Twist-Lock and Hubbellock Devices

Twist-Lock and Hubbellock Devices
Section B
Twist-Lock® and Hubbellock® Devices
Index
Product
Page
Midget Twist-Lock®
Devices
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
15A Midget Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
15A Twist-Lock® Devices - Features and Benefits . . . . . . . . . . . . . . . . . . . B-7
Features and Benefits
20 and 30A Plugs and Connector Bodies . . . . . . . . . . . . . . . . . . . . . . . . B-12
The Standard for Locking Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . B-13
Watertight Safety-Shroud® Twist-Lock® System . . . . . . . . . . . . . . . . . . . B-14
Safety-Shroud® Twist-Lock® System . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-15
Compatibility and Environmental Protection Chart . . . . . . . . . . . . . . . . . B-16
Twist-Lock® Devices
20A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-17
30A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-26
Switched Safety Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-36
Mechanical Interlock Switched Safety Enclosures . . . . . . . . . . . . . . . . . B-38
Add-A-Shroud® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-40
10, 20 and 30A Non-NEMA Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . B-41
15, 20 and 30A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-48
50A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-55
Hubbellock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-61
Technical Information
15, 20 and 30A Twist-Lock® and Safety-Shroud Devices . . . . . . . . . . . . B-69
Watertight Safety-Shroud®
and Circuit-Lock®
Watertight Safety-Shroud Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . B-70
50A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-71
Switched Twist-Lock® and Hubbellock® Enclosures . . . . . . . . . . . . . . . . B-72
Mechanical Interlock Switched Safety Enclosures. . . . . . . . . . . . . . . . . . B-73
Valise® Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-74
50 Amp Devices and
Hubbellock®
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-1
Twist-Lock® Devices
Summary
There’s Only One Manufacturer
of Twist-Lock®…Hubbell.
Insulgrip® Plugs, Connectors,
Receptacles and Inlets
The widest range of singularly
rated NEMA devices available.
Designed to last from
engineered thermoplastic
materials and high
performing alloys.
Safety-Shroud® Twist-Lock®
The ultimate in Twist-Lock
safety. A full offering of plugs
and connectors that lead the
field in personnel safety. Also
included are receptacles in
three styles, angled, surface
mount and semi-flush to
satisfy every installation need.
Watertight Safety-Shroud®
Twist-Lock®
A complete family of plugs,
connectors, receptacles and
inlets featuring UL Type 4X
enclosure ratings and
Safety-Shroud design.
B-2
There’s no company more synonymous
with a tradition of excellence in the
electrical industry than Hubbell. Having
introduced the Twist-Lock device in the
early 20th century Hubbell has been the
market leader ever since.
Hubbell Insulgrip® Twist-Lock’s rugged
construction features highly engineered
materials, roomy wiring chambers,
superior strain relief and powerful cord grip
designs. Insulgrip Twist-Lock products are
the foundation of the broadest breadth of
line available. Hubbell offers Twist-Lock for
minimum space applications (Midget), and
all other applications from 15 Amp to 50
Amp. Hubbell’s design expertise assures
the best performing products available.
Hubbell Re-Defines Excellence
The Insulgrip Twist-Lock product line
features a complete offering of 20A and
30A Safety Shroud Twist-Lock devices.
Current carrying blades are protected
by a fixed shroud, shielding them from
deformation. Even more importantly, the
shroud virtually eliminates user contact
with a partially engaged, energized plug.
For wet environments, Hubbell offers
the Watertight Safety-Shroud Twist-Lock
series. These products incorporate the
shrouding technology with a UL Type 4X
enclosure rating.
Watertight Mechanical Interlock
for Safety-Shroud® Twist-Lock®
Hubbell’s Circuit-Lock enclosure
products virtually eliminate
making or breaking the circuit
under load.
®
Wiring Device-Kellems
50 Amp Insulgrip
Twist-Lock®
An exclusive Hubbell design
delivering Insulgrip features,
insulated housing and superior
strain relief. They are tough
and rugged enough for the
most demanding construction
or industrial applications.
Midget Twist-Lock®
These 2 wire and 3 wire
products offer the same quality
as their larger counterparts,
but are sized to go where
they can’t. The optional
Valise® design makes for
fast, simple wiring.
Hubbellock® Devices
Hubbellock devices are the
proven choice to reduce
problems resulting from arcing,
lazy connections, loosening
terminals, moisture, corrosion
and rough use.
www.hubbell-wiring.com
Twist-Lock® Devices
Midget Twist-Lock®
Features and Benefits
Hubbell’s Valise® insulation displacement terminal for Midget Twist-Lock® Plugs and Connector Bodies are the right choice
for economy, wiring speed and long life.
Assembly screws have multiple drive heads for screwdriver versatility.
Only two assembly screws are needed to close this device, make
the wire terminations and retain the cord
Totally insulated body adds extra measure of safety
Abuse resistant nylon housing
Nylon webs join two sections together which makes
assembly of the device quick and easy
Patented locking lugs interlock the two sections together
when the device is assembled providing a secure
assembly, even in the most abusive environments
The insulation displacement terminal reduces the time
required for wire preparation and provides uniformity in
the quality of termination
HBL7594V
Powerful, cord-gripping jaws designed
to eliminate conductor slip and strain
on terminals
“TURN & PULL” marking is highly visible, reducing
possible damage to equipment by attempting
disconnection prior to unlocking
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-3
Twist-Lock® Devices
15 Ampere, 125 and 125/250 Volts
Midget Twist-Lock® Plugs and Flanged Inlets
W
IP20
1.25"
(31.8)
GR
SUITABILITY
Plugs
1.06"
(26.9)
HBL7465V
1.61"
(40.9)
1.19"
(30.2)
HBL7594V
2.00"
(50.8)
1.59"
(40.4)
1.17"
(29.7)
1.13"
(28.7)
HBL7594
1.69"
(42.9)
.86"
(21.8)
1.17"
(29.7)
HBL7570
15A 125V
NEMA ML-1P
15A 125/250V
NEMA ML-3P
15A 125V
NEMA ML-2P
Description
Cord Dia.
Catalog Number
Valise® plug, black nylon.
.220"-.385"
(5.6-9.8)
HBL7465V*
Valise® plug, black nylon,
insulation displacement terminals.
.300"-.430"
(7.6-10.9)
Black nylon cover, phenolic body,
multiple drive screw terminals.
–
–
–
HBL7594V
–
.281"-.421"
(7.1-10.7)
–
HBL7594
–
Angle plug, black nylon cover,
phenolic body, multiple drive
screw terminals.
.335"-.421"
(8.5-10.7)
–
HBL7570
–
Valise® plug, black nylon, with
insulation displacement terminals,
multiple drive screws.
.300"-.430"
(7.6-10.9)
–
–
HBL7485V*
Black nylon body, phenolic base,
multiple drive screw terminals,
cord grip.
.281"-.421"
(7.1-10.7)
–
–
HBL7485*
Same as above, except angle
cord grip.
.335"-.421"
(8.5-10.7)
–
–
HBL7432*
Flanged Inlets
Description
Catalog Number
Stainless steel flange, polarized,
exposed terminals.
HBL7467*
–
–
Stainless steel flange, not polarized,
exposed terminals.
HBL7466*
–
–
Exposed terminals, black nylon flange.
–
HBL7595N
–
Exposed terminals, stainless steel flange.
–
HBL7595
–
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) dia.
–
HBL7551
–
Exposed terminals, black nylon flange.
–
–
HBL7486N*
Exposed terminals, stainless steel flange.
–
–
HBL7486*
Note: See page B-6 for accessories.
*UL Listed only.
Male ML-2P devices have hollow center ground sleeves.
Male ML-3P devices have solid center neutral pins.
1.63"
(41.4)
1.38"
(35.1)
.16"
(4.1)
DIA.
W
.94"
(23.9)
1.06"
(26.9)
HBL7466, HBL7467
2.06"
(52.3)
1.75"
(44.5)
2.06"
(52.3)
1.75"
(44.5)
.15"
(3.8)
DIA.
1.00"
(25.4)
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
1.00"
(25.4)
2.06"
(52.3)
1.75"
(44.5)
.15"
(3.8)
DIA.
1.00"
(25.4)
.16"
(4.1)
DIA.
1.00"
(25.4)
1.28"
(32.5)
1.22"
(31.0)
1.27"
(32.3)
1.22"
(31)
HBL7595N
HBL7595
HBL7486N
HBL7486
Dimensions in Inches (mm)
B-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Ampere, 125 and 125/250 Volts
Midget Twist-Lock® Connector Bodies and Flanged Receptacles
X
IP20
W
SUITABILITY
Y
Connector Bodies
15A 125V
NEMA ML-1R
Description
Cord Dia.
Catalog Number
Valise® connector body, black nylon,
polarized.
.220"-.385"
(5.6-9.8)
HBL7464V*
Valise® connector body, black nylon,
insulation displacement terminals.
.300"-.430"
(7.6-10.9)
Black nylon cover, phenolic body,
screw terminals.
Angle connector body, black nylon
cover, phenolic body, screw terminals.
15A 125V
NEMA ML-2R
1.77"
(45.0)
15A 125/250V
NEMA ML-3R
–
–
–
HBL7593V
–
.281"-.421"
(7.1-10.7)
–
HBL7593
–
.335"-.421"
(8.5-10.7)
–
HBL7571
–
Valise® type, black nylon, with
.300"-.430"
insulation displacement terminals, multiple (7.6-10.9)
drive screws.
–
–
HBL7484V*
Black nylon body, phenolic base,
multiple drive screws, cord grip.
.281"-.421"
(7.1-10.7)
–
–
HBL7484*
Same as above, except for angle
cord grip.
.335"-.421"
(8.5-10.7)
–
–
HBL7433*
1.06"
(26.9)
.97"
(24.6)
HBL7464V
1.98"
(50.4)
1.19"
(30.2)
HBL7593V
2.42"
(61.5)
1.13"
(28.7)
1.17"
(29.7)
Flanged Receptacles
Description
Catalog Number
Stainless steel flange, exposed terminals.
HBL7468*
–
–
–
HBL7596N
–
Exposed terminals, black nylon flange.
HBL7593
Exposed terminals, stainless steel flange.
–
HBL7596
–
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) in dia.
–
HBL7598
–
Exposed terminals, black nylon flange.
–
–
HBL7487N*
Exposed terminals, stainless steel flange.
–
–
HBL7487*
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) in diameter.
–
–
HBL7489*
1.69"
(42.9)
1.28"
(32.5)
1.17"
(29.7)
HBL7571
Note: See page B-6 for accessories.
*UL Listed only.
Female ML-2R devices have solid center ground pins.
Female ML-3R devices have hollow center neutral sleeves.
1.97"
(50.0)
1.19"
(30.2)
HBL7484V
2.02"
(51.3)
1.17"
(29.7)
1.13"
(28.7)
HBL7484
2.06"
(52.3)
1.75"
(44.5)
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
.97"
(24.6)
.16"
(4.1)
DIA.
2.06"
(52.3)
1.75"
(44.5)
1.25"
(31.8)
1.00"
(25.4)
1.63"
(41.4)
1.38"
(35.1)
.15"
(3.8)
DIA.
1.17"
(29.7)
1.17"
(29.7)
1.14"
(29.0)
HBL7596
HBL7598
HBL7596N
.16"
(4.1)
DIA.
.78"
(19.8)
1.03"
(26.2)
HBL7468
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-5
Twist-Lock® Devices
Midget Twist-Lock® Accessories
Weatherproof Accessories
HBL7490V
Description
Catalog Number
Seal-tite® cover, black elastomer, for use with a HBL7465V plug when
used with a HBL7464V connector body or a HBL7464V connector
when used with a flanged inlet.
HBL7490V*
Seal-tite® cover, black elastomer, for use with a HBL7464V connector
body and combination of HBL7465V plug and HBL7490V cover.
HBL7459V*
Closure cover for use with HBL7466 or HBL7467.
Bead chain is nickel-plated.
HBL4890
Weatherproof Accessories
HBL7459V
Description
Catalog Number
Seal-Tite® cover, black elastomer, for use with a HBL7594V plug when
used with a HBL7593V connector body or a HBL7593V
connector body when used with a flanged inlet.
HBL7495V*
Seal-Tite® cover, black elastomer, for use with a HBL7593V connector
body and a combination of HBL7594V plug and HBL7495V cover.
HBL7440V*
Closure cover for use with HBL7595 or HBL7595N.
HBL4889
Weatherproof Accessories
HBL4890
Description
Catalog Number
Seal-Tite® cover, black elastomer, for use with a HBL7485V or
HBL7485 plug when used with a HBL7484V or HBL7484
connector body when used with a flanged inlet.
HBL7495V*
Seal-Tite® cover, black elastomer, for use with a HBL7484V or
HBL7484 connector body and a combination of HBL7485V or
HBL7485 plug and HBL7495V cover.
HBL7440V*
Closure cover for use with HBL7486 or HBL7486N.
HBL4889
Note: *IP55 suitability when installed and used properly with plug and connector body combinations.
HBL7495V
HBL7440V
HBL4889
Dimensions in Inches (mm)
B-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Insulgrip® 15 Ampere Plugs and Connector Bodies
Featuring Integral VARI-SIZE® Cord Grip
Individually molded face for each
blade configuration keeps debris
out of plug interior
Roomy wiring chamber provides
ample space for wiring
Powerful, cord grips clamp on
individual conductors and outer
cord jacket to prevent strain
on terminals
Individual wiring terminals
are completely enclosed
in their own separate
chambers
Ribbed nylon housing provides
a secure grip that’s impact and
chemical resistant
HBL4770C
Beveled housing prevents
snagging when dragged across
uneven surfaces
Integral VARI-SIZE® insert adjusts
to a wide range of cord sizes:
.230"-.720" (5.8-18.3).
Multiple drive screw heads provide
screwdriver versatility. Pocketed
recess for cord grip screws deters
slippage of the screwdriver.
VARI-SIZE® pointer set to “smaller
than gauge” position. Cord diameter
range is .230"-.360" (5.8-9.0).
Accepts slotted and Phillips
head drivers.
Transparent angled wiring entrance
holes permit “straight in” conductor
insertion and quick visual verification
for terminations.
Catalog number is visible on the
device while in use for easy
identification.
Powerful cord grips clamp on
individual conductors and outer
cord jacket to prevent strain on
terminations.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-7
Twist-Lock® Devices
15 Ampere Duplex Twist-Lock® Receptacles
Including Isolated Ground and Corrosion Resistant Devices
Brass mounting strap with
stainless steel grounding clip
Reinforced thermoplastic construction
Single piece, all brass contacts
All terminals are back and side wired
including the ground
Single point
break-off tabs
High performance internal wiring clamps and
open terminal design provide for the use of
forked terminals
HBL4700
Mounting strap tabs lock the body
and base together
Hubbell Wiring Device-Kellems line of duplex Twist-Lock®
receptacles are designed to deliver premium service and
longer life. This rugged product design establishes a new
standard for 15 amp locking receptacles. A reinforced
thermoplastic top and base encapsulates the brass alloy
contacts that are locked together for unequaled assembly
strength. Wiring and installation is simplified with back
and side wire terminations, integral wire restraints, and
combination head screws. The integral split circuit capability
offers flexibility. Available in 2 pole, 3 wire configurations
including isolated ground and corrosion resistant versions.
B-8
®
Benefits
s High impact and heat resistance provides maximum
safety and longer life.
s Superior spring characteristics for increased contact
force, secure connections and longer life.
s High-conductivity, corrosion resistant material for
reliable, low resistance to fault currents.
s Easy and reliable installation for stranded and solid wire.
s Features split circuit capability in the field.
s The assembly locks together to make the most abuse
resistant receptacle ever.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Ampere, 125 Volts
2 Pole, 2 Wire, Non-Grounding
IP20
SUITABILITY
W
15A 125V
NEMA L1-15P
UL Listed
0.5 HP
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon, polarized. Multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL7545C
1.53"
(38.9)
1.91"
(48.5)
Note: See page B-49 for accessories.
HBL7545C
Flanged Inlets
Description
Catalog Number
Nylon casing, polarized, backwired, Multiple drive screws.
HBL7524C
2.56"
(65.0)
2.19"
(55.6)
Note: See page B-48 for accessories.
W
15A 125V
NEMA L1-15R
UL Listed
0.5 HP
Connector Bodies
Description
Cord Dia.
Catalog Number
Black and white nylon. Multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL7506C
.16"
(4.1)
DIA.
1.69"
(42.9)
1.72"
(43.7)
HBL7524C
Note: See page B-49 for accessories.
2.78"
(70.6)
Receptacles
Description
Catalog Number
Duplex, flush, black phenolic.
HBL7540
Single, flush, black phenolic.
HBL7535
Single, panel mount, 1¹⁵₁₆" (49.2) centers, black phenolic.
HBL7498
1.53"
(38.9)
1.41"
(35.8)
HBL7506C
Note: See pages B-48 and B-49 for accessories.
1.00"
(25.4)
Flanged Receptacles
Description
Catalog Number
Insulgrip nylon casing, backwired. Multiple drive screws.
HBL7526C
Metal flange, stainless steel casing, black phenolic,
exposed terminals.
HBL7526
3.28"
(83.3)
2.75"
(69.9)
#6-32
TAP
1.53"
(38.8)
Note: See pages B-48 and B-49 for accessories.
Only receptacles and plugs are HP rated.
HP ratings are AC only.
1.11"
(28.2)
1.33"
(33.8)
1.19"
(30.2)
HBL7540
2.56"
(65.0)
2.19"
(55.6)
.16"
(4.1)
DIA.
1.69"
(42.9)
1.00"
(25.4)
1.00"
(25.4)
#8-32TAP
1.63"
(41.4)
1.94" 1.39"
(49.3) (35.3)
1.63"
(41.4)
3.28" 2.38" 1.39"
(83.3) (60.5) (35.3)
#6-32 TAP
1.72"
(43.7)
HBL7526C
1.39"
(35.3)
1.19"
(30.2)
HBL7498
1.19"
(30.2)
HBL7535
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-9
Twist-Lock® Devices
15 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
W
G
IP20
1.91"
(48.5)
SUITABILITY
1.53"
(38.9)
HBL4720C
1.22"
(30.9)
2.11"
(53.6)
1.53"
(38.9)
HBL4720CA
2.63"
(66.8)
Plugs
W
X
G
G
Y
15A 125V
NEMA L5-15P
UL/CSA
0.5 HP
15A 250V
NEMA L6-15P
UL/CSA
1.5 HP
15A 277V AC
NEMA L7-15P
UL/CSA
2 HP
Description
Cord Dia.
Catalog Number
Insulgrip plug, black and white nylon.
Multiple drive screws. Fed Spec WC596
.230"-.720"
(5.8-18.3)
HBL4720C
All black nylon.
.230"-.720"
(5.8-18.3)
HBL4720CBK
Insulgrip angle plug, 8 position angle,
black and white nylon. Multiple
drive screws.
.325"-.655"
(8.3-16.6)
HBL4720CA
Insulgrip plug, corrosion resistant,
yellow and white nylon. Multiple
drive screws. Fed Spec WC596
.230"-.720"
(5.8-18.3)
HBL47CM20C HBL45CM70C HBL47CM70C
Elastogrip® plug, yellow elastomer,
dust tight.
300"-.655"
(7.6-16.6)
HBL2447
–
–
Elastogrip plug, yellow elastomer,
water/dust tight.
300"-.655"
(7.6-16.6)
HBL24W47
–
–
Valise® plug, yellow nylon.
.220"-.660"
(5.6-16.8)
HBL4723VY
Valise® plug, black nylon.
.220"-.660"
(5.6-16.8)
HBL4723VBK HBL4573VBK HBL4773VBK
HBL4570C
HBL4770C
–
–
HBL4570CA
HBL4573VY
HBL4770CA
HBL4773VY
Note: See page B-49 for accessories.
1.56"
(39.6)
HBL24W47
1.88"
(47.8)
1.50"
(38.1)
Flanged Inlets
Description
Catalog Number
Insulgrip flanged inlet, nylon casing,
back wired.
HBL4716C
HBL4586C
HBL4786C
Stainless steel casing, brown phenolic.
HBL4716*
HBL4586*
HBL4786*
Corrosion resistant, stainless steel
casing, yellow melamine.
HBL47CM16*
–
–
Note: See page B-48 for accessories.
HP ratings are AC only.
Only plugs are HP rated.
See page B-69 for technical information on Insulgrip devices.
*These flanged inlets will not accept Valise® connector bodies.
HBL4723VY
2.56"
(52.3)
2.19"
(55.6)
.16"
(4.1)
DIA.
1.72"
(43.7)
1.69"
(42.9)
HBL4716C
2.31"
(58.7)
1.94"
(49.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
1.09"
(27.7)
1.50"
(38.1)
HBL4716
Dimensions in Inches (mm)
B-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
G
W
X
G
IP20
SUITABILITY
Connector Bodies
Cord Dia.
Catalog Number
Insulgrip connector body, black and
white nylon. Multiple drive screws.
All black nylon.
.230"-.720"
(5.8-18.3)
.230"-.720"
(5.8-18.3)
.325"-.655"
(8.3-16.6)
HBL4729C
Valise® connector body, black nylon.
2.78"
(70.6)
Y
15A 125V
NEMA L5-15R
UL/CSA
Description
Insulgrip connector body, 8 position
angle, black and white nylon.
Multiple drive screws.
Insulgrip connector body, corrosion
resistant, yellow and white nylon.
Multiple drive screws.
Elastogrip connector body, yellow
elastomer, dust tight.
Elastogrip® connector body, yellow
elastomer, water/dust tight.
Valise® connector body, yellow nylon.
W
G
15A 277V AC
NEMA L7-15R
UL/CSA
15A 250V
NEMA L6-15R
UL/CSA
1.41"
(35.8)
1.53"
(38.9)
HBL4579C
HBL4779C
HBL4729CBK
–
–
HBL4729C
HBL4729CA
–
–
1.75"
(44.5)
.230"-.720"
(5.8-18.3)
HBL47CM29C HBL45CM79C HBL47CM79C
.300"-.655"
(7.6-16.6)
.300"-.655"
(7.6-16.6)
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
HBL2547
–
–
HBL25W47**
–
–
HBL4729VY
HBL4579VY
4.00"
(101.6)
HBL25W47
2.59"
(65.8)
HBL4779VY
1.50"
(38.1)
HBL4729VBK HBL4579VBK HBL4779VBK
Note: See page B-49 for accessories.
HBL4729VY
Receptacles
Description
Catalog Number
Duplex, flush, brown RTP face, back and side wired.
Duplex, flush, ivory RTP face, back and side wired.
Duplex, ring terminal connection.
Duplex, isolated ground, flush, orange RTP face,
back and side wired.
Duplex, corrosion resistant, yellow RTP face,
back and side wired.
Single, flush, black nylon face, back and side wired.
Same as HBL4760 without mounting screws, ears.
Terminal screws backed out, back and side wired.
Single, ring terminal connection.
Single, isolated ground, flush, orange nylon face,
back and side wired.
Single, black nylon face mounted on a
4" (101.6) round box cover, back and side wired.
Single, panel mount, black nylon face, side wired
only, 1.75" or 1.937" (44.5 or 49.2) mounting centers.
HBL4700*
HBL4700I*
HBL4700RT*
IG4700A*
HBL47CM00*
HBL4550*
–
HBL4550RT*
IG4550A*
1.70"
(43.2)
HBL4750*
–
–
–
3.28"
(83.3)
–
–
HBL4710
–
HBL4560
–
HBL4760
HBL4760C
HBL4710RT
IG4710
HBL4560RT
IG4560
–
–
2.735"
(69.5)
HBL4700
HBL4711
–
HBL4761
HBL4713
HBL4563
HBL4763
Note: See pages B-48 and B-49 for accessories.
1.27"
(32.3)
3.28"
(83.3)
2.38" 1.38"
(60.5) (35.1)
Flanged Receptacles
Description
Catalog Number
Insulgrip flanged receptacle, nylon casing,
back wired.
Stainless steel casing, brown phenolic.
Corrosion resistant, stainless steel casing,
yellow melamine.
HBL4715C
HBL4585C
HBL4785C
HBL4715
HBL47CM15
HBL4585
–
HBL4785
–
Note: See pages B-48 and B-49 for accessories.
HP ratings are AC only.
RTP is an abbreviation for reinforced thermoplastic polyester.
See section M for additional information on isolated ground devices.
*Supplied with break-off tabs for split circuit wiring.
**Watertight connector body IP55 suitability when closure plug is
inserted or when installed and used properly with watertight plug.
2.56"
(65.0)
2.19"
(55.6)
2.31"
(58.7)
1.94"
(49.3)
.16"
(4.1)
DIA.
HBL4710
1.75"
(44.5)
.16"
(4.1)
DIA.
1.72"
(43.7)
1.36"
(34.5)
1.50"
(38.1)
HBL4715
1.69"
(42.9)
HBL4715C
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-11
Twist-Lock® Devices
20 and 30 Ampere Plugs and Connector Bodies
Features and Benefits
Improved terminations include
#10 multiple drive screws and
thicker .080" clamping nuts
Insulated nylon construction to
keep non-current carrying parts
from becoming energized
Funneled holes to permit “straightin” conductor insertion
Self-threading screws
specially designed for
secure assembly
Tough ribbed nylon housing
for secure gripping
Two-part cord grip tightens with
two screws for maximum retention
force. Broad gripping area to
accommodate wide range of
cable diameters
HBL2311
Integral dust shield protects
wiring chamber from dust or
contaminants. Single-piece
shield/housing eliminates need
for separate step at installation
Wiring chambers separate and
positively insulate conductors
and promote easy inspection
Product identification is visible while
device is in use. Markings include
catalog number and ratings printed in
the IEC color scheme on the currentcarrying portion of the device
HBL2313
Our 20 and 30 amp Insulgrip® plugs and connectors
maintain Hubbell’s classic integrity, solid construction
and safety features that make these devices the ‘industry
standard’.
Insulgrip’s cord gripping design clamps the conductors, not
just the cable jacket, making it the industry’s most powerful
cord grip. The restyled cord grips provide a clean, one-piece
look, and actually make it stronger.
Insulgrip’s design guards against contamination.
The nylon body and housing of the plugs and connectors
are resistant to industrial chemicals, solvents and
hydrocarbons. The face of each plug is molded specific
B-12
®
to the blade configuration, eliminating holes that attract
debris. And finally, our dust shield provides additional
protection from contamination.
Additional features that make Insulgrip the industry standard
are our improved contacts that provide better terminations,
an exclusive double rivet design for the female contacts and
an easy to read identification system.
The Hubbell Twist-Lock® line of plugs and connectors
remain the broadest in the industry. Hubbell has you
covered – proven performance, innovation and selection.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
The Standard for Locking Receptacles
Features and Benefits
Face color coding by voltage facilitates
locating and mating of proper devices
All-brass mounting and grounding
system provides a lower resistance
ground path and greater resistance to
corrosion than steel mounting systems
High-impact, abuse-resistant
nylon face
Boss diameter is 1.562"
on 20 and 30A devices for
simplifying installation and
accessory selection
Wire restraint recess
for both back and side
wiring, greatly reduces the
possibility of loosening
the terminal connection
Glass-Reinforced thermoplastic
polyester base (RTP) has the
desirable characteristics of a
thermoset material, including
heat, flame resistance and
dimensional stability. The
impact resistance it provides,
however, is much greater than
that of a thermoset
HBL2310
#10 silicon bronze terminal screw provides
greater strength and resistance to corrosion
and stripping. Anti-rotational clamp has a
stop to limit the amount of cocking when
only one side is used. Accommodates both
back and side wiring
One-piece contact with long
spring arm (low stress) and oxide
cutting nibs: prevents stress and
overheating associated with riveted
contact and short spring arms
Twist-Lock® receptacles combine functional design features,
unparalleled quality to deliver pace-setting performance.
The high-impact nylon face of each Hubbell Twist-Lock
receptacle has a colored ring. Keyed to an internationally
recognized color coding scheme, this ring enables mating
devices to be matched quickly. It's just one more example
of user-oriented thinking at Hubbell.
The terminals in each Hubbell Twist-Lock receptacle are
mechanically and electrically the finest available. These
terminals incorporate unique design features to contain
and hold conductors, including an external back wiring
“wraparound” clamp, a wire restraint recess and more.
The materials used in every receptacle are of the highest
quality. The all brass mounting system provides a safer,
lower resistance ground path than those made of steel.
The thick wall base is constructed of an engineered
thermoplastic to offer the benefits of a thermoset, yet with
much greater impact resistance.
Hubbell Twist-Lock Receptacles: Voltage color coding on
the outside. Proven designs and quality materials on the
inside. Any way you look at them, they are the standard
of the industry.
125V
www.hubbell-wiring.com
250V
®
277V AC
480V AC
Wiring Device-Kellems
600V AC
125/250V
B-13
Twist-Lock® Devices
Watertight Safety-Shroud® Twist-Lock® System
Features and Benefits
Catalog number and color-coded
voltage rating are easily visible
even when in use
Closure cap is included for environmental
seal when device is not in use
Alignment arrows and lock and unlock
symbols provide a visual indication that
devices are properly connected
One-piece, engineered
thermoplastic housing
is impact-resistant for
heavy-duty industrial
environments
External keying
provides
quick mating
of devices
All screws are #10
multiple drive head
Cord grip screw recess
minimizes screwdriver
slippage
HBL2733SW
Blades are recessed
for protection against
bending and breaking
HBL2731SW
One-step automatic Thermoplastic
Elastomer (TPE) seal and engineered
thermoplastic guard assure sealing
when device is fully connected
Note: Works with Mechanical Interlocks, see page B-39 for additional information.
B-14
TPE Gland Seal
Assorted glands accommodate a wide range
of cord sizes from #16-3 Type SJ to #8-5
Type S, SO
Spring-Loaded Cover
One-step push-to-close spring-loaded cover
with latch allows for fast opening and closing
of lift cover. Result: environmental sealing is
assured
Panel or Box Mount Receptacles
and Inlets
s High impact, thermoplastic housing for
heavy-duty industrial environments.
s Catalog number and color-coded
voltage rating are easily visible when
in use.
s Stainless Steel 302/304, #10 multiple
drive head mounting screws provide
corrosion resistance.
s Mounting screw recesses minimize
screwdriver slippage.
s Lockout/tagout hole on inlets allow
compliance to OSHA regulation 29
CFR 1910.147.
s TPE closure cap provided with inlets
for environmental seal when not in use.
s Accepts all mating NEMA locking plugs
and most connector bodies, allowing
interchangeability with existing devices.
Safety-Shroud
s Virtually eliminates bent and broken plug
blades, leading to longer equipment life.
s Extends life of mating receptacles by
eliminating damage caused by insertion
of bent blades.
s Extra protection for personnel by
significantly reducing chance of
inadvertent contact with blades when
connecting or disconnecting energized
receptacles and connector bodies.
s Reduces exposure to arcing when
connecting or disconnecting plugs
under load.
s Compliance with California Code of
Regulations, Title 8, Article 51, subsection
2510.7(b), which requires shrouding for
devices exceeding 300 volts.
s Lockout/tagout hole allows compliance
with OSHA regulation 29 CFR 1910.147.
s Sealing gland and thermoplastic guard
assure sealing when fully connected.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Safety-Shroud® Twist-Lock® System
Features and Benefits
Alignment arrows with lock and unlock
symbols provide a visual indication that
devices are properly connected
Catalog number and
color-coded voltage
rating are visible even
when in use
Accepts conventional
NEMA locking plugs
HBL2611S
Impact resistant shroud made
of engineered thermoplastic
protects blades against bending
or breaking
External keying on plug
devices allows quick
mating of devices
Note: All screws are #10 multiple drive head.
Lockout/tagout hole
allows compliance with
OSHA regulation 29
CFR 1910.147
Engineered thermoplastic housing is impact
and corrosion resistant, making it suitable for
heavy-duty industrial environments
HBL2610SR
Safety-Shroud® Plug Features and Benefits
s0DWHVZLWKPRVW1(0$ORFNLQJ
connector bodies.
s9LUWXDOO\HOLPLQDWHVEHQWDQGEURNHQ
plug blades.
s3URYLGHVSURWHFWLRQIRUSHUVRQQHOE\
reducing chance of inadvertent contact with
blades when connecting or disconnecting
energized devices.
s5HGXFHVH[SRVXUHWRDUFLQJZKHQ
connecting or disconnecting under load.
s([WHQGVOLIHRIPDWLQJUHFHSWDFOHVE\
eliminating damage caused by insertion of
bent blades.
s&RPSOLHVZLWK&DOLIRUQLD&RGHRI5HJXODWLRQ
which requires shrouding for devices
exceeding 300 volts.
s/RFNRXWWDJRXWKROHDOORZVFRPSOLDQFHWR
OSHA regulation 29 CFR 1910.147.
s$OORZVHQJDJHPHQWZLWK0HFKDQLFDO,QWHUORFN
Enclosure which virtually prevents make and
break under load.
Safety-Shroud® Twist-Lock® Receptacles (Recommended Installations)
The Safety-Shroud Twist-Lock single gang receptacles
were designed to mount in virtually all standard and
FS/FD type boxes, allowing easy conversion of
existing NEMA locking receptacles to Safety-Shroud
Twist-Lock Receptacles.
The semi-flush receptacles install in (RACO type
242/255) boxes, with ½ raised 2-gang device mount
covers (RACO type 778/841) and a 2-gang FD type
box. Standard 4" and 4¹¹⁄₁₆" square boxes 2¹⁄₈" deep.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-15
Twist-Lock® Devices
Compatibility and Environmental Protection Chart
Watertight Safety-Shroud®, Safety-Shroud® and NEMA Devices
Twist-Lock®
Twist-Lock®
Connector Bodies
Receptacles
Watertight SafetyWatertight
Shroud Mechanical
Safety-Shroud Interlock Enclosure
Safety-Shroud
Switched
Enclosure
NEMA
Watertight
Safety-Shroud
Insulgrip
Twist-Lock® Plugs
YES
Type 4X,
Type 12
YES
Type 4X,
Type 12K
YES
Type 1
NO
NO
YES
Type 4X,
Type 12
YES
Type 1
Safety-Shroud
YES
Type 1
YES
Type 1
YES
Type 1
NO
NO
YES
Type 1
YES
Type 1
Insulgrip
YES
Type 1
NO
YES
Type 1
YES
Type 3R
YES
Type 1
YES
Type 1
YES
Type 1
NEMA
NA
NA
NA
NA
NA
NO
YES
Type 1
Watertight Safety-Shroud
NA
NA
NA
NA
NA
YES
Type 4X,
Type 12
YES
Type 1
Watertight Safety-Shroud
Twist-Lock® Inlets
Type
Type
Type
Type
Type
YES
NO
NA
1
3R
4X
12
12K
Indoor
Raintight
Hose-directed water and corrosion resistant
Dust tight, drip-proof without knockouts
Dust tight, drip-proof with knockouts
Interchangeable
Does not interchange
Not Applicable
Note: See Technical section for full description of enclosure types.
B-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 250 Volts
2 Pole, 2 Wire, Non-Grounding
20A 250V
NEMA L2-20P
UL Listed
2 HP
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon, polarized. Multiple drive screws.
.220"-.720"
(5.6-18.3)
HBL7102C
1.91"
(48.5)
1.53"
(38.9)
Note: See page B-49 for accessories.
HBL7102C
2.56"
(65.0)
2.19"
(55.6)
Flanged Inlets
Description
Catalog Number
Nylon casing, back wired, polarized. Multiple drive screws.
HBL8815C
Note: See page B-48 for accessories.
.16"
(4.1)
DIA.
1.72"
(43.7)
1.69"
(42.9)
HBL8815C
20A 250V
NEMA L2-20R
UL Listed
2 HP
Connector Bodies
Description
Cord Dia.
Catalog Number
Black and white nylon. Multiple drive screws.
.220"-.720"
(5.6-18.3)
HBL7101C
2.78"
(70.6)
1.41"
(35.8)
1.53"
(38.9)
Note: See page B-49 for accessories.
HBL7101C
Receptacles
Description
Catalog Number
Single, black phenolic.
HBL7210B
Single, mounted on 4" (101.6) round box cover,
black phenolic.
HBL7217B
Note: See pages B-48 and B-49 for accessories.
1.30"
(33.0)
1.41"
(35.8)
1.39" 2.38" 3.28"
(35.3) (60.5) (83.3)
2.09"
(53.1)
Flanged Receptacles
Description
Catalog Number
Insulgrip nylon casing, back wired. Multiple drive screws.
HBL8809C
Metal flange, stainless steel casing, black phenolic,
exposed terminals.
HBL3226
1.11"
(28.2)
#6-32 TAP
HBL7210B
2.56"
(65.0)
Note: See pages B-48 and B-49 for accessories.
Only receptacles and plugs are HP rated.
HP ratings are AC only.
2.19"
(55.6)
.16"
(4.1)
DIA.
1.72"
(43.7)
1.69"
(42.9)
HBL8809C
1.88"
(47.8)
.16"
(4.1)
DIA.
1.83"
(46.4)
1.42"
(36.1)
HBL3226
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-17
Twist-Lock® Devices
20 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
W
X
G
G
Y
20A 125V
NEMA L5-20P
UL/CSA
1 HP
Plugs
Watertight Safety-Shroud®
2.78"
(70.6)
4.50"
(114.3)
20A 250V
NEMA L6-20P
UL/CSA
2 HP
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.360"-.930"
(9-24)
HBL2311SW
Description
Cord Dia.
Catalog Number
Black and white nylon body,
white Valox® shroud. Can be used
with the Insulgrip Connector Bodies.
.360"-.930"
(9-24)
HBL2311S
2.26"
(57.4)
2.04"
(51.8)
IP20
HBL2331SW
SUITABILITY
HBL2321S
HBL2331S
Note: See page B-40 for accessories.
Insulgrip®
3.97"
(100.8)
HBL2321S
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
IP20
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2311
HBL2321
Corrosion resistant,
yellow nylon.
.360"-.930"
(9-24)
HBL23CM11
HBL23CM21
–
All black nylon.
.360"-.930"
(9-24)
HBL2311BK
HBL2321BK
–
Cord clamps with removable
nserts. All black nylon.
.360"-.930"
(9-24)
HBL2311EBK
HBL2321EBK
–
Valise®
2.50"
(63.5)
1.78"
(45.2)
HBL2311VY
HBL2331
IP20
Description
Cord Dia.
Catalog Number
Yellow nylon.
.325"-.720"
(8.26-18.3)
HBL2311VY
Corrosion resistant,
yellow nylon.
.325"-.720"
(8.26-18.3)
HBL23CM11V
Black nylon.
.325"-.720"
(8.26-18.3)
HBL2311VBK
SUITABILITY
HBL2321VY
HBL2331VY
–
–
HBL2321VBK
HBL2331VBK
Note: See page B-51 for accessories.
2.28"
(57.9)
Flanged Inlets
Watertight Safety-Shroud®
Description
3.75"
(95.3)
1.63"
(41.4)
IP66 SUITABILITY
Gray Valox® housing and flange,
reverse service (Not shown).
HBL2315SW
HBL2325SW
–
HBL2325SWR
HBL2325SW
2.88"
(73.2)
.19"
(4.8)
DIA.
120°
120°
HBL2335SW
–
Note: See page B-54 for accessories.
Insulgrip®
3.75"
(95.3)
UL Type 4x, 12
Catalog Number
Gray Valox® housing and flange.
1.25" R.
(31.8)
SUITABILITY
Note: See page B-51 for accessories.
HBL2311
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2315
SUITABILITY
HBL2325
HBL2335
Note: See page B-50 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
See page B-74 for technical information on Valise® plugs and connectors.
2.09"
(53.1)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
2.04"
(51.8)
HBL2315
Dimensions in Inches (mm)
B-18
UL Type 4x, 12
HBL2321SW
Safety-Shroud®
HBL2321SW
20A 277V AC
NEMA L7-20P
UL/CSA
2 HP
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
W
X
G
W
G
G
Y
20A 125V
NEMA L5-20R
UL/CSA
1 HP
Connector Bodies
Watertight Safety-Shroud®
20A 250V
NEMA L6-20R
UL/CSA
2 HP
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.360"-.930"
(9-24)
HBL2313SW
Insulgrip®
20A 277V AC
NEMA L7-20R
UL/CSA
2 HP
UL Type 4x, 12
HBL2323SW
IP20
HBL2333SW
2.56"
(65.0)
4.38"
(111.1)
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2313
Corrosion resistant,
yellow nylon.
.360"-.930"
(9-24)
HBL23CM13
HBL23CM23
–
All black nylon.
.360"-.930"
(9-24)
HBL2313BK
HBL2323BK
–
Cord clamps with removable
inserts. All black nylon.
.360"-.930"
(9-24)
HBL2313EBK
HBL2323EBK
–
HBL2323
HBL2323SW
HBL2333
3.86"
(98.0)
2.26"
(57.4)
1.97"
(50.0)
HBL2313
Note: See page B-51 for accessories.
2.60"
(66.0)
Valise®
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Yellow nylon.
.325"-.720"
(8.26-18.3)
HBL2313VY
HBL2323VY
Black nylon.
.325"-.720"
(8.26-18.3)
HBL2313VBK
HBL2323VBK
–
1.78"
(45.2)
HBL2333VBK
HBL2313VY
Note: See page B-51 for accessories.
2.69"
(68.3)
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2310SW
UL Type 4x, 12
HBL2320SW
3.75"
(95.3)
HBL2330SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
3.75"
(95.3)
SUITABILITY
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2310AR
HBL2320AR
HBL2330AR
Gray Valox® surface mounting, one gang, back wired. HBL2310SR
HBL2320SR
HBL2330SR
Gray Valox® semi-flush, two gang, back wired.
HBL2320SR2
HBL2330SR2
HBL2310SR2
HBL2320SW
3.14"
(79.8)
Note: See page B-54 for accessories.
4.57"
(116.1)
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2310
HBL2320
Blue nylon face, back and side wired.
HBL2310M7
HBL2320M4
–
Isolated ground, orange nylon face,
back and side wired.
IG2310
IG2320
–
Corrosion resistant, yellow nylon face,
back and side wired.
HBL23CM10
Ring terminal connection.
HBL2310RT
HBL2330
–
2.88"
(73.2)
HBL2320AR
1.58"
(40.1)
–
HBL2320RT
–
Note: See page B-50 for accessories.
Insulgrip®
1.50"
(38.1)
4.56"
(115.8)
Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2316
HBL2326
HBL2336
Note: See page B-50 for accessories.
HBL2320SR
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
®
Wiring Device-Kellems
B-19
Twist-Lock® Devices
20 Ampere, 125/250, 3Ø 250 and 3Ø 480 Volts AC
3 Pole, 4 Wire Grounding
X
W
Plugs
4.50"
(114.3)
2.33"
(59.2)
X
G
Y
G
Z
Z
20A 125/250V AC
NEMA L14-20P
UL/CSA
2 (1) HP
20A 3Ø 250V AC
NEMA L15-20P
UL/CSA
3 HP
20A 3Ø 480V AC
NEMA L16-20P
UL/CSA
5 HP
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2411SW
Description
Cord Dia.
Catalog Number
Black and white nylon body,
white Valox® shroud. Can be
used with the Insulgrip
Connector Bodies.
.350"-1.150"
(9-29)
HBL2411S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2411
HBL2421
HBL2431
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL24CM11
HBL24CM21
HBL24CM31
All black nylon.
.350"-1.150"
(9-29)
HBL2411BK
HBL2421SW
Safety-Shroud®
HBL2421SW
2.21"
(56.1)
Y
Y
Watertight Safety-Shroud®
2.94"
(74.7)
X
G
IP20
HBL2431SW
SUITABILITY
HBL2421S
HBL2431S
Note: See page B-40 for accessories.
Insulgrip®
4.12"
(104.6)
HBL2421S
2.75"
(69.9)
IP20
2.33"
(59.2)
2.21"
(56.1)
SUITABILITY
–
–
Note: See page B-53 for accessories.
HBL2411
Flanged Inlets
Watertight Safety-Shroud®
2.44"
(62.0)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2415SW
UL Type 4x, 12
HBL2425SW
HBL2435SW
Note: See page B-54 for accessories.
3.75"
(95.3)
Insulgrip®
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2415
SUITABILITY
HBL2425
HBL2435
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
HBL2425SW
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
2.27"
(57.7)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
2.23"
(56.6)
HBL2415
Dimensions in Inches (mm)
B-20
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 125/250, 3Ø 250 and 3Ø 480 Volts AC
3 Pole, 4 Wire Grounding
X
X
G
Connector Bodies
W
G
X
Y
G
Y
Y
Z
Z
20A 125/250V AC
NEMA L14-20R
UL/CSA
2 (1) HP
20A 3Ø 250V AC
NEMA L15-20R
UL/CSA
3 HP
20A 3Ø 480V AC
NEMA L16-20R
UL/CSA
5 HP
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2413SW
Insulgrip®
UL Type 4x, 12
HBL2423SW
IP20
HBL2433SW
2.75"
(69.9)
4.38"
(111.1)
SUITABILITY
HBL2423SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2413
HBL2423
HBL2433
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL24CM13
HBL24CM23
HBL24CM33
All black nylon.
.350"-1.150"
(9-29)
HBL2413BK
–
3.86"
(98.0)
–
2.33"
(59.2 )
2.21"
(56.1)
Note: See page B-53 for accessories.
Receptacles
HBL2413
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2410SW
UL Type 4x, 12
HBL2420SW
2.91"
(73.9)
HBL2430SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
SUITABILITY
3.75"
(95.3)
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2410AR
HBL2420AR
Gray Valox® surface mounting, one gang, back wired.
HBL2410SR
HBL2420SR
HBL2430SR
Gray Valox® semi-flush, two gang, back wired.
HBL2410SR2
HBL2420SR2
HBL2430SR2
HBL2430AR
3.75"
(95.3)
Note: See page B-54 for accessories.
1.75"
(44.5)
HBL2420SW
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2410
HBL2420
Isolated ground, orange nylon face,
back and side wired.
IG2410
IG2420
–
Ring terminal connection.
HBL2410RT
HBL2420RT
–
3.14"
(79.8)
HBL2430
4.57"
(116.1)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2416
HBL2426
2.85"
(72.4)
HBL2436
HBL2420AR
Note: See page B-52 for accessories.
3.06"
(77.7)
1.70"
(43.2)
120°
1.23"
(31.2)
1.71"
(43.4)
.77"
(19.6)
1.34" R
(34.0)
.19"
(4.8) 120°
DIA.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
5.12"
(130.0)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
HBL2416
.98"
(24.9)
#6-32
TAP
HBL2410
5.12"
(130.0)
2.84"
(72.1)
HBL2420SR2
HBL2420SR
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-21
Twist-Lock® Devices
20 Ampere, 347, 480, 600 and 125/250 Volts AC
2 Pole, 3 Wire Grounding and 3 Pole, 3 Wire Non-Grounding
X
W
IP20
Y
20A 480V AC
NEMA L8-20P
UL/CSA
3 HP
20A 600V AC
NEMA L9-20P
UL/CSA
20A 125/250V AC
NEMA L10-20P
UL/CSA
2 (1) HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3721
HBL2341
HBL2351
–
Black and white nylon
(Not shown).
.300"-1.050"
(7.6-26.7)
–
–
–
HBL2361
HBL2345
HBL2355
HBL2365
2.26"
(57.4)
1.97"
(50.0)
G
Y
20A 347V AC
NEMA L24-20P
UL/CSA
Plugs
G
Y
SUITABILITY
2.75"
(69.9)
X
G
Note: See page B-51 for accessories.
HBL2341
Flanged Inlets
2.88"
(73.2)
120°
1.25" R.
(31.8)
.19" 120°
(4.8)
DIA.
Description
Catalog Number
Nylon casing, back wired.
HBL3725
Note: See page B-50 for accessories.
Connector Bodies
HBL2345
3.86"
(98.0)
2.26"
(57.4)
1.97"
(50.0)
G
G
G
SUITABILITY
2.04"
(51.8)
X
X
W
IP20
2.09"
(53.1)
Y
20A 347V AC
NEMA L24-20R
UL/CSA
Y
Y
20A 480V AC
NEMA L8-20R
UL/CSA
3 HP
20A 600V AC
NEMA L9-20R
UL/CSA
20A 125/250V AC
NEMA L10-20R
UL/CSA
2 (1) HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3723
HBL2343
HBL2353
–
Black and white nylon
(Not shown).
.300"-1.050"
(7.6-26.7)
–
–
–
HBL2363
HBL2340
Note: See page B-51 for accessories.
Single Flush Receptacles
HBL2343
1.70"
(43.2)
1.23"
(31.2)
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
Description
Catalog Number
Black nylon face, back and side wired.
HBL3720
HBL2350
HBL2360
Watertight Safety-Shroud®,
gray Valox® housing and flange,
back and side wired, (Not shown).
–
HBL2340SW
–
–
Isolated ground, orange nylon face,
back and side wired.
–
IG2340
–
–
HBL2356
HBL2366
Note: See page B-50 for accessories.
Flanged Receptacles
#6-32 TAP
.98"
(24.9)
HBL2340
Description
Catalog Number
Nylon casing, back wired.
HBL3726
HBL2346
Note: See page B-50 for accessories.
See page B-69 for technical information.
See page B-37 for switched enclosure.
See page B-40 for Add-A-Shroud® kit. For use with connector bodies.
Only receptacles and plugs up to 480V AC are HP rated.
HP ratings are AC only.
2.88"
(73.2)
120°
1.25" R.
(31.8)
120°
.19"
(4.8)
DIA.
2.09"
(53.1)
2.04"
(51.8)
HBL2346
Dimensions in Inches (mm)
B-22
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 4 Wire Non-Grounding
X
IP20
X
W
Y
Y
W
Z
Z
Z
20A 3ØY
120/208V AC
NEMA L18-20P
UL Listed
2 HP
20A 3ØY
277/480V AC
NEMA L19-20P
UL Listed
5 HP
20A 3ØY
347/600V AC
NEMA L20-20P
UL Listed
SUITABILITY
Plugs
X
W
Y
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2441
HBL2451
HBL2461
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Note: See page B-53 for accessories.
Flanged Inlets
HBL2441
Description
Catalog Number
Nylon casing, back wired.
HBL2445
HBL2455
HBL2465
3.06"
(77.7)
Note: See page B-52 for accessories.
120°
1.34" R
(34.0)
X
IP20
SUITABILITY
Connector Bodies
X
Y
W
W
X
Y
W
Y
Z
Z
Z
20A 3ØY
120/208V AC
NEMA L18-20R
UL Listed
2 HP
20A 3ØY
277/480V AC
NEMA L19-20R
UL Listed
5 HP
20A 3ØY
347/600V AC
NEMA L20-20R
UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2443
HBL2453
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2445
HBL2463
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Single Flush Receptacles
Description
Catalog Number
Black nylon face, back and side wired.
HBL2440
HBL2450
3.86"
(98.0)
HBL2460
HBL2443
Note: See page B-52 for accessories.
Flanged Receptacles
1.70"
(43.2)
Description
Catalog Number
Nylon casing, back wired.
HBL2446
HBL2456
1.23"
(31.2)
HBL2466
Note: See page B-52 for accessories.
See page B-69 for technical information.
See page B-37 for switched enclosure.
See page B-40 for Add-A-Shroud® kit. For use with connector bodies.
Only receptacles and plugs up to 480V AC are HP rated.
HP ratings are AC only.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
#6-32 TAP
.98"
(24.9)
HBL2440
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2446
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-23
Twist-Lock® Devices
20 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
Y
Plugs
G
4.50"
(114.3)
Y
G
W
20A 3ØY
120/208V AC
NEMA L21-20P
UL/CSA
2 HP
20A 3ØY
277/480V AC
NEMA L22-20P
UL/CSA
5 HP
20A 3ØY
347/600V AC
NEMA L23-20P
UL/CSA
IP66 SUITABILITY
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2511SW
Cord Dia.
Catalog Number
UL Type 4x, 12
–
IP20
.350"-1.150"
Black and white nylon body,
white Valox® shroud. Can be used (9-29)
with the Insulgrip Connector Bodies.
X
W
Z
Description
Description
G
Z
Safety-Shroud®
HBL2511SW
Y
Z
Watertight Safety-Shroud®
2.94"
(74.7)
X
W
HBL2511S
–
SUITABILITY
–
–
Note: See page B-40 for accessories.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
HBL2511S
2.75"
(69.8)
Insulgrip®
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2511
All black nylon.
.350"-1.150"
(9-29)
HBL2511BK
–
–
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL25CM11
–
–
Black and white for flat cable.
.350"-1.150"
(9-29)
HBL2511FC
–
–
HBL2521
HBL2531
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Flanged Inlets
HBL2511
Watertight Safety-Shroud®
2.44"
(62.0)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2515SW
UL Type 4x, 12
–
–
Note: See page B-52 for accessories.
Insulgrip®
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2515
SUITABILITY
HBL2525
HBL2535
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
1.81"
(46.0)
3.75"
(95.3)
HBL2515SW
3.06"
(77.7)
120°
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2515
Dimensions in Inches (mm)
B-24
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
W
Connector Bodies
X
G
Y
W
G
Y
Z
Z
20A 3ØY
120/208V AC
NEMA L21-20R
UL/CSA
2 HP
20A 3ØY
277/480V AC
NEMA L22-20R
UL/CSA
5 HP
20A 3ØY
347/600V AC
NEMA L23-20R
UL/CSA
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2513SW
Insulgrip®
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
HBL2513
UL Type 4x, 12
2.75"
(69.9)
–
IP20
Corrosion resistant,
yellow nylon.
Black and white for flat cable.
W
Y
Z
Watertight Safety-Shroud®
All black nylon.
X
G
–
4.38"
(111.1)
SUITABILITY
HBL2513SW
HBL2523
HBL2533
HBL2513BK
–
–
HBL25CM13
–
–
HBL2513FC
–
–
2.33"
(59.3)
2.21"
(56.1)
3.86"
(98.0)
Note: See page B-53 for accessories.
HBL2513
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2510SW
2.91"
(73.9)
UL Type 4x, 12
–
–
Note: See page B-54 for accessories.
3.75"
(95.3)
Safety-Shroud® Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
HBL2510AR
HBL2510SR
HBL2510SR2
SUITABILITY
–
–
–
–
–
–
1.75"
(44.5)
3.75"
(95.3)
HBL2510SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
Description
Catalog Number
Black nylon face, back and side wired.
Isolated ground, orange nylon face,
back and side wired.
HBL2510
IG2510
SUITABILITY
3.14"
(79.8)
HBL2520*
–
HBL2530*
–
4.57"
(116.1)
Note: *Not Fed Spec.
See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2516
HBL2526
HBL2536
2.88"
(73.2)
Note: See page B-52 for accessories.
HBL2510AR
1.70"
(43.2)
3.06"
(77.7)
120°
1.23"
(31.2)
1.34" R.
(34.0)
.19"
(4.8)
DIA.
5.12"
(130.0)
120°
4.56"
(115.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
1.71"
(43.4)
.77"
(19.6)
2.27"
(57.7)
2.23"
(56.6)
HBL2516
#6-32 TAP
5.12"
(130.0)
.98"
(24.9)
HBL2510
HBL2510SR2
HBL2510SR
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
®
Wiring Device-Kellems
B-25
Twist-Lock® Devices
30 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
X
W
G
G
Y
30A 125V
NEMA L5-30P
UL/CSA
2 HP
Plugs
Watertight Safety-Shroud®
2.78"
(70.6)
4.50"
(114.3)
HBL2611SW
Description
Cord Dia.
Catalog Number
.325"-.930"
(9-24)
HBL2611SW
Cord Dia.
Catalog Number
IP20
Description
2.26"
(57.4)
2.04"
(51.8)
IP66 SUITABILITY
Black Valox® housing,
white Valox® clamps.
Safety-Shroud®
.360"-.930"
Black and white nylon body,
white Valox® shroud. Can be used (9-24)
with the Insulgrip Connector Bodies.
30A 250V
NEMA L6-30P
UL/CSA
2 HP
30A 277V AC
NEMA L7-30P
UL/CSA
3 HP
UL Type 4x, 12
HBL2621SW
–
HBL2621S
–
SUITABILITY
HBL2611S
Note: See page B-40 for accessories.
Insulgrip®
3.97"
(100.8)
HBL2621S
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
HBL2621
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2611
HBL2621
Heat stabilized, gray nylon,
220° F (104° C).
.360"-.930"
(9-24)
HBL2611F
HBL2621F
–
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
HBL26CM11
HBL26CM21
–
All black nylon.
.360"-.930"
(9-24)
HBL2611BK
HBL2621BK
–
HBL2631
Note: See page B-51 for accessories.
Valise®
2.50"
(63.5)
IP20
Description
Cord Dia.
Catalog Number
Yellow nylon.
.590"-.930"
(15.0-23.6)
HBL2611VY
Corrosion resistant, yellow nylon.
.590"-.930"
(15.0-23.6)
HBL26CM11V
Black nylon.
.590"-.930"
(15.0-23.6)
HBL2611VBK
1.78"
(45.2)
HBL2611VY
SUITABILITY
HBL2621VY
–
–
–
HBL2621VBK
–
Note: See page B-51 for accessories.
2.28"
(57.9)
Flanged Inlets
Watertight Safety-Shroud®
3.75"
(95.3)
Description
Gray Valox® housing and flange.
1.63"
(41.4)
3.75"
(95.3)
IP66 SUITABILITY
Valox®
Reverse service, gray
housing
and flange (use with HBL2613SR),
(Not shown).
HBL2615SW
HBL2615SWR
Insulgrip®
2.88"
(73.2)
120°
1.25" R.
(31.8)
2.09"
(53.1)
HBL2625SW
–
–
–
Note: See page B-54 for accessories.
HBL2615SW
.19"
(4.8) 120°
DIA.
UL Type 4x, 12
Catalog Number
IP20
SUITABILITY
Description
Catalog Number
Nylon casing, back wired.
HBL2615
HBL2625
Heat stabilized, gray nylon, 220° F (104° C).
HBL2615F
HBL2625F
–
Nylon casing, weather protective, die cast
aluminum, back wired, self closing lift cover.
HBL2615M3
–
–
HBL2635
Note: See page B-50 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
See page B-74 for technical information on Valise plugs and connectors.
2.04"
(51.8)
HBL2625
Dimensions in Inches (mm)
B-26
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
X
W
G
W
G
G
Y
30A 125V
NEMA L5-30R
UL/CSA
2 HP
Connector Bodies
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
Reverse service, black Valox®
housing, white Valox® clamps (use
with HBL2615SWR), (Not shown).
.360"-.930"
(9-24)
.360"-.930"
(9-24)
HBL2613SW
HBL2613SR
Insulgrip®
30A 277V AC
NEMA L7-30R
UL/CSA
3 HP
30A 250V
NEMA L6-30R
UL/CSA
2 HP
UL Type 4x, 12
HBL2623SW
–
–
IP20
3.86"
(98.0)
Cord Dia.
Catalog Number
.360"-.930"
(9-24)
.360"-.930"
(9-24)
.360"-.930"
(9-24)
.360"-.930"
(9-24)
HBL2613
HBL2623
HBL2613F
HBL2623F
–
HBL26CM13
HBL26CM23
–
HBL2613BK
HBL2623BK
–
HBL2633
Note: See page B-51 for accessories.
IP20
Description
Cord Dia.
Catalog Number
Yellow nylon.
.590"-.930"
(15.0-23.6)
.590"-.930"
(15.0-23.6)
.590"-.930"
(15.0-23.6)
HBL2613VY
Corrosion resistant,
yellow nylon.
Black nylon.
HBL26CM13V
HBL2613VBK
HBL2613SW
SUITABILITY
Black and white nylon.
Valise®
4.38"
(111.1)
–
Description
Heat stabilized, gray nylon,
220° F (104° C).
Corrosion resistant,
yellow nylon.
All black nylon.
2.56"
(65.0)
2.26"
(57.4)
1.97"
(50.0)
HBL2623
2.60"
(66.0)
1.78"
(45.2)
SUITABILITY
HBL2623VY
–
–
–
HBL2623VBK
HBL2613VY
2.69"
(68.3)
–
3.75"
(95.3)
Note: See page B-51 for accessories.
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2610SW
UL Type 4x, 12
HBL2620SW
3.75"
(95.3)
HBL2610SW
–
Note: See page B-54 for accessories.
Safety-Shroud®
1.50"
(38.1)
3.14"
(79.8)
Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
HBL2610AR
HBL2610SR
HBL2610SR2
SUITABILITY
HBL2620AR
HBL2620SR
HBL2620SR2
–
–
–
4.57"
(116.1)
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
Blue nylon face, back and side wired.
Isolated ground, orange nylon face,
back and side wired.
Corrosion resistant, yellow nylon face,
back and side wired.
Ring terminal connection.
HBL2610
HBL2610M6
IG2610
HBL2620
HBL2620M6
IG2620
HBL2630
–
–
HBL26CM10
HBL26CM20
–
HBL2610RT
HBL2620RT
–
Note: See page B-50 for accessories.
2.88"
(73.2)
HBL2620AR
1.58"
(40.1)
4.56"
(115.8)
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
Heat stabilized, gray nylon, 220° F (104° C).
HBL2616
HBL2616F
HBL2626
HBL2626F
HBL2636
–
HBL2620SR
Note: See page B-50 for accessories.
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
®
Wiring Device-Kellems
B-27
Twist-Lock® Devices
30 Ampere, 125/250 and 3Ø 250 Volts AC
3 Pole, 4 Wire Grounding
X
W
30A 125/250V AC
NEMA L10-30P
UL/CSA
Plugs
Watertight Safety-Shroud®
2.94"
(74.7)
4.50"
(114.3)
Description
Cord Dia.
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
Cord Dia.
.350"-1.150"
Black and white nylon body,
white Valox® shroud. Can be used (9-29)
with the Insulgrip Connector Bodies.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
30A 3Ø 250V AC
NEMA L15-30P
UL/CSA
3 HP
IP66 SUITABILITY
–
UL Type 4x, 12
HBL2711SW
HBL2721SW
SUITABILITY
Catalog Number
–
HBL2711S
Insulgrip®
IP20
Description
Cord Dia.
Black and white nylon.
.350"-1.150"
(9-29)
.300"-.950"
(7.6-24.1)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
All black nylon.
2.75"
(69.9)
30A 125/250V AC
NEMA L14-30P
UL/CSA
2 (2) HP
HBL2721S
Note: See page B-40 for accessories.
Black and white nylon,
(Not shown).
Corrosion resistant, yellow nylon.
HBL2711S
Z
IP20
Description
G
Y
Catalog Number
Safety-Shroud®
HBL2711SW
X
Y
G
SUITABILITY
Catalog Number
–
HBL2711
HBL2661
HBL2721
–
–
–
HBL27CM11
–
HBL2711BK
HBL27CM21
–
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Flanged Inlets
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
HBL2711
Gray Valox® housing and flange.
Reverse service, gray Valox® housing and
flange (use with HBL2713SR), (Not shown).
2.44"
(62.0)
UL Type 4x, 12
Catalog Number
–
–
HBL2715SW
HBL2715SWR
HBL2725SW
–
Note: See page B-54 for accessories.
Insulgrip®
3.75"
(95.3)
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
Nylon casing, back wired, (Not shown).
–
HBL2665
Nylon casing, weather protective, die cast aluminum,
back wired, self closing lift cover.
–
SUITABILITY
HBL2715
–
HBL2715M3
HBL2725
–
–
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
HBL2715SW
.87"
(22.1)
1.47"
(37.3)
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
4.56"
(115.8)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles and reverse
service inlet, see page B-39.
2.27"
(57.7)
2.82"
(71.6)
2.23"
(56.6)
HBL2715M3
HBL2715
Dimensions in Inches (mm)
B-28
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 125/250 and 3Ø 250 Volts AC
3 Pole, 4 Wire Grounding
X
G
30A 125/250V AC
NEMA L10-30R
UL/CSA
Connector Bodies
Watertight Safety-Shroud®
Description
Black
housing,
white Valox® clamps.
Reverse service, black Valox®
housing, white Valox® clamps (use
with HBL2715SWR), (Not shown).
Z
30A 125/250V AC
NEMA L14-30R
UL/CSA
2 (2) HP
30A 3Ø 250V AC
NEMA L15-30R
UL/CSA
3 HP
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
–
HBL2713SW
–
HBL2713SR
Cord Dia.
Black and white nylon.
.350"-1.150"
(9-29)
.300"-.950"
(7.6-24.1)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
HBL2723SW
2.75"
(69.9)
–
4.38"
(111.1)
HBL2713SW
IP20
Description
All black nylon.
UL Type 4x, 12
Catalog Number
Insulgrip®
Black and white nylon,
(Not shown).
Corrosion resistant, yellow nylon.
Y
G
Y
IP66 SUITABILITY
Cord Dia.
Valox®
X
W
SUITABILITY
Catalog Number
HBL2713
HBL2663
HBL2723
–
2.33"
(59.2)
–
–
HBL27CM13
HBL27CM23
–
HBL2713BK
–
2.21"
(56.1)
3.86"
(98.0)
HBL2713
Note: See page B-53 for accessories.
2.91"
(73.9)
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
UL Type 4x, 12
Catalog Number
Gray Valox® housing and flange, back wired.
–
HBL2710SW
HBL2720SW
3.75"
(95.3)
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
SUITABILITY
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
–
–
–
HBL2710AR
HBL2710SR
HBL2710SR2
HBL2720AR
HBL2720SR
HBL2720SR2
HBL2710SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
Description
Catalog Number
Black nylon face, back and side wired.
Black nylon face, back and side wired, (Not shown).
Isolated ground, orange nylon face,
back and side wired.
Ring terminal connection.
–
HBL2660
–
–
1.75"
(44.5)
3.75"
(95.3)
3.14"
(79.8)
SUITABILITY
HBL2710
–
IG2710
HBL2720
–
IG2720
HBL2710RT
HBL2720RT
4.57"
(116.1)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
2.88"
(73.2)
Description
Catalog Number
–
Nylon casing, back wired.
HBL2710AR
HBL2716
HBL2726
Note: See page B-52 for accessories.
1.70"
(43.2)
3.06"
(77.7)
1.23"
(31.2)
1.71"
(43.4)
.77"
(19.6)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
4.56"
(115.8)
5.12"
(130.0)
2.27"
(57.7)
2.23"
(56.6)
HBL2716
5.12"
(130.0)
.98"
(24.9)
#6-32
TAP
HBL2710SR2
HBL2710
HBL2710SR
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
®
Wiring Device-Kellems
B-29
Twist-Lock® Devices
30 Ampere, 3Ø 480 and 3Ø 600 Volts AC
3 Pole, 4 Wire Grounding
X
X
Y
Plugs
Watertight Safety-Shroud®
2.94"
(74.7)
HBL2731SW
G
Z
Z
30A 3Ø 480V AC
NEMA L16-30P
UL/CSA
10 HP
30A 3Ø 600V AC
NEMA L17-30P
UL/CSA
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing, white Valox® clamps.
.350"-1.150"
(9-29)
HBL2731SW
Description
Cord Dia.
Catalog Number
Black and white nylon body, white Valox® shroud.
Can be used with the Insulgrip Connector Bodies.
.350"-1.150"
(9-29)
HBL2731S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2731
HBL2741
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL27CM31
HBL27CM41
Safety-Shroud®
4.50"
(114.3)
G
Y
IP20
HBL2741SW
SUITABILITY
HBL2741S
Note: See page B-40 for accessories.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
Insulgrip®
IP20
HBL2731S
SUITABILITY
Note: See page B-53 for accessories.
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Flanged Inlets
Watertight Safety-Shroud®
HBL2731
IP66 SUITABILITY
UL Type 4x, 12
Description
Catalog Number
Gray Valox® housing and flange.
HBL2735SW
HBL2745SW
Note: See page B-54 for accessories.
2.44"
(62.0)
Insulgrip®
3.75"
(95.3)
IP20
SUITABILITY
Description
Catalog Number
Nylon casing, back wired.
HBL2735
HBL2745
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
1.81"
(46.0)
3.75"
(95.3)
HBL2735SW
3.06"
(77.7)
120°
1.34" R.
(34.0)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
.19"
(4.8) 120°
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2735
Dimensions in Inches (mm)
B-30
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 3Ø 480 and 3Ø 600 Volts AC
3 Pole, 4 Wire Grounding
X
X
G
Connector Bodies
Watertight Safety-Shroud®
G
Y
Y
Z
Z
30A 3Ø 480V AC
NEMA L16-30R
UL/CSA
10 HP
30A 3Ø 600V AC
NEMA L17-30R
UL/CSA
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing, white Valox® clamps.
.350"-1.150"
(9-29)
HBL2733SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2733
HBL2743
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL27CM33
HBL27CM43
Insulgrip®
IP20
HBL2743SW
2.75"
(69.9)
SUITABILITY
4.38"
(111.1)
HBL2733SW
3.86"
(98.0)
Note: See page B-53 for accessories.
2.33"
(59.3)
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
UL Type 4x, 12
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2730SW
2.21"
(56.1)
HBL2733
HBL2740SW
2.91"
(73.9)
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
3.75"
(95.3)
SUITABILITY
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2730AR
HBL2740AR
HBL2730SR
HBL2740SR
HBL2730SR2
HBL2740SR2
Gray
Valox®
surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
Note: See page B-54 for accessories.
3.75"
(95.3)
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2730
1.75"
(44.5)
HBL2730SW
HBL2740
3.14"
(79.8)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2736
4.57"
(116.1)
HBL2746
Note: See page B-52 for accessories.
2.88"
(73.2)
HBL2730AR
1.70"
(43.2)
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
.77"
(19.6)
1.23"
(31.2)
5.12"
(130.0)
1.71"
(43.4)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
HBL2736
5.12"
(130.0)
.98"
(24.9)
#6-32
TAP
HBL2730SR2
HBL2730
HBL2730SR
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
®
Wiring Device-Kellems
B-31
Twist-Lock® Devices
30 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
Y
Plugs
G
4.50"
(114.3)
HBL2811SW
2.33"
(59.3)
HBL2811S
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Y
W
G
Z
30A 3ØY
120/208V AC
NEMA L21-30P
UL/CSA
3 HP
30A 3ØY
277/480V AC
NEMA L22-30P
UL/CSA
10 HP
30A 3ØY
347/600V AC
NEMA L23-30P
UL/CSA
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2811SW
Description
Cord Dia.
Catalog Number
Black and white nylon body, white
Valox® shroud. Can be used with
the Insulgrip Connector Bodies.
.350"-1.150"
(9-29)
HBL2811S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2811
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL28CM11
–
–
Black and white for flat cable.
.350"-1.150"
(9-29)
HBL2811FC
–
–
All black nylon.
.350"-1.150"
(9-29)
HBL2811BK
–
–
HBL2821SW
IP20
HBL2831SW
SUITABILITY
–
–
Note: See page B-40 for accessories.
Insulgrip®
4.12"
(104.6)
G
X
W
Z
Safety-Shroud®
2.21"
(56.1)
Y
Z
Watertight Safety-Shroud®
2.94"
(74.7)
X
W
IP20
SUITABILITY
HBL2821
HBL2831
Note: See page B-53 for accessories.
HBL2811
Flanged Inlets
2.44"
(62.0)
Watertight Safety-Shroud®
3.75"
(95.3)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2815SW
UL Type 4x, 12
–
–
Note: See page B-54 for accessories.
Insulgrip®
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2815
SUITABILITY
HBL2825
HBL2835
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
HBL2815SW
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8)
DIA.
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
120°
2.27"
(57.2)
2.23"
(56.6)
HBL2815
Dimensions in Inches (mm)
B-32
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
W
Connector Bodies
X
Y
G
W
X
W
Y
G
G
Y
Z
Z
Z
30A 3ØY
120/208V AC
NEMA L21-30R
UL/CSA
3 HP
30A 3ØY
277/480V AC
NEMA L22-30R
UL/CSA
10 HP
30A 3ØY
347/600V AC
NEMA L23-30R
UL/CSA
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2813SW
Insulgrip®
UL Type 4x, 12
HBL2823SW
IP20
2.75"
(69.9)
–
4.38"
(111.1)
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2813
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL28CM13
–
–
Black and white for flat cable.
.350"-1.150"
(9-29)
HBL2813FC
–
–
All black nylon.
.350"-1.150"
(9-29)
HBL2813BK
–
–
HBL2813SW
HBL2823
HBL2833
2.33"
(59.3)
2.21"
(56.1)
3.86"
(98.0)
HBL2813
Note: See page B-53 for accessories.
Receptacles
Watertight
2.91"
(73.9)
Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2810SW
UL Type 4x, 12
HBL2820SW
HBL2830SW
3.75"
(95.3)
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
SUITABILITY
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2810AR
–
–
Gray Valox® surface mounting, one gang, back wired.
HBL2810SR
–
–
HBL2810SR2
–
–
Gray
Valox®
semi-flush, two gang, back wired.
HBL2810SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
3.14"
(79.8)
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2810
Isolated ground, orange nylon face,
back and side wired.
IG2810
–
–
Ring terminal connection.
HBL2810RT
–
–
HBL2820
1.75"
(44.5)
3.75"
(95.3)
HBL2830
4.57"
(116.1
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
2.88"
(73.2)
Description
Catalog Number
Nylon casing, back wired.
HBL2816
HBL2810AR
HBL2826
HBL2836
Note: See page B-52 for accessories.
1.70"
(43.2)
3.06"
(77.7)
120°
1.23"
(31.2)
.77"
(19.6)
1.71"
(43.4)
1.34" R.
(34.0)
5.12"
(130.0)
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2816
4.56"
(115.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
#6-32 TAP
5.12"
(130.0)
.98"
(24.9)
HBL2810
HBL2810SR2
HBL2810SR
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
®
Wiring Device-Kellems
B-33
Twist-Lock® Devices
30 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 4 Wire Non-Grounding
X
IP20
Y
SUITABILITY
2.75"
(69.9)
Plugs
2.33"
(59.2)
2.21"
(56.1)
X
W
X
W
Y
W
Y
Z
Z
Z
30A 3ØY
120/208V AC
NEMA L18-30P
UL Listed
3 HP
30A 3ØY
277/480V AC
NEMA L19-30P
UL Listed
10 HP
30A 3ØY
347/600V AC
NEMA L20-30P
UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2751
HBL2761
HBL2771
HBL2765
HBL2775
Note: See page B-53 for accessories.
HBL2751
Flanged Inlets
3.06"
(77.7)
120°
Description
Catalog Number
Nylon casing, back wired.
HBL2755
Note: See page B-52 for accessories.
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
X
2.27"
(57.7)
IP20
SUITABILITY
2.23"
(56.6)
Connector Bodies
HBL2755
3.86"
(98.0)
X
Y
W
W
X
Y
W
Y
Z
Z
Z
30A 3ØY
120/208V AC
NEMA L18-30R
UL Listed
3 HP
30A 3ØY
277/480V AC
NEMA L19-30R
UL Listed
10 HP
30A 3ØY
347/600V AC
NEMA L20-30R
UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2753
HBL2763
HBL2773
HBL2760
HBL2770
HBL2766
HBL2776
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Single Flush Receptacles
HBL2753
1.70"
(43.2)
1.23"
(31.2)
Description
Catalog Number
Black nylon face, back and side wired.
HBL2750
Note: See page B-52 for accessories.
Flanged Receptacles
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
#6-32 TAP
.98"
(24.9)
Description
Catalog Number
Nylon casing, back wired.
HBL2756
Note: See page B-52 for accessories.
See page B-69 for technical information on Twist-Lock devices.
HBL2750
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2756
Dimensions in Inches (mm)
B-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 480 and 600 Volts AC
2 Pole, 3 Wire Grounding
X
X
IP20
G
G
SUITABILITY
Y
Y
30A 600V AC
NEMA L9-30P
UL/CSA
30A 480V AC
NEMA L8-30P
UL/CSA
5 HP
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.325"-.930"
(8.25-24)
HBL2641
HBL2651
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
Note: See page B-51 for accessories.
HBL2651
Flanged Inlets
Description
Catalog Number
Nylon casing, back wired.
HBL2645
2.88"
(73.2)
HBL2655
120°
Note: See page B-50 for accessories.
1.25" R.
(31.8)
120°
.19"
(4.8)
DIA.
IP20
G
G
SUITABILITY
Y
Y
2.04"
(51.8)
30A 600V AC
NEMA L9-30R
UL/CSA
30A 480V AC
NEMA L8-30R
UL/CSA
5 HP
Connector Bodies
2.09"
(53.1)
X
X
Description
Cord Dia.
Catalog Number
Black and white nylon.
.325"-.930"
(8.25-24)
HBL2643
HBL2655
3.86"
(98.0)
HBL2653
Note: See page B-51 for accessories.
2.26"
(57.4)
1.97"
(50.0)
Single Flush Receptacles
Description
Catalog Number
Black nylon face, back and side wired.
HBL2640
HBL2653
HBL2650
1.70"
(43.2)
Note: See page B-50 for accessories.
1.23"
(31.2)
Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2646
HBL2656
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
Note: See page B-50 for accessories.
See page B-69 for technical information on Twist-Lock devices.
#6-32 TAP
.98"
(24.9)
HBL2650
2.88"
(73.2)
120°
1.25" R.
(31.8)
.19"
(4.8)
DIA.
120°
2.09"
(53.1)
2.04"
(51.8)
HBL2656
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-35
Twist-Lock® Devices
Switched Safety Enclosures
Switched Twist-Lock® and Hubbellock® Enclosures
Horsepower rated switch
Lockable handle provides
lockout protection for greater
safety and complies with
OSHA lockout requirements
Angled 20 or 30 amp Hubbell Twist-Lock®
receptacle provides low profile and helps
control cable arc of bend
Large receptacle gasketless
door and hinge assembly
Premolded conduit entry hole is
offset to prevent water condensation
from falling directly on interior
electrical components, while
speeding installation by making it
easier to pull conductors
SETL3
Heavy-duty internal frame bonds
conduit and all grounds and has a
DIN rail to accommodate the switch
The Switched Twist-Lock® and Hubbellock® Enclosures
integrate a receptacle and a switch to produce distinct
advantages for the user. This enclosure replaces box,
switch, cover and all in a compact design that meets
Type 3R Rainproof or 12K Dust-tight requirements.
The receptacle is angled downward for a low profile, and
it maintains a low profile while accommodating either a
20 or 30 Amp Twist-Lock receptacle or 30 Amp, 4 wire
Hubbellock receptacle. The enclosure can be used in top,
bottom or back feed applications. The handle is designed
to be locked in the off position for lockout protection.
Hubbell has developed the Switched Safety Enclosure
because users want to be able to disconnect higher voltage
B-36
®
Moveable feet may be used in
horizontal or vertical position or may
be removed and premarked holes
drilled for Type 1 or 3R installations
devices confidently. Hubbell responded with a line of
Switched Safety Enclosures for Twist-Lock and Hubbellock
receptacles.
The provision of the integral switch and the receptacle in
a compact, non-metallic enclosure encourages the safe
operating practice of disconnecting at the switch rather
than the plug and receptacle.
For plants and factories in a wide variety of industries,
as well as light industrial facilities, Hubbell’s Switched
Enclosures offer an upgrade that’s convenient, compact
and easy to install.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Switched Safety Enclosures
Switched Twist-Lock® and Hubbellock® Enclosures
IP54
4.88"
(124.0)
SUITABILITY
UL Listed, CSA Certified
Type 3R and 12K Enclosure Rating
Switched Enclosure Ready for Twist-Lock® Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete enclosure ready to accept any
Hubbell 20 or 30A Twist-Lock receptacle.
Description
Ratings
Catalog Number
Amperage, voltage, and horsepower ratings will be
Switched Twist-Lock enclosure
accommodates any NEMA 2 pole, determined by the choice of the NEMA 20 or 30A
3 wire to 4 pole, 5 wire grounding Twist-Lock receptacle selected.
receptacle (sold separately).
SETL3
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
11.38"
(289.1)
4.5"
(114.3)
Switched Enclosure Complete with Twist-Lock® Receptacle
Completely pre-wired with a Twist-Lock receptacle, these application oriented combinations
are available to satisfy your needs.
Amps
Voltage
NEMA
Config.
Switched Twist-Lock
enclosure with a pre-wired
HBL2720 receptacle.
30
3Ø 240V AC
L15-30R
3
SE2720A
HBL2721
Switched Twist-Lock
enclosure with a pre-wired
HBL2730 receptacle.
30
3Ø 480V AC
L16-30R
10
SE2730A
HBL2731
Description
Switched
Horsepower Enclosure
SETL3
Use
Twist-Lock Plug
Switched Enclosure Ready for Hubbellock® Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete enclosure ready to accept your
30A, 4 wire Hubbellock receptacle choice.
Description
Ratings
Catalog Number
Switched enclosure for use with
3 pole 4 wire 30A Hubbellock
receptacle (sold separately).
Amperage, voltage, and horsepower ratings will be
determined by the choice of the 4 wire Hubbellock
receptacle selected.
SEHBL3
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
SE2720A
HBLAC1
Replacement Mounting Feet
HBLAC2
Description
Catalog Number
For 30A switches.
HBLRFT1'
Note: 'Package of 10 feet and 10 screws.
For technical information see page B-72.
HBLRFT1
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-37
Twist-Lock® Devices
Mechanical Interlock Switched Safety Enclosures
Circuit-Lock® Unfused Safety-Shroud® Twist-Lock®
Lockable handle provides
lockout protection for greater
safety and complies with
OSHA lockout requirements
Angled 20 or 30 amp Hubbell Watertight
Safety-Shroud® Twist-Lock® receptacle
provides watertight, low profile and
mechanical interlock capabilities
(ordered separately)
Heavy-duty interlock
linkage prevents make
and break under load
Enclosure back is
designed for top,
bottom or back
feed options
Horsepower
rated switch
HBLMITL
Heavy-duty internal frame bonds
conduit and all grounds and has a
DIN rail to accommodate the switch
Moveable feet may be used in
horizontal or vertical position or may
be removed and premarked holes
drilled for Type 1 or 3R installations
Hubbell offers the only mechanical interlock for
Twist-Lock®. This new, unfused mechanical interlock
for watertight Safety-Shroud® Twist-Lock® integrates a
watertight receptacle with a linked disconnect switch to
provide a mechanically interlocked receptacle. This virtually
eliminates the possibility of making or breaking the circuit
while under load or making a casual or “lazy” connection.
The switch cannot be turned “ON” until the plug is properly
inserted and locked, and the plug cannot be removed until
the switch is turned “OFF.” All these protective features are
included in a compact Type 4X hose-directed water and
B-38
®
Premolded conduit entry hole is offset to
prevent water condensation from falling
directly on interior electrical components,
while speeding installation by making it
easier to pull conductors
corrosion resistant enclosure that allows for top, bottom or
back feed options.
The non-metallic enclosure is nonconductive, yet has an
internal frame to assure ground continuity with metallic
conduit.
In addition, this interlock works with all Safety-Shroud
Twist-Lock Plugs. The new unfused mechanical interlock
for watertight Safety-Shroud Twist-Lock can be locked
out as a method of compliance with OSHA lockout/tagout
regulations.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Mechanical Interlock Switched Safety Enclosures
Circuit-Lock® Unfused Safety-Shroud® Twist-Lock®
3.19"
(81.0)
IP66
UL Listed, CSA Certified TYPE 4,
4X and TYPE 12K Enclosure Rating
4.88"
(124.0)
SUITABILITY
Mechanical Interlock Ready for Twist-Lock® Receptacle Addition
This unit is a complete enclosure ready to accept any 20 or 30A Watertight Safety-Shroud
Twist-Lock Receptacle.
Description
Ratings
Catalog Number
Mechanical Interlock
accommodates 20A or 30A
Watertight Safety-Shroud
Twist-Lock receptacles.
Amperage and voltage ratings will be determined
by the choice of the Watertight Safety-Shroud
Twist-Lock selected. Supplied with ¾" NPT Hub.
HBLMITL
11.44"
(290.6)
Accepts the following Watertight Safety-Shroud® Twist-Lock® Receptacles:
20A
NEMA
Config.
Max. HP
Rating*
Receptacle
Catalog Number
Use Watertight
Safety-Shroud
Twist-Lock Plug
Rating
Voltage AC
2 Pole, 3 Wire
120
L5-20
1
HBL2310SW
HBL2311SW
208-240
L6-20
2.5
HBL2320SW
HBL2321SW
3 Pole, 4 Wire
4 Pole, 5 Wire
277
L7-20
3
HBL2330SW
HBL2331SW
120/240
L14-20
2.5
HBL2410SW
HBL2411SW
240 3Ø
L15-20
5 ([email protected])
HBL2420SW
HBL2421SW
480 3Ø
L16-20
10
HBL2430SW
HBL2431SW
120/208 3ØY
L21-20
3
HBL2510SW
HBL2511SW
120
L5-30
1
HBL2610SW
HBL2611SW
208-240
L6-30
3
HBL2620SW
HBL2621SW
120/240
L14-30
3
HBL2710SW
HBL2711SW
240 3Ø
L15-30
7.5
HBL2720SW
HBL2721SW
480 3Ø
L16-30
15
HBL2730SW
HBL2731SW
600 3Ø
L17-30
15
HBL2740SW
HBL2741SW
120/208 3ØY
L21-30
7.5
HBL2810SW
HBL2811SW
277/480
L22-30
7.5
HBL2820SW
HBL2821SW
347/600
L23-30
7.5
HBL2830SW
HBL2831SW
L5-30
L14-30
L15-30
1
3
7.5
HBL2615SWR
HBL2715SWR
HBL2725SWR
HBL2613SR
HBL2713SR
HBL2723SR
4.19"
(106.4)
HBLMITL
30A
2 Pole, 3 Wire
3 Pole, 4 Wire
4 Pole, 5 Wire
HBL2620SW
HBL2713SR
30A Reverse Service
2 Pole, 3 Wire
3 Pole, 4 Wire
3 Pole, 4 Wire
120
120/240
240 3Ø
HBLAC1
Auxiliary Contacts
Description
Ratings
Catalog Number
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
HBLAC2
Replacement Parts
Description
Catalog Number
Ground block.
HBL30RGB
Neutral block.
HBL30RNB
Replacement switch.
HBLDS3RS
HBL30RGB
HBL30RNB
Replacement Mounting Feet
Description
Catalog Number
For 30A switches.
HBLRFT1'
Note: *HP ratings for the final unit are determined by the HP rating of the switch, limited by the full load current capability
of the receptacle at 80% of rated current, number of phases and line voltage. HP ratings listed above are AC only.
' Package of 10 feet and 10 screws.
See pages B-52 and B-53 for accessories.
See page B-73 for technical information.
www.hubbell-wiring.com
®
Wiring Device-Kellems
HBLRFT1
Dimensions in Inches (mm)
B-39
Twist-Lock® Devices
Safety-Shroud® Twist-Lock® Devices
ADD-A-SHROUD®
Safety-Shroud® Twist-Lock® – 20 and 30 Ampere
The Add-A-Shroud® devices allow conversion of existing 20A and 30A 3 to 5 wire Hubbell
Insulgrip® Twist-Lock devices to a Safety-Shroud Twist-Lock plug. These devices provide a
convenient and cost-effective way to convert existing Hubbell Insulgrip Twist-Lock plugs to SafetyShroud Twist-Lock plugs. The Safety-Shroud Twist-Lock plug permits engagement with the
Hubbell Mechanical Interlock Enclosure which virtually prevents make and break under load.
Add-A-Shroud® Catalog Number HBLSS3
For conversion of all 3 wire Hubbell Insulgrip Twist-Lock Devices.
Rating
Voltage AC
NEMA Config.
Plug
Reference Number Catalog Number
20A, 2 Pole 3 Wire Grounding
125V
L5-20
HBL2311
HBLSS3
250V
L6-20
HBL2321
HBLSS3
277V AC
L7-20
HBL2331
HBLSS3
480V AC
L8-20
HBL2341
HBLSS3
600V AC
L9-20
HBL2351
HBLSS3
125V
L5-30
HBL2611
HBLSS3
250V
L6-30
HBL2621
HBLSS3
277V AC
L7-30
HBL2631
HBLSS3
480V AC
L8-30
HBL2641
HBLSS3
600V AC
L9-30
HBL2651
HBLSS3
30A, 2 Pole 3 Wire Grounding
HBLSS3
Add-A-Shroud
Catalog Number
Add-A-Shroud® Catalog Number HBLSS45
For conversion of all 4 and 5 wire Hubbell Insulgrip Twist-Lock Devices.
Rating
Voltage AC
NEMA Config.
Plug
Reference Number Catalog Number
20A, 3 Pole 4 Wire Grounding
125/250V AC
L14-20
HBL2411
3Ø250V AC
L15-20
HBL2421
HBLSS45
3Ø480V AC
L16-20
HBL2431
HBLSS45
125/250V AC
L14-30
HBL2711
HBLSS45
3Ø250V AC
L15-30
HBL2721
HBLSS45
3Ø480V AC
L16-30
HBL2731
HBLSS45
3Ø600V AC
L17-30
HBL2741
HBLSS45
3ØY 120/208V AC
L21-20
HBL2511
HBLSS45
3ØY 277/480V AC
L22-20
HBL2521
HBLSS45
3ØY 347/600V AC
L23-20
HBL2531
HBLSS45
3ØY 120/208V AC
L21-30
HBL2811
HBLSS45
3ØY 277/480V AC
L22-30
HBL2821
HBLSS45
3ØY 347/600V AC
L23-30
HBL2831
HBLSS45
30A, 3 Pole 4 Wire Grounding
HBLSS45
20A, 4 Pole 5 Wire Grounding
30A, 4 Pole 5 Wire Grounding
B-40
®
Wiring Device-Kellems
Add-A-Shroud
Catalog Number
HBLSS45
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
10 Ampere, 250 Volts, 15 Ampere 125 Volts
3 Pole, 3 Wire and 2 Pole, 3 Wire
3P 3W
For Replacement Use Only
IP20
CU
SUITABILITY
Plugs
2P 3W
CU
Not Grounded
Not UL listed
2.75"(69.9)
Grounded
Not UL listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7567C
–
Yellow and white nylon.
Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7567CY
–
2.26"
(57.4)
HBL7567C
Note: See page B-49 for accessories.
1.75"
(44.4)
1.13"
(28.7)
Flanged Inlets
Description
Catalog Number
Stainless steel casing.
HBL7556
2.31"
(58.7)
1.94"
(49.3)
HBL7556G
1.50"
(38.1)
.16"(4.1) DIA.
HBL7556
3P 3W
For Replacement Use Only
2P 3W
2.78" (70.6)
IP20
SUITABILITY
CU
CU
1.53"
(38.9)
GR
Connector Bodies
Not Grounded
Not UL listed
Grounded
Not UL listed
Description
Cord Dia.
Catalog Number
Insulgrip connector, black and
white nylon. Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7565C
–
Insulgrip connector, yellow and
white nylon. Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7565CY
–
Black phenolic.
.296"-.625"
(7.5-15.9)
HBL7555
1.41"
(35.8)
HBL7565C
1.70"
(43.2)
HBL7555G
Note: See page B-49 for accessories.
Receptacles
2.74"
(69.5)
3.28"
(83.3)
Description
Catalog Number
Duplex, black RTP*, back and side wired.
HBL7580
HBL7580G
Single, black phenolic, back and side wired.
HBL7582
HBL7582G
Note: See page B-48 for accessories.
HBL7580
Flanged Receptacles
Description
Catalog Number
Stainless steel casing.
HBL7557
1.75"
(44.4)
1.34"
(34.0)
HBL7557G
Note: See page B-49 for accessories.
*RTP is an abbreviation for reinforced thermoplastic.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
2.31"
(58.7)
1.94"
(49.3)
1.50"
(38.1)
.16"(4.1) DIA.
HBL7557
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Dimensions in Inches (mm)
B-41
Non-NEMA Twist-Lock® Devices
20 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
Insulgrip® Plugs, Flanged Inlets, Connector Bodies and Receptacles
3P 3W
2P 3W
Y
For Replacement Use Only
2.75"(69.9)
2.26"
(57.4)
1.97"
(50.0)
HBL9965C
IP20
GR
W
CU
SUITABILITY
X
20A 250V
Non-NEMA
Not UL Listed
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL9965GCB
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
–
20A 125/250V
Non-NEMA
Not UL Listed
HBL9965C
HBL99CM65C
Note: See page B-51 for accessories.
1.25" R.
(31.8)
.19" (4.8) DIA.
2.09"
(53.1)
120°
2.04"
(51.8)
2.88"
(73.2)
Flanged Inlets
Description
Catalog Number
–
Nylon casing, back wired.
HBL3325C
Note: See page B-50 for accessories.
120°
HBL3325C
3P 4W
For Replacement Use Only
IP20
W
X
SUITABILITY
Z
Z
X
Y
2.75"(69.9)
Y
2.33"
(59.2)
2.21"
(56.1)
4P 4W
GR
20A 3Ø 250V AC
Non-NEMA
Not UL Listed
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL7411GCB
HBL7411C
20A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
HBL7411C
Note: See page B-53 for accessories.
1.34" R.
(34.0)
.19" (4.8) DIA.
2.27"
(57.7)
Flanged Inlets
Description
Catalog Number
–
Nylon casing, back wired.
120°
2.23"
(56.6)
3.06"
(77.7)
HBL7408C
Note: See page B-52 for accessories.
See page B-69 for technical information.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
120°
HBL7408C
Dimensions in Inches (mm)
B-42
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
20 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
Insulgrip® Plugs, Flanged Inlets, Connector Bodies and Receptacles
2P 3W
3P 3W
Y
For Replacement Use Only
IP20
3.86"(98.0)
W
GR
CU
SUITABILITY
X
20A 250V
Non-NEMA
Not UL Listed
Connector Bodies
20A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL7314GCB
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
–
2.26"
(57.4)
1.97"
(50.0)
HBL7314C
HBL7314C
HBL73CM14C
1.39"
(35.2)
1.11" (28.2)
Note: See page B-51 for accessories.
Single Flush Receptacles
2.20"
(57.2)
Description
Catalog Number
Black nylon face, back wired.
HBL7310BG
1.38"
(34.9)
2.38"
(60.5)
3.61"
(91.6)
HBL7310B
Note: See page B-50 for accessories.
#6-32
TAP
1.28" (32.5)
HBL7310B
Flanged Receptacles
Description
Catalog Number
–
Nylon casing, back wired.
1.25" R.
(31.8)
HBL3326C
.19" (4.8) DIA.
2.09"
(53.1)
Note: See page B-50 for accessories.
120°
2.04"
(51.8)
2.88"
(73.2)
3P 4W
For Replacement Use Only
IP20
SUITABILITY
4P 4W
GR
Z
W
X
Z
120°
X
HBL3326C
Y
Y
20A 3Ø 250V AC
Non-NEMA
Not UL Listed
Connector Bodies
20A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL7413GCB
HBL7413C
3.86"(98.0)
2.33"
(59.2)
2.21"
(56.1)
Note: See page B-53 for accessories.
HBL7413GCB
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL7410BG
1.05" (26.7)
HBL7410B
–
Mounted on a 4" (101.6) round metal cover.
1.71"
(43.4)
HBL7417B
Note: See page B-52 for accessories.
2.38"
(60.5)
2.50"
(63.5)
3.61"
(91.6)
1.57"
(39.8)
Flanged Receptacles
Description
#6-32
TAP
Catalog Number
Nylon casing, back wired.
–
HBL7409C
1.28" (32.5)
HBL7410BG
Note: See page B-52 for accessories.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
1.34" R.
(34.0)
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
120°
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
HBL7409C
Dimensions in Inches (mm)
B-43
Non-NEMA Twist-Lock® Devices
30 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
3P 3W
2P 3W
For Replacement Use Only
2.75"(69.9)
2.26"
(57.4)
1.97"
(50.0)
Insulgrip®
IP20
W
SUITABILITY
Plugs
CU
X
30A 250V
Non-NEMA
Not UL listed
30A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3331GC
HBL3331GC
Y
GR
HBL3331C
Note: See page B-51 for accessories.
1.25" R.
(31.8)
.19" (4.8) DIA.
2.09"
(53.1)
Insulgrip® Flanged Inlets
Description
Catalog Number
–
Nylon casing, back wired.
120°
2.09"
(53.1)
2.88"
(73.2)
HBL3334C
Note: See page B-50 for accessories.
120°
HBL3334C
3P 4W
For Replacement Use Only
IP20
GR
2.21"
(56.1)
Insulgrip®
Plugs
Z
Y
SUITABILITY
2.75"(69.9)
2.33"
(59.2)
4P 4W
Z
X
X
30A 3Ø 250V AC
Non-NEMA
Not UL Listed
Non-NEMA
30A 3Ø Y
120/208V AC
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3431GCB
HBL3431C
Y
W
HBL3431C
Note: See page B-53 for accessories.
See page B-69 for technical information.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
Dimensions in Inches (mm)
B-44
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
30 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
2P 3W
For Replacement Use Only
Insulgrip®
IP20
W
Y
GR
SUITABILITY
Connector Bodies
3P 3W
3.86"(98.0)
CU
X
30A 250V
Non-NEMA
Not UL listed
30A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3333GC
2.26"
(57.4)
1.97"
(50.0)
HBL3333C
HBL3333GC
Note: See page B-51 for accessories.
1.71"
(43.4)
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL3330G
HBL3330
2.38"
(60.5)
3.61"
1.57"
(91.6)
(39.8)
2.50"
(63.5)
Note: See page B-50 for accessories.
Insulgrip® Flanged Receptacles
Description
#6-32
TAP
–
HBL3335C
Note: See page B-50 for accessories.
For Replacement Use Only
1.36" (34.5)
HBL3330G
Catalog Number
Nylon casing, back wired.
1.25" R.
(31.8)
IP20
Insulgrip® Connector Bodies
3P 4W
4P 4W
Z
Z
GR
Y
Y
SUITABILITY
1.13" (28.7)
120°
30A 3Ø 250V AC
Non-NEMA
Not UL Listed
30A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
Cord Dia.
Catalog Number
.350"-1.150"
(9-29)
HBL3433GCB
2.04"
(51.8)
W
X
Black and white nylon.
2.09"
(53.1)
2.88"
(73.2)
X
Description
.19" (4.8) DIA.
120°
HBL3335C
HBL3433C
3.86"(98.0)
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL3430G
HBL3433C
HBL3430
Note: See page B-52 for accessories.
1.71"
(43.4)
1.13" (28.7)
Insulgrip® Flanged Receptacles
Description
Nylon casing, back wired.
Catalog Number
HBL3435CM2
–
Note: See page B-50 for accessories.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
2.50"
(63.5)
1.57"
(39.8)
#6-32
TAP
2.38"
(60.5)
3.61"
(91.6)
1.36" (34.5)
HBL3430
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Dimensions in Inches (mm)
B-45
Non-NEMA Twist-Lock® Devices
20 Ampere, 250 Volts, 10 Ampere, 600 Volts AC
4 Pole, 5 Wire Grounding
Z
For Replacement Use Only
2.75"(69.9)
2.33"
(59.2)
2.21"
(56.1)
HBL3521C
1.34" R.
(34.0)
IP20
W
GR
SUITABILITY
Y
X
20A 250V
10A 600V AC
Non-NEMA
UL/CSA
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3521C
Note: See page B-53 for accessories.
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
Flanged Inlets
Description
Catalog Number
Insulgrip nylon casing, back wired.
HBL3524C
Note: See page B-52 for accessories.
120°
HBL3524C
Z
W
Y
IP20
SUITABILITY
3.86"(98.0)
2.33"
(59.2)
2.21"
(56.1)
Connector Bodies
X
GR
20A 250V
10A 600V AC
Non-NEMA
UL/CSA
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3523C
Note: See page B-53 for accessories.
HBL3523C
Single Flush Receptacles
1.71"
(43.4)
Description
Catalog Number
Black thermoset, back wired.
HBL3520
Note: See page B-52 for accessories.
2.50"
(63.5)
#6-32
TAP
1.57"
(39.8)
2.38"
(60.5)
3.28"
(83.3)
HBL3520
1.34" R.
(34.0)
Flanged Receptacles
Description
Catalog Number
Insulgrip nylon casing, back wired.
HBL3525C
Note: See page B-52 for accessories.
See page B-69 for technical information.
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
120°
HBL3525C
Dimensions in Inches (mm)
B-46
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
30 Ampere, 250 Volts DC Max. and 600 Volts AC Max. 50 - 400Hz
20 Ampere, 3ØY 120/208 Volts AC 400Hz
Variload® Twist-Lock® Devices
In many large plants and laboratories the number of circuits of different ratings and
frequency is greater than the number of blade configurations available in conventional
wiring devices.
Prior to NEMA configuration standardization the solution was “Variload® Twist-Lock®”
devices with four non-interchangeable center pin and slot configurations that can be
assigned within the same premises to circuits of same voltage, frequency and supply
(AC or DC), in accordance with NEC® 406.4(F) and 406.8 and with CE Code, Part I,
Rule 26-700(3).
30A, 250V DC Max. and 600V AC Max. 50 - 400Hz
Center Pin
Configuration
Plugs
Flanged Inlets
.91"
(23.1)
2.13"
(54.1)
DIA.
HBL45315
2.89"
(73.4)
.91"
(23.1)
2.13"
(54.1)
DIA.
1.84"
(46.7)
DIA.
Connector Bodies
Receptacles
HBL45115
–
HBL45135
HBL45105
HBL45215
–
HBL45235
HBL45205
HBL45315
–
HBL45335
HBL45305
HBL45335
1.72"
(43.7)
2.69"
(68.3)
20A 3ØY, 120/208V AC Only, 400Hz
Center Pin
Configuration
1.86"
(47.2)
Plugs
Flanged Inlets
Connector Bodies
Receptacles
HBL45915†
HBL45985CL†
HBL45935†
HBL45905†
#6-32
TAP
Note: †UL Listed only.
1.72"
(43.7)
2.38"
(60.5)
3.28"
(83.3)
1.02"(25.9)
1.27"
(32.3)
HBL45305
Receptacle Wallplates
Description
Single Receptacle with
Face Dia. 1.74" (44.2)
Catalog Number
Stainless steel 302/304, .035 in. (0.9), horizontal brushed finish.
SS725
IP55*
SS725
SUITABILITY
Weatherproof Boots
Description
Catalog Number
Seal-Tite® black elastomer for Variload® plugs.
HBL6027**
Seal-Tite®
HBL6028**
black elastomer for
Variload®
connector bodies.
Note: *When installed and used properly with plug and connector body combinations.
** Weatherproof boots not UL Listed, nor CSA Certified.
HBL6027
HBL6028
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Dimensions in Inches (mm)
B-47
Twist-Lock® Devices
Accessories
for 15 Ampere 2 and 3 Wire Duplex, Single Receptacles and Flanged Devices
Wallplates, 1-Gang
SS8
SS7
Description
Color
Duplex
Receptacles
Catalog Number
Single Receptacles with
Face Dia. 1.40" (35.6)
Catalog Number
Nylon, smooth.
Brown
Ivory
NP8
NP8I
NP7
NP7I
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish.
SS8
SS7
Stainless steel 430, .035 in. (0.9),
horizontal brushed finish.
SS8L
SS7L
Brass .04 in. (1.0),
horizontal brushed finish.
SB8
SB7
Aluminum .05 in. (1.3),
horizontal brushed finish.
SA8
SA7
Description
Catalog Number
Catalog Number
Cast aluminum, for standard horizontal box mount.
HBL5205WO
–
Same as above except FS/FD box mount.
HBL5206WO
–
IP44
SUITABILITY
HBL5206WO
Weatherproof Covers
–
Cast aluminum vertical FS/FD box mount.
HBL5221
HBL7420
Gray thermoplastic, vertical standard box mount,
corrosion resistant.
HBL5222*
–
Same as above except yellow.
HBL52CM22*
–
Gray thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL5221*
HBL7423WO
Yellow thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL52CM21*
HBL74CM23WO
White thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL52CM21W*
–
Note: *IP20 Suitability only.
IP44
SUITABILITY
Weatherproof Covers for
15A Nylon Flanged Receptacles and Inlets
HBL7423WO
Description
Catalog Number
Gray thermoplastic, corrosion resistant.
WP1
Note: All weatherproof covers listed above are UL Listed for wet and damp locations with cover closed.
Those with suffix WO are UL Listed with cover open.
See page N-23 for additional information on covers.
WP1
B-48
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories
for 15 Ampere 2 and 3 Wire Plugs, Connector Bodies and Flanged Devices
Tinted lid is aesthetically pleasing in any location.
High-impact, polycarbonate while-in-use cover will
not rust or corrode; cover is NEMA 3R rated
Compact 2-gang design
Pool Kit Contains:
s Heavy duty, industrial grade locking
receptacle NEMA L5-20, 20A 125V
s Single-pole switch
(20A, 120-277V AC)
s Two gang, 2 inch deep die-cast aluminum
weatherproof box with (4) ¾ inch
threaded outlets
s Two gang, weatherproof while-in-use cover
s Includes mounting hardware, gasket,
wire connector and (3) closure plugs
s Complete assembly instructions
HBLPKL520
Locking receptacle prevents
unintentional disconnection
of mating pump plug
HBL6023
Pool Pump Kit
Description
Catalog Number
Pool pump receptacle kit.
HBLPKL520
IP55*
Seal-Tite®,
Weatherproof,
Triple Seal Boots
for 15A Insulgrip® Devices
SUITABILITY
HBL6024
Description
Catalog Number
Black elastomer boot for plugs when used in a cord set and connector bodies
when used with a flange inlet.
HBL6023
Same as above except yellow elastomer.
HBL60CM23
Black elastomer boot for connector bodies when used in cord sets.
HBL6024
Same as above except yellow elastomer.
HBL60CM24
Note: *When installed and used properly with plug and connector body combinations.
HBL7529A
Closure Cover
Description
Catalog Number
For use with 3 wire 15A Twist-Lock flush or flanged receptacles.
HBL7529A
3.14"
(79.8)
4.22"
(107.2)
PLUGOUT® Lockout Devices
Description
Catalog Number
Lockout device for 15A and 20A straight blade plugs.
HLDMP
Lockout device for attachable 20 and 30A plugs, straight body or angle types,
with or without weatherproof covers.
HLD
HLDMP
Note: See section Z for additional information on PLUGOUT Lockout devices.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-49
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere 3 Wire Receptacles and Flanged Devices
Wallplates, 1-Gang
Description
Color
Single Receptacles with
Face Dia. 1.60" (40.6)
Catalog Number
Nylon, smooth.
Black
NP720BK
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish.
SS720
Brass .04 in. (1.0), horizontal brushed finish.
SB720
SS720
IP44
SUITABILITY
Weatherproof Covers
Description
Catalog Number
Cast aluminum, for FS/FD box mounting.
HBL7420
Gray thermoplastic, for FS/FD box mounting,
corrosion resistant.
HBL7425WOA
Same as above except yellow.
HBL74CM25WOA
HBL7425WOA
Weatherproof Covers for
Flanged Inlets and Flanged Receptacles
IP44
SUITABILITY
Description
Catalog Number
Gray thermoplastic, corrosion resistant.
WP2
Note: Weatherproof covers are UL Listed for wet and damp location with cover closed.
Those with suffix WOA are UL Listed with cover open.
See page N-23 for additional information on covers.
WP2
Closure Cover for 3 Wire Flanged Inlets
Description
Catalog Number
Rubber closure plug.
HBL2899
Note: Closure cover not UL Listed, CSA Certified.
HBL2899
B-50
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere, 3 Wire Plugs and Connector Bodies
IP55*
Insulgrip®
SUITABILITY
Weatherproof, Seal-Tite®, Triple Seal Boots
Description
Catalog Number
Black elastomer boot for plugs when used in a cord set and
connector bodies when used in flanged inlets.
HBL6031
Same as above except yellow.
HBL60CM31
Black elastomer boot for connector bodies when used in a cord set.
HBL6032
Same as above except yellow.
HBL60CM32
HBL6031
Angle Adapter
Description
Catalog Number
Nylon, angle adapter for Insulgrip plugs and connector bodies,
cord grip range .325"-.930" (8.3-24).
HBL3WAA
HBL6032
PLUGOUT® Lockout Devices
Description
Catalog Number
Lockout device for attachable 20 and 30A locking plugs, straight body
or angle types, with or without weatherproof covers.
HLD
Lockout device for 20 and 30A 3 wire angle plugs and watertight
Safety-Shroud® Twist-Lock® plugs.
HLD2
Note: See section Z for additional information on PLUGOUT Lockout devices.
*When installed and used properly with plug and connector body combinations.
HBL3WAA
Insulgrip® Plug and Connector Body Latching Kit
The Hubbell latching kit provides both improved safety and security through a double
locking feature that makes unintentional disconnection virtually impossible – even under
high vibration situations. The plug and connector body lock once when first connected,
then again when you push the special position locking slide into place.
Insulgrip® Latching Kit
Description
Catalog Number
For all 3 wire 20A and 30A Twist-Lock Insulgrip plugs and connectors.
SK2
Valise®
SK2
IP55*
SUITABILITY
Weatherproof, Seal-Tite®, Triple Seal Boots
Description
Catalog Number
Yellow Seal-Tite® elastomer triple seal cover for use with Valise plugs when used
in cord set and Valise connector bodies when used with flanged inlet.
HBL60CM31V
Yellow Seal-Tite® elastomer triple seal cover for use with Valise connector bodies.
HBL60CM32V
HBL60CM31V
Note: *When installed and used properly with plug and connector body combinations.
HBL60CM32V
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-51
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere, 4 and 5 Wire Receptacles and Flanged Devices
Wallplates, 1-Gang
Description
Color
Single Receptacles with
Face Dia. 1.60" (40.6)
Catalog Number
Nylon, smooth.
Black
NP720BK
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish, 1-gang.
SS720
Brass .04 in. (1.0), horizontal brushed finish.
SB720
NP720BK
IP44
SUITABILITY
Weatherproof Covers
Description
Catalog Number
Cast aluminum, for FS/FD box mounting.
HBL7420
Gray thermoplastic, for FS/FD box mounting, corrosion resistant.
HBL7425WOA
Same as above except yellow.
HBL74CM25WOA
SS720
Weatherproof Covers for
Flanged Inlets and Flanged Receptacles
IP44
SUITABILITY
Description
Catalog Number
Gray thermoplastic, corrosion resistant.
WP2
Note: Weatherproof covers are UL Listed for wet and damp location with cover closed.
Those with suffix WOA are UL Listed with cover open.
See page N-23 for additional information on covers.
HBL7425WOA
WP2
B-52
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere, 4 and 5 Wire Plugs and Connector Bodies
IP55*
Insulgrip®
SUITABILITY
Weatherproof, Seal-Tite®, Triple Seal Boots
Description
Catalog Number
Seal-Tite®
triple seal cover for plug when used on a cord set or when used
with flush receptacles or connector bodies when used with flanged inlets.
Black elastomer.
HBL6035
Same as above except yellow.
HBL60CM35
Seal-Tite triple seal cover for connector bodies, when used on interconnecting
cord sets. Black elastomer.
HBL6036
Same as above except yellow.
HBL60CM36
HBL6035
Angle Adapter
Description
Catalog Number
Nylon, angle adapter for Insulgrip plugs and connectors, cord grip range
.350"-1.15" (8.9-29.2).
HBL45WAA
HBL6036
PLUGOUT® Lockout Device
Description
Catalog Number
Lockout device for attachable 20 and 30A plugs, straight body or
angle types, with or without weatherproof covers.
HLD
Lockout device for 20 and 30A, 4 and 5 wire angle plugs and watertight
Safety-Shroud® Twist-Lock® plugs.
HLD2
Note: See section Z for additional information on PLUGOUT Lockout devices.
*When installed and used properly, with plug and connector body combinations.
HBL45WAA
4.27"
(108.5)
Insulgrip® Plug and Connector Body Latching Kit
7.27"
(184.7)
When you want to make doubly sure that plugs and connector bodies stay connected, the Hubbell
latching kit provides both improved safety and security through a double locking feature that
makes unintentional disconnection virtually impossible – even under high vibration situations.
The plug and connector body lock once when first connected, then again when you push the
special position locking slide into place.
HLD
Insulgrip® Latching Kit
Description
Catalog Number
For all 20 and 30A, 4 and 5 wire Twist-Lock Insulgrip plugs and connectors.
SK3
6.31"
(160.3)
12.5"
(317.5)
SK3
HLD2
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-53
Twist-Lock® Devices
Safety-Shroud® Twist-Lock® Accessories
E
F
C
A
15° Angle Non-Metallic Back Box
NPT
Hub
Size
15°
B
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
D
Non-Metallic Angle Box
E
A
F
NPT
Hub
Size
D
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
Metallic Angle Box
E
48 CU. IN.
C
F
5.67" 4.44" 4.05" 3.91"
(144.0) (112.8) (102.9) (99.3)
E
Inch
(mm)
F
Inch
(mm)
2.35" 4.92"
(59.7) (125.0)
Cubic Inch
Capacity Catalog Number
30.00"
BB2030N
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
F
Inch
(mm)
E
Inch
(mm)
Cubic Inch
Capacity Catalog Number
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00"
BB201W
1"
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00"
BB301W
Metallic Feed Thru Back Boxes
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
D
Metallic Feed Thru Box
D
E
C
D
Inch
(mm)
¾"
NPT
Hub
Size
B
C
Inch
(mm)
15° Angle Metallic Back Boxes
15°
A
B
Inch
(mm)
Note: Hub is not included; order Raco part number 1704. This box meets IP67 requirement and Type 4X requirements when
installed with a watertight conduit hub.
C
B
1"
A
Inch
(mm)
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic Inch
Capacity Catalog Number
¾"
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00"
FT202W
1"
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00"
FT302W
Note: These boxes are cast aluminum and are finished with enamel paint. These boxes withstand a 500-hour salt spray test as
well as UL raintight and external icing tests. NPT (metric designator).
A
B
55°
55° Angle Metallic Adapter and Back Box
NPT
Hub
Size
AB203055
D
E
B
C
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
1"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
6.80" 5.63" 6.60" 4.50" 3.74"
(172.4) (142.9) (167.0) (114.3) (95.0)
-
Cubic Inch
Capacity Catalog Number
45.27"
AB203055
A
55° Angle Metallic Adapter with Grounding Lug
55°
A
Inch
(mm)
AA203055
Description
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
HBL2030AP
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
4.89" 3.33" 4.29" 3.75" 2.50"
(172.4) (167.0) (142.9) (114.3) (95.0)
-
Cubic Inch
Capacity Catalog Number
25.00"
AA203055
Straight Watertight Wall Box Adapter
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles and
inlets to 2-gang, device mount, FD boxes.
HBL2030AP
Non-Watertight Angle Wall Box Adapter
AA2030PS
Dimensions in Inches (mm)
B-54
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles to
1- or 2-gang standard wall boxes (4" or 4¹¹⁄₁₆" square).
AA2030PS
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Ampere Plugs and Connector Bodies
Features and Benefits
The Difference Is Insulgrip®...and a Whole Lot More
Super tough nylon housing
offers better impact qualities
Stainless steel shroud restricts
mismating with the wrong device
Thermoplastic polyester interior
provides heat resistance and
impact strength
Housing assembly latch slotted to
fit standard flat-blade screwdriver
providing secure assembly and
fast disassembly for wiring
Padlock capable shroud allows
compliance to OSHA lockout tagout
regulation 29 CFR 1910 .147
CS6361C
6/6 nylon nose – thermoplastic
polyester terminal cover provides
heat resistance in terminal area and
impact strength of nose piece
CS6360C
Three-piece thermoplastic clamp
assembly with stainless steel
fast lead screws provides a
more consistent, durable grip.
Sealed cable entry keeps out
moisture and dust
Box terminal with hex socket threaded
slug is superior because it permits high
clamping pressure on conductors
without damaging strands
Hubbell’s 50 amp Twist-Lock® devices features heavy-duty
design built for heavy-duty applications. These Hubbell
50 amp Twist-Lock plugs and connector bodies are built
to go where you need power, even in some of the
harshest environments.
On the outside, 50 amp plugs and connectors are made
of Super tough nylon for better impact resistance. On the
plug, the stainless steel shroud not only provides protection
and durability, but safety as well. That’s because the rigid
construction restricts distortion, thus minimizing the
possibility of mating incorrect devices.
www.hubbell-wiring.com
One-piece grounding contact on
4-wire devices provides a more
reliable grounding system for a
safer device
On the inside are the kinds of features that separate Hubbell
from all the rest. The cord grip has been designed with
offset gripping jaws to securely hold the conductors – not
just the cord jacket. Hubbell’s box terminals speed wiring
and provide a superior termination. The plug’s thermoplastic
polyester interior provides excellent heat resistance without
compromising strength.
In all, it’s the combination of function and performance that
Hubbell demands of all its products. And it’s why we’ll never
add a feature that compromises performance.
®
Wiring Device-Kellems
B-55
Twist-Lock® Devices
50 Ampere, 125, 250 Volts and 480 Volts AC
2 Pole, 3 Wire Grounding
Y
6.38"
(162.0)
IP20
CS8265C
X
G
50A 125V
UL/CSA
Plugs
X
G
SUITABILITY
2.59"
(65.8)
Y
W
Description
Cord Dia.
Catalog Number
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6361C
G
50A 250V
UL/CSA
50A 480V AC
UL/CSA
CS8265C
CS8465C
CS8275
CS8475†
Note: See page B-60 for accessories.
3.50"
(88.9)
90°
Flanged Inlets
.19"
(4.8)
DIA.
1.50"R
(38.0)
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
CS6377†
2.62"
(66.5)
2.17"
(55.1)
CS8275
IP20
Y
W
SUITABILITY
6.34"
(161.0)
Connector Bodies
2.59"
(65.8)
X
G
50A 125V
UL/CSA
Description
Cord Dia.
Catalog Number
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6360C
Y
X
G
50A 250V
UL/CSA
G
50A 480V AC
UL/CSA
CS8264C
CS8464C
CS8269
CS8469†
Note: See page B-60 for accessories.
CS8264C
2.13"
(54.1)
Receptacles
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
Description
Catalog Number
Black phenolic.
CS6370
Note: See page B-60 for accessories.
See page B-71 for technical Information.
†Not CSA Certified.
2.44"
(62)
CS8269
Dimensions in Inches (mm)
B-56
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Ampere, 125/250, 3Ø 250 Volts and 3Ø 480 Volts AC
3 Pole, 4 Wire Grounding
Y
IP20
SUITABILITY
W
Z
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6365C
Z
G
G
50A
125/250V AC
UL/CSA
Plugs
X
X
G
6.38"
(162.0)
Y
Y
X
50A
3Ø 250V AC
UL/CSA
CS8365C
50A
3Ø 480V AC
UL/CSA
2.59"
(65.8)
CS8165C
CS6365C
Note: See page B-60 for accessories.
3.50"
(88.9)
90°
Flanged Inlets
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
CS6375
Zinc plated steel casing,
thermoset interior with lift cover.
Gray Valox® housing and flange.
1.50"R
(38.0)
CS8375
CS8175
CS6375M2
–
–
HBL6375S*
–
–
.19"
(4.8)
DIA.
2.62"
(66.5)
2.17"
(55.1)
CS6375
Note: *Type 3R.
2.63"
(66.8)
1.50"R
(38.0)
Y
IP20
SUITABILITY
Connector Bodies
Y
Y
X
X
X
W
Z
G
G
50A
125/250V AC
UL/CSA
50A
3Ø 250V AC
UL/CSA
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6364C
CS8364C
Z
2.19"
(55.6)
G
50A
3Ø 480V AC
UL/CSA
.19"
(4.8)
DIA.
90°
3.50"
(88.9)
CS8164C
CS6375M2
Note: See page B-60 for accessories.
6.34"
(161.0)
Receptacles
Description
Catalog Number
Black phenolic.
CS6369
CS8369
CS8169
2.59"
(65.8)
Note: See page B-60 for accessories.
CS6364C
2.13"
(54.1)
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
2.44"
(62.0)
CS6369
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-57
Twist-Lock® Devices
50 Ampere, 250 Volts DC and 600 Volts AC
2 Pole, 3 Wire Grounding
6.38"
(162.0)
IP20
SUITABILITY
2.59"
(65.8)
HBL3763C
Plugs
Y
X
G
50A 250V DC
50A 600V AC
Description
Cord Dia.
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3763C
Note: See page B-60 for accessories.
3.50"
(88.9)
90°
Flanged Inlets
Description
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
2.17"
(55.1)
Zinc plated steel casing,
thermoset interior.
HBL3777
Zinc plated steel casing,
thermoset interior with lift cover.
HBL3767
HBL3777
2.63"
(66.8)
1.50"R
(38.0)
IP20
2.19"
(55.6)
. 19"
(4.8)
DIA.
90°
3.50"
(88.9)
Connector Bodies
SUITABILITY
50A 250V DC
50A 600V AC
Description
Cord Dia.
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3762C
Note: See page B-60 for accessories.
HBL3767
6.34"
(161.0)
.63"
(16.0)
Receptacles
Description
2.59"
(65.8)
Black phenolic.
HBL3771
Note: See page B-60 for accessories.
See page B-71 for technical Information.
HBL3762C
2.13"
(54.1)
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
2.44"
(62)
HBL3771
Dimensions in Inches (mm)
B-58
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Ampere, 250 Volts DC and 600 Volts AC
3 Pole, 4 Wire Grounding
Important Note: Catalog numbers HBL7765C, HBL7958, HBL7968, HBL7764C, HBL7379 are
for replacement use only. See other singly rated 50A Twist-Lock® devices in this section.
HBL3700 series Twist-Lock devices do not interchange with any other devices in this section.
Z
X
Z
G
Plugs
6.38"
(162.0)
X
Y
Y
G
50A 600V AC
50A 250V DC
50A 600V AC
50A 250V DC
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3765C
2.59"
(65.8)
HBL7765C
HBL3765C
Note: See page B-60 for accessories.
2.63"
(66.8)
1.50"R
(38.0)
Flanged Inlets
2.19"
(55.6)
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
HBL3775
HBL7958
Zinc plated steel casing,
thermoset interior with lift cover.
HBL3768
HBL7968
.19"
(4.8)
DIA.
90°
3.50"
(88.9)
HBL3768
X
Y
Z
X
Z
Connector Bodies
3.50"
(88.9)
90°
Y
G
G
50A 600V AC
50A 250V DC
50A 600V AC
50A 250V DC
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3764C
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
HBL7764C
Note: See page B-60 for accessories.
2.17"
(55.1)
HBL3775
6.34"
(161.0)
Receptacles
Description
Catalog Number
Black phenolic.
HBL3769
HBL7379
2.59"
(65.8)
Note: See page B-60 for accessories.
HBL3764C
2.13"
(54.1)
2.69"
(68.3)
1.03"
(26.2)
3.28"
(83.3)
2.44"
(62.0)
HBL3769
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-59
Twist-Lock® Devices
50 Ampere Twist-Lock® Accessories
IP44
SUITABILITY
Weatherproof Receptacle Lift Cover Plates for FS/FD Box Mounting
HBL7774WO
Description
Catalog Number
Corrosion resistant, gray thermoplastic.
HBL7774WO
Same as above except yellow.
HBL77CM74WO
Cast aluminum.
HBL7770
Note: See section N for additional information on weatherproof plates.
Receptacle Plates for FS/FD Box Mounting
HBL7770
Description
Catalog Number
Cast aluminum with lift cover.
Same as above less lift cover.
HBL7382p*
HBL7383p
Stainless steel, single gang, wallplate.
SS750c
Receptacle ½" Raised Cover
Description
Catalog Number
Galvanized Steel fits 4" square or 2-gang box.
HBL50SCc
IP55**
SUITABILITY
Weatherproof Boots
HBL7382
Description
Catalog Number
Seal-Tite®
triple seal black elastomeric cover for plugs when used in a cord set
and connector bodies when used with flanged inlets.
HBL7716C†
Seal-Tite triple seal black elastomeric cover for connector bodies when used
with cord sets.
HBL7717C†
Inlet Closure Plug
HBL50SC
Description
Catalog Number
Black closure plug.
HBL4892†
Replacement Parts
Description
Catalog Number
Cord clamp Kit.
HBLCSCK
8Y^O$
yASVV
YXVc
PS^
XYXw-=x
^cZO
+
>aS]^6YMU
\OMOZ^KMVO]
8Y^
?6
6S]^ON
wA.6
-VY]ONx
AROX
SX]^KVVON
KXN
_]ON
Z\YZO\Vc
aS^R
ZV_Q
KXN
MYXXOM^Y\
LYNc
MYWLSXK^SYX]
cIP20 SUITABILITY.
†8Y^
?6
6S]^ON
SS750
HBL7716C
B-60
HBL7717C
HBL4892
®
Wiring Device-Kellems
HBLCSCK
www.hubbell-wiring.com
Hubbellock® Devices
Plugs and Connector Bodies
Features and Benefits
Three-piece thermoplastic clamp assembly
with fast-lead stainless screws provides a
more consistent durable grip. Grommets
provide a sealed cable entry that protects
against the entry of moisture and dust
HBL21414B
Impact resistance in the interior of the
female device comes from a strong
thermoplastic material
Superior wire terminations are assured
with box terminals and screws with
pressure pads. This design captures stray
wire strands and permits more clamping
pressure on the wire without damaging it.
Loosening of terminations and resulting
heat build-up are greatly reduced
No “lazy” connections because a springloaded safety shutter automatically ejects
the plug if it hasn’t been properly locked
into the female device. This eliminates
teasing of the contacts, a major cause
of contact burn-up
Arcs are snuffed out, when devices
are mated or unmated under load, by
spring-loaded safety shutter
Longer contact life is assured by
supplementary springs. Other
devices rely just on contacts
themselves to provide proper
contact pressure
Enhanced safety because access to
live female contacts is restricted by the
spring-loaded safety shutter
Positive locking is ensured by the nose
of the plug being keyed into
a detent in female device. This lock is
independent of the contacts or
a separate mechanical lock
Insulated non-metallic housing
enhances safety and abuse
resistance
HBL21415B
Note: Above cut-away view and call-outs are construction elements pertaining specifically to the 30A Hubbellock series.
While the Hubbellock contact interface design applies to all, there are construction elements that are different, depending on the amperage.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-61
Hubbellock® Devices
20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
3.22"
(81.8)
IP30
GR
SUITABILITY
1.72"
(43.7)
2.31"
(58.7)
Plug
W
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23035B
HBL23035B
GR
3.56"
(90.4)
Connector Body
1.72"
(43.7)
1.63"
(41.4)
W
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23032B
HBL23032B
GR
#6-32
TAP
Receptacle
1.38" 2.38" 3.28"
(35.1) (60.5) (83.3)
2.50"
(63.5)
W
20A 125V
Description
Catalog Number
Black phenolic, back wired.
HBL23030
8Y^O$
.O`SMO]
VS]^ON
KLY`O
K\O
XY^
SX^O\MRKXQOKLVO
aS^R
KXc
Y^RO\
2_LLOVVYMU
NO`SMO
VS]^ON
SX
^RS]
MK^KVYQ
1.66"
(42.2)
HBL23030
Accessories
Weatherproof Covers
HBL7423WO
Description
Catalog Number
Gray polycarbonate for FS/FD box mounting, corrosion resistant.
IP44 SUITABILITY.
HBL7423WO
Same as above except yellow.
HBL74CM23WO
Cast aluminum, lift cover for indoor use only.
HBL23007
Stainless steel 302/304, single receptacle wallplate.
SS7
Stainless steel 430, single receptacle wallplate.
SS7L
HBL23007
Dimensions in Inches (mm)
B-62
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbellock® Devices
20 Ampere, 125 Volts AC or DC, 10 Ampere, 250 Volts DC, 480 Volts AC
2 Pole, 3 Wire Grounding
IP30
GR
SUITABILITY
2.31"
(58.7)
Y
X
Plug
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23005GB
1.72"
(43.7)
3.22"
(81.8)
HBL23005GB
Y
3.56"
(90.4)
GR
X
Connector Body
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23002GB
1.72"
(43.7)
1.63"
(41.4)
HBL23002GB
Y
1.66"
(42.2)
GR
X
Receptacle
20A 125V
Description
Catalog Number
Black phenolic, back wired.
HBL23000G
2.50"
(63.5)
1.38" 2.38" 3.28"
(35.1) (60.5) (83.3)
#6-32
TAP
HBL23000G
Accessories
Weatherproof Covers
Description
Catalog Number
Gray polycarbonate for FS/FD box mounting, corrosion resistant.
IP44 SUITABILITY.
HBL7423WO
Same as above except yellow.
HBL74CM23WO
Cast aluminum, lift cover for indoor use only.
HBL23007
Stainless steel 302/304, single receptacle wallplate.
SS7
Stainless steel 430, single receptacle wallplate.
SS7L
HBL7423WO
HBL23007
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-63
Hubbellock® Devices
30 Ampere, 600 and 480 Volts AC, 20 Ampere, 250 Volts DC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
.88"
(22.4)
IP30
4.75"
(120.7)
HBL21415B
4.75"
(120.7)
2.33"
(59.2)
4.75"
(120.7)
GR
Z
Y
GR
Y
4P 5W
GR
W
Y
X
Plugs
30A 600V AC
20A 250V DC
X
X
30A 480V AC
30A 600V AC
20A 250V DC
Description
Cord Dia.
Catalog Number
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
HBL21415B
–
–
Same as above except
corrosion resistant.
.700"-1.200"
(17.78-30.5)
HBL21CM415B
–
–
Red nylon housing,
thermoset interior.
.700"-1.200"
(17.78-30.5)
–
HBL20445B†
–
Black nylon housing,
thermoset interior,
steel shroud.
.700"-1.200"
(17.78-30.5)
–
–
HBL25415B
Flanged Inlets
2.50"
(63.5)
2.33"
(59.2)
HBL25415B
Z
Note: See page B-68 for accessories.
†Not CSA Certified.
HBL20445B
.88"
(22.4)
3P 4W
Z
SUITABILITY
2.33"
(59.2)
.88"
(22.4)
3P 4W
Description
Catalog Number
Weathertight, corrosion resistant, nickel plated
brass plate, for FS/FD box mounting.
HBL22CM428
–
–
Black phenolic interior, aluminum housing,
for FS/FD box mounting (not shown).
HBL20418
–
–
Aluminum angle housing, with ¾" NPT hub
for surface mounting.
HBL21447
–
–
4.56"
(115.8)
3.25"
(82.6)
5.31"
(134.9)
2.69"
(68.3)
HBL21447
SEHBL3 - Switched enclosure for use with 3 pole 4 wire
30A Hubbellock receptacle. Receptacle not included.
See page B-37 for additional information.
Dimensions in Inches (mm)
B-64
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbellock® Devices
30 Ampere, 600 and 480 Volts AC, 20 Ampere, 250 Volts DC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
IP30
3P 4W
3P 4W
4P 5W
Z
Z
Z
W
GR
GR
Y
Y
Y
GR
.88"
(22.4)
5.08"
(129.0)
SUITABILITY
X
Connector Bodies
30A 600V AC
20A 250V DC
X
X
30A 480V AC
30A 600V AC
20A 250V DC
Description
Cord Dia.
Catalog Number
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
HBL21414B
–
–
Same as above except
corrosion resistant.
.700"-1.200"
(17.78-30.5)
HBL21CM414B
–
–
Red nylon housing,
thermoset interior.
.700"-1.200"
(17.78-30.5)
–
HBL20444B
–
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
–
–
HBL25414B
2.44"
(62.0)
HBL21414B
.88"
(22.4)
5.08"
(129.0)
2.44"
(62.0)
Note: See page B-68 for accessories.
Receptacles
HBL20444B
Description
Catalog Number
Black phenolic.
HBL20403
Weathertight, corrosion resistant, nickel plated
brass plate, for FS/FD box mounting.
IP44 SUITABILITY.
HBL22CM427
Aluminum angle housing, with ¾" NPT hub
for surface mounting. IP44 SUITABILITY.
HBL21420
.88"
(22.4)
–
5.91"
(150.1)
–
2.5"
(63.5)
2.69"
(68.3)
HBL25414B
Black phenolic, red center insert.
–
HBL20443
–
Black phenolic interior, aluminum housing,
blue finish, for FS/FD box mounting.
–
–
HBL25403
Black phenolic interior, aluminum weatherproof
housing, blue finish for FS/FD box mounting.
IP44 SUITABILITY.
–
–
HBL25250
1.75"
(44.5)
1.22"
(31.0)
3.28" 2.69"
(83.3) (68.3)
Note: See page B-68 for accessories.
1.94"
(49.3)
Receptacle Accessories
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY*
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR*
Cast aluminum, wet locations only when cover “closed” and damp locations, lift cover plate.
HBL20405
Cast aluminum, wet locations only when cover “closed” and damp locations, red finish.
HBL20446
302/304 stainless, single gang, smooth. NOT weatherproof.
SS737
1.94"
(49.3)
HBL20403
4.56"
(115.8)
3.25"
(82.6)
5.31"
(134.9)
Note: *Features two #6-32 threaded inserts to back mount device to cover.
4- #6-32
SCREWS
3.00"
(76.2)
4- #6-32
SCREWS
2.69"
(68.3)
2.84"
(72.1)
1.88"
(47.8 )
HBL21420
1.94"
(49.3)
1.22"
(31.0)
4.56" 3.25"
(115.8) (82.6)
4.56" 3.25"
(115.8) (82.6)
1.88"
(47.8 )
2.84"
(72.1)
HBL25250
3.28" 2.69"
(83.3) (68.3)
1.66"
(42.2)
2.48"
(49.3)
HBL25403
1.94"
(49.3)
HBL20443
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-65
Hubbellock® Devices
60 Ampere, 600 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
3P 4W
4P 5W
X
4.81"
(122.2)
IP30
1.09"
(27.7)
X
W
GR
Y
GR
Y
SUITABILITY
Z
Plugs
3.03"
(77.0)
HBL26419
4.81"
(122.2)
60A 600V
Description
Cord Dia.
Catalog Number
Black phenolic interior with yellow
thermoplastic sleeve over steel housing.
.920"-1.450"
(23.36-36.83)
HBL26419
Black phenolic interior with blue
thermoplastic sleeve and steel housing.
1.00"-1.50"
(25.40-38.10)
–
Z
60A 600V AC
–
HBL26519
1.09"
(27.7)
3.03"
(77.0)
IP30
SUITABILITY
Flanged Inlets
HBL26519
2.73"
(69.3)
3.94"
(100.1)
4.13"
(104.9)
3.50"
(88.9)
2.69"
(68.3)
Description
Catalog Number
Black phenolic interior with steel
housing and flange.
HBL26422
Black phenolic interior with steel
housing and flange with blue finish.
–
–
HBL26522
HBL26422
2.73"
(69.3)
3.94"
(100.1)
4.13"
(104.9)
2.69"
(68.3)
3.50"
(88.9)
HBL26522
Dimensions in Inches (mm)
B-66
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbellock® Devices
60 Ampere, 600 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
3P 4W
4P 5W
IP30
X
GR
GR
Y
SUITABILITY
W
Y
Z
Z
Connector Bodies
4.88"
(124.0)
1.09"
(27.7)
X
60A 600V
3.19"
(81.0)
60A 600V AC
Description
Cord Dia.
Catalog Number
Black phenolic interior with yellow
thermoplastic sleeve over steel cover.
.920"-1.450"
(23.36-36.83)
HBL26418
Black phenolic interior with blue
thermoplastic sleeve over steel cover.
1.00"-1.50"
(25.40-38.10)
–
HBL26418
–
HBL26516
5.44"
(138.2)
1.09"
(27.7)
IP44
Receptacles
3.19"
(81.0)
SUITABILITY
Description
Catalog Number
Black phenolic interior with short aluminum
housing and lift cover.
HBL26410
–
Black phenolic interior with long aluminum
housing and lift cover.
HBL26420
–
–
Black phenolic interior with long aluminum
housing with lift cover and blue finish.
HBL26516
1.75"
(44.5)
3.63"
(92.2)
HBL26520
3.50"
(88.9)
sq. 2.88"
(73.2)
IP30
Flanged Receptacles
1.84"
(46.7)
SUITABILITY
.25 DIA.
HBL26410
Description
Catalog Number
Black phenolic interior with steel housing
and flange.
HBL26421
–
–
Black phenolic interior with steel housing
and flange with blue finish.
3.63"
(92.2)
4.88"
(124.0)
HBL26521
3.50"
(88.9)
sq.
2.88"
(73.2)
HBL26420
Receptacle Box and Adapter Plates (Box requires one adapter)
Description
Catalog Number
Box, cast aluminum, only for 60A Hubbellock receptacles.
HBL26401
Straight adapter plate.
HBL26402
45° adapter plate.
HBL26404
Note: Straight or angle adapter plate must be used when mounting a 60A receptacle to HBL26401 box.
Cannot be used with round flanged receptacles and inlets.
See page B-68 for additional information.
4.88"
(123.9)
3.63"
(92.2)
3.50"
(88.9)
sq.
2.88"
(73.2)
HBL26520
3.31"
(84.1)
4.52"
(114.8)
4.53"
(102.13)
4.13"
(104.9)
2.69"
(68.3)
3.50"
(88.9)
2.86" 4.12"
(72.6) (104.6)
2.69"
(68.3)
2.86"
(72.6)
3.31"
(84.1)
HBL26421
HBL26521
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-67
Hubbellock® Devices
Hubbellock® Accessories
30 Amp Hubbellock® Accessories
Receptacle Plates for FS/FD Box Mounting
HBL20405
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY*
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR*
Cast aluminum, wet location only when cover “closed” and damp locations, lift cover plate.
HBL20405
Cast aluminum, wet location only when cover “closed” and damp locations, red finish.
HBL20446
302/304 stainless, single gang, smooth. NOT weatherproof.
SS737
Note: *Features two #6-32 threaded inserts to back mount device to cover.
IP54
Switched Enclosure
SUITABILITY
Description
Catalog Number
Switched enclosure for use with 30A 3 pole 4 wire Hubbellock receptacle.
Receptacle not included.
SEHBL3
Note: For more information on switched enclosures see page B-37.
Liquidtight Metallic Conduit Adapters (Not Shown)
SEHBL3
Description
Catalog Number
Adapter for use with ½" NPT conduit fittings.
SAB12
Adapter for use with ¾" NPT conduit fittings.
SAB34
Boots
Description
Catalog Number
“Mini” boot for Hubbellock connector body.
HBL20424B†
“Mini” boot for Hubbellock plug.
HBL20425B†
Note:
†Not
UL Listed or CSA Certified.
60 Amp Hubbellock® Accessories
SAB34
Receptacle Box and Adapter Plates (Box requires one adapter)
Description
Catalog Number
Box, cast aluminum, only for 60A Hubbellock receptacles.
HBL26401
Straight adapter plate.
HBL26402
45° adapter plate.
HBL26404
Note: Straight or angle adapter plate must be used when mounting a 60A receptacle to HBL26401 box.
Cannot be used with round flanged receptacles and inlets.
HBL20424B
Kellems® Cable Grip
Description
Cord Diameter
Catalog Number
Cable grip.
.830"-1.000" (21.1-25.4)
H660A
Cable grip (not shown).
1.000"-1.140" (25.4-28.9)
H661A
Cable grip (not shown).
1.125"-1.328 (28.6-33.7)
H662A
4.50"
(114.3)
3.88"
(98.6)
HBL20425B
4.50"
(114.3)
3.88"
(98.6)
3.88" 4.50"
(98.6) (114.3)
2.18"
(55.4)
4.50"
(114.3)
3.88"
(98.6)
2.88" 3.88"
(73.2) (98.6)
4.50"
(114.3)
4.50" 3.88"
(114.3) (98.6)
1.50" NPT
H660A
HBL26401
.22"
(5.6) .41"
(10.4)
2.88"
(73.2)
3.53"
(89.7)
HBL26402
HBL26404
Dimensions in Inches (mm)
B-68
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® and Safety Shroud Devices
Technical Information
15-30 Ampere Twist-Lock, 20-30 Ampere Safety-Shroud® Twist-Lock
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Fed. Spec. W-C-596 (Insulgrip® and Safety-Shroud®).
Certified to CSA Standard C22.2 No.42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Plugs and Connector
15-30A
Bodies (Insulgrip®)
Blade/Contact Carrier
Natural (white) nylon
Terminal Retainer
Clear polycarbonate
Cover (Housing)
Black nylon (yellow in “CM” devices)
Cord Clamp
Natural (white) nylon
Dust Shield
EPDM
Blades/Contacts
Brass
Terminal Clamp
Cold rolled steel – nickel plated
Terminal Screws
15A (8-32), 20-30A (10-32) Brass (white
finish on neutral screw when used)
Grounding Screw
Brass (green finish)
Cord Clamp Screws
Steel, zinc plated
Body Holding Screws
Steel, zinc plated
Safety-Shroud®
Receptacles Angle,
Surface Semi-Flush
Housing and
Mounting Flange
Mounting Plate
(Angle Housing Only)
Body Contact Carrier
Terminal Retainer
Body Holding Screws
Contact Springs
Spring Binding Plate
Terminal Clamp
Terminal Screws
Grounding Screw
Mounting Plate Screws
Wallplate Mounting
Screws
20-30A
Gray Valox®
Galvanized steel
Natural (white) nylon
Clear polycarbonate
Steel, zinc plated
Brass
Brass
Steel, nickel plated .080" curved, scalloped
10-32 Brass (white finish on neutral screw
when used)
Brass (green finish)
Steel, zinc plated
Steel, zinc plated
Flanged Inlet/
Receptacles
15-30A
Flanged Casing
Natural (white) nylon
Blade/Contact Carrier
Natural (white) nylon
Terminal Retainer
Clear polycarbonate
Safety-Shroud®
Twist-Lock® Plug
Blades/Contacts
Brass
Insulgrip Plug with Safety-Shroud installed
Drive Screws
Steel, zinc plated
Terminal Clamp
Cold rolled steel, nickel plated
Safety-shroud
Cord Clamp
Terminal Screws
15A (8-32), 20-30A (10-32) Brass (white
finish on neutral screw when used)
Performance (Twist-Lock® and Safety Shroud Devices)
Grounding Screw
Brass (green finish)
Mounting Screws
Screw Sizes
Nickel plated brass round head screws
15A: 6-32, ³⁄₈" long
20A and 30A: 8-32, ⁷⁄₁₆" long
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Receptacle, Single
15A
Temperature Rise
Fed. Spec.
20A and 30A
Nylon (Black)
Nylon (Black)
Base
RTP (Black)
RTP (Natural)
Contact Springs
.031" Brass
.040" Brass
Clamp
.031" Brass
.040" Brass
Ground Contact
.031" Brass
.040" Brass
–
.015" Brass
.050" Steel,
zinc plated
–
Bridge (Mounting
Strap)
White Valox®
White nylon
Electrical
Cover (Top)
Ground Shunt
20-30A
End Plates (Mounting)
–
.050" Brass
Back Plate
–
.040" Brass
Terminal Screws
Brass (8-32)
Brass (10-32) (white finish on
neutral screw when used)
Grounding Screw
Brass (Green)
Bronze (Green)
Flat Head Mounting
Screws
Steel, zinc plated
Steel, zinc plated
Auto Ground Clip
Stainless steel
Stainless steel (Used only
on IG receptacle)
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full
rated current.
Max 30°C temperature rise at full rated current
after 250 cycles of overload at 200% of rated
current at a power factor of 75% (WC 596).
Mechanical (Twist-Lock® and Safety Shroud Devices)
Cord Accommodation
Round portable service cords of diameters
(Plugs and connectors
commensurate with the device rating as defined
only)
in UL Standard 62, CSA C22.2 No. 49.
Cord Grip
15A: .230"-.720" (5.8-18.3); 20A and 30A 3W:
Accommodation
.360"-.930" (9-24); 20A and 30A 4W-5W:
(Insulgrip)
.350"-1.150" (9-29).
Terminal Identification
Terminals identified in accordance with
UL 498 (X, Y, Z, White, Green).
Terminal
20A and 30A, #16-#8 AWG. 15A, #18-#10 AWG.
Accommodation
Solid or stranded copper wire only.
Product Identification
Ratings are a permanent part of the device housing.
Environmental (Twist-Lock® and Safety Shroud Devices)
Flammability
HB or better per UL94/CSA 22.2 No. 0.17.
(Enclosure)
Plugs, Connectors,
V2 or better.
Flanged Receptacles
and Flanged Inlets
Receptacles (Box Mount)
Operating
Maximum Continuous 75°C.
Temperatures
Minimum -40°C (w/o impact).
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-69
Watertight Safety-Shroud® Twist-Lock® Devices
Technical Information
20 and 30 Ampere
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Certified to CSA Standard No.42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Fed. Spec. WC-596.
UL Listed, CSA Certified to Type 4, 4X and Type 12.
Part
Materials
Watertight Safety-Shroud® Plug (Insulgrip®)
20 and 30A
Blade Holder
Terminal Retainer
Cover (Housing)
Cord Clamp
Blades
Terminal Clamp
Terminal Screws
Grounding Screw
Cord Clamp Screws
Body Holding Screws
Closure Cap and Strap
Natural (white) nylon
Clear polycarbonate
Black Valox®
White Valox®
Brass
Steel, nickel plated .080" curved scalloped
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304, combination head
Stainless steel 302/304, combination head
Neoprene EPDM Blend
Watertight Safety-Shroud® Connector (Insulgrip®) 20 and 30A
Body Contact Carrier
Terminal Retainer
Contact Spring
Spring Binding Plate
Cover (Housing)
Cord Clamp
Terminal Clamp
Terminal Screws
Grounding Screw
Cord Grip Screws
Body Holding Screws
Closure Cap and Strap
Natural (white) nylon
Clear polycarbonate
Brass
Brass
Black Valox®
White Valox®
Steel, nickel plated .080" curved scalloped
10-32 brass (white finish on neutral screws when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304, combination head
Stainless steel 302/304, combination head
Polypropylene with Neoprene gasket
Watertight Safety-Shroud Receptacle, Single*
20 and 30A
Housing and Flange
Body Contact Carrier
Terminal Retainer
Drive Screws
Contact Spring
Spring Binding Plate
Terminal Clamp
Flange Gasket
Lid Gasket
Cover Hinge Pin
Cover Spring
Terminal Screws
Grounding Screw
Mounting Screws
Gray Valox
Natural (white) nylon
Clear polycarbonate
Steel, zinc plated
Brass
Brass
Steel, nickel plated .080" curved, scalloped
Closed-cell neoprene foam
Closed-cell neoprene foam
Stainless steel 302/304
Stainless steel 302/304
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304 combination head
Watertight Safety-Shroud® Flanged Inlet
20 and 30A
Housing and Flange
Blade Holder
Terminal Retainer
Blades
Drive Screws
Terminal Clamp
Terminal Screws
Grounding Screw
Closure Cap
Mounting Screws
Gray Valox
Natural (white) nylon
Clear polycarbonate
Brass
Steel, zinc plated
Steel, nickel plated .080" curved scalloped
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Neoprene EPDM blend
Stainless steel 302/304 combination head
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Cord Accommodation (Plugs and connectors only)
Cord Grip Accommodation
Terminal Identification
Terminal Accommodation
Product Identification
Environmental
Moisture Resistance
Flammability (Enclosure)
Operating Temperatures
Note: *Suitable for use as a flanged receptacle.
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 250 cycles of overload at
200% of rated current at a power factor of 75% (WC 596).
Round portable service cords of diameters commensurate with the device rating
as defined in UL Standard 62, CSA C22.2 No. 49.
20 and 30A, 3W: .32"-.93" (8.1-24.0mm) #16-3 Type SJ-#8-3 Type S, SO;
20 and 30A, 4W: .35"-1.15" (9.0-29.2mm) #16-4 Type SJ-#8-4 Type S, SO;
20 and 30A, 5W: .35"-1.15" (9.0-29.2mm) #16-5 Type S, SO - #8-5 Type S, SO.
Terminals identified in accordance with UL 498 (X, Y, Z, White, Green).
#16- #8 AWG solid or stranded copper wire only.
Ratings are a permanent part of the device blade holder, and are also labeled on device
color coded by voltage, visible in use. Catalog No. I.D. is on device visible in use.
Type 4, 4X, 12, IP66 suitability.
V0 per UL94 or CSA 22.2 No. 0.17.
Maximum Continuous 75°C; Minimum -40°C (w/o impact).
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
B-70
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Technical Information
50 Ampere
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Certified to CSA Standard No. 42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Part
Materials
Part
Materials
Plug (Twist-Lock)
50A
Flanged Inlet
50A
Blade Holder
Power Blades
Terminal Set Screw
Terminal Retainer
Thermoplastic polyester (black)
Brass
Stainless steel
Thermoplastic polyester
Flanged Casing
Blade Holder
.062" Steel, zinc plate
Phenolic
Pressure Screws
Steel, zinc plate
Blades
.100" Brass
Front and Rear (housing)
Supertough nylon
Cord Clamp
Seal
Thermoplastic polyester (white)
Neoprene
Ground Spring
Terminals
Grounding Terminal
.025" Bronze
.050" Steel, brass finish
.062" Copper, green finish
Seal Cup
Nylon
Round Head Screws
Steel, zinc plate
Box Terminal
Latches
Copper
Supertough nylon
Receptacle
50A
One piece copper/nickel
Body
Face
Phenolic
Phenolic
.100" Brass alloy
.100" Brass
Ground Contact Spring
Cord Clamp Screws
302/304 Stainless steel
Shroud
302/304 Stainless steel
Contact Springs
Contact Binding Plates
Connector (Twist-Lock)
50A
Ground Contact
.031" Brass
Contact Nose
Terminal Retainer
Nylon (black)
Thermoplastic polyester (black)
Insulator
Bridge (Mounting Strap)
.093" Laminated phenolic
.062" Steel, zinc plate
Terminal Set Screw
302/304 Stainless steel
Pressure Screws
Steel, zinc plate
Contact Spring
Assembly Ring
Front and Rear (housing)
Latches
Brass
302/304 Stainless steel
Supertough nylon (black)
Supertough nylon (white)
Terminals
Casing
Center Pin (CS Devices)
.050" Steel
.062" Steel, zinc plate
Steel, zinc plate
Cord Clamp
Box Terminal
Contact Holder
Ground Contact
Thermoplastic polyester (white)
Copper
Thermoplastic polyester (black)
One piece copper/nickel
Seal Cup
Cord Grip screws
Nylon
302/304 Stainless steel
Seal
Neoprene
Product Identification
Ratings
Catalog Number
Molded into face for all devices and stamped into stainless steel shroud on plug devices.
Molded into face for plug and connector bodies and stamped into stainless steel shroud on plug devices.
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full rated current.
Max. 30°C temperature rise at full rated current after 50 cycles of overload at
150% rated DC current (UL 498).
Mechanical
Terminal Accommodation
Cord Grip Accommodation
#10 AWG min. - #6 AWG max. Solid or stranded copper wire only.
.750"-1.150" (19.1-29.2).
Environmental
Flammability
Operating Temperatures
UL 94 V0 for Receptacles and Inlets. HB or better for Plugs and Connectors.
Maximum continuous 75°C; minimum –40°C (w/o impact).
Note: Please consult the factory for product dimensions and specifications for other products listed in this catalog.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-71
Switched Safety Enclosures
Technical Information
Switched Twist-Lock® and Hubbellock® Enclosures
Specifications
Typical Specifications
Manufacturer’s Identification
Hubbell SETL3/SEHBL3-SE2730A.
Description
Electrical Type
Lockable Switched Enclosure. This unit is a complete enclosure ready
to accept any 20 or 30A Twist-Lock or 30A Hubbellock receptacle.
2 Pole + Earth through 4 Pole and Earth.
Rating
20 or 30A, 125V through 3ØY 347/600V AC.
Configuration
NEMA Locking L5-20R through L23-30R.
Enclosure Type
Outdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.
Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids, with Knockout).
Non-metallic enclosure suitable for metallic conduit.
Enclosure Material
Materials
Part
Materials
Base
Valox®
Top
Handle
Valox®
Valox®
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Frame
Zinc ¾" watertight
Neoprene
Valox®
Molded neoprene
Galvanized steel
Lift Cover
Valox®
Enclosure Screws
Hinge Spring and Pin
Stainless steel 300 series
Stainless steel 300 series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand
Operations
Withstands 3,000V minimum.
600V RMS.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 10,000
RMS symmetrical amperes at the voltage rating of the receptacle.
Mechanical 10,000 cycles;
Electrical 6,000 cycles.
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Weight
Mounting
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of external label and receptacle face.
3.5 pounds.
External fully adjustable feet.
Environmental
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Outdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.
Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids, with Knockout).
UL94 – 5 VA and V0 classification.
Maximum continuous +75°C;
Minimum continuous -40°C.
All materials are UV stabilized.
8Y^O$
>RS]
NO`SMO
Z\Y`SNO]
YXYPP
]aS^MRON
MYX^\YV
YP
K
ZV_Q
MYXXOM^ON
VYKN
KXN
SXMV_NO]
VYMUY_^
Z\Y`S]SYX$
98900
MYX^\YV
UXYL
SX
^RO
900
ZY]S^SYX
KMMOZ^]
_Z
^Y
K
5 ⁄₁₆" (8.0) diameter shackle of suitable padlock lockout device to isolate energy from the receptacle and cord connected equipment as a method of compliance to
OSHA Lockout/Tagout Regulation 29CRF Part 1910.147.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
B-72
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Safety Enclosures
Technical Information
Mechanical Interlock Switched Safety Enclosures
Specifications
Typical Specifications
Manufacturer’s Identification
Hubbell HBLMITL.
Description
Electrical Type
Circuit-Lock Mechanical Interlock.
2 Pole + Earth through 4 Pole and Earth.
Rating
Up to 30A, 3Ø 600V AC.
Enclosure Type
Outdoor – 4X (Watertight, Washdown);
Indoor – 12K (Dust-tight, Falling Dirt and noncorrosive liquids with knockout.
IP66 suitability.
Enclosure Material
Non-metallic enclosure suitable for metallic conduit.
Materials
Part
Material
Base
Valox®
Top
Valox®
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Frame
Valox®
Zinc ¾" watertight
Neoprene
Valox®
Neoprene
Galvanized steel
Enclosure Screws
Stainless steel 300 series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
Operations
Withstands 3,000V Min.
600V RMS.
Certified for current interrupting at full rated current voltage.
Suitable for use on a circuit capable of delivering not more than 10,000
RMS symmetrical amperes at the voltage rating of the receptacle.
Mechanical 10,000 cycles;
Electrical 6,000 cycles.
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Weight
Mounting
In accordance with UL 746C.
In accordance with UL, CSA.
Identification and ratings are part of the external label and receptacle face.
3.5 pounds.
External full adjustable feet.
Environmental
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Outdoor – 4X (Hose-Directed Water, Corrosion Resistance), IP66 suitability.
Meets UL 94V0 material classification.
Maximum continuous +75°C;
Minimum continuous -40°C.
All exposed materials are UV stabilized.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-73
Twist-Lock® Devices
Technical Information
Valise® Plugs and Connectors
Specifications
Plugs
Part
Material
Typical Specification - Catalog No. HBL4723VY.
Plug
15, 20 and 30A
Description - Straight Body Plug
Type – 2 Pole, 3 Wire, Grounding
Housing
Blades
Nylon
Brass
Rating – 15 and 20A 125V, 250V, and 277V AC, 30A 125 and 250V
Ground Blade
Brass
Certification – UL Listed File E1706, CSA Certified
Terminal Screws
Steel multiple drive
IP SUITABILITY – IP20
Cable Inserts
Terminal Clamps
Polyphenylene Oxide
CR Steel
Body Holding Screws
Steel multiple drive
Connector Bodies
Part
Material
Typical Specification- Catalog No. HBL4729VY
Connector
15, 20 and 30A
Description – Straight Body Connector
Type – 2 Pole, 3 Wire, Grounding
Housing
Contact and Ground Springs
Nylon
Brass
Rating – 15 and 20A 125V, 250V, and 277V AC, 30A 125 and 250V
Terminal Screws
Steel multiple drive
Certification – UL Listed File E1706, CSA Certified
IP SUITABILITY – IP20
Cable Inserts
Terminal Clamps
Body Holding Screws
Polyphenylene Oxide
CR Steel
Steel multiple drive
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V, 250V or 277V AC as rated.
Certified for full rated current.
Max. 30°C temperature rise at full rated current after 50 cycles
of overload at 150% rated DC current.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Torque
Screw Color per UL 498 (Brass, White and Green).
15A-18 to 12AWG. Solid or stranded copper wire only.
20A-18 to 10AWG. Solid or stranded copper wire only.
30A-14 to 8AWG. Solid or stranded copper wire only.
Molded rating on device face.
12 in-lb terminal screws, 7 in-lb assembly screws.
Cord Range
15A
20A
30A
.220" to .660" (5.6mm to 16.8mm).
.325" to .720" (8.26mm to 18.3mm).
.590" to .930" (15.0mm to 23.6mm).
Environmental
Flammability
Operating Temperature
UL 94HB.
Maximum continuous 75°C, minimum -40°C (w/o impact).
Standards
Listed to UL Standard UL498
Certified to CSA Standard C22.2 No. 42
B-74
®
Wiring Device-Kellems
www.hubbell-wiring.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement