N6/N10/N14

PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
N6/N10/N14
Free-Standing Self-Contained Milk Or Beverage Dispensers
Short Form Specifications
Exterior sides shall be 20-gauge stainless steel. Top and corner supports shall be
16-gauge stainless steel, welded, ground and polished into one integral unit.
Inner liner shall be water-tight and constructed of 22-gauge stainless steel with
a 1.25” (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-inplace polyurethane insulation with a non-conductive top breaker strip.
Refrigerated compartment is equipped with drain plumbed to a drain valve locaed
at the bottom of the counter.
Each opening shall have a stainless steel sliding lid recessed handles.
(3) stainless steel louvers shall be installed in the end and sides of the cabinet to
allow proper air flow to the condensing unit.
Each self-leveling mechanism shall be field adjustable by adding or removing
stainless steel extension springs in the elevator housing inside the unit. The
elevators shall be connected by removable platform carriers constructed of 18gauge stainless steel.
NOTE: See chart on back for crate storage capacity.
Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall be
controlled by an expansion valve. Cabinet shall maintain 36°F to 40°F (2°C to 4°C)
temperature with lids closed for storage.
Refrigeration system shall be controlled by a pressure control, located near the
condensing unit.
Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall have a 9’
(2.7m) long electrical cord and NEMA 5-15P plug. Exterior has an ON/OFF switch.
Unit shall be mounted on 6.00” (15.2cm) high adjustable stainless steel legs.
Optional Accessories and Modifications
• 4.00” (10.2cm) diameter swivel casters (two locking) with corner bumpers
(adds 2.50” (6.4cm) to overall length and depth and reduces overall height by
•
•
•
•
•
•
•
•
1.00” (2.5cm)
Heavy-duty casters (contact factory)
Corner bumpers (adds 2.50” [6.4cm] to overall length and depth)
Wrap-around bumpers (adds 1.75” [4.4cm] to overall length and depth)
Laminate panels
Fiberglass panels
Lid locking device
Special voltages (consult factory)
Dial or digital style thermometer
NOTE: This equipment is intended for storage and /or display of pre-packaged or
bottled products only.
Model N6/N10/N14
refrigerated dispensers
use HFC-134a refrigerant.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2003 The Delfield Company. All rights reserved. Printed in U.S.A.
N6/N10/N14
Free-Standing Self-Contained Milk Or Beverage Dispensers
10.50"
26.7cm
19.75"
50.2cm
16.00"
40.6cm
16.00"
40.6cm
D
36.00"
91.4cm
29.12"
74.0cm
32.00"
81.3cm
54.50"
138.4cm
D
32.00"
81.3cm
D
D=DRAIN
16.00"
40.6cm
73.00"
185.4cm
D=DRAIN
PLAN VIEW
MODEL N10-1331-34
& N10-1331-37
PLAN VIEW
MODEL N6-1331-34
& N6-1331-37
25.5”
64.77cm
D=DRAIN
PLAN VIEW
MODEL N14-1331-34
& N14-1331-37
34.75”
88.26cm
ELEVATION VIEW
MODEL N6-1331-34
& N6-1331-37
32.00"
81.3cm
43.88”
111.45cm
ELEVATION VIEW
MODEL N10-1331-34
& N10-1331-37
ELEVATION VIEW
MODEL N14-1331-34
& N14-1331-37
34.00”
86.36cm
or
37.00”
93.98cm
Drain valve with
garden hose
hookup.
6.12”
15.54cm
END VIEW
ALL N6/N10/N14 MODELS
Mechanical Data–Standard Unit
MODEL
NUMBER HEIGHT
UNIT HEIGHT
CRATE
CAPACITY
HP
AMPS
BTU
LOAD
BTU
CAPACITY
SHIP
WEIGHT
N6-1313-34
34” (83.8cm)
6
1/4
5.0
250
1170
382 lbs/ 173 kg
N6-1313-37
37” (94cm)
6
1/4
5.0
250
1170
402 lbs/ 182 kg
N10-1313-34
34” (83.8cm)
10
1/4
5.0
350
1320
545 lbs/ 247 kg
N10-1313-37
37” (94cm)
10
1/4
5.0
350
1320
565 lbs/ 256 kg
N14-1313-34
34” (83.8cm)
14
1/4
5.0
460
1420
650 lbs/ 295 kg
N14-1313-37
37” (94cm)
14
1/4
5.0
460
1420
670 lbs/ 304 kg
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2003 The Delfield Company. All rights reserved. Printed in U.S.A.
MSN6_10_14 04/03