User’s Guide
Notations Used in This Guide
• Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
• General information indications
Attention
q
Indicates procedures which may result in damage or injury if sufficient care is not taken.
Indicates additional information and points which may be useful to know regarding a topic.
s
Indicates a page where detailed information regarding a topic can be found.
g
Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix". s p.132
Procedure
Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbered steps.
[(Name)]
Indicates the name of the buttons on the Remote Control or the Control panel.
Example: [Esc] button
"(Menu Name)"
Brightness
Indicates Configuration Menu items.
Example:
Select "Brightness" from the Image menu.
Image menu - Brightness
Contents
3
Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2
Switch to the target image by Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Connecting with a USB Cable and Projecting (USB Display) . . . . 23
Introduction
Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Convenient Equipment Designed for Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . 7
Easy to handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Enhanced security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Controlling Computer on Projection Surface (EB-465i/455Wi Only) . . . . . . . . . . . . . 8
Easy Interactive Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Drawing function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Selecting Various Input Sources with Multi-Connection . . . . . . . . . . . . . . . . . . . . 8
Taking full advantage of a network connection . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting with a USB cable and projecting (USB Display) . . . . . . . . . . . . . . . . 9
Projecting a computer screen with the optional Quick Wireless Connection USB
Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Projecting JPEG images without connecting a computer . . . . . . . . . . . . . . . . . 10
Enlarge and project your files with the Document Camera . . . . . . . . . . . . . . . . 10
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front/Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base (with Slide Plate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base (without Slide Plate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Easy Interactive Pen(EB-465i/455Wi Only) . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
11
12
13
14
15
15
16
18
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting for the first time . . . . . . . . . . . . . . . . . . .
From the second time . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
23
24
24
27
Presentations Using Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Files that can be Projected Using Slideshow . . . . . . . . . . . . . . . . . . . . . . .
Specifications for files that can be projected using Slideshow . . . . . . . . . .
Slideshow usage examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slideshow Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting and closing Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slideshow basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rotating images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projecting Image Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projecting images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projecting all image files in a folder in sequence (Slideshow) . . . . . . . . . .
Image File Display Settings and Slideshow Operation Settings . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
28
28
28
29
29
29
30
31
31
32
33
Connecting External Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Connecting and Removing USB Devices . . . . . . . . . . . . . . . . . . . . . .
Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting an External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting External Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
34
34
34
35
36
36
Connecting a LAN Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installing the Wireless LAN Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Various Ways to Use the Projector
Changing the Installation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing the Projected Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Automatically Detect Input Signal and Change the Projected Image (Source Search)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Functions for Enhancing Projection . . . . . . . . . . . . . . . . . . . . . . . . . 39
Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . .
Setting the Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hiding the Image and Sound Temporarily (A/V Mute) . . . . . . . . . . . . . . . . .
Freezing the Image (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
39
40
40
41
41
Contents
4
Changing methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the aspect ratio for video equipment images . . . . . . . . . . . . . .
Changing the aspect ratio for computer images (EB-465i/460) . . . . . . . . .
Changing the aspect ratio for computer images (EB-455Wi/450W/440W) . .
Using the Pointer to Highlight Sections (Pointer) . . . . . . . . . . . . . . . . . . . .
Enlarging Part of the Image (E-Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating the Mouse Pointer by Remote Control (Wireless Mouse) . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41
42
43
44
46
47
48
Security Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Managing Users (Password Protect) . . . . . . . . . . . . . . . . . . . . . . . . .
Type of Password Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Password Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restricting Operation (Control Panel Lock) . . . . . . . . . . . . . . . . . . . .
Anti-Theft Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the wire lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
50
50
50
51
52
53
53
Easy Interactive Function (EB-465i/455Wi only) . . . . . . . . . . . . . . 54
Summary of Easy Interactive Function . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First time Easy Interactive Function is used . . . . . . . . . . . . . . . . . . . . . .
From the second time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First time Easy Interactive Function is used . . . . . . . . . . . . . . . . . . . . . . . .
Using Easy Interactive Function from the Second Time . . . . . . . . . . . . . . . .
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cases in which calibration is required . . . . . . . . . . . . . . . . . . . . . . . . . .
Tablet Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the Batteries for the Easy Interactive Pen . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
54
55
55
55
55
56
60
61
61
62
62
62
62
Changing Settings Using a Web Browser (Web Control) . . . . . . . 64
Displaying Web Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Entering the IP address of the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Displaying Web Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Using the Mail Notification Function to Report Problems . . . . . . 67
Management Using SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Saving a User's Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Saving User Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Configuration Menu
Using the Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extended Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes on using the Network menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Soft keyboard operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless LAN Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When WEP is selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When WPA-PSK (TKIP) or WPA2-PSK (AES) is selected . . . . . . . . . . . . . . .
Wired LAN menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mail menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Others Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Info Menu (Display Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
74
75
76
78
80
81
81
82
83
84
85
85
86
87
88
89
90
91
Contents
5
Screen Size and Projection Distance . . . . . . . . . . . . . . . . . . . . . . . . 118
Troubleshooting
Using the Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Projection Distance of EB-465i/460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Projection Distance of EB-455Wi/450W/440W . . . . . . . . . . . . . . . . . . . . . . . . . 118
Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
List of Supported Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Reading the Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
t indicator is lit or flashing red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
m o indicator is flashing or lit orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When the Indicators Provide No Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Problems relating to images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Problems when projection starts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Problems relating to monitoring and control . . . . . . . . . . . . . . . . . . . . . . . .
Problems relating to Easy Interactive Function . . . . . . . . . . . . . . . . . . . . . . .
Other problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 94
. 95
. 96
. 97
. 98
102
103
103
105
Reading Error Notification Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Appendix
Cleaning Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Cleaning the Projector's Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Cleaning the Projection Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Cleaning the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Replacing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Replacing the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lamp replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to replace the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting the Lamp Hours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air filter replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to replace the air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111
112
112
112
115
115
115
115
Optional Accessories and Consumables . . . . . . . . . . . . . . . . . . . . 117
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Resolutions Supported by EB-465i/460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Computer signals (analog RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Component Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Composite Video/S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resolutions Supported by EB-455Wi/450W/440W . . . . . . . . . . . . . . . . . . . . . . .
Computer signals (analog RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Component Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Composite Video/S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120
120
120
120
120
120
121
121
ESC/VP21 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Command List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Communications protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
122
123
123
123
About PJLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Projector General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Wireless Telegraphy Act Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
About Notations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
General Notice: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Introduction
This chapter explains the projector's features and the part names.
Projector Features
Convenient Equipment Designed for Ease of Use
Easy to handle
• Easy wall mounting
The projector is supplied with a dedicated slide plate that makes
troublesome wall mounting easy.
The slide plate is integrated into the projector main unit, so mounting is
easy and installation time has been reduced compared to previous models.
s Installation Guide
You can also perform maintenance such as replacing the air filter and
lamp simply while projector is mounted to a wall.
• No special screen required
Installation in a wide range of places is possible because you can project
images onto a projection surface such as a wall if there is no projector
screen.
• Short distance projection
At 47 cm, the recommended shortest projection distance allows you to
place the projector close to the screen. s p.118
If you mount the projector to a wall and project images from diagonally
above, you can give your presentation without the shadow of anybody
who stands up near the projection surface appearing in the images.
Furthermore, when your back is facing the screen, the projector light does
not dazzle you because it does not interfere with your field of view.
• Pointing down projection is useful for group tutorials (EB-465i/
455Wi only)
By setting up the projector vertically, you can project down onto the
surface of a table. s p.20
• Direct power on/off
In places where power is managed centrally, such as in a conference
room, you can set the projector to turn on or off when the main power
source to which the projector is connected is switched on or off.
7
• Display of projection lines on the projection surface
The pattern function for projecting ruled lines or a grid enables effective
use of the projection surface in lessons and presentations.
• Speaker
The incorporation of a high-output speaker allows your voice to reach the
edges of the room even in spacious classrooms.
• Projection screen for WXGA (EB-455Wi/450W/440W only)
With a computer that has a 16:10 WXGA wide LCD display, the image
can be projected in the same aspect. This allows you to effectively use the
width of whiteboards and other landscape-oriented projection surfaces.
• Control the projector from a computer
You can use the Web Control function and Web Remote function to
perform the same operations on a computer as with the projector's
control panel or remote control. s p.64
Enhanced security functions
• Password Protect to restrict and manage users
By setting a Password you can restrict who can use the projector.
s p.50
• Control Panel Lock restricts button operation on the Control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on. s p.52
• Equipped with anti-theft security devices
The projector is equipped with the following types of anti-theft security
functions. s p.53
• Security slot
• Security cable installation point
Projector Features
Controlling Computer on Projection Surface
(EB-465i/455Wi Only)
Easy Interactive Function
By simply connecting a computer to the projector, you can control the
computer on the projection screen and give an effective, interactive
presentation or lesson. s p.54
Drawing function
You can use a graphics application to import text and diagrams have been
hand-drawn on the projection surface with an electronic pen (Easy
Interactive Pen). This combines the functions of a whiteboard and screen
without the need for either. s p.54
8
Selecting Various Input Sources with MultiConnection
As well as connecting a computer cable, you can select various interfaces
such as a USB cable, USB memory, or LAN connection. This allows you to
select from a range of input sources to match your usage environment.
Taking full advantage of a network connection
You can make effective use of your network by using the supplied EasyMP
Network Projection (software) to perform efficient and varied presentations
and meetings. s EasyMP Network Projection Operation Guide
• Connect a Computer to the projector via a network
You can project by connecting to an already constructed network system.
You can hold efficient meetings by projecting from multiple computers
connected to a network system without having to change any cables.
• Connecting wirelessly to a computer
When you install the optional wireless LAN unit in the projector, you can
connect wirelessly to a computer. s p.38
• Connection method for various networks
The following methods are available for connecting the projector to a
network. Select whichever method suites your environment. s EasyMP
Network Projection Operation Guide
• Advanced Connection Mode
Advanced Connection Mode is an infrastructure connection, offering you a
method of connecting to an already constructed network.
• Quick Connection Mode
Quick Connection Mode is a connection method that can only be executed
when the optional wireless LAN unit is installed.
Quick Connection Mode temporarily allocates the projector's SSID to the
computer and makes an ad-hoc connection, and then restores the computer's network settings after disconnecting.
Projector Features
Connecting with a USB cable and projecting (USB Display)
9
• Connect to the network via an access point.
By simply connecting the supplied USB cable to a computer, you can
project images from the computer's screen.
s Quick Start Guide , p.23
• Connect to the network via a wired LAN connection.
Projecting a computer screen with the optional Quick Wireless
Connection USB Key
Using the optional Quick Wireless Connection USB Key, you can quickly
connect a computer to the projector for projection.
With the Quick Wireless Connection USB Key, you can connect to a
projector on a network even if EasyMP Network Projection is not installed.
For example, you can connect under the following environments.
• Connect in Quick Connection Mode using the optional Wireless LAN
unit.
s p.117
q
• This projector is not compatible with the Network Projector
function which is a standard feature in Windows Vista and
Windows 7.
• Limitations when projecting from Windows Media Center
When Windows Media Center is in full-screen mode, images cannot
be projected. Switch to the window display mode to project the
images.
Projector Features
Projecting JPEG images without connecting a computer
You can project a slideshow of JPEG images saved on a USB device such as
a USB compatible digital camera, hard disk, or USB memory by simply
connecting to the projector. s p.28
Enlarge and project your files with the Document Camera
A USB compatible Document Camera is available as an optional extra.
With this Document Camera there is no need for a power cable. You can
connect easily with one USB cable, and its clean design really simplifies
projecting and enlarging your documents. s p.34
10
Part Names and Functions
11
Name
Front/Top
Name
Function
A Remote Receiver
Receives signals from the remote control.
s Quick Start Guide
B Lamp cover
Open this cover when replacing the projector's Lamp.
s p.112
C Lamp Cover Fixing
Screw
Screw to fix the Lamp cover in place. s p.112
D Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent.
Function
E Cable cover fixing
screws
Screws to fix the cable cover in place.
s Quick Start Guide
F Cable cover
When connecting to an input port, loosen the two screws
and open this cover.
s Quick Start Guide
G Control panel
Allows you to operate and check the status of the
projector. s p.15
H Speaker
Outputs audio from the Microphone (Mic) and the image
currently being projected.
Part Names and Functions
12
Name
Sides
Function
C Easy Interactive
Function receiver
(EB-465i/455Wi only)
Receives signals from the Easy Interactive Pen.
s p.54
D Projection window
Projects images.
Warning
• Do not look at this during projection.
• Do not place objects on or hand nears this. Doing
so is dangerous because the focus of projection
light results in high temperatures.
Name
E Wireless LAN unit
insertion slot
Insert the optional wireless LAN unit. s p.38
F Focus lever
Adjusts the image focus.
Opens the air filter cover and operates the focus lever.
s Quick Start Guide
G Air filter cover
Open this cover when replacing the air filter or installing
the optional Wireless LAN unit.
H Air intake vent
(Air filter)
Takes in air to cool the projector internally. If dust collects
here it can cause the internal temperature to rise, and this
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the Air filter
regularly. s p.109, p.115
I Air filter cover
open/close lever
Opens and closes the air filter cover. s p.115
Open this cover when installing the optional Wireless
LAN unit. s p.38
J Security slot
The Security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s p.53
Function
A Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place. s p.53
B Remote Receiver
Receives signals from the remote control.
s Quick Start Guide
Part Names and Functions
13
Name
Interfaces
C RS-232C port
When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used. s p.123
D Monitor Output
(Monitor Out) Port
Outputs the image signals from the computer connected
to the Computer1 input port to an external monitor. This
is not available for component video signals or other
signals being input to any port other than the Computer1
input port. s p.35
E USB(TypeB) port
Connects the projector to a computer via the supplied USB
cable to project images from the computer.
s p.23
Also use this port to connect to a computer via the
supplied USB cable to use the wireless mouse function.
s p.48
Also use this port to connect to a computer via the
supplied USB cable to use the Easy Interactive Function.
(EB-465i/455Wi only) s p.54
F USB(TypeA) port
Projects a JPEG image Slideshow when memories or
digital cameras are connected to the USB compatible port.
s p.28
Also connects to the optional Document Camera.
G USB indicator
Notifies you of the status of the USB device connected to
the USB(TypeA) port as described below.
OFF: USB device is not connected
Orange Light ON: USB device is connected
Green Light ON: USB device is operating
Red Light ON: Error
Remove the cable cover to view the following ports.
Remove the cable cover to connect equipment.
s Quick Start Guide
Name
A S-Video input port
Video input port
Audio Input port
B Power inlet
Function
For S-video signals from video sources.
For composite video signals from video sources.
Connects to the audio output port to output audio from
equipment connected to the S-Video input port or the
Video input port.
s Quick Start Guide
Connects to the power cable.
s Quick Start Guide
Function
Part Names and Functions
Name
H Computer2 input port
14
Function
Inputs image signals from a computer and component
video signals from other video sources.
Base (with Slide Plate)
A slide plate is attached to the projector main unit at the time of shipment.
Audio2 port
Connects to the audio output port of equipment
connected to the Computer2 input port to input audio.
Also, when the input source is one of the following and you
want to output audio from the projector, connect the
audio source to the Audio2 port.
- USB: When playing back a slideshow from a USB storage
device connected to the USB(TypeA) port, or when
projecting from the optional Document Camera
- USB Display
- LAN
s Quick Start Guide
I LAN port
Connects to a LAN cable and then to a network.
s p.37
J Computer1 input port
Inputs image signals from a computer and component
video signals from other video sources.
Audio1 port
Connects to the audio output port of equipment
connected to the Computer1 input port to input audio.
s Quick Start Guide
K Microphone (Mic)
input port
Connects to a microphone. s p.36
L Audio Output
(AudioOut) port
Outputs the audio of the images currently being projected
or the audio input from the Microphone (Mic) input port
to an external speaker. s p.36
Name
Function
A Slide plate
Connect this to the setting plate when mounting the
projector on a wall. s Installation Guide
B Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place. s p.53
Part Names and Functions
15
Base (without Slide Plate)
Control panel
Name
Name
A Ceiling mount fixing
points
(four points)
B Security cable
installation point
Function
Connect the ceiling mount fixing points to a commercially
available ceiling mount or wall mount when mounting the
projector to a ceiling or wall. For details, see the
documentation supplied with the the ceiling mount or
wall mount.
Pass a commercially available wire lock through here and
lock it in place. s p.53
Function
A [t] button
Turns the projector power on or off.
s Quick Start Guide
B Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.94
C [Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. s p.21
D [Enter] button
If pressed during projection of a computer image signal, it
automatically adjusts the Tracking-Sync., and Position to
project the optimum image.
When the Configuration Menu or Help screen is
displayed, pressing this button confirms the current item
and moves to the next level. s p.73
Part Names and Functions
Name
16
Function
E [w][v] buttons
Corrects Keystone distortion. In the following cases,
however, these buttons function as the [ ] and [ ]
buttons.
– When the projected image is being sent through a
Network connection
– When the Slideshow function is being used for
projection
If pressed when a Configuration Menu or Help screen is
displayed, these buttons selects menu items and setting
values.
s Quick Start Guide , p.73
F [Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.93
G [Esc] button
Stops the current function.
When the Configuration Menu is displayed, pressing this
button moves to the previous menu level. s p.73
H [Wide][Tele] button
Adjusts Tele/Wide. Press the [Tele] button to reduce the
size of the projection screen and press the [Wide] button
to increase the size of the projection screen.
When the Configuration Menu or Help screen is
displayed, these buttons function as the [ ][ ] buttons,
which select menu items and setting values.
s Quick Start Guide
I [Menu] button
Displays and closes the Configuration Menu.
s p.73
Remote Control
Part Names and Functions
Name
17
Function
A [t] button
Turns the projector power On or Off.
s Quick Start Guide
B [Computer] button
Each time you press the button, input changes between
images from the Computer1 input port and the
Computer2 input port. s p.22
C [Video] button
Each time you press the button, input changes between
images from the Video input port and the S-Video input
port. s p.22
D Numeric buttons
Use when entering a password. s p.50
E [A/V Mute] button
Temporarily turns the images and audio on or off.
s p.40
F [Freeze] button
Pauses or resumes image playback. s p.41
G [Auto] button
If pressed during projection of a computer image signal, it
automatically adjusts the Tracking-Sync., and Position to
project the optimum image.
H [Aspect] button
The Aspect Ratio changes each time the button is pressed.
s p.41
I [Page] buttons
([Up]) ([Down])
When you are using the Wireless Mouse function, USB
Display function, or the input source is projecting a file of
application software that supports page up/down via the
LAN, you can move the page up and down by pressing
these buttons. s p.48
Name
Function
M [Enter] button
When a Configuration Menu or a Help screen is displayed,
it accepts and enters the current selection and moves to the
next level.s p.73, p.93
Acts as a mouse's left button when using the Wireless
Mouse function. s p.48
N [Esc] button
Stops the current function. If pressed when the
Configuration menu is displayed, it moves to the previous
level. s p.73, p.93
Acts as a mouse's right button when using the Wireless
Mouse function. s p.48
O [Volume] buttons (a)
(b)
(a) Decreases the Volume.
(b) Increases the Volume.
s Quick Start Guide
Caution
Do not start when the volume is set too high.
A sudden increase in volume may cause loss of hearing. Always lower the volume before turning the
power off, and gradually increase the volume after
turning the power on.
P [Pointer] button
Press this button to activate the on-screen pointer.
s p.46
J [E-Zoom] buttons
(z)(x)
Enlarges or reduces the image without changing the
projection size. s p.47
Q [Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.93
K [Menu] button
Displays and closes the Configuration Menu. s p.73
R [Color Mode] button
Each time the button is pressed, the Color Mode changes.
s p.39
S [Num] button
Use when entering a Password. s p.50
L [
[
][
][
] buttons
]
When the Configuration Menu or Help screen is
displayed, pressing these buttons selects menu items and
setting values. s p.73, p.93
During Wireless Mouse function, the mouse pointer
moves in the direction the button is pushed. s p.48
Part Names and Functions
Name
18
Function
T [User] button
Select any frequently used item from the five available
Configuration Menu items, and assign it to this button. By
pressing the button the assigned menu item selection/
adjustment screen is displayed, allowing you to make onetouch settings/adjustments. s p.76
The menu Power Consumption is assigned as the default
setting.
U [USB] button
Each time you press the button, input changes between
images from the equipment connected to USB Display
and USB(TypeA) port. s p.22
V [LAN] button
Changes to the images projected with EasyMP Network
Projection. When you are projecting via Quick Wireless
Connection using the optional Quick Wireless
Connection USB Key, pressing this button changes to that
image. s p.22
W [Source Search]
button
Changes to images from the next device inputting an
image signal. s p.21
X Remote control lightemitting area
Outputs remote control signals.
Easy Interactive Pen(EB-465i/455Wi Only)
Name
Function
A Pen tip switch
Functions as the left button of a mouse.
B Battery indicator
When you press the button, this indicator lights green if
there is any remaining battery power.
It does not light if there is not much remaining battery
power. If this happens, replace the batteries. s p.62
C Button
Functions as the right button of a mouse.
D Strap attachment hole
You can attach a commercially available strap.
E Battery cover
Open this cover when replacing the batteries. s p.62
Various Ways to Use the Projector
This chapter explains useful functions for giving presentations, connecting external equipment, and security functions.
Changing the Installation Mode
The projector supports the following three different projection methods.
Install according to the conditions of the installation location.
• Suspend the projector from the
ceiling and project images from
in front of the screen. (Front/
Ceiling projection)
• Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
20
q
• Set the projection mode from the Configuration menu. s p.78
• Do not use any projection method other than Front/Ceiling, Rear/
Ceiling, or Front/Pointing Down projection.
Attention
• For more information on setting up, contact the nearest address provided in
the Support and Service Guide or your local dealer. If it is not installed
correctly, it could cause an accident and injury.
• When installing the projector, always use equipment that is suitable for the
installation method.
• Setting up vertically and projecting down (Front/Pointing Down
projection) (EB-465i/455Wi only)
At the time of shipment, the projector is set to be installed suspended from
a ceiling and to project images from the front of the screen
(Front/Ceiling).
Change the projection mode to suit the projection method.
Changing the Projected Image
You can change the projected image in the following two ways.
• Changing by Source Search
The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
• Changes to the target image.
You can use the Remote Control buttons to change to the target input
port.
Automatically Detect Input Signal and Change the
Projected Image (Source Search)
You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the [Source
Search] button.
21
F USB*: When the image is from a device connected to the USB(TypeA)
port.
G LAN: When the projector is connected to a computer via a network,
and images from EasyMP Network Projection are projected.
Skipped when no image signal is being input.
*USB input source indicates that a Slideshow is being played back from a
USB storage device connected to the USB(TypeA) port, or that images are
being projected from the optional Document Camera.
Procedure
When your video equipment is connected, start playback before
beginning this operation.
Using Remote Control
Using Control panel
When two or more pieces of equipment are connected, press the [Source
Search] button until the target image is projected.
A
B
C
D
E
Computer1
Computer2
S-Video
Video
USB Display
Changing the Projected Image
q
The following screen showing the status of image signals is displayed
when only the image that the projector is currently displaying is
available, or when no image signal can be found. You can select the
input port where the equipment you want to use is connected. If no
operation is performed after about 10 seconds, the screen closes.
Switch to the target image by Remote Control
You can change directly to the target image by pressing the following
buttons on the Remote Control.
Remote Control
A Each time you press the button, input changes between images from the
Computer1 input port and the Computer2 input port.
B Each time you press the button, input changes between images from the
Video input port and the S-Video input port.
22
C Each time you press the button, input changes between images from the
equipment connected to USB Display and USB(TypeA) port.
D Changes to the images projected with EasyMP Network Projection. When
you are projecting via Quick Wireless Connection using the optional Quick
Wireless Connection USB Key, pressing this button changes to that image.
Connecting with a USB Cable and Projecting (USB Display)
You can use the supplied USB cable to connect the projector to a computer
to project images from the computer. This function is called USB Display.
Simply by connecting via a USB cable, images from the computer can be
displayed.
To activate the USB Display function, set USB Type B to USB Display from
the Extended menu in the Configuration Menu.
The following shows the default settings for USB Type B.
• EB-465i/455Wi: Off
• EB-460/450W: USB Display
For EB-465i/455Wi, the setting needs to be changed in advance.
s p.78
System Requirements
For Windows
OS
Windows 2000 Service Pack 4
The following 32 bit operating systems:
Windows XP
Windows XP Service Pack 2 or later
Windows Vista
Windows Vista Service Pack 1 or later
Windows 7
The following 64 bit operating systems:
Windows 7 (compatible with Ver. 1.50 or later*)
CPU
Mobile Pentium III 1.2GHz or faster
Recommended: Pentium M 1.6GHz or faster
Amount of
Memory
256MB or more
Recommended: 512MB or more
Hard Disk
Free Space
20MB or more
Display
*
23
Resolution of no lower than 640x480 and no higher than
1600x1200.
Display color of 16-bit color or greater
You can download the latest version of the USB Display driver from the
following Web site.
http://www.epson.com/
For Mac OS
OS
Mac OS X 10.5.1 or later
Mac OS X 10.6.x
CPU
Power PC G4 1GHz or faster
Recommended: Intel Core Duo 1.83GHz or faster
Amount of
Memory
512MB or more
Hard Disk
Free Space
20MB or more
Display
Resolution of no lower than 640x480 and no higher than
1680x1200.
Display color of 16-bit color or greater
Connecting with a USB Cable and Projecting (USB Display)
Connecting
24
D Connect to the USB cable.
When outputting audio from the projector's speaker, connect
an audio cable (commercially available) to the Audio2 port.
s "Connecting for the first time" p.24
s "From the second time" p.27
Attention
Connect the projector directly to the computer and not via a USB hub.
Connecting for the first time
The first time you connect, the driver needs to be installed. The procedure
is different for Windows and Mac OS.
Procedure
For Windows
A Driver installation starts automatically.
When you are using Windows 2000, double-click My Computer EPSON_PJ_UD - EMP_UDSE.exe on your computer.
Procedure
A Turn on the computer.
B Connect to the power cable (supplied).
C Turn the projector on.
Connecting with a USB Cable and Projecting (USB Display)
25
C Computer images are projected.
It may take a while for computer images to be projected. Until the
computer images are projected, leave the equipment as is and do not
disconnect the USB cable or turn off the power of the projector.
When using a computer running Windows 2000 under user
authority, a Windows error message is displayed during installation
and you may not be able to install the software. In this case, try
updating Windows to the latest version, restart, and then try to
connect again.
For more details, contact the nearest address provided in the Support
and Service Guide. s Epson Projector Contact List
B When the License Agreement screen is displayed, click
"Agree".
If the driver is not installed, you cannot start USB Display. Select
Agree to install the driver. If you want to cancel installation, click
Disagree.
Connecting with a USB Cable and Projecting (USB Display)
q
• If it is not installed automatically, double-click My Computer EPSON_PJ_UD - EMP_UDSE.EXE, on your computer.
• If nothing is projected for some reason, click All Programs EPSON Projector - Epson USB Display - Epson USB Display
Vx.xx on your computer.
• If the mouse pointer flickers on the computer screen, click All
Programs - EPSON Projector - Epson USB Display - Epson USB
Display Vx.x, and then clear the Transfer layered window
checkbox.
• To uninstall the driver, open Control Panel - Add/Remove
Programs - and uninstall Epson USB Display.
• Disconnecting
The projector can be disconnected simply by disconnecting the USB
cable. There is no need to use the Safely Remove Hardware feature
in Windows.
26
E Computer images are projected.
It may take a while for computer images to be projected. Until the
computer images are projected, leave the equipment as is and do not
disconnect the USB cable or turn off the power of the projector.
When connecting next time, see s "From the second time" p.27.
For Mac OS
A The setup folder of USB Display is displayed in the Finder.
B Double-click the "USB Display Installer" icon.
C Follow the on-screen instructions to install.
D When the License Agreement screen is displayed, click
"Agree".
Enter the administrator authority password and start the installation.
If you do not select Agree, USB Display cannot be started. If you
want to cancel projection, click Disagree.
When the installation is complete, the USB Display icon is displayed
in the Dock and menu bar.
q
• If the USB Display setup folder is not displayed automatically in the
Finder, double-click EPSON PJ_UD - USB Display Installer on
your computer.
• If nothing is projected for some reason, click the USB Display icon
in the Dock.
• If there is no USB Display icon in the Dock, start USB Display
from the Applications folder.
• To uninstall the driver, start USB Display UnInstaller in the Tool
folder of the Applications folder.
Connecting with a USB Cable and Projecting (USB Display)
Attention
• To disconnect USB Display, click the menu bar icon or Dock icon, select
Disconnect from the menu that is displayed, and then remove the USB cable.
• If you select Exit from the Dock icon menu, USB Display does not start
automatically when you connect the USB cable.
From the second time
Computer images are projected.
It may take a while for computer images to be projected. Please wait.
q
For Windows
• Applications that use part of DirectX functions may not be displayed
correctly.
• Disconnecting
The projector can be disconnected simply by disconnecting the USB
cable. There is no need to use the Safely Remove Hardware feature.
• Limitations when projecting from Windows Media Center
When Windows Media Center is in full-screen mode, images cannot
be projected. Switch to the window display mode to project the
images.
For Mac OS
If images are not projected, start USB Display from the Applications
folder.
27
Presentations Using Slideshow
Files that can be Projected Using Slideshow
You can use Slideshow to directly project files stored in a USB storage
device or digital camera connected to the projector.
q
28
Slideshow usage examples
Projecting images stored on USB storage and other media
You may not be able to use USB storage devices that incorporate
security functions.
Specifications for files that can be projected using Slideshow
Type
File Type (Extension)
Still image .jpg
q
Notes
The following cannot be projected.
- CMYK color mode format
- Progressive format
- Images with a resolution greater than 4608x3072
- Files with the extension ".jpeg"
Due to the characteristics of JPEG files, images may
not be projected clearly if the compression ratio is too
high.
• When using a USB hard disk, we recommend using an AC adapter
power supply.
• The projector does not support some file systems, so use media that
has been formatted in Windows.
• Format the media in FAT16/32.
Example 1: Prepare multiple images and project them continuously
(Slideshow)s p.32
Example 2: Select and project image files one at a time s p.31
Presentations Using Slideshow
Slideshow Basic Operations
Slideshow lets you play back and project image files stored on USB storage
devices and digital cameras.
This section explains the basic operations for Slideshow.
Although the following steps are explained based on the remote control,
you can perform the same operations from the projector's control panel.
29
q
• You can also insert a memory card into a USB card reader and then
connect the reader to the projector. However, some commercially
available card readers may not be compatible with the projector.
• When the following screen (Select drive screen) is displayed, use the
[ ][ ] buttons to select the drive you want to use, and then press
the [Enter] button.
Starting and closing Slideshow
Starting Slideshow
Procedure
A Change the projected image to USB.
s p.21
• To display the Select drive screen, position the cursor on Select
drive at the top of the file list screen, and then press the [Enter]
button.
B Connect the USB storage device or digital camera to the
projector.
s p.34
Slideshow starts and the file list screen is displayed.
Slideshow basic operations
The following describes the procedures for playing and projecting images
using Slideshow.
Exiting Slideshow
Procedure
Procedure
To close Slideshow, disconnect the USB device from the USB(TypeA)
port on the projector. For a digital camera, hard disk, or other
equipment, turn off the power of the equipment and then
disconnect the equipment.
A [Use the [
][
][ ][
on the target file or folder.
] buttons to position the cursor
Presentations Using Slideshow
30
When a folder is selected, the files in the selected folder are displayed.
Select Back to Top on the screen that opened and press the [Enter]
button to return to the previous screen.
Rotating images
You can rotate the played images in JPEG format in 90˚ increments. The
rotating function is also available during the Slideshow.
Rotate JPEG images in the following way.
Procedure
A
Cursor
• JPEG files are displayed as thumbnails (file content is displayed as
small images).
• Depending on the JPEG file, a thumbnail may not be displayed.
In this case, a file icon is displayed.
A Play images in JPEG format, or run Slideshow.
To play images in JPEG format s p.31
To run Slideshow s p.32
B When a JPEG image is displayed, press the [
the [
q
If all files and folders cannot be displayed at the same time in the
current screen, press the [Page] (Down) button on the remote control
or position the cursor on Next page at the bottom of the screen and
press the [Enter] button.
To return to the previous screen, press the [Page] (Up) button on the
remote control or position the cursor on Previous page at the top of
the screen and press the [Enter] button.
B Press the [Enter] button.
The selected image is displayed.
] button.
] button or
Presentations Using Slideshow
31
Projecting images
Procedure
A Start Slideshow. s p.29
The file list screen is displayed.
B [Use the [
][
][ ][ ] buttons to position the cursor
on the image file to be projected.
Projecting Image Files
Image files on USB storage and image files on a digital camera can be
projected using Slideshow in either of the following two ways.
• Projecting selected image files
This is a function for projecting the content of a single file.
• Projecting all image files in a folder in sequence (Slideshow)
This is a function for projecting the content of files in a folder in
order, one file at a time.
Attention
Do not disconnect the USB storage device while it is being accessed.Slideshow
may not operate correctly.
Although the following steps are explained based on the remote control,
you can perform the same operations from the projector's control panel.
A
Image file
C Press the [Enter] button.
The image starts to play back.
Presentations Using Slideshow
32
Procedure
A Start Slideshow. s p.29
The file list screen is displayed.
B [Use the [
][
][ ][ ] buttons to position the cursor
on the folder to be played by Slideshow and press the [Enter]
button.
C Select Slideshow from the the bottom of the file list screen,
D Press the [Esc] button to return to the file list screen.
Projecting all image files in a folder in sequence (Slideshow)
You can project the image files in a folder in sequence, one at a time. This
function is called Slideshow. Use the following procedure to run
Slideshow.
q
To change files automatically when you run Slideshow, set Screen
switching time from Option in Slideshow to anything other than No.
The default setting is 3 seconds. s "Image File Display Settings and
Slideshow Operation Settings" p.33
and then press the [Enter] button.
Slideshow starts, and the image files in the folder are automatically
projected in sequence, one at a time.
When the last file is projected, the file list is displayed again
automatically. If you set Continuous Play to On from the Option
screen, projection starts again from the beginning when it reaches the
end. s "Image File Display Settings and Slideshow Operation
Settings" p.33
You can proceed to the next screen, return to the previous screen, or
stop playback while projecting a Slideshow.
q
If Screen switching time on the Option screen is set to No, files do
not change automatically when you select Play Slideshow. Press the
[Enter] button or the [Page] (Down) button on the remote control to
project the next file.
Presentations Using Slideshow
33
Image File Display Settings and Slideshow
Operation Settings
You can set the file display order and Slideshow operations on the Option
screen.
Although the following steps are explained based on the remote control,
you can perform the same operations from the projector's control panel.
Procedure
A Use the [
][
][ ][ ] buttons to position the cursor
on the folder for which you want to set display conditions and
press the [Esc] button. Select "Option" from the sub-menu that
is displayed, and then press the [Enter] button.
B When the following Option screen is displayed, set each of the
items.
Position the cursor on the setting of the item you want to change and
press the [Enter] button to enable the setting.
The following table shows the details of each item.
Display order
You can set the order of the files to be displayed. You can
select sorting of the files into either Name order or Date
order.
Continuous
Play
Set whether to repeat the Slideshow.
Screen switching time
You can set the time for a single file to be displayed in Play
Slideshow. You can set a time between No (0) and 60
Seconds. When you set No, auto play is disabled.
C [Use the [
][
][ ][ ] buttons to position the cursor
on "OK" and press the [Enter] button.
The settings are applied.
If you do not want to apply the settings, position the cursor on
Cancel and press the [Enter] button.
Connecting External Equipment
34
Connecting and Removing USB Devices
USB memories and USB compatible digital cameras, hard disk drives, and
the optional Document Camera can be connected to the projector. Image
files on a connected digital camera or JPEG files on a connected USB
storage device can be played back as a Slideshow. s "Presentations Using
Slideshow" p.28
When the optional Document Camera is connected, images from the
Document Camera will be projected.
Connecting USB devices
This section describes how to connect USB devices, using the optional
Document Camera as an example. Connect the Document Camera to the
projector using the USB cable supplied with the Document Camera. When
the Document Camera is connected to the projector during projection,
press the [USB] button on the remote control or the [Source Search] button
on the control panel to switch to images from the Document Camera.
s p.21
A To Document Camera USB port
B USB cable
C USB(TypeA) port
Attention
• If you use a USB hub, operation may not be performed correctly. Connect a
digital camera or USB storage device directly to the projector.
• When connecting and using a USB-compatible hard disk, make sure you
connect the AC adaptor supplied with the hard disk.
• Connect a digital camera or hard disk to the projector using the USB cable
supplied with or specified for use with the equipment.
Removing USB devices
After projection is finished, use the following procedure to remove the USB
device from the projector.
Connecting External Equipment
Procedure
Disconnect the optional Document Camera from the projector's
USB(TypeA) port.
For digital cameras, hard disks, and so on, turn off the power to the device
and then remove.
Connecting an External Monitor
You can display computer images input from Computer1 input port on an
external monitor and the screen connected to the projector at the same
time. This means that you can check projected images on an external
monitor when giving presentations even if you cannot see the screen.
Connect using the cable supplied with the external monitor.
A To Monitor port
B Cable supplied with monitor
35
C To Monitor Output (Monitor Out) Port
q
• You cannot display component video signals or images from
equipment connected to the Video input port or S-Video input port
on an external monitor.
• Setting gauges for functions such as Keystone, Configuration Menu,
or Help screens are not output to the external monitor.
Connecting External Equipment
Connecting External Speakers
You can connect external speakers with built-in amplifiers to the projector's
Audio Output (Audio out) port to enjoy better sound quality. Connect with
a commercially available audio cable (such as pin plug W 3.5 mm stereo
mini plug). Use an audio cable compatible with the connector on the
external speakers.
36
Connecting a microphone
You can output microphone audio from the projector's speaker by
connecting a microphone to the projector's Microphone (Mic) input port.
The projector does not support plug-in-power.
A To Microphone (Mic) input port
A To external audio equipment
B Audio cable (commercially available)
C To Audio Output (Audio Out) port
q
• When the audio cable jack is inserted into the Audio Output (Audio
Out) port, audio stops being output from the projector's built-in
speakers and switches to external output.
• When using a commercially available 2RCA(L/R)/stereo mini-pin
audio cable, make sure it is labeled "No resistance".
Connecting a LAN Cable
Connect with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
A To LAN port
B LAN cable (commercially available)
C To LAN port
Attention
To prevent malfunctions, use a category 5 shielded LAN cable.
37
Installing the Wireless LAN Unit
38
Install the optional wireless LAN unit in the projector. s "Optional
Accessories and Consumables" p.117
Procedure
A Open the air filter cover.
Slide the air filter cover open/close lever horizontally to open the air
filter cover.
C Secure the Wireless LAN unit using the screw included to avoid
losing the unit.
A Screw hole to fix wireless LAN unit
B Install the Wireless LAN unit.
Functions for Enhancing Projection
Selecting the Projection Quality (Selecting Color
Mode)
39
Procedure
Remote Control
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode
Application
Dynamic
Ideal for use in a bright room. This is the brightest mode,
and reproduces shadow tones well.
Presentation
Ideal for making presentations using color materials in a
bright room.
Theatre
Ideal for watching films in a dark room. Gives images a
natural tone.
Photo
(When inputting computer image signals or the input
source is USB or LAN)
Ideal for projecting still pictures, such as photos, in a
bright room. The images are vivid and brought into
contrast.
Sports
(When Component Video, S-Video, or composite video
images are input)
Ideal for watching TV programmes in a bright room.
The images are vivid and brought to life.
sRGB g
Ideal for images that conform to the sRGB color
standard.
Blackboard
Even if you are projecting onto a Blackboard
(greenboard), this setting gives your images a natural
tint, just like when projecting onto a screen.
Whiteboard
Ideal for making presentations using a whiteboard.
Each time you press the button, the Color Mode name is displayed on the
screen and the Color Mode changes.
If you press the button while the Color Mode name is displayed on the
screen, it changes to the next Color Mode.
q
The color mode can also be set from Color Mode in the Image menu
from the Configuration Menu. s p.74
Functions for Enhancing Projection
40
Setting the Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
Procedure
Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to turn off screen images so that the
audience's attention is focused on what you are saying, or when you do not
want the audience to see operations such as changing files.
A Press the [Menu] button and select Auto Iris from the Image
menu of the Configuration Menu. s "Using the Configuration
Menu"
Using Remote Control
Using Control panel
Procedure
Remote Control
B Select "On".
The setting is stored for each Color Mode.
C Press the [Menu] button to close the Configuration Menu.
q
Auto Iris can only be set when the Color Mode is set to Dynamic or
Theatre.
Each time you press the button, A/V Mute turns on or off.
q
• If you use this function when projecting moving images, the images
and sound continue to be played back by the source, and you
cannot return to the point where A/V Mute was activated.
• You can choose to display Black, Blue, or Logo as the A/V Mute
display using the Extended - Display - A/V Mute setting from the
configuration menu. s p.78
• Microphone audio is also output when A/V Mute is turned on.
Functions for Enhancing Projection
Freezing the Image (Freeze)
When the moving image on the screen is frozen, the image continues to
project, so you can project a moving image one frame at a time like a still
photo. Also, you can perform operations such as changing between files
during presentations from a computer without projecting any images if the
freeze function is activated beforehand.
41
Changing the Aspect Ratio
Change the Aspect Ratiog when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the Aspect Ratio when
projecting computer images at full size.
The changing methods and the types of Aspect ratio are as follows.
Procedure
Changing methods
Remote Control
Procedure
Remote Control
Each time you press the button, Freeze turns on or off.
q
• Audio does not stop.
• For moving images, the images continue to play back while the
screen is frozen, so it is not possible to resume projection from the
point where the screen was frozen.
• If the [Freeze] button is pressed while the Configuration Menu or
Help screen is displayed, the menu or Help screen that is displayed
is closed.
• Freeze still works while E-Zoom is being used.
Each time you press the button, the Aspect name is displayed on the screen
and the Aspect changes.
q
The aspect ratio can also be set from Aspect in the Signal menu from
the Configuration Menu. s p.75
Functions for Enhancing Projection
Changing the aspect ratio for video equipment images
EB-465i/460
Each time you press the button, the aspect ratio changes between 4:3 and
16:9.
EB-455Wi/450W/440W
Each time the button is pressed, the aspect ratio changes in the order of
Normal, 16:9, Full, Zoom, and Native.
A Normal
B 16:9
42
C Full
D Zoom
E Native
Functions for Enhancing Projection
43
Changing the aspect ratio for computer images (EB-465i/460)
You can change the aspect ratio as follows.
Set Values
Operation
Projection example
Normal
Projects to the full projection size retaining the Aspect of the
input image.
4:3
Projects to the full projection size at an Aspect of 4:3. This is When a 1280x1024 signal is input
ideal for when you want to project images at an Aspect of 5:4
(1280 x 1024) to the full projection size.
16:9
Projects at a 16:9 Aspect. This is ideal for projecting at full
screen size when using a 16:9 screen.
q
When a 1280x1024 signal is input
If parts of a projected image are missing and not all of the image can be projected, set Resolution from the Configuration Menu to Wide or Normal according to
your computer's panel size. s p.75
Functions for Enhancing Projection
44
Changing the aspect ratio for computer images (EB-455Wi/450W/440W)
You can change the aspect ratio as follows. EB-455Wi/450W/440W offers a panel resolution of WXGA so the projection size is 1280x800 dots (aspect ratio of
16:10). When projecting onto a 16:9 screen, set the the aspect ratio to 16:9.
Set Values
Operation
Projection example
Normal
Projects to the full projection size retaining the Aspect of the When a 1024x768 signal is input
input image.
16:9
Projects to the full projection size at an Aspect of 16:9.
When a 1024x768 signal is input
Full
Project at full size.
When a 1024x768 signal is input
Zoom
Projects the input image at the lateral direction aspect size as When a 1024x768 signal is input
it is. Parts that extend beyond the projection size are not
projected.
Functions for Enhancing Projection
Set Values
Native
q
45
Operation
Projection example
Projects at the resolution of the input image size to the center When an 800x600 signal is input
of the screen. This is ideal for projecting clear images.
If the image resolution exceeds 1280x800, the edges of the
image are not projected.
When an 1400x1050 signal is input
If parts of a projected image are missing and not all of the image can be projected, set Resolution from the Configuration Menu to Wide or Normal according to
your computer's panel size. s p.75
Functions for Enhancing Projection
Using the Pointer to Highlight Sections (Pointer)
46
B Move the Pointer icon (
Remote Control
This allows you to move a Pointer icon on the projected image, and helps
you draw attention to the area you are talking about.
Procedure
A Display the Pointer.
Remote Control
Each time you press the button, the pointer appears or disappears.
).
When you press two of the [
][
][ ][ ] buttons that
are adjacent to each other at the same time, the pointer can be
moved diagonally instead of up, down, left, or right.
q
You can choose from three different kinds of pointer icon shape (
, or
) from the Settings Menu - Pointer Shape in the
Configuration Menu.
s p.76
,
Functions for Enhancing Projection
Enlarging Part of the Image (E-Zoom)
47
B Move the cross (
) to the part of the image that you want to
enlarge.
This is useful when you want to expand images to see them in greater
detail, such as graphs and tables.
Procedure
A Start E-Zoom.
Remote Control
Remote Control
When you press two of the [
][
][ ][ ] buttons that
are adjacent to each other at the same time, the pointer can be
moved diagonally instead of up, down, left, or right.
C Enlarge.
Remote Control
Each time the button is pressed, the area is expanded. You can
expand quickly by holding the button down.
You can reduce the enlarged image by pressing the [x] button.
Press the [Esc] button to cancel.
Functions for Enhancing Projection
q
48
• The enlargement ratio appears on the screen. The selected area can
be enlarged to between 1 to 4 times in 25 incremental steps.
• Press the [
][
][
][
] buttons to scroll the image.
• If E-Zoom is selected, Progressive and Noise Reduction are
cancelled.
Operating the Mouse Pointer by Remote Control
(Wireless Mouse)
To activate the Wireless Mouse function, set USB Type B to Wireless
Mouse from the Extended menu in the Configuration Menu.
The following shows the default settings for USB Type B.
• EB-465i/455Wi: Off
• EB-460/450W: USB Display
Change the setting beforehand. s p.78
By connecting a computer's USB port and the USB(TypeB) on the side of
the projector with the supplied USB cable, you can use the projector's
remote control like a wireless mouse to control the computer's mouse
pointer.
OS
Windows
Mac OS
Windows 98
Windows 98SE
Windows Me
Windows 2000
Windows XP
Windows Vista
Windows 7
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
Functions for Enhancing Projection
q
49
• The Wireless Mouse function can only be used when the input
source is Computer1/Computer2 and the input signal is RGB.
• You may not be able to use the Wireless Mouse function in some
versions of Windows and Mac OS.
• Some computer settings may have to be changed in order for the
mouse function to be used. See the documentation supplied with the
computer.
Once the connection has been made, the mouse pointer can be operated as
follows.
Moving the mouse pointer
[
], [
], [
], [
] buttons:
Moves the mouse pointer.
Mouse clicks
[Enter] button: Left click. Press quickly twice
to double-click.
[Esc] button: Right click.
Drag and drop
While holding down the [Enter] button,
press the [
[
], [
], [
], or
] button.
Release the [Enter] button to drop at the
desired location.
Page Up/Down
[Up] button: Moves to the previous page.
[Down] button: Moves to the next page.
q
• When you press two of the [
][
][
][
] buttons
that are adjacent to each other at the same time, the pointer can be
moved diagonally instead of up, down, left, or right.
• If the mouse button settings are set to reverse on the computer, the
operation of the Remote Control buttons will also be reversed.
• The Wireless Mouse function cannot be used while the following
functions are being used.
- While the Configuration Menu is being displayed
- While a Help menu is being displayed
- While the E-Zoom function is being used
- While a User's Logo is being captured
- While a User Pattern is being captured
- While the Pointer function is being used
- While the Volume is being adjusted
- While USB Display is being operated
- While a Pattern is being displayed
- While Color Mode is being set
- While the Source name is being displayed
Security Functions
The projector has the following enhanced security functions.
• Password Protect
You can limit who can use the projector.
• Control Panel Lock
You can prevent people changing the settings on the projector without
permission. s p.52
• Anti-Theft Lock
The projector is equipped with various types of anti-theft security devices.
s p.53
Managing Users (Password Protect)
When Password Protect is activated, people who do not know the Password
cannot use the projector to project images even if the projector power is on.
Furthermore, the user's logo that is displayed when you turn on the
projector cannot be changed. This acts as an anti-theft device as the
projector cannot be used even if it is stolen. At the time of purchase,
Password Protect is not activated.
Type of Password Protect
The following three kinds of Password Protect settings can be made
according to how the projector is being used.
1. Power On Protect
When Power On Protect is set to On, you are requested to enter the preset password
the first time you turn on the power after connecting the projector to an electrical
outlet with the power cable (this also applies to Direct Power On). If the correct
Password is not entered, projection does not start.
50
2. User's Logo Protect
Even if someone tries to change the User's Logo set by the owner of the projector, it
cannot be changed. When User's Logo Protect is set to On, the following setting
changes for the User's Logo are prohibited.
• Capturing a User's Logo
• Settings for Display Background, Startup Screen, and A/V Mute
from Display in the Configuration Menu.
3. Network Protect
When Network Protect is set to On, changing the settings for Network in the
Configuration Menu is prohibited.
Setting Password Protect
Use the following procedure to set Password Protect.
Procedure
A During projection, hold down the [Freeze] button for about
five seconds.
The Password Protect setting menu is displayed.
Remote Control
Security Functions
q
51
Remote Control
• If Password Protect is already activated, you are requested to enter
the Password.
If the Password is entered correctly, the Password Protect setting
menu is displayed. s "Entering the Password" p.51
• When the password is set, stick the supplied password protect sticker
in a visible position on the projector as a further theft deterrent.
B Turn on Power On Protect.
(1)
(2)
(3)
Select Power On Protect, and then press the [Enter] button.
Select On, and then press the [Enter] button.
Press the [Esc] button.
C Turn on User's Logo Protect.
(1)
(2)
(3)
Select User's Logo Protect, and then press the [Enter] button.
Select On, and then press the [Enter] button.
Press the [Esc] button.
D Turn on Network Protect.
(1)
(2)
(3)
Select Network Protect, and then press the [Enter] button.
Select On, and then press the [Enter] button.
Press the [Esc] button.
E Set the Password.
(1)
(2)
(3)
Select Password, and then press the [Enter] button.
When the message "Change the password?" is displayed, select Yes and
then press the [Enter] button. The default setting for the Password is
"0000". Change this to your own desired Password. If you select No, the
screen displayed in step 1 is displayed again.
While holding down the [Num] button, enter a four digit number using the
numeric buttons. The number entered is displayed as "* * * *". When you
enter the fourth digit, the confirmation screen is displayed.
(4)
Re-enter the Password.
Password accepted. is displayed.
If you enter the Password incorrectly, a message is displayed prompting
you to re-enter the password.
Entering the Password
When the Password entry screen is displayed, enter the Password using the
numeric buttons on the Remote Control.
Procedure
While holding down the [Num] button, enter the Password by
pressing the numeric buttons.
When you enter the correct Password, projection begins.
Security Functions
Attention
• If an incorrect password is entered three times in succession, the message "The
projector's operation will be locked." for about five minutes, and then the
projector switches to standby mode. If this happens, disconnect the power plug
from the electrical outlet and then reinsert it and turn the projector's power
back on. The projector displays the Password entry screen again so that you
can enter the correct Password.
• If you have forgotten the password, make a note of the "Request Code: xxxxx"
number that appears on the screen and contact the nearest address provided in
the Support and Service Guide. s Epson Projector Contact List
• If you continue to repeat the above operation and enter the wrong Password
thirty times in succession, the following message is displayed and the projector
does not accept any more password entries. The projector's operation will be
locked. Contact Epson as described in your documentation. s Epson
Projector Contact List
52
Procedure
A During projection, press the [Menu] button and select Control
Panel Lock from the Settings Menu in the Configuration Menu.
s "Using the Configuration Menu" p.73
Using Remote Control
Using Control panel
Restricting Operation (Control Panel Lock)
Perform one of the following to lock the operation buttons on the Control
panel.
• Full Lock
All of the buttons on the Control panel are locked. You cannot perform
any operations from the Control panel, including turning the power on or
off.
• Partial Lock
All of the buttons on the Control panel, except for the [t] button, are
locked.
This is useful at events or shows when you want to deactivate all buttons
and only project, or at schools when you want to limit button operation.
The projector can still be operated using the Remote Control.
B Select either Full Lock or Partial Lock.
C Select Yes when the confirmation message is displayed.
The Control panel buttons are locked according to the setting you
chose.
Security Functions
q
You can release the Control panel lock by one of the following two
methods.
• Use the remote control to set Control Panel Lock to Off from
Settings in the Configuration Menu.
• Press and hold down the [Enter] button on the Control panel for
about seven seconds, a message is displayed and the lock is released.
53
Anti-Theft Lock
As the projector is often setup on ceiling mounts and left in rooms
unattended, the projector includes the following security devices to prevent
someone from taking the projector.
• Security slot
The Security slot is compatible with the Microsaver Security System
manufactured by Kensington. You can find details about the Microsaver
Security System on the Kensington homepage http://
www.kensington.com/.
• Security cable installation point
A commercially available theft-prevention wire lock can be passed
through the installation point to secure the projector to a pillar and so
on.
Installing the wire lock
Pass an anti-theft wire lock through the installation point.
See the documentation supplied with the wire lock for locking instructions.
Easy Interactive Function (EB-465i/455Wi only)
54
Summary of Easy Interactive Function
• By simply connecting a computer to the projector, you can control the
computer on the projection screen and give an effective, interactive
presentation or lesson.
• Using the dedicated Easy Interactive Pen
The supplied pen (Easy Interactive Pen) can be used like a mouse, which
allows you to treat the projection surface in the same way as a computer
screen. You can use an application with a drawing function to draw
diagrams and write text on the projection surface.
q
Download Easy Interactive Tools, a dedicated application for the
drawing function, from the Epson Web site.
s http://www.epson.com
• Position alignment (Calibration)
This operation is for aligning the pen position on the projection surface
and the mouse position on the computer screen in order to use the Easy
Interactive Pen. Touching the reference points displayed on the projection
surface with the Easy Interactive Pen enables operation on the projection
surface using the Easy Interactive Pen.
Easy Interactive Function (EB-465i/455Wi only)
Attention
Easy Interactive Function operates by infrared communication. Note the
following important points when using this function.
• Make sure there is no strong light or sunlight shining on the Easy Interactive
Function receiver or the projection screen.
• If there is any dust stuck to the Easy Interactive Function receiver, it could
•
•
•
•
•
interfere with infrared communications and you may not be able to use the
function normally.
Do not put paint or any stickers on the cover of the Easy Interactive Function
receiver.
Install the projector so that the Easy Interactive Function receiver is not too
close to fluorescent lights.
The Easy Interactive Pen may malfunction if infrared remote controls or
infrared microphones are used in the same location.
The Easy Interactive Function may be interrupted by electromagnetic
interference from nearby equipment (such as electric motors, transformers).
The Easy Interactive Pen is not waterproof. Do not use it with wet hands, or in
locations where it may get wet.
55
Operation Steps
First time Easy Interactive Function is used
s p.56
It is only necessary to install the driver and perform calibration the first
time.
1.
Connect the computer cable and USB cable, and turn on the computer.
2.
Install Easy Interactive Driver.
3
Turn on the projector and start Easy Interactive Driver.
4.
Perform position alignment (calibration).
After calibration, Easy Interactive Function is ready for use.
From the second time
s p.60
You can use Easy Interactive Function by just starting Easy Interactive
Driver.
You will need to perform calibration again when you use a computer with a
different resolution or change the projection area.
System Requirements
For Windows
Easy Interactive Function (EB-465i/455Wi only)
Windows 2000 Service Pack 4
The following 32 bit operating systems:
Windows XP Service Pack 2 or later
Windows Vista*
Windows Vista Service Pack 1 or later*
Windows 7
The following 64 bit operating systems:
Windows 7
OS
*
CPU
Pentium III 1.2GHz or faster
Recommended: Pentium M 1.6GHz or faster
Amount of Memory
256MB or more
Hard Disk
Free Space
100MB or more
Display
Resolution greater than XGA (1024x768)
56
First time Easy Interactive Function is used
Procedure
A Connect the projector and computer with the computer cable
and USB cable.
B Turn on the computer.
C Install Easy Interactive Driver.
q
Check the following points before starting installation.
• Install the software as a user with administrator authority.
• Close all running applications and then start the installation.
Except for the Starter Edition
For Windows
For Mac OS
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
OS
CPU
Power PC G3 900MHz or faster
Recommended: Intel Core Duo 1.5GHz or faster
Amount of Memory
256MB or more
Hard Disk
Free Space
100MB or more
Display
Resolution greater than XGA (1024x768)
(1)
(2)
(3)
(4)
Some settings on the computer may need to be changed to use the
mouse function. See the documentation supplied with the computer.
Follow the on-screen instructions to install.
If the Register to Startup and Launch Easy Interactive Driver options are
displayed, select them both.
Click Finish to close the installer and automatically start Easy Interactive
Driver.
For Mac OS
(1)
q
Insert the "EPSON Projector Software for Easy Interactive Function
Ver.x.xx" CD-ROM into your computer.
The setup program starts automatically.
Select the language you want to use on the language selection screen, and
click Next >.
(2)
Insert the "EPSON Projector Software for Easy Interactive Function
Ver.x.xx" CD-ROM into your computer.
Double-click EIDriverVxxx_Setup in the EPSON window.
Easy Interactive Function (EB-465i/455Wi only)
(3)
(4)
q
Follow the on-screen instructions to install.
If the Start up and Launch Easy Interactive Driver options are displayed,
select them both.
* These two settings are not displayed in Mac OS 10.3.
When "Finished" is displayed, the installer closes and Easy Interactive
Driver starts automatically.
• After installation is complete, if a screen is displayed prompting you
to reboot your computer, follow the on-screen instructions to reboot.
• When the setup program does not start automatically (Windows
only)
Select Start - Run to open the Run dialog box, type the letter for
your CD-ROM drive followed by :\EIDriverVxxx_Setup.exe, and
then click OK.
• When Easy Interactive Driver does not start automatically
57
D Turn the projector on.
Check the following when images are not projected.
• Change the projector's input source to Computer1 or Computer2.
s p.21
• Change the output destination for the video signals on the
computer. sComputer's documentation
Images are projected shortly after you make the changes.
Example of Changing Output
Epson
Macintosh
NEC
Panasonic
SOTEC
Make mirroring settings
or perform display
detection. Depending on
the OS, the output can be
changed with
.
HP
For Windows
Select Start - Programs (or All Programs) - EPSON Projector Easy Interactive Driver Ver.x.xx.
For Mac OS
Double-click the Applications folder of the hard disk volume on
which Easy Interactive Driver is installed, and then double-click the
Easy Interactive Driver icon.
• When uninstalling Easy Interactive Driver
Toshiba
Lenovo/IBM
SONY
DELL
Fujitsu
For Windows
Select Start - Settings - Control Panel - Add-Remove Programs or
Add or Remove Programs and then remove Easy Interactive
Driver.
For Mac OS
Run EIDriverVxxx_Uninstaller in the the hard disk volume on
which Easy Interactive Driver is installed.
Computer
only
On some computers, the
display state changes as
follows each time you press
the keys for changing the
output.
Screen only
Both
Easy Interactive Function (EB-465i/455Wi only)
E The connection status is indicated by an icon.
58
F Start calibration.
For Windows
Check that the icon is indicating the connected status.
The icon is displayed in the notification area of the taskbar.
Perform calibration with either Calibrate (Normal) (number of
points: 25) or Calibrate (Advanced) (number of points: 49).
<Connected>
<Not Connected>
We recommend using Calibrate (Normal). Select Calibrate
(Advanced) if you need higher accuracy.
For Windows
Click the icon in the notification area of the taskbar, and select an
item from the menu that is displayed.
For Mac OS
The icon is displayed in the Dock.
<Connected>
<Not Connected>
For Mac OS
q
• It may take a few seconds for the icon to indicate the connection
status.
Click the icon in the Dock or Calibrate on the menu bar, and select
an item from the menu that is displayed.
• If the not connected icon is displayed, check whether or not the
projector and computer are connected with the USB cable correctly.
You may be able to resolve the problem by disconnecting and then
reconnecting the USB cable.
For details on calibration, see s "Calibration" p.61.
G Click "OK" when the calibration start message is displayed.
Easy Interactive Function (EB-465i/455Wi only)
H A dot flashes in the top left of the screen.
If you touch the center of the dot with the tip of the Easy Interactive
Pen, the dot changes from flashing to lit.
59
I The dots are displayed in order from the top left to bottom
right of the screen.
Repeat step 9 until all of the dots are lit.
Using Easy Interactive Pens p.18
q
• Make sure you touch the center of the dot. The dot changes from
flashing to lit even if you touch an area outside of the circle. Since
calibration is performed using the position touched, positioning may
be offset if you touch an area other than the center of the circle.
q
It may take a few seconds for the Easy Interactive Driver icon to
change to connected status after all of the dots are lit.
J After calibration, you can use the Easy Interactive Pen to
perform the same operations as a mouse on the projection
surface.
K Use the following procedure to end the Easy Interactive
Function.
For Windows
• If you make a mistake during the operation, press the "Esc" key to
cancel calibration, and then try again.
Click the icon in the notification area of the taskbar, and select
Exit.
Easy Interactive Function (EB-465i/455Wi only)
60
B Easy Interactive Driver starts automatically.
Use the following procedure to start Easy Interactive Driver if it does
not start.
For Windows
For Mac OS
Click the icon in the Dock or Easy Interactive Driver on the menu
bar, and select Quit from the menu that is displayed.
Select Start - Programs (or All Programs) - EPSON Projector Easy Interactive Driver Ver.x.xx.
For Mac OS
Double-click the Applications folder of the hard disk volume on
which Easy Interactive Driver is installed, and then double-click the
Easy Interactive Driver icon.
C The connection status is indicated by an icon.
For Windows
The icon is displayed in the notification area of the taskbar.
<Connected>
Using Easy Interactive Function from the Second
Time
<Not Connected>
For Mac OS
The icon is displayed in the Dock.
Procedure
<Connected>
<Not Connected>
A Turn on the projector and computer.
Check that the projector and computer are connected with the
computer cable and USB cable.
After the projector and computer are connected, you can use Easy
Interactive Pen to perform the same operations as a mouse on the
projection surface.
Easy Interactive Function (EB-465i/455Wi only)
q
• It may take a few seconds for the icon to indicate the connection
status.
• If the not connected icon is displayed, check whether or not the
projector and computer are connected with the USB cable correctly.
You may be able to resolve the problem by disconnecting and then
reconnecting the USB cable.
D Use the following procedure to end the Easy Interactive
Function.
For Windows
Click the icon in the notification area of the taskbar, and select
Exit.
61
Calibration
To use Easy Interactive Function, you need to make sure you perform
calibration to align the pen position on the screen and the mouse position
on the projection screen with the Easy Interactive Pen.
There are two calibration modes: Calibrate (Normal) and Calibrate
(Advanced).
Specify 25 points with Calibrate (Normal), and 49 points with Calibrate
(Advanced).
Make sure you perform calibration the first time you use Easy Interactive
Function. After that, you only need to perform calibration if the usage
environment changes, for example if the connected computer is changed or
the projection area is changed.
Cases in which calibration is required
For Mac OS
Click the icon in the Dock or Easy Interactive Driver on the menu
bar, and select Quit from the menu that is displayed.
In the following cases, the positioning of the Easy Interactive Pen on the
projection surface and the mouse on the computer may be offset. When
position offset becomes a problem, perform calibration again.
• When the computer's resolution is changed.
• When a computer with a resolution that differs from the last time
calibration was performed is connected.
• When Keystone is performed from the Settings Menu in the
Configuration Menu.
• When Zoom is changed from the Settings Menu in the Configuration
Menu.
• When Auto Setup is performed from the Signal menu in the
Configuration Menu.
• When Resolution is changed from the Signal menu in the Configuration
Menu.
• When Tracking is changed from the Signal menu in the Configuration
Menu.
Easy Interactive Function (EB-465i/455Wi only)
• When
Menu.
• When
Menu.
• When
Menu.
• When
• When
Sync. is changed from the Signal menu in the Configuration
62
System Requirements
OS
Position is changed from the Signal menu in the Configuration
Aspect is changed from the Signal menu in the Configuration
input detection is performed automatically.
position offset becomes a problem for other reasons.
*
q
• If you set Projection to Rear/Ceiling from the Extended menu in the
Configuration menu, Easy Interactive Function cannot be used
because the pen position and mouse position will not match.
• The pen position and mouse position will not match while E-Zoom
is being used.
• When you use Easy Interactive Function while images are projected
with EasyMP Network Projection (input source: LAN), set USB
Type B to Wireless Mouse or Off from the Extended menu in the
Configuration Menu.
The following 32 bit operating systems:
Windows Vista*
Windows Vista Service Pack 1 or later*
Windows 7
The following 64 bit operating systems:
Windows 7
Except for the Starter Edition
Checking availability
When Easy Interactive Driver is installed, check that the tablet function is
enabled.
For Windows 7
Click Control Panel - System and Security and then System.
If Pen and Single Touch Input Available is displayed in Pen and Touch,
the tablet function is available.
Tablet Function
If Easy Interactive Driver is installed, the tablet function for Windows Vista
or Windows 7 is enabled. When Office 2003/2007/2010 is installed on the
computer you are using, the Ink function in Office allows you to use Easy
Interactive Pen as a mouse.
For Windows Vista
Click Control Panel and then System.
If Available is displayed in Tablet PC functionality, the tablet function is
available.
Replacing the Batteries for the Easy Interactive
Pen
When the button is pressed, the indicator for the Easy Interactive Pen turns
on. If it does not turn on, the batteries are out of power and need to be
replaced. Have two AAA size alkaline batteries ready. For details on other
Easy Interactive Function (EB-465i/455Wi only)
batteries that can be used, contact your local dealer or the nearest address
provided in the Support and Service Guide.
s Epson Projector Contact List
Attention
Make sure you read the separate Safety Instructions before handling the
batteries.s Safety Instructions
Procedure
A Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
B Replace the old batteries with new batteries.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to ensure
the batteries are inserted correctly.
63
C Reattach the battery cover.
Press the battery cover until it clicks into place.
Changing Settings Using a Web Browser (Web Control)
You can make Configuration Menu settings and control the projector by
using the Web browser of a computer that is connected to the projector via
a network. By using this function you can perform setup and control
operations remotely. In addition, since you can use the computer's
keyboard, entering characters required for the setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If you are
using Mac OS, you can also use Safari.
q
If you set Extended - Standby Setup - Standby Mode to
Communication On from the projector's Configuration menu, you
can use the Web browser to make settings and perform control even if
the projector is in a standby state (when the power is off).
Some items cannot be set with a Web browser (but can be from the
Configuration Menu) and some items can only be set with a Web browser.
Items in the Configuration Menu that cannot be set with a Web browser
All items in the projector's Configuration Menu can be set except for the
following.
• Settings Menu - Pointer Shape
• Settings Menu - Pattern
• Settings Menu - User Button
• Extended Menu - Saving User's Logo
• Extended Menu - Language
• Extended Menu - Operation - High Altitude Mode
• Reset Menu - Reset All, and Reset Lamp Hours
• Password Protect Menu
The items available in each menu are the same as the Configuration Menu
of the projector.
s "List of Functions" p.74
Items that can only be set with a Web browser
The following items can only be set with a Web browser. They cannot be
set from the Configuration Menu.
64
• Network settings- Others - SNMP - Community Name
• Network settings- Basic - Monitor Password
Displaying Web Control
Use the following procedure to display Web Control.
q
If your Web browser is set to connect via a proxy server, Web Control
cannot be displayed. To display Web Control, you need to make
settings so that a proxy server is not used for a connection.
Entering the IP address of the projector
When you are using Advanced Connection Mode, you can open Web
Control by specifying the IP address of the projector as follows.
Procedure
A Start the Web browser on the computer.
B Enter the IP address of the projector in the address input box
of the Web browser, and press the Enter key on the computer's
keyboard.
Web Control is displayed.
When Web Control Password is set from the Network menu in the
Configuration menu, a screen for entering the password is displayed.
Enter the characters set for the Web Control Password.
Changing Settings Using a Web Browser (Web Control)
65
Displaying Web Remote
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
Procedure
A Display Web Control.
B Click Web Remote.
Name
C The Web Remote screen is displayed.
Function
A t button
Turns the projector power On or Off.
s Quick Start Guide
B [Computer] button
Each time you press the button, input changes between
images from the Computer1 input port and the
Computer2 input port. s p.22
C [Video] button
Each time you press the button, input changes between
images from the Video input port and the S-Video input
port. s p.22
D [Freeze] button
Pauses or resumes image playback. s p.41
E [A/V Mute] button
Temporarily turns the images and audio on or off.
s p.40
F [Page] buttons
([Up]) ([Down])
When you are using the Wireless Mouse function or the
input source is projecting a file from an application that
supports page up/down via LAN, you can move the page
up and down by pressing these buttons. s p.48, EasyMP
Network Projection Operation Guide
G [Source Search]
button
Changes to images from the next device inputting an
image signal. s p.21
Changing Settings Using a Web Browser (Web Control)
Name
Function
H [LAN] button
Changes to the images projected with EasyMP Network
Projection. When you are projecting via Quick Wireless
Connection using the optional Quick Wireless
Connection USB Key, pressing this button changes to that
image. s p.22
I [USB] button
Each time you press the button, input changes between
images from the equipment connected to USB Display
and USB(TypeA) port. s p.22
J [Volume] buttons (a)
(b)
(a) Decreases the Volume.
(b) Increases the Volume.
s Quick Start Guide
Caution
Do not start at high volume.
A sudden increase in volume may cause loss of hearing. Always lower the volume before turning the
power off, and gradually increase the volume after
turning the power on.
66
Using the Mail Notification Function to Report Problems
By setting the Mail Notification function from the projector's Configuration
Menu, notification messages will be sent to the preset email addresses when
a problem or warning occurs with a projector. This will enable the operator
to be notified of problems with projectors even at locations away from the
projectors.
s "Network Menu" p.80, "Mail menu" p.87
q
• Up to a maximum of three notification destinations (Addresses) can
be recorded, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• Monitoring is possible if Extended - Standby Setup - Standby
Mode is set to Network On from the projector's Configuration
menu, even if the projector is in standby mode (when the power is
off).
67
Management Using SNMP
If you set SNMP in the Configuration Menu of the projector, the set
computer is notified of the error state when an error or warning occurs
with the projector. This also enables you to know about errors when
centrally managing projectors at a distance.
s "Network Menu" p.80, "Mail menu" p.87
q
• SNMP should be managed by a network administrator or someone
who is familiar with the network.
• The SNMP function to monitor projectors requires SNMP Manager
to be installed on the computer.
• The managing function using SNMP cannot be used via a Wireless
LAN in Quick Connection Mode.
• Up to two destination IP addresses can be saved.
68
Saving a User's Logo
69
You can save the image that is currently being projected as a User's Logo.
q
When a User's Logo is saved, the previous User's Logo is erased.
q
Procedure
A Project the image you want to save as the User's Logo, and
then press the [Menu] button.
Using Remote Control
• When User's Logo Protect from Password Protect is set to On, a
message is displayed and the User's Logo cannot be changed. You
can make changes after setting User's Logo Protect to Off.
s p.50
• If User's Logo is selected when one of the Keystone, E-Zoom,
Aspect, Progressive, and Zoom Adjustment functions is being used,
the function currently being used is cancelled temporarily.
C When the message "Choose this image as the User's Logo?" is
displayed, select Yes.
Using Control panel
q
When you press the [Enter] button on the remote control or the
control panel, the screen size may change depending on the signal to
match the actual resolution of the image signal.
D Move the box to select the part of the image to use as the
User's Logo.
B Select User's Logo from the Extended menu in the
Configuration Menu. s "Using the Configuration Menu"
p.73
Check the buttons you can use and the operations they perform in
the guide under the menu.
Saving a User's Logo
70
G When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
Using Remote Control
q
Using Control panel
You can save at a size of 400x300 dots.
E When the message "Select this image?" is displayed, select
Yes.
F Select the zoom factor from the zoom setting screen.
q
• Once a User's Logo has been saved, the logo cannot be returned to
the factory default.
• Saving the user's logo may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.
Saving User Pattern
71
You can save the image that is currently being projected as a User Pattern.
q
When a User Pattern is saved, the previous User Pattern is erased.
Procedure
A Project the image you want to use as the User Pattern, and
then press the [Menu] button.
Using Remote Control
Using Control panel
q
If User Pattern is selected when one of the Keystone, E-Zoom, Aspect,
Progressive, and Zoom Adjustment functions is being used, the
function currently being used is cancelled temporarily.
D When "Do you want to use the currently projected image as
the User Pattern?" is displayed, select "Yes".
E When you press the [Enter] button, the message "Do you save
B Select Pattern from the Settings Menu in the Configuration
Menu. s "Using the Configuration Menu" p.73
this image as the User Pattern?" is displayed. Then, select
"Yes".
The image is saved. After the image has been saved, the message "The
User Pattern setting is complete." is displayed.
q
C Select User Pattern.
• Once a User Pattern has been saved, User Pattern cannot be
returned to the factory default.
• Saving the User Pattern may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.
Configuration Menu
This chapter explains how to use the Configuration Menu and its functions.
Using the Configuration Menu
Selecting from the top menu
73
Selecting from the sub menu
Changing the selected item
Exit
List of Functions
74
Image Menu
Items that can be set vary depending on the image signal and Source currently being projected as shown in the following screen shots. Setting details are saved
for each image signal and Source.
Depending on the model used, some input sources are not supported. s p.21
Component Videog/Composite videog/S-Video g
Computer Signal/USB/USB Display/LAN
Sub-menu
Function
Color Mode
You can select the quality of the image to suit your surroundings. s p.39
Brightness
You can adjust the image Brightness.
Contrast g
You can adjust the difference between light and shade in the images.
Color Saturation
You can adjust the Color Saturation for the images.
Tint
(Adjustment is only possible when NTSC signals are being input if you use composite video/S-Video.)
You can adjust the image Tint.
Sharpness
You can adjust the image sharpness.
Color Adjustment
You can make adjustments by choosing one of the following.(This item cannot be selected if the adjustment value of Color Mode is set to sRGBg from
the Image menu.)
Abs. Color Temp.: You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. When a high value is selected the
image becomes tinged with blue, when a low value is selected the image becomes tinged with red.
Red, Green, Blue: You can adjust the saturation of each color individually.
Auto Iris
(This item is only displayed if the adjustment value of Color Mode is set to Dynamic or Theatre from the Image menu.)
Set whether or not (On/Off) to adjust the iris to obtain the optimal light for the images. s p.40
List of Functions
75
Sub-menu
Function
You can reset all adjustment values of the Image menu to their default settings. To return all menu items to their default settings, see s p.91
Reset
Signal Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each
image signal.
You cannot make settings in the Signal menu when the input source is LAN.
Computer image
Sub-menu
Component Video g
Composite videog/S-Video g
Function
Auto Setup
You can select whether or not (On/Off) to automatically adjust the image to the optimal state when the input signal changes. s p.100
Resolution
When set to Auto, the resolution of the input signal is identified automatically. If parts of a projected image are missing when this is set to Auto, set Wide
for a wide screen or Normal for a 4:3 or 5:4 screen in accordance with the connected computer.
Tracking g
You can adjust computer images when vertical stripes appear in the images. s p.100
Sync. g
You can adjust computer images when flickering, fuzziness, or interference appear in the images. s p.100
Position
You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.
Progressive
(Component Video can only be set when 480i/576i/1080i signals are being input)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
Video: This is ideal for viewing general video images.
Film/Auto: This is ideal for movie films, computer graphics, and animation.
List of Functions
76
Sub-menu
Function
Noise Reduction
Smoothes out rough images. There are two modes. Select your favorite setting. Set this to Off when viewing image sources in which noise is very low,
such as DVDs.
Input Signal
You can select an input signal from Computer1/2 input port.
If this is set to Auto, the input signal is set automatically depending on the connected equipment.
If colors do not appear correctly when this is set to Auto, select the appropriate signal depending on the connected equipment.
Video Signal
You can select the input signal from the Video input port. If this is set to Auto, video signals are recognized automatically. If interference appears in the
image or a problem occurs such as no image is being projected when set to Auto, select the appropriate signal depending on the connected equipment.
Aspect
You can set the Aspect Ratiog for projected images. s p.41
Reset
You can reset all adjustment values in the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s p.91
Settings Menu
Sub-menu
Function
Keystone
You can correct keystone distortion in the vertical direction.s Quick Start Guide
Zoom
You can adjust Tele/Wide.
Control Panel Lock
You can use this to restrict operation of the projector's Control panel. s p.52
Pointer Shape
You can select the shape of the pointer.s p.46
Pointer 1:
Pointer 2:
Pointer 3:
List of Functions
77
Sub-menu
Function
Power Consumption
You can set the Lamp brightness to one of two settings.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected,
power consumption during projection and the lamp life change as follows, and fan rotation noise is reduced. Electrical consumption: about 25%
decrease, lamp life: about 1.4 times longer
When the projection mode is Front/Pointing Down, this is automatically set to ECO (EB-465i/455Wi only).
Volume
You can adjust the Volume. Setting details are saved for each image signal.
Mic Input Level
Adjust this if the microphone input level is low and the microphone audio output from the projector's speaker is difficult to hear, or if the input level is
too high, resulting in a crackling sound in audio from the microphone. When Mic Input Level is turned down to 0, no microphone audio is output from
the speaker.
Remote Receiver
You can limit the reception of the operation signal from the Remote Control.
When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can make settings to
deactivate the remote receiver you do not want to use or that is experiencing interference.
User Button
You can select the item from the Configuration menu with the remote control's User Button. By pressing the User Button the assigned menu item
selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following items to the User
Button.
Power Consumption, Info, Progressive,Test Pattern, Resolution, Mic Input Level, and Pattern Display
Pattern
Pattern Display: Display a pattern.
Pattern Type: You can select from Patterns 1 to 4 or User Pattern. Patterns 1 to 4 display projection lines such as ruled lines or a grid.
Pattern 1:
Pattern 2:
Pattern 3:
Pattern 4:
User Pattern: Captures a user pattern.s p.71
Test Pattern: When the projector is set up, a test pattern is displayed so that you can adjust the projection status without connecting equipment. While
the Test Pattern is displayed, zoom, focus adjustments, and Keystone correction can be performed. To cancel the Test Pattern, press the [Esc] button on
the Remote Control or the Control panel.
Attention
If a pattern is displayed for a long time, a residual image may be visible in projected images.
Reset
You can reset all adjustment values in the Settings Menu to their default settings, except for User Button.
To return all menu items to their default settings, see s p.91
List of Functions
78
Extended Menu
Submenu
Function
Display
You can make settings related to the projector's display.
Messages: You can set whether or not (On/Off) to display the Source name when you change the Source, the Color Mode name when you
change the Color Mode, a message when no image signal is input, and so on.
Display Background*1: You can set the screen status for when no image signal is available to Black, Blue, or Logo.
Startup Screen*1: You can set whether or not (On/Off) to display the startup screen (the image projected when starting the projector) at
startup.
A/V Mute*1: You can set the screen displayed during A/V Mute to Black, Blue, or Logo.
User's Logo *1
You can change the User's Logo that is displayed as a background during Display Background, A/V Mute, and so on. s p.69
Projection
Select from one of the following projection methods depending on how the projector is installed. s p.20
Front/Ceiling, Rear/Ceiling, and Front/Pointing Down
Operation
Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
When this is set to On and the power cable is plugged in, note that the projector turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried
out.
Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a range of 1 to
30 minutes in 1 minute increments.
High Altitude Mode: Set to On when using the projector above an altitude of 1500 m.
Audio Input: When set to Auto, audio is automatically output from any audio input source.
When set to Audio1, Audio2, or Audio (L/R), audio is only output from the selected audio input source.
List of Functions
79
Submenu
Function
Standby Setup
Standby Mode: You can use the following functions even when the projector is in standby mode if this is set to Communication
On.
• Monitor and control the status of the projector over the network.
You can use SNMPg or the dedicated application software "EasyMP Monitor" to monitor and control the status of the projector over the
network.
• Output audio from the projector's speaker when a microphone is connected to the Mic input port.*2
(Only when Standby Microphone is set to On.)
• Output audio from the projector's speaker for equipment connected to the audio input port.*2
(Only when Standby Audio is set to On.)
Standby Microphone: (This can only be set if Standby Mode is set to Communication On.)
Set whether mic input is enabled (On) or disabled (Off).
Standby Audio: (This can only be set if Standby Mode is set to Communication On.)
Set whether audio input is enabled (On) or disabled (Off).
USB Type B
Set
s
Set
Set
Language
You can set the Language to use for displaying messages and menus.
Reset
You can return the adjustment values for Display*1 and Operation*3 in the Extended menu to their default settings.
To return all menu items to their default settings, see s p.91
this to USB Display when the projector and a computer are connected with a USB cable and computer images are projected.
Quick Start Guide
this to Wireless Mouse when the mouse pointer is to be operated by the remote control. s p.48
this to Off when using only Easy Interactive Function (EB-465i/455Wi only). s p.54
*1 When User's Logo Protect is set to On in Password Protect, settings related to user's logo cannot be changed. You can make changes after setting User's Logo Protect to
Off. s p.50
*2 Audio is not output while Power On Protect from Password Protect is set to On.
*3 Except for "High Altitude Mode".
List of Functions
80
Network Menu
When Network Protect in Password Protect is set to On, a message is displayed and the settings cannot be changed. You can make changes after setting
Network Protect to Off. s p.50
Sub-menu
Function
Network Information
You can confirm the setting status for each network as follows.
Network Configuration
The following menus are available for setting Network items.
Basic Menu, Wireless LAN Menu, Security Menu, Wired LAN Menu, Mail Menu, Others Menu, Reset Menu, Setup complete Menu
q
By using the Web browser of a computer connected to the projector on a network, you can set the functions and control the projector. This function is called Web
Control. You can easily enter text using a keyboard to make settings for Web Control such as Security settings. s p.64
List of Functions
81
Notes on using the Network menu
Select items from the top menu and sub menus and change selected items
in the same way as in the Configuration Menu.
When done, make sure you go to the Setup complete menu, and select one
of Yes, No, or Cancel. When you select Yes or No, you return to the
Configuration Menu.
Each time the [CAPS] key is selected, it sets and changes between upper
case and lower case letters.
Each time the [SYM1/2] key is selected, it sets and changes the symbol keys
for the section enclosed by the frame.
Yes: Saves the settings and closes the Network menu.
No: Does not save the settings and closes the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require you to enter alphanumeric
characters when you set them. In this case, the following software keyboard
is displayed. Use the [
][
][ ][ ] buttons on the Remote
Control or the [w], [v], [a], and [b] buttons on the Control panel to
move the cursor to the desired key, and then press the [Enter] button to
enter the alphanumeric. Enter figures by holding down the [Num] button
on the Remote Control, and pressing the numeric buttons. After inputting,
press [Finish] on the keyboard to confirm your input. Press [Cancel] on the
keyboard to cancel your input.
List of Functions
82
Basic Menu
Sub-menu
Function
Projector Name
Displays the projector name used to identify the projector when connected to a Network.
When editing, you can enter up to 16 single-byte alphanumeric characters.
PJLink Password
Set a Password to use when you access the projector using compatible PJLink software. s p.124
You can enter up to 32 single-byte alphanumeric characters.
Web Control Password
Set a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters.
Web Control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a
Network. s p.64
Projector keyword
When this is set to On, you are requested to enter the Keyword when you attempt to connect the projector and a computer via a network. As a result,
EasyMP Network Projection can prevent presentations from being interrupted by unscheduled connections from a computer during projection.
Normally, set this to On. s EasyMP Network Projection Operation Guide "Connecting to a Projector on a Network and Projecting"
List of Functions
83
Wireless LAN Menu
Settings are enabled when the optional Wireless LAN unit is installed.
Sub-menu
Function
Wireless LAN Power
Set this to On when connecting the projector and a computer via a wireless LAN. If you do not want to connect via a wireless LAN, set this to Off to
prevent unauthorized access by others. This is set to On by default.
Connection Mode
Use EasyMP Network Projection to set the mode, how the computer connect to the projector.
Set this to Quick Connection Mode when you want to make a simple wireless connection. Set this to Advanced Connection Mode when you want to
connect to a network system via an access point.
Wireless LAN system
Sets the Wireless LAN system.
SSIDg
Enter an SSID. When an SSID is provided for the wireless LAN system in which the projector will participate, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
IP Settings
You can make settings related to the following addresses.
DHCPg: Set whether or not (On/Off) to use DHCP. If this is set to On, you cannot set any more addresses.
IP Addressg: You can input the IP address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the
following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Maskg: You can input the subnet mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Addressg: You can input the IP address of the gateway for the projector. You can input a number from 0 to 255 in each field of the address.
However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
List of Functions
84
Sub-menu
Function
SSID Display
To prevent the SSID from being displayed on Network Info in the Network menu and on the LAN Standby screen, set this to Off.
IP Address Display
To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.
Security menu
Settings are enabled when the optional Wireless LAN unit is installed.
Sub-menu
Security
Function
Select one type of security from the following items.
When setting security, follow the instructions from the administrator of the network system you are about to access. When using Advanced Connection
Mode, be sure to make security settings.
WEP: An encryption key (WEP key) is used to encrypt data.
This mechanism prevents communication unless the encryption keys for the access point and the projector match.
WPA/WPA2: This is an encryption standard that improves security, which is considered a weak point of WEP. Although there are multiple kinds of
WPA encryption methods, this projector uses "TKIP" and "AES".
WPA also includes user authentication functions.WPA authentication provides two methods: using an authentication server, or authenticating
between a computer and an access point without a using server. This projector supports the latter method, without a server.
List of Functions
85
When WEP is selected
You can set the following items.
Sub-menu
Function
WEP encryption
You can set the encryption method for WEP encryption.
128bit: Uses 128 (104) bit encoding
64bit: Uses 64 (40) bit encoding
Format
You can set the input method for the WEP encryption key.
ASCII: Input in text.
HEX: Input in HEX (hexadecimal).
Key ID
You can select the WEP encryption ID key.
Encryption key 1
Encryption key 2
Encryption key 3
Encryption key 4
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the
network in which the projector participates. The type of character and the number that can be entered differ according to the WEP encryption and
Format settings.
If the number of characters you enter is shorter than the required character length, or if the number of characters you enter is longer than the required
character length, it does not connect.
128bit - ASCII: Single-byte alphanumeric characters, 13 characters.
64bit - ASCII: Single-byte alphanumeric characters, 5 characters.
128bit - HEX: 0 to 9 and A to F, 26 characters
64bit - HEX: 0 to 9 and A to F, 10 characters
Authentication Type
Set the WEP authentication type.
Open: Uses open system authentication.
Shared: Uses shared key authentication.
When WPA-PSK (TKIP) or WPA2-PSK (AES) is selected
You can set the following items.
Sub-menu
PSK
Function
You can enter a PreSharedKey (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When the PreSharedKey
is entered and the [Enter] button is pressed, the value is set and displayed as an asterisk (*).
You cannot enter more than 32 characters in the Configuration Menu. If you want to set more than 32 characters, make the setting from Web Control.
s p.64
List of Functions
86
Wired LAN menu
Sub-menu
Function
IP Settings
You can make settings related to the following addresses.
DHCPg: Select whether or not (On/Off) to use DHCP. If this is set to On, you cannot set any more addresses.
IP Addressg: You can input the IP address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the
following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Maskg: You can input the subnet mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the
following Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Addressg: You can input the IP address of the gateway for the projector. You can input a number from 0 to 255 in each field of the address.
However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
IP Address Display
To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.
List of Functions
87
Mail menu
When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent Mail,
see "Reading Error Notification Mail" s p.107
Sub-menu
Function
Mail Notification
You can set whether or not (On/Off) to be notified by mail.
SMTP Server
You can input the IP addressg of the SMTP Server used by the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Port Number
You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535.
Address 1 Setting
Address 2 Setting
Address 3 Setting
Enter the Email Address and the contents of the email to receive notification when an error or warning occurs in the projector. You can enter up to 32
characters for the mail address. You can select multiple problems or warnings to be notified about by Mail. You can also change each Email Address.
q
Monitoring is possible if Extended - Standby Setup - Standby Mode is set to Communication On from the projector's Configuration menu, even if the projector
is in standby mode (when the power is off).
List of Functions
88
Others Menu
Sub-menu
Function
SNMP
Set whether or not (On/Off) to use SNMP.
Trap IP Address 1
Trap IP Address 2
You can register up to two IP addresses for the SNMPg trap notification destination.
You can input a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer.SNMP should be managed by a network
administrator.
Priority gateway
For the priority gateway, select either wireless or wired.
AMX Device Discovery g
When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery. Set this to Off if you are not
connected to an environment controlled with a controller from AMX or AMX Device Discovery.
List of Functions
89
Reset Menu
Resets all of the network settings.
Sub-menu
Reset network settings.
Function
To reset all of the Network settings, select Yes.
After you reset all of the settings, the Basic menu is displayed.
List of Functions
90
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image signal
and Source currently being projected as shown in the following screen shots. Depending on the model used, some input sources are not supported.
s p.21
Computer Signal/Component Video g/USB/USB
Display
Composite videog/S-Videog
Sub-menu
LAN
Function
Lamp Hours
You can display the cumulative lamp operating time*.
When it reaches the lamp warning time, the characters are displayed in yellow.
Source
You can display the Source name for the connected equipment currently being projected.
Input Signal
You can display the settings of Input Signal in the Signal menu depending on the Source.
Resolution
You can display the resolution.
Video Signal
You can display the settings of Video Signal in the Signal menu.
Refresh Rateg
You can display the refresh rate.
Sync Info
You can display the image signal Information.
It may be needed if service is required.
Status
This information is about errors that have occurred with the projector.
It may be needed if service is required.
Serial Number
Displays the projector's serial number.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed in 1 hour steps as "10H", "11H", and so on.
List of Functions
91
Reset Menu
Sub-menu
Function
Reset All
You can reset all items in the Configuration Menu to their default settings.
The following items are not reset to their defaults: Input Signal, User's Logo, all items in the Network menu, Lamp Hours, and Language.
Reset Lamp Hours
You can clear the cumulative lamp hours, and return it to "0H". Reset this when you replace the lamp.
Troubleshooting
This chapter explains how to identify problems and what to do if a problem is found.
Using the Help
93
If a problem occurs with the projector, the Help screen is displayed to assist
you by pressing the Help button. You can solve problems by answering the
questions.
C Confirm the selection.
Using Remote Control
Using Control panel
Procedure
A Press the [Help] button.
The Help screen is displayed.
Using Remote Control
Using Control panel
Questions and solutions are displayed as shown on the screen below.
Press the [Help] button to exit the Help.
B Select a menu item.
q
Using Remote Control
Using Control panel
If the Help function does not provide a solution to the problem, see
"Problem Solving" p.94.
Problem Solving
If you are having a problem with the projector, first check the projector's
indicators and see "Reading the Indicators".
94
A Indicates the operating status.
If the indicators do not show clearly what the problem might be, see "When
the Indicators Provide No Help". s p.97
Standby condition
When the [t] button is
pressed in this status,
projection starts.
Preparing for network
monitoring or cool down in
progress
Buttons are disabled while
the indicator is flashing.
Warming up
Warm-up time is about 30
seconds. After warm-up is
complete, the indicator stops
flashing.
Projecting
Reading the Indicators
The projector is provided with the following three indicators that indicate
the status of the projector.
B Indicates the internal temperature status.
C Indicates the lamp status.
See the following table for the status of indicators and how to resolve the
problems.
If all indicators are off, the power cable is not connected correctly or the
power is not being supplied normally.
Sometimes, when the power cable is unplugged, the [t] indicator remains
lit for a short period, but this is not a fault.
Problem Solving
95
t indicator is lit or flashing red
: Lit
Status
Cause
: Flashing
: Off
Remedy or Status
Internal Error
Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
address provided in the Support and Service Guide. s Epson Projector Contact List
Fan Error
Sensor Error
Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
address provided in the Support and Service Guide. s Epson Projector Contact List
High Temp Error
(overheating)
The lamp turns off automatically and projection stops. Wait for approximately five minutes. After approximately five minutes
the projector switches to standby mode, so check the following two points.
• Check that the air filter and air exhaust vent are not blocked, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it.s p.109, p.115
If the error continues after checking the points above, stop using the projector, disconnect the power cable from the electrical
outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector
Contact List
When using the projector at an altitude of 1500 m or more, set High Altitude Mode to On. s p.78
Lamp Error
Lamp Failure
Check the following two points.
• Take out the lamp and check whether it is cracked. s p.112
• Clean the air filter. s p.109
If it is not cracked: Reinstall the lamp and turn on the power.
If the error continues: Replace the lamp with a new one and then turn on the power.
If the error continues: Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local
dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List
If it is cracked: Replace it with a new lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful
to avoid pieces of broken glass (you cannot continue projecting until the lamp is replaced). s Epson Projector Contact List
When using the projector at an altitude of 1500 m or more, set High Altitude Mode to On. s p.78
Auto Iris Error
Power Err. (Ballast)
Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
address provided in the Support and Service Guide. s Epson Projector Contact List
Problem Solving
96
m o indicator is flashing or lit orange
: Lit
Status
q
Cause
: Flashing
: Off
: Varies according to the projector status
Remedy or Status
High Temp Warning
(This is not an abnormality. However, if the temperature rises too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are not blocked, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it. s p.109, p.115
Replace Lamp
Replace it with a new lamp. s p.112
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may blow increases. Replace
it with a new lamp as soon as possible.
• If the projected images are abnormal even though the indicators are not indicating an error, see "When the Indicators Provide No Help" p.97.
• If the error is not indicated in this table, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the
nearest address provided in the Support and Service Guide. s Epson Projector Contact List
Problem Solving
When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
97
Problems relating to monitoring and control
"Mail is not received even if an error occurs
with the projector" s p.103
Problems relating to images
• "No images appear" s p.98
Projection does not start, the projection area is completely black, the
projection area is completely blue, and so on.
• "Moving images are not displayed" s p.98
Moving images played back from a computer appear black and the images
are not projected.
Problems relating to Easy Interactive Function
• "The message "Hardware device not found." is displayed." s p.103
• "Easy Interactive Pen does not work" s p.104
• "Flashing dots do not appear even if calibration is started" s p.104
• "Projection stops automatically" s p.98
• "The dots do not change from flashing to always lit." s p.104
• "The message "Not supported" is displayed." s p.99
• "The dots change from flashing to always lit automatically" s p.104
• "The message "No Signal" is displayed." s p.99
• "Images are fuzzy or out of focus" s p.99
• "Interference or distortion appear in images" s p.100
Problems such as interference, distortion, or black & white checked patterns
appear.
• "The image is truncated (large) or small, or the aspect is not suitable" s p.100
Only part of the image is displayed, or the height and width ratios of the
image are not correct, and so on.
• "Image colors are not right" s p.101
The whole image appears purplish or greenish, images are black and white,
colors appear dull, and so on. (Computer monitors and LCD screens have
different color reproduction performance, so the colors in images projected
by the projector and the colors appearing on the monitor may not always
match, but this is not a sign of a problem.)
• "Images appear dark" s p.101
Problems when projection starts
• "The projector does not turn on" s p.102
Other problems
• "No sound can be heard or the sound is
faint" s p.105
• "No sound can be heard from the
microphone" s p.105
• "The remote control does not
work" s p.105
• "I want to change the language for messages
and menus" s p.106
Problem Solving
98
Problems relating to images
No images appear
Check
Remedy
Did you press the [t] button?
Press the [t] button to turn the power on.
Are all of the indicators off?
The power cable is not connected correctly or power is not being supplied.
Check the breaker and so on to ensure power is being supplied.
If the lamp cover or the lamp are not installed correctly, the lamp will not turn on.
Check that the lamp cover and lamp are installed properly. s p.112
Is A/V Mute active?
Press the [A/V Mute] button on the remote control to cancel A/V Mute. s p.40
Are the Configuration Menu settings correct?
Reset all of the settings. s Reset Menu - Reset All p.91
Is the projected image completely black?
Some input images, such as screen savers, may be completely black.
Only when projecting computer images
Is the image signal format setting correct?
Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.75
Only when projecting images from a video source
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and the
monitor?
Remedy
Change the image signal to external output only. s See the documentation supplied with the computer or contact the
maker of the computer.
Only when projecting images from a laptop computer or a computer
with a built-in LCD screen
Projection stops automatically
Check
Is Sleep Mode set to On?
Remedy
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off. s Extended
Menu - Operation - Sleep Mode p.78
Problem Solving
99
The message "Not supported" is displayed.
Check
Is the image signal format setting correct?
Remedy
Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.75
Only when projecting images from a video source
Do the image signal resolution and refresh rate correspond to the
mode?
See the documentation supplied with the computer for how to change the image signal resolution and refresh rate output
from the computer. s "List of Supported Resolutions" p.120
Only when projecting computer images
The message "No Signal" is displayed.
Check
Remedy
Are the cables connected correctly?
Check that all the cables required for projection are securely connected. s Quick Start Guide
Is the correct input port selected?
Change the image by pressing the [Source Search] button on the remote control or the control panel. s p.21
Is the power of the connected computer or video equipment turned Turn the power on for the equipment.
on?
Are the image signals being output to the projector?
Only when projecting images from a laptop computer or a computer
with a built-in LCD screen
If the image signals are only being output to the computer's LCD monitor or accessory monitor, change the output so
that the image signals are also output externally. For some computer models, when the image signals are output
externally, they no longer appear on the LCD monitor or accessory monitor. sComputer's documentation, under a
title such as "External output" or "Connecting an external monitor"
If the connection is made while the power of the projector or computer is already turned on, the function [Fn] key that
changes the computer's image signal to external output may not work. Turn the power for the computer and the
projector off and then back on again.
Images are fuzzy or out of focus
Check
Remedy
Is the focus adjusted correctly?
Adjust the focus with the focus lever. s Quick Start Guide
Is the projector at the correct distance?
Is it projecting outside of the recommended projection distance range?
Setup within the recommended range. s p.118
Is the Keystone adjustment value large?
Lower the projection angle to reduce the amount of keystone correction. s Quick Start Guide
Problem Solving
100
Check
Remedy
Has condensation formed on the lens?
If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature
changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the
projector up in the room about one hour before it is used. If condensation forms on the lens, turn the projector off and
wait for the condensation to disappear.
Is a wide-panel computer image being projected?
Change the setting according to the signal for the connected equipment. s Signal menu - Resolution p.75
Only when projecting computer images
Is the correct resolution selected?
Only when projecting computer images
Set the computer so that the signals being output are compatible with the projector.
s "List of Supported Resolutions" p.120 s Computer's documentation
Interference or distortion appear in images
Check
Is the image signal format setting correct?
Remedy
Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.75
Only when projecting images from a video source
Are the cables connected correctly?
Check that all the cables required for projection are securely connected. s Quick Start Guide
Is an extension cable being used?
If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
check if the cables you are using may be causing the problem.
Is the correct resolution selected?
Set the computer so that the signals being output are compatible with the projector.
s "List of Supported Resolutions" p.120 s Computer's documentation
Only when projecting computer images
Are the "Sync.g" and "Trackingg" settings adjusted correctly?
Only when projecting computer images
Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
adjustment. If the images are not adjusted correctly after using automatic adjustment, you can make the adjustments
using Sync. and Tracking from the Configuration Menu. s Signal Menu - Tracking, Sync. p.75
The image is truncated (large) or small, or the aspect is not suitable
Check
Is a wide-panel computer image being projected?
Remedy
Change the setting according to the signal for the connected equipment. s Signal menu - Resolution p.75
Only when projecting computer images
Is the image still enlarged by E-Zoom?
Press the [Esc] button on the remote control to cancel E-Zoom. s p.47
Problem Solving
101
Check
Remedy
Is the display position adjusted correctly?
Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
adjustment while a computer image is being projected. If the images are not adjusted correctly even after performing
automatic adjustment, you can also make adjustments using Position from the Configuration Menu.
Apart from computer image signals, you can adjust other signals while projecting by adjusting Position from the
Configuration Menu. s Signal Menu - Position p.75
Is the computer set for dual display?
If dual display is activated in "Display Properties" from the computer's Control panel, only approximately half of the
image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display
setting. s Computer's video driver documentation
Only when projecting computer images
Is the correct resolution selected?
Only when projecting computer images
Set the computer so that the signals being output are compatible with the projector.
s "List of Supported Resolutions" p.120 s Computer's documentation
Image colors are not right
Check
Remedy
Do the input signal settings match the signals from the connected
device?
Change the following settings according to the signal for the connected equipment.
When the image is from equipment connected to the Computer input port s Signal menu - Input Signal p.75
When the image is from equipment connected to the Video or S-Video input port s Signal menu - Video Signal
p.75
Is the image Brightness adjusted correctly?
Adjust Brightness in the Configuration Menu. s Image menu - Brightness p.74
Are the cables connected correctly?
Check that all the cables required for projection are securely connected. s Quick Start Guide
Is the contrastg adjusted correctly?
Adjust Contrast from the Configuration Menu. s Image Menu - Contrast p.74
Is color adjustment set to an appropriate value?
Adjust the Color Adjustment setting from the Configuration Menu. s Image Menu - Color Adjustment p.74
Are the color saturation and tint adjusted correctly?
Adjust the Color Saturation and Tint settings from the Configuration Menu. s Image Menu - Color Saturation, Tint
p.74
Only when projecting images from a video source
Images appear dark
Check
Is the image brightness set correctly?
Remedy
Adjust Brightness and Power Consumption from the Configuration Menu.
s Image Menu - Brightness p.74 s Settings Menu - Power Consumption p.76
Problem Solving
102
Check
Remedy
Is the contrastg adjusted correctly?
Adjust Contrast from the Configuration Menu.
s Image Menu - Contrast p.74
Is it time to replace the lamp?
When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
lamp with a new one. s p.112
Problems when projection starts
The projector does not turn on
Check
Remedy
Did you press the [t] button?
Press the [t] button to turn the power on.
Are all of the indicators off?
The power cable is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cable. s Quick Start Guide
Check the breaker and so on to ensure power is being supplied.
If the lamp cover or the lamp are not installed correctly, the lamp will not turn on.
Check that the lamp cover and lamp are installed properly. s p.112
Do the indicators turn on and off when the power cable is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List
Is Control Panel Lock set to Full Lock?
Press the [t] button on the remote control. If you do not want to use Control Panel Lock, change the setting to Off.
s Settings Menu - Control Panel Lock p.52
Is the remote receiver set correctly?
Check the Remote Receiver from the Configuration Menu. s Settings Menu - Remote Receiver p.76
Problem Solving
103
Problems relating to monitoring and control
Mail is not received even if an error occurs with the projector
Check
Is the wireless LAN unit installed?
Remedy
Check that the optional wireless LAN unit is installed in the projector properly.
For wireless LAN
Is the network cable connected correctly?
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected properly.
For wired LAN
Are the network connection settings correct?
Check the projector's network settings. s p.80
Is Standby Mode set to Communication On?
To use Mail Notification when the projector is in a standby state, set Standby Mode to Communication On from the
Configuration Menu. s Extended menu - Standby Setup - Standby Mode p.78
Did a fatal error occur and the projector come to a sudden stop?
If the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the error state cannot be resolved, contact your local dealer or the nearest address
provided in the Support and Service Guide. s Epson Projector Contact List
Is power being supplied to the projector?
Check that your electrical outlet or power source is functioning correctly.
Is Mail Notification set correctly from the Configuration Menu?
Error notification mail is sent in accordance with the setting of the Mail menu from the Configuration Menu. Check if it
is set correctly.
s Network menu - Mail menu p.87
Problems relating to Easy Interactive Function
The message "Hardware device not found." is displayed.
Check
The projector and computer are not connected correctly.
Remedy
Check the USB cable connections. You may be able to resolve the problem by disconnecting and then reconnecting the
USB cable.
Connect the power cable of the computer to an electrical outlet.
If you are using a notebook computer when the battery power is
running low, the USB port may stop working and you might not be
able to use USB devices.
Problem Solving
104
Easy Interactive Pen does not work
Check
Remedy
An object is blocking the path for sending the signal from the Easy Move the object. Also, make sure you are not blocking the signal path when you stand in front of the projection surface.
Interactive Pen to the projector.
There is insufficient battery power.
Replace the batteries.
The surroundings are too bright.
Make sure there is no strong light shining on the projection surface or the Easy Interactive Function receiver.
The projector and computer are not connected.
Check that the projector and computer are connected correctly.
Flashing dots do not appear even if calibration is started
Check
Remedy
The computer screen is being redisplayed.
End all applications such as Flash animations that redisplay the screen and then restart Easy Interactive Function.
The dots are not displayed if the projector is not detected by the
computer.
Check that the projector and computer are connected correctly and then restart Easy Interactive Function.
The dots do not change from flashing to always lit.
Check
Remedy
The projector surface information cannot be received accurately
because there is another light source nearby.
Move the light source away from the projector or change the installation location of the projector.
The projector surface information cannot be received accurately if
the projector position is too close to the projection surface.
Check the installation position of the projector.
The dots change from flashing to always lit automatically
Check
Remedy
The Easy Interactive Pen has been disabled because the surrounding Change the installation position of the projector or turn off the light source.
light source state is unstable.
Problem Solving
105
The tablet function does not operate normally
Check
Remedy
If other tablet device drivers are installed, the tablet function may not When Easy Interactive Driver is installed, the Easy Interactive Virtual Tablet Driver that allows you to use the tablet
operate normally.
function is automatically installed. If other tablet device drivers are already installed and the tablet function does not
operate normally, uninstall Easy Interactive Virtual Tablet Driver.
To leave Easy Interactive Driver installed and only uninstall Easy Interactive Virtual Tablet Driver, go to Start - Control
Panel - Programs - Uninstall a program and remove Easy Interactive Virtual Tablet Driver.
Other problems
No sound can be heard or the sound is faint
Check
Remedy
Is the audio source connected correctly?
Disconnect the cable from the Audio port, and then reconnect the cable.
Is the volume adjusted to the minimum setting?
Adjust the volume so that sound can be heard. s p.76 s Quick Start Guide
Is A/V Mute active?
Press the [A/V Mute] button on the remote control to cancel A/V Mute. s p.40
Is the audio cable's specification "No resistance"?
When using a commercially available audio cable, make sure it is labeled "No resistance".
No sound can be heard from the microphone
Check
Remedy
Is the microphone connected correctly?
Disconnect the cable from the Microphone (Mic) input port, and then reconnect the cable.
Is the Mic Input Volume turned down too low?
Adjust the Mic Input Volume so that sound can be heard. s Settings Menu - Mic Input Level p.76
The remote control does not work
Check
Remedy
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?
Point the remote control towards the remote receiver during operation.
Operating range s Quick Start Guide
Is the remote control too far from the projector?
The operating range for the remote control is about 6 m. s Quick Start Guide
Problem Solving
106
Check
Remedy
Is direct sunlight or strong light from fluorescent lamps shining onto Set the projector up in a location where strong light does not shine onto the Remote Receiver. Or set the remote receiver
the Remote Receiver?
to Off from Remote Receiver in the configuration menu. s Settings Menu - Remote Receiver p.76
Is the remote receiver set correctly?
Check the Remote Receiver from the Configuration Menu. s Settings Menu - Remote Receiver p.76
Are the batteries dead or have the batteries been inserted in the
wrong direction?
Insert new batteries in the correct direction. s p.111
I want to change the language for messages and menus
Check
Change the language setting.
Remedy
Change the Language setting from the Configuration Menu. s p.78
Reading Error Notification Mail
107
When the mail notification function is set to On and the projector enters
an error or warning state, the following mail will be sent.
Subject: EPSON Projector
Line 1: The name of the projector where the problem occurred
Line 2: The IP Address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table shows
the details that are given in the message for each item. To deal with
problems/warnings, see "Reading the Indicators". s p.94
Message
Cause
Internal error
Internal Error
Fan related error
Fan Error
Sensor error
Sensor Error
Lamp timer failure
Lamp Failure
Lamp out
Lamp Error
Internal temperature error
High Temp Error
(Overheating)
High-speed cooling in progress
High Temp Warning
Lamp replacement notification
Replace Lamp
No-signal
No Signal
No Signal is input to the projector. Check
the connection status or check that the
power for the signal source is turned on.
Auto Iris Error
Auto Iris Error
Power Err. (Ballast)
Power Err. (Ballast)
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-): A projector problem has been dealt with
Appendix
This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Cleaning Parts
Clean the projector if it becomes dirty or if the quality of the projected
images starts to deteriorate.
Cleaning the Projector's Surface
109
Warning
Do not use sprays that contain flammable gas to remove dirt and dust from the
lens. The projector may catch fire because of the high temperature of the lamp
inside the projector.
Clean the projector's surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
Do not rub the lens with harsh materials or subject the lens to shocks, as it
can easily become damaged.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.
Cleaning the Air Filter
Clean the air filter and the air intake vent when the following message is
displayed.
Cleaning the Projection Window
Use a commercially available cloth for cleaning glasses to gently wipe off
dirt from the projection window.
The projector is overheating. Make sure nothing is blocking the air vent,
and clean or replace the air filter.
Attention
• Dust collecting on the air filter may cause the internal temperature of the
projector to rise, leading to a malfunction or early deterioration of optical
parts. If the message is displayed, clean the air filter as soon as possible.
• Do not rinse the air filter in water. Do not use detergents or solvents.
Cleaning Parts
q
• If the message is displayed frequently even after cleaning, it is time
to replace the air filter. Replace it with a new air filter.
s p.115
• It is recommended that you clean these parts at least once every
three months. Clean them more often than this if you are using the
projector in a particularly dusty environment.
110
Replacing Consumables
111
This section explains how to replace the remote control batteries, lamp, and
air filter.
Replacing the Remote Control Batteries
If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. Batteries other than AA size
manganese or alkaline batteries cannot be used.
Caution
Attention
Make sure you read the separate Safety Instructions before handling the
batteries. s Safety Instructions
Procedure
A Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
B Replace the old batteries with new batteries.
Check the positions of the (+) and (-) marks inside the battery holder to ensure
the batteries are inserted correctly.
C Reattach the battery cover.
Press the battery cover until it clicks into place.
Replacing Consumables
Replacing the Lamp
112
Attention
• The lamp replacement message is set to appear after the following time periods
Lamp replacement period
It is time to replace the lamp when:
• The message "Replace the lamp." is displayed when you start projecting.
in order to maintain the initial brightness and quality of the projected images.
s p.76
When Power Consumption is set to Normal: About 2500 hours
When Power Consumption is set to ECO: About 3500 hours (when projecting
from a ceiling), and about 2000 hours (when projecting pointing down)
(EB-465i/455Wi only).
• If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may blow increases. When the lamp replacement
message is displayed, replace the lamp with a new one as soon as possible, even
if it is still working.
• Depending on the individual characteristics of the lamp and the way it has
been used, the lamp may become darker or stop working before the message is
displayed. We recommend having a spare lamp ready in case it is needed.
A message is displayed.
• The lamp indicator flashes orange.
How to replace the Lamp
Warning
• When replacing the lamp because it has stopped working, there is a possibility
that the lamp may be cracked. If replacing the lamp of a projector which has
been installed on a wall or ceiling, you should always assume that the lamp is
broken, and you should stand to the side of the Lamp cover, not underneath it.
Also, remove the lamp cover gently. There is the risk of small pieces of glass
falling when you open the lamp cover. If this happens, see a doctor
immediately.
• Never disassemble or modify a lamp. If a modified or disassembled lamp is
installed in the projector and used, it could cause a fire, electric shock, or an
accident.
• The projected image gets darker or starts to deteriorate.
Replacing Consumables
113
Caution
Wait until the lamp has cooled down sufficiently before removing the lamp cover.
If the lamp is still hot, burns or other injuries may result. It takes approximately
one hour after the power has been turned off for the lamp to sufficiently cool
down.
Procedure
A After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cable.
C Loosen the two lamp fixing screws.
B Wait until the lamp has sufficiently cooled down, and then
remove the lamp cover at the top of the projector.
Loosen the lamp cover fixing screw with the screwdriver supplied
with the new lamp unit or a Phillips (+) screwdriver. Then slide the
lamp cover straight forward and lift to remove it.
D Remove the old lamp by pulling the handle.
If the lamp is cracked, replace it with a new lamp or contact your
local dealer for further advice. s Epson Projector Contact List
Replacing Consumables
114
E Install the new lamp.
Insert the new lamp along the guide rail in the correct direction so
that it fits in place, push down firmly at the location marked "PUSH",
and once it is fully inserted tighten the two screws. Press the
replacement lamp in by the handle until it clicks into place.
Push the replacement lamp inside the projector by the handle until it
clicks into place.
F Attach the lamp cover.
Replacing Consumables
Attention
• Install the lamp securely. If the lamp cover is removed, the power turns off
automatically as a safety precaution. If the lamp or the lamp cover is not
installed correctly, the lamp does not turn on.
• This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose of
it with normal waste.
115
How to replace the air filter
Procedure
A After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cable.
B Open the air filter cover.
Resetting the Lamp Hours
The projector records how long the lamp is on and a message and indicator
notify you when it is time to replace the lamp. After replacing the lamp,
reset the time accumulated for Lamp Hours in the Configuration Menu.
s p.91
q
Only reset Lamp Hours after the lamp has been replaced. Otherwise,
the lamp replacement period will not be indicated correctly.
Replacing the Air Filter
Air filter replacement period
It is time to replace the air filter when:
• There is a tear in the air filter.
• The message is displayed frequently even though the air filter has been
cleaned.
Slide the air filter cover open/close lever horizontally to open the air
filter cover.
Replacing Consumables
116
D Install the new air filter.
Press until it clicks into place.
C Remove the air filter.
Grip the tab in the center of the air filter, and pull the air filter
straight out.
E Close the air filter cover.
q
Dispose of used air filters properly in accordance with your local
regulations.
Material of the frame part: ABS
Material of the filter part: Polyurethane foam
Optional Accessories and Consumables
The following optional accessories and consumables are available. Please
purchase these products as and when needed. The following list of optional
accessories and consumables is current as of: 2010.01. Details of accessories
are subject to change without notice and availability may vary depending on
the country of purchase.
117
Consumables
Lamp unit ELPLP57
Use as a replacement for a used lamp. s "Replacing the Lamp" p.112
Air filter ELPAF31 (EB-465i/455Wi)
Air filter ELPAF27 (EB-460/450W)
Optional accessories
Computer cable ELPKC02
(1.8 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Computer cable ELPKC09
(3 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Computer cable ELPKC10
(20 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Component video cable ELPKC19
(3 m - for mini D-Sub 15-pin/RCA male^3)
Use to connect a component videog source.
Document Camera ELPDC06/ELPDC11
Use when projecting books, OHP documents, or slides. s "Connecting USB devices"
p.34
Wireless LAN unit ELPAP03
Use when connecting the projector to a computer wirelessly and projecting.
s "Installing the Wireless LAN Unit" p.38
Quick Wireless Connection USB Key ELPAP08
Use this key to connect to a Windows computer and project images from the computer.
However, the projector needs to be connected to a network before it can be used.
Easy Interactive Pen ELPPN02
You can use it to perform the same operations as a mouse on the projection surface.
Use as a replacement for a used air filter. s "Replacing the Air Filter" p.115
Screen Size and Projection Distance
118
To find the appropriate screen size, see the following table to setup the
projector. Values are just reference.
Unit: cm
16:9 Screen Size
Projection distance
Height from the bottom edge of the
projector to the top edge of the screen
Height from the bottom edge of the
projector to the bottom edge of the screen
Minimum (Wide) to Maximum
(Tele)
B
C
A
58"
128x72
47 - 64
23
95
65"
144x81
53 - 71
26
107
70"
155x87
57
28
116
80"
177x100
65
33
133
90"
199x112
73
38
150
93"
206x116
76
39
155
Unit: cm
16:10 Screen Size
Projection Distance of EB-465i/460
4:3 Screen Size
B
C
A
Unit: cm
Minimum (Wide) to Maximum
(Tele)
Minimum (Wide) to Maximum
(Tele)
B
C
A
63"
128x96
47 - 63
11
107
70"
142x107
52 - 71
12
119
80"
163x122
60
15
137
90"
183x137
67
17
154
102"
207x155
76
20
176
60"
129x81
47 - 64
19
100
70"
151x94
55 - 75
23
117
80"
172x108
63
27
135
90"
194x121
71
31
152
96"
207x129
76
33
162
Projection Distance of EB-455Wi/450W/440W
Unit: cm
16:10 Screen Size
Minimum (Wide) to Maximum
(Tele)
B
C
19
100
A
60"
129x81
47 - 64
Screen Size and Projection Distance
16:10 Screen Size
Minimum (Wide) to Maximum
(Tele)
119
B
C
A
70"
151x94
55 - 75
23
117
80"
172x108
63
27
135
90"
194x121
71
31
152
96"
207x129
76
33
162
Unit: cm
4:3 Screen Size
Minimum (Wide) to Maximum
(Tele)
B
C
A
53"
108x81
47 - 64
19
100
55"
112x84
49 - 66
20
104
60"
122x91
53 - 73
22
113
70"
142x107
63
27
133
80"
163x122
72
31
153
85"
173x130
76
33
163
Unit: cm
16:9 Screen Size
Minimum (Wide) to Maximum
(Tele)
B
C
A
58"
128x72
47 - 64
23
95
65"
144x81
53 - 71
26
107
70"
155x87
57
28
116
80"
177x100
65
33
133
90"
199x112
73
38
150
93"
206x116
76
39
155
List of Supported Resolutions
120
Component Video
Resolutions Supported by EB-465i/460
Computer signals (analog RGB)
Signal
Refresh Rate (Hz)
Resolution (dots)
SDTV (480i)
60
720x480
Signal
Refresh Rate (Hz)
Resolution (dots)
SDTV(576i)
50
720x576
VGA
60/72/75/85
640x480
SDTV(480p)
60
720x480
SVGA
56/60/72/75/85
800x600
SDTV(576p)
50
720x576
XGA
60/70/75/85
1024x768
HDTV(720p)
50/60
1280x720
WXGA
60
1280x768
HDTV(1080i)
50/60
1920x1080
60
1360x768
60/75/85
1280x800
WXGA+
60/75/85
1440x900
SXGA
70/75/85
1152x864
Signal
Refresh Rate (Hz)
Resolution (dots)
60/75/85
1280x1024
TV (NTSC)
60
720x480
60/75/85
1280x960
TV(PAL,SECAM)
50/60
720x576
SXGA+
60/75
1400x1050
UXGA
60
1600x1200
MAC13”
67
640x480
MAC16”
75
832x624
MAC19”
75
1024x768
59
1024x768
75
1152x870
MAC21”
Images may also be projected when signals other than the above are input.
However, some functions may be limited.
Composite Video/S-Video
Resolutions Supported by EB-455Wi/450W/440W
Computer signals (analog RGB)
Signal
Refresh Rate (Hz)
Resolution (dots)
VGA
60/72/75/85
640x480
SVGA
56/60/72/75/85
800x600
XGA
60/70/75/85
1024x768
WXGA
60
1280x768
60
1360x768
60/75/85
1280x800
60/75/85
1440x900
WXGA+
List of Supported Resolutions
121
Signal
Refresh Rate (Hz)
Resolution (dots)
WSXGA+*
60
1680x1050
SXGA
70/75/85
1152x864
60/75/85
1280x1024
60/75/85
1280x960
SXGA+
60/75
1400x1050
UXGA
60
1600x1200
MAC13”
67
640x480
MAC16”
75
832x624
MAC19”
75
1024x768
59
1024x768
75
1152x870
MAC21”
* Only compatible when Wide is selected as the Resolution from the
Configuration Menu.s p.75
Images may also be projected when signals other than the above are input.
However, some functions may be limited.
Component Video
Signal
Refresh Rate (Hz)
Resolution (dots)
SDTV (480i)
60
720x480
SDTV(576i)
50
720x576
SDTV(480p)
60
720x480
SDTV(576p)
50
720x576
HDTV(720p)
50/60
1280x720
HDTV(1080i)
50/60
1920x1080
Composite Video/S-Video
Signal
Refresh Rate (Hz)
Resolution (dots)
TV (NTSC)
60
720x480
TV(PAL,SECAM)
50/60
720x576
ESC/VP21 Commands
122
Item
Command List
Logo
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
Item
Power ON/OFF
Signal selection
On
PWR ON
Off
PWR OFF
Computer1
Computer2
A/V Mute On/Off
A/V Mute selection
Command
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
Auto
SOURCE 2F
RGB
SOURCE 21
Component
SOURCE 24
Video
SOURCE 41
S-Video
SOURCE 42
USB Display
SOURCE 51
USB
SOURCE 52
LAN
SOURCE 53
On
MUTE ON
Off
MUTE OFF
Black
MSEL 00
Blue
MSEL 01
Command
MSEL 02
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
ESC/VP21 Commands
123
•
•
•
•
Cable Layouts
Serial Connection
• Connector shape: D-Sub 9-pin (male)
• Projector input port name: RS-232C
<At the projector>
<At the computer>
<At the projector>
Signal Name
(PC serial cable)
Function
GND
Signal wire ground
TD
Transmit data
RD
Receive data
Communications protocol
• Default baud rate setting: 9600 bps
<At the computer>
Data length: 8 bit
Parity: None
Stop-bit: 1 bit
Flow control: None
About PJLink
124
PJLink Class1 was established by the JBMIA (Japan Business Machine and
Information System Industries Association) as a standard protocol for
controlling network-compatible projector's as part of their efforts to
standardize projector control protocols.
The network functions for the projector comply with the PJLink Class1
standard established by the JBMIA.
See the network menu for more information on network settings related to
PJLink. s p.80
It complies with all commands except for the following commands defined
by PJLink Class1, and agreement was confirmed by the PJLink standard
adaptability verification.
URL:http://pjlink.jbmia.or.jp/english/
• Non-compatible commands
Function
Mute settings
PJLink Command
Image muting set
AVMT 11
Audio muting set
AVMT 21
• Input names defined by PJLink and corresponding projector sources
Source
PJLink Command
Computer1
INPT 11
Computer2
INPT 12
Video
INPT 21
S-Video
INPT 22
USB
INPT 41
LAN
INPT 52
USB Display
INPT 53
• Manufacturer name displayed for "Manufacture name information query"
EPSON
• Model name displayed for "Product name information query"
EB-465i
EB-460
EB-455Wi
EB-450W
EB-440W
Specifications
125
Projector General Specifications
EB-465i
Product name
EB-460
EB-455Wi
EB-450W
369 (W) ^ 155 (H) ^ 483 (D) mm
Dimensions
0.63"
Panel size
0.59" Wide
Polysilicon TFT active matrix
Display method
786,432
XGA (1024 (W) ^ 768 (H) dots) ^ 3
Resolution
1,024,000
WXGA (1280 (W) ^ 800 (H) dots) ^ 3
Focus adjustment
Manual
Zoom adjustment
Digital (1-1.35)
UHE lamp, 230 W, Model No.: ELPLP57
Lamp
Max. audio output
12 W monaural
10 W monaural
12 W monaural
10 W monaural
100 to 240 V AC ±10%, 50/60 Hz 3.7-1.6 A
Power supply
100-120 V area
Operating: 363 W
Standby power consumption (Communication On): 10.0 W
Standby power consumption (Communication Off): 0.3 W
220-240 V area
Operating: 343 W
Standby power consumption (Communication On): 12.0 W
Standby power consumption (Communication Off): 0.3 W
Altitude 0 to 2,286 m
Operating altitude
Operating temperature
+5 to +35˚C (No condensation)
Storage temperature
-10 to +60˚C (No condensation)
Mass
10 W monaural
1
Speaker
Power consumption
EB-440W
Without Slide Plate
Approx. 5.8 kg
Approx. 5.7 kg
Approx. 5.8 kg
Approx. 5.7 kg
With Slide Plate
Approx. 6.3 kg
Approx. 6.2 kg
Approx. 6.3 kg
Approx. 6.2 kg
Specifications
Connectors
126
Computer1 input port
1
Mini D-Sub 15-pin (female) blue
Computer2 input port
1
Mini D-Sub 15-pin (female) blue
Audio1 port
1
Stereo mini pin jack
Audio2 port
1
Stereo mini pin jack
Video input port
1
RCA pin jack
S-Video input port
1
Mini DIN 4-pin
Audio-L/R input port
1
RCA pin jack x 2 (L, R)
Microphone (Mic) input
port
1
Stereo mini pin jack
Audio Output
(AudioOut) port
1
Stereo mini pin jack
Monitor Output
(Monitor Out) Port
1
Mini D-Sub 15-pin (female) black
USB(TypeA) port *
USB(TypeB) port *
1
USB connector (Type A)
USB connector (Type B)
USB port
1
USB Connector (Type A) for Optional Wireless LAN Unit
LAN port
1
RJ-45
RS-232C port
1
Mini D-Sub 9-pin (male)
* Supports USB 2.0. However, the operation of all USB compatible devices is not guaranteed.
Specifications
127
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Pixelworks DNX
™ ICs are used in this projector.
Angle of tilt
If you use the projector tilted at an angle of more than 5˚ it could be damaged and cause an accident.
Specifications
128
(for Projector only)
(for Projector and Easy Interactive Pen)
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We:
Located at:
Epson America, Inc.
3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
Tel:
562-290-5254
Declare under sole responsibility that the product identified herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed, is identical to the representative unit tested
and found to be compliant with the standards. Records maintained continue
to reflect the equipment being produced can be expected to be within the
variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR 2.909. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesired operation.
Trade Name:
EPSON
Type of Product:
LCD Projector
Model:
H317C/H318C/H342C/H440C/H441C
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television
reception. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference to radio
and television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this
device and may cause interference levels which exceed the limits established
by the FCC for this equipment. It is the responsibility of the user to obtain
and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables
connected to unused interfaces. Changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate the
equipment.
Specifications
129
(for Easy Interactive Pen only)
Since the Easy Interactive Pen is so small, FCC Statement for Verification is
written in the manual.
FCC Statement for Verification
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Appearance
A Distance until projection center
130
Appearance
With Slide Plate
131
Without Slide Plate
Units: mm
Glossary
132
This section explains easily terms that are used with the projector and difficult terms that are not explained in the text of this guide. For details, refer to other
commercially available publications.
AMX Device Discovery
AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
See the AMX Web site for more details.
URL http://www.amx.com/
Aspect Ratio
The ratio between an image's length and its height. HDTV images have an aspect ratio of 16:9 and appear elongated. The aspect ratio for standard
images is 4:3.
(Aspect Ratio)
Component Video
A Video signal which has the luminance component and color component separated to provide better image quality.
Refers to images that consist of three independent signals: Y (luminance signal), Pb and Pr (color difference signals).
Composite video
Video signals that have the video brightness signals and color signals mixed together. The type of signals commonly used by household video
equipment (NTSC, PAL, and SECAM formats). The carrier signal Y (luminance signal) and chroma (color) signal that are contained in the color bar
are overlapped to form a single signal.
Contrast
The relative brightness of the light and dark areas of an image can be increased or decreased to make text and graphics stand out more clearly, or to
make them appear softer. Adjusting this particular property of an image is called Contrast adjustment.
DHCP
An abbreviation of Dynamic Host Configuration Protocol, this protocol automatically assigns an IP Addressg to equipment connected to a
Network.
Dolby Digital
A sound format developed by Dolby Laboratories. Normal stereo is a 2-channel format that uses two speakers. Dolby Digital is a 6-channel (5.1channel) system which adds to this a center speaker, two rear speakers, and a sub-woofer.
Gateway address
This is a server (router) for communicating across a Network (subnet) divided according to Subnet Maskg.
(Gateway address)
HDTV
An abbreviation for High-Definition Television that refers to high-definition systems which satisfy the following conditions.
• Vertical resolution of 720p or 1080i or greater (p = Progressiveg, i = Interlaceg)
• Screen Aspect Ratiog of 16:9
• Dolby Digitalg audio reception and playback (or output)
Interlace
A method of image scanning whereby the image data is divided into fine horizontal lines that are displayed in sequence starting from left to right and
then from top to bottom. The even-numbered lines and odd-numbered lines are displayed alternately.
IP Address
A number to identify a computer connected to a Network.
Progressive
A method of image scanning whereby the image data from a single image is scanned sequentially from top to bottom to create a single image.
Refresh Rate
The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be
scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh Rate and is
expressed in hertz (Hz).
Glossary
133
SDTV
An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTVg HighDefinition Television.
SNMP
An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and
computers connected to a TCP/IP Network.
sRGB
An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by
computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source
to sRGB.
SSID
SSID is identification data for connecting to another device on a wireless LAN. Wireless communication is possible between devices that correspond
to SSID.
Subnet mask
(Subnet mask)
This is a numerical value that defines the number of bits used for the Network address on a divided network (subnet) from the IP Address.
SVGA
A type of video signal with a resolution of 800 (horizontal) ^ 600 (vertical) dots that is used by IBM PC/AT-compatible computers.
S-Video
A Video signal which has the luminance component and color component separated to provide better image quality.
Refers to images that consist of two independent signals: Y (luminance signal) and C (color signal).
SXGA
A type of video signal with a resolution of 1,280 (horizontal) ^ 1,024 (vertical) dots that is used by IBM PC/AT-compatible computers.
Sync.
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not of
a good quality. The process of matching the phases of these signals (the relative position of the crests and the troughs in the signal) is called
Synchronization. If the signals are not synchronized, flickering, blurriness, and horizontal interference occur.
Tracking
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not of
a good quality. The process of matching the frequency of these signals (the number of crests in the signal) is called Tracking. If Tracking is not carried
out correctly, wide vertical stripes appear in the signal.
Trap IP Address
This is the IP Addressg for the destination computer used for error notification in SNMP.
VGA
A type of video signal with a resolution of 640 (horizontal) ^ 480 (vertical) dots that is used by IBM PC/AT-compatible computers.
WPS
WPS is an abbreviation of Wi-Fi Protected Setup. Wi-Fi Protected Setup has been devised by the Wi-Fi Alliance as a means of easily setting up and
securing a Wireless LAN.
XGA
A type of video signal with a resolution of 1,024 (horizontal) ^ 768 (vertical) dots that is used by IBM PC/AT-compatible computers.
General Notes
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko
Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by the
purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising
from the use of any options or any consumable products other than those designated as
Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Wireless Telegraphy Act Regulations
The following acts are prohibited by the Wireless Telegraphy Act.
• Modifying and disassembling (including the antenna)
• Removing the label of conformance
• IEEE 802.11a (50 Hz band) external use
134
XP Home Edition operating system
® Windows
®
Vista operating system
® Windows
®
Windows 7 operating system
®
®
Microsoft
Microsoft
Microsoft
In this guide, the operating systems above are referred to as "Windows
2000", "Windows XP", "Windows Vista", and "Windows 7". Furthermore,
the collective term Windows may be used to refer to Windows 2000,
Windows XP, Windows Vista, and Windows 7, and multiple versions of
Windows may be referred to as, for example, Windows 2000/XP/Vista, with
the Windows notation omitted.
Mac
Mac
Mac
Mac
OS
OS
OS
OS
Microsoft
Microsoft
® Windows
® 2000 operating system
Windows XP Professional operating system
®
®
10.3.x
10.4.x
10.5.x
10.6.x
In this guide, the operating systems above are referred to as "Mac OS X
10.3.9", "Mac OS X 10.4.x", "Mac OS X 10.5.x", and "Mac OS X 10.6.x".
Furthermore, the collective term "Mac OS" is used to refer to them.
General Notice:
IBM, DOS/V, and XGA are trademarks or registered trademarks of International
Business Machines Corporation.
Macintosh, Mac, and iMac are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, Windows Vista, PowerPoint, and Windows logo
are trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries.
Pixelworks and DNX are trademarks of Pixelworks Inc.
WPA and WPA2 are registered trademarks of Wi-Fi Allience.
PJLink trademark is a trademark applied for registration or is already registered in
Japan, the United States of America and other countries and areas.
Other product names used herein are also for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
™
About Notations
X
X
X
X
™
General Notes
©SEIKO EPSON CORPORATION 2010. All rights reserved.
135
GNU GPL
This projector product includes the open source software programs which apply
the GNU General Public License Version 2 or later version ("GPL Programs").
We provide the source code of the GPL Programs until five (5) years after the
discontinuation of same model of this projector product.
If you desire to receive the source code of the GPL Programs, please see the
"EPSON Projector Contact List" in the User's Guide, and contact the customer
support of your region.
These GPL Programs are WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details.
The list of GPL Programs is as follows and the names of author are described in the
source code of the GPL Programs
The list of GPL Programs
busybox-1.7.2
libgcc1(gcc-4.2.3)
linux-2.6.20
patches
udhcp 0.9.8
uvc rev.219
wireless_tools 29
Pixelworks PWC950 SDK drivers
The GNU General Public License Version 2 is as follows. You also can see the GNU
General Public License Version 2 at http://www.gnu.org/licenses/.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute
verbatim copies of this license document, but changing it is not allowed.
Preamble
General Notes
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public License is intended to guarantee your
freedom to share and change free software--to make sure the software is free for all its
users. This General Public License applies to most of the Free Software Foundation's
software and to any other program whose authors commit to using it. (Some other Free
Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies
of free software (and charge for this service if you wish), that you receive source code or
can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you
these rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you
must give the recipients all the rights that you have. You must make sure that they, too,
receive or can get the source code. And you must show them these terms so they know
their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this
license which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified
by someone else and passed on, we want its recipients to know that what they have is not
the original, so that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid
the danger that redistributors of a free program will individually obtain patent licenses,
in effect making the program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
136
GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed
by the copyright holder saying it may be distributed under the terms of this
General Public License. The "Program", below, refers to any such program or
work, and a "work based on the Program" means either the Program or any
derivative work under copyright law: that is to say, a work containing the Program
or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by
this License; they are outside its scope. The act of running the Program is not
restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by
running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License along
with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such modifications
or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that you
changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in
part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of this
License.
General Notes
c)
c)
3.
If the modified program normally reads commands interactively when run,
you must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to
print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections
of that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the
Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work
written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the
Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this
License.
You may copy and distribute the Program (or a work based on it, under Section 2)
in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source
code, which must be distributed under the terms of Sections 1 and 2 above on
a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any
third party, for a charge no more than your cost of physically performing
source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
137
4.
5.
6.
Accompany it with the information you received as to the offer to distribute
corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b
above.)
The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all the
source code for all modules it contains, plus any associated interface definition
files, plus the scripts used to control compilation and installation of the executable.
However, as a special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the operating system on which
the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from
a designated place, then offering equivalent access to copy the source code from
the same place counts as distribution of the source code, even though third parties
are not compelled to copy the source along with the object code.
You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated so long as such
parties remain in full compliance.
You are not required to accept this License, since you have not signed it. However,
nothing else grants you permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based
on the Program), you indicate your acceptance of this License to do so, and all its
terms and conditions for copying, distributing or modifying the Program or works
based on it.
Each time you redistribute the Program (or any work based on the Program), the
recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You may
not impose any further restrictions on the recipients' exercise of the rights granted
herein. You are not responsible for enforcing compliance by third parties to this
License.
General Notes
7.
8.
9.
If, as a consequence of a court judgment or allegation of patent infringement or for
any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent license would not permit
royalty-free redistribution of the Program by all those who receive copies directly
or indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system,
which is implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed through that
system in reliance on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
If the distribution and/or use of the Program is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder who
places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted
only in or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
The Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or
concerns.
138
Each version is given a distinguishing version number. If the Program specifies a
version number of this License which applies to it and "any later version", you have
the option of following the terms and conditions either of that version or of any
later version published by the Free Software Foundation. If the Program does not
specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose
distribution conditions are different, write to the author to ask for permission. For
software which is copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of software generally.
11.
12.
NO WARRANTY
BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
General Notes
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the
public, the best way to achieve this is to make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the
start of each source file to most effectively convey the exclusion of warranty; and each file
should have at least the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along with this
program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,
Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an
interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes
with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free
software, and you are welcome to redistribute it under certain conditions; type
`show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts
of the General Public License. Of course, the commands you use may be called
something other than `show w' and `show c'; they could even be mouse-clicks or menu
items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any,
to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the
names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
139
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may consider it more
useful to permit linking proprietary applications with the library. If this is what you want
to do, use the GNU Lesser General Public License instead of this License.
GNU LGPL
This projector product includes the open source software programs which apply
the GNU Lesser General Public License Version 2 or later version ("LGPL
Programs").
We provide the source code of the LGPL Programs until five (5) years after the
discontinuation of same model of this projector product.
If you desire to receive the source code of the LGPL Programs, please see the
"EPSON Projector Contact List" in the User's Guide, and contact the customer
support of your region.
These LGPL Programs are WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details.
The list of LGPL Programs is as follows and the names of author are described in
the source code of the LGPL Programs.
LGPL Programs
uClibc-0.9.29
SDL-1.2.13
The GNU Lesser General Public License Version 2 is as follows. You also can see the
GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the
GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
General Notes
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public Licenses are intended to guarantee your
freedom to share and change free software--to make sure the software is free for all its
users.
This license, the Lesser General Public License, applies to some specially designated
software packages--typically libraries--of the Free Software Foundation and other
authors who decide to use it. You can use it too, but we suggest you first think carefully
about whether this license or the ordinary General Public License is the better strategy to
use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish); that you
receive source code or can get it if you want it; that you can change the software and use
pieces of it in new free programs; and that you are informed that you can do these
things.
To protect your rights, we need to make restrictions that forbid distributors to deny you
these rights or to ask you to surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must
give the recipients all the rights that we gave you. You must make sure that they, too,
receive or can get the source code. If you link other code with the library, you must
provide complete object files to the recipients, so that they can relink them with the
library after making changes to the library and recompiling it. And you must show them
these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we
offer you this license, which gives you legal permission to copy, distribute and/or
modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for
the free library. Also, if the library is modified by someone else and passed on, the
recipients should know that what they have is not the original version, so that the
original author's reputation will not be affected by problems that might be introduced
by others.
Finally, software patents pose a constant threat to the existence of any free program. We
wish to make sure that a company cannot effectively restrict the users of a free program
by obtaining a restrictive license from a patent holder. Therefore, we insist that any
patent license obtained for a version of the library must be consistent with the full
freedom of use specified in this license.
140
Most GNU software, including some libraries, is covered by the ordinary GNU General
Public License. This license, the GNU Lesser General Public License, applies to certain
designated libraries, and is quite different from the ordinary General Public License. We
use this license for certain libraries in order to permit linking those libraries into nonfree programs.
When a program is linked with a library, whether statically or using a shared library, the
combination of the two is legally speaking a combined work, a derivative of the original
library. The ordinary General Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser General Public License
permits more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect
the user's freedom than the ordinary General Public License. It also provides other free
software developers Less of an advantage over competing non-free programs. These
disadvantages are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain special
circumstances.
For example, on rare occasions, there may be a special need to encourage the widest
possible use of a certain library, so that it becomes a de-facto standard. To achieve this,
non-free programs must be allowed to use the library. A more frequent case is that a free
library does the same job as widely used non-free libraries. In this case, there is little to
gain by limiting the free library to free software only, so we use the Lesser General Public
License.
In other cases, permission to use a particular library in non-free programs enables a
greater number of people to use a large body of free software. For example, permission
to use the GNU C Library in non-free programs enables many more people to use the
whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it
does ensure that the user of a program that is linked with the Library has the freedom
and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow.
Pay close attention to the difference between a "work based on the library" and a "work
that uses the library". The former contains code derived from the library, whereas the
latter must be combined with the library in order to run.
General Notes
GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which
contains a notice placed by the copyright holder or other authorized party saying it
may be distributed under the terms of this Lesser General Public License (also
called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to
be conveniently linked with application programs (which use some of those
functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been
distributed under these terms. A "work based on the Library" means either the
Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications
and/or translated straightforwardly into another language. (Hereinafter,
translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making
modifications to it. For a library, complete source code means all the source code
for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by
this License; they are outside its scope. The act of running a program using the
Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the
Library in a tool for writing it). Whether that is true depends on what the Library
does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source
code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus
forming a work based on the Library, and copy and distribute such modifications
or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
141
a)
b)
The modified work must itself be a software library.
You must cause the files modified to carry prominent notices stating that you
changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third
parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be
supplied by an application program that uses the facility, other than as an
argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such
function or table, the facility still operates, and performs whatever part of its
purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose
that is entirely well-defined independent of the application. Therefore,
Subsection 2d requires that any application-supplied function or table used
by this function must be optional: if the application does not supply it, the
square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections
of that work are not derived from the Library, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the
Library, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work
written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the
Library (or with a work based on the Library) on a volume of a storage or
distribution medium does not bring the other work under the scope of this
License.
General Notes
3.
4.
5.
You may opt to apply the terms of the ordinary GNU General Public License
instead of this License to a given copy of the Library. To do this, you must alter all
the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has appeared, then you
can specify that version instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the
ordinary GNU General Public License applies to all subsequent copies and
derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a
program that is not a library.
You may copy and distribute the Library (or a portion or derivative of it, under
Section 2) in object code or executable form under the terms of Sections 1 and 2
above provided that you accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of Sections 1 and
2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated
place, then offering equivalent access to copy the source code from the same place
satisfies the requirement to distribute the source code, even though third parties
are not compelled to copy the source along with the object code.
A program that contains no derivative of any portion of the Library, but is
designed to work with the Library by being compiled or linked with it, is called a
"work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an
executable that is a derivative of the Library (because it contains portions of the
Library), rather than a "work that uses the library". The executable is therefore
covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of
the Library, the object code for the work may be a derivative work of the Library
even though the source code is not. Whether this is true is especially significant if
the work can be linked without the Library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by law.
142
6.
If such an object file uses only numerical parameters, data structure layouts and
accessors, and small macros and small inline functions (ten lines or less in length),
then the use of the object file is unrestricted, regardless of whether it is legally a
derivative work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object
code for the work under the terms of Section 6. Any executables containing that
work also fall under Section 6, whether or not they are linked directly with the
Library itself.
As an exception to the Sections above, you may also combine or link a "work that
uses the Library" with the Library to produce a work containing portions of the
Library, and distribute that work under terms of your choice, provided that the
terms permit modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used
in it and that the Library and its use are covered by this License. You must supply a
copy of this License. If the work during execution displays copyright notices, you
must include the copyright notice for the Library among them, as well as a
reference directing the user to the copy of this License. Also, you must do one of
these things:
a) Accompany the work with the complete corresponding machine-readable
source code for the Library including whatever changes were used in the work
(which must be distributed under Sections 1 and 2 above); and, if the work is
an executable linked with the Library, with the complete machine-readable
"work that uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes
the contents of definitions files in the Library will not necessarily be able to
recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A
suitable mechanism is one that (1) uses at run time a copy of the library
already present on the user's computer system, rather than copying library
functions into the executable, and (2) will operate properly with a modified
version of the library, if the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give
the same user the materials specified in Subsection 6a, above, for a charge no
more than the cost of performing this distribution.
General Notes
d)
7.
8.
If distribution of the work is made by offering access to copy from a
designated place, offer equivalent access to copy the above specified materials
from the same place.
e) Verify that the user has already received a copy of these materials or that you
have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must
include any data and utility programs needed for reproducing the executable from
it. However, as a special exception, the materials to be distributed need not include
anything that is normally distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the operating system on which
the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other
proprietary libraries that do not normally accompany the operating system. Such a
contradiction means you cannot use both them and the Library together in an
executable that you distribute.
You may place library facilities that are a work based on the Library side-by-side in
a single library together with other library facilities not covered by this License,
and distribute such a combined library, provided that the separate distribution of
the work based on the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the
Library, uncombined with any other library facilities. This must be
distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a
work based on the Library, and explaining where to find the accompanying
uncombined form of the same work.
You may not copy, modify, sublicense, link with, or distribute the Library except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the Library is void, and will automatically
terminate your rights under this License. However, parties who have received
copies, or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
143
9.
You are not required to accept this License, since you have not signed it. However,
nothing else grants you permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Library (or any work based on
the Library), you indicate your acceptance of this License to do so, and all its terms
and conditions for copying, distributing or modifying the Library or works based
on it.
10. Each time you redistribute the Library (or any work based on the Library), the
recipient automatically receives a license from the original licensor to copy,
distribute, link with or modify the Library subject to these terms and conditions.
You may not impose any further restrictions on the recipients' exercise of the
rights granted herein. You are not responsible for enforcing compliance by third
parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for
any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may not
distribute the Library at all. For example, if a patent license would not permit
royalty-free redistribution of the Library by all those who receive copies directly or
indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply, and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system
which is implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed through that
system in reliance on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
General Notes
12. If the distribution and/or use of the Library is restricted in certain countries either
by patents or by copyrighted interfaces, the original copyright holder who places
the Library under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or
among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the
Lesser General Public License from time to time. Such new versions will be similar
in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Library specifies a
version number of this License which applies to it and "any later version", you have
the option of following the terms and conditions either of that version or of any
later version published by the Free Software Foundation. If the Library does not
specify a license version number, you may choose any version ever published by
the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose
distribution conditions are incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this.
Our decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of software
generally.
15.
NO WARRANTY
BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
144
16.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY
OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the
public, we recommend making it free software that everyone can redistribute and
change. You can do so by permitting redistribution under these terms (or, alternatively,
under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them
to the start of each source file to most effectively convey the exclusion of warranty; and
each file should have at least the "copyright" line and a pointer to where the full notice is
found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the
terms of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along
with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
General Notes
You should also get your employer (if you work as a programmer) or your school, if any,
to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the
names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a
library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
BSD License (Berkeley Software Distribution License)
This projector product includes the open source software program "University of
California, Berkeley License (Berkeley Software Distribution License)" which applies
the terms and conditions provided by owner of the copyright to the "BSD License".
The "BSD License" are WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
List of BSD License programs
busybox_1.7.2
License terms of conditions of each program which are provided by owner of the
copyright to the “BSD License” are as follows.
Copyright (c) The Regents of the University of California. All rights reserved.
This code is derived from software contributed to Berkeley by Kenneth Almquist.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1.
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2.
3.
Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
Neither the name of the University nor the names of its contributors may be used
to endorse or promote products derived from this software without specific prior
written permission.
145
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
libjpeg
This projector product includes the open source software program "libjpeg" which
applies the terms and conditions provided by owner of the copyright to the "libjpeg".
The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
List of libjpeg programs
libjpeg-6b
License terms of conditions of each program which are provided by owner of the
copyright to the "libjpeg" are as follows.
Copyright (C) 1994-1997, Thomas G. Lane. This file is part of the Independent JPEG
Group's software. For conditions of distribution and use, see the accompanying
README file.
This distribution contains the sixth public release of the Independent JPEG Group's free
JPEG software. You are welcome to redistribute this software and to use it for any
purpose, subject to the conditions under LEGAL ISSUES, below.
LEGAL ISSUES
============
In plain English:
1.
We don't promise that this software works. (But if you find any bugs, please let us
know!)
2.
You can use this software for whatever you want. You don't have to pay us.
General Notes
3.
You may not pretend that you wrote this software. If you use it in a program, you
must acknowledge somewhere in your documentation that you've used the IJG
code.
In legalese:
The authors make NO WARRANTY or representation, either express or implied, with
respect to this software, its quality, accuracy, merchantability, or fitness for a particular
purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to
its quality and accuracy.
This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except
as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or
portions thereof) for any purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README
file must be included, with this copyright and no-warranty notice unaltered; and
any additions, deletions, or changes to the original files must be clearly indicated
in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation
must state that "this software is based in part on the work of the Independent JPEG
Group".
(3) Permission for use of this software is granted only if the user accepts full
responsibility for any undesirable consequences; the authors accept NO
LIABILITY for damages of any kind.
These conditions apply to any software derived from or based on the IJG code, not just to
the unmodified library. If you use our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author's name or company name in
advertising or publicity relating to this software or products derived from it. This
software may be referred to only as "the Independent JPEG Group's software".
We specifically permit and encourage the use of this software as the basis of commercial
products, provided that all warranty or liability claims are assumed by the product
vendor.
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole
proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is
NOT covered by the above copyright and conditions, but instead by the usual
distribution terms of the Free Software Foundation; principally, that you must include
source code if you redistribute it. (See the file ansi2knr.c for full details.) However, since
ansi2knr.c is not needed as part of any program generated from the IJG code, this does
not limit you more than the foregoing paragraphs do.
146
The Unix configuration script "configure" was produced with GNU Autoconf. It is
copyright by the Free Software Foundation but is freely distributable. The same holds
for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another
support script, install-sh, is copyright by M.I.T. but is also freely distributable.
It appears that the arithmetic coding option of the JPEG spec is covered by patents
owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used
without obtaining one or more licenses. For this reason, support for arithmetic coding
has been removed from the free JPEG software. (Since arithmetic coding provides only a
marginal gain over the unpatented Huffman mode, it is unlikely that very many
implementations will support it.) So far as we are aware, there are no patent restrictions
on the remaining code.
The IJG distribution formerly included code to read and write GIF files. To avoid
entanglement with the Unisys LZW patent, GIF reading support has been removed
altogether, and the GIF writer has been simplified to produce "uncompressed GIFs".
This technique does not use the LZW algorithm; the resulting GIF files are larger than
usual, but are readable by all standard GIF decoders.
We are required to state that
"The Graphics Interchange Format(c) is the Copyright property of CompuServe
Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated."
libpng
This projector product includes the open source software program "libpng" which
applies the terms and conditions provided by owner of the copyright to the "libpng".
The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
List of libpng programs
libpng-1.2.7
License terms of conditions of each program which are provided by owner of the
copyright to the "libpng" are as follows.
For conditions of distribution and use, see copyright notice in png.h Copyright (c)
1998-2004 Glenn Randers-Pehrson (Version 0.96 Copyright (c) 1996, 1997 Andreas
Dilger) (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
This copy of the libpng notices is provided for your convenience. In case of any
discrepancy between this copy and the notices in the file png.h that is included in the
libpng distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
General Notes
If you modify libpng you may insert additional notices immediately following this
sentence.
libpng version 1.2.6, September 12, 2004, is Copyright (c) 2004 Glenn Randers-Pehrson,
and is distributed according to the same disclaimer and license as libpng-1.2.5 with the
following individual added to the list of Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c)
2000-2002 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-1.0.6 with the following individuals added to the list of
Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or
against infringement. There is no warranty that our efforts or the library will fulfill
any of your particular purposes or needs. This library is provided with all faults,
and the entire risk of satisfactory quality, performance, accuracy, and effort is with
the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c)
1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-0.96, with the following individuals added to the list of
Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997
Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88,
with the following individuals added to the list of Contributing Authors:
John Bowler
Kevin BraceySam Bushell
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
147
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996
Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, "Contributing Authors" is defined as the
following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group
42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the
warranties of merchantability and of fitness for any purpose. The Contributing Authors
and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary,
or consequential damages, which may result from the use of the PNG Reference Library,
even if advised of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or
portions hereof, for any purpose, without fee, subject to the following restrictions:
1.
The origin of this source code must not be misrepresented.
2.
Altered versions must be plainly marked as such and must not be misrepresented
as being the original source.
3.
This Copyright notice may not be removed or altered from any source or altered
source distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and
encourage the use of this source code as a component to supporting the PNG file format
in commercial products. If you use this source code in a product, acknowledgment is not
required but would be appreciated.
A "png_get_copyright" function is available, for convenient use in "about" boxes and the
like:
printf("%s",png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and
"pngbar.jpg (88x31) and "pngnow.png" (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a
certification mark of the Open Source Initiative.
General Notes
Glenn Randers-Pehrson
glennrp@users.sourceforge.net
September 12, 2004
zlib
This projector product includes the open source software program "zlib" which applies
the terms and conditions provided by owner of the copyright to the "zlib".
The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
List of zlib programs
zlib-1.1.4
License terms of conditions of each program which are provided by owner of the
copyright to the “zlib” are as follows.
Copyright notice:
(C) 1995-1998 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied warranty. In no
event will the authors be held liable for any damages arising from the use of this
software.
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
1.
2.
The origin of this software must not be misrepresented; you must not claim
that you wrote the original software. If you use this software in a product, an
acknowledgment in the product documentation would be appreciated but is
not required.
Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly
Mark Adler
jloup@gzip.org
madler@alumni.caltech.edu
If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal
documents to sign. The sources are provided for free but without warranty of any kind.
The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not
include third-party code.
148
If you redistribute modified sources, we would appreciate that you include in the file
ChangeLog history information documenting your changes.
libmd5-rfc
This projector product includes the open source software program "libmd5-rfc" which
applies the terms and conditions provided by owner of the copyright to the "libmd5rfc".
The "libmd5-rfc" are WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
List of libmd5-rfc programs
libmd5-rfc
License terms of conditions of each program which are provided by owner of the
copyright to the "libmd5-rfc" are as follows.
Copyright (C) 1999, 2002 Aladdin Enterprises. All rights reserved.
This software is provided 'as-is', without any express or implied warranty. In no
event will the authors be held liable for any damages arising from the use of this
software.
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
1. The origin of this software must not be misrepresented; you must not claim
that you wrote the original software. If you use this software in a product, an
acknowledgment in the product documentation would be appreciated but is
not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
L. Peter Deutsch ghost@aladdin.com
Independent implementation of MD5 (RFC 1321).
This code implements the MD5 Algorithm defined in RFC 1321, whose text is available
at
http://www.ietf.org/rfc/rfc1321.txt
The code is derived from the text of the RFC, including the test suite (section A.5) but
excluding the rest of Appendix A. It does not include any code or documentation that is
identified in the RFC as being copyrighted.
General Notes
The original and principal author of md5.h is L. Peter Deutsch <ghost@aladdin.com>.
Other authors are noted in the change history that follows (in reverse chronological
order):
2002-04-13 lpd Removed support for non-ANSI compilers; removed
references to Ghostscript; clarified derivation from RFC 1321; now handles byte
order either statically or dynamically.
1999-11-04 lpd Edited comments slightly for automatic TOC extraction.
1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5);
added conditionalization for C++ compilation from Martin Purschke
<purschke@bnl.gov>.
1999-05-03 lpd Original version.
ncurses
This projector product includes the open source software program "ncurses" which
applies the terms and conditions provided by owner of the copyright to the "ncurses".
The "ncurses" are WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
List of ncurses programs
ncurses-5.6
License terms of conditions of each program which are provided by owner of the
copyright to the “ncurses” are as follows.
Copyright (c) 1998-2002,2003 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, distribute with modifications, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
149
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name(s) of the above copyright holders shall not
be used in advertising or otherwise to promote the sale, use or other dealings in this
Software without prior written authorization.
mDNSResponder
This projector product includes the open source software program "mDNSResponder"
which applies the following license terms "Apache License Version 2.0, January 2004".
List of "mDNSResponder"
mDNSResponder-107.6 (only mDNSResponderPosix is used)
License terms “Apache License Version 2.0, January 2004" are as follows.
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1.
Definitions.
"License" shall mean the terms and conditions for use, reproduction, and
distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright
owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that
control, are controlled by, or are under common control with that entity. For the
purposes of this definition, "control" means (i) the power, direct or indirect, to
cause the direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding
shares, or (iii) beneficial ownership of such entity.
General Notes
2.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions
granted by this License.
"Source" form shall mean the preferred form for making modifications, including
but not limited to software source code, documentation source, and configuration
files.
"Object" form shall mean any form resulting from mechanical transformation or
translation of a Source form, including but not limited to compiled object code,
generated documentation, and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form,
made available under the License, as indicated by a copyright notice that is
included in or attached to the work (an example is provided in the Appendix
below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is
based on (or derived from) the Work and for which the editorial revisions,
annotations, elaborations, or other modifications represent, as a whole, an
original work of authorship. For the purposes of this License, Derivative Works
shall not include works that remain separable from, or merely link (or bind by
name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version
of the Work and any modifications or additions to that Work or Derivative Works
thereof, that is intentionally submitted to Licensor for inclusion in the Work by
the copyright owner or by an individual or Legal Entity authorized to submit on
behalf of the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent to the
Licensor or its representatives, including but not limited to communication on
electronic mailing lists, source code control systems, and issue tracking systems
that are managed by, or on behalf of, the Licensor for the purpose of discussing and
improving the Work, but excluding communication that is conspicuously marked
or otherwise designated in writing by the copyright owner as "Not a
Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of
whom a Contribution has been received by Licensor and subsequently
incorporated within the Work.
Grant of Copyright License. Subject to the terms and conditions of this License,
each Contributor hereby grants to You a perpetual, worldwide, non-exclusive,
no-charge, royalty-free, irrevocable copyright license to reproduce, prepare
Derivative Works of, publicly display, publicly perform, sublicense, and distribute
the Work and such Derivative Works in Source or Object form.
150
3.
4.
Grant of Patent License. Subject to the terms and conditions of this License, each
Contributor hereby grants to You a perpetual, worldwide, non-exclusive, nocharge, royalty-free, irrevocable (except as stated in this section) patent license to
make, have made, use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable by such
Contributor that are necessarily infringed by their Contribution(s) alone or by
combination of their Contribution(s) with the Work to which such
Contribution(s) was submitted. If You institute patent litigation against any entity
(including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a
Contribution incorporated within the Work constitutes direct or contributory
patent infringement, then any patent licenses granted to You under this License
for that Work shall terminate as of the date such litigation is filed.
Redistribution. You may reproduce and distribute copies of the Work or
Derivative Works thereof in any medium, with or without modifications, and in
Source or Object form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy
of this License; and
(b) You must cause any modified files to carry prominent notices stating that
You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You
distribute, all copyright, patent, trademark, and attribution notices from the
Source form of the Work, excluding those notices that do not pertain to any
part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any
Derivative Works that You distribute must include a readable copy of the
attribution notices contained within such NOTICE file, excluding those
notices that do not pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed as part of the
Derivative Works; within the Source form or documentation, if provided
along with the Derivative Works; or, within a display generated by the
Derivative Works, if and wherever such third-party notices normally appear.
The contents of the NOTICE file are for informational purposes only and do
not modify the License. You may add Your own attribution notices within
Derivative Works that You distribute, alongside or as an addendum to the
NOTICE text from the Work, provided that such additional attribution
notices cannot be construed as modifying the License.
General Notes
5.
6.
7.
8.
You may add Your own copyright statement to Your modifications and may
provide additional or different license terms and conditions for use, reproduction,
or distribution of Your modifications, or for any such Derivative Works as a
whole, provided Your use, reproduction, and distribution of the Work otherwise
complies with the conditions stated in this License.
Submission of Contributions. Unless You explicitly state otherwise, any
Contribution intentionally submitted for inclusion in the Work by You to the
Licensor shall be under the terms and conditions of this License, without any
additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify the terms of
any separate license agreement you may have executed with Licensor regarding
such Contributions.
Trademarks. This License does not grant permission to use the trade names,
trademarks, service marks, or product names of the Licensor, except as required
for reasonable and customary use in describing the origin of the Work and
reproducing the content of the NOTICE file.
Disclaimer of Warranty. Unless required by applicable law or agreed to in writing,
Licensor provides the Work (and each Contributor provides its Contributions) on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied, including, without limitation, any warranties or
conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or
FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for
determining the appropriateness of using or redistributing the Work and assume
any risks associated with Your exercise of permissions under this License.
Limitation of Liability. In no event and under no legal theory, whether in tort
(including negligence), contract, or otherwise, unless required by applicable law
(such as deliberate and grossly negligent acts) or agreed to in writing, shall any
Contributor be liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a result of this
License or out of the use or inability to use the Work (including but not limited to
damages for loss of goodwill, work stoppage, computer failure or malfunction, or
any and all other commercial damages or losses), even if such Contributor has
been advised of the possibility of such damages.
151
9.
Accepting Warranty or Additional Liability. While redistributing the Work or
Derivative Works thereof, You may choose to offer, and charge a fee for,
acceptance of support, warranty, indemnity, or other liability obligations and/or
rights consistent with this License. However, in accepting such obligations, You
may act only on Your own behalf and on Your sole responsibility, not on behalf of
any other Contributor, and only if You agree to indemnify, defend, and hold each
Contributor harmless for any liability incurred by, or claims asserted against, such
Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice,
with the fields enclosed by brackets "[]" replaced with your own identifying
information. (Don't include the brackets!) The text should be enclosed in the
appropriate comment syntax for the file format. We also recommend that a file or
class name and description of purpose be included on the same "printed page" as
the copyright notice for easier identification within third-party archives.
Copyright [yyyy][name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under
the License.
Index
152
Control Panel Lock ............................... 52, 76
Cross .............................................................. 47
A
A/V Mute ...................................................... 40
Address 1 Setting ......................................... 87
Address 2 Settings ........................................ 87
Address 3 Setting ......................................... 87
Air exhaust vent ........................................... 11
Air filter replacement period ................... 115
Audio Input Port ......................................... 13
Auto Setup .................................................... 75
B
Basic Menu ................................................... 82
Blackboard .................................................... 39
Brightness ..................................................... 74
Image files ..................................................... 31
Image Menu ................................................. 74
Indicators ...................................................... 94
Info Menu ..................................................... 90
Input Signal .................................................. 90
IP Address .............................................. 83, 87
D
DHCP ............................................................
Direct Power On ..........................................
Display ...........................................................
Display Background ....................................
Display order ................................................
Display Settings ............................................
83
78
78
78
33
33
E
Easy Interactive Pen .................................... 18
ECO ............................................................... 77
ESC/VP21 ................................................... 122
Extended menu ............................................ 78
E-Zoom ......................................................... 47
C
Ceiling mount fixing points ....................... 15
Cleaning the Air filter and Air Intake Vent
........................................................................ 109
Cleaning the Projection Window ............ 109
Cleaning the Projector's Surface .............. 109
Color Adjustment ........................................ 74
Color Mode ............................................ 39, 74
Color Saturation .......................................... 74
Computer1 input port ................................. 14
Computer2 input port ................................. 14
Configuration Menu ................................... 73
Connecting USB devices ............................. 34
Consumables .............................................. 117
Continuous ................................................... 33
Contrast ........................................................ 74
Control panel ............................................... 15
I
J
jpg .................................................................. 28
K
Keystone ........................................................ 76
L
Lamp cover ................................................... 11
Lamp Hours .................................................. 90
Lamp indicator ............................................. 94
Lamp replacement period ........................ 112
Language ....................................................... 79
F
Freeze .............................................................
Front/Ceiling ................................................
Front/Pointing Down .................................
Full Lock .......................................................
41
78
78
52
M
Mail menu ..................................................... 87
Mail Notification ................................... 67, 87
Messages ....................................................... 78
Mic Input Level ............................................ 77
Mic input port .............................................. 14
Mouse Pointer .............................................. 48
G
Gateway Address ................................... 83, 86
H
Help function ............................................... 93
High Altitude Mode .................................... 78
How to replace the air filter ..................... 115
How to replace the lamp ........................... 112
N
Network Menu ............................................. 80
Index
Network Protect ........................................... 51
153
Rear/Ceiling .................................................. 78
Refresh Rate .................................................. 90
Remote Control ........................................... 16
Remote Receiver .................................... 11, 12
Replacing Batteries .................................... 111
Reset All ........................................................ 91
Reset Menu ................................................... 91
Resetting the lamp operating time
.................................................................. 91, 115
Resolution ............................................. 90, 120
Rotating images ........................................... 30
O
Operating temperature ............................. 125
Operation ...................................................... 78
Optional accessories .................................. 117
Others Menu ................................................ 88
Overheating .................................................. 95
P
Part Names and Functions ......................... 11
Password Protect ......................................... 50
Password protect sticker ............................. 51
Photo ............................................................. 39
PJLink .......................................................... 124
Pointer ........................................................... 46
Pointer Shape ............................................... 76
Port Number ................................................ 87
Position ......................................................... 75
Power Consumption ................................... 77
Power indicator ............................................ 94
Power inlet .................................................... 13
Power On Protect ........................................ 50
Presentation ........................................... 28, 39
Problem Solving ........................................... 94
Progressive .................................................... 75
Projecting Image Files ................................. 31
Projection ...................................................... 78
Projection Distance ................................... 118
Projection window ...................................... 12
Projector Name ............................................ 82
Standby Mode .............................................. 79
Startup Screen .............................................. 78
Storage temperature .................................. 125
Subnet Mask ........................................... 83, 86
Supported Resolutions .............................. 120
S-Video Input Port ...................................... 13
Sync Info ....................................................... 90
Sync. ............................................................... 75
R
T
Temp indicator ............................................
Theatre ..........................................................
Tint ................................................................
Tracking ........................................................
Trap IP Address ...........................................
S
Screen Size .................................................. 118
Screen switching time ................................. 33
Security menu .............................................. 84
Security slot .................................................. 12
Settings Menu ............................................... 76
Sharpness ...................................................... 74
Signal Menu .................................................. 75
Sleep Mode ................................................... 78
Slide plate ...................................................... 14
Slideshow ................................................ 29, 32
SMTP Server ................................................. 87
SNMP ...................................................... 68, 88
Soft keyboard ................................................ 81
Source ............................................................ 90
Source Search ......................................... 15, 21
Specifications ............................................. 125
Sports ............................................................. 39
sRGB .............................................................. 39
SSID ............................................................... 83
94
39
74
75
88
U
User Pattern .................................................. 71
User's Logo ................................................... 69
User's Logo Protect ...................................... 50
V
Video Input Port .......................................... 13
Video Signal ........................................... 76, 90
Volume .......................................................... 77
W
Web Browser ................................................
Web Control .................................................
Web Remotel ................................................
Wide-screen projection ..............................
Wired LAN menu ........................................
64
64
65
41
86
Index
Wireless LAN Menu .................................... 83
Wireless Mouse Function ........................... 48
154