M-System KS DC Alarm Instruction manual

The KS KS DC Alarm is a reliable and versatile device designed to monitor input signals and activate outputs based on predefined setpoints. This device is ideal for applications where precise monitoring and control of input signals are essential, such as in industrial automation, building management systems, and safety systems.

PDF Download
Document
M-System KS KS DC Alarm Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Adjustable Hi and Lo Setpoints
  • Hi and Lo LED indicators
  • Hi and Lo Setpoint Monitors
  • Relay Outputs
  • DIN Rail Mounting
  • Wall Mounting
  • Input Resistor (for current input)
  • Calibration Functionality
  • Comprehensive Installation Guide

Frequently asked questions

Use the Hi Adjustment and Lo Adjustment knobs on the front panel to set the desired Hi and Lo Setpoints. Refer to the manual for detailed instructions.

You can mount the KS KS DC Alarm on a DIN Rail or on a wall. The manual provides detailed instructions for both mounting methods.

Refer to the connection diagram on the front of the unit or in the manual for detailed instructions. Make sure to connect the power supply, input signal, and output load correctly.

The KS KS DC Alarm offers relay outputs that can handle various loads, including resistive, inductive, and capacitive. The specific load capabilities are listed in the manual. Refer to the output table for details.

Calibration is a simple process. Warm up the unit for at least 10 minutes and then adjust the input signal to test the trip points. If the trip points are out of tolerance, contact M-System's Sales Office or local representatives.
Preparing document for printing…
0%