Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors

Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors
Type 160 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors
The Type 160 series radial lead metallized polyester box
capacitors are constructed in rugged rectangular plastic
cases with lead spacings that are standard in the electronics industry. All Type 160 capacitors are available in bulk
with a .217” ±.039” lead length, and they are good for
general purpose applications such as bypass, decoupling,
energy storage/discharge and arc suppression.
Highlights
•
•
•
•
•
•
•
Specifications
RoHS compliant
Rugged plastic case
Case and epoxy fill meets UL94V0
10 mm through 27.5 mm lead spacings
Non-inductively wound Non-polar
Wire lead material, tinned copper clad steel
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
0.0022 µF to 10.0 µF
63 Vdc to 1000 Vdc ±5%, ±10%, ±20%
–55 ºC to +105 ºC (derating voltage to 1.25% per ºC above
85 ºC)
Dielectric Withstand Voltage: 1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC
Dissipation Factor (DF): tanδ x 10–4 at 25 ºC ±5 ºC
Total Self Inductance (L):
Long Term Stability (after two years):
Corona (Partial Discharge Inception Voltage):
kHz
C ≤1 µF
C >1 µF
1
≤100
≤100
10
≥150
Pitch (mm)
10
15
22.5
27.5
L (nH) ≈
9
10
18
18
Capacitance change ∆C/C ≤ ±3% under standard
environmental conditions
200 Vac for 100 Vdc, 200 Vdc
250 Vac for 400 Vdc, 630 Vdc
300 Vac for 1000 Vdc
Maximum Pulse Rise Time (dv/dt):
Complies with the EU Directive 2002/95/
EC requirement restricting the use of
Lead (Pb), Mercury (Hg), Cadmium
(Cd), Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB) and
PolyBrominated Diphenyl Ethers (PBDE).
Pitch (mm)
Vn
10
15
22.5
63
3
1.5
1
27.5
1
100/160
6/8
3
2
1
3
250
11
7
4
400
20
10
5.5
5
630
30
15
8
7
1000
60
25
15
10
If the working voltage (V) is less than the nominal voltage (Vn),
the capacitor can work at higher dv/dt. In this case, the maximum
value allowed is obtained by multiplying the above value with
the ratio Vn/V.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
Test Method and Performance Capacitor Outline Drawing
Insulation Resistance
T
L
Test Conditions
Max
Max
H
1 minute
Voltage Charge
50 Vdc for Vn < 100 Vdc
Performance
≥30,000 MΩ for ≤ 0.33µF
For Vn > 100 Vdc
.196 -.040 / +0.06
≥10,000 MΩ x µF for C > 0.33µF
(5.0 -1 / +1.5 mm)
≥10,000 MΩ for C ≤ 0.1µF
For Vn ≤100 Vdc
≥1,000 MΩ x µF for ≤ 0.1µF
Ød
±0.003
(±0.076 mm)
±0.016
(±0.5 mm)
25 ºC ±5 ºC
Voltage Charge Time
100 Vdc for Vn ≥ 100 Vdc
Max
S
Temperature
Damp Heat Test
Test Conditions
Note: The lead diameter is a maximum dimension
for lead spacing ≤15 mm and a nominal for lead
spacing >15 mm
Temperature
+40 ºC
Relative Humidity
95%
Test Duration
21 days
Performance
Capacitance Change ∆C/C
≤ ±5%
DF Change ∆tgδ
≤50 x 104 at 1 kHz
≥ 50% of limit value
Insulation Resistance
Life Test
Soldering
Test Conditions
Test Conditions
Soldering Temperature
260 ºC ±5 ºC
Soldering Duration
10 sec ±1 sec
Temperature
+85 ºC
Test Duration
1000 hrs
Voltage Applied
1.25 x Vn
Performance
Performance
Capacitance Change ∆C/C
≤ ±2%
DF Change ∆tgδ
≤30 x 10–4 at 10 kHz for C ≤1.0 µF
Capacitance Change ∆C/C
≤ ±5%
DF Change ∆tgδ
≤30 x 10–4 at 10 kHz for C ≤1.0 µF
≤20 x 10–4 at 1 kHz for C >1.0 µF
≤20 x 10 at 1 kHz for C >1.0 µF
–4
≥ 50% of limit value
Insulation Resistance
RoHS Compliant
Ratings
Cap
(µF)
Catalog
Part Number
L
T
Inches
H
.22
.27
.33
.39
.47
.56
.68
.68
.82
.82
1.0
1.5
2.2
3.3
4.7
6.8
10.0
160224*63D–F
160274*63D–F
160334*63E–F
160394*63E–F
160474*63E–F
160564*63D–F
160684*63D–F
160684*63G–F
160824*63E–F
160824*63H–F
160105*63H–F
160155*63G–F
160225*63H–F
160335*63M–F
160475*63N–F
160685*63O–F
160106*63P–F
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.709
0.512
0.709
0.709
0.709
0.709
1.043
1.043
1.043
1.260
0.157
0.157
0.157
0.157
0.197
0.197
0.197
0.236
0.236
0.197
0.197
0.236
0.295
0.276
0.335
0.394
0.433
0.374
0.374
0.374
0.374
0.433
0.433
0.433
0.472
0.472
0.433
0.433
0.472
0.531
0.650
0.669
0.748
0.787
S
Ød
63 Vdc
0.394 0.031
0.394 0.031
0.394 0.031
0.394 0.031
0.394 0.031
0.394 0.031
0.394 0.031
0.591 0.031
0.394 0.031
0.591 0.031
0.591 0.031
0.591 0.031
0.591 0.031
0.886 0.031
0.886 0.031
0.886 0.031
1.083 0.031
L
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
13.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
Millimeters
T
H
S
5.0
5.0
6.0
6.0
6.0
5.0
5.0
6.0
6.0
7.5
7.5
6.0
7.5
10.0
8.5
10.0
13.0
11.0
11.0
12.0
12.0
12.0
11.0
11.0
12.0
12.0
13.5
13.5
12.5
14.0
16.0
17.0
19.0
23.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
Ød
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
RoHS Compliant
Cap
(µF)
Catalog
Part Number
L
T
Inches
H
S
100 Vdc
.10
160104*100C–F
0.512
0.157
0.374
0.394
.12 160124*100C–F
0.512
0.157
0.374
0.394
.15 160154*100C–F
0.512
0.157
0.374
0.394
.18 160184*100C–F
0.512
0.157
0.374
0.394
.22 160224*100D–F
0.512
0.197
0.433
0.394
.27 160274*100D–F
0.512
0.197
0.433
0.394
.33 160334*100E–F
0.512
0.236
0.472
0.394
.33 160334*100F–F
0.709
0.197
0.433
0.591
.39 160394*100E–F
0.512
0.236
0.472
0.394
.39 160394*100F–F
0.709
0.197
0.433
0.591
.47 160474*100E–F
0.512
0.236
0.472
0.394
.47 160474*100F–F
0.709
0.197
0.433
0.591
.56 160564*100G–F
0.709
0.236
0.472
0.591
.68 160684*100G–F
0.709
0.236
0.472
0.591
.82 160824*100H–F
0.709
0.295
0.531
0.591
1.0 160105*100H–F
0.709
0.295
0.531
0.591
1.5 160155*100M–F
1.043
0.276
0.650
0.886
2.2 160225*100N–F
1.043
0.335
0.669
0.886
3.3 160335*100O–F
1.043
0.394
0.748
0.886
4.7 160475*100P–F
1.260
0.433
0.787
1.083
6.8 160685*100Q–F
1.260
0.512
0.886
1.083
10.0 160106*100S–F
1.457
0.709
1.299
1.083
160 Vdc
.10
160104*160C–F
0.512
0.157
0.374
0.394
250 Vdc
.033 160333*250C–F
0.512
0.157
0.374
0.394
.039 160393*250C–F
0.512
0.157
0.374
0.394
.047 160473*250C–F
0.512
0.157
0.374
0.394
.056 160563*250C–F
0.512
0.157
0.374
0.394
.068 160683*250C–F
0.512
0.157
0.374
0.394
.082 160823*250D–F
0.512
0.197
0.433
0.394
.10 160104*250D–F
0.512
0.197
0.433
0.394
.10 160104*250F–F
0.709
0.197
0.433
0.591
.12 160124*250D–F
0.512
0.236
0.472
0.394
.12 160124*250F–F
0.709
0.197
0.433
0.591
.15 160154*250E–F
0.512
0.236
0.472
0.394
.15 160154*250F–F
0.709
0.197
0.433
0.591
.18 160184*250E–F
0.512
0.236
0.472
0.394
.18 160184*250F–F
0.709
0.197
0.433
0.591
.22 160224*250F–F
0.709
0.197
0.433
0.591
.27 160274*250G–F
0.709
0.236
0.472
0.591
.33 160334*250G–F
0.709
0.236
0.472
0.591
.39 160394*250H–F
0.709
0.295
0.531
0.591
.47 160474*250H–F
0.709
0.295
0.531
0.591
.47 160474*250L–F
1.043
0.236
0.591
0.886
.56 160564*250I–F
0.709
0.335
0.571
0.591
.56 160564*250M–F
1.043
0.276
0.650
0.886
.68 160684*250I–F
0.709
0.335
0.571
0.591
.68 160684*250M–F
1.043
0.276
0.650
0.886
.82 160824*250M–F
1.043
0.335
0.669
0.886
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
Ød
L
T
Millimeters
H
S
Ød
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
13.0
18.0
13.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
32.0
32.0
37.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
5.0
6.0
5.0
6.0
5.0
6.0
6.0
7.5
7.5
7.0
8.5
10.0
11.0
13.0
18.0
9.5
9.5
9.5
9.5
11.0
11.0
12.0
11.0
12.0
11.0
12.0
11.0
12.0
12.0
13.5
13.5
16.5
17.0
19.0
20.0
22.5
33.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
15.0
10.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
27.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.031
13.0
4.0
9.5
10.0
0.8
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
13.0
18.0
13.0
18.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
18.0
26.5
18.0
26.5
26.5
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
6.0
5.0
6.0
5.0
6.0
5.0
5.0
6.0
6.0
7.5
7.5
6.0
8.5
7.0
8.5
7.0
8.5
9.5
9.5
9.5
9.5
9.5
11.0
11.0
11.0
12.0
11.0
12.0
11.0
12.0
11.0
11.0
12.0
12.0
13.5
13.5
15.0
14.5
16.5
14.5
16.5
17.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
15.0
10.0
15.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
15.0
22.5
15.0
22.5
22.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
RoHS Compliant
Cap
(µF)
Catalog
Part Number
L
T
Inches
H
1.0
1.5
2.2
3.3
4.7
6.8
160105*250N–F
160155*250O–F
160225*250P–F
160335*250Q–F
160475*250R–F
160685*250S–F
1.043
1.043
1.260
1.260
1.260
1.457
0.335
0.394
0.433
0.512
0.591
0.709
0.669
0.748
0.787
0.886
1.181
1.299
.012
.015
.018
.022
.027
.033
.039
.047
.047
.056
.068
.082
.10
.12
.15
.15
.18
.22
.27
.33
.39
.47
.56
.68
.82
1.0
1.0
160123*400C–F
160153*400C–F
160183*400C–F
160223*400C–F
160273*400C–F
160333*400D–F
160393*400D–F
160473*400E–F
160473*400F–F
160563*400F–F
160683*400F–F
160823*400F–F
160104*400G–F
160124*400G–F
160154*400H–F
160154*400L–F
160184*400L–F
160224*400L–F
160274*400M–F
160334*400M–F
160394*400N–F
160474*400N–F
160564*400O–F
160684*400P–F
160824*400P–F
160105*400P–F
160105*400Q–F
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.709
0.709
0.709
0.709
0.709
0.709
0.709
1.043
1.043
1.043
1.043
1.043
1.043
1.043
1.043
1.260
1.260
1.260
1.260
0.157
0.157
0.157
0.157
0.157
0.197
0.197
0.236
0.197
0.197
0.197
0.197
0.236
0.236
0.295
0.236
0.236
0.236
0.276
0.276
0.335
0.335
0.394
0.433
0.433
0.433
0.512
0.374
0.374
0.374
0.374
0.374
0.433
0.433
0.472
0.433
0.433
0.433
0.433
0.472
0.472
0.531
0.591
0.591
0.591
0.650
0.650
0.669
0.669
0.748
0.787
0.787
0.787
0.886
.0039
.0047
.0056
.0068
.0082
.010
.012
.015
.018
.022
.027
.033
.039
.047
.056
160392*630C–F
160472*630C–F
160562*630C–F
160682*630C–F
160822*630C–F
160103*630C–F
160123*630D–F
160153*630D–F
160183*630D–F
160223*630E–F
160273*630F–F
160333*630F–F
160393*630G–F
160473*630G–F
160563*630G–F
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.709
0.709
0.709
0.709
0.709
0.157
0.157
0.157
0.157
0.157
0.157
0.197
0.197
0.197
0.236
0.197
0.197
0.236
0.236
0.236
0.374
0.374
0.374
0.374
0.374
0.374
0.433
0.433
0.433
0.472
0.433
0.433
0.472
0.472
0.472
S
250 Vdc
0.886
0.886
1.083
1.083
1.083
1.083
400 Vdc
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.591
0.591
0.591
0.591
0.591
0.886
0.886
0.886
0.886
0.886
0.886
0.886
0.886
1.083
1.083
1.083
1.083
630 Vdc
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.591
0.591
0.591
Ød
L
T
Millimeters
H
S
Ød
0.031
0.031
0.031
0.031
0.031
0.031
26.5
26.5
32.0
32.0
32.0
37.0
8.5
10.0
11.0
13.0
15.0
18.0
17.0
19.0
20.0
22.5
30.0
33.0
22.5
22.5
27.5
27.5
27.5
27.5
0.8
0.8
0.8
0.8
0.8
0.8
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
5.0
5.0
5.0
5.0
6.0
6.0
7.5
6.0
6.0
6.0
7.0
7.0
8.5
8.5
10.0
11.0
11.0
11.0
13.0
9.5
9.5
9.5
9.5
9.5
11.0
11.0
12.0
11.0
11.0
11.0
11.0
12.0
12.0
13.5
15.0
15.0
15.0
16.5
16.5
17.0
17.0
19.0
20.0
20.0
20.0
22.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
6.0
5.0
5.0
6.0
6.0
6.0
9.5
9.5
9.5
9.5
9.5
9.5
11.0
11.0
11.0
12.0
11.0
11.0
12.0
12.0
12.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
RoHS Compliant
Cap
(µF)
Catalog
Part Number
L
T
Inches
H
S
630 Vdc
.068 160683*630H–F
0.709
0.295
0.531
0.591
.068 160683*630L–F
1.043
0.236
0.591
0.886
.082 160823*630L–F
1.043
0.236
0.591
0.886
.10 160104*630L–F
1.043
0.236
0.591
0.886
.12 160124*630M–F
1.043
0.276
0.650
0.886
.15 160154*630M–F
1.043
0.276
0.650
0.886
.18 160184*630N–F
1.043
0.335
0.669
0.886
.22 160224*630N–F
1.043
0.335
0.669
0.886
.27 160274*630Q–F
1.260
0.512
0.886
1.083
.33 160334*630P–F
1.260
0.433
0.787
1.083
.39 160394*630P–F
1.260
0.433
0.787
1.083
.47 160474*630Q–F
1.260
0.512
0.886
1.083
1000 Vdc
.0022 160222*1000C–F
0.512
0.157
0.374
0.394
.0027 160272*1000C–F
0.512
0.157
0.374
0.394
.0033 160332*1000C–F
0.512
0.157
0.374
0.394
.0039 160392*1000D–F
0.512
0.197
0.433
0.394
.0047 160472*1000D–F
0.512
0.197
0.433
0.394
.0056 160562*1000D–F
0.512
0.197
0.433
0.394
.0068 160682*1000D–F
0.512
0.197
0.433
0.394
.0082 160822*1000D–F
0.512
0.197
0.433
0.394
.010 160103*1000F–F
0.709
0.197
0.433
0.591
.012 160123*1000F–F
0.709
0.197
0.433
0.591
.015 160153*1000F–F
0.709
0.236
0.472
0.591
.018 160183*1000G–F
0.709
0.236
0.472
0.591
.022 160223*1000G–F
0.709
0.236
0.472
0.591
.027 160273*1000H–F
0.709
0.295
0.531
0.591
.033 160333*1000L–F
1.043
0.236
0.591
0.886
.039 160393*1000L–F
1.043
0.236
0.591
0.886
.047 160473*1000L–F
1.043
0.236
0.591
0.886
.056 160563*1000M–F
1.043
0.276
0.650
0.886
.068 160683*1000M–F
1.043
0.276
0.650
0.886
.082 160823*1000N–F
1.043
0.335
0.669
0.886
.10 160104*1000N–F
1.043
0.335
0.669
0.886
.12 160124*1000O–F
1.043
0.394
0.748
0.886
.15 160154*1000P–F
1.260
0.433
0.787
1.083
.18 160184*1000Q–F
1.260
0.512
0.886
1.083
.22 160224*1000Q–F
1.260
0.512
0.886
1.083
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
Ød
L
T
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
7.5
6.0
6.0
6.0
7.0
7.0
8.5
8.5
13.0
11.0
11.0
13.0
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
7.5
6.0
6.0
6.0
7.0
7.0
8.5
8.5
10.0
11.0
13.0
13.0
Millimeters
H
S
Ød
13.5
15.0
15.0
15.0
16.5
16.5
17.0
17.0
22.5
20.0
20.0
22.5
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
9.5
9.5
9.5
11.0
11.0
11.0
11.0
11.0
11.0
11.0
12.0
12.0
12.0
13.5
15.0
15.0
15.0
16.5
16.5
17.0
17.0
19.0
20.0
22.5
22.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
Part Numbering System
160
104
K
100
C
Case
ROHS
Series
Capacitance
Tolerance
Voltage
Code
Compliant
160
392 = .0039 µF
J = ±5%
100 = 100 Vdc
C
103 = .01 µF
K = ±10%
250 = 250 Vdc
D
104 = .1 µF
M = ±20%
630 = 630 Vdc
E
105 = 1.0 µF
1000 = 1000 Vdc
–F
F
etc.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement