VT/VR1900 Series GE IFS FM Video with Bi-Directional Security

VT/VR1900 Series GE IFS FM Video with Bi-Directional Security
GE
Security
VT/VR1900 Series
IFS FM Video with Bi-Directional
Data and Tamper Switch
Overview
Standard Features
The IFS VT/VR1900 Series video transmitter/receiver and
data transceiver supports the simultaneous transmission
of frequency modulation (FM) video, contact closure and
bi-directional data over one or two optical fibers. The
modules are universally compatible with major CCTV
camera manufacturers and support RS-232, RS-422, RS-485
(Tri-State 2 or 4-wire). Modules within the series are
available for use with multimode or single mode optical fiber.
Plug-and-play design ensures ease of installation requiring
no electrical or optical adjustments. The modules incorporate
power, and carrier detect status indicating LED’s to monitor
proper system operation. The modules are available in either
stand-alone or rack mount versions.
• FM Video Transmission reduces ghosting, jitter and cross-talk
between channels, providing superior video transmission
Function of tamper switch:
The tamper switch terminals on the VR will open upon one
of the following conditions; loss of carrier, loss of video,
switching of SW3 on the VT to the ON position.
Application Examples
• CCTV with Bi-Directional PTZ Camera Control
• CCTV with Access Control Communication
• CCTV with Remote Signalization
• CCTV with Remote Keyboard Control
• NTSC, PAL, SECAM Compatible
• NTCIP Compatible
• Supports Contact Closures, 24V AC/DC, 170ma Optically Isolated
• Optical Loss Relay Output
• Supports RS-232, RS-422, RS-485 (Tri-State 2 or 4-Wire)
• Transparent to Data Encoding/Compatible with Major CCTV
Camera Manufacturers
• Power and Carrier Detect Status Indicating LED’s to Monitor
System Performance
• Integrated WDM for Greater Product Reliability
• No In-field Electrical or Optical Adjustments Required
• Tested and Certified by an Independent Testing Laboratory
for Full Compliance with the Environmental Requirements
(Ambient Operating Temperature, Mechanical Shock, Vibration,
Humidity with Condensation, High-Line/Low-Line Voltage
Conditions and Transient Voltage Protection) of NEMA
TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment.
• Hot-Swappable Rack Modules
FM Video with
Bi-Directional Data
and Tamper Switch
Simultaneous transmission
of FM video, contact closure
and bi-directional data over
one or two optical fibers.
• Tamper Switch
• Automatic Resettable Fuses
• Full Color Compatibility
• Distances up to 43 Miles (69 km) Without Repeaters
• Comprehensive Lifetime Warranty
• Available in FiberPak™
GE
Security
Specifications
Video
Video Input: Bandwidth: Differential Gain: Differential Phase: Tilt: Signal-to-Noise Ratio (SNR): North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Wavelength
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
VTVR1910: 850 nm MM, VTVR1910WDM: 1310/850 nm MM
VTVR1920WDM: 1310/1550 nm MM, VTVR1930WDM: 1310/1550 nm SM
Contact closure
Contacts:
24v AC/DC, 170 mA, Optically Isolated Tamper/Optical Loss Relay Output
Number of fibers
VTVR1910: 2, VTVR1910WDM: 1, VTVR1920WDM: 1, VTVR1930WDM: 1
Connectors
Optical: Power:
Video: ST
Terminal Block with Screw Clamps
BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power:
Surface Mount:
Rack:
Number of Rack Slots:
Current Protection:
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount: Rack Mount: Shipping Weight:
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Environmental
MTBF: Operating Temp: Storage Temp: Relative Humidity: Agency compliance
1 volt pk-pk (75 ohms)
5 Hz - 6.0 MHz
<5%
<5°
<1%
>55 dB @ 10 dB ATTN.
12 VDC @ 300 mA
From Rack
1
Automatic Resettable Solid-State Current Limiters
Meets IPC Standard
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
< 2 lbs./0.9 kg
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VT1910
VR1910
Video Transmitter/Data Transceiver ((850 nm)
Video Receiver/Data Transceiver (850 nm)
2
13 dB
2 miles (3 km)
VT1910WDM
VR1910WDM
Video Transmitter/Data Transceiver (1310/850 nm)
Video Receiver/Data Transceiver (850/1310 nm)
1
14 dB
2.5 miles (4 km)
VT1920WDM
VR1920WDM
Video Transmitter/Data Transceiver (1310/1550 nm, Laser)
Digitally Encoded Video Receiver (1550 nm, Laser)
1
15 dB
9 miles (15 km)
Single Mode
9/125µm
VTVR1930WDM
VTVR1930WDM
Video Transmitter/ Data Transceiver (1310/1550 nm, Laser)
Video Receiver/Data Transceiver (1550/1310 nm)
1
23 dB
43 miles (69 km)
Accessories◆
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Multimode
62.5/125µm**
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ◆All accessories are third party manufactured.
System Design
up to 2 miles
(3.3 km)
Video
Video
VR1910
VT1910
(Coax)
(Coax)
ifs
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Control
Data
International
Fiber
Systems
Incorporated
203.426.1180
2 Fibers
62.5/125µm MM
Control
Optical Loss
Relay
Data
Distribué par CONNECTINFO - 01-30-28-90-20- www.connectinfo.fr - [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement