SLP20XP
XtremePro™ 18 Gauge 15⁄8" Finish Nailer
The SENCO® SLP20 Brad Nailer drives both slight-headed
and medium-headed brads in a wide range of lengths. As
the result of extensive customer research, the SLP20 design
ensures unmatched ease of use as well as superior precision
and driving power, which makes the tool suitable for
fastening a variety of material types and thicknesses.
Specifications
Item# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sequential actuation trigger
Reg. Operating Pressure. . . . . . . . . . . . . . . .
Air Consumption (60 cycles per min.) . . .
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tool Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fastener Capacity . . . . . . . . . . . . . . . . . . . . . .
430101N
70-120 psi (4.8 - 8.3 bar)
1.92 scfm
1/4" NPT
2.3 lbs (1 kg)
8.25" (210 mm)
9.5" (50 mm)
2" (50 mm)
110
Fastener Specifications
Gauge . . . . . . . . . . . . . . . . . . . . . . . . .
Fastener Range . . . . . . . . . . . . . . . .
Finish. . . . . . . . . . . . . . . . . . . . . . . . . .
Collation. . . . . . . . . . . . . . . . . . . . . . .
/ /
5 83 4
AY
18
⁵⁄8" – 1⁵⁄8"
Galvanized
Straight glued strip
1
Slight Head Brad
/ /
5 83 4
1
11/4 11/2 13/4
2
Applications
AX
Cabinets, decorative Trim, drawers, finishing apps in construction, furniture frames, furniture trim, mirror and picture
frames, molding, nailable plastic parts, rattan furniture,
upholstery trim panels, window beading and finish and trim.
Available Genuine SENCO Fasteners
Length
Features and Benefits
Count
Finish
Package
AY10EAA
AY11EAA
AY13EAA
5M
5M
5M
Galv
Galv
Galv
Box
Box
Box
/8 ”
AX10EAA
5M
Galv
Box
1”
1 1 /4 ”
AX13EAA
AX15EAA
5M
5M
Galv
Galv
Box
Box
1 1 /2 ”
AX17EAA
5M
Galv
Box
1 /8 ”
AX18EAA
5M
Galv
Box
1”
1 1 /4 ”
1 1 /2 ”
A201009
A201259
A201509
1M
1M
0.8M
Galv
Galv
Galv
Clamshell
Clamshell
Clamshell
/8 ” - 1 1 /4 ”
A209809
1.2M
Galv
Clamshell
1” - 2”
A209909
1.2M
Galv
Clamshell
3
• Five-year limited warranty
• Drives both slight-headed and medium-headed brads to
give you two tools in one.
• Weighs only 2.3 lbs. – the lightest weight available in a
brad nailer.
• Features easy side loading plus E-ZClear jam removel.
• Comfort-grip handle and the best balance and lowest
recoil in the industry.
• Superior power (40% more than comparable tools) makes
it suitable for use on hardwood, plastics, and
particleboard.
• Oil-free design means no lubrication to stain fine woods.
• Rugged composition enables magazine to withstand
on-the-job stress.
• Requires minimum maintenance, with only two movable
O-rings for virually trouble-free upkeep.
• Repair is easy, using only two Allen wrenches and the
do-it-yourself SENCOParts Kit.
• Comes complete in its own heavy-duty plastic case.
• Muffler ensures quieter operation.
Item Code
/8 ”
/4 ”
1”
5
5
5
Variety Packs:
5
www.senco.com
©2009 by SENCO Brands™, Inc .
SLP20XP
XtremePro™ 18 Gauge 15⁄8" Finish Nailer
Muffler ensures quieter operation.
Ultra-light 2.3 lbs.
Comfort Grip
Oil-free design means no lubrication
Minimum maintenance,
with only two movable
O-rings
Drives both
slight-headed and
medium-headed brads to
give you two tools in one.
Rugged composition
enables magazine
Low Load Indicator
Easy to check fasteners
Features easy side loading plus E-ZClear jam removel.
Choose the right actuation model!
Sequential Actuation Trigger (also known as restrictive trigger or
trigger fire) operates in the following sequence - depress the safety
element at the nose of tool against the work surface then pull the
trigger. After each fastener is driven, release the trigger and lift the
tool off the work surface before starting the sequence again. This
trigger is recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or
bottom fire) operates in the following sequence- pull the trigger
first and keep the trigger pulled while moving the tool along the
work surface with a bouncing motion, depressing the safety
element at the nose of the tool against the work surface where the
fastener is to be driven. This trigger is recommended for use by
trained professionals only in high production or volume applications.
For additional information on how SENCO will save you
time, reduce costs, and increase quality, call us at
1-800-543-4596 to find your nearest Authorized Senco
Dealer or Distributor or visit our web site at:
www.senco.com
www.senco.com
©2009 by SENCO Brands™, Inc .