RichardSolo JK001 Instruction manual

20800 mAh 3-Port Power Bank
INSTRUCTION MANUAL
Thank you for purchasing the RichardSolo 20800 mAh 3-Port Power Bank. Please read these
instructions before operation and save for future reference.
1
6
7
2
4
3
1
USB output port 1 (5V 1A)
5
LED flashlight
2
USB output port 2 (5V 1.5A)
6
Power button
3
USB output port 3 (5V 2.1A)
7
4 LED charge capacity indicators
4
Micro-USB input port (5V 1.5A)
(25%, 50%, 75%, 100%)
5
Charge 20800 3-Port Power Bank:
onnect included USB/micro-USB cable to Power Bank
1 C
micro-USB input port (4).
2 Charge via any powered USB port. Use AC/USB adapter
(not included) for faster results.
3 LEDs (7) flash in 25% increments and remain solid when
corresponding capacity* is reached.
*Note: LEDs may not provide an accurate reading while
battery is recharging. For optimum performance, make sure
all LEDs have stopped flashing and remain solid to ensure
full charge capacity. Total recharge time from 0% - 100% =
+/- 14 hours.
Charge your device:
1 Connect USB charge cable included with your device to Port 1, Port 2, or Port 3.
2 Press power button (6) to begin charging. Monitor charge status via screen icon
on your device.
3 Use Port 1/Port 2 for iPhone, iPod, iPad Mini, smartphones, and smaller 1A
devices.
4 Use Port 3 for iPad and larger 2.1A devices.
5 To stop charging, remove cable from your device.
*Note: Power Bank LEDs remain lit while device is charging and show remaining
battery capacity. When no connection is detected for 20 seconds, Power Bank shuts
off. When device is fully charged, Power Bank will trickle charge device until Power
Bank is disconnected or completely discharged.
Tandem charge* (charge Power Bank/device simultaneously):
1 Connect your own USB cable from device
to Power Bank Port 1, Port 2, or Port 3.
3 Connect included USB/micro-USB cable from
AC/USB adapter to Power Bank input port (4).
2 Press power button (6) to begin charging.
4 Device charges first followed by Power Bank.
5 M
onitor charge status for device on its screen.
6 M
onitor charge status for Power Bank via 4
built-in LEDs (7).
*Note: total recharge time is longer in tandem mode.
Check remaining charge capacity /
Use LED flashlight:
ress power button (6) once to check remaining
1 P
Power Bank charge capacity. 1 LED flashing = less than
25%; 1 LED solid = about 25%; 2 LEDs = about 50%;
3 LEDs = about 75%; 4 LEDs = about 75-100%.
2 P
ress power button (6) twice to illuminate built-in LED
flashlight (5). Press twice to switch off.
Specifications
Capacity: 20800 mAh
Cell Type: Li-ion battery
Input: DC 5V 1A
Port 1 Output: DC 5V 1A
Port 2 Output: DC 5V 1.5A
Port 3 Output: DC 5V 2.1A
Size: 0.87” x 3.15” x 6.3”
Weight: 15.1 oz. (429 gr)
Package
Contents
• 20800 mAh
3-Port
Li-ion battery
• USB/micro-USB
charge cable
• Instructions
Questions? Please email us at: [email protected]
USB Compatibility
Maintenance
Port 1 (1A): iPhone/iPod, smartphones,
MP3 players (standard charge)
o not store in a depleted state —
1 D
battery power cells can be damaged.
Charge Power Bank at least once per
month when not in use.
Port 2 (1.5A): iPhone/iPod, smartphones,
MP3 players (slightly faster charge)
2
Port 3 (2.1A): iPad/tablets + iPhone/iPod,
smartphones, MP3 players (best for larger
devices)
o not clean with harsh chemicals,
3 D
soaps or detergents.
K
eep unit dry — avoid damp
conditions and corrosive materials.
Safety Instructions
Read all instructions and warnings prior to using this product. Failure to read and follow these
safety instructions could result in fire, explosion, electrical shock or other hazard causing
serious and/or fatal injury and/or property damage.
1 Do not modify, disassemble,
open, drop, crush, puncture
or shred this product.
3 Avoid excessive heat
(open flame, sunlight,
etc.).
2 Do not expose this product
to rain or water.
4 Keep away from high
voltage devices.
2301 Kerner Blvd. Suite C, San Rafael, CA 94901 USA
5 T his product is not
a toy — keep away
from children.
www.RichardSolo.com