Canon | AXIS 1610 | AXIS 1610 Print Server

AXIS 1610 Print Server
For Canon CAPT Printers
Convenient printing distribution
The AXIS 1610 single port print server can be directly
connected to any Canon CAPT printer, allowing you to easily
share your printer resources with anyone on your network.
Based on Axis ThinServer Technology, the AXIS 1610 requires
no additional cabling and can be managed and configured
using any standard Web browser via TCP/IP.
Speed and Reliability
The AXIS 1610 print server provides high performance and
reliability combined with low power consumption. The
electronic circuits are based on Axis ’improved ETRAX 100
chip, which comprises an integrated 32-bit RISC processor and
associated network controllers. The AXIS ETRAX 100 chip has
been specifically designed for LAN products and results in a
faster throughput than is possible with a direct PC-to-printer
connection. High-speed Centronics communication, such as
ECP, High Speed and IBM Fast Byte, is supported as well.
Pocket-sized
The AXIS 1610 is small and compact, equipped with one
high-speed parallel port connector that plugs directly into
the printer´s parallel port.
Supported Environments
The AXIS 1610 installs in minutes, using the AXIS NetPilot
installation software and the AXIS CAPT Print Monitor.
The AXIS 1610 supports printing using the NetBIOS/
NetBEUI and the TCP/IP protocol from the following clients:
Windows 95, Windows 98, Windows NT 4.0, Windows ME,
Windows 2000, Windows XP (TCP/IP only), Windows Server
2003 (TCP/IP only).
Security
Installation and Integration
Quick and Easy Installation
A password can be assigned to restrict unauthorized
configuration of the AXIS 1610.
Monitoring
Axis’ NetPilot software and AXIS 1610 internal web pages
allow you to continuously monitor printer status. Additionally,
the AXIS 1610 supports SNMP for remote monitoring.
Future proof
You can upgrade the AXIS 1610 Flash memory over the
network. This allows you to quickly update and enhance
the operational features of the AXIS 1610 when new print
server software becomes available.
The installation of the AXIS 1610 and its integration into
the network is performed using any of the following client
software, which is provided with your print server:
AXIS NetPilot ™, AXIS CAPT Print Monitor and Canon
NetSpot.
Configuration and Management
Configuration and management of the AXIS 1610 can be
performed using TCP/IP, NetBIOS/NetBEUI or IPX protocols.
AXIS 1610 Print Server
Supported Systems
Hardware
Microsoft Windows:
• Windows Server 2003
• Windows XP
• Windows 2000
• Windows NT ver. 4.0
• Windows ME
• Windows 98
• Windows 95
32 bit 100 MHz RISC Controller,
1 Mbyte Flash memory.
2 Mbytes DRAM.
Printing Protocols
Windows:
• NetBIOS/NetBEUI
• TCP/IP
Management Protocols
NetWare:
• IPX
Windows:
• NetBIOS/NetBEUI
• TCP/IP
• WINS
TCP/IP:
• FTP, BOOTP, ARP, RARP, DHCP ICMP
IGMP, IP, TCP, UDP, HTTP, SNMP,
TFTP
Network Management
SNMP-MIB II compliant (over
UDP/IP), Axis MIB, Host Resources
MIB, Printer MIB and CANON-MIB
included.
Running simultaneously any
combination of the supported
protocols. Use of IEEE802.2, IEEE802.3,
SNAP and Ethernet II frame types
simultaneously.
Attachments
RJ-45 connector (Category 5
Unshielded Twisted Pair) for 10baseT
Ethernet and 100baseTX Fast Ethernet.
Security
A Root password protects the
configuration settings.
Parallel Printer
One IEEE 1284 compliant high-speed
parallel port, 36-pin Centronics
connector. Sustained throughput of up
to 800 kbytes/s (100baseTX) and 600
kBytes/s (10baseT). ECP support.
Height x Width x Depth
0.9 x 2.4 x 4.8 inches
(2.4 x 6.1 x 12.1 cm)
Weight
0.22 lb. (0.1 kg)
Environmental
Temperature: 40 - 105° F (5 - 40° C).
Humidity: 10 - 95% non-condensing.
Approvals
EMC:
• EN 55022/1994
• EN50082-1/1992
• FCC Class A.
Safety:
• EN 60950.
Front Panel
2 LED indicators:
• Power and Network.
• Test button.
Power Consumption
Power provided by external supply:
Maximum 200 mA at 12 VDC.
(Type PS-B, 12V, 500 mA).
www.axis.com
©2000-2003 Axis Communications AB. Axis is a registered trademark, and ThinServer is a trademark of Axis Communications
AB. All other company names and products are trademarks or registered trademarks of their respective companies.
We reserve the right to introduce modifications without notice.
21223/EN/R2/0312
WWW:
• Netscape Navigator 3.0 and above
• MS Internet Explorer 3.0 and above.
Logical Connection
Dimensions
Download PDF

advertising