Cadillac | 2005 STS | 2005 Cadillac STS Navigation System

2005 Cadillac STS Navigation System
Overview ........................................................
Overview
..................................................
Features and Controls .....................................
Features and Controls
................................
Navigation Audio System ................................
Navigation Audio System
............................
Voice Recognition ...........................................
Voice Recognition
......................................
1-1
1-2
2-1
2-2
3-1
3-2
4-1
4-2
M
Vehicle Customization ..................................... 5-1
Vehicle Customization ................................. 5-2
Phone ............................................................ 6-1
Phone
...................................................... 6-2
Index ................................................................ 1
Keep this manual with the owner manual in the vehicle,
so it will be there if it is needed while you are on the
road. If the vehicle is sold, leave this manual and
the owner manual with the vehicle.
GENERAL MOTORS, GM, the GM Emblem, CADILLAC,
the CADILLAC Crest & Wreath and the name STS are
registered trademarks of General Motors Corporation.
DTS and DTS Digital
Surround are registered
trademarks of Digital
Theater Systems, Inc.
The information in this manual supplements the owner
manual. This manual includes the latest information
available at the time it was printed. We reserve the
right to make changes in the product after that
time without notice.
Litho in U.S.A.
Part No. 10376371 A First Edition
ii
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
Manufactured under license from Dolby® Laboratories.
Dolby® and the double-D symbol are trademarks of
Dolby® Laboratories. Confidential unpublished works.
Copyright 1992–1997 Dolby® Laboratories. All rights
reserved.
©
2004 General Motors Corporation. All Rights Reserved.
Section 1
Overview
Overview .........................................................1-2
Navigation System Overview ............................1-2
Getting Started ...............................................1-3
1-1
Overview
Navigation System Overview
1-2
A. Display Screen.
B. Map DVD Eject Key. See “Hard Keys” under Using
the Navigation System on page 2-2 for more
information.
C. Map DVD Loading Slot.
D. CD/DVD Changer Loading Key. See Six-Disc
CD/DVD Changer on page 3-12 for more information.
E. CD/DVD Changer Eject Key. See Six-Disc CD/DVD
Changer on page 3-12 for more information.
F. CD/DVD Changer Loading Slot.
G. Power/Volume Knob. See “Hard Keys” under Using
the Navigation System on page 2-2 for more
information.
H. Navigation Screen Tilt Key (in/out). See “Hard Keys”
under Using the Navigation System on page 2-2
for more information.
I. SRCE (Source) Key. See Six-Disc CD/DVD Changer
on page 3-12 for more information.
J. Audio Key. See Six-Disc CD/DVD Changer on
page 3-12 for more information.
K. CONFIG Key. See Configure Menu on page 2-49 for
more information.
L. Navigation Voice Prompt Repeat Key. See “Hard
Keys” under Using the Navigation System on
page 2-2 for more information.
M. Seek/Scan Key (up/down). See Six-Disc CD/DVD
Changer on page 3-12 for more information.
N. BAND Key. See Six-Disc CD/DVD Changer on
page 3-12 for more information.
O. AUX (Auxiliary) Key. See “Hard Keys” under Using
the Navigation System on page 2-2 for more
information.
P. ROUTE Key. See Enter Destination on page 2-6 for
more information.
Q. Map Key. See “Hard Keys” under Using the
Navigation System on page 2-2 for more information.
R. Tune Knob. See Six-Disc CD/DVD Changer on
page 3-12 for more information.
Getting Started
Before you begin to operate the navigation system, read
this manual thoroughly to become familiar with it and
to understand how the system works.
The navigation system allows you to do the following:
• Plan a route with provided turn-by-turn route
and map guidance with voice prompts.
• Select a destination using various methods and
choices.
• Receive broadcast announcements on traffic and
emergency alert communications.
1-3
The information in the system may not always be
complete. Road conditions such as prohibited turns,
detours, and construction zones, change frequently. It is
important to consider whether you can follow the
directions given by the system for the current conditions.
When getting started you may set the navigation system
to your preference using various options. To do so,
reference the following topics:
• To adjust screen appearance, see “Screen
Appearance” under Configure Menu on page 2-49.
• To adjust the clock and other time options,
see “Clock” under Configure Menu on page 2-49.
• To plan a route, see Enter Destination on page 2-6.
• To adjust the volume of voice guidance prompts
or voice recognition, see “Navigation Set Up”
under Configure Menu on page 2-49.
Each time you first start your vehicle and turn on the
navigation system by touching the map hard key,
you will see this screen. You can touch Agree to
proceed into the system, or the globe symbol in the
lower left corner of the screen to change the language
of the system. For more information on changing
the language, see Personalization on page 5-2.
1-4
Section 2
Features and Controls
Features and Controls ......................................2-2
Using the Navigation System ...........................2-2
Enter Destination ............................................2-6
Stored Locations ...........................................2-28
Maps ..........................................................2-41
Symbols ......................................................2-43
Keyless Access System .................................2-47
OnStar® System ...........................................2-48
Configure Menu ............................................2-49
Global Positioning System (GPS) ....................2-59
Vehicle Positioning ........................................2-60
Problems with Route Guidance .......................2-61
If the System Needs Service ..........................2-62
Ordering Map DVDs ......................................2-62
Database Coverage Explanations ....................2-62
2-1
Features and Controls
Using the Navigation System
This section presents basic information you will need to
know to operate the navigation system.
Use the hard keys located on the navigation system
along with the available touch screen buttons on
the navigation screen to operate the system. See
Navigation System Overview on page 1-2 for more
information.
Once the vehicle is moving, various functions will be
disabled to reduce driver distractions.
Hard Keys
The following hard keys are located on the navigation
system:
Z (Map DVD Eject):
Press the eject key located
next to the map DVD loading slot to eject the map DVD.
The map DVD slot is the slot directly below the display
screen.
M (Load): Press the CD/DVD changer loading key to
go to the loading screen and begin loading DVDs or
CDs. See Six-Disc CD/DVD Changer on page 3-12 for
more information.
2-2
Z (CD/DVD Eject):
Press the eject key next to the
CD/DVD changer loading slot to begin ejecting DVDs or
CDs. See Six-Disc CD/DVD Changer on page 3-12
for more information.
On (Power/Volume):
Press the power/volume knob
to turn the audio system on and off. Turn the knob to
increase or decrease the volume to the audio system.
ymz (Tilt): Press the up arrow on the tilt key to tilt
the navigation screen forward. Press the down arrow
on the tilt key to tilt the screen rearward. There are three
tilt positions to choose from.
BAND: Press the BAND key to change bands. The
BAND key will toggle among the bands available, FM,
AM, XM, and WX. See Navigation Audio System
on page 3-2.
SRCE (Source): Press the source key to switch
between the audio sources. Pressing this key will switch
between the radio and the CD/DVD player. See
Navigation Audio System on page 3-2.
AUX (Auxiliary): Press the AUX key to access screens
from which you will operate Bluetooth®, OnStar®, or
control video input. See Bluetooth® Phone on page 6-2.
e (Audio):
Press the audio key to access the Audio
Adjust screen, where you can adjust your base,
mid, fade, balance and DSP settings. See Navigation
Audio System on page 3-2.
ROUTE: Press the ROUTE key to access the
Destination Entry screen or the search area and begin
planning a destination. See Enter Destination
on page 2-6.
CONFIG (Configure): Press the CONFIG key to
access the desired SET UP Function screen. See
Configure Menu on page 2-49.
) (Map):
Press the map key to access the map screen.
k (Navigation Repeat): Press the navigation repeat
key to repeat the last voice guidance prompt, while
you are on a route.
y©¨z (Seek/Scan):
Press the seek/scan arrows
to go to the next or previous radio station and stay
there, or press and hold to scan stations. See Navigation
Audio System on page 3-2.
Tune Knob: Turn the tune knob to go to the next or
previous radio station and stay there. See Navigation
Audio System on page 3-2.
Alpha-Numeric Keypad
Letters of the alphabet, symbols, punctuation, and
numbers, when available to you, will be displayed on
the navigation screen as an alpha or numeric keypad.
The alpha keypad will be displayed when the system
needs you to input a city or street name. You can also
touch the symbol button (Sym.) at the bottom of the
alpha keypad to access the numeric keypad when
inputting a house address, punctuation mark, or other
character. There are three pages of different symbols
available. Touch A - Z to return to the alpha keypad.
Touch Others to get to a alpha keypad with special
characters. There are two pages of characters available
under the Others selection. On either the Symbol or
Others screens, using the arrows at the bottom next to
the page numbers will navigate you through the rest
of the screens available.
All characters are touch-sensitive screen buttons. Touch
a character to select it.
U:
Select the space symbol on the A - Z screen to
enter a space between characters or the words of a
name.
V:
Select the backspace symbol if you have selected
an incorrect character.
2-3
To make your name selections easier, the system will
only allow you to select a character which can follow the
last one entered. For example, if you enter Z, you
would not be allowed to follow it with T. The system will
highlight the available characters and darken the
unavailable characters.
If you are unsuccessful when inputting a name, it may
need to be selected differently. It is also possible that the
map DVD database may not contain that information
or the correct search area has not been selected. See
Database Coverage Explanations on page 2-62 for
more information.
The following screens are some of the different alpha
keypads you will have access to:
2-4
Touch-Sensitive Buttons
Touch-sensitive screen buttons are located on the
screen. When you have successfully selected a screen
button, a beep will sound. These buttons will be
highlighted when a feature is available and dim when
they are unavailable. There are also some toggle screen
buttons that will be light blue when active and dark
blue when inactive.
2-5
Enter Destination
Press the ROUTE key to access the Destination Entry
screen. From this screen, you can choose from several
options to plan a route by entering destination points.
The DESTINATION ENTRY screen allows you to also
select the area included in the search for your
destination. A map of the United States and a part of
Canada divided into 11 regions is shown.
Before selecting a method of destination entry, review
the search area map to make sure your destination
is located in the highlighted region.
2-6
If you need to see a list of states included in the
highlighted region, or to change the region, touch
REGION from the DESTINATION ENTRY screen. The
SEARCH AREA screen will be displayed. Touch the
numbered screen button to the right of the search area
map that corresponds with the numbered region you
wish to choose or to view a list of states included in the
region selected. You may also touch the down arrow
to the right of the search area map to choose CAN for
Canada. Once your selection has been made, you
will see the area covered on the map highlighted. Touch
the back key to return to the DESTINATION ENTRY
screen. The new selection will be stored once you select
the back touch screen key.
To enter a destination, choose from one of the following
destination entry methods:
Address
The address destination entry method allows you to
input an address by providing the system with a house
number, street name, and city.
C (Address):
Touch this screen button to access the
ADDRESS screen. At this point you can choose to
enter the address one of three ways, either house
number first, street first or city first.
To use the house number first destination entry method,
do the following:
1. Touch the numeric keypad to input the house
number.
2. Touch the Street button to enter the street name
using the alpha keypad.
3. A list of available street names will be displayed if
there are less than 5 items available. You may
select the list screen button at any time to view the
available list. Select the correct street with the
correct prefix from the list.
4. The Navigation System will either display a list of
available cities or go to the map screen directly
based on the input.
If you choose Any City, the system will generate a list
of all cities containing that street name. If you choose
5 Nearest Cities, the system will generate a list of
the five nearest cities containing that street name.
5. Select the desired city name on the list.
A map screen will then appear with the destination
marked.
2-7
To use the street name first destination entry method,
do the following:
1. Select the Street screen button from the address
menu and start inputting the street name using the
alpha keypad. A list of available street names
will be displayed if there are less than 5 items
available. You may select the list screen button at
any time to view the available list.
2. Select the desired street name with the correct
prefix from the list (Dr., Ln., St., etc.).
3. The Navigation System will display a list of available
cities. Select the correct city from the list.
4. The numeric keypad will be displayed, allowing you
to enter the house number.
5. Press OK.
A map screen will then appear with the destination
marked.
To use the city name first destination entry method, do
the following:
1. Touch the City button.
2. Select from the choices shown on the City screen,
Any City, 5 Nearest Cities, Input City Name, or from
the Last 5 Cities used.
Using the Any City choice will take you back to the
house number first entry method.
2-8
Using the 5 Nearest Cities choice, the system will
display the 5 cities nearest your current position.
Using the Input City Name choice will allow you to
input the city name with the alpha keypad.
Using the Last 5 Cities choice, the system will
display a list of the last five city names used.
3. If using the alpha keypad, finish inputting the city
name and then touch the list touch screen button to
display a list of available cities. Choose a city from
the list. If choosing from one of the prior mentioned
lists, select the city from the list displayed.
4. The House number screen will be displayed. Input
the house number using the numeric keypad.
5. Select the Street screen button from the address
menu and start inputting the street name using the
alpha keypad. A list of available street names
will be displayed if there are less than 5 items
available. You may select the list screen button at
any time to view the available list.
6. Select the desired street name with the correct
prefix (Dr., Ln, St., etc.) from the list
A map screen will then appear with the destination
marked.
See “Getting Started on Your Route” later in this section
for more information.
Point of Interest (POI)
The Point of Interest (POI) destination entry method
allows you to choose a destination from the POI list.
Then, to use this destination entry method by inputting
the name, do the following:
1. Use the alpha keypad to enter the POI name.
Touch Sym. to view a list of symbols to add
when entering a POI, touch Others to view a list of
special characters you can choose from, or
touch A - Z to return to the alpha keypad.
2. A list of POIs will appear if there are fewer than five
POIs found using the information from the alpha
keypad input. You may also touch the List button at
any time to view available POIs.
3. Select the desired POI from the list.
A map screen will then appear with the destination
marked.
i (Point of Interest):
Touch this screen button to
access the POINT OF INTEREST screen. From
this screen you have three options to select/input your
destination. You can either input the name using
the alpha keypad, select a category from the category
list or select the city by touching the city name and then
using the alpha keypad.
2-9
To use this destination entry method by selecting a
category, do the following:
1. Touch the Category screen button from the POINT
OF INTEREST screen to view a list of POI
categories.
2. Choose a category, and then a sub-category.
3. The Navigation System will display available POIs
names in the selected sub-category or if the list is
too long the system will display the alpha keypad.
4. If the alpha keypad is displayed, input the POI name
until a list of available POIs appears. You may also
select the List screen button when it becomes
available.
5. Select the POI from the list.
A map screen will then appear with the destination
marked.
To use this destination entry method by selecting a city,
do the following:
1. Select the city screen button, then choose from Any
City, 5 Nearest Cities, Input City Name or from the
Last 5 Cities list. If you choose Any City, the system
will return to the name POI input method/screen. If
you choose 5 Nearest Cities, the system will
generate a list of the five nearest cities to your
current position. Or you can select from the last five
cities that were used. If you choose to input the city
name the system will display the alpha keypad.
2. Input the city name using the alpha keypad.
3. Select the desired city from the list displayed.
4. Use the alpha keypad to enter the POI name.
Touch Sym. to view a list of symbols to add
when entering a POI, touch Others to view a list of
special characters you can choose from, or
touch A - Z to return to the alpha keypad.
5. A list of POIs will appear if there are fewer than five
POIs found using the information from the alpha
keypad input. You may also touch the List button at
any time to view available POIs.
6. Select the desired POI from the list.
A map screen will then appear with the destination
marked.
See “Getting Started on Your Route” later in this section
for more information.
2-10
Map
The map destination entry method allows you to choose
a destination by scrolling on the map.
Then, to use this destination entry method, do the
following:
1. Touch the map for the desired area you wish to set
as your destination.
2. Use the zoom in/out function to view the direction of
the desired area.
3. Pressing/holding and dragging on the map will
activate fast scrolling. Press/touch once on the
area to which you would like to move the current
position mark.
4. On the map screen you will then see the destination
marked and the address information for the current
destination mark. Touch the destination screen
button or the waypoint screen button to save the
address as a destination or waypoint. Touching the
memory point screen button will store the address
as a memory point. Touching the POI screen button
will display the QUICK-POI screen.
I (Map):
Touch this screen button to enter the map
destination entry method.
See “Getting Started on Your Route” later in this section
for more information.
2-11
Intersection
The intersection destination entry method allows you to
set two intersecting streets as your destination.
To enter a destination using the intersection entry
method, do the following:
1. Enter the first of two streets in the intersection. The
List option may become available.
2. You may now choose a street from the list, or
continue to spell the street name to further
reduce the number of available items. Select the
street with the correct prefix (Dr., Ln., St., etc.).
3. After the first street has been chosen, enter the
second street name. The List option may again
become available.
4. You may now choose the second street from the
list, or continue to spell the street name to further
reduce the number of available items. Select
the street with the correct prefix (Dr., Ln., St., etc.).
After both streets have been chosen, a map
screen will then appear with the destination marked.
M (Intersection):
Touch this screen button to access
the INTERSECTION screen.
2-12
See “Getting Started on Your Route” later in this section
for more information.
Phone Number
The phone number destination entry method allows you
to choose a destination by entering a phone number
that is contained on the map DVD.
Then, to use this destination entry method, do the
following:
1. Input the area code and phone number of a POI
using the numeric keypad.
2. If the phone number can be found on the map
DVD, a map screen will then appear with the
destination marked.
See “Getting Started on Your Route” later in this section
for more information.
U (Phone Number):
Touch this screen button to
access the PHONE NUMBER screen.
2-13
Freeway Entrance/Exit
The freeway entrance/exit destination entry method
allows you to choose a destination by entering a freeway
entrance or exit point.
K (Freeway Entrance/Exit): Touch this screen button
to access the FREEWAY ENT/EXIT screen.
Then, to use this destination entry method, do the
following:
1. Touch the Freeway screen button and enter the
freeway name. Be sure to use abbreviations,
such as I - 75, rather than spelling out Interstate.
Touch Sym. to view a list of symbols to add
when entering a freeway name, touch Others to
view a list of special characters you can choose
from, or touch A - Z to return to the alpha keypad.
A list of freeways will appear.
2. Choose a freeway from the list, and then choose
whether you want an exit point or an entrance point.
You can choose an exit/entrance point from the list,
input it by name, or sort the list by distance or name.
If you choose to input the freeway name, the alpha
keypad will be displayed. Touch the alpha keypad to
enter the freeway exit or entrance name. Touch the
Name Sort screen button to sort the list by name.
Touch the Dist. Sort screen button to have the list
sorted by distance.
After choosing a point from the list, a map screen
will then appear with the destination marked.
See “Getting Started on Your Route” later in this section
for more information.
2-14
Emergency
The emergency destination entry method allows you to
enter a destination by choosing from three categories:
Police Station, Hospital, or Dealer.
Then, to use this destination entry method, do the
following:
1. Choose a category.
2. Choose a destination point from the list. Touch
Name Sort to sort the list by name, or Dist Sort
to sort the list by distance from the vehicle’s
current position.
After choosing a destination from the list, a map
screen will then appear with the destination marked.
See “Getting Started on Your Route” later in this section
for more information.
| (Emergency):
Touch this screen button to access
the EMERGENCY screen. When in this screen, the
system will display your current position address and the
longitude and latitude information.
2-15
Memory Points
Previous Destination
The memory points destination entry method allows you
to choose a destination from a list of points that you
have previously stored.
The previous destination entry method allows you to
choose a destination from a list of previous destination
points.
N (Memory Points):
Touch this screen button to
access the MEMORY POINTS screen.
Then, to use this destination entry method, do the
following:
1. Select the category/folder in which the memory
point has been stored. Choose from Personal,
Business, Entertainment or Marked Point folders.
2. Select the desired memory point within the selected
category/folder. Use the sort button to sort the
destinations within their category/folder. Touch the
Dist. screen button to sort the destination by
distance based on your current position. Touch the
Icon screen button to sort the destinations based
on the icon symbol. Touch the Date screen button to
sort the destinations based on the date they were
stored. Touch the Name screen button to sort
the destinations in alpha/numeric order.
See “Getting Started on Your Route” later in this section
for more information.
2-16
h (Previous Destination): Touch this screen button to
access the PREVIOUS DEST. screen. The system
will store up to 100 points that have been previously
input. As new destinations are entered, the system will
automatically delete the oldest destinations and add
the new entries.
Then, to use the previous destination entry method, do
the following:
1. Choose a previous destination from the list. Use the
arrow to the right of the destination to view the
entire destination name as necessary. Use the Sort
by Name/Date function as necessary. Also from
this menu you can select the previous start
point option. This option is available while the
vehicle is moving.
1.1. To use the previous start point option from
the PREVIOUS DEST. screen, choose the
Previous Start Point screen button.
1.2. The system will plan a route to the previous
point you were at when a route was entered.
Coordinates
The coordinates destination entry method allows you to
choose a destination by entering latitude and longitude
coordinates.
2. After choosing a destination from the previous
destinations list, a map screen will then appear
with the destination marked.
See “Getting Started on Your Route” later in this section
for more information.
) (Coordinates): Touch this screen button to access
the COORDINATES screen.
2-17
Then, to use this destination entry method, do the
following:
1. Touch N or S next to LAT. to enter the direction of
the latitude coordinate.
2. Input the numeric portion of the latitude coordinate
using the keypad.
3. Touch E or W next to LONG. to enter the direction
of the longitude coordinate.
Preset Destination
The preset destination entry method allows you to set a
destination by choosing from one of five previously
stored destinations. Besides home, these are the only
destinations available to set while the vehicle is
moving or by voice recognition. If a destination is not
set for one of the screen buttons, the button will
be dimmed and will not be available.
4. Input the numeric portion of the longitude coordinate
using the keypad.
5. Once both coordinates are entered, touch the OK
screen button.
A map screen will then appear with the destination
marked.
See “Getting Started on Your Route” later in this section
for more information.
2-18
j (Preset Destination): Touch this screen button to
access the PRESET DESTINATIONS screen.
Then, to use this destination entry method, do the
following:
1. Select the desired preset destination from the
DESTINATION ENTRY screen. The screen
buttons are numbered 1 - 5.
2. The system will then set the stored preset
destination as your current destination.
3. A map screen will then appear with the destination
marked and the number of the preset destination.
See “Getting Started on Your Route” and “Memory
Points” later in this section for more information.
Home
This feature allows you to plan a route to one previously
stored destination that you have selected as home. If
a home destination is not stored, the home button
will not be available. In addition to preset destinations
one through five, this destination is available to set while
the vehicle is moving or by voice recognition.
L(Home):
Touch this screen button to set your
destination as home.
To use this destination entry method, do the following:
1. From the DESTINATION ENTRY screen, touch
the home button.
2. The system will then set your stored preset home
destination as the current destination.
3. A map screen will then appear with the destination
marked.
Once your destination entry is complete, regardless of
which method of entry you used, a map screen with the
destination previewed will be displayed. You can
change route preferences, route options, map
appearances, or add a waypoint at this time. You may
also set the destination without making any further
changes. See “Getting Started on Your Route” following
in this section for more information on your choices
once a destination has been entered.
2-19
Getting Started on Your Route
Once you have entered a destination, you can perform
one of the following options:
h (Destination):
Touch the destination symbol to set
the entered destination as it is, without further
adjustment.
o (Waypoint):
Touch the waypoint symbol to enter
this point as a waypoint along the route.
2-20
Route Preference: Touch this screen button to access
the ROUTE PREFERENCES screen and adjust the route
preferences. The current setting is displayed in the Route
Preference section of the Map screen. See “Change
Route” later in this section for more information.
Once the route preferences have been set, touch the
Calculate screen button and the system will display the
map screen. From this screen, you can touch the Menu
screen button to access the NAV. (Navigation) MENU.
Nav. (Navigation) Menu
From this screen you can touch the menu screen button
to access the Nav. (Navigation) menu.
From this screen you can select Guide to start your route
guidance or select 3routes if available to select between
Quick, Normal or Short route options. You can also select
the Chg. Route screen button to go to the ROUTE
OPTIONS menu and select from the available options.
2-21
From this menu, you can choose Change Route or
Memory Points.
Change Route
Selecting Change Route from the Nav. Menu will take
you to the ROUTE OPTIONS menu. The availability
of these buttons depends on if a route is planned or if
you are driving a route. You can perform the following
functions from this menu:
2-22
H Search Conditn (Search Condition): This
option will take you to the SEARCH CONDITION screen.
% Detour:
From this screen, you can choose to detour
1 mile, 3 miles, or 5 miles around a the current route.
You may also choose to detour the whole route if
necessary. This option is only available while you are
driving on your current planned route.
The search condition screen allows you to view your
current destination and also change the planning
methods between each destination. Use the up/down
arrows to scroll through your routes. Use the available
route preference options to change your planning
method. Touch Calculate to plan the route.
2-23
F Route Pref. (Route Preferences): This feature will
take you to the ROUTE PREFERENCES screen.
W (Allow Toll Road): This feature allows the system
to use toll roads when calculating a route.
b (Allow Ferry):
This feature allows the system to
use ferries when calculating a route.
o Dest. & Way Pt. (Destination and Waypoint): From
this screen, you can choose to add or delete a
waypoint from your current route.
Touch any of the following options to turn them on and
off. If any of these features are turned off, there will
be a diagonal red line through its icon.
c (Allow Major Roads): This feature allows the
system to use major roads when calculating a route.
l (Allow Time Restricted Road):
This feature allows
the system to use time restricted roads when
calculating a route.
2-24
Select this button to plan a destination with waypoints.
Five waypoints and one destination can be entered.
9 Display route: From this screen, you can view the
entire route and choose to view a Turn List. From
the Turn List you can select the Avoid screen button if
desired, to avoid using selected turns. The system
will then re-plan your route based on your selections.
G Route Preview: From this screen, you can
preview the entire route in either direction, as well as
edit the route.
Use the touch-sensitive screen buttons at the bottom of
the navigation screen to move forward or backward
through the route.
s(Skip to Start): Touch this screen button to skip to
the starting position, previous waypoint or previous
POI depending on the mode selected.
S/{ (Scroll to Start):
Touch this screen button to
scroll to the starting position, previous waypoint or
previous POI depending on the mode selected. This
button will toggle between low and fast speed.
2-25
j (Pause): Touch this screen button to pause the
route preview.
From this screen, you can add a waypoint or POI to the
current route.
T/| (Scroll to Destination): Touch this screen
button to scroll to the destination, next waypoint or next
POI depending on the mode selected. This button
will toggle between low and fast speed.
t (Skip to Destination): Touch this screen button to
skip to the destination, next waypoint or next POI
depending on the mode selected.
Choose Edit to edit the route and access the following
screen:
If you chose to calculate your route, this screen will be
displayed. From this map screen, you can touch
Guide to begin route guidance, or Chg. route to return
to the ROUTE OPTIONS screen.
2-26
Three Routes
To access this screen, touch the Chg. Route button on
the map screen while planning a destination.
Touch Info on the three routes screen to access the
INFO FOR 3 ROUTES screen. From this screen,
you can view the following information for the different
planned routes:
When applicable, the system will calculate up to three
different versions of your current route in three different
colors: Quick, Normal, and Short. The routes are
shown with distance to destination and estimated travel
time. The quickest route may not be the shortest,
and vice versa. When an optional route is selected it is
shown on the map in another color.
G (Estimated Travel Time):
This icon shows the
route’s estimated time of travel.
J (Straight-Line Distance):
This icon shows the
route’s straight-line distance to destination.
2-27
W (Toll Road): This icon shows the route’s toll road
distance information.
c (Freeway Travel):
This icon shows the route’s
freeway distance information.
b (Ferry):
This icon shows the route’s ferry distance
Stored Locations
Memory Points
Choosing Memory Points from the Nav. Menu will take
you to the STORED LOCATIONS screen. From this
screen, you can access the following options:
information.
{ (Time-Restricted Roads):
This icon shows the
route’s time-restricted road information.
NMemory Points:
This feature allows you the ability to
store memory points. You can store them in the four
different categories listed, Personal, Business,
Entertainment, and Marked Point. Once in a
folder/category you can store a point (Add), edit a point,
delete a point, delete all points, or edit a category
name. You can store up to 60 memory points per driver
in each folder.
2-28
This feature will allow you to make changes to a specific
stored point, such as changing the name, moving it to a
different folder/category, storing the point as a name tag,
modifying the position of the stored point, changing the
icon and changing the phone number.
To edit a the name of a stored point:
1. Select one of the folders/categories listed.
To store a point:
1. Select one of the folders/categories listed.
2. Select Add.
3. Select the desired method of entering a destination
to enter the memory point. See Enter Destination
for more information. A map screen will appear
displaying the selected memory point location.
4. If available, touch the INFO button to view the
address information of the selected point.
2. Select the memory point that you wish to edit.
5. Touch OK to store the point as a memory point.
2-29
To move the memory point from one folder/category to
another:
1. Select one of the folders/categories listed.
2. Select the memory point that you wish to edit.
3. Touch the Category screen button from the EDIT
MEMORY POINT screen.
4. Touch the new folder/category button you want to
move the memory point to.
5. The Navigation System will display a message
confirming your move.
To store the point as a name tag:
1. Select one of the folders/categories listed.
3. Touch the Name screen button from the EDIT
MEMORY POINT screen.
4. Use the backspace screen button to delete the
current name or use the alpha keypad to make
changes.
5. Touch the OK screen button to store the change.
2. Select the memory point that you wish to edit.
3. Touch the Add Nametag screen button from the
EDIT MEMORY POINT screen.
4. The Navigation System will say “Name please.” State
what you would like to call the memory point.
If the name is short, wait a few seconds after the
system asks you to state the name.
5. The Navigation System will play back what was
recorded and then will ask you to confirm your
nametag. State “Yes“ if you want to confirm
the nametag. Stating “No” will cancel the nametag
and you can try again.
2-30
Once a nametag is stored, you can choose to whether
to have the name show. You can also select the
Del Nametag screen button to delete the nametag.
4. Select the desired icon. There are two pages of
icons, a page of icons that have sounds associated
with them, and a no icon button to choose from.
To modify the position of the stored point:
5. The new icon will be displayed in the EDIT MEMORY
POINT screen, next to the Icon screen button.
1. Select one of the folders/categories listed.
2. Select the memory point that you wish to edit.
To change the phone number of a memory point:
3. Touch the Position screen button from the EDIT
MEMORY POINT screen.
1. Select one of the folders/categories listed.
4. The Navigation System will display the map screen
with the destination marked. Touch the map to
move the position of the memory point.
3. Touch the Tel. screen button from the EDIT
MEMORY POINT screen.
5. Touch OK when you have moved the memory point
to the appropriate location.
6. The Navigation System will return to the EDIT
MEMORY POINT screen and will now display
the new address, longitude and latitude for
the changed memory point.
To change the icon associated with a memory point:
1. Select one of the folders/categories listed.
2. Select the memory point that you wish to edit.
3. Touch the Icon screen button from the EDIT
MEMORY POINT screen.
2. Select the memory point that you wish to edit.
4. Use the numeric keypad to change the phone
number.
5. Touch OK to store the changed phone number.
To delete a memory point:
1. Select one of the folders/categories listed in the
MEMORY POINTS screen.
2. Select the Delete screen button.
3. Select the memory point that you wish to delete
from the DELETE POINT screen. You can use
the sort feature to sort by distance, icon, name or
date as needed.
2-31
To change the name of the folder/category:
1. Select the desired folder/category from the
MEMORY POINTS screen.
2. Select the Edit Category screen button.
4. The Navigation System will show the map screen
with the position address and a pop-up confirmation
message. Select Yes to delete the point; select
No to return to the DELETE POINTS screen and not
delete the point.
To delete all of the memory points in a folder/category:
1. Select the desired folder/category from the
MEMORY POINTS screen.
2. Select the Del.All screen button.
3. The Navigation System will display a pop-up
confirmation message. Select Yes to delete all the
points in the folder/category; select No to cancel the
operation.
2-32
3. Use the alpha keypad to change the name of the
folder/category as desired.
4. Touch the OK screen button to save your changes.
3 Avoid Area:
This feature allows you to store or
delete an area to be avoided while planning a route. You
can have up to 10 points stored.
To change the name of the point to be avoided:
1. Touch the Avoid Area screen button from the
MEMORY POINTS screen.
2. Touch the Edit screen button from the AVOID
AREA screen.
3. Select the point to be changed.
To store a point to be avoided while planning a route:
1. Touch Avoid Area from the MEMORY POINTS
screen.
2. Touch Add from the AVOID AREA screen.
3. Select the desired method of entering a destination
to enter the area to be avoided. See Enter
Destination for more information. A map screen will
appear displaying the selected location.
4. If desired, reduce or enlarge the area around the
point you want to avoid by using the reduce or
enlarge keys.
4. Touch the Name screen button.
5. Use the alpha keypad to add to or change the name.
5. Touch OK to store the area.
2-33
6. Touch the OK screen button to save your changes.
7. Select the Show Name On screen button if you
would like the name of the point to appear on the
map screen.
To change the position of the point to be avoided:
To delete a point to be avoided:
1. Touch the Avoid Area screen button from the
MEMORY POINTS screen.
2. Touch the Delete screen button from the AVOID
AREA screen.
1. Touch the Avoid Area screen button from the
MEMORY POINTS screen.
3. Select the point you want to delete. Use the
scrolling arrows as needed.
2. Touch the Edit screen button from the AVOID
AREA screen.
4. The Navigation System will display the map screen
with the name of the point and a pop-up
confirmation message. Touch Yes to have the point
deleted; touch No to cancel the function.
3. Select the point to be changed.
4. Touch the Position screen button.
5. Touch the map to move the location.
6. If desired, reduce or enlarge the area around the
point you want to avoid by using the reduce or
enlarge keys.
7. Touch OK to store the area.
2-34
To delete all of the points to be avoided:
1. Touch the Avoid Area screen button from the
MEMORY POINTS screen.
2. Touch the Del.All screen button.
3. The Navigation System will display a pop-up
confirmation message. Touch Yes to have all of the
points deleted; touch No to cancel the function
and return to the AVOID AREA screen.
$ Dest. & Way Pt.: This feature allows you to store
up to five waypoints to the current route.
4. A map screen will appear with the way point marked.
5. Select the o (Way point) symbol on the map
screen to save the way point.
6. Repeat Steps 2 - 6 to add up to five way points to
your route. For the second through the fifth way
points added, the Navigation System will display the
ADD WAYPOINT screen.
From this screen you can add, edit, or delete waypoints
to your route.
To add a waypoint:
1. Touch the Dest. & Way Point screen button from
the MEMORY POINTS screen.
2. Touch the Add screen button from the DEST. &
WAY POINT screen.
3. Using the desired method of entering a destination,
enter the way point. See Enter Destination for more
information.
7. Select the desired location/order that you want your
newly added waypoint to fall in your route by
touching the corresponding Add screen button. The
Add and arrow screen buttons are located to
show where the new way point is placed.
2-35
To change the order of the route:
To change the location of a way point:
1. Touch the Dest. & Way Point screen button from
the MEMORY POINTS screen.
1. Touch the Dest. & Way Point screen button from
the MEMORY POINTS screen.
2. Touch the Edit screen button from the DEST. &
WAY POINT screen.
2. Touch the Edit screen button from the DEST. &
WAY POINT screen.
3. From the CHANGE ORDER screen, select on the
addresses in the order you would like them to fall
on the route.
3. Touch the Chg. Loc. screen button from the
CHANGE ORDER screen.
4. From the CHANGE LOCATION screen select the
point whose location needs to change.
5. A map screen will be displayed with the destination
marked. Touch on the map to move the location of
the waypoint.
6. Touch the OK screen button to save your changes.
The Navigation System will return to the STORED
LOCATIONS screen.
To delete a way point from your current route:
1. Touch the Dest. & Way Point screen button from
the MEMORY POINTS screen.
2. Touch the Delete screen button from the DEST. &
WAY POINT screen.
3. Select the way point/destination you want to delete.
4. Select OK to save your changes.
2-36
4. The Navigation System will display the map
screen with a pop-up confirmation message.
Choose Yes to delete the way point; touch No to
cancel this operation.
To delete all of the way points on your route:
1. Touch the Dest. & Way Point screen button from
the MEMORY POINTS screen.
2. Touch the Del.All screen button from the DEST. &
WAY POINT screen.
3. The Navigation System will display the map screen
with a pop-up confirmation message. Choose Yes
to delete all of the way points; touch No to
cancel this operation.
LHome:
This feature allows you to store/delete/edit a
point to be stored as your home destination.
Storing a Home Destination
This function allows you to set a destination and store it
as home.
Touch this L (Home) screen button to access the
HOME screen.
To store your home destination, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Choose Memory Points.
3. Choose Home.
4. Choose Add to add a the destination.
5. Choose a destination entry method. See Enter
Destination for more information.
6. Touch OK on the map screen and the destination
will be stored. The home icon will now be
highlighted on the DESTINATION ENTRY screen.
2-37
To edit your home destination, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Choose the Memory Points screen button.
3. Choose the Home screen button.
4. Choose Edit from the HOME screen to change
the location.
5. Touch the map to move the location of the point.
6. Touch OK to save your changes.
To delete your home point, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Choose Memory Points.
3. Choose Home.
4. Choose Delete from the HOME screen.
5. The Navigation System will display the map screen
with a pop-up confirmation message. Select Yes to
delete the home position previously stored;
select No to cancel the operation.
& Previous Dest.: This feature allows you to delete
one or all previous destinations.
To delete a specific destination from your previous
destinations list, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Choose the Memory Points screen button.
3. Touch the Previous Dest. screen button.
4. Touch the Delete screen button.
5. Select a destination from the list displayed.
6. The Navigation System will display the map screen
with a pop-up confirmation message. Select Yes to
delete the destination previously stored; select
No to cancel the operation.
To delete all destinations from your previous
destinations list, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Choose the Memory Points screen button.
3. Touch the Previous Dest. screen button.
4. Touch the Del.All screen button.
5. The Navigation System will display the map screen
with a pop-up confirmation message. Select Yes to
delete all of the destinations previously stored;
select No to cancel the operation.
APreset Dests.: This feature allows you to add,
delete or change one of five preset destinations.
2-38
Storing a Preset Destination
To store a preset destination, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Press the Memory Points screen button.
3. Choose the Preset Dests. screen button.
4. Choose the Add screen button to add a preset
destination, then choose the numbered preset
icon you would like it to appear as.
5. Choose a destination entry method from the
STORE PRESET DEST screen.
6. Set the destination. See for more information.
7. Touch OK on the map screen and the destination
will be stored. It will now be highlighted on the
DESTINATION ENTRY screen.
To edit the name of a preset destination, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Press the Memory Points screen button.
3. Choose the Preset Dests. screen button.
4. Choose the Edit screen button from the PRESET
DESTS. screen.
5. Select the preset destination whose name you want
to edit.
6. Touch the Name screen button and use the alpha
keypad to edit or add the name.
7. Touch the OK screen button to save your changes.
The new name will then be displayed.
2-39
To change the position of a preset destination, do the
following:
To add or change the phone number of a preset
destination, do the following:
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
1. From a map screen, touch the Menu screen button.
The NAV. (Navigation) MENU will be displayed.
2. Press the Memory Points screen button.
2. Press the Memory Points screen button.
3. Choose the Preset Dests. screen button.
3. Choose the Preset Dests. screen button.
4. Choose the Edit screen button from the PRESET
DESTS. screen.
4. Choose the Edit screen button from the PRESET
DESTS. screen.
5. Select the preset destination whose position you
want to change.
5. Select the preset destination whose phone number
you want to change.
6. Touch on the map to move the location/position
point on the map.
6. Touch the Tel. screen button and use the numeric
keypad to input or change the phone number.
7. Touch the OK screen button to save your changes.
7. Touch the OK screen button to save your changes.
Display Memory Pt. Icons: Touch this screen
button to display memory point icons on the map screen.
When highlighted, the feature is on. When dark, the
feature is off.
Calculate: Touch Calculate to calculate your route.
2-40
Maps
This section includes basic information that you need to
know about the map database.
Regional Maps
The maps are stored on a DVD. The 48 contiguous
United States and portions of Canada are contained on
one disc.
If a regional map does not contain a specific city, the map
DVD may not contain the city or it may be misspelled.
Refer to the Navigation System Map Disc manual to view
a detailed explanation of map coverage and detailed city
lists in each region. This manual will be in your map DVD
case when the vehicle is delivered from the factory.
Installing the Map DVD
When your vehicle is delivered from the factory, the
dealer may have installed the map DVD. If the map DVD
was not installed in your vehicle when first purchased,
use the following directions to load the map DVD:
Once the map DVD is inserted correctly, you will have
the following two choices:
Agree: Touch this screen button to proceed to the
navigation system.
^ (Language):
Touch this screen button to change
the language of the navigation system. See “Language”
under Personalization on page 5-2 for more information.
Once a language has been selected, touch Agree to
enter the navigation system. The map will appear
showing your current vehicle position.
Setting the Search Area
See Enter Destination on page 2-6 for information on
changing the search area.
Map Adjustments
The system allows you to adjust the scale of view on
the map. Also, as you drive, the map will scroll
automatically based on the direction you are traveling.
Read the following steps completely before operating
this feature.
1. Turn the ignition on.
2. Load the map DVD into the slot located just below
the navigation system screen by inserting it partially
until the system pulls it in.
2-41
Map Scales
To view a larger or smaller
scale of the map, touch
the map scale arrows.
You can change the level of map detail by either zooming
in or zooming out using the arrow screen buttons or by
touching the scale on the bar. The system will adjust the
map accordingly. The scale of a map can range from
1/32 of a mile (0.05 km) to 128 miles (256 km).
Scrolling the Map
Touch anywhere on the
map screen twice and the
scroll symbol will appear.
Use this feature to
scroll across the map.
You can hold your finger in any direction outside of the
scroll symbol and the map will continue to scroll in that
direction until you remove your finger from the map
screen.
2-42
If scrolling while your vehicle is in PARK (P), the system
will scroll initially at a slower rate. It will increase if
you continue touching the map screen.
If scrolling while your vehicle is in motion, you have one
scroll speed and a limited distance to scroll. You
have to keep touching the map screen to scroll for a
longer distance.
If you have used the scroll feature to scroll the map and
your vehicle icon becomes lost, press the map hard
key to return to the current vehicle location on the map.
When scrolling on the map without a planned route,
the system will display the route from your current
position to the destination mark.
You can use the scroll feature on the map to set a
destination. See “Map” under Enter Destination
on page 2-6 for more information.
Symbols
The following symbols are the most common symbols
that will appear on a map screen.
I (Current Position):
Your vehicle is shown as this
symbol. It indicates the current position and heading
direction of your vehicle on the map.
The destination symbol will
appear on the map after a
route has been planned
marking your final
destination.
The waypoint symbol will
be displayed on the map
after a waypoint has been
added to your route.
The distance to destination
symbol indicates the
distance to your final
destination. It only appears
when time is not available
or when you are scrolling
on the map without a
route planned.
The distance and time to
destination symbol
indicates the distance and
the estimated time
remaining to your final
destination or arrival time,
depending on the option
selected. See Configure
Menu on page 2-49
for more information.
The waypoint symbol will be numbered from one through
five depending on how many waypoints have been set.
2-43
The straight line to
distance symbol shows the
straight-line distance to
your destination.
This symbol will appear before you start driving on the
route or if you are on a road where navigation
guidance cannot be given.
The north up symbol
indicates the map with
North Up, known as North
Up mode.
While in North Up mode, the vehicle icon will follow the
north direction on the map regardless of which direction
the vehicle is traveling. Touch this screen symbol to
switch between North Up and Heading Up modes.
2-44
The heading up symbol
indicates the map with the
vehicle travel direction
up, known as Heading
Up mode.
The shaded triangle indicates the North direction. While
in Heading Up mode, the direction your vehicle is
traveling will always be at the top of the map screen.
The vehicle icon will always be headed in the direction
your vehicle is traveling. Touch this screen symbol
to switch between Heading Up and North Up modes.
y (No GPS): This symbol will appear in the upper right
corner of the map screen, under the heading direction
symbol, when your vehicle is not receiving a Global
Positioning System (GPS) satellite signal. See Global
Positioning System (GPS) on page 2-59 for more
information.
When a name is too long to
be displayed, an arrow
symbol will appear. Touch
the right or left arrow
screen button to scroll
through the entire name.
This symbol indicates the
position of the next
guidance maneuver.
Q (Dual View):
Touch this symbol to change the
guidance window to dual map mode when under Route
Guidance. This mode will show two map screens
and each can have a different scale level and different
POIs. Touch the map to change the heading direction,
scale and to add or delete POIs.
The following symbols can also be found on a map
screen:
Touch this symbol to
display the scale on the
map, allowing you to zoom
in and out.
O (Guidance Window Appearance on Map):
Touch
this symbol to change the guidance window appearance.
You can select from one of the following options.
Availability of these options depends on the route.
P (Map Appearance):
Touch this symbol to show the
R (Turn List):
Touch this symbol to change the
guidance window to display turn list guidance on the
map screen when under Route Guidance. This
mode displays several maneuvers at a time.
map screen.
2-45
S (Next Turn): Touch this symbol to change guidance
mode to display mode guidance on the map screen when
under Route Guidance. This mode allows you to see
more of the map screen and displays a small guidance
window with the direction and distance of the upcoming
maneuver.
h (Destination):
T (Next Maneuver):
Touch this symbol to display
only the next maneuver along with a small map of the
maneuver.
N (Memory Point):
c (Highway Guidance): Touch this symbol to display
highway guidance on the map screen. The Navigation
System will go into this mode any time you have a route
on a freeway, unless you change it manually. When in
this mode, the Navigation System provides the upcoming
exit number, distance to the exit, and available POIs at
the exit. You can use the up and down arrows to scroll
through the list displayed. Select an exit to view available
POIs and select the map button to go to that location on
the map.
W (Back): Touch this screen button to return to
the previous page.
2-46
Touch this symbol to set the current
route as the final destination.
o (Waypoint):
Touch this symbol to enter a waypoint
along the current route. This allows you to have
more than one destination planned at a time.
Touch this symbol to store the
location on the screen as a memory point. The memory
point will be stored in the Marked Point folder/category.
F (Cancel):
This screen button will return you to the
Navigation menu.
Auto Reroute
Keyless Access System
When your destination is set and you are off the
planned route, the system will automatically plan a new
route and begin to reroute. You will be able to see
the new route highlighted on the screen.
When you start your vehicle, you will see Driver 1 or
Driver 2 displayed on the cluster. If personalization
is turned off in feature programming, a message will not
appear on the cluster. The number on the back of
the RKE transmitter corresponds to driver 1 or driver 2.
The navigation system can store memory points for
driver 1 and 2 individually. See Personalization
on page 5-2 for more information.
Traveling Across Regions
If you plan to drive across many states, you may have
to change the region selected to represent the area
you are traveling to. To do so, do one of the following:
1. Change the selected region in the search area
when you get closer to the area you are traveling
to. See Enter Destination on page 2-6 or,
2. Change the selected region in the search are when
entering your destination and route settings. See
Enter Destination on page 2-6.
For example, if you were traveling from Michigan to
Florida, change the region currently selected in
the search area to Florida. Enter a destination in
Florida under the DESTINATION ENTRY menu.
2-47
OnStar® System
V (Place/End Call):
Touch this screen button to place
your phone call. While in a call this button will be red
and can then be used to end your call.
Tone Send: Touch this screen button send touch tone
data. This button will become available during a
phone call. This function is used when you need to
enter numbers in response to an automated phone
request, such as when check your voice mail or
are asked to choose menu items.
Incoming Call: When receiving an incoming call, a
pop-up message will be shown on the screen with two
place/end call screen buttons, one green and the
other red. Touch the green button to answer the call.
Touch the red button to reject the call.
With an active OnStar® subscription with personal calling,
you can make telephone calls from your vehicle, using
the Navigation System screen to enter the numbers.
Q(OnStar):
Touch this screen button to access the
OnStar® phone screen. Touch the AUX hard key
to access this button. This screen is not available
while driving.
2-48
When using the OnStar® system, the audio system will
be muted. The volume of an OnStar® call can be
adjusted by using the steering wheel controls or the
volume knob on the Navigation System. See “OnStar®
System” in the index of your vehicle’s owner manual
for more information.
Using the OnStar® Screen to Make a
Phone Call
Configure Menu
To make a phone call using the OnStar® screen do the
following:
1. Press the AUX hard key.
2. Touch the OnStar® screen button.
3. Enter the phone number using the numeric keypad.
4. Touch the place/end call screen button to place
the phone call.
5. If you need to use the tone send button for checking
voice mail or responding to an automated request,
enter the appropriate number(s) using the keypad
and then touch the tone send button. Once that set
of numbers has been sent, the tone send button
will be dimmed until another set of numbers is input
on the keypad.
6. To end the call, touch the place/end call screen
button. It will be red while you are on the call.
Press the CONFIG hard key to access this menu,
allowing you to adjust several of your system’s features
and preferences.
2-49
Bluetooth®
E (Bluetooth®): Touch this screen button to access the
Bluetooth® setup screen. See Bluetooth® Phone on
page 6-2 for more information on the Bluetooth® system.
Audio
Touch the Audio screen button to access a screen
where several audio features may be turned on and off
and several options are available for adjustment.
The screen buttons next to each option will be
highlighted if chosen to be on. The items on this menu
will depend on which audio source is selected.
Auto Store: Touch this button to turn the Auto Store on
for the current audio source selected. When on, this
button will appear on the main audio screen. This button
is not available when in XM™ audio mode.
Info (Information): This information will change
depending on what audio source is selected. This button
is available when you are using the FM or XM™ audio
modes. Touch this button to turn the Info function on.
When on, the button will be available to select from the
audio main menu.
Category: This information will change depending on
what audio source is selected. This button is only
available when you are using the FM or XM™ audio
modes. Touch this button to turn the Category function
on. When on, the button will be available to select
from the audio main menu.
Traffic: This button is only available when you are
using the FM or CD/DVD audio modes. When on, the
Navigation System will search for stations that broadcast
traffic announcements. See Navigation Audio System
on page 3-2 for more information.
2-50
Subtitle Language: Select this button to view a list of
languages to choose for subtitles. The list of languages
will depend on the languages supported by the
inserted disc. Select the language desired.
Menu Language: Select this button to view a list of
languages to choose for the DVD menu text. The list of
languages will depend on the languages supported
by the inserted DVD.
When in CD/MP3 mode select this on if you want to use
these functions while listening to a CD/MP3 disc.
Parental Level: Select this button if you choose to set
up parental protection. Use the keypad to enter the
password. Select from options such as change level and
change password, as necessary.
Audio Language: Select this button to view a list of
language choices. Select the desired language. The list
of languages will depend on the languages supported
by the inserted disc. This button will allow you to change
the language spoken.
2-51
Navigation Set Up
From this menu, several options are available for
adjustment:
3(Navigation Set Up): Touch this screen button to
access the NAVIGATION SET UP screen.
8 2D/3D View:
2-52
This option allows you to change
the view of the map screen and the guidance screen
between a 2-dimensional and 3-dimensional view. When
changing the map to the 3-dimensional view, use the
up/down arrows to change the angle of the map. Select
Default to return to the factory settings.
C Quick POI Selection: This option allows you to
set six Point of Interest (POI) categories that you
can select from while driving. To select from these
categories while driving, touch anywhere on the map or
press the POI screen button on the map screen.
3. Select a Quick POI category from the Quick POI
selection menu list.
4. Pick the subcategory from the list that appears.
To set the Quick POI selection, do the following:
1. Touch the Quick POI Selection screen key.
2. Select the category you would like to replace.
5. The system automatically returns to the Quick POI
Selection screen. Your category changes are
now saved.
6. To change back to the system generated choices,
touch the Default screen key.
2-53
To remove the POI icons from the map screen, do the
following:
1. Touch the Quick POI Selection screen key.
2. Touch the POI Off screen key. The current POI
icons will be removed from the map screen.
5 Calibration:
This option allows you to recalibrate
the navigation system.
To correct the position of your vehicle on the map (if
your vehicle has been shipped, for example) or to
change to the current position, touch the
Position/Direction screen key.
If there are tire pressure differences or a spare tire is
installed, the Navigation System will automatically
re-calibrate the system but it may take longer. To
calibrate the vehicle speed signal, touch the Distance
screen key.
J User Settings: This option allows you to turn on
and off several other route guidance setting options.
Once you enter the Calibration screen, you have the
choice to either adjust your vehicle’s position or to adjust
the vehicle speed signal.
2-54
From this screen, you can adjust the following:
Notify traffic restriction: This option instructs the
system to notify you when the current route has traffic
restrictions.
Arrival Time G (Time of Arrival): This option will
display the estimated time of arrival to your destination.
Arrival Time \ (Time to Destination): This option will
display how much time remains to reach your destination.
Guidance Screen: This option will turn the guidance
screen on and off.
Freeway Information: This option will display freeway
information in the guidance window while on a route.
Text size on map: This option allows you to adjust the
text size on the map between Large, Medium, and
Small. This option is located on the second page of the
USER SETTINGS screen. Touch the down arrow to
access this option.
DRestore System Defaults: Select this option from
the NAVIGATION SET UP screen to change all
adjustable system settings to factory defaults.
Average Speed: Select this option to set the average
speed to default.
2-55
Vehicle
Vehicle: Touch this screen button to access the vehicle
information menu. From this menu, you can adjust
such options as the language, personal settings, and
memory options. See Personalization on page 5-2
for more information on these features.
> Volume: This option allows you to adjust the
volume of voice guidance prompts and the voice
recognition system. You may also choose to turn voice
guidance prompts off.
2-56
Clock
H (Clock Adjust):
Touch this screen button to access
the Clock Adjust screen and adjust several time features.
AM: Touch this screen button when setting the
time in AM.
PM: Touch this screen button when setting the
time in PM.
PST, MST, CST, EST: Touch one of these screen
buttons to choose between Pacific Standard Time (PST),
Mountain Standard Time (MST), Central Standard
Time (CST), and Eastern Standard Time (EST).
GPS TIME: Touch this screen button to match the
navigation system’s time to GPS time.
Daylight Savings: Touch this screen button to increase
the time by one hour. Touch this screen button again to
turn this feature off and decrease the time by one hour.
y/z: Touch the up arrow to increase the hour or
minutes. Touch the down arrow to decrease the hour
or minutes.
From this screen, you can adjust the following:
12Hour: Touch this screen button to display the time in
standard AM/PM format.
24Hour: Touch this screen button to display the time in
military format.
2-57
Screen Appearance
z (Screen Appearance):
Touch this screen button to
access the appearance screen menu.
Color Mode: This option allows you to adjust your
screen mode between Auto, Day, and Night. Day mode
will change the navigation system screen to a lighter
background for better viewing in the daytime. Night
mode will change the navigation system screen
to a darker background for better viewing at night. Auto
mode will adjust the screen automatically depending
on exterior lighting conditions.
_ (Contrast):
This feature allows the adjustment of
contrast of the navigation screen. Touch the plus (+) or
minus (−) signs on either side of the contrast bar
graph to increase or decrease the contrast.
] (Brightness): This feature allows the adjustment of
brightness of the navigation screen. Touch the plus (+) or
minus (−) signs on either side of the brightness bar graph
to increase or decrease the brightness.
From this menu, several options may be adjusted:
Color Scheme: This option allows you to choose
between three different screen color schemes by
touching 1 (blue), 2 (green), or 3 (brown).
2-58
Screen OFF: This feature allows you to turn the
navigation screen off. Touch any hard key to turn the
screen back on.
Global Positioning System (GPS)
The Navigation System determines the position of your
vehicle by using satellite signals, various vehicle
signals and map data.
At times, other interferences such as the satellite
condition, road configuration, the condition of the vehicle
and/or other circumstances can interfere with the
Navigation’s ability to determine the accurate position of
the vehicle.
The GPS shows the accurate current position of your
vehicle using signals sent by the GPS Satellites of
the United States Department of Defense. When your
vehicle is not receiving signals from the satellites,
a symbol will appear on the map screen. Refer to
Symbols on page 2-43.
This system may not be available/or interference may
occur if the following happens:
• Signal obstructions caused by tall buildings, large
trucks, tunnels,
• objects located on top of the instrument panel,
• satellites will not send signals if they are being
repaired or improved,
• after-market glass tinting has been applied to the
vehicle’s windows.
Notice: Do not apply after-market glass tinting to
the vehicle’s windows. Glass tinting will interfere
with the system’s ability to receive GPS signals and
cause the system to malfunction. You might have
to replace the window to correct the problem.
This would not be covered by your warranty.
For more information if you are experiencing a problem,
see If the System Needs Service on page 2-62 and
Problems with Route Guidance on page 2-61.
2-59
Vehicle Positioning
• The vehicle is entering and/or exiting a parking lot,
garage or a lot with a roof.
At times, the position of the vehicle on the map may be
inaccurate due to one or more of the following reasons:
• The road system has changed.
• The vehicle is driving on slippery road surfaces such
as in sand, gravel and/or snow.
• The vehicle is traveling on winding roads.
• The vehicle is on a long straight road.
• The vehicle is approaching a tall building or a
large vehicle.
• The surface streets run parallel to a freeway.
• The vehicle has just been transferred by a vehicle
carrier or a ferry.
• The current position calibration is set incorrectly.
• The vehicle is traveling at high speed.
• The vehicle changes directions more than once, or
when the vehicle is turning on a turn table in a
parking lot.
2-60
•
•
•
•
•
•
•
•
•
The GPS signal is not received.
A roof carrier is installed on your vehicle.
The vehicle is equipped with tire chains.
The tires are replaced.
The tire pressure for your tires is incorrect.
The tires are worn.
The first time the map DVD is inserted.
The battery is disconnected for several days.
The vehicle is driving in heavy traffic where driving is
at low speeds, and the vehicle is stopped and started
repeatedly.
If you experience problems with your system, you may
need to calibrate the system. This may be due to tire
pressure differences, or if a spare tire is installed. To
calibrate the system, see Configure Menu on page 2-49.
Problems with Route Guidance
Inappropriate route guidance may occur under one or
more of the following conditions:
• You have not turned onto the road indicated.
• Route guidance may not be available when using
automatic rerouting for the next right or left turn.
• The route may not be changed when using
automatic rerouting.
• There is no route guidance when turning at an
intersection.
• Plural names of places may be announced
occasionally.
• Automatic rerouting may display a route returning to
the set waypoint if you are heading for a destination
without passing through a set waypoint.
• The route prohibits the entry of a vehicle due to a
regulation by time or season or any other regulation
which may be given.
• Some routes may not be searched.
• The route to the destination may not be shown if
there are new roads, if roads have recently
changed or if certain roads are not listed on the
map DVD. See Ordering Map DVDs on page 2-62.
To recalibrate the vehicle’s position on the map, see
Configure Menu on page 2-49.
• It may take a long time to operate automatic
rerouting during high-speed driving.
2-61
If the System Needs Service
Database Coverage Explanations
If your system needs service and you have followed the
steps listed here and still are experiencing problems,
see your dealer for assistance. For more information
on calibrating the system, see Configure Menu on
page 2-49.
The United States, excluding Alaska and Hawaii, and
portions of Canada are contained on one DVD disc. The
map database contains three different levels of
coverage: detailed areas, non-detailed areas and limited
guidance areas. Detailed areas are available for the
United States and Canada and are primarily located
around metropolitan areas. Limited guidance areas are
only available for the United States. The roads are
displayed on the map, but route and voice guidance is
not available. Non-detailed areas are available for
Canada only. Major roads are included depending upon
available coverage.
Ordering Map DVDs
The map DVD in your vehicle is the most up-to-date
information available when your vehicle was purchased.
The map DVD is updated once a year, provided that
the map information has changed. To order a new map
DVD, contact your dealer.
2-62
For more detailed information on database coverage,
see the Navigation System Map Disc manual included
inside the map DVD case.
Section 3
Navigation Audio System
Navigation Audio System ..................................3-2
Six-Disc CD/DVD Changer .............................3-12
Radio Personalization ....................................3-23
3-1
Navigation Audio System
Playing the Radio
Notice: Before adding any sound equipment to
your vehicle, like a tape player, CB radio, mobile
telephone, or two-way radio, make sure that it can
be added by checking with your dealer. Also,
check federal rules covering mobile radio and
telephone units. If sound equipment can be added,
it is very important to do it properly. Added
sound equipment may interfere with the operation
of your vehicle’s engine, radio, or other systems,
and even damage them. Your vehicle’s systems may
interfere with the operation of sound equipment
that has been added improperly.
On (Power/Volume):
Your vehicle has a feature called Retained Accessory
Power (RAP). With RAP, the audio system can be
played even after the ignition is turned off. See
“Retained Accessory Power (RAP)” in your vehicle’s
owner manual for more information.
The audio system is operated using navigation system
menus. The audio menus are explained in this section.
Press this knob to turn the
audio system on and off. Turn the knob to the right
to increase or to the left to decrease the volume to the
audio system.
BAND: Press this key to switch between AM, FM, XM,
if equipped, or WX, if equipped. If you are on a map
screen and press this key, the menu will not change, but
the audio source will.
SRCE (Source): Press this key to change the audio
source from the radio band to CD, audio DVD, or video
DVD, depending on what is loaded in the six-disc
DVD changer, or from DVD/CD to radio mode.
e (Audio):
Press this key to view the AUDIO ADJUST
screen. See “Audio Adjust” screen later in this section.
ǻ(Seek/Scan): Press the up or down arrow to go to
the next or previous station and stay there, or press
and hold for less than 2 seconds to go into scan mode.
To stop scanning, press either arrow again or touch
the scan button on the screen.
Tuning Knob: Turn this knob to go to the next or
previous station and stay there.
3-2
Finding a Station
To scan preset stations, touch and hold Scan for two
seconds. Touch Scan again to stop scanning. While in
A.B.C mode, the system will change bands and
screens to the current band.
If available on your vehicle, you can also use the
1 - 6 (preset seek) steering wheel control to seek
through your preset stations.
Info (Information): Touch Info to display information
broadcasted by the RDS station when in FM mode
or XM™ radio station you are listening to. See “Radio
Data System (RDS)” or “XM™ Satellite Radio Service”
later in this section.
FM source shown, other sources similar
Press the BAND hard key to toggle between AM, FM,
XM, if equipped, or WX, if equipped. Or, touch the
desired audio source to select it. To search for a station
use the tune, seek, or Scan button.
Category: Touch this button when in FM mode to have
the program types appear on the preset. Select a
category and the system will start scanning for available
stations within the selected category. If none are
found the system will display “None Found” and will
return to the last selected station. Each of the six
category names displayed on the presets include a
grouping of other program types. In AM and WX modes,
the Category option is not available.
SCAN: To scan stations, touch the Scan screen button.
The radio will go to a station, play for a few seconds,
then go on to the next station. Touch Scan again to stop
scanning.
3-3
3. Tune in the desired station by using the
SEEK/SCAN hard key.
A.B.C: This button allows you to scroll through the
7 preset lists. The list names are A - G. Each list can
store 6 presets. The presets within each list can be
mixed, AM, FM, or XM, if equipped. Press the left/right
arrow buttons to scroll through the list. The name of the
list is displayed between the two arrows and the presets
for each list are displayed on the preset buttons. To exit
this mode, press the A.B.C screen button.
A.B.C Preset Mode
[ ] (No Traffic Announcements): This symbol will
appear on the status line when traffic is selected, but the
station does not broadcast traffic announcements.
This feature allows you to store up to 42 presets, six
each in seven different preset lists. These presets are in
addition to any dedicated presets that may be stored.
To store the A.B.C presets, do the following:
[TA] (Traffic Announcements): This symbol will
appear on the status line when the station selected
broadcasts traffic announcements. TA announcements
will depend on the station.
Preset Station Menu
Storing Dedicated Presets
This feature allows you to store up to 24 dedicated
presets. In this mode, you can only store six AM, six FM,
six XM (if equipped) and six WX (if equipped). To
store presets, do the following:
1. Turn the audio system on.
2. Touch the desired audio source for the station you
wish to set.
3-4
4. Touch and hold one of the six preset buttons for
more than two seconds or until you hear a beep.
5. Repeat the steps for each preset desired.
1. Select the A.B.C screen button.
2. Scroll to the desired list (A - G).
3. Touch the desired audio source (AM, FM, XM, if
equipped, or WX, if equipped) for the station you
wish to set.
4. Use the tune knob or seek up/down hard key
buttons to tune in the station you wish to set.
5. Press and hold the desired preset number until you
hear a beep.
6. Repeat the above process for each preset and list.
Audio Adjust
e(Audio Adjust):
Touch this hard key to access the
AUDIO ADJUST menu and to adjust the tone, Digital
Signal Processing (DSP), fade, and balance for all
sources.
Mid (Mid-range): Touch the plus (+) or minus (−) sign
next to this symbol to increase or decrease the
mid-range. Touch the center position to adjust the
setting to the center.
D (Bass):
Touch the plus (+) or minus (−) sign next to
this symbol to increase or decrease the bass. Touch
the center position to adjust the setting to the center.
Z (Speaker):
Touch the plus (+) or minus (−) sign next
to this symbol to increase or decrease the speaker
when in surround mode or Center Point DSP setting is
selected. This feature allows you to increase or
decrease the amount of surround sound. Touch the
center position to adjust the setting to the center.
To adjust the balance or fade, do the following:
1. Touch Left or Right to adjust the balance of the
speakers. Touch the center position to adjust the
setting to the center.
To adjust the DSP, see “Adjusting the Speakers”
following in this section. To adjust the tone settings, do
the following:
2. Touch Front or Rear to adjust the fade of the
speakers. Touch the center position to adjust
the setting to the center.
P(Treble):
Touch the plus (+) or minus (−) sign next to
this symbol to increase or decrease the treble. Touch
the center position to adjust the setting to the center.
3-5
Your system is designed to automatically store the
audio adjustment settings. If you want to program them
yourself, use the following procedure:
1. Press the BAND hard key until the desired source
appears on the display.
2. Touch the AM, FM, XM, WX, and A.B.C screen
buttons to access the preset screen and select
the desired preset.
3. Touch the audio adjust (e) screen button.
4. Make the audio adjustments desired. Set the level
for treble, mid, bass, fade, balance, and DSP.
5. When you have finished the adjustments, the
Navigation System will automatically store them with
the selected preset.
Audio Pilot: With this feature, your audio system
compensates for unwanted noise in the vehicle.
AudioPilot® automatically adjusts the volume level so that
it always sounds the same to you. To use AudioPilot®,
touch the AudioPilot® screen button. To turn it off, touch
the screen button again. When this feature is on, the
button will be highlighted. For additional information on
AudioPilot®, please visit www.bose.com.
Multi-channel: When available, touch this screen
button to play the DVD Audio source in surround mode.
Touch this screen button again to have the audio
play in 2-channel mode. The function depends on the
media in the DVD changer.
3-6
Adjusting the Speakers
The Digital Signal Processing (DSP) feature is used to
provide a choice of five different listening experiences.
DSP can be used while listening to the audio system or
the six-disc DVD changer. The type of DSP selected
is displayed on the status line.
You may choose from the following DSP settings:
Center Point: Touch this screen button to adjust the
audio to get the best sound quality when listening to an
XM™ audio source or CD/DVD. This feature creates a
multi-channel experience from CDs containing stereo
recordings. This feature is not available in AM and FM
audio modes.
Normal: For non-surround sound sources only. Touch
this screen button to adjust the audio to be in normal
mode. DSP will be in the off mode.
Driver: For non-surround sound sources only. Touch
this screen button to adjust the audio to give the
driver the best possible sound quality.
Talk: For non-surround sound sources only. Touch this
screen button when listening to non-musical material
such as news, talk shows, and sports broadcasts. The
Talk DSP setting makes spoken words sound clear.
Rear Seat: For non-surround sound sources only.
Touch this screen button to adjust the audio to give the
rear seat occupants the best possible sound quality.
Radio Data System (RDS)
XM™ Satellite Radio Service
The audio system has a Radio Data System (RDS).
RDS features are available for use only on FM stations
that broadcast RDS information. With RDS, the radio
can do the following:
XM™ is a satellite radio service that is based in
the 48 contiguous United States. XM™ offers
100 coast-to-coast channels including music, news,
sports, talk, and children’s programming. XM™ provides
digital quality audio and text information, including
song title and artist name. A service fee is required in
order to receive the XM™ service. For more information,
contact XM™ at www.xmradio.com or call
1-800-852-XMXM (9696).
• Seek to stations broadcasting the selected type of
programming
• Receive announcements concerning local and
national emergencies
• Display messages from radio stations
• Seek to stations with traffic announcements
The RDS system is always on. When information is
broadcast from the FM station you are listening to, the
information will be displayed on the audio screen.
While in XM™ mode, the Artist Name/Feature,
Song/Program Title, and Channel Category will update
and be displayed on the screen as new information
becomes available.
Info (Information): Touch this screen button to allow
the ability to display additional Information messages as
they become available.
XL (Explicit Language Channels): XL on the radio
display, after the channel name, indicates content with
explicit language. These channels, or any others,
can be blocked at a customer’s request, by calling
1-800-852-XMXM (9696).
3-7
Category: Select the Category button to search for a
station using a category. The categories are displayed on
the preset area. Use the arrows to the left of the category
button to scroll through the available categories. The
current category name is displayed in the middle of the
arrows. The category display on the screen will time out
after 6 seconds if you do not select anything. While in
category mode, you can scroll through the category list,
select a category type and then scroll through the
channels available in each list. To exit the category mode
press the Category button again.
Group Name
POP
EASY
TALK
CNTRY
CLASS
JAZZ
3-8
Category
Rock
Classic Rock
Adult Hits
Top 40
Oldies Music
Nostalgia
College
Soft Rock
Soft
R&B
Soft R&B
Religious Music
News
Information
Sports
Talk
Language
Religious Talk
Personality
Public
Weather
Country Music
Classical
Jazz Music
To select a category, do the following:
1. Select the XM™ audio source.
2. Select the Category screen button.
3. The Navigation System will display the available
category on the presets.
4. Use the left and right arrows to scroll through the
presets or use the seek up/down hard key to go to
the next category.
5. Select the desired category by touching it from the
screen.
To view the available channels within the category,
select the category as explained above, and then use
the tune knob or seek button to scroll through the
available channels within the selected category.
Category Scanning: This function allows you to scan
through the channels on a specific category. To
activate the category scan function, do the following:
3. The Navigation System will display the available
category on the presets.
4. Use the left and right arrows to scroll through the
presets or use the seek up/down hard key to go to
the next category.
5. Select the desired category by touching it from the
screen.
6. Touch the Scan screen button and the system will
can through the channels available within the
selected category.
Scan and Preset Scan: While in XM™, the scan
function allows you to scan through the XM™ band.
Press the Scan screen button and the system will start
scanning. Press the Scan button again to turn the
scan function off. Press and hold the Scan screen button
to have the system scan the presets stored on the
XM™ band.
1. Select the XM™ audio source.
2. Select the Category screen button.
3-9
XM Radio Messages
Radio Display Message Condition
Action Required
XM Updating
Updating encryption code The encryption code in your receiver is being updated, and
no action is required. This process should take no longer
than 30 seconds.
No XM signal
Loss of signal
Your system is functioning correctly, but you are in a location
that is blocking the XM signal. When you move into an open
area, the signal should return.
Loading XM
Acquiring channel audio
(after 4 second delay)
Your radio system is acquiring and processing audio and text
data. No action is needed. This message should disappear
shortly.
Channel Off Air
Channel not in service
This channel is not currently in service. Tune in to another
channel.
Channel Unavail
Channel no longer
available
This previously assigned channel is no longer assigned.
Tune to another station. If this station was one of your
presets, you may need to choose another station for that
preset button.
No Artist Info
Artist Name/Feature
not available
No artist information is available at this time on this channel.
Your system is working properly.
No Title Info
Song/Program Title
not available
No song title information is available at this time on this
channel. Your system is working properly.
3-10
Radio Display Message Condition
Action Required
No CAT Info
Category Name
not available
No category information is available at this time on this
channel. Your system is working properly.
Not Found
No channel available for
the chosen category
There are no channels available for the category you
selected. Your system is working properly.
No Information
No Text/Informational
message available
No text or informational messages are available at this time
on this channel. Your system is working properly.
XM Theftlocked
Theft lock active
The XM receiver in your vehicle may have previously been
in another vehicle. For security purposes, XM receivers
cannot be swapped between vehicles. If you receive this
message after having your vehicle serviced, check with the
servicing facility.
XM Radio ID
Radio ID label
(channel 0)
If you tune to channel 0, you will see this message alternating
with your XM Radio 8 digit radio ID label. This label is
needed to activate your service.
Unknown
Radio ID not known
(should only be if
hardware failure)
If you receive this message when you tune to channel 0,
you may have a receiver fault. Consult with your dealer.
Check XM Receiver
Hardware failure
If this message does not clear within a short period of time,
your receiver may have a fault. Consult with your retail
location.
3-11
Six-Disc CD/DVD Changer
This system has the ability to play different types of
media formats. The system can play DVD - Video,
DVD - Video (DTS), DVD - Audio, CD - Digital
Audio (CD - DA), CD-DA (DTS), CD - Text, CD - Extra,
MP3 - CD, CDR, and CDRW. The system may also
play DVD - R and DVD - RW type discs depending on
the writing software used. The system will play DTS-type
discs and tracks and Dolby® tracks in surround sound.
M (Load): To load a disc(s) into the DVD changer,
press the DVD changer load hard key and follow
the screen message displayed.
Then, do the following:
1. Touch the number of the slot you will be loading the
disc into, numbered 1 to 6, at the bottom of the
CD/DVD changer screen.
2. Wait to insert the disc until the screen reads “Insert
Disc (number)”, then insert the disc partway. The
system will pull it in and start playing it. The system
will show you the type of disc inserted, DVD - Video,
BAudio for CD/DTS, MP3 for MP3 CDs, or
DVD - Audio.
3. If no CD or DVD is loaded in the CD/DVD changer
and you press the SRCE hard key a “No disc
loaded” error message will be displayed.
You may also choose to load all disc slots at once by
pressing and holding the CD/DVD changer load
hard key. The system will instruct you to insert each
disc when the screen displays “Insert Disc (number).”
When you load all the slots at once, the disc type will not
be displayed until the system reads that disc.
With the six-disc CD/DVD changer, you can play up to
six audio CDs, MP3s, DTS discs, audio DVDs, or
video DVD discs continuously.
3-12
To eject a disc(s) from the CD/DVD changer, do the
following:
Playing an Audio CD
1. Press the eject hard key.
2. Touch the available slot from the bottom of the
screen, numbered 1 through 6, that you wish to eject.
3. The system will display “Ejecting Disc” and then will
start to eject the disc. If a selection is not made, the
system will eject the disc in the current slot. If the
disc is not removed from the slot, the system
will load it after a 10 second delay and will then
start playing it.
You may also choose to eject all disc slots at once by
pressing and holding the CD/DVD changer eject
hard key. The system will instruct you to the disc number
being ejected.
Once you access the CD/DVD changer screen, you can
select one of the numbered screen buttons at the bottom
of the screen to go from one disc to another among those
loaded in the DVD changer. Any time a disc change
occurs, the system will display, “Changing Disc.”
The numbered screen buttons, 1 through 6, represent
the order of the discs loaded in the changer. If there are
only two discs loaded, only screen buttons 1 and 2
will be available to choose from.
3-13
The following features are also available from this screen:
Play: Touch one of the available screen buttons
1 through 6 to begin playing that disc automatically.
Scan: Touch Scan to hear the first 10 seconds of each
track on the selected disc. Touch Scan a second
time to hear the first 10 seconds of each track on each
audio CD disc loaded. Touch the OFF screen button
to stop all scanning. When the system has scanned
through all tracks on a disc or all first tracks of each CD
loaded, the system will automatically stop scanning.
M SCAN (Disc Scan): This symbol will appear at the
top of the CD/DVD changer screen when scanning
the first 10 seconds of each track on each disc. This
function scans all discs with the same type of media.
X (Scan Track): This symbol will appear at the top of
the CD/DVD changer screen when scanning the first
10 seconds of each track on the selected disc.
y (Random): Touch this screen button to hear the
tracks in random, rather than sequential, order on
the disc selected. Touch this screen button a second
time to hear the tracks and all discs loaded in random,
rather than sequential, order. Touch the OFF screen
button to turn off random play.
3-14
M RND (Disc Random): This symbol will appear at
the top of the CD/DVD changer screen when playing all
tracks and discs with the same type of media in
random, rather than sequential, order.
B RND (Random Disc):
This symbol will appear at
the top of the CD/DVD Changer screen when in random
disc mode.
k (Repeat): Touch this screen button to repeat the
track on the selected disc. To repeat the entire selected
disc, touch this screen button again. Touch the OFF
screen button to turn off the repeat mode.
X(Track Repeat): This symbol will appear at the top of
the CD/DVD changer screen when the repeat feature is
turned on. The system will repeat the current track.
B RPT (Disc Repeat):
This symbol will appear at the
top of the CD/DVD changer screen when the repeat
feature is pressed a second time. The system will repeat
the current disc.
« ª(Seek Up/Down): Press the up arrow hard key
to seek to the next selection on a disc. If playing the last
track of the disc, pressing the up arrow will seek to
the first track of the next disc. Press the down arrow
hard key to seek to the previous selection on a disc. If
playing the first track of the disc, pressing the down
arrow will seek to the last track on the selected disc.
OFF: Touch this screen button any time you want
to turn off the Scan, Random, or Repeat functions.
Playing an MP3 CD
Once you access the CD/DVD changer screen, you can
select one of the numbered screen buttons at the bottom
of the screen to go from one disc to another among those
loaded in the DVD changer. Any time a disc change
occurs, the system will display, “Changing Disc.”
The numbered screen buttons, 1 through 6, represent
the order of the discs loaded in the changer. If there are
only two discs loaded, only screen buttons 1 and 2
will be available to choose from.
The following features are also available from this
screen:
Play: Touch one of the available screen buttons
1 through 6 to begin playing that disc automatically.
Scan: Touch this screen button to hear the first
10 seconds of each track on the current folder. Touch
this screen button a second time to hear the first
10 seconds of each track on each folder of the current
disc. Touch this screen button a third time to have
the system play the first 10 seconds of each disc of the
media type selected. If there are no other CDs loaded
with the same type of media, the scan function will
cancel. When the system has scanned through all tracks
on a disc or all first tracks of each MP3 CD loaded,
the system will automatically stop scanning.
# SCAN (Folder Scan): This symbol will appear at
the top of the CD/DVD changer screen when scanning
the first 10 seconds of each track in the current folder.
3-15
y (Random): Touch this screen button to hear the
tracks in the current folder in random, rather than
sequential, order. Touch this screen button a second
time to hear the current disc played in random (tracks
and folders) order. Touch this screen button a third time
to hear the system play all discs of the same type of
media in random (discs, folders, and tracks) order.
If only one disc of this media type is loaded, the system
will play the folders and tracks in random order.
Touch the OFF screen button to turn off random play.
k (Repeat): Touch this screen button to repeat the
track on the selected disc. Touch this screen button
again to repeat all tracks within the current folder. Touch
this screen button a third time to repeat all tracks on
the current disc. Touch the OFF screen button to turn off
the repeat mode.
# RND (Track Random):
This symbol will appear at
the top of the CD/DVD changer screen when playing
tracks within the current folder in random, rather
than sequential, order.
# RPT (Folder Repeat): This symbol will appear
at the top of the CD/DVD changer screen when
the repeat button is touched a second time. The system
will repeat all tracks within the current folder.
B RND (Folder/Track Random):
B RPT (Disc Repeat):
This symbol will
appear at the top of the CD/DVD changer screen when
playing the folders and tracks on the current disc is
random order.
M RND (Disc Random): This symbol will appear at
the top of the CD/DVD changer screen when the system
is playing all discs, folders and tracks of the same
media type in random order.
3-16
X(Track Repeat): This symbol will appear at the top of
the CD/DVD changer screen when the repeat feature is
turned on. The system will repeat the current track.
This symbol will appear at the
top of the CD/DVD changer screen when the repeat
button is touched a third time. The system will repeat all
tracks and folders on the current disc.
« ª(Seek Up/Down): Press the up arrow hard key
to seek to the next selection on a disc. If playing the last
track of the disc, pressing the up arrow will seek to
the first track of the next disc. Press the down arrow
hard key to seek to the previous selection on a disc. If
playing the first track of the disc, pressing the down
arrow will seek to the last track on the selected disc.
OFF: Touch this screen button any time you want
to turn off the Scan, Random, or Repeat functions.
Display: Touch this screen button to display the MP3
play list. Use the up/down arrows to scroll through
the list. While in this menu, you can use the Scan,
Random, and Repeat functions.
# (Root Directory):
Touch this screen button to go
to the root directory, if available, on the MP3 disc.
While in this mode, you can select a specific folder to
be played.
HOME: Touch this screen button to allow you to go to
the Home folder. This is the first folder on the disc.
# + (Up to next folder): Touch this screen button to
go up to the next folder.
# – (Down to previous folder): Touch this screen
button to go down to the previous folder.
j (Pause):
Touch this screen button to pause play.
[ (Fast forward):
Touch this screen button to
fast forward through the current track.
r (Reverse): Touch this screen button to reverse
through the current track.
Combined Disc: This system will also play a combined
disc which contains CD-DA and MP3 types of media. Use
the CD screen button to switch between MP3 and CD-DA
tracks when you are playing a combined disc.
3-17
Playing an Audio or Video DVD
a (Page Up):
Touch the page up symbol to scroll up
through the pages of an audio DVD. The function of
this screen button depends on the disc inserted.
` (Page Down): Touch the page down symbol to
scroll down through the pages of an audio DVD. The
function of this screen button depends on the disc
inserted.
HOME: When playing an audio DVD, touching this
symbol will take you back to the home position of
the DVD.
r/[(Reverse/Fast Forward):
Touch the left or right
arrows to reverse or fast forward within a track.
Audio DVD screen shown, Video DVD screen similar
When listening to an audio or video DVD, you may
perform several functions, if available:
Display: Touch this screen button to access further
audio DVD options. See “More Audio and Video
DVD Options” later in this section.
w (Play): Touch the play symbol to begin playing the
currently selected disc.
j (Pause): Touch the pause symbol to pause the
currently playing disc.
o (Stop): Touch the stop symbol to stop the currently
playing disc.
L(Frame Advance):
Touching this screen button will
play the disc in slow motion.
3-18
Scan: Touch Scan to hear the first 10 seconds of each
track on the selected disc.
M SCAN (Disc/Track Scan): This symbol will appear
at the top of the DVD changer screen when scanning
both tracks and discs.
y (Random): Touch this screen button to hear the
tracks in random, rather than sequential, order on
the disc selected. Touch the OFF screen button to turn
off random play.
M RND (Disc Random): This symbol will appear at
the top of the DVD changer screen when playing tracks
and discs in the current group of discs in random,
rather than sequential, order.
k (Repeat): Touch this screen button to repeat the
track on the selected disc. Touch this screen button
again to repeat the tracks on the selected disc. Touch
this screen button a third time to repeat all of the discs in
the group. Continuing to touch this button will take
you through the choices again. Touch the OFF screen
button to turn off the repeat mode.
X (DVD Repeat): This symbol will appear at the top
of the DVD changer screen when the repeat feature
is turned on. The system will repeat the current track.
« ª(Seek Up/Down): Press the up arrow hard key to
go to the next track in the current group. If you are in
the last track, the system will go to the first track of the
next group. If you are in the last track of the last
group, the system will display an error message in the
upper right corner of the screen. Press the down
arrow hard key to go back to the beginning of the current
track. Press the down arrow hard key again to go to
the previous track in the current group. If you are in the
first track of the current group, pressing this hard key
will take you to the last track of the previous group.
If you are in the first track of the first group, the system
will display an error message in the upper right
corner of the screen.
OFF: Touching this screen button will turn off the scan,
random, and repeat functions.
3-19
More Audio and DVD Options
See the following option for more cursor information:
Audio DVD screen shown, Video DVD screen similar
Once you touch Display from the main audio DVD
menu, you have access to the following options:
Cursor: Touch this screen button to access the left,
right, up, and down cursors on the screen. The cursors
allow you to navigate through menu options on the
screen.
3-20
S,y,T,z(Cursor Arrows): Touch these cursor
screen buttons when you need to scroll through a list of
DVD items, such as track names, menu options, or
scene selection. Then touch Enter to set your selection.
Menu: Touch this screen button to access the DVD’s
menu options. Depending on the type of DVD you are
using, this screen button may or may not be available.
DVD Menu: Touch this screen button to access the
video DVD menu.
While watching a video DVD or playing an audio DVD,
you can touch anywhere on the screen to remove
the DVD menu for easier viewing. Touch anywhere on
the screen again to display the DVD options.
Audio: Touch this screen button to change the audio
language heard. This may not be available on all DVDs.
Depending on the type of DVD you are using, this
screen button may or may not be available.
Angle: Touch this screen button to adjust the viewing
angle of the DVD. Some DVDs allow you to change the
camera angle. This may not be available on all DVDs.
Depending on the type of DVD you are using, this
screen button may or may not be available.
Subtitle: Touch this screen button to play back the
video with subtitles. This may not be available on
all DVDs. Depending on the type of DVD you are using,
this screen button may or may not be available.
Search: Touch this screen button to search through a
DVD by Title/Group, or Chapter/Track. Touch Keypad
to access the numeric keypad used to enter data
in these searches.
To use the search button, do the following:
1. Touch the Search screen button from the
DVD-Video or DVD-Audio screen.
2. Touch the Keypad screen button to access a
numeric keypad to enter the track/chapter number.
3. Touch the OK screen button and the system will go
to the specified track/chapter.
3-21
Screen Adjust: Touch this screen button to access the
audio/video DVD screen adjust menu.
Tint: Touch the plus (+) or minus (−) signs next to this
symbol to increase or decrease the screen tint.
From this screen, you will have the following options:
' (Color Symbol):
Touch the R for red or G for green
next to this symbol to increase or adjust the color of
the screen.
p (Widescreen):
Touch this screen button to view a
video DVD in widescreen format.
d (Full Screen): Touch this screen button to view a
video DVD in full screen format.
e (Normal Screen):
Touch this screen button to view
a video DVD in normal screen size.
_ (Contrast):
Touch the plus (+) or minus (−) signs
next to this symbol to increase or decrease the contrast.
] (Brightness):
Touch the plus (+) or minus (−)
signs next to this symbol to increase or decrease the
brightness.
3-22
Six-Disc DVD Changer Errors
Radio Personalization
Although the DVD or CD you are playing meets
regulation requirements, there are circumstances that
may cause the disc to not play correctly in your system.
Some of those circumstances may include the
recording conditions of the disc, the disc condition and
the pick up circumstances of the player.
With this feature, you can recall the latest audio system
settings as adjusted the last time your vehicle was
operated. This feature allows two different drivers to
store and recall their own audio system settings.
The settings recalled by the audio system are
determined by which RKE transmitter (1 or 2) was used
to enter the vehicle. The number on the back of the
RKE transmitter corresponds to driver 1 or to driver 2.
The audio system settings will automatically adjust
to where they were last set by the identified driver. The
settings can also be recalled using the memory
screens under the CONFIG MENU or voice recognition.
See Personalization on page 5-2 for more information.
If using your system in extremely low or high
temperatures, the video playback may become distorted.
Because of some types of compression techniques
used during recording MP3 discs, the sound quality of
the discs can be inferior. This is not caused by your
audio system.
When battery power is removed and later applied, you
will not have to reset your audio system preset stations.
3-23
✍ NOTES
3-24
Section 4
Voice Recognition
Voice Recognition ............................................4-2
4-1
Voice Recognition
The navigation system’s voice recognition allows for
hands-free operation of navigation, phone, audio system,
climate controls, windows, OnStar®, and memory
features. Voice recognition can be used when the ignition
is on or when Retained Accessory Power (RAP) is active.
See “Retained Accessory Power (RAP)” in your vehicle’s
owner manual for more information.
To use voice recognition, do the following:
1. Press the talk symbol
steering wheel control
and release it when
you hear a beep. The
audio system, if on,
will mute.
2. Clearly state one of the commands listed on the
following pages. When the system recognizes the
command, it will either perform the function, ask you
to confirm your choice by clearly stating “yes or
no”, or issue an error message such as “System
does not recognize this command” or direct you to
“Please start speaking after the beep”. You may
also get a message saying, “System is checking the
disc. Please wait.” if the system is not yet ready.
To cancel a command or if the system talk
back does not match your verbal command, press
and hold the talk symbol button. The system
will reply, “System will cancel the voice recognition.”
If you experience difficulty with the system recognizing a
command, try saying it more softly, and wait for a few
seconds after the beep, or you may just try saying
it again.
To use the voice recognition system, the map DVD
must be loaded.
When you are in the navigation screens, the system will
display a symbol (|) while the voice recognition is active.
4-2
This system is able to recognize commands in five
different languages. The system will only recognize
commands based on the language selected.
Voice Recognition Help
Help commands can be displayed on the screen while
you are stopped. When the vehicle is moving, the
system will let you know that this command is not
available while driving. To enter the help screens, clearly
state one of the help commands.
While in the help menu, you can select from two
screens, the Command List and the Operating Guide.
The Command List shows a list of available voice
recognition commands to use. Touch the Command List
screen button and then touch one of the buttons on
the right of the screen to choose the commands to list.
Use the up and down arrows to scroll through the
list of commands.
Navi (Navigation): Touch this screen button to display
the list of navigation commands.
Radio: Touch this screen button to display the list of
radio commands.
CD: Touch this screen button to display the list of CD
commands.
4-3
DVD: Touch this screen button to display the list of
DVD commands.
Heater: Touch this screen button to display the list of
climate control commands.
Disp. (Display): Touch this screen button to display the
list of display commands.
Phone: Touch this screen button to display the list of
phone commands.
Nametag: Touch this screen button to display the list of
nametag commands.
Etc.: Touch this screen button to display the list of
miscellaneous commands, such as OnStar®, windows,
and personalization.
The Operating Guide screen gives step-by-step
directions for using the voice recognition feature. Touch
the Operating Guide screen button and then touch
one of the buttons on the right of the screen to choose
the instructions to list. Use the up and down arrows
to scroll through the instructions.
Start: Touch this screen button to display instructions
on how to start using the voice recognition system.
Cancel: Touch this screen button to display instructions
on how to cancel a command, what to do in case of
an error, and other helpful hints.
Dest. (Destination): Touch this screen button to
display instructions on how to use voice recognition to
plan a route or how to use the destination command list.
Audio: Touch this screen button to display instructions
on how to use the radio commands.
Nametag: Touch this screen button to display
instructions on how to use and store a nametag.
4-4
Voice Recognition Commands
Display Commands
Display [set] language French: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to French. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] language English: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to English. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] language Spanish: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to Spanish. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] language UK English: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to UK English. Once the language is
changed, a command to return to another language
must be made using the selected language or from the
Language menu under the CONFIG MENU. See
Configure Menu on page 2-49 for more information.
Display [set] language German: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to German. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed with the
optional words in brackets. To use the voice commands,
refer to the instructions listed previously.
4-5
Display [set] language Italian: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to Italian. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] English units: This command instructs
the system to switch to English units of measurement.
All display settings will change.
Display [set] metric units: This command instructs the
system to switch to metric units of measurement. All
display settings will change.
Display [set] day mode: This command instructs the
system to switch the system display to day mode.
See “Screen Appearance” under Configure Menu on
page 2-49 for more information.
Display [set] night mode: This command instructs the
system to switch the system display to night mode.
See “Screen Appearance” under Configure Menu
on page 2-49 for more information.
Display [set] auto mode: This command instructs the
system to switch the system display to auto mode.
See “Screen Appearance” under Configure Menu on
page 2-49 for more information.
4-6
Display Help: This command instructs the system to
offer assistance with the previously listed display
commands. The Navigation System will display the
commands on the screen.
General Navigation Commands
A list of the commands will be displayed on the screen
while the vehicle is stopped. The following are
commands you can access by clearly stating the
commands exactly as they are written:
Navigation [show] current position, navigation
[show] current location: This command instructs the
system to show your vehicle’s current position on
the map.
Navigation [show] map: This command instructs the
system to show the current map screen.
Navigation [command] help, navigation [command]
list: This command instructs the system to state
the navigation command help list.
Navigation repeat [voice] [guidance]: This command
instructs the system to repeat the previous voice
guidance prompt.
Cancel: This command instructs the system to cancel
the most recently given command.
Map Commands
The following are map commands you can access by
clearly stating the commands exactly as they are written:
Navigation zoom in, navigation zoom out: These
commands instruct the system to zoom in or out on
the map.
Navigation zoom in maximum, navigation zoom out
maximum: These commands instruct the system to
zoom in or out to the maximum amount allowed.
Navigation right map zoom in, navigation right map
zoom out: These commands instruct the system to
zoom in or out on the map to the right when in dual
map mode.
Navigation right map zoom in maximum scale,
navigation right map zoom in minimum scale,
navigation right map zoom out maximum scale,
navigation right map zoom out minimum scale:
These commands instruct the system to zoom in or out
to the maximum or minimum allowed on the right
screen when in dual map mode. These commands are
available while the map screen is displayed and
dual map mode is on.
Navigation [change to] North Up [mode], navigation
[show] North Up [mode]: These commands instruct
the system to switch the map to North Up mode. These
commands are available while the map screen is
displayed.
Navigation [change to] Heading Up [mode],
navigation [show] Heading Up [mode]: These
commands instruct the system to switch the map to
Heading Up mode. These commands are available while
the map screen is displayed.
Navigation [change] map direction: This command
instructs the system to change the direction of the map to
heading up/north up depending on previous setting.
Navigation right map [change to] North Up [mode],
navigation right map [show] North Up [mode]: These
commands instruct the system to switch the map to
the right to North Up mode when in dual map mode.
These commands are available while the map screen is
displayed and dual map mode is on.
Navigation right map [change to] Heading Up
[mode], navigation right map [show] Heading Up
[mode]: These commands instruct the system to switch
the map to the right to Heading Up mode when in
dual map mode. These commands are available while
the map screen is displayed and dual map mode is on.
4-7
Navigation right map [change map] direction: This
command instructs the system to change the direction of
the map to heading up or north up depending on the
previous setting. This command is available while a map
screen is displayed when in dual map mode.
Navigation [show] dual map [mode], navigation
[change to] dual map [mode], navigation [show]
single map [mode], navigation [change to] single
map [mode]: These commands instruct the system to
switch between dual and single map modes. These
commands are available while a map screen is
displayed.
Navigation store [this point], navigation mark [this
point]: These commands instruct the system to store or
mark a point in its memory. These commands are
available while a map screen is displayed.
Navigation [change to] 3-D map [mode], navigation
[change to] 2-D map [mode]: These commands
instruct the system to switch between 2-D and 3-D map
modes. These commands are available while a map
screen is displayed.
4-8
Point of Interest (POI) Commands
The following is a list of POI commands. State the
commands exactly as they are written to receive
information from the system regarding that specific
command. POIs will only be displayed on the map screen
if the map scale is 1⁄2 mile (1 km) or less. If you try to have
POIs displayed on a map with the wrong scale, the
system will remind you of this. When you are ready to exit
the POI command mode, state “POI off”. The available
POI commands are the following:
Automobile Commands
• Navigation Automobile Club
•
•
•
•
•
•
•
•
•
•
•
•
Navigation Triple A
Navigation Car Wash
Navigation Gas Station
Navigation Gas
Navigation Parking
Navigation Parking Lot
Navigation Parking Garage
Navigation Car Park
Navigation Auto Service and Maintenance
Navigation Auto Service
Navigation Other Automotive
Navigation GM
Entertainment Locations
• Navigation Amusement Park
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Navigation Casino
Navigation Cinema
Navigation Golf Course
Navigation Historical Monument
Navigation Horse Racing
Navigation Marina
Navigation Museum
Navigation National and State Parks
Navigation Ski Resort
Navigation Skiing
Navigation Speedway
Navigation Sports Complex
Navigation Stadium
Navigation Performing Arts
Navigation Tourist Attraction
Navigation Tourist Information
Navigation Video Rental
Navigation Winery
Financial Locations
• Navigation ATM
• Navigation Bank
• Navigation Other Financial Services
Governmental Offices
• Navigation Town Center
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Navigation City Center
Navigation Convention Center
Navigation Exhibition Center
Navigation Court House
Navigation Government Offices
Navigation Higher Education
Navigation University
Navigation College
Navigation Hospital
Navigation Library
Navigation Parks and Recreation
Navigation Park and Recreation
Navigation Police Station
Navigation Post Office
Navigation School
4-9
Personal Services
• Navigation Beauty and Barber Shops
• Navigation Dry Cleaning
• Navigation Health and Fitness Club
• Navigation Business Facility
Restaurant Locations
• Navigation Restaurant
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Navigation I’m Hungry
Navigation Show Restaurant
Navigation American Restaurant
Navigation American Food
Navigation Chinese Restaurant
Navigation Chinese Food
Navigation Coffee House
Navigation Continental Restaurant
Navigation Continental Food
Navigation Fast Food
Navigation Fast Food Restaurant
Navigation French Restaurant
Navigation French Food
Navigation Ice Cream Parlor
4-10
•
•
•
•
•
•
•
•
•
•
•
•
Navigation Italian Restaurant
Navigation Italian Food
Navigation Japanese Restaurant
Navigation Japanese Food
Navigation Mexican Restaurant
Navigation Mexican Food
Navigation Seafood Restaurant
Navigation Seafood
Navigation Thai Restaurant
Navigation Thai Food
Navigation Other Restaurant
Navigation Other Food
Shopping Locations
• Navigation Convenience Store
•
•
•
•
•
•
•
Navigation Department Store
Navigation Grocery Store
Navigation Home and Garden
Navigation Pharmacy
Navigation Shopping Mall
Navigation Specialty Food Store
Navigation Other Retail Stores
Transportation
• Navigation Airport
•
•
•
•
•
•
•
Navigation Bus Station
Navigation Campground
Navigation Ferry Terminal
Navigation Hotel
Navigation Rental Car Agency
Navigation Rest Area
Navigation Train Station
Destination Commands
The following are destination commands you can
access by clearly stating the commands exactly as they
are written. Confirm your choice of destination entry
by responding to the system with “Enter destination”
when prompted. You may also state “Add waypoint” or
“To waypoint” after entering a destination to add a
waypoint along the route to your final destination. You
can cancel the command by stating, “cancel” after
the system talk back.
Navigation [go] home, navigation [select] home:
These commands instruct the system to set the
home preset as the destination.
Navigation [go to] starting point, navigation
[previous] starting point: These commands instruct
the system to set the previous starting point as the
destination.
Navigation [go to] previous destination: This
command instructs the system to set the previous
destination as the new destination.
Navigation [go to] preset destination [number] (one,
two, three, four, or five): These commands instruct
the system to set one of the preset destinations
one through five as the new destination.
Cancel: This command instructs the system to cancel
the most recently given command.
4-11
Nametag Commands
Guidance Commands
The following are nametag commands you can access by
clearly stating the commands exactly as they are written.
You may have up to 10 nametag entries for phone book
entries and 10 nametag entries for destinations.
The following are guidance commands you can access
by clearly stating the commands exactly as they are
written:
Navigation store name: This command lets the
system know you will be storing a name in memory.
The system will request that you state the nametag.
After the prompt, state the name desired for this point.
The system will play back the recorded nametag
and will request that you confirm it. After the prompt,
state “Yes” to confirm or “No” to cancel.
Navigation go to [destination] (nametag), navigation
select [destination] (nametag): These commands
instruct the system to select a destination saved under
the nametag you have stored. The system will ask
whether you want the nametag to be set as a waypoint
or final destination. State “waypoint” or “destination”
after the prompt.
Phone/telephone dial name (state specific name):
These commands instruct the system to dial the phone
number of a specific previously stored name. See “Phone
Book Screen” under Bluetooth® Phone on page 6-2 for
more information on how to store a nametag.
4-12
Navigation louder, navigation softer: These
commands instruct the system to increase and decrease
the volume of the voice guidance and voice recognition
system prompts.
Navigation [show] whole route [map], navigation
[show] entire route [map]: These commands instruct
the system to show the entire route from beginning
to end on the map.
Navigation show next waypoint [map]: This
command instructs the system to show the next
waypoint on the map.
Navigation show (first, second, third, fourth, or fifth)
waypoint [map]: These commands instruct the
system to show the first, second, third, fourth, or fifth
waypoint on the map.
Navigation show destination [map]: This command
instructs the system to show the final destination on
the map.
Navigation delete next waypoint, navigation cancel
next waypoint: These commands instruct the
system to cancel the next waypoint from the route. The
system will request that you confirm. After the prompt,
state “Yes” to confirm or “No” to cancel.
Navigation delete destination, navigation cancel
destination: These commands instruct the system to
cancel the current destination. The system will
request that you confirm. After the prompt, state “Yes”
to confirm or “No” to cancel.
Navigation delete all waypoints and destination,
navigation cancel all waypoints and
destination: These commands instruct the system to
cancel the current destination and all waypoints.
The system will request that you confirm. After the
prompt, state “Yes” to confirm or “No” to cancel.
Navigation voice guidance off, navigation voice
guidance on: These commands instruct the system to
turn route voice guidance off and on.
Navigation quick: This command instructs the system
to use the quick search planning method condition.
The system will request that you confirm. After
the prompt, state “Yes” to confirm or “No” to cancel.
Navigation normal: This command instructs the
system to use the normal search planning condition.
The system will request that you confirm. After the
prompt, state “Yes” to confirm or “No” to cancel.
Navigation short: This command instructs the system
to use the short search planning method condition.
The system will request that you confirm. After
the prompt, state “Yes” to confirm or “No” to cancel.
Navigation detour [entire route]: This command
instructs the system to add a detour to your route. The
system will request that you confirm. After the prompt,
state “Yes” to confirm or “No” to cancel.
Navigation [change to] arrow guide, navigation
[change to] arrow guidance: These commands
instruct the system to enter arrow guidance mode. This
command is only available while on a route.
Navigation [change to] turn list guide, navigation
[change to] turn list guidance: These commands
instruct the system to enter turn list guidance mode. This
command is only available while on a route.
Navigation [change to] freeway guide, navigation
[change to] freeway guidance: These commands
instruct the system to enter freeway guidance mode.
This command is only available while on a route.
Navigation [change to] intersection guide, navigation
[change to] intersection guidance: These commands
instruct the system to enter intersection guidance
mode. This command is only available while on a route.
4-13
Radio Commands
The following are radio commands you can access by
clearly stating the commands exactly as they are written.
The commands are only available when you are in
one of the following audio modes, AM, FM, XM™
(if equipped), or WX (if equipped).
Radio, radio turn off: These commands instruct the
system to turn the audio system on and off.
Radio [set] balance left, radio [set] balance right:
These commands instruct the system to increase
the balance to the maximum setting left or right.
Radio [set] fade front, radio [set] fade rear: These
commands instruct the system to increase the fade
to the maximum setting front or rear.
Radio [set] balance center, radio [set] balance
middle, radio [set] fade center, radio [set] fade
middle: These commands instruct the system to set
the fade or balance to the center and middle.
Radio scan up, radio scan down: These commands
instruct the system to scan up or down through radio
stations.
4-14
Radio [band] [select] AM, radio [band] [select] FM,
radio [band] [select] XM, radio [band] [select]
satellite, radio [band] [select] WX, radio [band]
[select] weather band: These commands instruct the
system to go to either the AM, FM, XM (if equipped),
or WX (if equipped) radio bands.
Radio [select] (frequency) AM, radio [select]
(frequency) FM, radio [select] (channel) weather
band: These commands instruct the system to go
to a specific frequency on either the AM, FM,
weather bands.
Radio [select] (channel) XM, radio [select] (channel)
satellite: These commands instruct the system to
go to a specific channel on the XM™ band (if equipped).
Radio set traffic, radio [set] traffic off, radio [turn]
traffic off: These commands instruct the system to turn
the traffic feature on or off.
Radio [show] [next] presets: This command instructs
the system to change to the next presets on the
active band.
Radio [select] center point [mode], radio [select] talk
[mode], radio [select] rear seat [mode], radio
[select] driver [mode], radio [select] normal [mode]:
These commands instruct the system to switch
between the different DSP settings.
Radio autostore: This command instructs the system
to enter radio autostore mode. The autostore function
must be selected on from the audio setup screen
for each band.
Radio help: This command instructs the system to
assist with radio commands. The radio commands will
be displayed on the screen.
CD Commands
CD [set] fade front, CD [set] fade rear: These
commands instruct the system to increase the fade to
the maximum setting front or rear.
CD [set] balance center, CD [set] balance middle,
CD [set] fade center, CD [set] fade middle: These
commands instruct the system to set the fade and
balance to the center position.
CD scan up: This command instructs the system to
scan upward through tracks.
CD [select] disc (one, two, three, four, five, or six):
These commands instruct the system to select disc
number one through six. The system will select
the specified disc and start to play it.
The following are CD/MP3 commands you can access
by clearly stating the commands exactly as they are
written. The commands are only available when a CD
is inserted.
CD [select] track (one, two, three, etc.): This
command instructs the system to select a specific
track number.
CD, CD turn off: These commands instruct the system
to turn the audio system CD Changer on and off.
CD [select] disc (one, two, etc.) track (one, two,
etc.): This command instructs the system to select a
specific disc and track number on that disc.
CD [set] balance left, CD [set] balance right:
These commands instruct the system to increase the
balance to the maximum setting left or right.
CD [select] next track, CD [select] previous track:
These commands instruct the system to go to the
next or previous track on a disc.
4-15
CD eject [disc], CD eject [disc] (one, two, etc.):
These commands instruct the system to eject one disc,
or a specific numbered disc.
CD [select] center point [mode], CD [select] talk
[mode], CD [select] rear seat [mode], CD [select]
driver [mode], CD [select] normal [mode]: These
commands instruct the system to switch between
the different DSP settings.
CD help: This command instructs the system to assist
with CD changer commands. Help commands will be
displayed on the map screen when the vehicle is
stopped.
DVD Changer Commands
The following are DVD commands you can access by
clearly stating the commands exactly as they are written.
The commands are only available when a DVD is
inserted.
DVD, DVD turn off: These commands instruct the
system to turn the DVD player on and off.
DVD [set] balance left, DVD [set] balance right:
These commands instruct the system to increase the
balance to the maximum setting left or right.
DVD [set] fade front, DVD [set] fade rear: These
commands instruct the system to increase the fade to
the maximum setting front or rear.
4-16
DVD [set] balance center, DVD [set] balance middle,
DVD [set] fade center, DVD [set] fade middle: These
commands instruct the system to set the fade and
balance to the center and middle.
DVD scan up: This command instructs the system to
scan upward through chapters/tracks.
DVD [select] disc (one, two, etc.): These commands
instruct the system to go to a specific disc.
DVD [select] chapter/track (one, two, etc.): These
commands instruct the system to go to a specific
chapter or track number.
DVD [select] disc (one, two, etc.) chapter/track
(one, two, etc.): These commands instruct the system
to go to a specific disc and chapter/track.
DVD [select] previous chapter/track: This command
instructs the system to select the previous chapter
or track.
DVD [select] next chapter/track: This command
instructs the system to select the next chapter or track.
DVD eject [disc], DVD eject [disc] (one, two, etc.):
These commands instruct the system to eject one disc,
or a specific numbered disc.
DVD [select] center point [mode], DVD [select] talk
[mode], DVD [select] rear seat [mode], DVD
[select] driver [mode], DVD [select] normal [mode]:
These commands instruct the system to switch
between the different DSP settings.
Heater/heat/AC/air conditioning [set] temperature
(number): This command instructs the system to
set the heater or air conditioning to a specific
temperature. You must state the temperature number
when using this command.
DVD help: This command instructs the system to assist
with DVD changer commands. Help commands will
be displayed on the map screen when the vehicle
is stopped.
Heater/heat/AC/air conditioning defrost/defog,
heater/heat/AC/air conditioning turn defrost/defog
off: These commands instruct the system to turn
both the defrost and defogger on and off.
Climate Control Commands
Heater/heat/AC/air conditioning front defrost/defog,
heater/heat/AC/air conditioning turn front
defrost/defog off: These commands instruct the
system to turn the front defrost or defogger on and off.
The following are climate control commands you can
access by clearly stating the commands exactly as they
are written.
Heater/heat, heater/heat turn off: These commands
instruct the system to turn the heater in the vehicle
on and off.
AC/air conditioning, AC/air conditioning turn off:
These commands instruct the system to turn the
air conditioning in the vehicle on and off.
Heater/heat/AC/air conditioning [set] fan high,
heater/heat/AC/air conditioning [set] fan low: These
commands instruct the system to change the heater
and air conditioning fan speed between high and low.
Heater/heat/AC/air conditioning rear defrost/defog,
heater/heat/AC/air conditioning turn rear
defrost/defog off: These commands instruct the
system to turn the rear defrost or defogger on and off.
Heater/heat/AC/air conditioning help: This command
instructs the system to assist with climate control
commands. Help commands will be displayed on the
map screen when the vehicle is stopped.
4-17
Personalization Commands
The following are personalization commands you can
access by clearly stating the commands exactly as they
are written. These functions are available to help with
setting, storing, and recalling driver settings.
Set driver one, set driver two: These commands
instruct the system to change the driver setting between
driver 1 and driver 2. See Personalization on page 5-2
for more information.
Set driver exit: This command instructs the system to
set/store an exit position for the driver that has been
chosen. Adjust your seat and steering wheel exit
position before stating this command.
Select driver one: This command selects the memory
settings for driver 1. The seat, steering wheel and
navigation system settings will change to those stored
by driver 1.
Select driver two: This command selects the memory
settings for driver 2. The seat, steering wheel and
navigation system settings will change to those stored
by driver 2.
4-18
Select driver exit: This command instructs the system
to select the exit position for the currently chosen driver.
Driver help: This command instructs the system to
assist with driver commands. Help commands will
be displayed on the map screen when the vehicle is
stopped.
Window Commands
Windows up, windows down: These commands
instruct the system to express up or express down the
windows. The system will request that you confirm. After
the prompt, state “Yes” to confirm or “No” to cancel.
Windows help: This command instructs the system to
assist with window commands. Help commands will
be displayed on the map screen when the vehicle
is stopped.
Phone Commands
OnStar® Command
These commands will only function if a Bluetooth®
phone has been paired with the navigation system, is
available in the vehicle, and is on.
OnStar: This command instructs the system to connect
to OnStar®. You will enter the OnStar® voice recognition
system. Refer to your OnStar® manual for more
information.
Phone/telephone enter: These commands instruct the
system to dial a phone number after it is stated.
State the number including the area code
(ex. 555 123 4567) then state “dial.”
Phone/telephone redial/recall: These commands
instruct the system to redial a phone number.
Phone/telephone help: These commands instruct the
system to assist with phone commands. Help
commands will be displayed on the map screen when
the vehicle is stopped.
4-19
✍ NOTES
4-20
Section 5
Vehicle Customization
Vehicle Customization ......................................5-2
Personalization ...............................................5-2
5-1
Vehicle Customization
Language
Personalization
Your vehicle is equipped with personalization that allows
you to program certain features to a preferred setting
for up to two people. Features such as driver position,
door lock personalization, passenger window
personalization, chime personalization, driver information
center, remote lock and unlock confirmation, suspension
system configuration, and remote start climate control
settings can be personalized.
This feature allows you to change the language that the
vehicle (instrument panel cluster, HUD, Navigation
system, etc.) is in. The languages available are
US English (male speaking voice) US English (female
speaking voice), UK English, German, French,
Italian, and Spanish.
5-2
To change the language, do the following:
Entering the Personalization Menu
1. Select the CONFIG hard key.
2. Touch the Vehicle screen button.
3. Select the globe screen button or choose the
desired language.
4. Your choice will be stored automatically.
If you become stuck in a language that you do not
understand, do the following:
1. Turn off the vehicle.
2. Open and close the door. Wait about 10 seconds.
3. Turn on the vehicle.
4. Press the map hard key.
5. Touch the globe symbol screen button from the
WARNING screen. See Getting Started on page 1-3
for more information. This will take you directly to the
Language screen. Choose the desired language.
Your choice will be stored automatically. All screens
will display text in the selected language.
To enter the personal settings mode, use one of the
following procedures:
1. Be sure the ignition is either on, in accessory mode,
or in RAP. The transmission must be in either
PARK (P), or the vehicle must be stopped.
2. Press any button on the appropriate keyless
access transmitter to identify yourself as Driver 1
or Driver 2. The driver number is shown on the
back of the keyless access transmitter.
3. Press the CONFIG hard key.
4. Touch the Vehicle screen button.
5-3
5. Access the Personal Menu Setting by pressing the
Personal Settings screen button.
6. The appropriate driver information should be
highlighted. If you wish to change driver numbers,
touch the appropriate screen button, either Driver 1
or Driver 2. The system will show the start up
screen when the driver is changed.
7. The Personal Settings button must be highlighted to
continue programming. If it is not highlighted, touch
it. If it is highlighted, touch any of the buttons on
the right of the screen to begin programming.
Some features have submenus that show additional
features that can be turned on or off. After entering a
submenu, select a feature and scroll through the menu
and make the necessary change.
Feature
Lights/Horns
Occupant
Information
Personalization Menu Settings Off Mode
If you choose not to use the Personalization Menu, the
following defaults will be active on your vehicle:
Feature
Lock/Unlock
5-4
Default Mode
All Doors unlock in park
All Doors unlock when PULLING
front door handle
Keyless Access All Doors lock 5 sec
after last door closed off
DELAY locking 5 sec after LOCK is
pressed and last door closed on
Occupant
Position
Remote Start
Default Mode
Lights flash at UNLOCK on
Lights flash at LOCK on
Exterior lighting at UNLOCK on
Horn chirps at LOCK off
External Audible Keyless Entry
Transmitter in vehicle reminder on
Twilight Delay will be set at 5 sec
Driver Greeting - standard driver
greeting
Chime Volume - Normal Chime
Volume
Passenger window Lockout off
Suspension Ride Control Mode
Touring
Recall Memory with START button
activation Off
REMOTE recall Memory Off
Auto EXIT Seat Recall Off
Auto EXIT steering column recall Off
Remote Start Off
Lock/Unlock
The following choices are available:
Automatic Door Unlock
If you turn this feature on, you may choose one of the
following options:
DRIVER unlock at OFF: This feature allows the
driver’s door to automatically unlock when the ignition is
turned off. When this feature is turned on, the button
will appear highlighted next to the feature name.
ALL doors unlock at OFF: This feature allows all of
the doors to automatically unlock when ignition is turned
off. When this feature is turned on, the button will
appear highlighted next to the feature name.
This feature allows you to change the automatic door
locking and unlocking and the keyless access transmitter
locking and unlocking.
DRIVER unlock in PARK: This feature allows the
driver’s door to automatically unlock when the
transmission is shifted into PARK (P). When this feature
is turned on, the button will appear highlighted next
to the feature name.
ALL doors unlock in PARK: This feature allows all
doors to automatically unlock when the transmission is
shifted into PARK (P). When this feature is turned on, the
button will appear highlighted next to the feature name.
5-5
Keyless Access Unlock
When this is selected, the keyless access system will
automatically unlock the door based on the position
of the transmitter. If you turn this feature on, you may
choose between the following two options:
ALL doors unlock when PULLING front door
handle: This feature automatically unlocks all of the
doors when you approach the vehicle with your keyless
access transmitter and pull either front door handle.
When this feature is turned on, the button will appear
highlighted next to the feature name. See “Door Locks”
in the index of your owner manual for more information.
FRONT door unlocks when PULLING front door
handle: This feature automatically unlocks the
appropriate front door when you approach the vehicle
with your keyless access transmitter and pull the
respective front door handle. When this feature is turned
on, the button will appear highlighted next to the
feature name. See “Door Locks” in the index of your
owner manual for more information.
You may also choose to activate one or both of the
following two options:
Keyless Access All Doors lock 5 sec after Last door
closed: This feature delays the locking of the vehicle’s
doors for up to five seconds after the lock button on the
keyless access transmitter is pressed. The five second
delay occurs after the last door is closed. If the keyless
access transmitter is left inside of the vehicle, the doors
will not lock. When this feature is turned on, the button
will appear highlighted next to the feature name.
DELAY locking 5 sec after LOCK is pressed and last
door closed: This feature delays the locking of the
vehicle’s doors for up to five seconds after a power door
lock switch or the lock button on the keyless access
transmitter is pressed. The five-second delay occurs
after the last door is closed. If the keyless access
transmitter is left inside of the vehicle, the doors will not
lock. When this feature is turned on, the button will
appear highlighted next to the feature name.
1. Choose the desired modes.
2. When you are finished, use the Back screen button
to return to the PERSONAL SETTINGS screen.
5-6
Lights/Horn
This feature allows you to choose the type of feedback
desired when using your keyless entry transmitter
and to set your vehicle’s Twilight Sentinel® delay time.
You can choose any or all of the following options:
Lights flash at UNLOCK: This feature allows the
exterior lamps to flash when the keyless access
transmitter is used to unlock the vehicle. All doors must
be closed for this feature to work, and the lamps will
not flash if the parking lamps or headlamps are
on. If Lights flash at UNLOCK is turned on and either
ALL doors unlock when PULLING front door handle
or FRONT door unlocks when PULLING front door
handle is turned on, the exterior lamps will flash when
the doors are passively unlocked. See “Automatic
Door Lock” earlier in this section for more information.
When this feature is turned on, the button will appear
highlighted next to the feature name.
Lights flash at LOCK: This feature allows the exterior
lamps to flash once when the keyless access
transmitter is used to lock the vehicle. All doors must be
closed for this feature to work, an the lamps will not
flash if the parking lamps or headlamps are on. If Lights
flash at LOCK is turned on and either ALL doors
unlock when PULLING front door handle or FRONT
door unlocks when PULLING front door handle is turned
on, the exterior lamps will flash when the doors are
passively unlocked. See “Automatic Door Lock” earlier
in this section for more information. When this feature is
turned on, the button will appear highlighted next to
the feature name.
5-7
Exterior Lighting at UNLOCK: This feature turns on
the exterior lamps when the keyless access transmitter
is used to unlock the vehicle. The lamps will remain
on for about 20 seconds unless a door is opened, the
ignition is turned to ACC, ON or START or the
keyless access transmitter is used to lock the vehicle.
When this feature is turned on, the button will appear
highlighted next to the feature name.
Horn chirps at LOCK: This feature sounds the horn
once when the keyless access transmitter is used to lock
the vehicle. All doors must be closed for this feature
to work. When this feature is turned on, the button will
appear highlighted next to the feature name.
External Audible Keyless Entry Transmitter remains
in vehicle reminder: This feature chirps the horn
three times when the driver’s door is closed and there is
a keyless access transmitter left inside the vehicle.
This will only occur when the vehicle is off. When this
feature is turned on, the screen button will appear
highlighted next to the feature name.
5-8
Twilight Delay: If this feature is activated, you can
choose the delay time that your exterior vehicle lights
will stay on when you exit the vehicle. If you choose Off,
the exterior lamps will not stay on when you exit the
vehicle. Only one made can be selected at a time. The
button next to the feature name will appear highlighted
when the setting has been selected. You can choose
any of the available options by touching the appropriate
time button.
1. Choose the desired settings.
2. When you are finished, use the Back screen button
to return to the PERSONAL SETTINGS screen.
Occupant Information
Chime Volume: You can choose a normal or high
volume level for the vehicle chime setting. The chime
volume cannot be turned off.
Suspension: If your vehicle has this feature, you can
select between performance or touring modes.
Performance mode is used where road conditions or
personal preference demand more control. This setting
provides more “feel” or response to road conditions.
Touring mode is used for normal city and highway
driving. This setting provides a smooth, soft ride.
This feature allows you to choose the greeting, chime
volume, suspension ride controls, and front passenger
window lockout settings.
Driver Greeting: You can choose between a personal
greeting and a standard greeting of Driver 1 or Driver 2.
This greeting is shown on the instrument cluster when
you turn the vehicle on.
Passenger Window Lockout: You can choose whether
or not to have the front passenger window deactivated
as part of the window lockout button. If you would
like the passenger window to be deactivated when the
window lockout button is pushed, choose this feature.
If this feature is left off, the window lockout button
located on the door will deactivate only the rear
windows. When this is on, the button next to this feature
name will appear highlighted. See “Power Windows”
in the index of your owner manual for more information.
1. Choose the desired settings.
2. When you are finished, use the Back screen button
to return to the Personal Settings screen.
If you choose to have a personal greeting, the next step is
to touch the Edit screen button. The alpha keypad will be
displayed. Type in the desired greeting. You may enter
up to 16 characters. When you are finished typing the
greeting, touch the OK screen button.
5-9
Occupant Position
REMOTE recall memory: When on, the previously
programmed seat and mirror positions will be recalled
when you press the unlock button on the keyless access
transmitter.
Auto EXIT Seat Recall: When on, your previously
programmed exit seat position is recalled when vehicle
is turned off, the shift lever is in PARK (P), and the
driver door is opened.
Auto EXIT steering column recall: When on, your
previously programmed exit steering column position is
recalled when vehicle is turned off, the shift lever is
in PARK (P), and driver door is opened.
1. Choose the desired settings.
This feature allows you to choose the memory features
you want activated automatically upon entering and
exiting the vehicle. You may select any or all of
the following settings:
Recall memory with START button activation: When
on, the previously programmed seat, mirror and
steering column positions will recalled when the START
button is pressed. See “Starting and Operating Your
Vehicle” in the index of your owner manual for
more information.
5-10
2. When you are finished, touch the Back screen
button to return to the PERSONAL SETTINGS
screen.
Remote Start
You may choose any or all of the following items:
1. The Remote Start screen button must be highlighted
for the remote start feature to be activated.
2. Once the remote start feature is activated, you can
choose any or all of the features shown.
Climate Control: If this feature is active, the climate
control system will engage when the vehicle is started
using the remote start feature. It will be at the same
climate control setting that was last used by the driver
using that keyless access transmitter.
Rear Defog: If this feature is active, the rear defogger
will engage when the vehicle is started using the
remote start feature.
This feature allows you to choose the features (if
equipped) you would like to have activate when you
engage the remote start on your vehicle. See “Remote
Vehicle Start” under “Keyless Access System Operation”
in the index of your owner manual for more information.
Seat Temperature Control: If this feature is active, the
seats will be heated or cooled, if equipped, when the
vehicle is started using the remote start feature.
5-11
Memory
Entering the Memory Menu
If your vehicle has the memory feature, you can
program and recall memory settings for the following
features for up to two drivers:
• The driver’s seat position.
• The outside rearview mirrors position.
To enter the memory programming mode, use the
following procedure:
• The telescopic steering column position.
• The language, radio and XM™ presets, tone,
•
•
•
•
volume, playback mode (AM/FM or CD), last
displayed stations and compact disc position are
set automatically.
The last climate control setting is set automatically.
The Head-Up Display (HUD) position, if equipped,
is set automatically.
Navigation System previous destination, stored
memory points, nametags, paired phones,
navigation voice prompts, etc. are stored
automatically.
Other personalization settings (for example,
remote start settings).
Memory features are programmed and recalled through
the Navigation System and the Voice Recognition
system. See “Entering the Memory Menu” later in this
section for more information on recalling and
programming the memory settings using the Navigation
System screen buttons.
5-12
1. Be sure the ignition is either on, in accessory mode,
or in RAP. The transmission must be in either
PARK (P), or the vehicle must be stopped.
2. Press any button on the appropriate keyless access
transmitter to identify yourself as Driver 1 or Driver 2.
The numbers on the back of the keyless access
transmitters correspond to the driver number.
3. Press the CONFIG hard key.
4. Touch the Vehicle screen button.
5. Press the Memory screen button.
6. Select either Recall Driver Settings or Store
Driver Settings.
7. The appropriate driver information should be
highlighted. If you wish to change driver numbers,
touch the appropriate screen button, either
DRIVER 1 or DRIVER 2.
8. Touch the Memory screen button.
Recall Driver Settings: Touch this screen button to
have your previously stored seat, steering column,
outside mirror, climate control and radio positions
recalled.
To recall driver settings using the Navigation System,
use the following procedure:
Store Driver Settings: This feature allows you to store
the seat, steering column, and outside mirrors
positions.
To store driver settings, using the Navigation System,
use the following procedure:
1. Select the CONFIG hard key.
1. Select the CONFIG hard key.
2. Select the Vehicle screen button.
2. Select the Vehicle screen button.
3. Select the Memory screen button.
3. Select the Memory screen button.
4. Select the Store Settings screen button.
4. Select the Recall Driver Setting screen button to
recall your previously stored settings.
5. Adjust your settings for the driver’s seat, the outside
mirrors, and the steering column to a comfortable
driving position.
If the vehicle is in PARK (P), a beep will sound and your
previously saved driving position will then be recalled.
If the vehicle is not in PARK (P), three beeps will sound
and your previously saved driving position will not be
recalled.
A memory recall can be stopped by pressing any
memory seat or mirror position button. If you would like
the stored driving positions to be recalled when
unlocking your vehicle with the keyless access
transmitter or when starting your vehicle, see “Occupant
Position” earlier in this section.
6. Select the Store Driver Settings screen button. A
beep will sound to confirm that the driver settings
are stored.
7. Repeat this procedure for a second driver by
programming the other driver number.
Your memory settings are now programmed. Any
changes that are made to the HUD, Navigation System,
and climate controls while driving will be automatically
stored when then ignition is turned off.
Driver Select: Change which driver is active by
touching this screen button. The numbers on the back
of the keyless access transmitters correspond to
the driver number.
5-13
Store Exit Settings: This feature allows you to store
exit positions for the seat and steering column.
To store exit settings using the Navigation System, use
the following procedure:
1. Select the CONFIG hard key.
2. Select the Vehicle screen button.
3. Select the Memory screen button.
4. Adjust your settings for the driver’s seat and the
steering column to a comfortable exit position.
5. Select the Store Exit Driver Settings screen button.
Two beeps will sound to confirm that your new exit
settings are saved.
6. Repeat this procedure for a second driver by
programming the other driver number.
Recall Exit Settings: This screen button allows you to
recall the seat and steering column to the appropriate
exit positions.
To recall exit settings using the Navigation System, use
the following procedure:
1. Select the CONFIG hard key.
2. Select the Vehicle screen button.
3. Select the Memory screen button.
4. Select the Recall Exit Settings screen button to
recall your previously stored exit settings.
5-14
If the vehicle is in PARK (P), a beep will sound and your
previously saved exit position will then be recalled. If
the vehicle is not in PARK (P), three beeps will
sound and your previously saved exit position will not
be recalled.
A memory recall can be stopped by pressing any memory
seat or mirror position button. If you would like the stored
exit positions to be recalled when your vehicle is in
PARK (P), the vehicle is off, and the driver’s door is
opened, see “Occupant Position” earlier in this section.
Memory Infotainment Settings and Presets
These settings and presets are set automatically.
They include the following:
•
•
•
•
•
•
Radio presets
Navigation
Address Book
Language
HUD display
Climate control settings
For more information, see each item in the index.
Section 6
Phone
Phone .............................................................6-2
Bluetooth® Phone ...........................................6-2
6-1
Phone
Bluetooth® Phone
Your vehicle is equipped with Bluetooth®. Bluetooth® is
a wireless communication system that allows you to
use a Bluetooth® compatible phone in a hands-free
mode. You may also set up a phone directory for use in
your vehicle. Up to 12 phones may be registered with
your Bluetooth® system, but only one phone may
be connected at a time.
Setting Up Your Bluetooth® Phone
In order to use your cellular phone with this Bluetooth®
system, your phone must be Bluetooth® compatible.
Please see your phone information to find out which
versions of Bluetooth® work with your phone.
My Info: Touch this screen button to display the details
of your Bluetooth® device including the name and
passkey information. Selecting Device Name allows you
to edit the name of the Bluetooth® device in your
vehicle. Selecting PASS-Key® allows you to edit the
pairing passkey used for your vehicle.
{ (Page Up):
This screen button scrolls up the list
one page at a time.
z (Page Down):
This screen button scrolls down the
list one page at a time.
6-2
F (Cancel):
Touch this screen button to return to the
BLUETOOTH PHONE screen.
Default: This screen button will set the highlighted
device to be the default. This will underline the default
device in the list.
Registered Device: Touch this screen button to display
a list of all Bluetooth® phones that are connected to
your vehicle. From this list you can set your default
device or change phones to be used in the vehicle.
Search: This screen button will begin the system’s
search for all available Bluetooth® phones in a
designated area.
New Device: Touch this screen button when you are in
the process of adding a new phone to be used in the
vehicle. From this menu you can receive a new
device or search for new devices.
W (Back): This screen button will return the screen to
the previous page.
Connect: This screen button will connect your phone to
the Bluetooth® system.
Receive: Touch this screen button to have your
Bluetooth® system connect to your phone when you are
using your phone as the device to initiate pairing.
This allows your phone to seek your vehicle and
connect. When this button is pressed, the Navigation
system is waiting to be connected.
Y (Delete):
a time.
This screen button will delete items one at
To set up your phone, do the following:
1. Press the CONFIG hard key to enter the Select
Setting Function screen.
2. Touch the Bluetooth® screen button (E).
3. Touch the Search screen button. The system will
search for all Bluetooth compatible phones within
the vehicle.
Your phone must be in the discoverable mode to be
found by the Bluetooth system.
4. The Device List screen will appear. Scroll through
the choices using the arrow buttons.
5. Choose your device by touching the icon next to
the device name.
6. Touch the Connect screen button. Your phone and
the Bluetooth® system will begin a connecting
procedure.
7. Follow the instructions on screen. They will differ
depending on your phone. Refer to your phone
instructions for further information.
6-3
Screen Explanation
q (Delete):
Touch this screen button to delete numbers
after they have been entered. Touch and release to
delete numbers one-by-one or hold it down to delete all
numbers.
Switch Call: Use this screen button to switch calls
during a call-waiting situation.
Hands Free: Choose this screen button to use the
phone like a speaker phone.
Private: Choose this screen button to use the phone
handset.
Last 10: This screen button will take you to a screen
showing your last 10 calls either sent or received.
You are able to place phone calls from this screen.
E (Bluetooth):
This is the Bluetooth® screen button.
F (Cancel):
This screen button will take you back
to the Navigation menu.
^ (Call Status): This area will indicate the call status. It
will indicate whether or not there is good signal strength
and whether or not the phone is in service range.
6-4
g (Phone Book): This screen button will take you to
the phone book screen.
V (Send/End Call):
This screen button will let you
place a call after using the alpha keypad or to cancel a
call at the end of the conversation. When you send
a call, the button will be green. When you are in a call
the button will be red to indicate that touching the button
will end the call.
Using Your Bluetooth® Phone
Once your phone has been set up, you are ready to
begin using it.
1. Press the AUX hard key to enter the BLUETOOTH
PHONE screen.
2. Touch the Bluetooth® screen button (E).
3. Use the keypad to dial the number you wish to call.
4. Touch the phone icon screen button to place the call.
5. When you are ready to hang up, press the phone
icon screen button again to disconnect the call.
Depending on the model of your Bluetooth® compatible
phone, you may be able to choose the Hands Free
or Private screen buttons. If you want to use the phone
through your speakers, use the hands free mode. If
you want to talk directly into your phone, choose
the private mode.
{ (Page Up):
This screen button scrolls up the list
one page at a time.
Phone Book Screen
y (Scroll Up): This screen button scrolls up the list
one entry at a time.
This screen allows access to your Bluetooth® Phone
Book where you can store names and phone numbers.
z (Scroll Down): This screen button scrolls down the
list one entry at a time.
z (Page Down):
This screen button scrolls down the
list one page at a time.
6-5
Q(OnStar):
Touch this screen button to use the
OnStar® system to place a phone call. See OnStar®
System on page 2-48 for more information.
To add a new phone book entry, do the following:
1. Touch the New screen button.
2. Touch a blank entry.
F (Cancel):
3. Touch the Edit screen button.
W (Back):
4. Use the keypads to input the name and telephone
number. You may have a maximum of
24 characters.
Touch this screen button to return to the
BLUETOOTH PHONE screen.
This screen button will return the screen to
the previous page.
qr (Scroll to End/Beginning):
These screen
buttons will allow you to scroll through the entry as
necessary.
5. If you want, you may also add a nametag to the
entry to work with the voice recognition. You may
have up to 10 nametags for phone book entries
in use at a time.
New: This screen button will begin the creation of a
new phone book entry.
6. When you have completed entering the information,
touch the OK screen button.
Edit: This screen button allows you to edit an existing
phone book entry.
Y All (Delete All):
This screen button deletes all phone
book entries.
Last 10: This screen button will take you to a screen
showing your last 10 calls either sent or received
using the Bluetooth system. You are able to place phone
calls from this screen.
V (Send/End Call):
This screen button will let you
place a call after touching the appropriate phone book
entry or to cancel a call at the end of the conversation.
6-6
To add a nametag to a specific name:
1. Select the PHONE BOOK screen.
2. Select the name that you wish to add a nametag to.
3. Select the Edit screen button.
4. Touch the Add Nametag screen button.
5. The system will request that you state the name
you wish to associate with this entry.
6. The system will repeat the name and request
confirmation. Say “Yes” to confirm or “No” to cancel.
Last 10 Calls Screen
F (Cancel):
This screen shows either the last 10 calls that have been
placed or the last 10 calls received by your Bluetooth®
system. The newest calls are at the top of the list.
W (Back): This screen button will return the screen to
the previous page.
Touch this screen button to return to the
BLUETOOTH PHONE screen.
qr (Scroll to End/Beginning): These screen
buttons will allow you to scroll through the entry as
necessary.
Save: This screen button will allow you to save the
entry in your phone book.
Y All (Delete All):
This screen button deletes all phone
book entries in the screen you are currently in, either
received or sent.
g (Phone Book): This screen button will take you to
the phone book screen.
V (Send/End Call):
{ (Page Up):
This screen button will let you
place a call after touching the appropriate phone book
entry or to cancel a call at the end of the conversation.
y (Scroll Up):
This screen button scrolls up the list
one entry at a time.
Sent: Touching this screen button will give you the
list of the last 10 calls sent from your Bluetooth® system.
z (Scroll Down):
Received: Touching this screen button will give you
the list of the last 10 calls received on your Bluetooth®
system.
This screen button scrolls up the list
one page at a time.
This screen button scrolls down the
list one entry at a time.
z (Page Down):
This screen button scrolls down the
list one page at a time.
6-7
✍ NOTES
6-8
A
G
Audio System .................................................. 3-2
Getting Started
Getting Started, Navigation ............................. 1-3
Global Positioning System (GPS) ...................... 2-59
B
Bluetooth®, Phone ............................................ 6-2
C
CD
Six-Disc CD Changer ................................... 3-12
K
Keyless Access System ................................... 2-47
M
Maps ............................................................ 2-41
D
Database Coverage Explanations ...................... 2-62
DVD, Six-Disc Changer ................................... 3-12
E
Enter Destination .............................................. 2-6
N
Navigation ................................................. 1-2, 1-3
Using the System .......................................... 2-2
O
OnStar® System ............................................. 2-48
Ordering
Map DVDs ................................................. 2-62
1
P
S
Phone, Bluetooth® ............................................ 6-2
Problems with Route Guidance ......................... 2-61
Six-Disc CD/DVD Changer ............................... 3-12
Stored Locations ............................................. 2-28
Symbols ........................................................ 2-43
System Needs Service, If ................................. 2-62
System Overview
Overview, Navigation System .......................... 1-2
R
Radio ............................................................. 3-2
Radio Personalization ...................................... 3-23
Remote, Keyless Access System ....................... 2-47
V
Vehicle Positioning .......................................... 2-60
Voice Recognition ............................................. 4-2
2
Download PDF

advertising