Catalogue Sheet: LPSR300 Series

Catalogue Sheet: LPSR300 Series
Project/Location:
Contractor:
Date:
LPSR300 Series
Prepared by:
Extruded Aluminum “Sortie” Sign
FEATURES
TYPICAL SPECIFICATIONS
• Thin profile, two-piece extruded aluminum housing simply slides
together
Supply and install the Emergi-Lite® LPSR300 Series LED Exit Sign.
The equipment shall operate with universal AC input voltage of 120,
277 or 347VAC at less than 1.5W and universal two-wire DC input
voltage from 6VDC to 24VDC at less than 1.5W for single and double
face signs. The Exit Sign shall consist of a two-piece white extruded
aluminum combined body/faceplate with a maximum depth of 1-1/4”.
The exit shall also include extruded aluminum end caps with white
gaskets in order to provide protection to the internal components
and eliminate any possible light leaks. The exit fixture shall be either
single or double-faced as shown on the drawings. The faceplate shall
be of a stencil design and will incorporate 6” high letters with a 3/4”
stroke. The canopy shall fasten to the exit body for ease of
installation in either ceiling or end to wall mount.
• Mounting to be pre-specified
• Standard field-selectable directional knockout chevrons
• Indirect refractive lighting technology provides bright, even
illumination
• Long life, energy-efficient ALINGAP LED light source
• Energy efficient: consumes less than 3.5W
• Normal AC and emergency DC operation –
120/277/347VAC and 6V to 24VDC input
• CSA certified, meets or exceeds C860 requirements
The fixture shall contain a light source, which shall be LED with a
long life and shall consist of separate AC and DC LED sources in
the case of AC/DC-remote equipment. Red LED technology shall be
ALINGAP.
DIMENSIONS
The Exit Sign in a Self-Powered configuration shall be equipped
with a Nickel-Cadmium battery and shall stay illuminated during
emergency operation for at least two hours upon AC failure.
Dimensions are approximate and subject to change.
47/8” [12.5 cm]
The Exit Sign shall be CSA-C860 approved.
460.0057-E
Wall Mount
460.0048-E
End Mount
460.0058-E
Ceiling Mount
POWER CONSUMPTION
13/8” [3.4 cm]
191/8” [48.6 cm]
.
WIRE GUARDS
95/8” [24.3 cm]
55/8” [14.2 cm]
87/8” [22.5 cm]
The equipment shall be Emergi-Lite® Model:
MODEL
19 ” [50.4 cm]
7/8
AC SPECS
DC SPECS
AC/DC
standard, red
120/277/347VAC
Less than
1.5W
6 to 48VDC
Less
than
1.5W
AC/ special
DC, red
120/277/347VAC
Less than
1.5W
36/48/120VDC
Less
than 3W
120VAC/DC
two wires, red
120VAC
Less than
3W
120VDC
Min. 3W
Self-Powered,
red
120/347VAC
Less than Nickel-Cadmium
3.5W
battery
Min. 2
hours
ORDERING INFORMATION
SERIES
FACEPLATES
LPSR30= SORTIE
2= single face
3= double face
COLOUR
W= polar white
B= black
TA= textured
aluminum
BA= brushed
aluminum
MOUNTING
-CM= ceiling mount
-EM= end mount
-WM= wall mount
SUPPLY VOLTAGE
-U= 120/277/347VAC, 6 to 24VDC
-U36= 120/277/347VAC, 36VDC
-U48= 120/277/347VAC, 48VDC
-U120= 120/277/347VAC, 120VDC
-I= 120/347VAC Self-Powered
-EM120-2W= 120VAC - 120VDC
- 2 wires
OPTIONS
-TP= tamper-proof screws
990.0119-E= tamper-proof
bit*
*One bit needed per order.
EXAMPLE: CS4000WHULTP
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement