AMX | DXLink Multi-Format MMF-D | Data Sheet - DXLink Multi-Format Multimode Fiber Transmitter, Duplex

DATA SHEET
DXLink Multi-Format Multimode Fiber
Transmitter, Duplex
TM
DXLF-MFTX-MM-D (FG1010-362)
Overview
The DXLink Multi-Format Fiber Transmitter sends analog and digital audio and video signals
including HDMI with HDCP up to 300 meters over multimode fiber. Use the DXLink Fiber
Transmitter in conjunction with the Enova DGX 8, 16, 32 or 64 to transmit clear,
uncompressed video at the fastest data rate in the industry – 10 Gbps. The DXLF-MFTXMM-D also sends and receives control commands from the Enova DGX Digital Media
Switcher with integrated NetLinx providing a total control and distribution solution to all
end points.
COMMON APPLICATIONS
The ideal entry-point for any source designed into an Enova DGX integrated system that requires the distance
capabilities and inherent security of fiber – or both; including campus-wide distribution of sources that are shared
between classrooms, secure military applications, casinos, arenas and museums. Directly connect video sources
such as PCs using the HD-15 multi-format input connection or HDMI input and easily include audio on the same
fiber cable by using the stereo or digital audio connection.
FEATURES

HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 300 m

Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps

Secure and Isolated – Fiber inherently provides extra security and electrical isolation making it the transport
method of choice for many mission-critical secure environments

InstaGate Pro® Technology – Easily integrate HDCP into system designs and enjoy hassle free matrix
switching to all compliant displays, no tools, no delays and no key constraints – it just works

Native NetLinx® Control Everywhere – Control connected source devices using the built-in IR and RS-232
ports

Field Serviceable Fiber Modules – Easily remove and replace SFP modules in the field

Multi-Format Analog Port and HDMI Port – Supports legacy analog signals – RGBHV, Component, S-Video,
and Composite, and digital HDMI/HDCP, DisplayPort and DVI signals

Ethernet Connectivity – Provides ICSLan Ethernet support at the Transmitter – add Ethernet connectivity to a
Touch Panel, plug in a WAP or stream IP audio/video to a Ethernet enabled source device
© 2013 AMX. All rights reserved.
SPECIFICATIONS
GENERAL
Dimensions (HWD)
Weight
Shipping Weight
MTBF
Noise Level
Airflow
Mounting Options
Regulatory Compliance
Included Accessories
Optional Accessories
Compatible AMX Products
1” x 8 3/4” x 5 1/5” (2.54 x 22.12 cm x 13.08 cm)
Approximately 1.1 lb (0.50 kg)
Approximately 2.2 lb (1 kg)
124,232 hours
TBA
TBA
Compatible V Style mounting options:
•AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack
Mounting Tray with Fill Plates (FG1010-721)
•AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting
Tray (FG1010-720)
•AVB-VSTYLE-SURFACE-MNT, V Style Single Module
Surface Mount Brackets (FG1010-722)
•AVB-VSTYLE-POLE-MNT, V Style Single Module Pole
Mounting Kit (FG1010-723)
•Class 1 Eye safe per requirements of IEC 60825-1 /
CDRH
•RoHS / WEEE Compliant
Ships with a desktop power supply with power cord
•AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack
Mounting Tray with Fill Plates (FG1010-721)
•AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting
Tray (FG1010-720)
•AVB-VSTYLE-SURFACE-MNT, V Style Single Module
Surface Mount Brackets (FG1010-722)
•AVB-VSTYLE-POLE-MNT, V Style Single Module Pole
Mounting Kit (FG1010-723)
•CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
•IR03, External IR Receiver Module (FG-IR03)
•Enova DGX 8/16/32/64 Digital Media Switchers with
ENOVADGX-VI-DXLINK-MMF-D, Enova DGX DXLink
Mutimode Fiber Input Board, Duplex (FG1058-622)
installed
ACTIVE POWER REQUIREMENTS
AC Power
Power Consumption (Max)
Power Connector
TBA
TBA
TBA
POWER SUPPLY
External, Included
Each Multi-Format TX ships with a desktop power
supply with power cord
ENVIRONMENTAL
Temperature (Operating)
Temperature (Storage)
Humidity (Operating)
Humidity (Storage)
Heat Dissipation (On)
32° to 104° F (0° to 40° C)
-22° to 158° F (-30° to 70° C)
5% to 85% RH (non-condensing)
0% to 90% RH (non-condensing)
TBA
2
ETHERNET
Ethernet Connection
(1) RJ-45, TCP/IP Port (ICS LAN 10/100)
DXLINK FIBER
Fiber Connector
Fiber Cable Type
Fiber Cable Length
Transport Layer Throughput
Fiber Transceiver Type
Optical Wavelength
Optical Budget
LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS
10A)
OM3 50/125µm
300m (984 ft)
10.3125 Gbps
10G SFP+
850 nm
6.8 dB (typical), 3.2 dB (stressed) between DXLink
Fiber Transceivers
Optical Modulation Amplitude (OMA): -4.3 dBm (min)
Optical Transceiver Mean
Optical Modulation Amplitude (OMA) Sensitivity: -11.1
dBm (typ), -7.5 dBm (stressed)
-1 dBm (average power)
HDMI
Input Connector
Compatible Formats
Signal Type Support
Local Loopback Output Connector
Progressive Resolution Support
Interlaced Resolution Support
3D Format Support
Deep Color Support
Color Space Support
HDCP Support
(1) HDMI Type A Female
HDMI, HDCP , DVI
HDMI
DVI-D (single link with HDMI cable adapter)
DisplayPort ++ (Input Only, with HDMI or DVI cable
adapter)
(1) HDMI Type A Female Local Loopback Output, +5 V
DDC Pin Output 55 mA, non-scaling
480p up to 1920x1200 @ 60 Hz (including but not
limited to those resolutions shown in the “Instruction
Manual – DXLink Fiber Transmitters and Receivers”
480i, 576i, 1080i (including but not
limited to those resolutions shown in the “Instruction
Manual – DXLink Fiber Transmitters and Receivers”
Note-Reminder: Interlace video supported into the
Transmitter, progressive only supported out of the
Receiver unless in non-scaling Bypass
Yes, if Scaler on corresponding output board or DXLink
Fiber RX is set to Bypass mode
Frame Packing 1080p 24Hz
Frame Packing 720p 50/60Hz
Frame Packing 1080i 50/60Hz
Top-Bottom 1080p 24Hz
Top-Bottom 720p 50/60Hz
Side-by-Side Half 1080i 50/60Hz
24-bit, 30-bit, 36-bit
30-bit and 36-bit supported when the HDMI DXLink
RX Scaler is in Bypass mode and format is 1080p60 or
less
RGB 4:4:4
YCbCr 4:4:4 and 4:2:2
(Input signal support for YCbCr 4:4:4 and 4:2:2, output
color-space is converted to RGB 4:4:4)
Yes
3
CEC Support
DDC/EDID Support
Propagation Delay (Typical)
Input Voltage (Nominal)
Input Re-clocking (CDR)
Input Equalization
Video Data Rate (Max)
Video Pixel Clock (Max)
Audio Format Support
Audio Resolution
Audio Sample Rate
Local Audio Support
Supports AMX HDCP InstaGate Pro Technology
When used with an Enova DGX Digital Media Switcher
the key support is up to 16 sinks per output,
independent of source device
None
When used with Enova DGX 8/16/32/64 Digital Media
Switchers the HDMI and VGA EDID is passed from
the Enova Switcher input to the TX and is user reprogrammable, see the "Enova DGX Digital Media
Switcher Instruction Manual" for supported EDID
resolutions for each board type
4.8 us
1.0 Vpp Differential
Yes
Yes, Adaptive
4.95 Gbps / 6.75 Gbps
6.75 Gbps supported if Scaler on corresponding output
board or DXLink Fiber RX is set to Bypass mode and
format is 1080p60 or less
165 MHz / 225 MHz
225 MHz supported if Scaler on corresponding output
board or DXLink Fiber RX is set to Bypass mode and
format is 1080p60 or less
Dolby TrueHD, Dolby Digital, DTS-HD Master Audio,
DTS, 2 CH through 8 CH L-PCM Dolby Digital and DTS
support up to 48kHz, 5.1 channels
16 bit to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
Insertion
ANALOG VIDEO
Input Connector
Compatible Formats
Progressive Resolution Support
Interlaced Resolution Support
Auto-Adjust Input
RGB Input Signal Level Range
RGB Input Impedance
HV Sync Input Signal Level Range
HV Sync Input Impedance
Digital Processing
Y/Pb/Pr Input Signal Level Range
Y/Pb/Pr Input Impedance
Y/c (S-Video) Input Signal Level Range
Y/c (S-Video) Input Impedance
C (Composite) Input Signal Level Range
C (Composite) Input Impedance
(1) HD-15, breakout cable required for RGB formats
RGBHV, RGBs, RGsB
YPbPr (HDTV)
Y/c (S-Video), C (Composite)
480p up to 1920x1200 @ 60 Hz including but not
limited to those resolutions shown in the “Instruction
Manual – DXLink Fiber Transmitters and Receivers”
480i, 576i, 1080i including but not limited to those
resolutions shown in the “Instruction
Manual – DXLink Fiber Transmitters and Receivers”
If input is interlaced, all scaled outputs will deinterlace
video to a progressive resolution format. If in scaler
Bypass mode interlaced input will pass through
Supported
1 Vpp nominal
75 Ω
2 to 5 Vpp
2.5 pF Typ, 10 pF Max
24 bit, 165 MHz
1.0 Vpp for Y, 700 mVpp for Pb Pr
75 Ω
1.0 Vpp for Y, 1.0 Vpp for c
75 Ω
1.0 Vpp
75 Ω
4
S/PDIF DIGITAL AUDIO
Input Connector
Input Signal Types
S/PDIF Audio Format Support
S/PDIF Resolution
S/PDIF Sample Rate
S/PDIF Input Signal Level Range
S/PDIF Input Impedance
Analog to Digital Reference Level
(1) RCA Jack, video signal must be present to pass
audio
S/PDIF, video signal must be present to pass audio
Dolby Digital, DTS, 2 CH L-PCM
Dolby Digital and DTS support up to 48kHz, 5.1
channels
16 to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
200 mVpp to 600 mVpp terminated
75 Ω
TBA
ANALOG AUDIO
Input Connector
Input Signal Types
Analog Input Level (Max)
Analog Input Impedance
Analog to Digital Conversion
Analog to Digital Reference Level
(1) 3.5mm mini-stereo jack, video must be present to
pass audio
Stereo analog, video must be present to pass audio
TBA
10k Ω
48 kHz Sample Rate, 24-bit
TBA
USB (HID) KEYBOARD & MOUSE
USB (HID)
(1) USB Mini A/B Connector (“HOST”); connect a
DXLink Fiber TX to a PC and emulate keyboard
and mouse commands from a DXLink Fiber Receiver
CONTROLS
ID Pushbutton
Advanced Configuration Interface
Serial
IR RX
IR TX
Toggle between DHCP and static IP addressing
Places system in NetLinx Device ID assignment mode
Reset the factory default settings
Restore the factory firmware image
(1) USB Mini-B Connector (“PROGRAM”)
(1) 3.5mm Pluggable Phoenix Terminal Block
Bidirectional RS-232
Standard NetLinx Baudrate 1200-115k
Parity support Odd/Even/None
(1) 3.5mm Mini-Stereo Jack
Port for IR03 Receiver (Optional)
(1) 3.5mm Pluggable Phoenix Terminal Block
Port for IR01 Emitter (Optional)
INDICATORS
Power Indicator
Digital Video Indicator
Audio Indicator
Analog Video Indicator
IR TX Indicator
(1) Green LED indicates whether or not the DXLFMFTX-MM-D is powered on
(1) Green LED indicates the presence of video signals
through the module
(1) Green LED indicates the presence of digital audio
signals through the module
(3) Green LEDs, 1 lights to indicate the presence of the
type of analog video through the Multi-Format TX
(composite, Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS)
(1) Red LED lights during the transmission of IR data
5
IR RX Indicator
RS-232 TX Indicator
RS-232 RX Indicator
LINK/ACT
Status
CEC Indicator
USB Indicator
via the rear IR port
(1) Yellow LED lights during the receipt of IR data via
the rear IR port
(1) Red LED shows serial transmit (TX) data activity
(1) Yellow LED shows serial receive (RX) data activity
(1) Green LED lights when the Ethernet cable is
connected and an active link is established. This LED
also blinks when receiving Ethernet data packets
(1) Green LED lights when the Controller is
programmed and communicating properly
Not currently supported
(1) Yellow LED lights when host device is connected
FRONT CONNECTORS
Advanced Configuration Interface
Local Loopback Output Connector
(1) USB Mini-B Connector (“PROGRAM”)
(1) HDMI Type A Female, non-scaling
BACK CONNECTORS
Video Input
HDMI Input
Analog Stereo Input
S/PDIF Digital Audio Input
ICS LAN/Ethernet Port
Serial
IR RX
IR TX
USB (HID) Keyboard & Mouse
DXLink Fiber Output
Local Power
(1) HD-15 (RGBHV, RGBs, RGsB, Y/Pb/Pr,
Y/c / S-Video, composite (breakout cable
is required for RGB formats)
(1) HDMI Type A Female
(1) 3.5mm Mini-Stereo Jack
(1) RCA Jack
(1) RJ-45 Connector, TCP/IP Port (ICS LAN 10/100)
(1) 3.5mm Pluggable Phoenix Terminal Block
Bidirectional RS-232
Standard NetLinx Baudrate 1200-115k
Parity support Odd/Even/None
(1) 3.5mm Mini-Stereo Jack
Port for IR03 Receiver (Optional)
(1) 3.5mm Pluggable Phoenix Terminal Block
Port for IR01 Emitter (Optional)
(1) USB Mini A/B Connector (“HOST”); connect a
DXLink Fiber TX to a PC and emulate keyboard and
mouse commands from a DXLink Fiber Receiver
(1) LC Duplex conforming to ANSI TIA/EAI 604-10
(FOCIS 10A)
TBA
For a detailed pictorial drawing please visit: http://www.amx.com/products/DXLF-MFTX-MM-D.asp
About AMX
AMX hardware and software solutions simplify the implementation, maintenance, and use of technology to create effective environments. With the increasing number of
technologies and operating platforms at work and home, AMX solves the complexity of managing this technology with reliable, consistent and scalable systems. Our award-winning
products span control and automation, system-wide switching and audio/video signal distribution, digital signage and technology management. They are implemented worldwide in
conference rooms, homes, classrooms, network operation / command centers, hotels, entertainment venues, broadcast facilities, and more. ©2013 AMX. All rights reserved.
Specifications subject to change. Revised 9-Oct-13.
AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
6
Download PDF