Advertisement
Advertisement
(NL) Gebruikte symbolen (GB) Safety Precautions / (FR) Symboles utilisés / (DE) Verwendete Symbole / (PL) Stosowane symbole / (NO) Brukte symboler / (DK) Brugte symboler / (SE) Anuända symboler / (FI) Käytetyt symbolit ./ (IT) Simboli usati / (ES) Simbolos empleados (CZ) Použité symboly / (PT) Símbolos uilizados / (GR) 220-240V~ 50Hz IP20 Max. ¡ø45mm 2x E27 Max. 40W Kasbah HL 50 Gold WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN. 97801 34 & 4 2&3 5 5 6 7 7 7 6 6 7 Assembly: 1. Shut off main electrical supply. 2. & 3. Use screws to mount the bracket on the ceiling. 4. Connect the electrical cable provided with the lamp with the mains wire. 5. Install the ceiling canopy on the mounting bracket using the two canopy screws. 6. This lamp has a centre body comprising of 2 lamp holders which takes 2x E27 Bulbs. Install the 2 bulbs on the lamp holders. 7. Carefully use the set screws provided with the lamp to install the Crystal fitting on the top gallery. 8. Once the fitting is complete as shown in the below image, power on the Chandelier for use. ">

Public link updated
The public link to your chat has been updated.
Advertisement