advertisement
Code / Ref. Nr.:
Date:
530220
August 2009
Subject: Pedal On Ironers
WARNING:
•
Carry out the handling according to the following manufacturer’s instructions.
•
Always respect warnings from the relevant manuals of the machine.
•
Make sure all electric power or other energy sources are disconnected and closed before any servicing. Always turn off the main switch.
•
Wait 10 minutes after electrical power is disconnected to eliminate power on the inverter terminals.
•
Installation, maintenance and service must be executed by skilled service personnel only or by a service organisation with appropriate authorization from the manufacturer.
•
For service, use only original replacement parts.
•
Re-install all machine parts in the original way.
•
The qualified agency performing this work assumes all responsibility for this kit installation. Other service activities than described below, disable all manufacturers’ responsibility.
•
Make sure children are not around during work in progress.
Primus Belgium
Driemasten 126
B-8560 Gullegem
Belgium
Phone: +32 (0)56 43 52 00
Fax: +32 (0)56 40 34 63
E-mail: [email protected]
Web: www.primuslaundry.com
Primus Central Europe
Mistecká 1116
742 58, Příbor
Czech Republic
Phone:+420 556 768 800
Fax: +420 556 723 383
E-mail: [email protected]
Web: www.primuslaundry.com
Primus France
Rue Jacques Monod z.i. Est
F-69120 Vaulx-en-Velin
France
Phone:+33 (0)4 78 79 55 75
Fax: +33 (0)4 72 04 62 72
E-mail: [email protected]
Web: www.primuslaundry.com
Washer
PW5
P6, P7
C6, 8
RS6, 7, 10
RS13, (16), 18, 22, 27, 35
FS6, 7, 10
FS16, 22
FS33, 40, 55
FS120
MB16, 26, 33
MB44, 66
MB90, 140, 180
Applicable machine models
Dryer
DAM5 / DAMC5
DA9 / DAM(S)(T)9
T9
T11, 13, 16
T1313
T24, 35
DA11, 13, 15
DA1313
D25, 35
D55, 77
Pony
I18, 25, 30
I35, 50
IF50 / IR50
IFF
Crossfolder
Stacker
Ironer
Heating unit
Inlet
Soap hopper
Motor & pulley & belts
Drum
Door
Washer
General
Chasis
Shock absorbers
Cabinet
Controler
Coin unit
Electric components & sensors
Bearing house & seals
Applicable type of spare parts
Dryer
General
Chasis
Cabinet
Controler
Coin unit
Electric components & sensors
Heating unit
Motor & pulley & belts
Bearing house & seals
Drum
Door
Air filter
Air fan
Exhaust
Drain
Ironer
General
Chasis
Cabinet
Controler
Coin unit
Electric components & sensors
Heating unit
Inlet
Motor & pulley & chains
Bearing house
Ironer belts
Air filter
Air fan
Exhaust
Delivery system
Folding system
ECN 930
Page 2 of 5 Code / Ref. Nr: 530220
Description:
Several modifications were made on the stop pedal system on ironers I35, I50, IR50, IF50
(option). Please find details on the picture with corresponding explanation below.
The main features:
1. New design – ergonomically shaped pedal adapted to the “square design” of the machine
2. Self-locking in the transport position – when moved to the transport position, the pedal will be locked automatically on its right arm, so it cannot fall down during transport; to unlock the right arm has to be pushed upwards and then tilted down.
3. Precise end position – the shape of the pedal arms assures precise engaged position of the pedal; the micro switch is activated in this position without being pushed to its maximal extend – thus the micro switch is protected against too big force applied on the pedal and, on top of that, no adjustment is needed.
4. Spiral spring – the rubber spring is replaced by a spiral one, which assures a stable and definite control force. The reliability of the system and comfort of the operator is increased by this modification, together with items 1 and 3.
Page 3 of 5 Code / Ref. Nr: 530220
Page 4 of 5 Code / Ref. Nr: 530220
Spare parts:
Since too many parts are affected by these modifications please see the spare parts manual for the part numbers.
Implementation:
The modification was implemented in production since the following serial numbers:
I35-140 : 314I001410PL
I35-160 : 316I001574PL
I35-200 : 320I001558PL
I50-160 : 516I000599PL
I50-200 : 520I000656PL
I50-250 : 525I000659PJ
I50-320 : 532I000633PN
IF50-200 : 520IF000235xx*
IF50-250 : 525IF000252PL
IF50-320 : 532IF000262PL
IR50-200 : 520IR000142PL
IR50-250 : 525IR000143xx*
IR50-320 : 532IR000149PL
* last 2 characters were not known at the time of issuing of this e-service mail
In case you have further technical questions, do not hesitate to take contact with the after sales department of
PRIMUS (references at the front page of this document).
Page 5 of 5 Code / Ref. Nr: 530220
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement