IC693MDL653

IC693MDL653
This Datasheet is for the
IC693MDL653
24 VDC Positive/Negative Logic, 32 Point Input
http://www.cimtecautomation.com/parts/p-14660-ic693mdl653.aspx
Provides the wiring diagrams and installation guidelines for this GE Series 90-30
module.
For further information, please contact Qualitrol Technical Support at
1-800-784-9385
[email protected]
6
Discrete Input Modules
24 VDC Positive/Negative Logic, 32 Point Input
IC693MDL653
This 24 volt DC Positive/Negative Logic Input module for the Series 90-30 Programmable
Logic Controller provides 32 input points in four isolated groups with eight points in each
group. Each group has two common pins associated with it, which are tied together internally.
The On and Off response times for this module are 2 milliseconds maximum. This input
module is designed to have both positive and negative logic characteristics. When connected
for positive logic, it sinks current from the input device to the user common or negative power
bus. The input device is connected between the positive power bus and the circuit input. When
connected for negative logic, it sources current through the input device to the user common or
positive power bus. The input device is connected between the negative power bus and the
circuit input. Current into an input point results in a logic 1 in the input status table (%I).
Input characteristics are compatible with a wide range of input devices, such as pushbuttons,
limit switches, and electronic proximity switches. Power to operate field devices must be
supplied by the user.
Connections to the input circuits are made from the user’s input devices to a 50-pin connector
mounted on the front of the module. Prewired cables having a mating connector on one end
and the wires on the opposite end terminated with terminal lugs are available from GE Fanuc.
This module does not have LED indicators to indicate circuit status. This module can be
installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.
Table 6-10. Specification for IC693MDL653
Rated Voltage
Input Voltage Range
24 volts DC
24 volts DC (+10%, –20%)
Inputs per Module[
Isolation
32 (four groups with two commons per group)
1500 volts between field side and logic side
Input Current
7.5 mA (average) at rated voltage
Input Characteristics
On-state Voltage
Off-state Voltage
On-state Current
Off-state Current
On response Time
Off response Time
15 volts DC minimum
6 volts DC maximum
4.5 mA minimum
2 mA maximum
2 ms maximum
2 ms maximum
Internal Power Consumption
5 mA (16 inputs on) from 5 volt bus on the backplane
[ The maximum number of inputs turned on at the same time should be limited to 16 or less.
Refer to data sheet GFK-0867C, or later revision for product standards and general specifications.
GFK-0898F
Chapter 6 – Discrete Input Modules
6-19
6
IC693MDL653 Input Module Field Wiring Information
The following figure provides wiring information for connecting user supplied input devices
and power source to the 24 volt DC positive/negative logic, FAST input module.
a44848
TYPICAL CIRCUIT
COM
INPUT
MODULE
CIRCUITRY
CONNECTOR
TERMINALS
FIELD
WIRING
MODULE
CIRCUITRY
CONNECTOR
TERMINALS
49
50
I
16
I
32
I
48
I
15
I
31
I
47
I
30
I
46
I
INPUT
CIRCUIT
MODULE
CIRCUITRY
29
COM (A)
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
Î
ÎÎ
Î
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
45
A1
A2
A3
A4
+
I
12
I
28
I
44
I
11
I
27
I
43
I
10
I
42
+
A5
A6
A7
A8
I
CONNECTOR
TERMINALS
FIELD
WIRING
INPUT
CIRCUIT
MODULE
CIRCUITRY
I
7
I
24
I
39
I
6
I
23
I
38
I
22
I
37
I
INPUT
CIRCUIT
COM (B)
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
Î
ÎÎ
Î
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
B1
B2
B3
B4
+
+
B5
B6
B7
B8
CONNECTOR
TERMINALS
40
41
FIELD
WIRING
FIELD
WIRING
21
COM (C)
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
Î
ÎÎ
Î
ÎÎ
ÎÎÎ
36
C1
C2
C3
C4
C5
C6
C7
C8
+
+
I
3
I
20
I
35
I
2
I
19
I
34
I
1
I
33
I
INPUT
CIRCUIT
COM (D)
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
Î
ÎÎ
Î
ÎÎ
ÎÎÎ
D1
D2
D3
D4
+
D5
+
D6
D7
D8
Figure 6-16. Field Wiring - 24 Volt Pos/Neg Logic 32 Point Input Module IC693MDL653
6-20
Series 90-30 PLC I/O Module Specifications – July 2000
GFK-0898F
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement