120 (W) x 50 (D)x160 (H) mm
• Call Waiting, Call Hold, Call Forward
(Unconditional/Busy/No Answer) and Call
elevation
• QoS management based on classification
The MAX-200M1/210M1/230M1 supports state-of-the-art IEEE 802.16e-2005
SOFDMA-based radio interface also known as WiMAX.
• Echo cancellation G.168
suppression and CNG (Comfort Noise
• Central frequency resolution: 125kHz
IEEE 802.16e-2005 WiMAX Air Interface
• LEDs : Power indication, WiMAX connection
• AD (Voice Activity Detection), Silence
(software selectable)
• 1 FXS POTS phone port for conventional phone
(RJ-11 plug)
• G.711 a/µ and G.729 codec
• Channel Bandwidth / FFT size: 5MHz / 512FFT,
■
MDI/MDIX (RJ-45 plug)
Voice over IP
3.400-3.600GHz (MAX-210M1)
Single Zero-Install Indoor Unit
• Over-the-air firmware upgrade : TR-069, Auto-
• Operation Humidity : 10% ~ 90%
(non-condensing)
NAT Traversal
• STUN (RFC 3489)
• Storage Temperature: -25ºC ~ 55ºC
authentication, CMAC message authentication,
• Outbound Proxy
• Storage Humidity: 10% ~ 95% (non-condensing)
CCM mode 128-bit AES data ciphering
• Manual configuration SIP and RTP
Built-In Internal Antenna & Flexible External Antenna
IP Networking
Management
Certification
MAX-200M1/210M1/230M1 not only provides a 6dBi antenna internally, but
also a flexible external antenna system that enables users to change higher
gain antenna easily for specific needs.
• User configurable Router (RIPv1, RIPv2) and
• Remote TFTP/HTTP Firmware Upgrade
• EMC and Safety: ETSI EN 301 489, EN 60950, CE
NAT (one-to-one, many-to-one)
• Web-based/SNMP/Telnet Management
• Embedded Security: Firewall with SPI, Content
marked for EMC and Safety
• WEEE Eco directive 2002/95/EC
SIP-Based VoIP Communication
VoIP signaling supports standard SIP (RFC3261) suitable for IP telephony
service deployments. Sophisticated voice compression and QoS mechanisms
provide toll-quality voice communication.
Application Diagram
Advanced IP Networking Features
MAX-200M1/210M1/230M1 supports advanced IP networking features,
including all security features needed to access the Internet safely.
Easy Deployment
Wi-Fi
Wi-Fi Access
MAX-200M1/210M1/230M1 is a simple box designed to be self-installable by
end users without operator involved. Rich LED bars showing the WiMAX radio
signal strength can be used to adjust the direction and position as well.
Software Upgrade Over the Air
IEEE802.16e Simple CPE
WiMAX BS
Wi-Fi
WiMAX
MAX-200M1
WiMAX Simple CPE
WiMAX
WiMAX BS
WiMAX BS
MAX-200M1
WiMAX Simple CPE
MAX-200M1/210M1/230M1 is fully configurable and software upgradeable
over the WiMAX radio interface. The upgrades and can be triggered by the
operator.
max-200m1
max-210m1
max-230m1
For more product
information, visit us on the web www.ZyXEL.com
Copyright © 2007 ZyXEL Communications Corp. All rights reserved. ZyXEL, ZyXEL logo are registered trademarks of ZyXEL Communications Corp. All other brands,
product names, or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.
03/07