Mitsubishi Electric PLA-ZRP.BA Series Specifications

Air-Conditioners
Indoor unit
PLA-RP.BA Series
PLA-ZRP.BA Series
OPERATION MANUAL
FOR USER
For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
BEDIENUNGSHANDBUCH
FÜR BENUTZER
Zum sicheren und einwandfreien Gebrauch der Klimaanlage dieses Bedienungshandbuch vor Inbetriebnahme
gründlich durchlesen.
MANUEL D’UTILISATION
MANUAL DE INSTRUCCIONES
PARA EL USUARIO
Lea este manual de instrucciones hasta el final antes de poner en marcha la unidad de aire acondicionado para
garantizar un uso seguro y correcto.
ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ ΧΡΗΣΕΩΣ
ΓΙΑ ΤΟΝ ΧΡΗΣΤΗ
Για ασφάλεια και σωστή χρήση, παρακαλείστε διαβάσετε προσεχτικά αυτό το εγχειρίδιο χρήσεως πριν θέσετε σε
λειτουργία τη μονάδα κλιματισμού.
Işletme Elkitabı
KULLANICI İÇİN
Emniyetli ve doğru biçimde nasıl kullanılacağını öğrenmek için lütfen klima cihazını işletmeden önce bu
elkitabını dikkatle okuyunuz.
ДЛЯ ПОЛЬЗОВАТЕЛЯ
Для обеспечения правильного и безопасного использования следует ознакомиться с инструкциями,
указанными в данном руководстве по эксплуатации, тщательным образом до того, как приступать к
использованию кондиционера.
BH79D045H04_EN.indd
1
Ελληνικά
Português
Dansk
FÖR ANVÄNDAREN
Läs denna driftsmanual noga för säkert och korrekt bruk innan luftkonditioneringen används.
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Italiano
TIL BRUGER
Læs venligst denne driftsmanual grundigt før airconditionanlægget betjenes af hensyn til sikker og korrekt brug.
DRIFTSMANUAL
Español
PARA O UTILIZADOR
Para segurança e utilização correctas, leia atentamente o manual de operação antes de pôr a funcionar a unidade de ar condicionado.
DRIFTSMANUAL
Nederlands
PER L’UTENTE
Leggere attentamente questi istruzioni di funzionamento prima di avviare l’unità, per un uso corretto e sicuro
della stessa.
MANUAL DE OPERAÇÃO
Français
VOOR DE GEBRUIKER
Voor een veilig en juist gebruik moet u deze bedieningshandleiding grondig doorlezen voordat u de airconditioner gebruikt.
ISTRUZIONI DI FUNZIONAMENTO
Deutsch
POUR L’UTILISATEUR
Pour une utilisation correcte sans risques, veuillez lire le manuel d’utilisation en entier avant de vous servir du
climatiseur.
BEDIENINGSHANDLEIDING
English
Svenska
Türkçe
Русский
2012/09/18 (火)
午後 2:44:06
Contents
1.
.
3.
4.
5.
6.
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screen Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting the Day of the Week and Time . . . . . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8. Function Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9. Emergency Operation for Wireless Remote-controller . . . . . . . . . . 18
10. Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11. Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
12. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be
recycled and/or reused. This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-oflife, should be disposed of separately from your household waste. If a chemical symbol is printed beneath the symbol (Fig. 1), this
chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration.
This will be indicated as follows: Hg: mercury (0,0005%), Cd: cadmium (0,00%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
Note
Fig.1
Note:
The phrase “Wired remote controller” in this operation manual refers only to the PAR-21MAA.
If you need any information for the other remote controller, please refer to the instruction book included in this box.
1. Safety Precautions
► Before installing the unit, make sure you read all the “Safety
Precautions”.
► The “Safety Precautions” provide very important points regarding safety. Make sure you follow them.
► Please report to or take consent by the supply authority before connection to the system.
Symbols used in the text
Warning:
Describes precautions that should be observed to prevent danger
of injury or death to the user.
Caution:
Describes precautions that should be observed to prevent damage
to the unit.
Symbols used in the illustrations
: Indicates a part which must be grounded.
Warning:
• There appliances are not accessible to the general public.
• The unit must not be installed by the user. Ask the dealer or an
authorized company to install the unit. If the unit is installed improperly, water leakage, electric shock or fire may result.
• Do not stand on, or place any items on the unit.
• Do not splash water over the unit and do not touch the unit with
wet hands. An electric shock may result.
• Do not spray combustible gas close to the unit. Fire may result.
• Do not place a gas heater or any other open-flame appliance
where it will be exposed to the air discharged from the unit. Incomplete combustion may result.
• Do not remove the front panel or the fan guard from the outdoor
unit when it is running.
• When you notice exceptionally abnormal noise or vibration, stop
operation, turn off the power switch, and contact your dealer.
• Never insert fingers, sticks etc. into the intakes or outlets.
• If you detect odd smells, stop using the unit, turn off the power
switch and consult your dealer. Otherwise, a breakdown, electric
shock or fire may result.
• This air conditioner is NOT intended for use by children or infirm
persons without supervision.
Caution:
• Do not use any sharp object to push the buttons, as this may
damage the remote controller.
• Never block or cover the indoor or outdoor unit’s intakes or outlets.
• Young children must be supervised to ensure that they do not
play with the air conditioner.
• If the refrigeration gas blows out or leaks, stop the operation of
the air conditioner, thoroughly ventilate the room, and contact
your dealer.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• When installing or relocating, or servicing the air conditioner, use
only the specified refrigerant (R410A) to charge the refrigerant
lines. Do not mix it with any other refrigerant and do not allow air
to remain in the lines.
If air is mixed with the refrigerant, then it can be the cause of abnormal high pressure in the refrigerant line, and may result in an
explosion and other hazards.
The use of any refrigerant other than that specified for the system will cause mechanical failure or system malfunction or unit
breakdown. In the worst case, this could lead to a serious impediment to securing product safety.
Disposing of the unit
When you need to dispose of the unit, consult your dealer.
2. Parts Names
■ Indoor Unit
Fan steps
Vane
Louver
Filter
Filter cleaning indication
PLA-(Z)RP.BA
4 steps
Auto with swing
–
Long-life
,500 hr
Air outlet
Vane
Filter
Air intake
BH79D045H04_EN.indd
2
2012/09/18 (火)
午後 2:44:07
2. Parts Names
■ Wired Remote-Controller
“Sensor” indication
Display Section
For purposes of this explanation,
all parts of the display are shown.
During actual operation, only the
relevant items will be displayed.
Identifies the current operation
Displayed when the remote controller
sensor is used.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
“Locked” indicator
Shows the current time, unless the simple or Auto Off
timer is set.
If the simple or Auto Off timer is set, shows the time remaining.
Indicates that remote controller buttons have been locked.
“Clean The Filter” indicator
Shows the operating mode, etc.
* Multi language display is supported.
Comes on when it is time to clean the
filter.
TIME SUN MON TUE WED THU FRI SAT
TIMER
Hr
ON
AFTER
ERROR CODE
Indicates that operation of the remote controller has been prohibited
by a master controller.
FUNCTION
FILTER
˚F˚C
˚F˚C
“Centrally Controlled” indicator
Timer indicators
AFTER OFF
WEEKLY
SIMPLE
AUTO OFF
ONLY1Hr.
The indicator comes on if the corresponding timer is set.
Fan Speed indicator
Shows the selected fan speed.
“Timer is Off” indicator
Indicates that the timer is off.
Up/Down Air Direction indicator
The indicator
shows the direction of the outcoming airflow.
“One Hour Only” indicator
Temperature Setting
Shows the target temperature.
Displayed if the airflow is set to
low and downward during COOL
or DRY mode. (Operation varies
according to model.)
The indicator goes off after 1 hour
when the airflow direction also
changes.
Room Temperature display
Shows the room temperature. The room
temperature display range is 8 - 39 °C.
The display blinks if the temperature is
less than 8 °C or 39 °C or more.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.
Louver display
Indicates the action of the swing louver.
Does not appear if the louver is stationary.
(Power On indicator)
Indicates that the power is on.
Operation Section
ON/OFF button
Set Temperature buttons
Down
Fan Speed button
Up
Timer Menu button
(Monitor/Set button)
button
Filter
(<Enter> button)
Mode button (Return button)
TEMP.
ON/OFF
Set Time buttons
Check button (Clear button)
Back
Ahead
MENU
BACK
PAR-21MAA
Timer On/Off button
(Set Day button)
Test Run button
MONITOR/SET
ON/OFF
FILTER
DAY
CLOCK
CHECK TEST
OPERATION
CLEAR
Airflow Up/Down button
Louver button
Operation button)
(
To return operation
number
Opening the
lid
Ventilation button
Operation button)
(
Built-in temperature sensor
To go to next operation number
Note:
● “PLEASE WAIT” message
●
This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power failure.
“NOT AVAILABLE” message
This message is displayed if a button is pressed to operate a function that the indoor unit does not have.
If a single remote controller is used to simultaneously operate multiple indoor units that are different models, this message will not be displayed if
any of the indoor units is equipped with the function.
3
BH79D045H04_EN.indd
3
2012/09/18 (火)
午後 2:44:07
2. Parts Names
■ Wireless Remote-Controller
Transmission area
Transmission indicator
Remote controller display
Timer indicator
*For explanation purposes, all of the items
that appear in the display are shown.
*All items are displayed when the Reset button is pressed.
Operation areas
ON/OFF button
Set Temperature buttons
Fan Speed button (Changes fan speed)
Timer Off button
Timer On button
Airflow button (Changes up/down airflow direction)
Hour button
Minute button
Mode button (Changes operation mode)
Set Time button (Sets the time)
Check button
Louver button (Changes left/right airflow direction)
Test Run button
Reset button
■ When using the wireless remote controller, point it towards the receiver on the indoor unit.
■ If the remote controller is operated within approximately minutes after power is supplied to the
indoor unit, the indoor unit may beep twice as the unit is performing the initial automatic check.
■ The indoor unit beeps to confirm that the signal transmitted from the remote controller has been
■
■
■
received. Signals can be received up to approximately 7 meters in a direct line from the indoor
unit in an area 45° to the left and right of the unit. However, illumination such as fluorescent
lights and strong light can affect the ability of the indoor unit to receive signals.
If the operation lamp near the receiver on the indoor unit is blinking, the unit needs to be inspected. Consult your dealer for service.
Handle the remote controller carefully! Do not drop the remote controller or subject it to strong
shocks. In addition, do not get the remote controller wet or leave it in a location with high humidity.
To avoid misplacing the remote controller, install the holder included with the remote controller
on a wall and be sure to always place the remote controller in the holder after use.
■ Outdoor unit
Battery installation/replacement
1. Remove the top cover, insert AAA batteries, and then install the top cover.
1
2
Top cover
3
Two AAA batteries
Insert the negative (–)
end of each battery first.
Install the batteries in
the correct directions
(+, –)!
. Press the Reset button.
Power
Press the Reset button
with an object that has
a narrow end.
Ref. Pipes
Indoor-Outdoor
Connection wire
Earth
Service Panel
4
BH79D045H04_EN.indd
4
2012/09/18 (火)
午後 2:44:07
3. Screen Configuration
Function Selection of remote
controller
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
● Function Selection of remote controller:
Set the functions and ranges available to the
remote controller (timer functions, operating
restrictions, etc.)
● Set Day/Time:
Set the current day of the week or time.
Set Day/Time
TIME SUN
Standard Control Screens
● Standard Control Screens:
˚F˚C
˚C
OFF
ON
Timer Monitor
Timer Setup
SUN MON TUE WED THU FRI SAT
MON
TIMER
OFF
˚F˚C
WEEKLY
WEEKLY
View and set the air conditioning system’s operating status
● Timer Monitor:
View the currently set timer (weekly timer,
simple timer, or Auto Off timer)
● Timer Setup:
Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
<How to change the screen>
A : Hold down both the Mode button and the Timer On/Off button for seconds.
B : Press the Timer Menu button.
C : Press the Mode (Return) button.
D : Press either of the Set Time buttons ( or ).
4. Setting the Day of the Week and Time
1
Day of the Week
& Time display
TIME SUN
TEMP.
MENU
BACK
TIME SUN
4 Time Setting
9
ON/OFF
ON/OFF
FILTER
DAY
MONITOR/SET
CHECK TEST
OPERATION
CLOCK
PAR-21MAA
2
˚C
˚C
2
3 Day of the Week Setting
4
CLEAR
1
Note:
The day and time will not appear if clock use has been disabled at Function Selection of remote controller.
1. Press the or Set Time button 1 to show display 2.
. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 :
Sun → Mon → ... → Fri → Sat.
3. Press the appropriate Set Time button 1 as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in
one-minute intervals, then in ten-minute intervals, and then in 1-hour
intervals.
4. After making the appropriate settings at Steps and 3, press the Filter
button 4 to lock in the values.
5. Operation
6
4
2
˚C
˚C
3
3
TEMP.
MENU
2
BACK
MONITOR/SET
PAR-21MAA
ON/OFF
ON/OFF
2
8
7
5
6
3
7
1
FILTER
DAY
CLOCK
5
CHECK TEST
OPERATION
7
1
5
CLEAR
8
1
3
6
5.1. Turning ON/OFF
<To Start Operation>
■ Press the ON/OFF button 1.
• The ON lamp 1 and the display area come on.
5
2
6
7
5
BH79D045H04_EN.indd
5
2012/09/18 (火)
午後 2:44:08
5. Operation
<To Stop Operation>
■ Press the ON/OFF button 1 again.
• The ON lamp 1 and the display area go dark.
Note:
Even if you press the ON/OFF button immediately after shutting down the operation is progress, the air conditioner will not start for about 3 minutes.
This is to prevent the internal components from being damaged.
5.2. Mode select
■ Press the operation mode (
) button 2 and select the opera-
tion mode 2.
Cooling mode
Drying mode
Fan mode
Heating mode <Only heat pump type>
Automatic (cooling/heating) mode <Only heat pump type>
Ventilation mode
Only indicated on the following condition
Wired remote controller used
LOSSNAY connected
Information for multi system air conditioner (Outdoor
unit: MXZ series)
► Multi system air conditioner (Outdoor unit: MXZ series) can
connect two or more indoor units with one outdoor unit. Accord
ing to the capacity, 2 or more units can operate simultaneously.
• When you try to operate or more indoor units with 1 outdoor unit simultaneously, one for the cooling and the other for heating, the operation mode of the indoor unit that operates earlier is selected. The other
indoor units that will start the operation later cannot operate, indicating
an operation state in blinking.
In this case, please set all the indoor units to the same operation
mode.
• There might be a case that the indoor unit, which is operating in (AUTO)
mode. Cannot change over to the operating mode (COOL HEAT) and
becomes a state of standby.
• When indoor unit starts the operation while the defrosting of outdoor
unit is being done, it takes a few minutes (max. about 15 minutes) to
blow out the warm air.
• In the heating operation, though indoor unit that does not operate may
get warm or the sound of refrigerant flowing may be heard, they are
not malfunction. The reason is that the refrigerant continuously flows
into it.
Automatic operation
■ According to a set temperature, cooling operation starts if the room
temperature is too hot and heating operation starts if the room temperature is too cold.
■ During automatic operation, if the room temperature changes and
remains °C or more above the set temperature for 15 minutes, the
air conditioner switches to cooling mode. In the same way, if the room
temperature remains °C or more below the set temperature for 15
minutes, the air conditioner switches to heating mode.
Cooling mode
15 minutes (switches
from heating to cooling)
Set temperature + °C
Set temperature
Set temperature - °C
15 minutes (switches
from cooling to heating)
■
Because the room temperature is automatically adjusted in order to
maintain a fixed effective temperature, cooling operation is performed
a few degrees warmer and heating operation is performed a few degrees cooler than the set room temperature once the temperature is
reached (automatic energy-saving operation).
5.3. Temperature setting
► To decrease the room temperature:
Press
button 3 to set the desired temperature.
The selected temperature is displayed 3.
► To increase the room temperature:
Press
button 3 to set the desired temperature.
The selected temperature is displayed 3.
• Available temperature ranges are as follows:
Cooling/Drying: 19 - 30 °C
Heating:
17 - 8 °C
Automatic:
19 - 8 °C
• The display blinks either 8 °C or 39 °C to inform you if the room temperature is lower or higher than the displayed temperature.
(This display does not appear on the wireless remote controller.)
5.4. Fan speed setting
■ Press the Fan Speed button 5 as many times as necessary while the
system is running.
• Each press changes the force. The currently selected speed is
shown at 5.
• The change sequence, and the available settings, are as follows.
FAN SPEED
4-speed
+
Auto
Display
Speed 1
Speed 2
Speed 3
Speed 4
Auto
Note:
● The number of available fan speeds depends on the type of unit connected.
● In the following cases, the actual fan speed generated by the unit will differ
from the speed shown the remote controller display.
1. While the display is showing “STAND BY” or “DEFROST”.
2. When the temperature of the heat exchanger is low in the heating mode.
(e.g. immediately after heating operation starts)
3. In HEAT mode, when room temperature is higher than the temperature
setting.
4. When the unit is in DRY mode.
5.5. Airflow direction setting
<To Change the Airflow’s Up/Down Direction>
■ With the unit running, press the Airflow Up/Down button 6 as necessary.
• Each press changes the direction. The current direction is shown at
6.
• The change sequence and the available settings are as follows.
Remote controller
Display
Swing
Auto
1
3
2
4
5
Wired type
Swing
1
2
3
4
Wireless type
* Note that during swing operation, the directional indication on the
screen does not change in sync with the directional vanes on the
unit.
Note:
● Available directions depend on the type of unit connected.
● In the following cases, the actual air direction will differ from the direction
indicated on the remote controller display.
1. While the display is showing “STAND BY” or “DEFROST”.
2. Immediately after starting heat mode (while the system is waiting for the
mode change to take effect).
3. In heat mode, when room temperature is higher than the temperature
setting.
6
BH79D045H04_EN.indd
6
2012/09/18 (火)
午後 2:44:08
5. Operation
< How to set the fixed up/down air direction (Only for
wired remote controller) >
Horizontal airflow
Downward
Note:
● This function cannot be set depending on the outdoor unit to be connected.
• For PLA-(Z)RP.BA series, only the particular outlet can be fixed to
certain direction with the procedures below. Once fixed, only the set
outlet is fixed every time air conditioner is turned on. (Other outlets
follow UP/DOWN air direction setting of remote controller.)
■ Explanation of word
• “Refrigerant address No.” and “Unit No.” are the numbers given to
each air conditioner.
• “Outlet No.” is the number given to each outlet of air conditioner.
(Refer to the right.)
• “Up/Down air direction” is the direction (angle) to fix.
Remote controller setting
The airflow direction of
this outlet is controlled by
the airflow direction setting of
remote contoller.
1
horizontal
2
3
4
The airflow direction of
this outlet is fixed
in particular direction.
When it is cold because of direct
airflow, the airflow direction can
be fixed horizontally to avoid
direct airflow.
Outlet No.3
Outlet No.4
MITSUBISHI
ELECTRIC
label
Outlet No.2
Reset
Fixing
Outlet No.1
Note: "0" indicates all outlets.
5
Operation buttons (During the fixed airflow direction mode)
Pressing the button with either refrigerant
address No., unit No. or outlet No. blinking, ...
ON/OFF button
TEMP.
MENU
BACK
PAR-21MAA
MONITOR/SET
Resets the fixed airflow direction mode.
Fan Speed button
Filter
button
(<Enter> button)
ON/OFF
ON/OFF
FILTER
DAY
CLOCK
CHECK TEST
OPERATION
Press for 2
seconds to
change / cancel
"Fixed airflow
direction mode".
Sends the information on
remote controller display.
CLEAR
Check button (Clear button)
·Refer to the next page for details.
Moves between the selected(blinking)
parts.
Outlet No.
Refrigerant address No.
Up/Down air direction
Set temperature buttons
Pressing the button with
Up/Down air direction indicater blinking
Attention
Mode button (Return button)
Unit No.
Only the air conditioner with the No. on remote
controller and its outlet are set to the setting 5.
(Other outlets are closed.)
It is used to identify the air conditioner and
outlet to set.
Down
Only the air conditioner with the No. on Remote controller
and its outlet are fixed at "Up/Down air direction"
blinking.
This is used only to decide direction conclusively.
Attention: Be careful not to set wrong air conditioner.
Up
Changes the selection(No.).
Unit No.
"1-4" Outlet No. Up/Down air direction Refrigerant address No.
"00-15"
"1-4"or "0"
5 steps or
cancel
7
BH79D045H04_EN.indd
7
2012/09/18 (火)
午後 2:44:09
5. Operation
< Process for setting >
[1] To turn off air conditioner and change the remote
controller to “Fixed airflow direction mode”
1.Press ON/OFF button 1 to turn off the air conditioner.
.Press Fan Speed button 2 and Filter button 3 for more than seconds simultaneously and it becomes the fixed airflow direction
mode after a while.
[4] To cancel “Fixed airflow direction mode”
1.Press ON/OFF button 1 to cancel “Fixed airflow direction mode”.
It is also canceled by pressing Fan Speed button 2 and Filter button
3 for more than seconds simultaneously.
2.Do not operate remote controller for 30 seconds after the “Fixed airflow
direction mode” is canceled. It does not accept even if it is operated.
"Fixed airflow direction mode" display
Air blows downward after it becomes
"fixed airflow direction mode".
[2] To select and identify the outlet to set
1.Press Set Temperature button 5 to change number with the outlet No.
blinking. Select outlet No. to set.
Unit No.
Outlet No.
Outlet No.3
Up/Down air direction Refrigerant address No.
Outlet No.4
MITSUBISHI
ELECTRIC
label
Outlet No.2
Outlet No.1
Note: "0" indicates
all outlets.
.Press Filter
button 3 to send the information on remote controller.
3. Wait for 15 seconds. How does the air conditioner run?
→Only the air from the selected outlet blows downward.
→Go to step[3].
→Air from the wrong outlet blows downward.
→Repeat 1 and set again.
→All outlets are closed.
→The numbers of the air conditioner (refrigerant address No.,
Unit No.) are wrong. Refer to How to find air conditioner No..
[3] To fix air direction
1.Press Mode button (Return button) 4 to blink Up/Down air direction
indicater.
.Press Set Temperature button 5 until the direction to set is chosen.
3.Press Filter button 3 to send the information on remote controller to
air conditioner.
4.Wait for 15 seconds. How does the air conditioner run?
→Airflow direction is set in the selected direction.
→The fixed setting completed (Go to step [4].)
→Airflow direction is set in the wrong direction.
→Repeat 2. and set again.
Unit No.
Outlet No. Up/Down air direction
Refrigerant address No.
Air direction changes
This indicates NO FIXED SETTING(canceled)
8
BH79D045H04_EN.indd
8
2012/09/18 (火)
午後 2:44:09
5. Operation
■ How to find air conditioner No.
Each air conditioner has its own refrigerant address No. and unit No.
(Example below).
To find air conditioner No. to set, refer to the procedures below.
Air conditioner No. is found by its airflow direction with the unit No.
changed one after the other.
Refrigerant
address
No.”00”
Unit No.”1”
Refrigerant
address
No.”01”
Unit No.””
Unit No.”1”
Unit No.””
Remote controller
As for this air conditioner,
air conditioner No. is “Unit No.1”
of refrigerant address “0”.
[2] To check by changing unit No. one after the other
(Maximum unit No. is 4)
1.Press Mode button (Return button) 4 and unit No. blinks.
Unit No.
Outlet No.
Up/Down air direction
Refrigerant address No.
Adjust to the next unit No. with Set Temperature button 5.
(refrigerant address No.00 is remained.)
. Press Filter button 3 to send the information on remote controller.
3. Wait for 15 seconds . How does the air conditioner run?
→Only air from the outlet which No. displayed on remote controller blows
downward.
→No. displayed in remote controller is air conditioner No. (Checking
completed)
→All outlets are closed.
→Repeat [1] and check. (If all the numbers are checked up to No.4
and is not found, go to [3].)
→“Err” is displayed on remote controller.
→The refrigerant address does not have further unit No.. (Go to [3].)
Err
Check from refrigerant address 00 at first.
Change to unit No.1 and check
Change to unit No.1 and check
Change to unit No.2 and check
Change to unit No.2 and check
Change to unit No.3 and check
Change to unit No.3 and check
Change to unit No.4 and check
Change to unit No.4 and check
Change to unit No.1 and check
Change to unit No.1 and check
Change to unit No.2 and check
Change to unit No.2 and check
Change to unit No.3 and check
Change to unit No.3 and check
Change to unit No.4 and check
Change to unit No.4 and check
When "Err" is displayed, refrigerant address
does not heve further "unit No.".
Change to the next "refrigerant address No..
(Refrigerant No "00"~max. No."15")
[3] To check Unit No. of following refrigerant address No.(Maximum
refrigerant address No. is 15)
1.Press Mode button (Return button) 4 to blink refrigerant address No..
Adjust refrigerant No. with Set Temperature button 5.
* By changing refrigerant address, unit No. and outlet No. turn to initial
display.
2.Go back to [2] and check Unit No. again from Unit No. 1 in order.
Unit No.
Outlet No.
Up/Down air direction
Refrigerant address No.
To clear fixed setting
To clear all fixed setting(reset to initial setting), press check button(clear
botton) 6 for more than 3 seconds in fixed airflow direction mode.
Display of remote controller blinks and the set information is cleared.
Note:
This operation clears the fixed setting information of all air
conditioner connected to the remote controller.
5.6. Ventilation
<Process to find air conditioner No.>
[1] To check refrigerant address No.00 and unit No.1
1.Press Mode button (Return button) 4 and unit No. or refrigerant
address No. blinks.
Adjust refrigerant address No. to “00” and unit No.“1” with Set
Temperature button 5.
► For LOSSNAY combination
5.6.1. For Wired Remote-controller
● To run the ventilator together with the indoor unit:
■ Press the ON/OFF button 1 .
• The Vent indication appears on the screen (at 8). The ventilator
will now automatically operate whenever the indoor unit is running.
● To run the ventilator independently:
■ Press the Mode button 2 until
appears on the display. This
will cause the ventilator to start.
Unit No.
Outlet No. Up/Down air direction
Refrigerant address No.
● To change the ventilator force:
■ Press the Ventilation button 8 as necessary.
• Each press toggles the setting, as shown below.
button 3 to send the information on remote controller.
3. Wait for 15 seconds . How does the air conditioner run?
→Only air from the outlet which No. displayed on remote controller
blows downward.
→Refrigerant address No.00 and unit No.1 are the air conditioner No..
→All outlets are closed.
→Go to step [2].
. Press Filter
Low
High
5.6.2. For Wireless Remote-controller
● The ventilator will automatically operate when the indoor unit turns on.
● No indication on the wireless remote controller.
9
BH79D045H04_EN.indd
9
2012/09/18 (火)
午後 2:44:10
6. Timer
6.1. For Wired Remote-controller
<Setting the Weekly Timer>
You can use Function Selection of remote controller to select which of
3 types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off
timer.
Shows the time
setting
5
6.1.1. Weekly Timer
SUN
ON
■ The weekly timer can be used to set up to 8 operations for each day
of the week.
• Each operation may consist of any of the following: ON/OFF time
together with a temperature setting, or ON/OFF time only, or temperature setting only.
• When the current time reaches a time set at this timer, the air conditioner carries out the action set by the timer.
■ Time setting resolution for this timer is 1 minute.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The weekly timer will not operate when any of the following conditions is
in effect.
The timer feature is off; the system is in an malfunction state; a test run
is in progress; the remote controller is undergoing self-check or remote
controller check; the user is in the process of setting a function; the user
is in the process of setting the timer; the user is in the process of setting
the current day of the week or time; the system is under central control.
(Specifically, the system will not carry out operations (unit on, unit off or
temperature setting) that are prohibited during these conditions.)
Operation No.
4
2
3
Day Setting
SUN
ON
1
C
WEEKLY
TEMP.
MENU
MONITOR/SET
BACK
3
1
2
4
ON/OFF
ON/OFF
FILTER
DAY
CHECK TEST
OPERATION
CLOCK
PAR-21MAA
0
CLEAR
1 9
2
78
<How to Set the Weekly Timer>
1. Be sure that you are at a standard control screen, and that the weekly
timer indicator 1 is shown in the display.
. Press the Timer Menu button 2, so that the “Set Up” appears on the
screen (at 2). (Note that each press of the button toggles the display
between “Set Up” and “Monitor”.)
3. Press the Timer On/Off (Set Day) button 9 to set the day. Each press
advances the display at 3 to the next setting, in the following sequence: “Sun Mon Tues Wed Thurs Fri Sat” → “Sun” → ... → “Fri” →
“Sat” → “Sun Mon Tues Wed Thurs Fri Sat”...
4. Press the
or
Operation button (7 or 8) as necessary to select
the appropriate operation number (1 to 8) 4.
* Your inputs at Steps 3 and 4 will select one of the cells from the matrix illustrated below.
(The remote-controller display at left shows how the display would
appear when setting Operation 1 for Sunday to the values indicated
below.)
Setup Matrix
Op No.
No. 1
No. •
•
•
•
•
Sunday
8:30
ON
3 °C
10:00
OFF
Monday
•
•
Shows the selected operation (ON or OFF)
* Does not appear if operation is not set.
6
10:00
OFF
...
•
•
10:00
OFF
Saturday
•
•
10:00
OFF
...
No. 8
<Operation 1 settings for Sunday>
Start the air conditioner at 8:30, with
the temperature set to 3 °C.
<Operation settings for every day>
Turn off the air conditioner at 10:00.
Note:
By setting the day to “Sun Mon Tues Wed Thurs Fri Sat”, you can set the
same operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)
C
7
WEEKLY
Shows the temperature setting
* Does not appear if temperature
is not set.
5. Press the appropriate Set Time button 1 as necessary to set the desired time (at 5).
* As you hold the button down, the time first increments in minute intervals, then in 10-minute intervals, and then in 1-hour intervals.
6. Press the ON/OFF button 1 to select the desired operation (ON or
OFF), at 6.
* Each press changes the next setting, in the following sequence: No
display (no setting) → “ON” → “OFF”
7. Press the appropriate Set Temperature button 3 to set the desired
temperature (at 7).
* Each press changes the setting, in the following sequence: No display (no setting)
4
5
...
9
30
1
...
3
No display.
(Available range: The range for the setting is 1 °C to 30 °C. The
actual range over which the temperature can be controlled, however, will vary according to the type of the connected unit.)
8. After making the appropriate settings at Steps 5, 6 and 7, press the
Filter button 4 to lock in the values.
To clear the currently set values for the selected operation, press and
quickly release the Check (Clear) button 0 once.
* The displayed time setting will change to “—:—”, and the On/Off
and temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check
(Clear) button 0 for seconds or more. The display will begin blinking, indicating that all settings have been cleared.)
Note:
Your new entries will be cancelled if you press the Mode (Return) button 2
before pressing the Filter button 4.
If you have set 2 or more different operations for exactly the same time,
only the operation with the highest Operation No. will be carried out.
9. Repeat Steps 3 to 8 as necessary to fill as many of the available cells
as you wish.
10.Press the mode (Return) button 2 to return to the standard control
screen and complete the setting procedure.
11.To activate the timer, press the Timer On/Off button 9, so that the
“Timer Off” indication disappears from the screen. Be sure that the
“Timer Off” indication is no longer displayed.
* If there are no timer settings, the “Timer Off” indication will blink on
the screen.
<How to View the Weekly Timer Settings>
8
Timer Settings
9
SUN
TIMER
ON
OFF
C
1
WEEKLY
1. Be sure that the weekly timer indicator is visible on the screen (at 1).
. Press the Timer Menu button 2 so that “Monitor” is indicated on the
screen (at 8).
3. Press the Timer On/Off (Set Day) button 9 as necessary to select the
day you wish to view.
4. Press the
or
Operation button ( 7 or 8 ) as necessary to change
the timer operation shown on the display (at 9).
* Each press will advance to the next timer operation, in order of time
setting.
5. To close the monitor and return to the standard control screen, press
the Mode (Return) button 2.
<To Turn Off the Weekly Timer>
Press the Timer On/Off button 9 so that “Timer Off” appears at
10 .
TIME SUN
10
C
C
WEEKLY
10
BH79D045H04_EN.indd
10
2012/09/18 (火)
午後 2:44:10
6. Timer
<To Turn On the Weekly Timer>
Press the Timer On/Off button 9 so that the “Timer Off” indication (at
goes dark.
10 )
TIME SUN
C
C
10
WEEKLY
6.1.2. Simple Timer
■ You can set the simple timer in any of 3 ways.
• Start time only:
The air conditioner starts when the set time has elapsed.
• Stop time only:
The air conditioner stops when the set time has elapsed.
• Start & stop times:
The air conditioner starts and stops at the respective elapsed times.
■ The simple timer (start and stop) can be set only once within a 7-hour
period.
The time setting is made in hour increments.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The simple timer will not operate when any of the following conditions
is in effect.
The timer is off; the system is in malfunction state; a test run is in progress; the remote controller is undergoing self-check or remote controller check; the user is in the process of selecting a function; the user is
in the process of setting the timer; the system is under central control.
(Under these conditions, On/Off operation is prohibited.)
4. With “ON” or “OFF” showing at 3: Press the appropriate Set Time button as necessary to set the hours to ON (if “ON” is displayed) or the
hours to OFF (if “OFF” is displayed) at 4.
• Available Range: 1 to 7 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF
setting(see step 3) and then press the Check (Clear) button 0 so that
the time setting clears to “—” at 4. (If you want to use only an ON setting or only an OFF setting, be sure that the setting you do not wish to
use is shown as “—”.)
7. After completing steps 3 to 6 above, press the Filter button 4 to lock
in the value.
Note:
Your new settings will be cancelled if you press the Mode (Return) button 2
before pressing the Filter button 4.
8. Press the Mode (Return) button 2 to return to the standard control
screen.
9. Press the Timer On/Off button 9 to start the timer countdown. When
the timer is running, the timer value is visible on the display. Be sure
that the timer value is visible and appropriate.
<Viewing the Current Simple Timer Settings>
5
6
TIMER
Timer Setting
Hr
ON
AFTER OFF
SIMPLE
Hr
ON
AFTER
SIMPLE
TEMP.
MENU
BACK
PAR-21MAA
2
ON/OFF
ON/OFF
MONITOR/SET
FILTER
DAY
OPERATION
CLOCK
1
CHECK TEST
1
2
4
0
CLEAR
4
Hr
1. Be sure that the simple timer indicator is visible on the screen (at 1).
. Press the Timer Menu button 2, so that the “Monitor” appears on the
screen (at 5).
• If the ON or OFF simple timer is running, the current timer value will
appear at 6.
• If ON and OFF values have both been set, the two values appear
alternately.
3. Press the Mode (Return) button 2 to close the monitor display and
return to the standard control screen.
<To Turn Off the Simple Timer...>
Press the Timer On/Off button 9 so that the timer setting no longer appears on the screen (at 7).
7
9
˚C
<How to Set the Simple Timer>
2
1
˚C
SIMPLE
Timer Setting
3
ON
AFTER
SIMPLE
1
Action (On or Off)
* “— —” is displayed if there is no
setting.
<To Turn On the Simple Timer...>
Press the Timer On/Off button 9 so that the timer setting becomes
visible at 7.
7
Hr
1. Be sure that you are at a standard control screen, and that the simple
timer indicator is visible in the display (at 1).
When something other than the Simple Timer is displayed, set it to
SIMPLE TIMER using the function selection of remote controller (see
8.[3] (3)) timer function setting.
. Press the Timer Menu button 2, so that the “Set Up” appears on the
screen (at 2). (Note that each press of the button toggles the display
between “Set Up” and “Monitor”.)
3. Press the ON/OFF button 1 to display the current ON or OFF simple
timer setting. Press the button once to display the time remaining to
ON, and then again to display the time remaining to OFF. (The ON/
OFF indication appears at 3).
• “ON” timer:
The air conditioner will start operation when the specified number of
hours has elapsed.
• “OFF” timer:
The air conditioner will stop operation when the specified number of
hours has elapsed.
ON
AFTER
˚C
˚C
SIMPLE
11
BH79D045H04_EN.indd
11
2012/09/18 (火)
午後 2:44:10
6. Timer
Examples
If ON and OFF times have both been set at the simple timer, operation
and display are as indicated below.
ON
At Timer Start
Display shows the timer’s ON setting (hours
remaining to ON).
Hr
At 3 hours after timer start
AFTER OFF
˚C
˚C
Display changes to show the timer’s OFF setting (hours remaining to OFF).
The time displayed is OFF setting (7 hours) –
ON setting (3 hours) = 4 hours.
SIMPLE
At 7 hours after timer start
The air conditioner goes off, and will remain
off until it is restarted.
SIMPLE
3
Timer Setting
OFF
AUTO OFF
AFTER
SIMPLE
2
AFTER
Example 1:
Start the timer with ON time set earlier than OFF time
ON Setting:
3 hours
OFF Setting:
7 hours
Hr
<How to Set the Auto Off Timer>
1
1. Be sure that you are at a standard control screen, and that the Auto
Off timer indicator is visible in the display (at 1).
When something other than the Auto Off Timer is displayed, set it to
AUTO OFF TIMER using the function selection of remote controller
(see 8.[4]-3 (3)) timer function setting.
. Hold down the Timer Menu button 2 for 3 seconds so that the “Set
Up” appears on the screen (at 2).
(Note that each press of the button toggles the display between “Set
Up” and “Monitor”.)
3. Press the appropriate Set Time button 1 as necessary to set the OFF
time (at 3).
4. Press the Filter button 4 to lock in the setting.
Note:
Your entry will be cancelled if you press the Mode (Return) button 2 before
pressing the Filter button 4.
5. Press the Mode (Return) button 2 to complete the setting procedure
and return to the standard control screen.
6. If the air conditioner is already running, the timer starts countdown
immediately. Be sure to check that the timer setting appears correctly on the display.
Example :
Start the timer with OFF time set earlier than ON time
ON Setting:
5 hours
OFF Setting:
hours
Hr
AFTER OFF
At Timer Start
˚C
˚C
Display shows the timer’s OFF setting (hours
remaining to OFF).
SIMPLE
Hr
4
At 5 hours after timer start
˚C
The air conditioner comes on and will continue to run until it is turned off.
SIMPLE
Timer Setting
AFTER
Display changes to show the timer’s ON setting (hours remaining to ON).
The time displayed is ON setting (5 hours) –
OFF setting ( hours) = 3 hours.
SIMPLE
5
TIMER
At hours after timer start
ON
AFTER
˚C
<Checking the Current Auto Off Timer Setting>
6.1.3. Auto Off Timer
■ This timer begins countdown when the air conditioner starts and shuts
OFF
1
1. Be sure that the “Auto Off” is visible on the screen (at 1 ).
. Hold down the Timer Menu button 2 for 3 seconds so that “Monitor”
is indicated on the screen (at 4).
• The timer remaining to shutdown appears at 5.
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button 2.
AUTO OFF
<To Turn Off the Auto Off Timer...>
● Hold down the Timer On/Off button 9 for 3 seconds so that “Timer
Off” appears (at 6) and the timer value (at 7) disappears.
the air conditioner off when the set time has elapsed.
■ Available settings run from 30 minutes to 4 hours in 30-minute intervals.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The Auto Off timer will not operate when any of the following conditions
is in effect.
The timer is off; the system is in malfunction state; a test run is in progress; the remote controller is undergoing self-check or remote controller check; the user is in the process of selecting a function; the user is
in the process of setting the timer; the system is under central control.
(Under these conditions, On/Off operation is prohibited.)
7
˚C
˚C
6
AUTO OFF
● Alternatively, turn
off the air conditioner itself. The timer value (at 7)
will disappear from the screen.
7
AUTO OFF
AFTER
<To Turn On the Auto Off Timer...>
● Hold down the Timer On/Off button 9 for 3 seconds. The “Timer Off”
indication disappears (at 6), and the timer setting comes on the display (at 7).
● Alternatively, turn on the air conditioner. The timer value will appear at
7.
OFF
AUTO OFF
TEMP.
MENU
BACK
PAR-21MAA
MONITOR/SET
ON/OFF
ON/OFF
FILTER
DAY
CHECK TEST
OPERATION
CLOCK
2
4
7
AFTER
CLEAR
6
2
1
˚C
OFF
˚C
AUTO OFF
9
1
BH79D045H04_EN.indd
12
2012/09/18 (火)
午後 2:44:11
6. Timer
6.2. For Wireless Remote-controller
1 Press the
AUTO STOP
or
AUTO START
button (TIMER SET).
• Time can be set while the following symbol is blinking.
OFF timer : A
is blinking.
ON timer : A
is blinking.
A
h
min
2 Use the
and
buttons to set the desired time.
3 Canceling the timer.
AUTO STOP
To cancel the OFF timer, press the
button.
AUTO START
To cancel the ON timer, press the
button.
• It is possible to combine both OFF and ON timers.
• Pressing the
ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be
used.
13
2
7. Other Functions
7.1. Locking the Remote Controller Buttons (Operation function limit controller)
■ If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of lock
to use.
(For information about selecting the lock type, see section 8, item [2]
(1)). Specifically, you can use either of the following 2 lock types.
<How to Lock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for seconds. The “Locked” indication appears on the
screen (at 1), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote controller, the screen will display the “Not Available” message when you
press the buttons as described above.
1
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2 Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
˚C
Note:
The “Locked” indicator appears on the screen to indicate that buttons are
currently locked.
˚C
FUNCTION
• If you press a locked button, the “Locked” indication (at 1) will blink
on the display.
˚C
˚C
FUNCTION
1
1
Lock Indicator
<How to Unlock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for seconds—so that the “Locked” indication disappears from the screen (at 1).
TIME SUN
˚C
TEMP.
˚C
FUNCTION
ON/OFF
1
4
1
˚C
˚C
CLEAR
13
BH79D045H04_EN.indd
13
2012/09/18 (火)
午後 2:44:11
7. Other Functions
7.2. Error Codes indication
ERROR CODE
ON/OFF
Indoor Unit’s Refriger- Error Code
ant Address
If you have entered contact number to be called in the event of a problem, the screen displays this number.
(You can set this up under Function Selection of remote controller. For information, refer to section 8.)
ON lamp
(Blinking)
Indoor Unit No.
Alternating Display
● If the ON lamp and error code are both blinking: This means that the air conditioner is out of order and operation has been stopped (and cannot resume). Take note of the indicated unit number and error code, then switch off the power to the air conditioner and call your dealer or servicer.
When the Check button is pressed:
CALL:XXXX
XXX:XXX
ERROR CODE
˚C
˚C
ON/OFF
ON/OFF
Error Code
● If only the error code is blinking (while the ON lamp remains lit): Operation is continuing, but there may be a problem with the system. In this case,
you should note down the error code and then call your dealer or servicer for advice.
* If you have entered contact number to be called in the event of a problem, push the Check button to display it on the screen. (You can set this up
under Function Selection of remote controller. For information, refer to section 8.)
8. Function Selection
Function selection of remote controller
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when
needed.
Item 1
Item Item 3 (Setting content)
1. Change Language
(“CHANGE LANGUAGE”)
Language setting to display
• Display in multiple languages is possible
. Function limit
(“FUNCTION SELECTION”)
(1)
Operation function limit setting (operation lock) (“LOCKING
FUNCTION”)
• Setting the range of operation limit (operation lock)
()
Use of automatic mode setting (“SELECT AUTO MODE”)
• Setting the use or non-use of “automatic” operation mode
(3)
Temperature range limit setting (“LIMIT TEMP FUNCTION”)
• Setting the temperature adjustable range (maximum, minimum)
(1)
Remote controller main/sub setting (“CONTROLLER MAIN/
SUB”)
• Selecting main or sub remote controller
* When remote controllers are connected to 1 group, 1 controller
must be set to sub.
()
Use of clock setting (“CLOCK”)
• Setting the use or non-use of clock function
(3)
Timer function setting (“WEEKLY TIMER”)
• Setting the timer type
(4)
Contact number setting for error situation (“CALL.”)
• Contact number display in case of error
• Setting the telephone number
(1)
Temperature display °C/°F setting (“TEMP MODE °C/°F”)
• Setting the temperature unit (°C or °F) to display
()
Room air temperature display setting (“ROOM TEMP DISP
SELECT”)
• Setting the use or non-use of the display of indoor (suction) air temperature
(3)
Automatic cooling/heating display setting (“AUTO MODE
DISP C/H”)
• Setting the use or non-use of the display of “Cooling” or “Heating” display during operation with automatic mode
3. Mode selection
(“MODE SELECTION”)
4. Display change
(“DISP MODE SETTING”)
14
BH79D045H04_EN.indd
14
2012/09/18 (火)
午後 2:44:12
8. Function Selection
[Function selection flowchart]
Setting language (English)
Normal display
(Display when the air conditioner is not running)
Hold down the button and press the button for 2 seconds.
Press the operation mode button.
Press the TIMER MENU button.
Press the TIMER ON/OFF button.
Hold down the button and press the button for 2 seconds.
Remote controller function selection mode
Item 1
Change
Language
Item 2
English
Dot display
German
Spanish
TEMP.
Russian
Italian
MENU
BACK
MONITOR/SET
PAR-21MAA
ON/OFF
ON/OFF
FILTER
DAY
CLOCK
CHECK TEST
OPERATION
CLEAR
Chinese
French
Japanese
Item 3
Function
selection
OFF
Operation lock setting is not used.
(Initial setting value)
no1
Operation lock setting is except On/Off button.
no2
Operation lock setting is all buttons.
ON
OFF
The automatic mode is not displayed when the operation mode
is selected.
The automatic mode is displayed when the operation
mode is selected. (Initial setting value)
OFF
The temperature range limit is not active. (Initial setting value)
The temperature range can be changed on cooling/dry mode.
The temperature range can be changed on heating mode.
The temperature range can be changed on automatic mode.
Automatic filter elevation panel up/down operation mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
Optional Parts (Panel) for details on operation.
Fixed airflow direction mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
indoor unit for details on operation.
The remote controller will be the main controller. (Initial setting value)
Mode
selection
The remote controller will be the sub controller.
ON
The clock function can be used. (Initial setting value)
OFF
The clock function can not be used.
Weekly timer can be used. (Initial setting value)
Auto off timer can be used.
Simple timer can be used.
Timer mode can not be used.
OFF
CALL-
The set contact numbers are displayed in case of error.
˚C
Display
mode setting
The set contact numbers are not displayed in case of error.
(Initial setting value)
The temperature unit °C is used. (Initial setting value)
˚F
The temperature unit °F is used.
ON
Room air temperature is displayed. (Initial setting value)
OFF
Room air temperature is not displayed.
ON
OFF
One of “Automatic cooling” and “Automatic heating” is displayed
under the automatic mode is running. (Initial setting value)
Only “Automatic” is displayed under the automatic mode.
15
BH79D045H04_EN.indd
15
2012/09/18 (火)
午後 2:44:12
8. Function Selection
[Detailed setting]
[4]-1 CHANGE LANGUAGE setting
The language that appears on the dot display can be selected.
• Press the [ MENU] button G to change the language.
1 English (GB), 2 German (D), 3 Spanish (E), 4 Russian (RU),
5 Italian (I), 6 Chinese (CH), 7 French (F), 8 Japanese (JP)
Refer to the dot display table.
[4]-2 Function limit
(1) Operation function limit setting (operation lock)
• To switch the setting, press the [ ON/OFF] button D.
1 no1: Operation lock setting is made on all buttons other than
the [
ON/OFF] button I.
2 no: Operation lock setting is made on all buttons.
3 OFF (Initial setting value): Operation lock setting is not made.
* To make the operation lock setting valid on the normal screen, it
is necessary to press buttons (Press and hold down the [FILTER]
A and [ ON/OFF] buttons I at the same time for seconds.)
on the normal screen after the above setting is made.
() Use of automatic mode setting
When the remote controller is connected to the unit that has automatic operation mode, the following settings can be made.
• To switch the setting, press the [ ON/OFF] button D.
1 ON (Initial setting value):
The automatic mode is displayed when the operation mode is
selected.
2 OFF:
The automatic mode is not displayed when the operation mode
is selected
.
(3) Temperature range limit setting
After this setting is made, the temperature can be changed within
the set range.
• To switch the setting, press the [ ON/OFF] button D.
1 LIMIT TEMP COOL MODE:
The temperature range can be changed on cooling/dry mode.
2 LIMIT TEMP HEAT MODE:
The temperature range can be changed on heating mode.
3 LIMIT TEMP AUTO MODE:
The temperature range can be changed on automatic mode.
4 OFF (initial setting): The temperature range limit is not active.
* When the setting other than OFF is made, the temperature
range limit setting on cooling, heating and automatic mode is
made at the same time. However, the range cannot be limited
when the set temperature range has not changed.
• To increase or decrease the temperature, press the [ TEMP.
( ) or ( )] button F.
• To switch the upper limit setting and the lower limit setting, press
the [
] button H. The selected setting will blink and the temperature can be set.
• Settable range
Cooling/Dry mode:
Lower limit:19°C - 30°C
Upper limit:30°C - 19°C
Heating mode:
Lower limit:17°C - 8°C
Upper limit:8°C - 17°C
Automatic mode:
Lower limit:19°C - 8°C
Upper limit:8°C - 19°C
[4]-3 Mode selection setting
(1) Remote controller main/sub setting
• To switch the setting, press the [ ON/OFF] button D.
1 Main:
The controller will be the main controller.
2 Sub:
The controller will be the sub controller.
() Use of clock setting
• To switch the setting, press the [ ON/OFF] button D.
1 ON:
The clock function can be used.
2 OFF:
The clock function cannot be used.
(3) Timer function setting
• To switch the setting, press the [
ON/OFF] button D (Choose
one of the followings.).
1 WEEKLY TIMER (initial setting value):
The weekly timer can be used.
2 AUTO OFF TIMER:
The auto off timer can be used.
3 SIMPLE TIMER:
The simple timer can be used.
4 TIMER MODE OFF:
The timer mode cannot be used.
* When the use of clock setting is OFF, the “WEEKLY TIMER” cannot be used.
(4) Contact number setting for error situation
• To switch the setting, press the [ ON/OFF] button D.
1 CALL OFF:
The set contact numbers are not displayed in case of error.
2 CALL **** *** ****:
The set contact numbers are displayed in case of error.
CALL_:
The contact number can be set when the display is as shown
above.
• Setting the contact numbers
To set the contact numbers, follow the following procedures.
Move the blinking cursor to set numbers. Press the [ TEMP.
( ) and ( )] button F to move the cursor to the right (left).
Press the [
CLOCK ( ) and ( )] button C to set the numbers.
[4]-4 Display change setting
(1) Temperature display °C/°F setting
• To switch the setting, press the [ ON/OFF] button D.
1 °C:
The temperature unit °C is used.
2 °F:
The temperature unit °F is used.
() Room air temperature display setting
• To switch the setting, press the [ ON/OFF] button D.
1 ON:
The room air temperature is displayed.
2 OFF:
The room air temperature is not displayed.
(3) Automatic cooling/heating display setting
• To switch the setting, press the [
ON/OFF] button D.
1 ON:
One of “Automatic cooling” or “Automatic heating” is displayed
under the automatic mode is running.
2 OFF:
Only “Automatic” is displayed under the automatic mode.
16
BH79D045H04_EN.indd
16
2012/09/18 (火)
午後 2:44:12
8. Function Selection
[Dot display table]
Selecting language
English
German
Spanish
Russian
Italian
Chinese
French
Japanese
English
German
Spanish
Russian
Italian
Chinese
French
Japanese
Waiting for start-up
Operation mode
Cool
Dry
Heat
Auto
Auto(Cool)
Auto(Heat)
Fan
Ventilation
Stand by
(Hot adjust)
Defrost
Set temperature
Fan speed
Not use button
Check (Error)
Test run
Self check
Unit function selection
Setting of ventilation
Selecting language
CHANGE LANGUAGE
Function selection
Operation function limit setting
Use of automatic mode setting
Temperature range limit setting
Limit temperature cooling/day
mode
Limit temperature heating mode
Limit temperature auto mode
Mode selection
Remote controller setting MAIN
Remote controller setting SUB
Use of clock setting
Setting the day of the week and
time
Timer set
Timer monitor
Weekly timer
Timer mode off
Auto off timer
Simple timer
Contact number setting of error
situation
Display change
Temperature display °C/°F setting
Room air temperature display
setting
Automatic cooling/heating display
setting
17
BH79D045H04_EN.indd
17
2012/09/18 (火)
午後 2:44:15
9. Emergency Operation for Wireless Remote-controller
When the remote controller cannot be used
When the batteries of the remote controller run out or the remote controller malfunctions, the emergency operation can be done using the emergency buttons on the grille.
A DEFROST/STAND BY lamp
B Operation lamp
C Emergency operation switch (heating)
D Emergency operation switch (cooling)
E Receiver
Starting operation
• To operate the cooling mode, press the
button D for more than seconds.
• To operate the heating mode, press the
button C for more than seconds.
* Lighting of the Operation lamp B means the start of operation.
Note:
• Details of emergency mode are as shown below.
Operation mode
Set temperature
Fan speed
Airflow direction
Stopping operation
• To stop operation, press the
COOL
4°C
High
Horizontal
button D or the
HEAT
4°C
High
Downward 5
button C.
10. Care and Cleaning
C
TEMP.
C
FILTER
ON/OFF
■ Indicates that the filter needs cleaning.
Ask authorized people to clean the filter.
■ When resetting “FILTER” display
When the [FILTER] button is pressed 2 times successively after
cleaning the filter, the display goes off and is reset.
Note:
When two or more different types of indoor unit are controlled, the cleaning period differs with the type of filter. When the master unit cleaning
period arrives, “FILTER” is displayed. When the filter display goes off, the
cumulative time is reset.
“FILTER” indicates the cleaning period when the air conditioner was used
under general indoor air conditions by criteria time. Since the degree of
dirtiness depends on the environmental conditions, clean the filter accordingly.
The filter cleaning period cumulative time differs with the model.
This indication is not available for wireless remote controller.
●
●
●
●
18
BH79D045H04_EN.indd
18
2012/09/18 (火)
午後 2:44:18
11. Trouble Shooting
Having trouble?
Air conditioner does not heat or cool well.
Here is the solution. (Unit is operating normally.)
■ Clean the filter. (Airflow is reduced when the filter is dirty or clogged.)
■ Check the temperature adjustment and adjust the set temperature.
■ Make sure that there is plenty of space around the outdoor unit. Is the
indoor unit air intake or outlet blocked?
When heating operation starts, warm air does not blow from the indoor
unit soon.
■ Has a door or window been left open?
■ Warm air does not blow until the indoor unit has sufficiently warmed up.
During heating mode, the air conditioner stops before the set room temperature is reached.
■ When the outdoor temperature is low and the humidity is high, frost
Airflow direction changes during operation or airflow direction cannot be
set.
■ During cooling mode, the vanes automatically move to the horizontal
When the airflow direction is changed, the vanes always move up and
down past the set position before finally stopping at the position.
■ When the airflow direction is changed, the vanes move to the set posi-
A flowing water sound or occasional hissing sound is heard.
■ These sounds can be heard when refrigerant is flowing in the air condi-
A cracking or creaking sound is heard.
■ These sounds can be heard when parts rub against each due to expan-
The room has an unpleasant odor.
■ The indoor unit draws in air that contains gases produced from the
may form on the outdoor unit. If this occurs, the outdoor unit performs
a defrosting operation. Normal operation should begin after approximately 10 minutes.
(down) position after 1 hour when the down (horizontal) airflow direction is selected. This is to prevent water from forming and dripping from
the vanes.
■ During heating mode, the vanes automatically move to the horizontal
airflow direction when the airflow temperature is low or during defrosting mode.
tion after detecting the base position.
tioner or when the refrigerant flow is changing.
sion and contraction from temperature changes.
walls, carpeting, and furniture as well as odors trapped in clothing, and
then blows this air back into the room.
A white mist or vapor is emitted from the indoor unit.
■ If the indoor temperature and the humidity are high, this condition may
occur when operation starts.
■ During defrosting mode, cool airflow may blow down and appear like a
mist.
Water or vapor is emitted from the outdoor unit.
■ During cooling mode, water may form and drip from the cool pipes and
joints.
■ During heating mode, water may form and drip from the heat exchanger.
■ During defrosting mode, water on the heat exchanger evaporates and
water vapor may be emitted.
The operation indicator does not appear in the remote controller display.
■ Turn on the power switch. “
” will appear in the remote controller dis-
play.
“
” appears in the remote controller display.
■ During central control, “
” appears in the remote controller display
and air conditioner operation cannot be started or stopped using the
remote controller.
When restarting the air conditioner soon after stopping it, it does not operate even though the ON/OFF button is pressed.
■ Wait approximately 3 minutes. (Operation has stopped to protect the air
Air conditioner operates without the ON/OFF button being pressed.
■ Is the on timer set?
conditioner.)
Press the ON/OFF button to stop operation.
■ Is the air conditioner connected to a central remote controller?
Consult the concerned people who control the air conditioner.
” appear in the remote controller display?
Consult the concerned people who control the air conditioner.
■ Has the auto recovery feature from power failures been set?
Press the ON/OFF button to stop operation.
■ Does “
Air conditioner stops without the ON/OFF button being pressed.
■ Is the off timer set?
Press the ON/OFF button to restart operation.
■ Is the air conditioner connected to a central remote controller?
Consult the concerned people who control the air conditioner.
” appear in the remote controller display?
Consult the concerned people who control the air conditioner.
■ Does “
Remote controller timer operation cannot be set.
■ Are timer settings invalid?
If the timer can be set, WEEKLY
in the remote controller display.
“PLEASE WAIT” appears in the remote controller display.
An error code appears in the remote controller display.
,
SIMPLE
, or
AUTO OFF
appears
■ The initial settings are being performed. Wait approximately 3 minutes.
■ The protection devices have operated to protect the air conditioner.
■ Do not attempt to repair this equipment by yourself.
Turn off the power switch immediately and consult your dealer. Be sure
to provide the dealer with the model name and information that appeared in the remote controller display.
19
BH79D045H04_EN.indd
19
2012/09/18 (火)
午後 2:44:18
11. Trouble Shooting
Having trouble?
Draining water or motor rotation sound is heard.
Here is the solution. (Unit is operating normally.)
■ When cooling operation stops, the drain pump operates and then stops.
Wait approximately 3 minutes.
■ The indoor operation sound level is affected by the acoustics of the
Noise is louder than specifications.
particular room as shown in the following table and will be higher than
the noise specification, which was measured in anechoic room.
Location
examples
Noise levels
High sound
Low sound
Normal rooms
absorbing rooms
absorbing rooms
Broadcasting
Reception room, Office, hotel
studio, music
hotel lobby, etc.
room
room, etc.
3 to 7 dB
6 to 10 dB
9 to 13 dB
Nothing appears in the wireless remote controller display, the display
is faint, or signals are not received by the indoor unit unless the remote
controller is close.
■ The batteries are low.
The operation lamp near the receiver for the wireless remote controller on
the indoor unit is blinking.
■ The self diagnosis function has operated to protect the air conditioner.
■ Do not attempt to repair this equipment by yourself.
Replace the batteries and press the Reset button.
■ If nothing appears even after the batteries are replaced, make sure that
the batteries are installed in the correct directions (+, –).
Turn off the power switch immediately and consult your dealer. Be sure
to provide the dealer with the model name.
12. Specifications
Model
PLA-RP35BA
PLA-RP50BA
PLA-RP60BA
Power source (voltage <V>/Frequency <Hz>)
Rated Input (Indoor only)
<kW>
Rated Current (Indoor only)
<A>
Heater
<kW>
Dimension (Height)
<mm>
Dimension (Width)
<mm>
Dimension (Depth)
<mm>
Fan airflow rate (Low-Middle2-Middle1-High)
<m3/min>
Noise level (Low -Middle-Middle1-High) <dB>
Net weight
<kg>
Model
PLA-RP71BA PLA-RP100BA PLA-RP15BA PLA-RP140BA
~/N 30/50
0.03
0.
-
0.05
0.36
-
0.05
0.36
-
0.07
0.51
-
0.14
0.94
-
0.15
1.00
98 (35)
0.16
1.07
-
0-3-6-30
-5-8-31
4-6-9-3
3-34-37-40 34-36-39-41
5 (6)
36-39-4-44
7 (6)
58 (35)
840 (950)
840 (950)
11-1-13-15
1-14-16-18
7-8-9-31 8-9-31-3
(6)
1-14-16-18
14-16-18-1
8-9-31-3 8-30-3-34
3 (6)
PLA-RP71BA PLA-RP100BA3 PLA-RP15BA
Power source (voltage <V>/Frequency <Hz>)
Rated Input (Indoor only)
<kW>
Rated Current (Indoor only)
<A>
Heater
<kW>
Dimension (Height)
<mm>
Dimension (Width)
<mm>
Dimension (Depth)
<mm>
Fan airflow rate (Low-Middle2-Middle1-High)
<m3/min>
Noise level (Low -Middle-Middle1-High) <dB>
Net weight
<kg>
Model
~/N 30/50
0.07
0.51
58 (35)
0.15
1.00
98 (35)
840 (950)
840 (950)
14-16-18-1
0-3-6-30
-5-8-31
8-30-3-34
3 (6)
3-34-37-40
6 (6)
34-36-39-41
7 (6)
PLA-ZRP35BA
PLA-ZRP50BA
PLA-ZRP60BA
Power source (voltage <V>/Frequency <Hz>)
<kW>
Rated Input (Indoor only)
Rated Current (Indoor only)
<A>
Heater
<kW>
Dimension (Height)
<mm>
Dimension (Width)
<mm>
Dimension (Depth)
<mm>
Fan airflow rate (Low-Middle2-Middle1-High)
<m3/min>
Noise level (Low -Middle-Middle1-High) <dB>
Net weight
<kg>
0.16
1.07
-
PLA-ZRP71BA
PLA-ZRP100BA PLA-ZRP15BA PLA-ZRP140BA
~/N 30/50
0.04
0.8
-
0.04
0.30
58 (35)
0.04
0.30
-
0.05
0.45
-
0.08
0.74
-
0.09
0.80
-
0.1
1.07
-
4-6-9-3
98 (35)
840 (950)
840 (950)
11-13-15-16
1-14-16-18
1-14-16-18
17-19-1-3
0-3-6-30
-5-8-31
7-8-9-31
8-9-31-3
3 (6)
8-9-31-3
8-30-34-36
5 (6)
3-34-37-40
6 (6)
34-36-39-41 36-39-4-44
7 (6)
*1 The figure in ( ) indicates Grille’s.
0
BH79D045H04_EN.indd
20
2012/09/18 (火)
午後 2:44:18
This product is designed and intended for use in the residential,
commercial and light-industrial environment.
Please be sure to put the contact address/telephone number on
this manual before handing it to the customer.
HEAD OFFICE: TOKYO BLDG., -7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
BH79D045H04
BH79D045H04_EN.indd
21
Printed in UNITED KINGDOM
2012/09/18 (火)
午後 2:44:18