5162E catalogue
aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
Fluoropolymer Hose
& Fittings Products
Flexible Braided Hose, Catalog 5162E
Catalog Number 5162E
Table of Contents
PAGE Hose & Fittings
Description
Page
Description
Page
Smooth, True-Bore PTFE Hose
4
PAGE Crimp Fittings
23
Convoluted PTFE Hose
7
PAGE Collars
33
Flare Seal Convoluted Hose
12
PAGE Adapters
35
Silicone Hose Products
14
Accessories
57
Specialty Hoses
16
Industrial Hose & Fittings
Description
Page
S30/S30B/S40/S40B
37
91N Series Fittings
39
90 Series Fittings
51
Accessories
57
Technical Assistance
Technical Help
58
Warranty Statement
69
Offer of Sale
72
1
i
We Make Hose Solutions
Standard and Custom Designs
Whether you are purchasing a standard, off the shelf hose, or a custom design, PARKER PAGE hoses
deliver the ultimate in life, flexibility and integrity. In fact, PARKER PAGE International Hose is known
in the hose industry as a leader in the design and development of application specific PTFE hoses.
Many of our hose solutions have spawned new product lines, such as PAGE-flex SBF™, offering a
smoothbore flexible hose with the same bend radius of a conventional convoluted hose.
Non Conductive & Conductive
Some applications require conductivity of the tube in order to dissipate static build up. PARKER PAGE International
offers a full range of smooth bore hoses with non-conductive (natural) and conductive (black) inner core to meet today’s
most demanding applications. This tubing may be supplied with a fully conductive liner and also, a fully conductive tube.
Fully conductive tubes are available in PTFE and PFA. Industrial grade conductivity conforms to AMS-H-27267, having
a minimum conductance of 10-20 micro amps with 1,000 vdc applied over a 14” length. Upon special request an ISO
grade conforming to a maximum of a 1 mega ohm resistance over a one meter length when tested in accordance with
ISO 8031 is available.
2
Catalog Number 5162E
PARKER PAGE HOSES
•Chemical Resistant
•Maximum Durability
•Corrosion Resistant
•FDA & USP Class VI
•Handles High Temperatures
Compliant
•Non-Adhesive
•Environmentally Safe
(Low Effusion)
•Easy Cleaning
•Long Life Expectancy
PAGE-flex SBF™
1/2 the minimum bend radius of
conventional smoothbore tubing
Fire Retardent Sleeving
3
Specialty braid or braiding
patterns are available
Custom fittings
True-Bore Hose
PAGE
HOSE & FITTINGS
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
4
Catalog Number 5162E
FLUOROPOLYMER HOSE PRODUCTS
Size
Code
Z for Double
Braid
Size
Code
3/16"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4
1-1/2"
2"
2-1/2"
3"
4"
Fitting
End 1
Fitting
Material
End 1
Fitting
End 2
Fitting
Material
End 2
Flange
Material
-
Fitting
Code
03
04
05
06
08
10
12
14
16
20
24
32
40
48
64
Hose
Code
ACW
CBV
CWV
FTHB
FTHN
KCB
KCW
NCB
NCW
PCB
PCBV
PCW
PCWV
RCTB
RCTW
SBFW
SCB
SCBV
SCW
SCWV
STB
STW
Hose
Code
A
BV
V
FB
FN
RB
R
MB
M
NB
PB
N
P
GB
G
SBF
TB
JB
T
J
SB
S
Industrial Thread
Male Pipe NPT Hex
Female Pipe NPT Hex
Male Pipe NPT Step Down
Male Pipe NPT Step Up
Male Union Step Up
Male Union Step Down
JIC Female Swivel
Male JIC 37°
JIC Female Step Up
Male Union
Female Union
Female NPSH
Female ORFS Swivel
Male ORFS
Male O-Ring Boss
Flanges
Flange Retainer
Flare-Seal Flange Retainer
Cam Lock
Female Cam Lock
With Locking Handles
Male Cam Lock
Sanitary
Sanitary Tri Clamp
Sanitary Tri Clamp 45°
Sanitary Tri Clamp 90°
Sanitary 1-Step Up
Sanitary 2-Step Up
Sanitary 3-Step Up
Sanitary Flare Seal™
Sanitary Mini
Sanitary Mini Step Up
I-Line Male
I-Line Female
Bevel Seat Female
Bevel Seat Male
Tube and Vacuum
PAGElok™ Tube Adapter
PAGElok™ Tube
Compression Fitting
Buttweld
Buttweld for Tube
Buttweld for Pipe
Special Ends
Standard Cuffed Ends
Non Standard Fitting
-
Length in Inches
Fitting
Material
03
06
13
23
34
35
30
31
32
33
36
27
80
81
86
05
29
07
17
08
40
4K
4L
4A
4B
4C
4F
42
43
48
49
45
46
38
39
18
19
90
99
Length in
1/8"
increments
True-Bore Hose
TRUE BORE & CONVOLUTED Part Numbering System
Accessory
Code
Accessory
Code*
304 Stainless (SS 304)
316 Stainless (SS 316)
316 Stainless (SS 15Ra)
Electropolished to 15Ra
Carbon Steel
PFA Encapsulated
Hastelloy
Monel
4
6
None
Spring Guard
Armour Guard
End Bend Restrictors
Fire Sleeve
Rubber Sleeve
FEP Heat Shrink
Polyolefin Heat Shrink
Silicone Sleeve
Vacuum Spring Wire
Specials
E
C
T
H
M
S
A
E
F
H
T
P
M
W
X
*See Accessory Section
for Details
Flange
Material
None
Carbon Steel
Epoxy Coated
O
304SS
316SS
4
6
Kynar
Polypropylene
Non Standard
K
P
X
D
= Optional
Example: 32J08T17T0-0120-A
Size: 2"
Style: SCWV
Braid: 316 SS Single Braid
Core: Heavy Wall Open Pitch Convoluted PTFE
End 1: 2" 316 SS PFA Encapsulated Male Cam & Groove
End 2: 2" 316 SS PFA Encapsulated Female Cam & Groove
Length: 120" from end of Male Cam to seat of Female Cam
with full length Armour Guard
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
5
True-Bore Hose
TRUE BORE - SMOOTHBORE PTFE HOSE
With Stainless Steel Braid
PARKER PAGE International TRUE BORE Smoothbore PTFE hose is constructed with an extruded virgin
Fluoropolymer (PTFE) inner core reinforced with a tightly woven stainless steel braid. The braid serves a
dual purpose, by (a) providing a protective covering and (b) allowing the hose to carry substantial operational
pressure while maintaining a 4:1 safety factor.
PARKER PAGE Smoothbore inner core is also available with special outer reinforcement braids. Special
metal braids such as Monel®, Hastelloy® and non-metallic braids of Nomex®, KEVLAR®, Kynar®,
PEEK™, polyester, and many others can be furnished on request.
STW (Natural) & STB (Conductive)
True Bore Smoothbore PTFE with Stainless Steel Braid
Part
Number
Natural
Conductive
03-STW
03-STB
04-STW
04-STB
06-STW
06-STB
08-STW
08-STB
10-STW
10-STB
12-STW
12-STB
16-STW
16-STB
16Z-STW
16Z-STB
20Z-STW
20Z-STB
24Z-STW
24Z-STB
Hose
I.D.
Inch
(MM)
.125
(3.2)
.250
(6.3)
.375
(9.5)
.500
(12.7)
.625
(15.9)
.750
(19.0)
1.000
(25.4)
1.000
(25.4)
1.250
(31.7)
1.500
(38.1)
Hose
O.D.
Inch
(MM)
.250
(6.3)
.370
(9.4)
.510
(13.0)
.630
(16.0)
.760
(19.3)
.880
(22.4)
1.130
(28.7)
1.220
(31.0)
1.410
(35.8)
1.730
(43.9)
Working
Pressure
psi @ 72°F
(Bars @ 22°C)
3000
(207.0)
3000
(207.0)
2000
(138.0)
1750
(120.7)
1500
(103.5)
1000
(69.0)
1000
(69.0)
1200
(82.7)
1000
(69.0)
900
(62.1)
Minimum
Burst
Pressure
psi @ 72°F
(Bars @ 22°C)
12000
(828.0)
12000
(828.0)
8000
(552.0)
7000
(483.0)
6000
(414.0)
4000
(276.0)
4000
(276.0)
4800
(331.0)
4000
(276.0)
3600
(248.4)
NOTE: Temperature Range: -100°F to +450°F (-73°C to +232°C)
Uses crimp collar ST300
Vacuum
Rating
In. Hg. @ 72°F
(kg/sq.cm @ 22°C)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
20.0
(0.8)
20.0
(0.8)
18.0
(0.6)
15.0
(0.5)
Minimum
Bend
Radius
Inch
(MM)
1.5
(38.1)
3.0
(76.2)
5.00
(127.0)
6.5
(165.1)
7.5
(190.5)
8.0
(215.9)
12.00
(304.8)
12.00
(304.8)
14.00
(355.6)
18.00
(381.0)
Weight
per
Foot
Lbs.
(Kg/M)
.051
(0.076)
.084
(0.125)
.108
(0.161)
.159
(0.237)
.196
(0.292)
.202
(0.301)
.327
(.487)
.557
(.829)
.682
(1.015)
.790
(1.176)
Z indicates Double Braid
See page 5 for Part Numbering System.
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
PEEK™ is a registered trademark of Victrex. Monel™ is a registered trademark of Atofina. Kynar® is a registered
trademark of Elf Autochem, NA Hastelloy® is a registered trademark of Haynes International. Nomex® and
Kevlar® are registered trademarks of Dupont.
6
Catalog Number 5162E
SEAMLESS CONVOLUTED PTFE HOSE
Convoluted
Standard Wall
PARKER PAGE International designs and manufactures high quality seamless convoluted hoses that
are open pitched and self draining. Standard seamless PTFE braided hoses are extremely lightweight,
flexible and kink resistant. PARKER PAGE Convoluted Fluoropolymer PTFE hoses are less susceptible to
cracking from stress or flexing than metal hoses or other Fluoroplastic hoses when used within designated
operating parameters.
PARKER PAGE offers two types of PTFE inner core, natural and conductive (static-dissipative). External
hose reinforcements consist of stainless steel, polypropylene and many other metallic and non-metallic
braid options including fire sleeve, wire guard and polyolefin heat shrinkable tubing.
PTFE is Extremely Chemical Resistant
(Non- Corrosive)
Environmentally Safe - (Low Effusion)
Non-Adhesive
Easy Cleaning
Long Life Expectancy
Maximum Durability
Exceptional tensile strength
PARKER
compliant
with -the
following
requirements:
21 CFR
177.1550,
177.2600 •
All PAGE
ratingsHose
basedproduct
on 72°F materials
(22°C) - Allare
dimensions
nominal
Working
pressures
and vacuumFDA
ratings
may vary
depending
USP XXII Class VI Requirements
• Pharmacopoeia
• ISO 10993
Sections 5,
6, 10, 11 • USDA Standards • 3A Stanupon
end connections 3.1.9
and process
and temperature
parameters.
7
SEAMLESS CONVOLUTED PTFE HOSE
Standard Wall
SCW (Natural) & SCB (Conductive)
Convoluted
316 Stainless Steel Braid
Part
Number
SCW - NATURAL
SCB - CONDUCTIVE
(Static Dissipative)
Natural
Conductive
04-SCW
04-SCB
06-SCW
06-SCB
08-SCW
08-SCB
12-SCW
12-SCB
16-SCW
16-SCB
20-SCW
20-SCB
24-SCW
24-SCB
32-SCW
32-SCB
Hose
I.D.
Hose
O.D.
Working
Pressure
Inch
(MM)
.250
(06.3)
.375
(09.5)
.500
(12.7)
.750
(19.0)
1.000
(25.4)
1.250
(31.7)
1.500
(38.1)
2.000
(50.8)
Inch
(MM)
.460
(11.7)
.540
(13.7)
.720
(18.3)
1.020
(25.9)
1.310
(33.3)
1.730
(43.9)
1.930
(49.0)
2.420
(61.5)
psi @ 72°F
(Bars @ 22°C)
1500
(103.5)
1500
(103.5)
1500
(103.5)
1200
(82.8)
1000
(69.0)
750
(51.7)
650
(44.8)
450
(31.0)
Minimum
Burst
Pressure
psi @ 72°F
(Bars @ 22°C)
6000
(414.0)
6000
(414.0)
6000
(414.0)
4800
(331.2)
4000
(276.0)
3200
(220.8)
2600
(179.4)
1800
(124.2)
Vacuum
Rating
In. Hg. @ 72°F
(Kg/Sq.CM @ 22°C)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
Minimum
Bend
Radius
Inch
(MM)
0.750
(19.0)
1.000
(25.4)
1.500
(38.1)
2.000
(50.8)
2.500
(63.5)
3.000
(76.2)
3.750
(95.2)
4.750
(120.6)
Weight
per
Foot
Lbs.
(Kg/M)
.075
(.112)
.140
(.208)
.156
(.232)
.266
(.396)
.370
(.551)
.458
(.682)
.545
(.811)
.897
(1.335)
Minimum
Bend
Radius
Inch
(MM)
0.750
(19.0)
1.000
(25.4)
1.500
(38.1)
2.000
(50.8)
2.500
(63.5)
3.000
(76.2)
3.750
(95.2)
4.750
(120.6)
Weight
per
Foot
Lbs.
(Kg/M)
.030
(.045)
.060
(.089)
.148
(220)
.180
(.268)
.262
(.390)
.370
(.551)
.420
(.625)
.560
(.833)
NOTE: Temperature Range: -100°F to +500°F (-73°C to +260°C)
Uses crimp collar SC300
PCW (Natural) & PCB (Conductive)
Polypropylene Braid
Part
Number
PCW - NATURAL
PCB - CONDUCTIVE
(Static Dissipative)
Natural
Conductive
04-PCW
04-PCB
06-PCW
06-PCB
08-PCW
08-PCB
12-PCW
12-PCB
16-PCW
16-PCB
20-PCW
20-PCB
24-PCW
24-PCB
32-PCW
32-PCB
Hose
I.D.
Hose
O.D.
Working
Pressure
Inch
(MM)
.250
(06.3)
.375
(09.5)
.500
(12.7)
.750
(19.0)
1.000
(25.4)
1.250
(31.7)
1.500
(38.1)
2.000
(50.8)
Inch
(MM)
.550
(13.9)
.640
(16.3)
.820
(20.8)
1.150
(29.2)
1.500
(38.1)
1.920
(48.8)
2.120
(53.8)
2.650
(67.3)
psi @ 72°F
(Bars @ 22°C)
350
(59.1)
350
(59.1)
300
(20.7)
250
(17.2)
250
(17.2)
200
(13.8)
200
(13.8)
200
(13.8)
Minimum
Burst
Pressure
psi @ 72°F
(Bars @ 22°C)
1400
(96.6)
1400
(96.6)
1200
(82.8)
1000
(69.0)
1000
(69.0)
800
(55.2)
800
(55.2)
800
(55.2)
Vacuum
Rating
In. Hg. @ 72°F
(Kg/Sq.CM @ 22°C)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
NOTE: Temperature Range: 0°F to +212°F (-18°C to +100°C)
Uses crimp collar PC300
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
8
Catalog Number 5162E
SEAMLESS CONVOLUTED PTFE
HOSE ASSEMBLIES
Heavy Wall Open Pitch Vacuum Hose
SCWV (Natural) & SCBV (Conductive)
Part
Number
Natural
Conductive
08-SCWV
08-SCBV
12-SCWV
12-SCBV
16-SCWV
16-SCBV
20-SCWV
20-SCBV
24-SCWV
24-SCBV
32-SCWV
32-SCBV
40-SCWV
40-SCBV
48-SCWV
48-SCBV
64-SCWV
64-SCBV
psi @ 72°F
(Bars @ 22°C)
Minimum
Burst
Pressure
psi @ 72°F
(Bars @ 22°C)
1500
(103.5)
1200
(82.8)
1000
(69.0)
750
(51.7)
650
(44.8)
450
(31.0)
200
(13.8)
175
(12.0)
150
(10.3)
6000
(441.0)
4800
(331.2)
4300
(296.7)
3200
(220.8)
2600
(179.4)
2100
(144.9)
800
(55.2)
700
(48.3)
600
(41.4)
Order
I.D.
Hose
O.D.
Working
Pressure
Inch
(MM)
Inch
(MM)
.500
(12.7)
.750
(19.0)
1.000
(25.4)
1.250
(31.7)
1.500
(38.1)
2.000
(50.8)
2.500
(63.5)
3.000
(76.2)
4.000
(101.6)
.720
(18.3)
1.040
(26.4)
1.250
(31.7)
1.660
(42.2)
1.920
(48.8)
2.490
(63.2)
3.250
(82.5)
3.800
(96.5)
4.760
(120.9)
In. Hg. @ 72°F
(Kg/Sq.CM @ 22°C)
Minimum
Bend
Radius
Inch
(MM)
Weight
per
Foot
Lbs.
(Kg/M)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
2.00
(50.8)
2.75
(69.8)
4.00
(101.6)
5.50
(139.7)
7.00
(177.8)
8.50
(215.9)
12.00
(304.8)
14.00
(355.6)
16.00
(406.4)
.173
(0.257)
.330
(0.491)
.368
(.548)
.560
(.833)
.641
(.954)
.835
(1.243)
1.520
(2.262)
1.820
(2.709)
2.100
(3.125)
Minimum
Bend
Radius
Inch
(MM)
Weight
per
Foot
Lbs.
(Kg/M)
Vacuum
Rating
Convoluted
316 Stainless Steel Braid - Heavy Wall Open Pitch
SCWV - NATURAL
SCWV - CONDUCTIVE
(Static Dissipative)
NOTE: Temperature Range: -100°F to +500°F (-73°C to +260°C)
Uses crimp collar SC300
PCWV (Natural) & PCBV (Conductive)
Polypropylene Braid - Heavy Wall Open Pitch
Part
Number
Natural
Conductive
Order
I.D.
Hose
O.D.
Working
Pressure
Inch
(MM)
Inch
(MM)
psi @ 72°F
(Bars @ 22°C)
Minimum
Burst
Pressure
psi @ 72°F
(Bars @ 22°C)
Vacuum
Rating
In. Hg. @ 72°F
(Kg/Sq.CM @ 22°C)
.500
.810
300
1200
29.9
3.00
.136
(12.7) (20.6)
(20.7)
(82.8)
(1.0)
(76.2)
(.202)
.750 1.100
250
1000
29.9
3.50
.215
12-PCWV 12-PCBV
(19.0) (27.9)
(17.2)
(69.0)
(1.0)
(88.9)
(.320)
1.000 1.440
250
1000
29.9
4.50
.313
PCWV - NATURAL
16-PCWV 16-PCBV
(25.4) (35.6)
(17.2)
(69.0)
(1.0)
(114.3)
(.466)
1.250 1.860
200
800
29.9
5.00
.396
20-PCWV 20-PCBV
(31.7) (47.2)
(13.8)
(55.2)
(1.0)
(127.0)
(.589)
1.500 2.100
200
800
29.9
6.00
.492
24-PCWV 24-PCBV
(38.1) (53.3)
(13.8)
(55.2)
(1.0)
(152.4)
(.732)
2.000 2.660
200
800
29.9
8.50
.662
32-PCWV 32-PCBV
(50.8) (67.6)
(13.8)
(55.2)
(1.0)
(215.9)
(.985)
2.500 3.420
150
600
29.9
12.00
1.206
PCBV - CONDUCTIVE
40-PCWV 40-PCBV
(Static Dissipative)
(63.5) (86.9)
(10.3)
(41.4)
(1.0)
(304.80) (1.795)
3.000 3.920
125
500
29.9
14.00
1.452
48-PCWV 48-PCBV
(76.2) (99.6)
(8.6)
(34.5)
(1.0)
(355.6)
(2.161)
4.000 4.920
100
400
29.9
16.00
1.678
64-PCBV
All64-PCWV
ratings based
on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
(101.6) (124.9)
(6.9)
(27.6)
(1.0)
(406.4)
(2.497)
upon end connections and process and temperature parameters.
NOTE: Temperature Range: 0°F to +212°F (-18°C to +100°C)
Uses crimp collar PC300
08-PCWV
08-PCBV
9
SEAMLESS CONVOLUTED PTFE
HOSE ASSEMBLIES Without Braid
PTFE - Heavy Wall Open Pitch
Convoluted
LOW PRESSURE VENT AND VACUUM TUBING
PARKER PAGE manufactures high quality PTFE convoluted
tubing from thick walled PTFE that is open pitched and
self draining. CWV/CBV tubing is manufactured with
smooth, rounded, helical-shaped convolutions which help
to promote easy cleaning and self draining for ultimate
high purity, convoluted tubing.
PARKER PAGE Heavy Wall Open Pitch tubing is offered
in natural (non-conductive) or black (conductive-static
dissipating). CWV and CBV tube can be provided with
standard smooth cuffs, Flare Seal style, flanged or a
variety of crimp style end fittings. For vacuum applications
at elevated temperatures and for 2.5”, 3” and 4” sizes, a
vacuum wire is recommended.
PARKER PAGE CWV and CBV is widely used in high
temperature and chemical resistant applications for
industries such as semiconductor, automotive, chemical,
petrochemical and pharmaceutical industries.
As Manufactured
Specified Flare
Vacuum Wire on I.D.
Standard Cuff
Vacuum Wire on O.D.
Reduced Cuff
90° Flanged End
Expanded Cuff
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
10
Catalog Number 5162E
CWV (Natural) & CBV (Conductive)
Part
Number
Natural
(Conductive)
08-CWV
(08-CBV)
12-CWV
(12-CBV)
16-CWV
(16-CBV)
20-CWV
(20-CBV)
24-CWV
(24-CBV)
32-CWV
(32-CBV)
40-CWV
(40-CBV)
48-CWV
(48-CBV)
64-CWV
(64-CBV)
Min./Max.
Maximum
Working
Inside
Outside
Pressure
Diameter
Diameter
Inch
Inch
Inch
psi @ 72°F
(Bars @ 22°C)
(MM)
(MM)
(MM)
.500
.454
.466
.700
50
(12.7) (11.5) (11.8)
(17.8)
(3.4)
.750
.683
.701
1.010
50
(19.0) (17.4) (17.8)
(25.7)
(3.4)
1.000 .841
.859
1.510
50
(25.4) (21.4) (21.8)
(30.7)
(3.4)
1.250 1.125 1.145
1.610
40
(31.7) (28.6) (29.1)
(40.9)
(2.8)
1.500 1.420 1.480
1.880
40
(38.1) (36.1) (37.6)
(47.8)
(2.8)
2.000 1.770 1.830
2.432
30
(50.8)
(45) (46.5)
(61.8)
(2.0)
2.500 2.460 2.540
3.210
20
(63.5) (62.5) (64.5)
(81.5)
(1.4)
3.000 2.940 3.060
3.750
15
(76.2) (74.7) (77.7)
(95.2)
(1.0)
4.000 3.940 4.060
4.750
10
(101.6) (100) (103)
(121)
(0.7)
Order
I.D.
Minimum
Burst
Pressure
Weight
per
foot
Lbs.
psi @ 72°F
In. Hg. @72°F
(Bars @ 22°C) (Kg/Sq.CM @22°C)
KG/M
100
29.9
0.087
(6.9)
(1.0)
(0.129)
100
29.9
0.165
(6.9)
(1.0)
(0.246)
100
29.9
0.184
(6.9)
(1.0)
(0.274)
80
29.9
0.280
(5.5)
(1.0)
(0.417)
80
29.9
0.320
(5.5)
(1.0)
(0.476)
60
29.9
0.417
(4.1)
(1.0)
(0.621)
40
29.9
0.760
(2.8)
(1.0)
(1.131)
30
29.9
0.910
(2.0)
(1.0)
(1.354)
20
29.9
1.050
(1.3)
(1.0)
(1.563)
Vacuum
Rating
Minimum
Bend
Radius*
Inch
(MM)
1.50
(38)
1.88
(48)
2.50
(64)
3.13
(79)
3.75
(95)
4.75
(120)
5.00
(127)
7.00
(178)
9.00
(229)
NOTE: Temperature Range: -100°F to +500°F (-73°C to +260°C)
Uses crimp collar SC300
*Bend Radius based on 36” length piece
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
11
Convoluted
PTFE - Heavy Wall Convoluted Tubing
CWV - NATURAL
CBV - CONDUCTIVE
(Static Dissipative)
PTFE FLARE-SEAL™ PRODUCTS
Flare-Seal
Convoluted
PARKER PAGE Flare-Seal™ PTFE hose products are
designed and manufactured to provide the ultimate in
high purity, corrosion/chemical resistance and sanitary
applications. PARKER PAGE Flare-Seal™ PTFE hose
products are available in convoluted with a stainless steel
braid or as polypropylene braided convoluted assemblies.
They can be manufactured in natural (non-conductive) or
black (conductive-static dissipating) assemblies.
One unique benefit offered by PARKER PAGE Flare-Seal™
hoses is that the PTFE hose liner actually passes through the
inside of the fitting and it is then flared over the face of the
fitting. This special process is a significant improvement over
conventional fitting assembly procedures, where the fitting
normally passes through the inside of the liner, creating
flow restrictions and bacterial entrapment. PARKER PAGE
Flare-Seal™ products solve these problems with the benefit
of unrestricted flow leaving no area for bacterial entrapment
while providing 100% PTFE coverage on all wetted surfaces.
Flare-Seal™ products can be provided with flanged ends or
sanitary tri-clamp end connections.
SEAMLESS INNER CORE
UNINTERRUPTED FLOW
EASY TO CLEAN
ratings
based
on 72°F
(22°C) - All
- Working
pressures
and vacuum
ratings
may177.1550,
vary depending
PARKERAll
PAGE
Hose
product
materials
aredimensions
compliantnominal
with the
following
requirements:
FDA
21 CFR
177.2600 •
upon
end connections
and •process
and temperature
USP XXII Class VI Requirements •
Pharmacopoeia
3.1.9
ISO 10993
Sections 5, parameters.
6, 10, 11 • USDA Standards • 3A Standards
12
Catalog Number 5162E
PTFE FLARE-SEAL™ PRODUCTS
Seamless Convoluted
SCWV-FS (Natural) & SCBV-FS (Conductive)
Part
Number
Natural
Conductive
08-SCWV-FS 08-SCBV-FS
12-SCWV-FS 12-SCBV-FS
16-SCWV-FS 16-SCBV-FS
20-SCWV-FS 20-SCBV-FS
24-SCWV-FS 24-SCBV-FS
32-SCWV-FS 32-SCBV-FS
40-SCWV-FS 40-SCBV-FS
48-SCWV-FS 48-SCBV-FS
Order
I.D.
Hose
O.D.
Working
Pressure
Inch
(MM)
.500
(12.7)
.750
(19.0)
1.000
(25.4)
1.250
(31.7)
1.500
(38.1)
2.000
(50.8)
2.500
(63.5)
3.000
(76.2)
4.000
(101.6)
Inch
(MM)
.720
(18.3)
1.040
(26.4)
1.250
(31.7)
1.660
(42.2)
1.920
(48.8)
2.490
(63.2)
3.250
(82.5)
3.800
(96.5)
4.760
(120.6)
psi @ 72°F
(Bars @ 22°C)
500
(34.5)
425
(29.3)
350
(24.1)
325
(22.4)
300
(20.7)
250
(17.2)
200
(13.8)
175
(12.0)
150
(10.3)
Standard Wall
64-SCWV-FS 64-SCBV-FS
Minimum
Burst
Pressure
psi @ 72°F
(Bars @ 22°C)
2000
(137.9)
1700
(117.2)
1400
(96.5)
1300
(89.6)
1200
(82.7)
1000
(69.0)
800
(55.2)
700
(48.2)
600
(41.4)
Vacuum
Rating
In. Hg. @ 72°F
(Kg/Sq.CM @ 22°C)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
Minimum
Bend
Radius
Inch
(MM)
2.00
(50.8)
2.75
(69.8)
4.00
(101.6)
5.50
(139.7)
7.00
(177.8)
8.50
(215.9)
12.00
(304.8)
14.00
(355.6)
16.00
(406.4)
Weight
per
Foot
Lbs.
(Kg/M)
.173
(0.257)
.330
(0.491)
.368
(.548)
.560
(.833)
.641
(.954)
.835
(1.243)
1.520
(2.262)
1.820
(2.709)
2.100
(3.125)
Flare-Seal
PTFE Convoluted 316 Stainless Braid with Flare Seal Fitting
SCWV-FS - NATURAL
SCBV-FS - CONDUCTIVE
(Static Dissipative)
NOTE: Temperature Range: -100°F to +500°F (-73°C to +260°C)
PCWV-FS (Natural) & PCBV-FS (Conductive)
PTFE Convoluted Polypropylene Braid with Flare Seal Fitting
Minimum
Minimum
Weight
Vacuum
Burst
Bend
per
Rating
Pressure
Radius
Foot
Inch
Inch
psi @ 72°F
psi @ 72°F
In. Hg. @ 72°F
Inch
Lbs.
Natural
Conductive
(MM) (MM)
(Bars @ 22°C)
(Bars @ 22°C)
(Kg/Sq.CM @ 22°C)
(MM)
(Kg/M)
.500
.810
300
1200
29.9
3.00
.136
08-PCWV-FS 08-PCBV-FS
(12.7) (20.6)
(20.7)
(82.8)
(1.0)
(76.2)
(0.202)
.750 1.100
250
1000
29.9
3.50
.215
12-PCWV-FS 12-PCBV-FS
(19.0) (27.9)
(17.2)
(69.0)
(1.0)
(88.9)
(0.320)
1.000 1.440
250
1000
29.9
4.50
.313
16-PCWV-FS 16-PCBV-FS
PCWV-FS - NATURAL
(25.4) (35.6)
(17.2)
(69.0)
(1.0)
(114.3)
(.466)
1.250 1.860
200
800
29.9
5.00
.396
20-PCWV-FS 20-PCBV-FS
(31.7) (47.2)
(13.8)
(55.2)
(1.0)
(127.0)
(.589)
1.500 2.100
200
800
29.9
6.00
.492
24-PCWV-FS 24-PCBV-FS
(38.1) (53.3)
(13.8)
(55.2)
(1.0)
(152.4)
(.732)
2.000 2.660
200
800
29.9
8.50
.662
32-PCWV-FS 32-PCBV-FS
(50.8) (67.6)
(13.8)
(55.2)
(1.0)
(215.9)
(.985)
2.500 3.420
150
600
29.9
12.00
1.206
PCBV-FS - CONDUCTIVE
40-PCWV-FS 40-PCBV-FS
(63.5) (86.9)
(10.3)
(41.4)
(1.0)
(304.8)
(1.795)
(Static Dissipative)
3.000 3.920
125
500
29.9
14.00
1.452
48-PCWV-FS 48-PCBV-FS
(76.2) (99.6)
(8.6)
(34.5)
(1.0)
(355.6)
(2.161)
4.000 4.920
100
400
29.9
16.00
1.678
64-PCWV-FS 64-PCBV-FS
(101.6)
(124.9)
(6.9)
(27.6)
(1.0)
(406.4)
(2.497)
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
Part
Number
Order
I.D.
Hose
O.D.
Working
Pressure
NOTE: Temperature Range: 0°Fupon
to +212°F
(-18°C to +100°C)
end connections
and process and temperature parameters.
13
PLATINUM CURED SILICONE PRODUCTS
As a compliment to our successful Fluoropolymer and Sanitary Food Grade Hoses, PARKER
PAGE has expanded its hose and tubing line to include Platinum Cured Silicone Products.
These high quality hoses continue our tradition of total customer satisfaction. PARKER
PAGE Fluoropolymer and Platinum Cured hoses meet or exceed the following requirements:
FDA 21 CFR 177.1550, 177.2600
UPS XXIII Class VI Requirements
SBP
European Pharmacopoeia 3.1.9
Platinum Cured Braided Silicone Tubing
ISO 10993 Sections 5, 6 10, 11
Part
Number
USDA Standards
3A Standards
02-SBP
Silicone
03-SBP
04-SBP
06-SBP
08-SBP
Available with Double Braid
Special Order
10-SBP
12-SBP
14-SBP
16-SBP
Tubing
I.D.
Tubing
O.D.
Working
Pressure
Minimum Burst
Pressure
Length/
Roll
Inch
(MM)
0.125
(3.2)
0.188
(4.8)
0.250
(6.4)
0.375
(9.5)
0.500
(12.7)
0.625
(15.9)
0.750
(19.1)
0.875
(22.2)
1.000
(25.4)
Inch
(MM)
0.313
(7.9)
0.375
(9.5)
0.500
(12.7)
0.625
(15.9)
0.875
(22.2)
1.000
(25.4)
1.125
(28.6)
1.250
(31.8)
1.405
(35.7)
psi @ 68°F
(Bars @ 20°C)
175
(12.1)
170
(11.7)
160
(11.0)
150
(10.3)
140
(9.7)
115
(7.9)
100
(6.9)
100
(6.9)
60
(4.1)
psi @ 68°F
(Bars @ 20°C)
700
(48.3)
650
(44.8)
575
(39.6)
550
(37.9)
420
(29.0)
400
(27.6)
350
(24.1)
250
(17.2
225
(15.5)
Feet
(Meter)
50
(15.2)
50
(15.2)
50
(15.2)
50
(15.2)
50
(15.2)
50
(15.2)
50
(15.2)
50
(15.2)
50
(15.2)
NOTE: Temperature Range: -80°F to +450°F (-62°C to +232°C)
Uses SIL300 Crimp Collar
SWPV
Platinum Cured 4 Ply Silicone Hose with Stainless Steel Wire Helix
Part
Number
08-SWPV
12-SWPV
16-SWPV
24-SWPV
32-SWPV
Hose
ID
Hose
OD
Working
Pressure
Minimum
Burst
Vacuum
Rating
Inch
(MM)
.500
(12.7)
.750
(19.0)
1.000
(25.4)
1.500
(38.1)
2.000
(50.8)
Inch
(MM)
.900
(22.8)
1.150
(29.2)
1.400
(35.6)
1.900
(48.3)
2.400
(61.0)
psi @ 72°F
(Bars @ 22°C
250
(17.2)
250
(17.2)
250
(17.2)
250
(17.2)
230
(15.8)
psi @ 72°F
(Bars @ 22°C)
750
(51.7)
750
(51.7)
750
(51.7)
750
(51.7)
700
(48.3)
In. Hg. @ 72°F
(Kg/Sq.CM @ 22°C)
29.0
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
Minimum
Bend
Radius
Inch
(MM)
1.50
(38.1)
2.50
(63.5)
3.00
(76.2)
4.00
(101.6)
5.50
(139.7)
NOTE: Temperature Range: -80°F to +450°F (-62°C to +232°C)
Uses SIL300 Crimp Collar
Sizes 2.5”, 3” and 4” are available upon request
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
14
Weight
per
Foot
Lbs.
(Kg/M)
.266
(0.397)
.366
(0.545)
.462
(0.689)
.658
(0.978)
.854
(1.270)
Catalog Number 5162E
SILICONE TUBING PRODUCTS
Part Numbering System
Hose
Code
Size
Code
3/16"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4
1-1/2"
2"
2-1/2"
3"
4"
Fitting
Material
End 1
Fitting
End 2
Fitting
Material
End 2
Flange
Material
-
03
04
05
06
08
10
12
14
16
20
24
32
40
48
64
C
ZC
E
-
Length in Inches
Fitting
Code
Hose
Code
SBP
SZBP
SWPV
Fitting
End 1
Length in
1/8"
increments
Fitting
Material
Industrial Thread
Male Pipe NPT Hex
Female Pipe NPT Hex
Male Pipe NPT Step Down
Male Pipe NPT Step Up
Male Union Step Up
Male Union Step Down
JIC Female Swivel
JIC Female Step Up
Male Union
Female Union
Female NPSH
Female ORFS Swivel
Male ORFS
Male O-Ring Boss
Flanges
Flange Retainer
Flare-Seal Flange Retainer
03
06
13
23
34
35
30
32
33
36
37
80
81
86
Cam Lock
Female Cam Lock
With Locking Handles
Male Cam Lock
Sanitary
Sanitary Tri Clamp
Sanitary Tri Clamp 45°
Sanitary Tri Clamp 90°
Sanitary 1-Step Up
Sanitary 2-Step Up
Sanitary 3-Step Up
Sanitary Flare Seal™
Sanitary Mini
Sanitary Mini Step Up
I-Line Male
I-Line Female
Bevel Seat Female
Bevel Seat Male
Tube and Vacuum
PAGElok™ Tube Adapter
PAGElok™ Tube
Compression Fitting
Buttweld
Buttweld for Tube
Buttweld for Pipe
304 Stainless (SS 304)
316 Stainless (SS 316)
316 Stainless (SS
Electropolished to 15Ra
Carbon Steel
Teflon Encapsulated
Hastelloy
Monel
4
6
E
C
T
H
M
Flange
Material
05
29
None
Carbon Steel
Epoxy Coated
O
07
17
08
304SS
316SS
4
6
Kynar
Polypropylene
Non Standard
K
P
X
40
4K
4L
4A
4B
4C
4F
42
43
48
49
45
46
38
D
Example: 16E4064L60-0060-4
Size: 1"
Style: SWPV
Construction: Wrapped Platinum Cured Silicone
Hose with SS Vacuum wire
End 1: 1" 316SS Sanitary Tri Clamp Fitting
39
End 2: 1" 316SS Sanitary Tri Clamp 90° Elbow Fitting
18
19
Length: 60-1/2" from end of Straight Tri-Clamp to
center line of 90° Elbow Tri-Clamp
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
15
Silicone
Size
Code
SPECIALTY HOSE
PAGE-flex SBF™
Rubber Covered Hose
Food Transfer Hose
NOMEX Hose
Specialty
High Pressure Hose
PARKER PAGE is recognized as a world leader in the design and
manufacture of custom hoses and fittings. Supreme flexibility,
superior bend radius, improved vacuum resistance and increased
hose life are just a few of the improvements we have made in our
hoses over the last couple of years. As demands in the industry
change, so do our products. Our engineers are continually
surveying the demands of the market and creating specialty
hoses and fittings to ensure our customers success.
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
16
Catalog Number 5162E
NOMEX BRAIDED HOSE
Seamless Convoluted PTFE with Nomex Braid
NCW & NCB seamless convoluted PTFE is Nomex braided
for extreme light weight, flexibility and kink resistance
that operates over a wide temperature range. Nomex
braided hoses are light weight alternatives to stainless
steel braided products with nearly the same temperature
resistance. These hoses have superior flexibility and
eliminate RFI issues seen in many applications having
stainless steel reinforcements.
Standard non-conductive and optional conductive, static
dissipative I.D. are available to the following specifications.
Factory Assemblies Only
Part
Number
Natural
Conductive
04-NCW
04-NCB**
06-NCW
06-NCB*
08-NCW
08-NCB*
12-NCW
12-NCB**
16-NCW
16-NCB**
Hose
I.D.
Hose
O.D.
Working
Pressure
Minimum
Burst Pressure
Vacuum
Rating
Minimum
Bend Radius
Weight
per Foot
Inch
(MM)
.260
(6.6)
.370
(9.4)
.500
(12.7)
.750
(19.1)
1.000
(25.4)
Inch
(MM)
.460
(11.7)
.560
(14.2)
.740
(18.8)
1.010
(25.7)
1.290
(32.8)
psi @ 72°F
(Bars @ 22°C)
725
(50)
400
(28)
280
(19)
200
(14)
200
(14)
psi @ 72°F
(Bars @ 22°C)
2900
(200)
1600
(110)
1125
(77.6)
800
(55.0)
800
(55.0)
In. Hg. @ 72°F
(Kg/Sq.CM @ 22°C)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
20.0
(1.0)
Inch
(MM)
1.0
(2.54)
1.5
(38.1)
2.0
(50.8)
2.5
(63.5)
4
(101.6)
Lbs.
(Kg/M)
.016
(.024)
.060
(.089)
.080
(.119)
.140
(.208)
.216
(.321)
NOTE: Factory Assemblies Only
Temperature range: -100ºF to +400ºF (-73ºC to +204ºC)
NCW – Available in all sizes.
NCB – * In Stock, ** Available on request.
NOTE 1: NCB Conductive (Static Dissipative) tube I.D. Surface Only.
NOTE 2: NCB Conductive Spec - Must conduct 20 microamps 1000 VDC potential 14” sample.
NOTE 3: Working pressures may vary depending on end connections.
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
17
Specialty
NCW (Natural) & NCB (Conductive)
PAGE-flex SBF™ HOSE ASSEMBLIES
Smoothbore With Convoluted Hose Flexibility
PAGE-flex SBFTM utilizes a smoothbore PFA tube, a bonded, wire braid - silicone - textile braided composite,
giving this product a superior bend radius, kink and vacuum resistance. This proprietary tube technology
can then be additionally reinforced with any application specific braid for working pressure and abrasion
resistance. The revolutionary design answers our customer’s demands for a flexible smoothbore product
utilizing the entire PARKER PAGE International Hose line of standard fittings.
PAGE-flex SBF™ Advantages
•Superior Flexibility
•Easily cleaned
•PPIH full line of optional reinforcement types
•Standard - Stainless Steel reinforced
Specialty
•-65°F to +325°F operating temperature range
(dependent on reinforcement type)
•Cooler outside temperatures reduces operator burns
•Reduces environment temperatures in confined areas
•Excellent for food and chemical transfer applications
½ the minimum bend
radius of conventional
smoothbore products
PAGE-flex SBF™ is
available in true bore sizes ³/8”,
½”, ¾”, 1” and 1 ½” with the
complete line of standard PPIH
crimp style fittings.
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
18
Catalog Number 5162E
SBFW - Non-Conductive
SBFB - Conductive - Special Order Only
Part
Number
Hose
I.D.
Hose
O.D.
Working
Pressure
Minimum
Burst
Pressure
Vacuum
Rating
Minimum Bend
Radius
Non
Conductive
Conductive
Inch
(MM)
Inch
(MM)
psi @ 72ºF
(Bars @ 22ºC)
psi @ 72ºF
(Bars @ 22ºC)
In. Hg. @ 72ºF
(Kg/Sq.CM @ 22ºC)
Inches
(MM)
06-SBFW
06-SBFB
0.375
(9.52)
0.625
(15.9)
300
(20.7)
1200
(82.7)
29.9
(1.0)
2.00
(50.8)
08-SBFW
08-SBFB
0.500
(12.7)
0.755
(19.2)
300
(20.7)
1200
(82.7)
29.9
(1.0)
2.50
(63.5)
12-SBFW
12-SBFB
0.750
(19.0)
1.040
(26.4)
250
(17.2)
1000
(69)
29.9
(1.0)
3.00
(76.2)
16-SBFW
16-SBFB
1.000
(25.4)
1.290
(32.8)
250
(17.2)
1000
(69)
29.9
(1.0)
4.00
(101.6)
24-SBFW
24-SBFB
1.500
(38.1)
1.850
(47.0)
200
(13.8)
800
(55.2)
29.9
(1.0)
7.00
(177.8)
Specialty
NOTE: Temperature range: -65ºF to +325ºF (-54ºC to +163ºC).
All ratings based upon 72ºF (22ºC).
Supplied as assemblies only
Working pressures and vacuum ratings may vary
depending upon end connections and process
and temperature parameters. All dimensions
nominal. Specifications are subject
to change without notice.
Non-Conductive Inner Tubing or Additional Braiding
Materials Available via Special Order
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
19
PAGE 944B/955B HIGH PRESSURE PTFE HOSE
Handles Pressures up to 5,500 psi
Specialty
Hydraulic systems seem to get more and
more demanding each day. Operating
temperatures are on the rise. Synthetic
hydraulic fluids are more in demand
and space is becoming more limited.
Requirements are for hose assemblies
designed to endure all of these conditions,
yet handle high working pressures while
maintaining peak flow rates. PARKER
PAGE 944B/955B High PSI hose assemblies
answer the challenge, delivering quality
performance under these demanding
circumstances.
PARKER PAGE 944B/955B High PSI
assemblies have a heavy wall of PTFE that
has excellent compatibility with a variety
of media. The PTFE tube has a static
dissipating liner that provides a path of
continuity to the end fittings for applications
where flow induced electrostatic charges
could occur and potentially damage the
hose assembly. The resilient PTFE tube
is reinforced with braided SS 304 wire.
Braiding, as opposed to spiraling, allows for
better flexibility and a tighter bend radius
in the finished hose while maintaining high
continuous working pressures. The stainless
steel wire braid also minimizes volumetric
expansion in hydraulic service.
Product Features:
• Up to 5,500 psi for non-impulse applications
• Static dissipating liner
• Excellent compatability with a variety of media
• Chemically inert
• Up to 6 layers of reinforcement
• Better flexibility than spiral hose
• Tighter bend radius than spiral hose
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
20
Catalog Number 5162E
944B – up to 4,500 PSI W.P. High Temp Hose
Features
ƒƒ High temperature hydraulic hose
ƒƒ Excellent chemical compatibility
ƒƒ Resists moisture
ƒƒ Low friction minimizes pressure drops
and deposits
Part
Number
ƒƒ Compressed air/gases
ƒƒ Paint striping
Nominal
I.D.
Maximum
O.D.
Maximum Working
Minimum
Pressure 73˚F/ 23˚C Bend Radius
Vac. Rating
Weight
Hg./73˚F
lbs
944B-4
inch
mm
inch
mm
psi
MPa
inch
mm
inch
15/64
6
.39
10
4,500
31.0
1.50
38
28
lbs./ft. kg./mtr.
.11
.16
944B-6
5/16
8
.49
12
4,500
31.0
2.50
64
28
.17
.24
944B-8
7/16
11
.62
16
4,500
31.0
2.88
73
28
.25
.35
Construction
Tube: Black static-dissipative PTFE
Reinforcement:
Multiple high density braids of 304
Stainless Steel
944B-10
1/2
13
.73
19
4,000
27.5
3.25
83
28
.31
.45
944B-12
5/8
16
.99
25
4,000
27.5
4.00
102
28
.74
1.05
Operating Parameters
944B-16
29/32
23
1.25
32
4,000
27.5
5.00
127
28
1.09
1.55
Temperature Range:
-65°F to +400°F (-54°C to +204°C)
Change in length at working pressure
is +2% to -2%
Burst Pressure
3x Max. Working Pressure
at 73°F (23°C)
955B – 5,500 PSI W.P. High Temp Hose
Features
Reduce working for impulse
applications to:
ƒƒ High temperature hydraulic hose
ƒƒ Excellent chemical compatibility
ƒƒ Resists moisture
ƒƒ Low friction minimizes pressure drops
and deposits
944B = 3000 psi wp
955B = 4000 psi wp
Fittings
Applications/Markets
ƒƒ General hydraulics
ƒƒ Chemical transfer
Part
Number
944 Factory-made assemblies only
94 Series
ƒƒ Compressed air/gases
955 Factory-made assemblies only
95 Series
Nominal
I.D.
Maximum
O.D.
Maximum Working
Minimum
Pressure 73˚F/ 23˚C Bend Radius
Vac. Rating
Hg./73˚F
Weight
lbs
955B-4
955B-6
inch
15/64
5/16
mm
6
8
inch
.50
.62
mm
13
16
psi
5,500
5,500
MPa
37.9
37.9
inch
3.00
5.00
mm
76
127
inch
28
28
955B-8
7/16
11
.75
19
5,500
37.9
5.75
146
28
.46
.68
955B-10
1/2
13
.91
23
5,500
37.9
6.50
165
28
.91
1.34
lbs./ft. kg./mtr.
.23
.24
.34
.35
955B-12
5/8
16
1.08
27
5,500
37.9
7.75
197
28
.92
1.36
955B-16
29/32
23
1.36
34
5,500
37.9
9.63
245
14
1.20
1.77
Notes
Factory-made assemblies only
Not suggested for steam-cold water
cycling applications
Proof pressure @ 50% of minimum
burst pressure
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
21
Specialty
Applications/Markets
ƒƒ General hydraulics
ƒƒ Chemical transfer
Both products
available in
assemblies with
carbon or stainless
steel female
JIC fittings
RUBBER COVERED FLUOROPOLYMER
Smoothbore with EPDM Rubber Cover
PARKER PAGE International Rubber Covered Fluoropolymer hoses
consist of an inner tube reinforced with multi-layered rubber, polyester
cord and double helix wire for support. PARKER PAGE hose can be
grounded via it’s internal helical wires and is available with a natural
fluoropolymer or a conductive black static dissipative fluoropolymer
inner core for applications where electrostatic dissipation is required.
The wire helix supports full vacuum service in all areas.
RCTW - NATURAL
STANDARD COLORS
Purple w/Silver Stripe................................½” - 4”
Conductive I.D. - Purple w/Yellow Stripe....½” - 2”
RCTB - CONDUCTIVE
Custom Colors available upon request
Specialty
RCTW (Natural)
RCTB (Conductive) Special Order Only
Part
Number
Natural
Conductive
08-RCTW
08-RCTB
12-RCTW
12-RCTB
16-RCTW
16-RCTB
20-RCTW
20-RCTB
24-RCTW
24-RCTB
32-RCTW
32-RCTB
40-RCTW
40-RCTB
48-RCTW
48-RCTB
64-RCTW
64-RCTB
Hose
I.D.
Hose
O.D.
Working
Pressure
Minimum Burst
Pressure
Vacuum
Rating
Minimum Bend
Radius
Weight
Inch
(MM)
0.500
(12.7)
0.750
(19.0)
1.000
(25.4)
1.250
(31.7)
1.500
(38.1)
2.000
(50.8)
2.500
(63.5)
3.000
(76.2)
4.000
(101.6)
Inch
(MM)
0.950
(24.1)
1.250
(31.7)
1.530
(38.8)
1.740
(44.2)
2.130
(54.1)
2.680
(68.0)
3.300
(83.8)
3.880
(98.6)
4.980
(126.5)
psi 72ºF
(Bars @ 22ºC)
500
(34.5)
500
(34.5)
450
(31.0)
375
(25.9)
375
(25.9)
300
(20.7)
200
(13.8)
200
(13.8)
150
(10.3)
psi @ 72ºF
(Bars @ 22ºC)
2000
(138.0)
2000
(138.0)
1800
(124.2)
1500
(103.5)
1500
(103.5)
1200
(82.7)
1000
(69.0)
1000
(69.0)
750
(51.7)
In. Hg. @ 72ºF
(Kg/Sq.CM @ 22ºC)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
29.9
(1.0)
Inch
(MM)
2.50
(63.5)
3.00
(76.2)
4.00
(101.6)
7.00
(177.8)
9.00
(228.6)
10.50
(266.7)
15.00
(381.0)
18.00
(457.2)
22.5
(571.5)
Lbs./Ft.
(Kg/M)
0.360
(0.535)
0.550
(0.819)
0.600
(0.892)
0.930
(1.384)
1.080
(1.607)
1.330
(1.979)
1.680
(2.500)
2.020
(3.006)
2.830
(4.211)
NOTE: Temperature range: -40ºF to +300ºF (-40ºC to +149ºC). Decrease working pressure one percent for every 2ºF above 212ºF.
Uses crimp collar RC300
Natural has a FEP inner core; Conductive has a PFA inner core and is a special order product.
See chemical resistance chart or contact PARKER PAGE International Sales for
specific material compatibility
Operating pressures shown are for non-impulse service. Reduce operating pressures by 1,000 PSI
for pump discharge nd similar impulse service applications.
High termperature burst pressure (@400°F) = minimum burst psi @ 72°F x .75
ratings
based
on 72°Fmaterials
(22°C) - All
dimensions
nominal
- Working
pressures
and vacuum
ratings
may177.1550,
vary depending
PARKERAllPAGE
Hose
product
are
compliant
with the
following
requirements:
FDA
21 CFR
177.2600 •
USP XXII Class VI Requirementsupon
• Pharmacopoeia
• ISO 10993
Sections 5,parameters.
6, 10, 11 • USDA Standards • 3A Standards
end connections3.1.9
and process
and temperature
22
Catalog Number 5162E
CRIMP FITTINGS
Two Piece 316 Stainless Steel
Works on the following hose types
The Part # Column for PAGE Crimp
Fittings indicates material type.
Where applicable, “B” indicates
Brass and “C” indicates Carbon Steel
and “S” indicates Stainless Steel.
For detailed ordering information,
contact PARKER PAGE Int’l Hose.
Rubber Covered
Fluoropolymer
Convoluted SS Braid
Convoluted
Non-Metallic Braid
Silicone Hose & Tubing
PAGE Fittings
Smooth True Bore
Sanitary Fittings
SAN-S - Sanitary Tri Clamp
316 Stainless Steel
Dash
Number
Part
Number
Dash
Number
Part
Number
-08
08-08SAN-S
-32
32-32SAN-S
-12
12-12SAN-S
-40
40-40SAN-S
-16
16-16SAN-S
-48
48-48SAN-S
-24
24-24SAN-S
-64
64-64SAN-S
23
CRIMP FITTINGS
Sanitary
SAN-S - Sanitary Tri Clamp Step Up
PAGE Fittings
316 Stainless Steel
Dash
Number
Part
Number
Dash
Number
Part
Number
-06
06-24SAN-S
-24
20-24SAN-S
-08
08-16SAN-S
-24
24-32SAN-S
-08
08-24SAN-S
-32
32-40SAN-S
-12
12-24SAN-S
-40
40-48SAN-S
-16
16-24SAN-S
-48
48-64SAN-S
MSAN-S - Mini - Sanitary Fittings
316 Stainless Steel
Dash
Number
Part
Number
Dash
Number
Part
Number
-04
04-04MSAN-S
-08
08-08MSAN-S
-04
04-08MSAN-S
-08
08-12MSAN-S
-06
06-06MSAN-S
-12
12-12MSAN-S
-06
06-08MSAN-S
-16
16-12MSAN-S
-06
06-12MSAN-S
24
Catalog Number 5162E
CRIMP FITTINGS
Sanitary
FBS-S Female Bevel Seat Sanitary
MBS-S Male Bevel Seat Sanitary
316 Stainless Steel
316 Stainless Steel
Part
Number
16-16FBS-S
16-16MBS-S
24-24FBS-S
24-24MBS-S
32-32FBS-S
32-32MBS-S
40-40FBS-S
40-40MBS-S
48-48FBS-S
48-48MBS-S
64-64FBS-S
64-64MBS-S
FIL-S Female I-Line Sanitary
PAGE Fittings
Part
Number
MIL-S Male I-Line Sanitary
316 Stainless Steel
316 Stainless Steel
Part
Number
Part
Number
16-24FIL-S
16-24MIL-S
24-32FIL-S
24-32MIL-S
32-32FIL-S
32-32MIL-S
40-40FIL-S
40-40MIL-S
48-48FIL-S
48-48MIL-S
25
CRIMP FITTINGS
Sanitary
Typical Dimensions for Sanitary Fittings
PAGE Fittings
These actual size drawings are provided to eliminate sizing errors when specifying sanitary fittings. The outside
diameter is the same for 1/8”, 1/4”, 3/8”, 1/2” and the 3/4” (mini) styles. For your convenience and ordering accuracy,
all of these drawings may be used as sizing, I.D. and O.D. patterns. These fittings are ASME-BPE compliant.
26
Catalog Number 5162E
CRIMP FITTINGS
Sanitary
PAGE Fittings
Typical Dimensions for Sanitary Fittings
27
CRIMP FITTINGS
Flange
SFR-S
Flange Retainer
Part
Number
Part
Number
08-08SFR-S
32-32SFR-S
12-12SFR-S
40-40SFR-S
16-16SFR-S
48-48SFR-S
20-20SFR-S
64-64SFR-S
24-24SFR-S
NOTE: Flange retainers do not include Flanges.
TEFR-S
Encapsulated Flange Retainer
12-12TEFR-S
Part
Number
32-32TEFR-S
16-16TEFR-S
40-40TEFR-S
20-20TEFR-S
48-48TEFR-S
24-24TEFR-S
64-64TEFR-S
PAGE Fittings
Part
Number
NOTE: This product is a Non-Standard item.
PF
150# Flanges for Flange Retainer
Carbon Steel
(Epoxy Coated)
316
Stainless Steel
304
Stainless Steel
08-PF150
08-PF156
08-PF154
12-PF150
12-PF156
12-PF154
16-PF150
16-PF156
16-PF154
20-PF150
20-PF156
20-PF154
24-PF150
24-PF156
24-PF154
32-PF150
32-PF156
32-PF154
40-PF150
40-PF156
40-PF154
48-PF150
48-PF156
48-PF154
64-PF150
64-PF156
64-PF154
NOTE: Also available - 300# Flanges.
Available in: Kynar® - Polypropylene - Monel®
Hastelloy® - CPVC
Monel™ is a registered trademark of Atofina. Kynar® is a registered trademark of Elf Autochem, NA Hastelloy® is
a registered trademark of Haynes International.
28
Catalog Number 5162E
CRIMP FITTINGS
Cam & Groove
C-S and CL-S
Female Cam and Groove Swivel
Part
Number
Part
Number
08-12C-S
32-32CL-S
12-12C-S
40-40CL-S
16-16CL-S
48-48CL-S
20-20CL-S
64-64CL-S
24-24CL-S
NOTE: CL Supplied w/locking arms only.
E-S
Part
Number
Part
Number
08-12E-S
32-32E-S
12-12E-S
40-40E-S
16-16E-S
48-48E-S
20-20E-S
64-64E-S
24-24E-S
TEC-S and TECL-S
Encapsulated Female Cam
Part
Number
Part
Number
12-12TEC-S
32-32TECL-S
16-16TECL-S
40-40TECL-S
20-20TECL-S
48-48TECL-S
24-24TECL-S
NOTE: CL Supplied w/locking arms only. Also available w/
conductive encapsulated insert.
Call for available sizes. This product is a Non-Standard item.
29
PAGE Fittings
Male Cam Lock
CRIMP FITTINGS
Cam & Groove
TEE-S
Encapsulated Male Cam
Part
Number
Part
Number
12-12TEE-S
32-32TEE-S
16-16TEE-S
40-40TEE-S
20-20TEE-S
48-48TEE-S
24-24TEE-S
NOTE: This product is a Non-Standard item.
TEFLA-S
Encapsulated Flange X Male Cam Adapter
Part
Number
PAGE Fittings
12-12TEFLA-S
16-16TEFLA-S
20-20TEFLA-S
24-24TEFLA-S
32-32TEFLA-S
48-48TEFLA-S
NOTE: Does not include Flange. To order as a
complete unit use XX-TEFLA-316 (316 Stainless
Flange only) This product is a Non-Standard item.
TESG
Encapsulated Silicone Gasket
Part
Number
Part
Number
08TESG
32TESG
12TESG
40TESG
16TESG
48TESG
20TESG
64TESG
24TESG
30
Catalog Number 5162E
CRIMP FITTINGS
Industrial
MP
Male Pipe (NPT) Hex
Part
Number
Part
Number
04-02MP-S
16-16MP-S, C
04-04MP-S, C
20-20MP-S, C
06-04MP-S
24-24MP-S, C
06-06MP-S, C
32-32MP-S, C
08-06MP-S
40-40MP-S, C
08-08MP-S, C
48-48MP-S, C
12-12MP-S, C
64-64MP-S, C
NOTE: S= 316L Stainless Steel C= Plated Carbon Steel
FP
Part
Number
Part
Number
04-04FP-S
16-16FP-S
06-06FP-S
20-20FP-S
08-08FP-S
24-24FP-S
12-12FP-S
32-32FP-S
FJX
Female JIC Swivel
Part
Number
Part
Number
04-04FJX-S, C
20-20FJX-S, C
06-06FJX-S, C
24-24FJX-S, C
08-08FJX-S, C
32-32FJX-S, C
12-12FJX-S, C
40-40FJX-S
16-16FJX-S, C,
NOTE: S= 316L Stainless Steel C= Plated Carbon Steel
FORFS
Female O-Ring Face Seal
Part
Number
Part
Number
04-04F0RFS-S
16-16F0RFS-S
06-06F0RFS-S
20-20F0RFS-S
08-08F0RFS-S
24-24F0RFS-S
12-12F0RFS-S
31
PAGE Fittings
Female Pipe (NPT) Hex
CRIMP FITTINGS
Weld
BWT-S
Buttweld Tube
Part
Number
Part
Number
08-08BWT-S
24-32BWT-S
12-12BWT-S
32-32BWT-S
16-16BWT-S
40-40BWT-S
20-20BWT-S
48-48BWT-S
NOTE: Standard wall thickness 0.065” (1.65mm)
24-24BWT-S
BWP40-S
PAGE Fittings
Buttweld Pipe (Schedule 40)
Part
Number
Part
Number
08-08BWP40-S
24-32BWP40-S
12-12BWP40-S
32-32BWP40-S
16-16BWP40-S
40-40BWP40-S
16-24BWP40-S
48-48BWP40-S
24-24BWP40-S
64-64BWP40-S
NOTE: Schedule 5 and 10 also available.
INSTRUMENTATION FITTINGS
TUBE-S
Pagelok™ Tube Adapter
PLCF-S
Pagelok™ Compression (2 Ferrule Designs)
Part
Number
Part
Number
04-04-TUBE-S
04-04PLCF-S
06-06-TUBE-S
06-06PLCF-S
08-08-TUBE-S
08-08PLCF-S
12-12-TUBE-S
12-12PLCF-S
16-16-TUBE-S
16-16PLCF-S
20-20-TUBE-S
NOTE: Metric tube sizes available
32
Catalog Number 5162E
COLLARS
Parker PAGE fittings are unique because the collars are designed to
keep inventory at a minimum. Where possible, collars are designed to fit
hoses by size rather than by hose series. This means that a 06-SC300 will
work on many convoluted hoses rather than only on one specific series
of hose.
ST300
For use with STW/STB
(also available in carbon steel “CS”)
Part
Number
Part
Number
04-ST300
16-ST300
06-ST300
20Z-ST300
08-ST300
24Z-ST300
Collars
12-ST300
SC300
For use with SCW/SCB, SCWV/SCBV, CWV/CBV, NCW/NCB,
NCWV/NCBV (also available in carbon steel “CS”)
Part
Number
Part
Number
06-SC300
24-SC300
08-SC300
32-SC300
12-SC300
48-SC300
16-SC300
65-SC300
20-SC300
PC300
For use with PCW/PCB, PCWV/PCBV
(also available in carbon steel ”CS”)
Part
Number
Part
Number
06-PC300
16-PC300
08-PC300
24-PC300
12-PC300
32-PC300
33
COLLARS
SBF300
For use with SBF
Part
Number
Part
Number
06-SBF300
16-SBF300
08-SBF300
224-SBF300
12-SBF300
SIL300
For use with SBP/SWPV, CWPV
Part
Number
Part
Number
08-SIL300
24-SIL300
12-SIL300
32-SIL300
Collars
16-SIL300
RC300
For use with RCTW/RCTB
Part
Number
Part
Number
08-RC300
24-RC300
12-RC300
32-RC300
16-RC300
48-RC300
20-RC300
64-RC300
34
Catalog Number 5162E
INDUSTRIAL SMOOTHBORE ADAPTERS
For JIC To NPT
2404
2404 Series Permanent
Male Pipe Adapter
NOTE: Please add S, C or B
to Denotes material.
B = Brass
C = Carbon Steel
S = Stainless Steel
2405
NOTE: Please add S, C or B
to Denotes material.
B = Brass
C = Carbon Steel
S = Stainless Steel
Male Pipe Adapter 90º Elbow
Part
Number
Brass
Carbon Steel
Stainless Steel
-03
2404-03-02-
-04
2404-04-02-
JIC
Thread Size
Pipe
Thread Size
B, C, S
3/8” - 24
1/8” - 27
B, C, S
7/16” - 20
1/8” - 27
1/4” - 18
-04
2404-04-04-
B, C, S
7/16” - 20
-05
2404-05-04-
B, C, S
1/2” - 20
1/4” - 18
-06
2404-06-04-
B, C, S
9/16” - 18
1/4” - 18
-06
2404-06-06-
B, C, S
9/16” - 18
3/8” - 18
-08
2404-08-06-
B, C, S
3/4” - 16
3/8” - 18
-08
2404-08-08-
B, C, S
3/4” - 16
1/2” - 14
-10
2404-10-08-
B, C, S
7/8” - 14
1/2” - 14
-12
2404-12-12-
B, C, S
1-1/16” - 12
3/4” - 14
-16
2404-16-16-
B, C, S
1-5/16” - 12
1” - 11-1/2
-20
2404-20-20-
B, C, S
1-5/8” - 12
1-1/4” - 11-1/2
Brass
Carbon Steel
Stainless Steel
JIC
Thread Size
Pipe
Thread Size
2405 Series Permanent
Female Pipe Adapter
2501
Hose
Number
Hose
Number
Part
Number
-04
2405-04-02-
B, C, S
7/16” - 20
1/8” - 27
-04
2405-04-04-
B, C, S
7/16” - 20
1/4” - 18
-05
2405-05-04-
B, C, S
1/2” - 20
1/4” - 18
-06
2405-06-04-
B, C, S
9/16” - 18
1/4” - 18
-06
2405-06-06-
B, C, S
9/16” - 18
3/8” - 18
-08
2405-08-06-
B, C, S
3/4” - 16
3/8” - 18
-08
2405-08-08-
B, C, S
3/4” - 16
1/2” - 14
-10
2405-10-08-
B, C, S
7/8” - 14
1/2” - 14
-12
2405-12-12-
B, C, S
1-1/16” - 12
3/4” - 14
-16
2405-16-16-
B, C, S
1-5/16” - 12
1” - 11-1/2
2501 Series Permanent
Part
Number
2501-04-04 - (S, C, B)
2501-06-06 - (S, C, B)
2501-08-08 - (S, C, B)
2501-12-12 - (S, C, B)
2501-16-16 - (S, C, B)
35
NOTE: Please add S, C or B
to Denotes material.
B = Brass
C = Carbon Steel
S = Stainless Steel
Adapters
PARKER PAGE JIC (SAE) to NPT
Adapters are designed to be used
with any PARKER PAGE Field
Attachable Fittings that have
Female JIC (SAE) 37° swivels.
PARKER PAGE adapters allow an
effortless connection between
Industrial smoothbore PTFE Hose
assemblies with Female JIC (SAE)
37° swivels connecting to Pipe
Threads (NPT). These adapters
can simplify the most difficult
assembly routing problems by
eliminating the need to rotate
the hose assembly in order to
make a threaded connection. By
simply loosening the swivel ends
and extracting the old assembly,
a replacement assembly with
swivel ends can be installed in
minutes. PARKER PAGE Adapters
are available in most common
industrial configurations in 316
Stainless Steel, Carbon Steel and
Brass.
Nominal Hose
INDUSTRIAL
HOSE & FITTINGS
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
36
Catalog Number 5162E
INDUSTRIAL SMOOTHBORE - PTFE HOSE
(.030 Wall) Standard Wall Smooth Bore PTFE Hose
The S30 Series hose is manufactured in natural or with an inner conductive static dissipating liner that
provides continuity between the end fittings for applications where flow induced electrostatic charges could
be a potential hazard. Use with Field Attachable fittings, page 51.
S30 (Natural) & S30B (Conductive)
PTFE with Stainless Steel Braid
Dash
Number
Part Number
Natural
Hose
I.D.
Conductive
Hose
O.D.
Bend
Radius
psi
Burst Pressure
-03
03-S30
03-S30B
.125
.250
1.5
3000
12000
-04
04-S30
04-S30B
.187
.305
2.0
3000
12000
-05
05-S30
05-S30B
.250
.375
3.0
3000
12000
-06
06-S30
06-S30B
.312
.430
4.0
2500
10000
-08
08-S30
08-S30B
.406
.535
5.0
2000
8000
-10
10-S30
10-S30B
.500
.636
6.5
1750
7000
-12
12-S30
12-S30B
.625
.765
7.5
1500
6000
-16
16-S30
16-S30B
.875
1.030
9.0
1000
4000
NOTE: Temperature Range: -100°F to +450°F (-73°C to 232°C)
S30 - Natural
S30B- Conductive
(Static Dissipative)
PAGE S40 Series hose is manufactured as above, however, with a minimum wall thickness of .040” resulting
in 33% more PTFE than other manufacturers. The additional tubing thickness provides an improved bend
radius, greater kink resistance and decreased gas permeation. Use with Field Attachable fittings, page 51.
S40 (Natural) & S40B (Conductive)
PTFE Heavy Wall with Stainless Steel Braid
Dash
Number
Part Number
-03
-04
-05
-06
-08
-10
-12
-16
-16Z
Natural
03-S40
04-S40
05-S40
06-S40
08-S40
10-S40
12-S40
16-S40
16Z-S40*
Conductive
03-S40B
04-S40B
05-S40B
06-S40B
08-S40B
10-S40B
12-S40B
16-S40B
16Z-S40B*
-20Z
20Z-S40*
20Z-S40B*
Hose
I.D.
Hose
O.D.
Bend
Radius
psi
Burst Pressure
.125
.187
.250
.312
.406
.500
.625
.875
.875
.250
.320
.375
.435
.565
.656
.780
1.050
1.100
1.0
1.5
2.0
3.5
4.5
5.0
6.0
9.0
7.3
3000
3000
3000
2500
2000
1750
1500
1000
1250
12000
12000
12000
10000
8000
7000
6000
4000
5000
1.125
1.350
11.0
1000
4000
NOTE: Temperature Range: -100°F to +450°F (-73°C to 232°C) *Z indicates Double Braid
S40 - Natural
S40B- Conductive
(Static Dissipative)
See page 38 for Part Numbering System
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
37
Nominal Hose
(.040 Wall) Heavy Wall Smooth Bore PTFE Hose
INDUSTRIAL SMOOTHBORE - PTFE HOSE
S30 Standard Wall & S40 Heavy Wall Part Numbering System
Assembly
Code
Size
Code
Hose
Code
Assembly
Code
X
Field
Attachable
FA
Size
Code
03
04
05
06
08
10
12
16
20
Nominal Hose
Hose
Code
S30
S30B
S40
S40B
ZS40
ZS40B
MaxPac HiPSI**
Fitting
Material
End 1
Fitting
End 2
Fitting
Material
End 2
Flange
Material
Fitting
Code
Permanently
Attached
1/8"
3/16"
1/4"
5/16"
13/32"
1/2"
5/8"
7/8"
1-1/8"
Fitting
End 1
S
SB
H
HB
R
RB
W
**MaxPac™ Hose is
available with Black
Conductive Tube and
Female Stainless
Steel, 37° JIC Swivel
Fittings only
Pipe Thread Fittings
Male Pipe NPT Hex
Male Pipe NPT Step Up
Male Pipe NPT Step Down
Male Union
Male Union 45°
Male Union 90°
Male Union Step Up
Male Union Step Down
Female Pipe NPT Hex
Female Pipe Step Up
Female Pipe Step Down
Female Union
Female Union Step Up
Female Union Step Down
JIC Fittings
JIC Female Swivel
JIC Female 45° Elbow
JIC Female 90° Elbow
SAE Female Swivel
SAE Female 45° Elbow
SAE Female 90° Elbow
JIC Female Step Up
JIC Female Step Down
Tube Stub Fittings
Tube Stub
Tube Stub Step Up
Tube Stub Step Down
SAE Male Compression
SAE Female Compression
-
-
Length in Inches
Fitting
Material
10
15
20
11
14
19
16
21
55
58
59
80
84
88
68
66
67
69
70
71
64
65
91
93
95
96
97
Inverted Flare & Power Trim Fittings
Male Straight
76
Stainless (SS)
Brass
Carbon Steel
Length in
1/8"
increments
Accessory
Code
Accessory
Code*
S
B
C
None
Spring Guard
Armour Guard
End Bend Restrictors
Fire Sleeve
Rubber Sleeve
FEP Heat Shrink
Polyolefin Heat Shrink
Silicone Sleeve
Internal Spring
Vacuum Spring Wire
Specials
S
A
E
F
H
T
P
M
I
W
X
*See Accessory Section
for Details
= Optional
Example: X08H10S68S0-0300
Size: 08 (13/32 I.D.)
Style: S40
Braid: SS Single Braid
Core: Heavy Wall Smoothbore Convoluted PTFE
End 1: 1/2" 314 SS Male NPT
End 2: 1/2" 316 SS Female 37° Seat JIC Swivel
Length: 300" from end of Male Pipe to seat of Female JIC
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
38
Catalog Number 5162E
PERMANENT & FIELD ATTACHABLE FITTINGS
FOR S30/S40 Hoses
Series 91N & Series 90
PARKER PAGE engineers design and manufacture Permanent and Field Attachable Fittings to accommodate
our Industrial Smoothbore PTFE S30 and S30B (.030” wall) hose styles.
Expensive assembly equipment is not required to build a custom hose assembly with PARKER PAGE Field
Attachable Fittings. They can be assembled with common bench tools, for example, a clamping vise and an
adjustable wrench. This convenience allows lower volume users and those working in remote locations both
the accessibility and availability to fabricate Industrial Smoothbore PTFE hose assemblies. Most commonly
used industrial configurations, including Male Pipe (NPT) and Female JIC (SAE) 37° swivel fittings, are
available in 300 Series Stainless Steel and Carbon Steel.
1
03
91
8
6
N/A
Type
End
Configuration
Code
Series of
Fitting
End Size
Hose Size
Material
This example describes a permanent crimp 1/2" Male JIC 37° hose end with a 3/8" hose end-this commonly
referred to as a "jump size". This fitting is constructed from carbon steel since the designated material is blank.
The callout is: 10391N-8-6
90/91N Fittings
The Part # Column for 91N Series Fittings
indicates material type. Where applicable, “B”
indicates Brass and “C” indicates Stainless
Steel. For detailed ordering information, contact
PARKER PAGE Int’l Hose.
39
(+) Non-Standard. Contact Customer Service for availability.
PERMANENT FITTINGS - 91N SERIES
10191N Male Taper Pipe Rigid
91N Series Permanent
A
B
*Part
Number
B
NPTF
Thread Size
C
10191N-2-4
H
Cutoff
Allow. B
A
H
Hex
Inch
Inch
MM
Inch
MM
Inch
1/8-27
-4
1.27
32
3/4
19
7/16
10191N-4-4
+
1/4-18
-4
1.50
38
15/16
24
9/16
10191N-4-5
+
1/4-18
-5
1.55
39
15/16
24
9/16
10191N-4-6
+
1/4-18
-6
1.60
41
15/16
24
9/16
10191N-6-6
+
3/8-18
-6
1.65
58
1
25
11/16
10191N-6-8
+
3/8-18
-8
1.71
43
1
25
11/16
10191N-8-8
+
1/2-14
-8
1.94
49
1-1/4
32
7/8
10191N-8-10
+
1/2-14
-10
1.96
50
1-1/4
32
7/8
10191N-8-12 (+)
+
1/2-14
-12
2.42
61
1-1/4
32
7/8
10191N-12-12
+
3/4-14
-12
2.19
56
1-3/8
35
1-1/8
10191N-16-16
+
1-11-1/2
-16
2.46
62
1-1/2
38
1-3/8
1-1/4-11-1/2
-20
3.05
77
2-1/16
52
1-3/4
+
10191-20-20
* Brass nipple, steel shell.
B – Brass nipple, brass shell.
C – All components 303 stainless steel.
10391N Male (JIC) 37°
91N Series Permanent
A
*Part
Number
90/91N Fittings
B
H
B
NPTF
Thread Size
C
Cutoff
Allow. B
A
H
Hex
Inch
Inch
MM
Inch
MM
Inch
7/16-20
-4
1.37
35
13/16
21
1/2
10391N-4-4
+
+
10391N-5-5
+
+
1/2-20
-5
1.48
38
7/8
22
9/16
10391N-6-6 (+)
+
+
9/16-18
-6
1.64
42
1
25
11/16
10391N-8-8
+
+
3/4-16
-8
1.79
35
1-1/8
29
7/8
10391N-8-6
+
+
3/4-16
-6
1.73
44
1-1/16
27
7/8
10391N-10-10
+
+
7/8-14
-10
2.07
53
1-3/8
35
7/8
10391N-12-12
+
+
1-1/16-12
-12
2.10
53
1-5/16
33
1-1/8
10391N-16-16
+
+
1-5/16-12
-16
2.43
62
1-1/2
38
1-3/8
* Brass nipple, steel shell.
B – Brass nipple, brass shell.
C – All components 303 stainless steel.
(+) Non-Standard. Contact Customer Service for availability.
40
Catalog Number 5162E
PERMANENT FITTINGS - 91N SERIES
10691N SAE (JIC) 37° Swivel
91N Series Permanent
*Part
Number
A
B
S
B
C
Tube
Size
Thread Size
10691N-4-4 ~
10691N-5-5 ~
+
10691N-6-6
J
H
10691N-6-8
+
10691N-8-8 ~
10691N-8-10 ~
+
+
+
H
Hex
J
Hex
Inch
Inch
Inch
MM
Inch
MM
Inch
Inch
7/16-20
-4
1/4
1.43
36
7/8
22
3/8
9/16
45°
37°
Cutoff
Allow. B
A
1/2-20
-5
5/16
1.56
40
15/16
24
7/16
5/8
9/16-18
-6
3/8
1.63
41
1
25
1/2
11/16
9/16-18
-8
1/2
1.69
43
1
25
9/16
11/16
+
3/4-16
-8
1/2
1.89
48
1-3/16
30
11/16
7/8
+
3/4-16
-10
5/8
1.86
58
1-1/8
29
3/4
7/8
10691N-10-10 ~
+
7/8-14
-10
5/8
2.03
52
1-5/16
33
13/16
1
10691N-12-12
+
1-1/16-12
-12
3/4
2.12
54
1-5/16
33
1
1-1/4
10691N-16-16
+
1-5/16-12
-16
1
2.45
62
1-9/16
40
1-1/4
1-1/2
+
1-5/8-12
-20
1-1/4
2.98
76
10691-20-20
+
46
2
* Brass nipple, steel nut, shell.
S – Steel nipple, nut and shell.
B – Brass nipple, brass nut, shell.
C – All components 303 stainless steel.
These fittings contain a dual seat that accepts both the JIC (37 deg.) and SAE (45 deg.) male configurations.
The size -6 and -12 swivel fittings are shown under part number 10891N.
10691NRD
91N Series Permanent
Tube
Size
Cutoff
Allow. B
A
J
Hex
B
C
Thread
Size
Inch
Inch
Inch
MM
Inch
MM
Inch
10691N-4-4-RD ~ (+)
+
+
7/16-20
-4
1/4
1.34
34
13/16
21
9/16
10691N-5-5-RD ~ (+)
+
+
1/2-20
-5
5/16
1.51
38
7/8
22
5/8
10691N-6-6-RD (+)
+
+
9/16-18
-6
3/8
1.60
41
15/16
24
11/16
10691N-8-8-RD ~ (+)
+
+
3/4-16
-8
1/2
1.79
45
1-1/16
27
7/8
10691N-10-10-RD ~
+
+
7/8-14
-10
5/8
1.91
49
1-3/16
30
1
10691N-12-12-RD
+
+
1-1/16-12
-12
3/4
2.09
58
1-5/16
33
1-1/4
10691N-16-16-RD ~ (+)
+
+
1-5/16-12
-16
1
2.27
58
1-5/16
33
1-1/2
* Brass nipple, steel nut, shell.
B – Brass nipple, brass nut, shell.
C – All components 303 stainless steel.
These fittings contain a dual seat that accepts both the JIC (37 deg.) and SAE (45 deg.) male configurations.
The size -6 and -12 swivel fittings are shown under part number 10891N.
41
(+) Non-Standard. Contact Customer Service for availability.
90/91N Fittings
*Part
Number
PERMANENT FITTINGS - 91N SERIES
10791N Female Pipe Swivel
91N Series Permanent
B
A
30°
H
J
*Part
Number
B
10791N-4-4
+
Thread
Size
Inch
1/4-18
-4
C
Tube
Size
Cutoff
Allow. B
A
H
Hex
J
Hex
Inch
Inch
MM
Inch
MM
Inch
Inch
1/4
1.50
38
15/16
24
9/16
11/16
10791N-6-6
+
3/8-18
-6
3/8
1.67
42
1
25
5/8
7/8
10791N-8-8
+
1/2-14
-8
1/2
1.83
46
1-1/8
29
3/4
1
10791N-12-12
+
3/4-14
-12
3/4
2.09
53
1-5/16
33
1
1-1/4
10791N-16-16
+
1-11-1/2
-16
1
2.26
57
1-5/16
33
1-3/16
1-3/8
Cutoff
Allow. B
H
Hex
J
Hex
* Brass nipple, steel nut and shell.
B – Brass nipple, brass nut and shell.
C – All components 300 series stainless steel.
10891N SAE 45° Swivel
91N Series Permanent
A
B
45°
*Part
Number
H
J
S
10891N-6-6
10891N-12-12
+
Tube
Size
A
C
Thread
Size
Inch
Inch
Inch
MM
Inch
MM
Inch
Inch
+
5/8-18
-6
3/8
1.69
43
1-1/16
27
5/8
3/4
+
1-1/16-14
-12
3/4
2.12
54
1-5/16
33
1
1-1/4
* Brass nipple, steel nut and shell.
S – Steel nipple, nut and shell.
C – All components 300 series stainless steel.
90/91N Fittings
12891N Male Inverted Swivel–Straight
91N Series Permanent
B
A
45°
J
*Part
Number
B
12891N-4-4
+
C
+
Thread
Size
Inch
7/16-24
Tube
Size
Cutoff
Allow. B
A
J
Hex
Inch
Inch
MM
Inch
MM
Inch
-4
1/4
2.09
53
1-1/2
38
7/16
12891N-5-5
+
+
1/2-20
-5
5/16
2.15
55
1-9/16
40
1/2
12891N-5-6
+
+
1/2-20
-6
3/8
2.23
57
1-9/16
40
1/2
12891N-6-6
+
+
5/8-18
-6
3/8
2.23
57
1-9/16
40
5/8
12891N-8-8
+
+
3/4-18
-8
1/2
2.31
59
1-5/8
41
3/4
12891N-10-10
+
+
7/8-18
-10
5/8
2.43
58
1-3/4
44
7/8
12891N-12-12
+
+
1-1/16-16
-12
3/4
2.50
64
1-11/16
43
1-1/16
* Steel nipple, tube, nut and shell.
B – Steel nipple, tube, nut and shell.
C – All components 300 series stainless steel.
(+) Non-Standard. Contact Customer Service for availability.
42
Catalog Number 5162E
PERMANENT FITTINGS - 91N SERIES
13491N Straight Tube
91N Series Permanent
Tube
Size
A
B
Cutoff
Allow. B
A
*Part
Number
B
C
Inch
Inch
Inch
MM
Inch
MM
13491N-8-8
+
+
-8
1/2
2.80
71
2-1/8
54
13491N-8-10
+
+
-10
1/2
2.80
71
2-1/8
54
13491N-10-10
+
+
-10
5/8
2.96
75
2-1/4
58
13491N-12-12
+
+
-12
3/4
3.37
86
2-9/16
65
The 16T91N fitting includes 13491N with the 60HAB sleeve and 61HAB nut.
* Brass nipple, steel shell.
B – Brass nipple, brass nut, shell.
C – All components 303 stainless steel. C – All components 303 stainless steel.
13791N JIC 37° Swivel 45° Elbow
91N Series Permanent
A
*Part
Number
C
Thread Size
Inch
E
37°
J
13791N-4-4
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
7/16-20
-4
1/4
1.74
44
1-3/16
30
0.33
8
9/16
1/2-20
-5
5/16
1.87
47
1-1/4
32
0.36
9
5/8
13791N-6-6
9/16-18
-6
3/8
1.94
49
1-5/16
33
0.39
10
11/16
13791N-8-8
3/4-16
-8
1/2
2.28
58
1-9/16
37
0.55
14
7/8
13791N-10-10
7/8-14
-10
5/8
2.42
61
1-11/16
43
0.64
43
1
13791N-5-5
+
13791N-12-12
+
1-1/16-12
-12
3/4
2.83
58
2-1/16
52
0.78
20
1-1/4
13791N-16-16
+
1-5/16-12
-16
1
3.18
81
2-1/4
57
0.89
23
1-1/2
13791-20-20
+
1-5/8-12
-20
1-1/4
3.67
93
2-9/16
65
1.10
28
2
* Steel tube, nipple, nut and shell.
B – Brass nipple, brass shell.
C – All components 303 stainless steel.
43
(+) Non-Standard. Contact Customer Service for availability.
90/91N Fittings
B
PERMANENT FITTINGS - 91N SERIES
13991N JIC 37° Swivel 90° Elbow
91N Series Permanent
A
B
*Part
Number
C
13991N-4-4
E
37°
Thread
Size
Inch
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
9/16
7/16-20
-4
1/4
1.62
41
1-1/16
37
0.68
17
13991N-5-5
+
1/2-20
-5
5/16
1.71
43
1-1/8
29
0.77
20
5/8
13991N-6-6
+
9/16-18
-6
3/8
1.91
49
1-1/4
32
0.85
22
11/16
13991N-8-8
3/4-16
-8
1/2
2.03
52
1-5/16
33
1.09
28
7/8
13991N-10-10
7/8-14
-10
5/8
2.27
58
1-9/16
37
1.23
43
1
13991N-12-12
+
1-1/16-12
-12
3/4
2.75
58
1-15/16
49
1.82
46
1-1/2
13991N-16-16
+
1-5/16-12
-16
1
3.15
80
2-3/16
56
2.14
52
1-1/2
13991-20-20
+
1-5/8-12
-20
1-1/4
3.53
90
2-7/16
62
1.18
30
2
* Steel tube, nipple, nut and shell.
C – All components 303 stainless steel.
14191N JIC 37° Swivel 90° Long Elbow
91N Series Permanent
A
B
37°
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
Thread
Size
Inch
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
7/16-20
-4
1/4
1.66
42
1-1/8
29
1.80
46
9/16
C
14191N-4-4
E
90/91N Fittings
*Part
Number
14191N-5-5
+
1/2-20
-5
5/16
1.72
44
1-1/8
29
1.77
45
5/8
14191N-6-6
+
9/16-18
-6
3/8
1.93
49
1-5/16
33
2.18
55
11/16
7/8
14191N-8-8
+
3/4-16
-8
1/2
2.11
54
1-3/8
35
2.43
62
14191N-10-10
+
7/8-14
-10
5/8
2.34
59
1-5/8
41
2.57
43
1
14191N-12-12
+
1-1/16-12
-12
3/4
2.63
58
1-7/8
48
3.73
95
1-1/4
14191N-16-16
+
1-5/16-12
-16
1
3.15
80
2-3/16
56
4.33
110
1-1/2
14191N-20-20 (+)
+
1-5/8-12
-20
1-1/4
4.00
102
2-15/16
75
5.28
134
2
* Steel tube, nipple, nut and shell.
C – All components 303 stainless steel.
16191N Compression Air Brake
91N Series Permanent
*Part
Number
B
C
Thread
Size
Inch
16191N-8-8
+
+
11/16-20
-8
Tube
Size
Cutoff
Allow. B
A
J
Hex
Inch
Inch
MM
Inch
MM
Inch
1/2
1.61
41
15/16
24
3/4
16191N-8-10
+
+
11/16-20
-10
5/8
1.61
41
15/16
24
7/8
16191N-10-10
+
+
13/16-18
-10
5/8
1.82
46
1-1/8
29
15/16
16191N-12-12
+
+
1-18
-12
3/4
1.93
49
1-1/8
29
1-1/4
* Brass nipple, steel shell.
(+) Non-Standard. Contact Customer Service for availability.
B – Brass nipple, brass shell.
44
C – All components 303 stainless steel.
Catalog Number 5162E
PERMANENT FITTINGS - 91N SERIES
16791N Male Inverted Swivel 45° Elbow
91N Series Permanent
A
B
E
J
*Part
Number
C
Thread
Size
Inch
16791N-4-4
+
7/16-24
16791N-5-5
+
16791N-6-6
+
16791N-8-8
+
16791N-10-10
+
16791N-12-12
+
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
-4
1/4
2.05
52
1-1/2
38
0.63
16
7/16
1/2-20
-5
5/16
2.48
63
1-7/8
48
0.71
18
1/2
5/8-18
-6
3/8
2.60
66
1-15/16
49
0.96
24
5/8
3/4-18
-8
1/2
2.85
72
2-1/8
54
0.90
23
3/4
7/8-18
-10
5/8
3.30
84
2-5/8
67
1.02
43
7/8
1-1/16-16
-12
3/4
3.64
58
2-13/16
71
1.15
29 1-1/16
* Steel tube, nipple, nut and shell.
B – Brass nipple, brass shell.
C – All components 303 stainless steel.
16991N Male Inverted Swivel 90° Elbow
91N Series Permanent
B
A
E
J
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
*Part
Number
C
Thread
Size
Inch
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
16991N-4-4
+
7/16-24
-4
1/4
1.72
44
1-3/16
30
1.19
30
7/16
16991N-5-5
+
1/2-20
-5
5/16
1.98
50
1-3/8
35
1.65
42
1/2
16991N-5-6 (+)
+
1/2-20
-6
3/8
2.03
52
1-7/16
37
1.65
42
1/2
16991N-6-6
+
5/8-18
-6
3/8
2.08
53
1-7/16
37
1.70
43
5/8
16991N-8-8
+
3/4-18
-8
1/2
2.18
55
1-1/2
38
1.87
43
3/4
16991N-10-10
+
7/8-18
-10
5/8
3.02
58
2-5/16
59
2.18
55
7/8
16991N-12-12
+
1-1/16-16
-12
3/4
3.36
85
2-9/16
64
2.51
64 1-1/16
90/91N Fittings
* Steel tube, nipple, nut and shell.
C – All components 303 stainless steel.
17791N SAE 45° Swivel 45° Elbow
91N Series Permanent
A
*Part
Number
B
E
45°
J
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
C
Thread
Size
Inch
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
17791N-6-6
+
5/8-18
-6
3/8
2.06
52
1-5/16
33
0.39
10
3/4
17791N-12-12
+
1-1/16-14
-12
3/4
3.07
78
2-7/16
62
0.78
20
1-1/4
* Steel tube, nipple, nut and shell.
C – All components 303 stainless steel.
45
(+) Non-Standard. Contact Customer Service for availability.
PERMANENT FITTINGS - 91N SERIES
17991N SAE 45° Swivel 90° Elbow
91N Series Permanent
A
B
*Part
Number
C
Thread
Size
Inch
17991N-6-6
+
5/8-18
J
17991N-12-12
+
1-1/16-14
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
-6
3/8
2.06
52
1-5/16
49
1.19
30
3/4
-12
3/4
2.92
74
2-1/8
54
1.82
46
1-1/4
Inch
Tube
Size
E
45°
Tube
Size
* Steel tube, nipple, nut and shell.
C – All components 303 stainless steel.
1AL91N A-LOK® Compression
91N Series Permanent
Part
Number
A
B
(w/nut/ferrules)
H
J
Part
Number
C
(w/o nut/ferrules)
Cutoff
Allow. B
A
H
Hex
J
Hex
Inch
Inch
MM
Inch
MM
Inch
Inch
1AL91N-4-4 (+)
1AL91N-4-4N (+)
-4
1/4
1.30
33
7/16
11
1/2
9/16
1AL91N-4-5 (+)
1AL91N-4-5N (+)
-5
1/4
1.35
34
7/16
11
1/2
9/16
1AL91N-6-6 (+)
1AL91N-6-6N (+)
-6
3/8
1.53
39
1/2
13
5/8
11/16
1AL91N-8-8 (+)
1AL91N-8-8N (+)
-8
1/2
1.61
41
7/16
11
13/16
7/8
1AL91N-12-12 (+) 1AL91N-12-12N (+)
-12
3/4
1.86
47
1/2
13
1-1/8
1-1/8
1AL91N-16-16 (+) 1AL91N-16-16N (+)
-16
1
2.11
58
7/16
11
1-3/8
1-1/2
C – 316 stainless steel nipple, nut and ferrules; 303 stainless steel shell.
Note: Nut part no. is XNUX-316; front ferrule part no. is XFFX-316; back ferrule part no. is XBFX-316.
X Denotes dash size.
90/91N Fittings
Please reference Instrument Tubing Selection Guide, Bulletin 4200-TS, or contact the Instrumentation
Connectors Division in Huntsville, Alabama, (Phone: 256-881-2040) directly for correct installation and
application information.
1P691N CPI® Compression (With Nut and Ferrule)
91N Series Permanent
A
B
J
Part
Number
H
Inch
Tube
Size
Cutoff
Allow. B
A
H
Hex
J
Hex
Inch
Inch
MM
Inch
MM
Inch
Inch
1P691N-4-4C (+)
-4
1/4
1.30
33
7/16
11
1/2
9/16
1P691N-4-5C (+)
-5
1/4
1.35
34
7/16
11
1/2
9/16
1P691N-6-6C (+)
-6
3/8
1.53
39
1/2
13
5/8
11/16
1P691N-8-8C (+)
-8
1/2
1.61
41
7/16
11
13/16
7/8
1P691N-12-12C (+)
-12
3/4
1.86
47
1/2
13
1-1/8
1-1/8
1P691N-16-16C (+)
-16
1
2.06
58
7/16
14
1-3/8
1-1/2
C – 316 stainless steel nipple, nut and ferrule; 303 stainless steel shell.
Note: Nut part No. is XBZ-SS; ferrule part No. is XTZ-SS. X Denotes dash size.
Please reference Instrument Tubing Selection Guide, Bulletin 4200-TS, or contact the Instrumentation
Connectors Division in Huntsville, Alabama, (Phone: 256-881-2040) directly for correct installation and
application information.
(+) Non-Standard. Contact Customer Service for availability.
46
Catalog Number 5162E
PERMANENT FITTINGS - 91N SERIES
1J191N Female Seal-Lok™ Swivel 90° Elbow Long Drop
91N Series Permanent
*Part
Number
A
B
E
J
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
9/16-18
-4
1/4
1.66
42
1-1/16
27
1.80
46
11/16
45
1-1/16
27
1.80
46
11/16
Hose Fitting
1J191N-4-4 (+)
Tube
Size
Thread
Size
C
1J191N-4-5
+
9/16-18
-5
5/16
1.78
1J191N-6-5 (+)
+
11/16-16
-5
5/16
1.92
49
1-3/16
30
2.13
54
13/16
1J191N-6-6
+
11/16-16
-6
3/8
1.92
49
1-3/16
30
2.13
54
13/16
1J191N-8-6 (+)
+
13/16-16
-6
3/8
2.00
51
1-9/16
40
2.51
43
15/16
1J191N-8-8
+
13/16-16
-8
1/2
2.15
58
1-7/16
37
2.51
64
15/16
1J191N-10-10
+
1-14
-10
5/8
1.25
32
1-9/16
40
2.76
70
1-1/8
1J191N-12-12
+
1-3/16-12
-12
3/4
2.65
67
1-13/16
46
3.78
96
1-3/8
1J191N-16-16
+
1-7/16-12
-16
1
3.15
80
2-1/4
57
4.50
114
1-1/2
* Steel tube, nipple, nut, and shell.
C – All components 303 stainless steel.
1J791N Seal-Lok™ Swivel 45° Elbow
91N Series Permanent
E
J
*Part
Number
C
Hose Fitting
Thread
Size
Inch
9/16-18
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
-4
1/4
1.73
44
1-1/4
32
0.41
10
11/16
1J791N-4-4
+
1J791N-4-6
+
9/16-18
-6
3/8
1.91
49
1-5/16
33
0.41
10
11/16
1J791N-6-6
+
11/16-16
-6
3/8
2.02
51
1-3/8
35
0.43
11
13/16
1J791N-8-8
+
13/16-16
-8
1/2
2.18
55
1-1/2
38
0.59
15
15/16
1J791N-8-10
+
13/16-16
-8
1/2
2.39
61
1-11/16
43
0.59
15
15/16
1J791N-10-10
+
1-14
-10
5/8
2.47
63
1-3/4
44
0.59
43
1-1/8
1J791N-12-12
+
1-3/16-12
-12
3/4
2.74
58
1-15/16
49
0.81
21
1-3/8
1J791N-16-16
+
1-7/16-12
-16
1
3.50
89
2-1/2
64
0.94
24
1-5/8
* Steel tube, nipple, nut, and shell.
C – All components 303 stainless steel.
47
(+) Non-Standard. Contact Customer Service for availability.
90/91N Fittings
B
A
PERMANENT FITTINGS - 91N SERIES
1J991N Seal-Lok™ Swivel 90° Elbow
91N Series Permanent
*Part
Number
A
B
C
Hose Fitting
E
J
Thread
Size
Inch
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
MM
Inch
MM
Inch
MM
Inch
1J991N-4-4
+
9/16-18
-4
1/4
1.79
45
1-1/4
32
0.82
21
11/16
1J991N-6-6
+
11/16-16
-6
3/8
1.87
47
1-1/4
32
0.90
23
13/16
1J991N-8-8
+
13/16-16
-8
1/2
2.07
53
1-3/8
35
1.15
29
15/16
1J991N-10-10
+
1-14
-10
5/8
2.23
57
1-1/2
38
1.27
32
1-1/8
1J991N-12-12
+
1-3/16-12
-12
3/4
2.63
67
1-7/8
48
1.85
43
1-3/8
1J991N-16-16
+
1-7/16-12
-16
1
3.45
58
2-9/16
65
2.21
56
1-5/8
1J991N-20-20
+
1-11/16-12
-20
1-1/4
3.91
99
2-7/8
73
2.51
64
1-7/8
* Steel tube, nipple, nut, and shell.
C – All components 303 stainless steel.
PARKER PAGE International offers
Industrial, Sanitary and Field Attachable Fittings
1JC91N Seal-Lok™ Straight
91N Series Permanent
90/91N Fittings
B
J
*Part
Number
A
B
C
Thread Size
Hose Fitting
H
Cutoff
Allow. B
A
Inch
Inch
MM
Inch
MM
H
Hex
J
Hex
Inch
1JC91N-4-4
+
9/16-18
-4
1.46
37
5/8
16
9/16
11/16
1JC91N-6-6
+
11/16-16
-6
1.62
41
11/16
17
5/8
13/16
1JC91N-8-8
+
13/16-16
-8
1.93
49
13/16
21
3/4
15/16
1JC91N-10-10
+
1-14
-10
2.05
52
7/8
22
15/16
1-1/8
1JC91N-12-10
+
1-3/16-12
-10
2.05
52
1-1/4
32
15/16
1-3/8
1JC91N-12-12
+
1-3/16-12
-12
2.05
58
1-1/4
32
15/16
1-3/8
1JC91N-16-16
+
1-7/16-12
-16
2.56
65
1-1/16
27
1-3/8
1-5/8
1JC91N-20-16
+
+
1-11/16-12
-16
2.30
58
1-3/8
35
1-5/8
1-7/8
1JC91-20-20
+
+
1-11/16-12
-20
2.68
68
1-11/16
43
1-11/16
1-7/8
* Steel nipple, nut, and shell.
B – Brass nipple, brass nut, shell.
C – All components 303 stainless steel.
(+) Non-Standard. Contact Customer Service for availability.
48
Catalog Number 5162E
PERMANENT FITTINGS - 91N SERIES
1Q191N Ultra Seal
91N Series Permanent
Part
Number
A
B
Thread Size
Inch
Hose Fitting
J
Cutoff
Allow. B
A
Inch
J
Hex
Inch
MM
Inch
MM
Inch
3/4
19
11/16
1Q191N-4-4C (+)
9/16-18
-4
1/4
1.63
41
1Q191N-6-6 C (+)
3/4-20
-6
3/8
1.81
46
7/8
22
7/8
1Q191N-8-8C (+)
7/8-20
-8
1/2
1.62
41
15/16
24
1
1-15/16-20
-12
3/4
1.93
49
1-1/8
29
1-1/2
1Q191N-12-12C (+)
C – 316L stainless steel nipple and nut; 303 stainless steel shell.
1HV91N Male VacuSeal
91N Series Permanent
B
A
Part
Number
H
Hex
Inch
Inch
Inch
MM
Inch
MM
Inch
1HV91N-4-4C (+)
9/16-18
-4
1/4
1.59
40
1
25
3/4
1HV91N-6-6C (+)
7/8-14
-6
3/8
1.80
46
1
24
1-1/16
1HV91N-8-8C (+)
7/8-14
-8
1/2
1.89
48
1-1/16
27
1-1/16
Hose Fitting
H
Cutoff
Allow. B
A
Thread
Size
1VH91N Female VacuSeal
91N Series Permanent
B
A
Part
Number
Hose Fitting
J
Thread
Size
Inch
Cutoff
Allow. B
A
Inch
Inch
MM
Inch
MM
H
Hex
Inch
1VH91N-4-4C (+)
9/16-18
-4
1/4
1.59
40
1-1/16
27
3/4
1VH91N-8-6C (+)
7/8-14
-6
3/8
1.83
46
1-3/16
30
1-1/16
1VH91N-8-8C (+)
7/8-14
-8
1/2
1.94
49
1-3/16
30
1-1/16
C – 316L stainless steel nipple and nut; 303 stainless steel shell.
49
(+) Non-Standard. Contact Customer Service for availability.
90/91N Fittings
C – 316L stainless steel nipple and nut; 303 stainless steel shell.
PERMANENT FITTINGS - 91N SERIES
1TU91N Universal Tube Stub Fitting
91N Series Permanent
B
Part
Number
A
Inch
Cutoff
Allow. B
A
Inch
Hose Fitting
Inch
MM
Inch
MM
1TU91N-2-3C
-3
1/8
1.33
34
7/8
22
1TU91N-3-3C
-3
3/16
1.33
34
7/8
22
1TU91N-4-4C
-4
1/4
1.63
41
1-1/16
27
1TU91N-4-5C
-5
1/4
1.70
43
1-1/16
27
1TU91N-6-6C
-6
3/8
1.81
46
1-3/16
30
1TU91N-8-8C
-8
1/2
2.72
58
1-7/16
37
1TU91N-8-10C
-10
1/2
2.14
54
1-7/16
37
1TU91N-10-10C (+)
-10
5/8
2.14
54
1-7/16
37
1TU91N-12-12C (+)
-12
3/4
2.24
57
1-7/16
37
1TU91N-16-16C
-16
1
2.73
69
1-3/4
44
NOTE: C – 316 stainless steel nipple, 303 stainless steel shell.
19291N Female BSP Swivel
91N Series Permanent
A
B
*Part
Number
H
Cutoff
Allow. B
A
C
Thread
Size
Inch
Inch
Inch
MM
Inch
19291N-8-8
+
+
1/2-14
8
1/2
1.99
51
1-5/16
19291N-12-12
+
+
3/4-14
12
3/4
2.35
60
1-9/16
Hose Fitting
J
Tube
Size
B
H
Hex
J
Hex
MM
MM
MM
33
27
27
40
36
36
NOTE: * Steel nipple, nut and shell.
90/91N Fittings
B – Brass nipple, brass nut, shell.
C – All components 303 stainless steel.
1B291N Female BSP Swivel 90° Elbow
A
91N Series Permanent
*Part
Number
B
B
C
Hose Fitting
E
J
Thread
Size
Inch
Tube
Size
Cutoff
Allow. B
A
J
Hex
E
Inch
Inch
MM
Inch
MM
Inch
MM
MM
1B291N-8-8
+
+
1/2-14
8
1/2
2.04
52
1-3/8
35
1.57
40
27
1B291N-12-12
+
+
3/4-14
12
3/4
2.93
74
2-1/8
54
2.54
65
36
NOTE: * Steel nipple, tube, nut and shell.
B – Brass nipple, brass nut, shell.
C – All components 303 stainless steel.
(+) Non-Standard. Contact Customer Service for availability.
50
Catalog Number 5162E
FIELD ATTACHABLE FITTINGS - 90 SERIES
20190 - Male Pipe Rigid
90 Series Field Attachable
Hose
Number
Part
Number
Thread
Size
Deduct
Length
-04*
20190-2-4
1/8”-27
29/32”
-04*
20190-4-4
1/4”-18
1-1/16”
-05*
20190-4-5
1/4”-18
1-1/8”
-06
20190-4-6
1/4”-18
1-1/8”
-06*
20190-6-6
3/8”-18
1-1/8”
-08
20190-6-8
3/8”-18
1-5/32”
-08*
20190-8-8
1/2”-14
1-15/32”
-10
20190-8-10
1/2”-14
1-7/16”
-12*
20190-12-12
3/4”-14
1-19/32”
-16
20190-12-16
3/4”-14
1-21/32”
-16
20190-16-16
1”-11 1/2
1-27/32”
-20
20190-20-20
1-1/4”-11 1/2
2-3/16”
NOTE: Brass nipple & ferrule and steel nut and socket.
*Denotes availability in stainless steel. Add suffix “S” for 303 SS nipple,
ferrule and socket. Consult factory for availability
20690 - 37° Female Swivel
90 Series Field Attachable
B
J
Hose
Number
A
H
Part
Number
Thread
Size
Deduct
Length
-04*
20690-4-4
7/16”-20
1-1/8”
-05*
20690-5-5
1/2”-20
1-3/32”
-06*
20690-6-6
9/16”-18
1-1/4”
-06
20690-8-6
3/4”-16
1-11/32”
-08*
20690-8-8
3/4”-16
1-3/8”
-10*
20690-8-10
3/4”-16
1-7/16”
-10*
20690-10-10
7/8”-14
1-9/16”
-12*
20690-12-12
1-1/16”-12
1-11/16”
-16*
20690-16-16
1-5/16”-12
1-15/16”
-20
20690-20-20
1-5/8”-12
2-5/16”
NOTE: Brass nipple & ferrule and steel nut and socket.
*Denotes availability in stainless steel. Add suffix “S” for 303 SS nipple,
ferrule and socket. Consult factory for availability
51
(+) Non-Standard. Contact Customer Service for availability.
90/91N Fittings
45°
37°
FIELD ATTACHABLE FITTINGS - 90 SERIES
20890 - 45° SAE Female Swivel
B
90 Series Field Attachable
A
45°
J
H
Hose
Number
Part
Number
Thread
Size
Deduct
Length
-06
20890-6-6
5/8”-18
1-5/16”
-12
20890-12-12
1-1/16”-14
1-11/16”
NOTE: Brass nipple, ferrule, steel nut & socket.
22890 - Male Inverted Flare Swivel
90 Series Field Attachable
B
A
J
H
Hose
Number
Part
Number
Thread
Size
Deduct
Length
-04
22890-4-4
7/16”-24
1-5/8”
-05
22890-5-5
1/2”-20
1-11/16”
-06
22890-5-6
1/2”-20
1-11/16”
-06
22890-6-6
5/8”-18
1-3/4”
-08
22890-8-8
3/4”-18
1-3/4”
-10
22890-10-10
7/8”-18
2-1/8”
-12
22890-12-12
1-1/16”-16
2-3/8”
90/91N Fittings
NOTE: Brass ferrule, steel tube, nut & socket.
23490 - Straight Tube
90 Series Field Attachable
B
Hose
Number
A
H
Part
Number
Thread
Size
Deduct
Length
-08
23490-8-8
1/2”
2-7/16”
-10
23490-8-10
1/2”
2-1/2”
-08
23490-10-8
5/8”
2-11/16”
-10
23490-10-10
5/8”
2-5/8”
-12
23490-12-12
3/4”
3-1/16”
NOTE: Brass nipple and ferrule, steel socket.
(+) Non-Standard. Contact Customer Service for availability.
52
Catalog Number 5162E
FIELD ATTACHABLE FITTINGS - 90 SERIES
23790 - 37° JIC Female Swivel - 45° Elbow
90 Series Field Attachable
A
B
E
37°
H
J
Hose
Number
Part
Number
Thread
Size
Deduct
Length
-04
23790-4-4
7/16”-20
1-3/8”
-05
23790-5-5
1/2”-20
1-1/8”
-06
23790-6-6
9/16”-18
1-3/16”
-06
23790-8-6
3/4”-16
1-19/32”
-08
23790-8-8
3/4”-16
1-5/8”
-10
23790-10-10
7/8”-14
1-25/32”
-12
23790-12-12
1-1/16” -12
2-7/32”
-16
23790-16-16
1-5/16”-12
2-1/2”
NOTE: Brass ferrule, steel tube, nut & socket.
23990 - 37° JIC Female Swivel - 90° Elbow
B
90 Series Field Attachable
A
E
H
J
37°
Hose
Number
Part
Number
Thread
Size
Deduct
Length
-04
23990-4-4
7/16”-20
1-1/4”
-05
23990-5-5
1/2”-20
1-1/4”
-06
23990-6-6
9/16”-18
1-3/32”
-06
23990-8-6
3/4”-16
1-1/4”
-08
23990-8-8
3/4”-16
1-1/2”
-10
23990-10-10
7/8”-14
1-1/2”
-12
23990-12-12
1-1/16”-12
2-5/16”
-16
23990-16-16
1-5/16”-12
2-1/2”
90/91N Fittings
NOTE: Brass ferrule, steel tube, nut & socket.
26190 - SAE Compression Air Brake
20°
B
90 Series Field Attachable
A
Hose
Number
H
Part
Number
Thread
Size
Deduct
Length
-08
26190-8-8
11/16”-20
1-1/16”
-10
26190-8-10
11/16”-20
1-5/32”
-10
26190-10-10
13/16”-18
1-15/16”
-10
26190-12-10
1”-18
1-5/16”
-12
26190-12-12
1”-18
1-13/16”
NOTE: Brass nipple & ferrule, carbon steel socket.
Use with 61HAB nut and 60HAB sleeve, nut included.
53
(+) Non-Standard. Contact Customer Service for availability.
FIELD ATTACHABLE FITTINGS - 90 SERIES
26790 - SAE Male Inverted Flare Swivel - 45° Elbow
90 Series Field Attachable
A
B
E
H
J
Hose
Number
Part
Number
Thread
Size
Deduct
Length
-04
26790-4-4
7/16”-24
1-11/16”
-05
N/A
7/16”-24
1-11/16”
-05
26790-5-5
1/2”-20
2”
-06
26790-5-6
1/2”-20
2-1/16”
-06
26790-6-6
5/8”-18
2-1/8”
-08
26790-8-8
3/4”-18
2-1/16”
-12
26790-12-12
1-1/16”-16
2-15/32”
NOTE: Brass ferrule, steel tube, nut & socket.
26990 - SAE Male Inverted Flare Swivel - 90° Elbow
90 Series Field Attachable
A
B
H
E
J
Hose
Number
Part
Number
Thread
Size
Deduct
Length
-04
26990-4-4
7/16”-24
1-9/16”
-05
26990-4-5
7/16”-24
1-5/8”
-05
26990-5-5
1/2”-20
1-1/2”
-06
26990-5-6
1/2”-20
1-9/16”
-06
26990-6-6
5/8”-18
1-1/2”
-08
26990-8-8
3/4”-18
1-11/16”
-12
26990-12-12 *NS
1-1/16”-16
2-3/16”
90/91N Fittings
NOTE: Brass ferrule, steel tube, nut & socket. * = Non Standard
27790 - 45° SAE Female Swivel - 45° Elbow
90 Series Field Attachable
A
B
E
45°
J
H
Hose
Number
-06
-12
Part
Number
27790-6-6
27790-12-12
Thread
Size
5/8” -18
1-1/16” -14
NOTE: Brass ferrule, steel tube, nut & socket.
(+) Non-Standard. Contact Customer Service for availability.
54
Deduct
Length
1-3/16”
2-7/32”
Catalog Number 5162E
FIELD ATTACHABLE FITTINGS - 90 SERIES
27990 - 45° SAE Female Swivel - 90° Elbow
90 Series Field Attachable
A
Hose
Number
B
E
H
Part
Number
Thread
Size
Deduct
Length
-06
27990-6-6
5/8”-18
1-3/16”
-12
27990-12-12
1-1/16”-14
2-3/16”
J
NOTE: Brass ferrule, steel tube, nut & socket.
45°
60HAB
61HAB
SAE Compression Airbrake Ferrule
SAE Compression Airbrake Nut
Hose
Number
Part
Number
Tube
Size
Hose
Number
Part
Number
Thread
Size
Tube
Size
-08
60HAB-08
1/2”
-08
61HAB-08
1-1/16”- 20
1/2”
-10
60HAB-10
5/8”
-10
61HAB-10
1-3/16”- 18
5/8”
-12
60HAB-12
3/4”
-12
61HAB-12
1”- 18
3/4”
NOTE: Use with Compression Airbrake Fittings.
NOTE: Use with Compression Airbrake Fittings.
L
L
W
90 Series Field Attachable
90 Series Field Attachable
H
Hose
Number
Part
Number
Hose
Number
Part
Number
-04*
20090-4
-04*
090-4B
-05*
20090-5
-05*
090-5B
-06*
20090-6
-06*
090-6B
-08*
20090-8
-08*
090-8B
-10*
20090-10
-10*
090-10B
-12*
20090-12
-12*
090-12B
-16*
20090-16
-16*
090-16B
NOTE: * Denotes availability in stainless steel.
Add-S suffix for 303 SS Socket
NOTE: * Denotes availability in stainless steel.
Add-S suffix for 303 SS Socket
55
(+) Non-Standard. Contact Customer Service for availability.
90/91N Fittings
090 - Replacement Ferrule
20090 - Replacement Socket
ACCESSORIES
Harsh environments sometimes require assemblies with silicone fire sleeves, fluoropolymer
heat shrink, polyolefin shrinkable chafe guard, spring guards or interlocked casings to
prolong the life of the hose. PARKER PAGE manufactures every hose style with these options
available.
Maximizing hose performance by adding cost reducing accessories such as Armor Guard,
to increase the abrasion resistance of the hose, or a Fire Sleeve, to maintain an outer hose
temperature for operator handling, can add weeks, months, and in some cases, even years to
hose life. Cost for hose enhancing accessories is minimal compared to the savings you gain
by keeping the hose operating longer in the field. Most of these product enhancements are
available for hoses sized from ¼” up to 4” and can be provided on almost any hose. In addition,
several of the value added accessories may be purchased separately, allowing customers to
value-up their existing hoses.
Available products include:
Silicone Covers, Stainless Steel
Spring Guard, Armor Guard,
Polyolefin Heat Shrink, and Fire
Sleeve.
For use on all PAGE Hoses.
Accessories
SFS Series Silicone Fire Sleeve
Hose
Number
Fire Sleeve
Number
-03
-04
-05
-06
-08
-10
-12
-16
-16Z
-20Z
SFS-08
SFS-08
SFS-08
SFS-12
SFS-12
SFS-12
SFS-16
SFS-20
SFS-20
SFS-24
PARKER PAGE Fire Sleeve has a
coating of specially compounded
silicone rubber bonded to a low
density high bulk fiberglass sleeve.
This unique combination offers
a temporary barrier to flame
penetration and provides long term
mechanical and environmental
protection. Applications include steel
manufacturing plants, foundries,
glass factories and welding/cutting
shops.
TESTED in accordance with:
UL-73, NFPA-250, ASTM-E84
OPERATING TEMPERATURES:
Continuous: -65˚F to +500°F (-18˚C to +260˚C)
Intermittent: -65˚F to +2000°F (-18˚C to +1093˚C)
56
Catalog Number 5162E
ACCESSORIES
SG Series Spring Guard
Dash
Number
-04
-05
-06
-08
-10
Part
Number
SG-04
SG-05
SG-06
SG-08
SG-10
Hose
Number
-12
-16
-16Z
-20Z
-
Spring Guard
Number
SG-12
SG-16
SG-16Z
SG-20Z
-
B2 Polyolefin Heat Shrink
Hose
Number
Polyolefin HS
-03
-04
-05
-06
-08
-10
-12
-16
-16Z
-20Z
B2-08-XXX
B2-08-XXX
B2-08-XXX
B2-12-XXX
B2-12-XXX
B2-12-XXX
B2-16-XXX
B2-24-XXX
B2-24-XXX
B2-24-XXX
PARKER PAGE Spring Guard is available in hot dipped
galvanized carbon steel. This method of protection is
well suited for applications where hose assemblies
are subjected to rough handling, abrasion and severe
flexing. A stainless steel internal support spring is also
available for vacuum applications.
PARKER PAGE offers a very flexible, flame retarded,
radiation crosslinked Polyolefin heat shrink to aid in the
identification of hoses through color coding and also,
protect surfaces from dirt and grim. Meets functional
requirements of AMS-DTL-23053/5, Class 1E2.
COLORS AVAILABLE
RED= Red
BLK= Black
WHI=White
BLU=Blue
YEL=Yellow
GRY=Gray
Custom Printing Available
Fluoropolymer Heat Shrink Available
NOTE: Replace XXX with 3 letter indicator
for color. See color chart.
ExamplE: B2-08-BLU = 1/2” Blue
Accessories
OPERATING TEMPERATURES: Continuous: -65˚F to +275°F (-18˚C to +135˚C)
SAG Armour Guard
Non Standard Product
Please contact Customer Service for sizing, delivery and pricing.
817.624.1329 • 800.847.7280 • email: [email protected]
All ratings based on 72°F (22°C) - All dimensions nominal - Working pressures and vacuum ratings may vary depending
upon end connections and process and temperature parameters.
57
PARKER PAGE HOSE & FITTINGS
SELECTION CHART
Hose
Series
Description
Crimp
Fitting
Crimp
Collar
S30/S30B
Smoothbore Nominal (0.030wall)
91N series
(Cat. pages 39-50)
S40/S40B
Smoothbore Nominal (0.040wall)
STW/STB
Crimpers
Factory
Assembly
Field
Attachable
Fitting
ParKrimp
Adjustable
-
Yes
COS-K4 with
special dies required
No
90 series (Cat.
pages 51-55
91N series
(Cat. pages 39-50)
-
Yes
COS-K4 with
special dies required
No
Not applicable
Smoothbore True Bore
Two piece crimp fittings
(Cat. pages 23-35)
ST300
No
Yes
No
Not applicable
SCW/SCB
Convoluted
Two piece crimp fittings
(Cat. pages 23-35)
SC300
No
Yes
No
Not applicable
PCW/PCB
Convoluted
Two piece crimp fittings
(Cat. pages 23-35)
PC300
No
Yes
No
Not applicable
SBP/SWPV
Platinum Cured
Silicone
Two piece crimp fittings
(Cat. pages 23-35)
SIL300
No
Yes
No
Not applicable
RCTW/RCTB
Rubber Covered
Fluoropolymer
Two piece crimp fittings
(Cat. pages 23-35)
RC300
No
Yes
No
Not applicable
SCWV/SCBV
Convoluted - Heavy
Wall
Two piece crimp fittings
(Cat. pages 23-35)
SC300
No
Yes
Yes
Not applicable
PCWV/PCBV
Convoluted - Heavy
Wall
Two piece crimp fittings
(Cat. pages 23-35)
PC300
No
Yes
Yes
Not applicable
Inserts & Collars Sold Separately
Examples:
If you need a Female JIC Swivel Fitting for a 08-SCW Hose (1/2” Convoluted), place
zan order for (1) 08-08 FJX-S and (1) 08-SC300.
Technical
If you need a Male Pipe Fitting for a 12-RCTW Hose, place an order for (1) 12-12
zMP-S and (1) 12-RC300.
58
Catalog Number 5162E
Technical
MEASURING ASSEMBLY LENGTH
59
Technical
PARKER PAGE BRAIDING CHARACTERISTICS
PEEK™ is a registered trademark of Victrex. Monel™ is a registered trademark of Atofina. Kynar® is a registered
trademark of Elf Autochem, NA Hastelloy® is a registered trademark of Haynes International. Nomex® and
Kevlar® are registered trademarks of Dupont.
60
Catalog Number 5162E
SUMMARY OF PROPERTIES
<500,000
<25,000
Technical
<80,000
61
HOSE DIAMETER/FLOW RATE/VELOCITY GUIDE
Selection of Hose Diameter from Flow Rate and Velocity
The Fluid Velocity Nomogram gives the velocity of a liquid or gas as a function of flow rate and inside diameter
of the fluid line. The commonly recommended maximum velocities for hydraulic oil systems at 200°F or less
are indicated for guidance.
Example: At 10 gpm, what is the minimum size within the recommended velocity range for a hydraulic pressure line?
The dashed line drawn from the 10 gpm mark on the left hand line to the maximum velocity of 20 fps
intersects the mid­dle line at .438 " (7/16" I. D. hose or tubing).
For a hose application, use 1/2" I. D., the nearest common standard size.
This chart is based on the following formulas: vfps = .321Q
þd2 , Q = gal per min
d = hose or tube I. D. (inch)
4
cu. ft./min. = .1337 Q
WARNING
Technical
Keep fingers and hands away
from die-pusher area. Failure
to do so may result in personal
injury.
62
The cu. ft. per min. value is the actual
volume flow rate under flowing
conditions.
For air, standard cfm of free air = 7.81
actual cfm when the inlet air is at 100
PSIg, 68°F.
Catalog Number 5162E
HOSE ASSEMBLY & CRIMPING
Permanent Fittings
1 Cut
Using a power hose cutoff saw, cut hose squarely.
NOTE
PTFE Hose should be taped prior to cutting. Hose
should be cut at center point of taped section.
2 Inspection
Hose – Visually inspect both ends of hose for square cut. Remove any burrs, loose fibers or wires.
Fittings – Verify fitting series corresponds to the
selected hose. Visually inspect fitting(s) for a
through-hole, threads and damage.
3 Prep Assembly
Insertion Depth – Mark hose end with proper insertion depth line. For jacketed PTFE hoses, use a sharp
knife and light pressure to cut back the cover at least the length of the insertion depth of the fitting.
WARNING
Assemble Hose – Push fitting onto hose slightly and then remove tape. Continue pushing fitting onto hose
until fitting reaches depth insertion mark.
63
Technical
Do not use lubricating oil when installing
fittings on hose used in oxygen service.
When installing fittings on hose used in
oxygen service, lubricate with a non-oil
based soap solution. Failure to do so may
result in an explosion and personal injury
HOSE ASSEMBLY & CRIMPING
Permanent Fittings
4 Die Selection
5 Lubricate Bowl
Select proper Parkrimp die set.
(Reference Crimpsource online at www.
parker.com/crimpsource)
Using a premium, quality, lithium-base
grease, apply a thin layer of grease on
bowl of crimper base plate.
6 Die & Spacer Ring
Crimp Die – Place die set into bowl.
Die Ring – Place applicable die ring on top of die.
Position ring so it is centered on die.
Parflex hoses utilize silver die ring.
(Reference Crimpsource online at www.parker.com
/crimpsource)
7 Crimp
Assemble hose – Insert hose and fitting from bottom of crimper and up through die set. Position fitting so
bottom of fitting skirt rests on die step (PARKALIGN feature).
WARNING
Keep fingers and hands away from die-pusher area.
Failure to do so may result in personal injury.
Technical
NOTE
Pump on crimper should not exceed 3000 PSI. Parker
Hannifin will not accept responsibility for the operation
of or provide warranty coverage for a crimper that
is operated by a power unit other than equipment
supplied by Parker Hannifin for the express purpose of
operating the crimper.
While holding hose and fitting in position on die step, crimp fitting onto hose until die ring contacts base plate.
64
Catalog Number 5162E
HOSE ASSEMBLY & CRIMPING
Permanent Fittings
8 Measure & Inspect
Crimp Die – Place die set into bowl.
Inspect insertion depth
mark at fitting ends.
Insertion mark must be
visible and within 1/8” of
bottom of fitting shell.
Measure crimp diameter
of each fitting at top,
middle and bottom of
shell. Take measurements
at a minimum of three
places around shell
circumference. Verify
crimp diameter is within
tolerances. (Reference
Technical
Measure and verify hose
assembly length.
65
HOSE ASSEMBLY & CRIMPING
Field Attachable Fittings
1 Inspection
Hose – Visually inspect both ends of hose for square cut. Remove any burrs, loose fibers or wires.
FITTINGS –Inspect each component for possible
damage. In addition, inspect socket and nipple
for a through-hole and threads.
2 Assembly
Slide two sockets over end of hose with bottom of sockets back to back. Position sockets at each end of hose.
NOTE
When installing sockets on hose, check hose
ends to determine if wire braid “necks down”
(bends inward). If one end “necks down” use this
end to slide sockets onto hose.
3 Assembly
Mount nipple hex in vise. Ensure nipple end extends beyond vise jaws sufficiently to allow installation of hose.
Technical
Push hose bore onto nipple to size tube and to aid
in separating braid before assembling ferrule onto
hose.
Once completed, remove hose from nipple.
66
Catalog Number 5162E
HOSE ASSEMBLY & CRIMPING
Field Attachable Fittings
4 Assembly
By hand, push sleeve over end of PTFE core tube and under wire braid.
To complete positioning of sleeve, push hose end
with sleeve, against a solid flat surface.
5 Assembly
Verify tube butts against inside shoulder of ferrule.
Using a tapered punch, push punch into end of
sleeve and tube to set sleeve barbs into tube.
6 Assembly
Using SAE 20 weight oil, lubricate nipple and socket threads. For stainless steel fittings, use Parker
ThreadMate™ or a molybdenum type lubricant.
Assemble hose – Using a twisting motion, push hose over nipple until hose is seated against nipple chamfer.
67
Technical
WARNING
Do not use lubricating oil when installing fittings
on hose used in oxygen service. When installing
fittings on hose used in oxygen service lubricate
with a non-oil based soap solution. Failure to do
so may result in an explosion and personal injury
when hose is used.
HOSE ASSEMBLY & CRIMPING
Field Attachable Fittings
7 Assembly
Push socket forward and hand-start threading of socket to nipple.
CAUTION
When tightening socket in vise, do not over
tighten vise jaws. Over tightening vise jaws will
distort internal threads of socket.
Remove assembly from vise and reposition with socket in vise jaws. Ensure socket extends beyond vise jaws far
enough to allow nipple to be completely tightened.
8 Assembly
Wrench tighten nipple hex until clearance between hex and socket hex is 1/32” or less.
Tighten further to align corners of nipple and
socket hexes if necessary.
9 Measure & Inspect
Technical
Measure and verify hose assembly length.
68
Catalog Number 5162E
! Parker Safety Guide for Selecting and Using Hose, Tubing, Fittings and Related Accessories
Publication No. 4400-B.1
Revised: August 2007
WARNING: Failure or improper selection or improper use of hose, tubing, assemblies, fittings, quick action couplings or related accessories ("Products") can cause
death, personal injury and property damage. Possible consequences of failure or improper selection or improper use of these Products include but are not limited to:
•
•
•
•
•
•
Fittings thrown off at high speed.
High velocity fluid discharge.
Explosion or burning of the conveyed fluid.
Electrocution from high voltage electric power lines.
Contact with suddenly moving or falling objects that are controlled by the
conveyed fluid.
Injections by high-pressure fluid discharge.
•
•
•
•
•
Dangerously whipping hose.
Contact with conveyed fluids that may be hot, cold,toxic, or otherwise
injurious.
Sparking or explosion caused by static electricity buildup or other sources of
electricity.
Sparking or explosion while spraying paint or flammable liquids.
Injuries resulting from inhalation, ingestion or exposure to fluids.
Before selecting or using any of these Products, it is important that you read and follow the instructions below. Only Hose from Parker’s Stratoflex Products Division is
approved for in-flight aerospace applications.
1.0 GENERAL INSTRUCTIONS
1.1 Scope: This safety guide provides instructions for selecting and using (including assembling, installing, and maintaining) these Products. For convenience, all rubber and/
or thermoplastic products commonly called “hose” or “tubing” are called “Hose” in this safety guide. All assemblies made with Hose are called “Hose Assemblies”. All products
commonly called “fittings”, “couplings” or “adapters” are called “Fittings”. All related accessories (including crimping and swaging machines and tooling) are called “Related
Accessories”. This safety guide is a supplement to and is to be used with, the specific Parker publications for the specific Hose, Fittings and Related Accessories that are being
considered for use. Parker publications are available at www.parker.com. SAE J1273 (www.sae.org) and ISO 17165-2 (www.ansi.org) also provide recommended practices for
hydraulic Hose Assemblies.
1.2 Fail-Safe: Hose, Hose Assemblies and Fittings can and do fail without warning for many reasons. Design all systems and equipment in a fail-safe mode, so that failure of
the Hose, or Hose Assembly or Fitting will not endanger persons or property.
1.3 Distribution: Provide a copy of this safety guide to each person responsible for selecting or using Hose and Fitting products. Do not select or use Parker Hose or Fittings
without thoroughly reading and understanding this safety guide as well as the specific Parker publications for the Products.
1.4 User Responsibility: Due to the wide variety of operating conditions and applications for Hose and Fittings, Parker does not represent or warrant that any particular Hose or
Fitting is suitable for any specific end use system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through its
own analysis and testing, is solely responsible for:
• Making the final selection of the Products.
• Assuring that the user’s requirements are met and that the application presents no health or safety hazards.
• Providing all appropriate health and safety warnings on the equipment on which the Products are used.
• Assuring compliance with all applicable government and industry standards.
1.5 Additional Questions: Call the appropriate Parker technical service department if you have any questions or require any additional information. See the Parker publication for
the Products being considered or used, or call 1-800-CPARKER, or go to www.parker.com, for telephone numbers of the appropriate technical service department.
2.1 Electrical Conductivity: Certain applications require that the Hose be nonconductive to prevent electrical current flow. Other applications require the Hose and the Fittings
and the Hose/Fitting interface to be sufficiently conductive to drain off static electricity. Extreme care must be exercised when selecting Hose and Fittings for these or any other
applications in which electrical conductivity or nonconductivity is a factor.
The electrical conductivity or nonconductivity of Hose and Fittings is dependent upon many factors and may be susceptible to change. These factors include but are not limited
to the various materials used to make the Hose and the Fittings, Fitting finish (some Fitting finishes are electrically conductive while others are nonconductive), manufacturing
methods (including moisture control), how the Fittings contact the Hose, age and amount of deterioration or damage or other changes, moisture content of the Hose at any
particular time, and other factors. The following are considerations for electrically nonconductive and conductive Hose. For other applications consult the individual catalog pages
and the appropriate industry or regulatory standards for proper selection.
2.1.1 Electrically Nonconductive Hose: Certain applications require that the Hose be nonconductive to prevent electrical current flow or to maintain electrical isolation. For
applications that require Hose to be electrically nonconductive, including but not limited to applications near high voltage electric lines, only special nonconductive Hose can be
used. The manufacturer of the equipment in which the nonconductive Hose is to be used must be consulted to be certain that the Hose and Fittings that are selected are proper for
the application. Do not use any Parker Hose or Fittings for any such application requiring nonconductive Hose, including but not limited to applications near high voltage electric
lines, unless (i) the application is expressly approved in the Parker technical publication for the product, (ii) the Hose is marked “nonconductive”, and (iii) the manufacturer of the
equipment on which the Hose is to be used specifically approves the particular Parker Hose and Fittings for such use.
2.1.2 Electrically Conductive Hose: Parker manufactures special Hose for certain applications that require electrically conductive Hose.
Parker manufactures special Hose for conveying paint in airless paint spraying applications. This Hose is labeled “Electrically Conductive Airless Paint Spray Hose” on its layline
and packaging. This Hose must be properly connected to the appropriate Parker Fittings and properly grounded in order to dissipate dangerous static charge buildup, which occurs
in all airless paint spraying applications. Do not use any other Hose for airless paint spraying, even if electrically conductive. Use of any other Hose or failure to properly connect
the Hose can cause a fire or an explosion resulting in death, personal injury, and property damage.
Parker manufactures a special Hose for certain compressed natural gas (“CNG”) applications where static electricity buildup may occur. Parker CNG Hose assemblies comply
with the requirements of ANSI/IAS NGV 4.2-1999; CSA 12.52-M99, “Hoses for Natural Gas Vehicles and Dispensing Systems” (www.ansi.org). This Hose is labeled
“Electrically Conductive for CNG Use” on its layline and packaging. This Hose must be properly connected to the appropriate Parker Fittings and properly grounded in order
to dissipate dangerous static charge buildup, which occurs in, for example, high velocity CNG dispensing or transfer. Do not use any other Hose for CNG applications where
static charge buildup may occur, even if electrically conductive. Use of other Hoses in CNG applications or failure to properly connect or ground this Hose can cause a fire
or an explosion resulting in death, personal injury, and property damage. Care must also be taken to protect against CNG permeation through the Hose wall. See section 2.6,
Permeation, for more information. Parker CNG Hose is intended for dispenser and vehicle use at a maximum temperature of 180°F (82°C). Parker CNG Hose should not be used
in confined spaces or unventilated areas or areas exceeding 180°F (82°C). Final assemblies must be tested for leaks. CNG Hose Assemblies should be tested on a monthly basis
for conductivity per ANSI/IAS NGV 4.2-1999; CSA 12.52-M99.
Parker manufactures special Hose for aerospace in-flight applications. Aerospace in-flight applications employing Hose to transmit fuel, lubricating fluids and hydraulic fluids
require a special Hose with a conductive inner tube. This Hose for in-flight applications is available only from Parker’s Stratoflex Products Division. Do not use any other Parker
Hose for in-flight applications, even if electrically conductive. Use of other Hoses for in-flight applications or failure to properly connect or ground this Hose can cause a fire or an
explosion resulting in death, personal injury and property damage. These Hose assemblies for in-flight applications must meet all applicable aerospace industry, aircraft engine and
aircraft requirements.
2.2 Pressure: Hose selection must be made so that the published maximum working pressure of the Hose and Fittings are equal to or greater than the maximum system pressure.
The maximum working pressure of a Hose Assembly is the lower of the respective published maximum working pressures of the Hose and the Fittings used. Surge pressures or
peak transient pressures in the system must be below the published maximum working pressure for the Hose. Surge pressures and peak pressures can usually only be determined
by sensitive electrical instrumentation that measures and indicates pressures at millisecond intervals. Mechanical pressure gauges indicate only average pressures and cannot
be used to determine surge pressures or peak transient pressures. Published burst pressure ratings for Hose is for manufacturing test purposes only and is no indication that the
Product can be used in applications at the burst pressure or otherwise above the published maximum recommended working pressure.
2.3 Suction: Hoses used for suction applications must be selected to insure that the Hose will withstand the vacuum and pressure of the system. Improperly selected Hose may
collapse in suction application.
2.4 TemperaturE: Be certain that fluid and ambient temperatures, both steady and transient, do not exceed the limitations of the Hose. Temperatures below and above the
69
Warranty
2.0 HOSE AND FITTINGS SELECTION INSTRUCTIONS
recommended limit can degrade Hose to a point where a failure may occur and release fluid. Properly insulate and protect the Hose Assembly when routing near hot objects (e.g.
manifolds). Do not use any Hose in any application where failure of the Hose could result in the conveyed fluids (or vapors or mist from the conveyed fluids) contacting any open
flame, molten metal, or other potential fire ignition source that could cause burning or explosion of the conveyed fluids or vapors.
2.5 Fluid Compatibility: Hose Assembly selection must assure compatibility of the Hose tube, cover, reinforcement, and Fittings with the fluid media used. See the fluid
compatibility chart in the Parker publication for the product being considered or used. This information is offered only as a guide. Actual service life can only be determined by
the end user by testing under all extreme conditions and other analysis.
Hose that is chemically compatible with a particular fluid must be assembled using Fittings and adapters containing likewise compatible seals.
2.6 Permeation: Permeation (that is, seepage through the Hose) will occur from inside the Hose to outside when Hose is used with gases, liquid and gas fuels, and refrigerants
(including but not limited to such materials as helium, diesel fuel, gasoline, natural gas, or LPG). This permeation may result in high concentrations of vapors which are
potentially flammable, explosive, or toxic, and in loss of fluid. Dangerous explosions, fires, and other hazards can result when using the wrong Hose for such applications. The
system designer must take into account the fact that this permeation will take place and must not use Hose if this permeation could be hazardous. The system designer must take
into account all legal, government, insurance, or any other special regulations which govern the use of fuels and refrigerants. Never use a Hose even though the fluid compatibility
is acceptable without considering the potential hazardous effects that can result from permeation through the Hose Assembly.
Permeation of moisture from outside the Hose to inside the Hose will also occur in Hose assemblies, regardless of internal pressure. If this moisture permeation would have
detrimental effects (particularly, but not limited to refrigeration and air conditioning systems), incorporation of sufficient drying capacity in the system or other appropriate system
safeguards should be selected and used.
2.7 Size: Transmission of power by means of pressurized fluid varies with pressure and rate of flow. The size of the components must be adequate to keep pressure losses to a
minimum and avoid damage due to heat generation or excessive fluid velocity.
2.8 Routing: Attention must be given to optimum routing to minimize inherent problems (kinking or flow restriction due to Hose collapse, twisting of the Hose, proximity to
hot objects or heat sources). For additional routing recommendations see SAE J1273 and ISO 17165-2. Hose Assemblies have a finite life and if possible, should be installed in
a manner that allows for ease of inspection and future replacement. Rubber Hose because of its relative short life, should not be used in residential and commercial buildings for
HVAC (heating, ventilating and air conditioning) applications.
2.9 Environment: Care must be taken to insure that the Hose and Fittings are either compatible with or protected from the environment (that is, surrounding conditions) to which
they are exposed. Environmental conditions including but not limited to ultraviolet radiation, sunlight, heat, ozone, moisture, water, salt water, chemicals and air pollutants can
cause degradation and premature failure.
2.10 Mechanical Loads: External forces can significantly reduce Hose life or cause failure. Mechanical loads which must be considered include excessive flexing, twist, kinking,
tensile or side loads, bend radius, and vibration. Use of swivel type Fittings or adapters may be required to insure no twist is put into the Hose. Unusual applications may require
special testing prior to Hose selection.
2.11 Physical Damage: Care must be taken to protect Hose from wear, snagging, kinking, bending smaller that minimum bend radius and cutting, any of which can cause
premature Hose failure. Any Hose that has been kinked or bent to a radius smaller than the minimum bend radius, and any Hose that has been cut or is cracked or is otherwise
damaged should be removed and discarded.
2.12 Proper End Fitting: See instructions 3.2 through 3.5. These recommendations may be substantiated by testing to industry standards such as SAE J517 for hydraulic
applications, or MIL-A-5070, AS1339, or AS3517 for Hoses from Parker’s Stratoflex Products Division for aerospace applications.
2.13 Length: When establishing a proper Hose length, motion absorption, Hose length changes due to pressure, and Hose and machine tolerances and movement must be
considered.
2.14 Specifications and Standards: When selecting Hose and Fittings, government, industry, and Parker specifications and recommendations must be reviewed and followed as
applicable.
2.15 Hose Cleanliness: Hose components may vary in cleanliness levels. Care must be taken to insure that the Hose Assembly selected has an adequate level of cleanliness for
the application.
2.16 Fire Resistant Fluids: Some fire resistant fluids that are to be conveyed by Hose require use of the same type of Hose as used with petroleum base fluids. Some such fluids
require a special Hose, while a few fluids will not work with any Hose at all. See instructions 2.5 and 1.5. The wrong Hose may fail after a very short service. In addition, all
liquids but pure water may burn fiercely under certain conditions, and even pure water leakage may be hazardous.
2.17 Radiant Heat: Hose can be heated to destruction without contact by such nearby items as hot manifolds or molten metal. The same heat source may then initiate a fire. This
can occur despite the presence of cool air around the Hose.
2.18 Welding or Brazing: When using a torch or arc welder in close proximity to hydraulic lines, the hydraulic lines should be removed or shielded with appropriate fire resistant
materials. Flame or weld spatter could burn through the Hose and possibly ignite escaping fluid resulting in a catastrophic failure. Heating of plated parts, including Hose Fittings
and adapters, above 450°F (232°C) such as during welding, brazing or soldering may emit deadly gases.
2.19 Atomic Radiation: Atomic radiation affects all materials used in Hose assemblies. Since the long-term effects may be unknown, do not expose Hose assemblies to atomic
radiation.
2.20 Aerospace Applications: The only Hose and Fittings that may be used for in-flight aerospace applications are those available from Parker’s Stratoflex Products Division. Do
not use any other Hose or Fittings for in-flight applications. Do not use any Hose or Fittings from Parker’s Stratoflex Products Division with any other Hose or Fittings, unless
expressly approved in writing by the engineering manager or chief engineer of Stratoflex Products Division and verified by the user’s own testing and inspection to aerospace
industry standards.
2.21 Unlocking Couplings: Ball locking Couplings or other Fittings with quick disconnect ability can unintentionally disconnect if they are dragged over obstructions, or if the
sleeve or other disconnect member is bumped or moved enough to cause disconnect. Threaded Fittings should be considered where there is a potential for accidental uncoupling.
Warranty
3.0 HOSE AND FITTINGS ASSEMBLY AND INSTALLATION INSTRUCTIONS
3.1 Component Inspection: Prior to assembly, a careful examination of the Hose and Fittings must be performed. All components must be checked for correct style, size,
catalog number, and length. The Hose must be examined for cleanliness, obstructions, blisters, cover looseness, kinks, cracks, cuts or any other visible defects. Inspect the Fitting
and sealing surfaces for burrs, nicks, corrosion or other imperfections. Do NOT use any component that displays any signs of nonconformance.
3.2 Hose and Fitting Assembly: Do not assemble a Parker Fitting on a Parker Hose that is not specifically listed by Parker for that Fitting, unless authorized in writing by
the engineering manager or chief engineer of the appropriate Parker division. Do not assemble a Parker Fitting on another manufacturer’s Hose or a Parker Hose on another
manufacturer’s Fitting unless (i) the engineering manager or chief engineer of the appropriate Parker division approves the Assembly in writing or that combination is expressly
approved in the appropriate Parker literature for the specific Parker product, and (ii) the user verifies the Assembly and the application through analysis and testing. For Parker
Hose that does not specify a Parker Fitting, the user is solely responsible for the selection of the proper Fitting and Hose Assembly procedures. See instruction 1.4.
To prevent the possibility of problems such as leakage at the Fitting or system contamination, it is important to completely remove all debris from the cutting operation before
installation of the Fittings. The Parker published instructions must be followed for assembling the Fittings on the Hose. These instructions are provided in the Parker Fitting
catalog for the specific Parker Fitting being used, or by calling 1-800-CPARKER, or at www.parker.com.
3.3 Related Accessories: Do not crimp or swage any Parker Hose or Fitting with anything but the listed swage or crimp machine and dies in accordance with Parker published
instructions. Do not crimp or swage another manufacturer’s Fitting with a Parker crimp or swage die unless authorized in writing by the engineering manager or chief engineer of
the appropriate Parker division.
3.4 Parts: Do not use any Parker Fitting part (including but not limited to socket, shell, nipple, or insert) except with the correct Parker mating parts, in accordance with Parker
published instructions, unless authorized in writing by the engineering manager or chief engineer of the appropriate Parker division.
3.5 Field Attachable/Permanent: Do not reuse any field attachable Hose Fitting that has blown or pulled off a Hose. Do not reuse a Parker permanent Hose Fitting (crimped or
swaged) or any part thereof. Complete Hose Assemblies may only be reused after proper inspection under section 4.0. Do not assemble Fittings to any previously used hydraulic
Hose that was in service, for use in a fluid power application.
3.6 Pre-Installation Inspection: Prior to installation, a careful examination of the Hose Assembly must be performed. Inspect the Hose Assembly for any damage or defects.
DO NOT use any Hose Assembly that displays any signs of nonconformance.
3.7 Minimum Bend Radius: Installation of a Hose at less than the minimum listed bend radius may significantly reduce the Hose life. Particular attention must be given to
preclude sharp bending at the Hose to Fitting juncture. Any bending during installation at less than the minimum bend radius must be avoided. If any Hose is kinked during
installation, the Hose must be discarded.
3.8 Twist Angle and Orientation: Hose Assembly installation must be such that relative motion of machine components does not produce twisting.
3.9 Securement: In many applications, it may be necessary to restrain, protect, or guide the Hose to protect it from damage by unnecessary flexing, pressure surges, and contact
with other mechanical components. Care must be taken to insure such restraints do not introduce additional stress or wear points.
70
Catalog Number 5162E
3.10 Proper Connection of Ports: Proper physical installation of the Hose Assembly requires a correctly installed port connection insuring that no twist or torque is transferred to
the Hose when the Fittings are being tightened or otherwise during use.
3.11 External Damage: Proper installation is not complete without insuring that tensile loads, side loads, kinking, flattening, potential abrasion, thread damage or damage to
sealing surfaces are corrected or eliminated. See instruction 2.10.
3.12 System Checkout: All air entrapment must be eliminated and the system pressurized to the maximum system pressure (at or below the Hose maximum working pressure)
and checked for proper function and freedom from leaks. Personnel must stay out of potential hazardous areas while testing and using.
3.13 Routing: The Hose Assembly should be routed in such a manner so if a failure does occur, the escaping media will not cause personal injury or property damage. In
addition, if fluid media comes in contact with hot surfaces, open flame or sparks, a fire or explosion may occur. See section 2.4.
3.14 Ground Fault Equipment Protection Devices (GFEPDs): WARNING! Fire and Shock Hazard. To minimize the danger of fire if the heating cable of a Multitube bundle is
damaged or improperly installed, use a Ground Fault Equipment Protection Device. Electrical fault currents may be insufficient to trip a conventional circuit breaker.
For ground fault protection, the IEEE 515:1989 (www.ansi.org) standard for heating cables recommends the use of GFEPDs with a nominal 30 milliampere trip level for “piping
systems in classified areas, those areas requiring a high degree of maintenance, or which may be exposed to physical abuse or corrosive atmospheres”.
4.0 HOSE AND FITTING MAINTENANCE AND REPLACEMENT INSTRUCTIONS
4.1 Even with proper selection and installation, Hose life may be significantly reduced without a continuing maintenance program. The severity of the application, risk
potential from a possible Hose failure, and experience with any Hose failures in the application or in similar applications should determine the frequency of the inspection and the
replacement for the Products so that Products are replaced before any failure occurs. A maintenance program must be established and followed by the user and, at minimum, must
include instructions 4.2 through 4.7.
4.2 Visual Inspection Hose/Fitting: Any of the following conditions require immediate shut down and replacement of the Hose Assembly:
• Fitting slippage on Hose;
• Damaged, cracked, cut or abraded cover (any reinforcement exposed);
• Hard, stiff, heat cracked, or charred Hose;
• Cracked, damaged, or badly corroded Fittings;
• Leaks at Fitting or in Hose;
• Kinked, crushed, flattened or twisted Hose; and
• Blistered, soft, degraded, or loose cover.
4.3 Visual Inspection All Other: The following items must be tightened, repaired, corrected or replaced as required:
• Leaking port conditions;
• Excess dirt buildup;
• Worn clamps, guards or shields; and
• System fluid level, fluid type, and any air entrapment.
4.4
Functional Test: Operate the system at maximum operating pressure and check for possible malfunctions and leaks. Personnel must avoid potential hazardous areas while
testing and using the system. See section 2.2.
4.5 Replacement Intervals: Hose assemblies and elastomeric seals used on Hose Fittings and adapters will eventually age, harden, wear and deteriorate under thermal cycling
and compression set. Hose Assemblies and elastomeric seals should be inspected and replaced at specific replacement intervals, based on previous service life, government or
industry recommendations, or when failures could result in unacceptable downtime, damage, or injury risk. See section 1.2. Hose and Fittings may be subjected to internal
mechanical and/or chemical wear from the conveying fluid and may fail without warning. The user must determine the product life under such circumstances by testing. Also see
section 2.5.
4.6 Hose Inspection and Failure: Hydraulic power is accomplished by utilizing high pressure fluids to transfer energy and do work. Hoses, Fittings and Hose Assemblies all
contribute to this by transmitting fluids at high pressures. Fluids under pressure can be dangerous and potentially lethal and, therefore, extreme caution must be exercised when
working with fluids under pressure and handling the Hoses transporting the fluids. From time to time, Hose Assemblies will fail if they are not replaced at proper time intervals.
Usually these failures are the result of some form of misapplication, abuse, wear or failure to perform proper maintenance. When Hoses fail, generally the high pressure fluids
inside escape in a stream which may or may not be visible to the user. Under no circumstances should the user attempt to locate the leak by “feeling” with their hands or any other
part of their body. High pressure fluids can and will penetrate the skin and cause severe tissue damage and possibly loss of limb. Even seemingly minor hydraulic fluid injection
injuries must be treated immediately by a physician with knowledge of the tissue damaging properties of hydraulic fluid.
If a Hose failure occurs, immediately shut down the equipment and leave the area until pressure has been completely released from the Hose Assembly. Simply shutting down the
hydraulic pump may or may not eliminate the pressure in the Hose Assembly. Many times check valves, etc., are employed in a system and can cause pressure to remain in a Hose
Assembly even when pumps or equipment are not operating. Tiny holes in the Hose, commonly known as pinholes, can eject small, dangerously powerful but hard to see streams
of hydraulic fluid. It may take several minutes or even hours for the pressure to be relieved so that the Hose Assembly may be examined safely.
Once the pressure has been reduced to zero, the Hose Assembly may be taken off the equipment and examined. It must always be replaced if a failure has occurred. Never attempt
to patch or repair a Hose Assembly that has failed. Consult the nearest Parker distributor or the appropriate Parker division for Hose Assembly replacement information.
Never touch or examine a failed Hose Assembly unless it is obvious that the Hose no longer contains fluid under pressure. The high pressure fluid is extremely dangerous and can
cause serious and potentially fatal injury.
4.7 Elastomeric seals: Elastomeric seals will eventually age, harden, wear and deteriorate under thermal cycling and compression set. Elastomeric seals should be inspected and
replaced.
4.8 Refrigerant gases: Special care should be taken when working with refrigeration systems. Sudden escape of refrigerant gases can cause blindness if the escaping gases
contact the eye and can cause freezing or other severe injuries if it contacts any other portion of the body.
4.9 Compressed natural gas (CNG): Parker CNG Hose Assemblies should be tested after installation and before use, and at least on a monthly basis per ANSI/IAS NGV
4.2-1999; CSA 12.52-M99 Section 4.2 “Visual Inspection Hose/Fitting”. The recommended procedure is to pressurize the Hose and check for leaks and to visually inspect the
Hose for damage.
Caution: Matches, candles, open flame or other sources of ignition shall not be used for Hose inspection. Leak check solutions should be rinsed off after use.
5.0 HOSE STORAGE
Warranty
5.1 Age Control: Hose and Hose Assemblies must be stored in a manner that facilitates age control and first-in and first-out usage based on manufacturing date of the Hose and
Hose Assemblies. The shelf life of rubber Hose or Hose Assemblies that have passed visual inspection and a proof test is 10 years (40 quarters) from the date of manufacture. The
shelf life of thermoplastic and polytetrafluoroethylene Hose or Hose Assemblies is considered to be unlimited.
5.2 Storage: Stored Hose and Hose Assemblies must not be subjected to damage that could reduce their expected service life and must be placed in a cool, dark and dry area
with the ends capped. Stored Hose and Hose Assemblies must not be exposed to temperature extremes, ozone, oils, corrosive liquids or fumes, solvents, high humidity, rodents,
insects, ultraviolet light, electromagnetic fields or radioactive materials.
71
OFFER OF SALE
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation,
its subsidiaries and its authorized distributors (“Seller”) are hereby offered for sale at prices to be established by
Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and
Conditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in
writing, shall constitute acceptance of this offer. All goods or work described will be referred to as “Products”.
1. Terms and Conditions. Seller’s willingness to offer
Products, or accept an order for Products, to or from Buyer is
expressly conditioned on Buyer’s assent to these Terms and
Conditions and to the terms and conditions found on-line at
www.parker.com/saleterms/. Seller objects to any contrary
or additional term or condition of Buyer’s order or any other
document issued by Buyer.
2. Price Adjustments; Payments. Prices stated on the reverse
side or preceding pages of this document are valid for 30 days.
After 30 days, Seller may change prices to reflect any increase
in its costs resulting from state, federal or local legislation,
price increases from its suppliers, or any change in the rate,
charge, or classification of any carrier. The prices stated on the
reverse or preceding pages of this document do not include any
sales, use, or other taxes unless so stated specifically. Unless
otherwise specified by Seller, all prices are F.O.B. Seller’s
facility, and payment is due 30 days from the date of invoice.
After 30 days, Buyer shall pay interest on any unpaid invoices
at the rate of 1.5% per month or the maximum allowable rate
under applicable law.
3. Delivery Dates; Title and Risk; Shipment. All delivery
dates are approximate and Seller shall not be responsible
for any damages resulting from any delay. Regardless of the
manner of shipment, title to any products and risk of loss
or damage shall pass to Buyer upon tender to the carrier at
Seller’s facility (i.e., when it’s on the truck, it’s yours). Unless
otherwise stated, Seller may exercise its judgment in choosing
the carrier and means of delivery. No deferment of shipment
at Buyers’ request beyond the respective dates indicated will
be made except on terms that will indemnify, defend and
hold Seller harmless against all loss and additional expense.
Buyer shall be responsible for any additional shipping charges
incurred by Seller due to Buyer’s changes in shipping, product
specifications or in accordance with Section 13, herein.
4. Warranty. Seller warrants that the Products sold hereunder
shall be free from defects in material or workmanship for a
period of twelve months from the date of delivery to Buyer
or 2,000 hours of normal use, whichever occurs first. This
warranty is made only to Buyer and does not extend to
anyone to whom Products are sold after purchased from
Seller. The prices charged for Seller’s products are based
upon the exclusive limited warranty stated above, and upon
the following disclaimer: DISCLAIMER OF WARRANTY: THIS
WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY
PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.
5. Claims; Commencement of Actions. Buyer shall promptly
inspect all Products upon delivery. No claims for shortages
will be allowed unless reported to the Seller within 10 days of
delivery. No other claims against Seller will be allowed unless
asserted in writing within 60 days after delivery or, in the case
of an alleged breach of warranty, within 30 days after the date
within the warranty period on which the defect is or should
have been discovered by Buyer. Any action based upon breach
of this agreement or upon any other claim arising out of this
sale (other than an action by Seller for any amount due to Seller
from Buyer) must be commenced within thirteen months from
the date of tender of delivery by Seller or, for a cause of action
based upon an alleged breach of warranty, within thirteen
months from the date within the warranty period on which the
defect is or should have been discovered by Buyer.
6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL,
AT ITS OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE
PURCHASE PRICE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING,
USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR
ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S
WRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN
CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER’S
LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE
OF THE PRODUCTS.
7. Contingencies. Seller shall not be liable for any default or
delay in performance if caused by circumstances beyond the
reasonable control of Seller.
8. User Responsibility. The user, through its own analysis and
testing, is solely responsible for making the final selection of
the system and Product and assuring that all performance,
endurance, maintenance, safety and warning requirements
of the application are met. The user must analyze all aspects
of the application and follow applicable industry standards
and Product information. If Seller provides Product or system
options, the user is responsible for determining that such data
and specifications are suitable and sufficient for all applications
and reasonably foreseeable uses of the Products or systems.
9. Loss to Buyer’s Property. Any designs, tools, patterns,
materials, drawings, confidential information or equipment
furnished by Buyer or any other items which become Buyer’s
property, may be considered obsolete and may be destroyed by
Seller after two consecutive years have elapsed without Buyer
placing an order for the items which are manufactured using such
property. Seller shall not be responsible for any loss or damage
to such property while it is in Seller’s possession or control.
10. Special Tooling. A tooling charge may be imposed for
any special tooling, including without limitation, dies, fixtures,
molds and patterns, acquired to manufacture Products. Such
72
Catalog Number 5162E
17. Termination. This agreement may be terminated by
Seller for any reason and at any time by giving Buyer thirty
(30) days written notice of termination. In addition, Seller may
by written notice immediately terminate this agreement for
the following: (a) Buyer commits a breach of any provision of
this agreement (b) the appointment of a trustee, receiver or
custodian for all or any part of Buyer’s property (c) the filing of
a petition for relief in bankruptcy of the other Party on its own
behalf, or by a third party (d) an assignment for the benefit of
creditors, or (e) the dissolution or liquidation of the Buyer.
special tooling shall be and remain Seller’s property
notwithstanding payment of any charges by Buyer. In no event
will Buyer acquire any interest in apparatus belonging to Seller
which is utilized in the manufacture of the Products, even if
such apparatus has been specially converted or adapted for
such manufacture and notwithstanding any charges paid by
Buyer. Unless otherwise agreed, Seller shall have the right to
alter, discard or otherwise dispose of any special tooling or
other property in its sole discretion at any time.
11. Buyer’s Obligation; Rights of Seller. To secure payment
of all sums due or otherwise, Seller shall retain a security
interest in the goods delivered and this agreement shall
be deemed a Security Agreement under the Uniform
Commercial Code. Buyer authorizes Seller as its attorney
to execute and file on Buyer’s behalf all documents Seller
deems necessary to perfect its security interest. Seller shall
have a security interest in, and lien upon, any property of
Buyer in Seller’s possession as security for the payment of
any amounts owed to Seller by Buyer.
18. Governing Law. This agreement and the sale and
delivery of all Products hereunder shall be deemed to have
taken place in and shall be governed and construed in
accordance with the laws of the State of Ohio, as applicable to
contracts executed and wholly performed therein and without
regard to conflicts of laws principles. Buyer irrevocably
agrees and consents to the exclusive jurisdiction and venue
of the courts of Cuyahoga County, Ohio with respect to any
dispute, controversy or claim arising out of or relating to this
agreement. Disputes between the parties shall not be settled
by arbitration unless, after a dispute has arisen, both parties
expressly agree in writing to arbitrate the dispute.
12. Improper use and Indemnity. Buyer shall indemnify,
defend, and hold Seller harmless from any claim, liability,
damages, lawsuits, and costs (including attorney fees),
whether for personal injury, property damage, patent,
trademark or copyright infringement or any other claim,
brought by or incurred by Buyer, Buyer’s employees, or any
other person, arising out of: (a) improper selection, improper
application or other misuse of Products purchased by Buyer
from Seller; (b) any act or omission, negligent or otherwise,
of Buyer; (c) Seller’s use of patterns, plans, drawings, or
specifications furnished by Buyer to manufacture Product; or
(d) Buyer’s failure to comply with these terms and conditions.
Seller shall not indemnify Buyer under any circumstance
except as otherwise provided.
19. Indemnity for Infringement of Intellectual Property Rights.
Seller shall have no liability for infringement of any patents,
trademarks, copyrights, trade dress, trade secrets or similar
rights except as provided in this Section. Seller will defend
and indemnify Buyer against allegations of infringement of
U.S. patents, U.S. trademarks, copyrights, trade dress and
trade secrets (“Intellectual Property Rights”). Seller will
defend at its expense and will pay the cost of any settlement
or damages awarded in an action brought against Buyer
based on an allegation that a Product sold pursuant to this
Agreement infringes the Intellectual Property Rights of
a third party. Seller’s obligation to defend and indemnify
Buyer is contingent on Buyer notifying Seller within ten
(10) days after Buyer becomes aware of such allegations of
infringement, and Seller having sole control over the defense
of any allegations or actions including all negotiations
for settlement or compromise. If a Product is subject to a
claim that it infringes the Intellectual Property Rights of
a third party, Seller may, at its sole expense and option,
procure for Buyer the right to continue using the Product,
replace or modify the Product so as to make it noninfringing,
or offer to accept return of the Product and return the
purchase price less a reasonable allowance for depreciation.
Notwithstanding the foregoing, Seller shall have no liability
for claims of infringement based on information provided
by Buyer, or directed to Products delivered hereunder for
which the designs are specified in whole or part by Buyer, or
infringements resulting from the modification, combination or
use in a system of any Product sold hereunder. The foregoing
provisions of this Section shall constitute Seller’s sole and
exclusive liability and Buyer’s sole and exclusive remedy for
infringement of Intellectual Property Rights.
13. Cancellations and Changes. Orders shall not be subject
to cancellation or change by Buyer for any reason, except with
Seller’s written consent and upon terms that will indemnify,
defend and hold Seller harmless against all direct, incidental
and consequential loss or damage. Seller may change
product features, specifications, designs and availability with
notice to Buyer.
14. Limitation on Assignment. Buyer may not assign its
rights or obligations under this agreement without the prior
written consent of Seller.
15. Entire Agreement. This agreement contains the entire
agreement between the Buyer and Seller and constitutes
the final, complete and exclusive expression of the terms
of the agreement. All prior or contemporaneous written or
oral agreements or negotiations with respect to the subject
matter are herein merged.
16. Waiver and Severability. Failure to enforce any provision
of this agreement will not waive that provision nor will any
such failure prejudice Seller’s right to enforce that provision
in the future. Invalidation of any provision of this agreement
by legislation or other rule of law shall not invalidate any
other provision herein. The remaining provisions of this
agreement will remain in full force and effect.
20. Taxes. Unless otherwise indicated, all prices and charges
are exclusive of excise, sales, use, property, occupational or
like taxes which may be imposed by any taxing authority upon
the manufacture, sale or delivery of Products.
01/09
73
74
INDEX
090...........................................................55
10191N.....................................................40
10391N.....................................................40
10691N.....................................................41
10691NRD................................................41
10791N.....................................................42
10891N.....................................................42
12891N.....................................................42
13491N.....................................................43
13791N.....................................................43
13991N.....................................................44
14191N.....................................................44
16191N.....................................................44
16791N.....................................................45
16991N.....................................................45
17791N.....................................................45
17991N.....................................................46
19291N.....................................................50
1AL91N.....................................................46
1B291N....................................................50
1HV91N....................................................49
1J191N.....................................................47
1J791N.....................................................47
1J991N.....................................................48
1JC91N....................................................48
1P691N.....................................................46
1Q191N....................................................49
1TU91N....................................................50
1VH91N....................................................49
20090.......................................................55
20190.......................................................51
20690.......................................................51
20890.......................................................52
22890.......................................................52
23490.......................................................52
23790.......................................................53
23990.......................................................53
2404.........................................................35
2405.........................................................35
2501.........................................................35
26190.......................................................53
26790.......................................................54
26990.......................................................54
27790.......................................................54
27990.......................................................55
60HAB......................................................55
61HAB......................................................55
90 Series...................................................51
91N Series................................................39
944B.........................................................20
955B.........................................................20
Accessories..............................................56
Adapters...................................................35
Armour Guard...........................................57
B2.............................................................57
BWP40-S..................................................32
BWT-S......................................................32
C-S...........................................................29
Cam & Groove Fittings.............................29
CBV..........................................................11
CL-S.........................................................29
Convoluted Hose........................................7
Collars......................................................33
Convoluted Tubing...................................10
Crimp Fittings.....................................23, 39
CWV.........................................................11
EPDM Covered Hose...............................22
E-S............................................................29
FBS-S.......................................................... 25
Field Attachable Fitting................................ 51
FIL-S............................................................ 25
Fire Sleeve................................................... 56
Fittings................................................... 23, 39
FJX.............................................................. 31
Flange Fittings............................................. 28
Flare-Seal™ Hose....................................... 12
Food Transfer Hose..................................... 18
FORFS......................................................... 31
FP................................................................ 31
Heat Shrink.................................................. 57
High Pressure Hose..................................... 20
Industrial Adapters...................................... 35
Industrial Hose............................................ 37
Industrial Fittings, Crimp....................... 31, 39
Industrial Fittings, Field Attach.������������������ 51
Instrumentation Fittings............................... 32
MBS-S......................................................... 25
MIL-S........................................................... 25
MP............................................................... 31
MSAN-S...................................................... 24
NCB............................................................. 17
NCW............................................................ 17
Nomex......................................................... 17
Open Pitch Hose........................................... 9
Open Pitch Tubing....................................... 10
PAGE-flex SBF™......................................... 18
PC300.......................................................... 33
PCBV............................................................. 9
PCBV-FS..................................................... 13
PCB............................................................... 8
PCW.............................................................. 8
PCWV............................................................ 9
PCWV-FS.................................................... 13
PF................................................................ 28
Platinum Cured Hose.................................. 14
PLCF-S........................................................ 32
RC300......................................................... 34
RCTB........................................................... 22
RCTW.......................................................... 22
Rubber Covered Hose................................. 22
S30.............................................................. 37
S40.............................................................. 37
SAG............................................................. 57
Sanitary Fittings........................................... 23
SAN-S.................................................... 23, 24
SBF300........................................................ 34
SBFB........................................................... 19
SBFW.......................................................... 19
SBP............................................................. 14
SC300.......................................................... 33
SCB............................................................... 8
SCBV............................................................. 9
SCBV-FS..................................................... 13
SCW.............................................................. 8
SCWV............................................................ 9
SCWV-FS.................................................... 13
SFR-S.......................................................... 28
SFS.............................................................. 56
SG............................................................... 57
SIL300......................................................... 34
Silicone Hose.............................................. 14
Specialty Hose............................................ 16
Spring Guard............................................... 57
ST300.......................................................... 33
STB................................................................ 6
STW............................................................... 6
SWPV.......................................................... 14
iiii
TECHNICAL HELP...............................58
Hose Assembly Guide...........................
Crimp Assembly Guide................63
FA Assembly Guide......................66
Hose Braiding Guide.........................60
Hose Diameter/Flow Chart................62
Hose - Measuring Length..................59
Hose Fitting Selection Chart.............58
Material Properties............................61
Offer of Sale......................................72
Part Numbering - Nomenclature����������
Silicone PN System .....................15
S30/S40 PN System.....................38
True-Bore PN System.....................5
Safety Guide......................................69
Sanitary Dimension Chart..................26
TEC-S...................................................29
TECL-S.................................................29
TEE-S...................................................30
TEFLA-S...............................................30
TEFR-S.................................................28
TESG....................................................30
True-Bore Hose......................................6
Weld Fittings.........................................32
TUBE-S................................................32
We make Custom Hoses
to your specifications
everyday.
Contact Customer Service for
more information.
PARKER/PAGE International is a leading manufacturer of Flexible Fluoroplastic Hose products.
As an innovator in the design and production of seamless convoluted hoses and special application
assemblies, PARKER/PAGE supplies products to a wide variety of customers around the world.
Our experience extends into such diverse markets as chemical manufacturing, pharmaceutical
processing, food handling and semiconductor production. From our manufacturing and fabrication
facility in Fort Worth, Texas, we offer fluid transport solutions worldwide.
PARKER/PAGE PTFE Hose product materials are compliant
with the following requirements:
FDA 21 CFR 177.1550, 177.2600
UPS XXIII Class VI Requirements
European Pharmacopoeia 3.1.9
ISO 10993 Sections 5, 6 10, 11
USDA Standards
3A Standards
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or
system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application
and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final
selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject
to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its
subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions
stated in the “Offer of Sale”.
Copyright 2010, Parker Hannifin Corporation. All rights reserved.
© 2011 Parker Hannifin Corporation
CAT 5162E
Parker Hannifin Corporation
Parflex Division/PAGE International Hose
4700 Lone Star Blvd.
Fort Worth, TX 76106
phone 817.624.1329 800.847.7280
fax
817.625.1901 888.293.2667
email: [email protected]
02/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement