Performance in Concrete and Stone | DrilTec
1
Performance
in Concrete and Stone
Enhanced emphasis on ergonomics and operator convenience are
put to work in the design of DRILTEC drill bits and accessories.
To reduce the impact of “hand-arm vibrations” associated with the
use of electric rotary hammers, recent design developments for low
vibration techniques have been applied.
DRILTEC carbide bits are made to meet PGM standards as they
apply to safe drill-hole/anchor connection; geometrically precise
holes, to provide for maximum anchor grip and safety.
To optimize performance, DRILTEC rotary hammer accessories are
designed to OEM specifications and manufactured with state of
the art technologies and materials. Only high grade chrome-nickelmolybdenum steels, computer driven milling stations and most
modern vacuum brazing and hardening techniques are applied in
the manufacture of DRILTEC carbide bits.
The newly developed ADX small diameter SDS-Plus drill bits allow
for drilling concrete-embedded rebar and concrete metal deck. In
addition, the unique and extremely wear resistant carbide tip design
provides for an unsurpassed service life in concrete and stone.
ADX drill bits neatly extend the size range of our very successful
RL style RebarCUTTER™ for larger diameter holes.
Under the newly acquired Heller Anchor Bore brand DRILTEC
will soon introduce additional rotary hammer accessories to further
enhance product mix and market appeal.
CAUTION: Always wear eye, ear, and respiratory protection when using
masonry drill bits, chisels, and accessories. Grinding of carbide may
produce dust of potentially hazardous ingredient. Consult power tool
manufacturer for proper use of tools.
All Prices, Dimensions and Specifications are subject to change without notice!
WARRANTY: All DRILTEC products are warranted agains any defects
in material and workmanship. No other warranty is expressed or implied.
No warranty is applied or expressed with regard to the fitness of any
reconditioned tools, including products reconditioned in accordance to
supplied reconditioning instructions.
DRILTEC products are sold through authorized distributors only.
This literature was provided by your local authorized Driltec
distributor:
Copy rights:
Driltec, LLC,
THE DRILTEC LOGO, Heller Anchor Bore logo, JET-HEAD®,
AND BIONIC® ARE TRADEMARKS OF DRILTEC, LLC
Please note: Company names and product names indicated
have no affiliation with DRILTEC, LLC They are used for reference
only and are properties/Trademarks of the companies indicated.
Company/Model numbers in this brochure are for reference only.
Subject to change without notice.
2
DrilTec |
TABLE OF CONTENTS
DESCRIPTION
ITEM
PAGE
ADAPTER:
Core Bit Adapter, Ratio
15
Cruciform Adapter, Ratio
16
Snap-Lock Adapter
9
CHISEL:
3/4” HEX Chisel
18
1-1/8” Breaker Hammer Chisel
19
SDS-Max
22
SDS-Plus
21
SDS-Top
19
Spline Shank20
CORE BITS:
One-Piece
16
Ratio Core Bits
15
CRUCIFORM:
Drill Bits and Adapters
16
HEX QUICK CHANGE:
Multi-Purpose Drill Bits
9
MULTI-PURPOSE BITS:
Straight Shank
11
RATIO SYSTEM:
Core Bits
15
Cruciform Drill Bits
16
RebarCUTTER™14
REBAR CUTTER:
Small Diameters = ADX Drill Bits
Large Diameters = RebarCUTTER™14
SDS-MAX:
Adapters
3
Core Bits, Ratio
15
Cruciform, Ratio
16
Snap Lock
9
Chisels
22
Core Bits
16
One Piece
Ratio
15
Cruciform Drill Bits
16
Drill Bits
7
SDS-PLUS:
Adapters
15
Core Bits, Ratio
RebarCUTTER™, Ratio
14
9
Snap Lock
ADX small diameter Rebar drill bits
3
Chisels
21
Core Bits, Ratio
15
Drill Bits
5
Drill Bits Bulk
4
RebarCUTTER™14
Tapcon Drill Bits
17
SDS-TOP:
Adapters
Core Bits, Ratio
15
Cruciform, Ratio
16
Chisels
19
Core Bits, Ratio
15
Cruciform Drill Bits
16
Drill Bits
6
SAW BLADES:
Carbide Tipped - Wood, Rip & Cross
23
SPLINE SHANK:
Adapters
Core Bits, Ratio
15
Cruciform, Ratio
16
Snap Lock
9
Chisels
20
Core Bits
16
One Piece
Ratio
15
Cruciform Drill Bits
16
Drill Bits
8
STRAIGHT SHANK:
Heavy Duty - Rotary Percussion
10
Hex Quick Change Drill Bits
9
Multi Purpose - Universal Drill Bits
11
Tile & Marble Drill Bits
12
TAPCON:
Installation Kit & Accessories
17
SDS-Plus Hex Drill Bits
17
Straight Shank/Flat
17
TILE BITS:
Straight Shank
12
Performance in Concrete and Stone
ADX BITS for drilling
Rebar and Metal Deck
New!
For use with SDS-Plus Rotary Hammers
Uninterrupted
drilling through
Concrete and Steel…
Diameter
Use
Length
Total
Length
Part #
3/16"
4"
6"
ADX006018
1/4"
4"
6"
ADX007029
1/4"
6"
8"
ADX007041
5/16"
4"
6"
ADX011031
5/16"
10"
12"
ADX011049
• G
enerous spiral flute entrance geometry
for fast drill dust evacuation.
3/8"
4"
6"
ADX017059
3/8"
10"
12"
ADX017067
• B
low-back prevention through sub-trac
spiral flute design.
1/2"
4"
6"
ADX019073
1/2"
10"
12"
ADX019081
• N
oise damping effect due to ADX drillhead design.
9/16"
4"
6"
ADX021071
9/16"
10"
12"
ADX021087
• S
olid-Cross-Configuration of ADX
carbide head.
• F
irm and secured carbide embedment
with flank side reinforcements.
• S
ignificantly reduced “arm-handvibration” due to ADX multi-cutter head
design.
Note: Consult with structural design
engineer/architect before drilling rebar!
• U
nsurpassed drilling performance in
concrete and stone and yes, embedded
rebar and metal concrete deck.
Drilling tips…
• Made in Germany.
• C
onsult power tool manual before using
Rotary Hammer.
• Assure safe footing and all other safety
measures before attempting to use
power tool.
• Use Rotary Hammer in hammer drill
mode!
• When encountering rebar/steel apply firm
steady pressure.
Note: Consult with structural design engineer/architect before drilling rebar!
Performance in Concrete and Stone | DrilTec
3
SDS-PLUS DRILL BITS
AEG
B&D
BOSCH
Dewalt
HILTI
HITACHI
KANGO
MAKITA
MILWAUKEE
METABO
RAMSET
APH14, PH210
5009, 5013
11207, 11210
514K, 523K
TE 1, 2, 5, 6, 7
DH22
200, 285
BRH202, BRH240
2605, 5263
6010, 6011
425
PHE16, PHE19
5014, 5016
11211, 11212
540K, 557K
TE 10,12, 14
DH24
327, 422
BRH241
5302, 5303
6015, 6018
426, 430D
PHE20, PHE24
5053, 5054
11213, 11215
562K, 563K
TE 15, 16
DH25
HR160, 1821
5312, 5320
6020, 6021
redhead
PHE26
5056, 5057
11221, 11222
565K, 566K
TE 17, 18
H30PV
HR1830
5324, 5359
6024, 6026
555, 715
005K-2
11224, 11225
567K, 568K
TE 24, 25
VR16
HR2000, 2010,
5360, 5362
6028
11228, 11234
570K, DC232KL
TE 30, TE 40*
VRT22
11236, 11239
DW999K
TE/GP22
PANASONIC
HR2400, 2410
5363, 5365
BHA18, BHE22
ryobi
HR2420, 2431
5366, 5368
BHE24, BHE6015
ED160
ED211
11250, 11253
25101, 25103
Fein
EY6803
HR2432, 2450
5369, 5383
KHE24, KHE28
11255, 11258
25113, 25201
642
EY6813
HR2455, HR2475
M18, V28
KHE32
11524
25203, 25303
6372
EY7880
HR2511, HR2811
Porter cable
UHE22, UHE28
RH228VC
25304, 25313
HR3210, HR3000C
639
*Use with TE-C Connector
HITPACK SDS-Plus
SDS-Plus hit-pack
The most commonly used SDS-Plus drill bits conveniently
bulk-packed. For the Pro that has to drill many holes of
one size. Hit-Packs offer easy handling of drill bits without
all the packaging. Hit-Packs can be closed for secure
storage.
PRO-PACK
SDS-Plus
Drill Bits
BULK PACK NOT INDIVIDUALLY PACKAGED
DESCRIPTION DIAM. x LENGTH
5/32 x 6
3/16 x 4-1/2
3/16 x 6-1/4
1/4 x 4-1/2
1/4 x 6-1/4
1/4 x 8-1/2
5/16 x 6-1/4
3/8 x 6-1/4
1/2 x 6-1/2
1/2 x 10
5/8 x 6-1/2
SDS-PLUS Multi-packs
DESCRIPTION
DIAM. x LENGTH
3/16 x 4-1/2
3/16 x 6-1/4
1/4 x 4-1/2
1/4 x 6-1/4
5/16 x 6-1/4
3/8 x 6-1/4
1/2 x 6-1/2
metric sizes
SDS-Plus drill bits
Made in Germany.
4
DrilTec |
BULK PACK
12
12
12
12
12
12
6
6
6
6
3
SOLD IN QUANTITIES AS INDICATED ONLY!
Most popular SDS-Plus
drill bits in a convenient
pack. Attractively priced.
In today’s changing world many metric anchors have
entered the marketplace. To provide the proper metric
anchor hole requirement according to ISO standards,
DRILTEC offers a new range of metric SDS-Plus drill bits
to meet these needs.
PART NUMBER
AD-008-101
AD-012-104
AD-016-215
AD-048-105
AD-052-106
AD-056-218
AD-062-107
AD-080-109
AD-124-114
AD-128-115
AD-156-119
5 Pc.
ad-901-005
1
1
1
1
1
7 pc.
ad-901-007
1
1
2
1
1
1
SDS-PLUS METRIC
diam.
5 mm
6 mm
8 mm
10 mm
10 mm
12mm
12mm
14mm
14mm
15mm
16mm
18mm
18mm
20mm
24mm
28mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
useable
length
100
100
100
100
150
100
150
150
200
200
200
200
250
250
200
200
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
total
length
160
160
160
160
210
160
200
200
250
250
250
250
300
300
250
250
part
number
MD-005-160
MD-006-160
MD-008-160
MD-010-160
MD-010-210
MD-012-160
MD-012-200
MD-014-200
MD-014-250
MD-015-250
MD-016-250
MD-018-250
MD-018-300
MD-020-300
MD-024-250
MD-028-250
Performance in Concrete and Stone
SDS-PLUS DRILL BITS
Features &
Benefits
Sharper cutting edges, with two
center points for faster and more
accurate drilling.
Unique concave
carbide tip
design,
accelerates
drilling speed,
reduces wear
and supports
dust removal.
More carbide on both principle
cutting edges for superior durability.
A single wide spiral
flute reinforces
the core of
the drill bit,
maximizing
the power
transferred to
the carbide tip.
The smaller spiral flute allows
for the retention of the two wide
channels for faster
dust removal and
reduced spiral
flute wear.
The all new
special bead
blast technology
ensures a stronger and
highly flexible surface with increased
performance and reduced risk of bit
breakage.
Made in Germany.
sINGLE
CUTTER
BIONIC®
MULTI-CUTTER
diam.
x
useable
length
x
total
length
5/32
x
2
x
4-1/4
AD-400-219
-
5/32
x
4
x
6-1/2
AD-405-220
-
3/16
x
2
x
4-1/2
AD-410-104
-
3/16
x
4
x
6-1/4
AD-415-215
-
3/16
x
7
x
9-1/2
AD-420-221
-
3/16
x
9
x
11-1/2
AD-425-216
-
3/16
x
13
x
16
AD-430-260
-
7/32
x
4
x
6-1/4
AD-435-236
-
7/32
x
6
x
8
AD-440-237
-
7/32
x
9
x
11-1/2
AD-445-238
-
7/32
x
13
x
16
AD-450-265
-
1/4
x
2
x
4-1/2
AD-455-105
-
1/4
x
4
x
6-1/4
AD-460-106
-
1/4
x
6
x
8-1/2
AD-465-218
-
1/4
x
9
x
11-1/2
AD-470-183
-
1/4
x
13
x
16
AD-475-270
-
5/16
x
4
x
6-1/4
AD-480-107
-
5/16
x
6
x
8-1/2
AD-485-108
-
5/16
x
10
x
12-1/2
AD-490-222
-
3/8
x
4
x
6-1/4
AD-495-109
-
3/8
x
8
x
10-1/2
AD-500-110
-
3/8
x
10
x
12-1/2
AD-505-111
-
3/8
x
15-1/2
x
18
AD-510-112
-
3/8
x
19-1/2
x
22
AD-515-239
-
7/16
x
4
x
6-1/4
AD-520-113
-
7/16
x
10
x
12
AD-525-223
-
1/2
x
4
x
6-1/2
AD-530-114
-
1/2
x
8
x
10
AD-535-115
-
1/2
x
10
x
12
AD-540-116
-
1/2
x
15-1/2 x
18
AD-545-117
-
1/2
x
21-1/2 x
24
AD-550-240
-
9/16
x
4
x
6-1/2
AD-555-118
-
9/16
x
10
x
12-1/2
AD-560-228
-
9/16
x
15-1/2 x
18
AD-565-229
-
5/8
x
4
x
6-1/2
AD-570-119
-
5/8
x
7
x
9-1/2
AD-575-120
AD-580-320
5/8
x
10
x
12
AD-585-121
AD-590-325
5/8
x
15-1/2 x
18
AD-595-122
AD-600-330
5/8
x
21-1/2 x
24
AD-605-241
-
11/16
x
7
x
9-1/2
AD-610-123
-
11/16
x
10
x
12
AD-615-230
AD-620-345
3/4
x
7
x
9-1/2
AD-625-124
AD-630-350
3/4
x
10
x
12
AD-635-125
AD-640-355
3/4
x
15-1/2 x
18
AD-645-126
AD-650-360
7/8
x
7
x
9-1/2
AD-655-128
AD-660-365
7/8
x
10
x
12
AD-665-129
-
7/8
x
15-1/2 x
18
AD-670-130
AD-675-375
1
x
7
x
10
AD-680-184
AD-685-380
1
x
15-1/2 x
18
AD-690-185
AD-695-385
1-1/8
x
7-1/2
x
10
AD-700-250
AD-705-390
1-1/8
x
15-1/2 x
18
AD-710-255
-
Performance in Concrete and Stone | DrilTec
5
SDS-TOP DRILL BITS
The new striking force from DRILTEC for the emerging
SDS-Top mid range rotary hammers…
HILTI
TE35
SDS-Plus hammers with the ideal drilling range
of 5/32” to 1/2” in diameter and SDS-Max
hammers with the ideal drilling range of 1” to 2”
diameter leave a gap from 1/2” to 1”. The new
SDS-Top hammer generation fills this void…
connector end
SDS-Max
18 mm ø
SDS-Top
14 mm ø
SDS-Plus
10 mm ø
Drillbit Diameter
5/32"
Optimum Drilling
Range
1/2"
1"
2"
Limited Drilling
Range
DRILTEC offers a complete range of drill bits, chisels, core
bits and adapters for this new rotary hammer generation.
Made in Germany.
TE40*
TE46
*Use with TE-T Connector
SDS-TOP
Bit
Useable
Total
Diameter x Length x Length
BIT STYLE
PART NUMBER
1/4”x 4” x 8”
BIONIC®-TWINMAX
DT-011-011
1/4”x 8” x 12”
BIONIC®-TWINMAX
DT-015-015
5/16”x 4” x 8”
BIONIC -TWINMAX
DT-019-019
5/16”x 8” x 12”
BIONIC®-TWINMAX
DT-023-023
3/8”x 4” x 8”
BIONIC®-TWINMAX
DT-027-027
3/8”x 8” x 12”
BIONIC -TWINMAX
DT-031-031
3/8”x 16”x 20”
BIONIC®-TWINMAX
DT-035-035
7/16”x 8” x 12”
BIONIC -TWINMAX
DT-038-038
1/2”x 4” x 8”
BIONIC®-TWINMAX
DT-045-045
1/2”x 8” x 12”
BIONIC®-TWINMAX
DT-049-049 H
®
®
®
1/2”x 16”x 20”
BIONIC -TWINMAX
DT-053-053
1/2”x 20”x 24”
BIONIC®-TWINMAX
DT-057-057
9/16”x 8” x 12”
BIONIC®-TWINMAX
DT-063-063
9/16”x 16” x 20”
BIONIC -TWINMAX
DT-066-066
5/8”x 4” x 8”
JET-HEAD®
DT-070-070
5/8”x 8” x 12”
®
JET-HEAD
DT-075-075
5/8”x 16”x 20”
JET-HEAD®
DT-079-079
11/16”x
JET-HEAD®
DT-086-086
3/4”x 8” x 12”
®
JET-HEAD
DT-090-090
3/4”x 16”x 20”
JET-HEAD®
DT-094-094
7/8”x 8” x 12”
JET-HEAD®
DT-104-104
7/8”x 16”x 20”
JET-HEAD
DT-108-108
1” x 8”x 12”
JET-HEAD®
DT-118-118 H
1” x 16”x 20”
®
JET-HEAD
DT-122-122
1-1/8”x
12”
x
16”
JET-HEAD®
DT-132-132
1-1/8”x
18”
x
23”
JET-HEAD®
DT-136-136
1-1/4”x
12”
x
16”
®
JET-HEAD
DT-145-145
1-1/4”x
18”
x
22”
JET-HEAD®
DT-149-149
16” x
20”
®
®
®
H While Quantities Last
BIONIC® TIP
JET-HEAD®
6
DrilTec |
Performance in Concrete and Stone
SDS-MAX DRILL BITS
SDS
max
B&D
BOSCH
dewalt
HILTI
Hitachi
makita
mEtabo
milwalkee
WACKER
5097
11214EVS, 11216
541K
TE-80
DH40MA
HR4000C
6045
5313
EHB-7SM
5099
11223, 11227
545K
TE-F 52, 60
DH40MB
HR4001C
KHE76, 96
5308
EHB11BLM
11230, 11231
2570K
TE-F 72, 92
DH50MB
HR4010C
KANGO
5314
11235, 11240
D25600K
TE-Y 54, 55, 56
DH40MR
HR4500C
840M
5315
11241, 11245
D25602K
TE-Y 74, 75, 76
H60HR
HR5001C
5342
11263, 11264
D25651K
TE-Y 70
DH45MR
HR4510C
5346
D25712K
HR4002C
D25762K
HR5210C
Bionic
®
•Unique concave
carbide tip design,
accelerates drilling
speed, reduces wear
and supports dust
removal.
•Most rigid joints through
copper-silver brazing. Carbide is totally
embedded in both sides of the steel body.
Super tough TWINMAX™ flute. Fastest and
most efficient dust removal. Annealed, shotpeened chrome, nickel, molybdenum steel to
prevent premature fatigue failures.
• Industrial finish.
• Bit diameters meet ANSI standard.
jet-head®
•Jet-Head® carbide
head for smooth and
high performance
drilling, with less
vibration.
•Center point for easy
start up.
•Large relief slots for most efficient dust
removal.
• Bits provide for exact round holes.
• Bit diameters meet ANSI standards.
Made in Germany.
USEABLE
TOTAL
DIAM. x
LENGTH
x LENGTH
Single Cutter
Bionic®
Jet-Head®
3/8” x7-1/4x
13-1/2
SM-015-015
-
1/2”
x7-1/4x
13-1/2
SM-030-030
-
1/2”x10-3/4x17
SM-045-045
-
1/2”
x15x
21-1/2
SM-060-060
-
1/2”x21-3/4x28
SM-075-075
-
1/2”x30-1/2x36
SM-075-801
-
9/16”
x7-1/4x
13-1/2
SM-090-090
-
9/16”
x15x
21-1/2
SM-105-105
-
5/8”
x7-1/2x
13-1/2
SM-120-120
5/8”
x11x
17
SM-135-135
5/8”x15-1/4x
21-1/2
SM-150-150
5/8”
x22x
28
SM-165-165
5/8”x30-1/4x
36-1/4
SM-180-180
11/16”
x7-1/2x
13-1/2
SM-195-195
11/16”
x15-1/4x
21-1/2
SM-210-210
3/4”
x7-1/2x
13-1/2
SM-225-225
3/4”
x11x
17
SM-240-240
3/4”x15-1/2x
21-1/2
SM-255-255
3/4”x22-1/4x28
SM-270-270
3/4”x30-1/2x
36-1/4
SM-285-285
7/8”
x8x
13-1/4
SM-360-360
7/8”x11-1/2x17
SM-375-375
7/8”x15-3/4x
21-1/4
SM-390-390
7/8”x30-3/4x36
SM-405-405
1”
x8x
13-1/4
SM-420-420
1” x11-1/2x17
SM-435-435
1” x15-3/4x
21-1/4
SM-450-450
1” x30-3/4x
36-1/4
SM-465-465
1-1/8”
x11-1/2x17
SM-495-495
1-1/8”
x17x
22-1/2
SM-510-510
1-1/8”
x30-3/4x
36-1/4
SM-525-525
1-1/4”
x11-1/2x17
SM-540-540
1-1/4”
x17-x
22-1/2
SM-555-555
1-1/4”
x30-3/4x
36-1/4
SM-570-570
1-3/8”
x11-1/2x17
SM-600-600
1-3/8”
x17-x
22-1/2
SM-615-615
1-3/8”
x30-3/4x
36-1/4
SM-630-630
1-1/2”
x11-1/2x17
SM-690-690
1-1/2”
x17x
22-1/2
SM-705-705
1-3/4”
x15x
20-1/2
SM-745-745
2”
x15x
20-1/2
SM-765-765
Performance in Concrete and Stone | DrilTec
7
spline DRILL BITS
AEG
B&D
BOSCH
DEWalt
HITACHI
KANGO
MAKITA
METABO
MILWAUKEE
RAMSET
RYOBI
PH38
5041, 5042
11202, 11203
530K
DH38YE
430 S, 501 S
HR3851
RH66, RH99
5309, 5311
442, 445
ED382
PHD26
5043, 5044
11204, 11205
531K
DH40FA
637 S, 750 S
HR4040C
1129, 1130
5316, 5317
475
PHD38
5045, 5059
11209, 11214
532K
DH40FB
950 S, 978 S
HR5000
6030, 6040
5318, 5319
REDHEAD
5093, 5095
11219, 11220
533K
DS5OSB
6046
5321, 5341
747-2
5096, 5098
11232, 11233
5343, 5344
11244E, 11247
5347, 5348
11248
5352, 5345
DIAM.
•Made of chrome-nickel
molybdenum steel.
•Pointed carbide tip for
easy hole centering and
directional guidance.
•Short entries into double
spiral flute design for fast
dust removal.
•Multi-Cutter design
provides for vastly
reduced vibration.
•Lower operational noise
levels due to multi
carbide tip.
•Multi-Cutter design
provides for clean round
holes.
•All diameters meet
current ANSI standards.
•Shot-peened, industrial
finish.
Made in Germany.
x
USEABLE
LENGTH
TOTAL
xLENGTH
3/8”x 4x 10
3/8”x 7x 13
1/2”x 4x 10
1/2”x 7x 13
1/2”x 9-1/2x 16
1/2”x 15-1/2x 22
1/2”x 20-1/2x 27
1/2”x 30x 36
9/16”x
7x 13
9/16”x 15-1/2x 22
5/8”x 4x 10
5/8”x 7x 13
5/8”x 9-1/2x 16
5/8”x 15-1/2x 22
5/8”x 20-1/2x 27
5/8”x 30x 36
11/16”x 9-1/2x 16
3/4”x 4x 10
3/4”x 7x 13
3/4”x 9-1/2x 16
3/4”x 15-1/2x 22
3/4”x 20-1/2x 27
3/4”x
30 x
36
7/8”x 7x 13
7/8”x 9-1/2x 16
7/8”x 15-1/2x 22
7/8”x 30x 36
1”x 9-1/2x 16
1”x 15-1/2x 22
1”x 30x36
1-1/8”x
9-1/2x 16
1-1/8”x 15-1/2x 22
1-1/8”x
30x 36
1-1/4”x 9-1/2x 16
1-1/4”x 15-1/2x 22
1-1/4”x
30x 36
1-3/8”x
9-1/2x 16
1-3/8”x 15-1/2x 22
1-3/8”x
30x 36
1-1/2”x
9-1/2x 16
1-1/2”x 15-1/2x 22
1-3/4”x
17x22-1/2
2”x
17x22-1/2
ER382
WACKER
EHB 7
EHB11BLS
single cutter
MULTI-CUTTER
bionic®
AE-050-131
AE-055-218
AE-060-132
AE-065-219
AE-070-133
AE-075-217
AE-080-134
AE-085-301
AE-090-220 H
AE-095-221 H
AE-305-136
AE-315-222
AE-325-137
AE-335-212
AE-345-138
AE-355-228
AE-365-139
AE-375-180
AE-385-223
AE-395-140
AE-405-141
AE-415-142
AE-425-229
AE-445-225
AE-455-143
AE-465-144
AE-475-230
AE-505-145
AE-515-146
AE-525-231
AE-535-147
AE-545-148
AE-551-302 H
AE-560-149
AE-570-150
AE-580-232 H
AE-590-151
AE-600-152
AE-610-233 H
AE-620-227 H
AE-630-153
AE-660-245
AE-680-265
H While Quantities Last
8
DrilTec |
Performance in Concrete and Stone
Quick Change - Carbide Tipped Drill Bits
TCC005-005
Hex quick change
5-Pack Assorted
Design:
• ANSI carbide tip diameters
• 1/4" hex bit drive
• High temperature brazing 1,120º C
• Milled flute - for optimized dust removal
• Asymetric spiral shape
• Straight flute entry
• Grey surface blast
• Made in Germany
Diameter
x
Useable
Length
x
Total
Length
1/8"
x
1-1/2"
x
3"
5/32"
x
1-3/4"
x
3-1/2"
3/16"
x
2"
x
3-7/8"
1/4"
x
2-1/2"
x
4"
5/16"
x
2-3/4"
x
4-3/4"
PART #
DESCRIPTION
TCC005-188
HEX QUICK CHANGE BIT 3/16" – 5 PACK
TCC005-250
HEX QUICK CHANGE BIT 1/4" – 5 PACK
TCC025-188
HEX QUICK CHANGE BIT 3/16" – 25 PACK
TCC025-250
HEX QUICK CHANGE BIT 1/4" – 25 PACK
application:
• Concrete, Masonry, Brick
• Wood
• Acrylics
• Soft Tile
Snap-lock adapter
SDS-Plus
ADAPTER
SDS-Max / spline
shank ADAPTER
DESCRIPTION
PART #
DESCRIPTION
PART #
SPLINE SHANK
AH-222-222
SPLINE to SDS-MAX BITS
AH-223-223
SDS-Top
AH-222-225
SDS-MAX to SPLINE BITS
AH-231-231
SDS-Max
AH-230-230
For drilling small diameter
holes with SDS-Plus drill
bits. Maximize use range
of large capacity Rotary
Hammers.
For using Spline Shank
drill bits in SDS-Max
Rotary Hammers and visa
versa. Optimize usage of
drill bit inventory.
Shown: AH-222-222
Performance in Concrete and Stone | DrilTec
9
straight shank drill bits
Heavy DUTY STRAIGHT SHANK
DIAM. x
TOTAL LENGTH
SHANK
PART NUMBER
1/8 x 2-1/2
1/8”
AS-003-003
1/8 x 6
1/8”
AS-003-009
5/32 x 6
5/32”
AS-004-009
3/16 x 3-1/2
3/16”
AS-006-006
3/16 x 6
3/16”
AS-009-009
7/32 x 6
7/32”
AS-011-015
1/4 x 4
1/4”
AS-012-012
1/4 x 6
1/4”
AS-015-015
1/4 x 13
1/4”
AS-018-018
1/4 x 18
1/4”
AS-019-019
5/16 x 4
5/16”
AS-021-021 H
5/16 x 6
5/16”
AS-024-024
5/16 x 13
5/16”
AS-027-027
3/8 x 6
3/8”
AS-030-030
3/8 x 13
3/8”
AS-033-033
3/8 x 18
3/8”
AS-036-036
3/8 x 24
3/8”
AS-039-039
1/2 x 6
3/8”
AS-042-042
• S
traight spiral flute entrance, for a
speedy dust removal to ensure fast
drilling speeds.
1/2 x 13
3/8”
AS-045-045
1/2 x 18
3/8”
AS-048-048
1/2 x 24
3/8”
AS-051-051
9/16 x 6
3/8”
AS-052-052
• Industrial finish.
5/8 x 8
3/8”
AS-056-056
5/8 x 13
3/8”
AS-057-057
5/8 x 18
3/8”
AS-058-058
3/4 x 6
1/2”
AS-060-060
3/4 x 13
1/2”
AS-063-063
7/8 x 6
1/2”
AS-066-066
7/8 x 13
1/2”
AS-069-069
1” x 6”
1/2”
AS-072-072
• Award winning performance.
• P
robably the best performing
Rotary Percussion drill bit in the
market today.
• C
hrome-nickel-molybdenum steel,
same as used in rotary hammer
bits.
• Tungsten Carbide tips.
• U
nique carbide tip angle, for
highest drilling speeds and
durability.
• C
opper-silver brazing joints, for
ultimate caribde tip embedment.
• D
rill bit diameters meet ANSI
Standards.
Made in Germany.
H While Quantities Last
metric STRAIGHT SHANK
10
DrilTec |
DIAM. x
TOTAL LENGTH (in mm)
SHANK
(in mm)
PART NUMBER
4 x 85
4
MA-004-085
5 x 85
5
MA-005-085
5 x 150
5
MA-005-150
6 x 100
5
MA-006-100
6 x 150
5
MA-006-150
8 x 150
8
MA-008-150
8 x 200
8
MA-008-200
10 x 200
10
MA-010-200
12 x 150
10
MA-012-150
14 x 200
10
MA-014-200
Performance in Concrete and Stone
SC Multi-purpose drill bits
• Titanium Carbide Tip
• Special Cutting Edge Geometry
• Diamond-Ground Cutting Surface
• Made in Germany.
SC Drill Bits, suitable to drill almost any material.
PART NUMBER
DIAMETER
TOTAL LENGTH
SC-003-015
1/8”
3”
SC-008-030
5/32”
6”
Richtwerte für den Universalbohrer GOLDCRAFT
SC-013-016
3/16”
3-1/2”
SC-013-030
3/16”
6”
SC-018-017
1/4”
4-1/4”
SC-018-030
1/4”
6”
SC-023-030
5/16”
6”
Hard Wood
SC-028-028
3/8”
5-1/4”
Steel,
SC-033-030
1/2”
6”
5/8”
6”
Concrete, Brick, Stone, Marble
Granite, Tile
Soft Wood
Cast Iron
Plastic,
SC-038-030
SCC-005-005
Glass,
Acrylic
5 pc. Set, one each: SC-003-015, SC-008-030, SC-013-016,
Crystal
SC-018-017, SC-023-030
Ceramics, Ceramic Tile
Richtwerte für den Universalbohrer GOLDCRAFT
Recommended drilling speed:
Concrete,
Brick,
Stone
Concrete, Brick,
Stone,
Marble
Drill Bit Diameter
Granite,
Marble
Granite, Tile
1/8-3/16''
Soft
Wood
Soft Wood
400
Hard
Wood
Hard Wood
600
Steel,
CastIron
Iron
Steel, Cast
800
1.000
Glass, Crystal
Glass,
Crystal
1.200
Ceramics, Ceramic
TileTile
Ceramics,
Ceramic
RPM
Plastic, Acrylic
Plastic,
Acrylic
1/4''
5/16''
3/8''
1/2''
9/16''
5/8''
1.400
1.600
Drill Bit Diameter
1/8-3/16''
1/4''
5/16''
3/8''
1/2''
1.800
9/16''
400
2.000
600
2.200
800
5/8''
2.500
1.000
1.200
PM
Performance in Concrete and Stone 1.400
| DrilTec
11
ht drill bits for drilling Tile, Marble, Porcelain, Ceramics, etc.
New!
The Polygonal shape assures:
HT Drill Bits with the
extremely hard and sharp
TSM carbide tip technology
make it possible to drill even
the hardest materials up to
scratch hardness of 9.
PART NUMBER
DIAMETER
TOTAL LENGTH
HT-005-005
1/8”
3”
HT-010-010
5/32”
4”
HT-015-015
3/16”
4”
HT-020-020
1/4”
4”
HT-025-025
5/16”
4-3/4”
HT-030-030
3/8”
4-3/4”
HT-033-033
1/2”
6”
• Titanium Tungsten TSM Carbide. 110º tip angle.
• Unmatched chuck security
• Straight flute entry.
• Virtual self-chucking
• No chuck slippage
• 1
,120º Low-stress high
temperature brazing.
• Quick bit change
• Asymmetric spiral flute.
• Optimal torsion rigidity
• Highest quality steel.
• L
ow hole/wall friction to boost
drilling performance
• Surface hardened.
Made in Germany.
• Use in Rotary mode only!
• Tile: 1200-600 rpm
• Glass: 800-400 rpm
Small diameters use higher rpm.
Large diameter use lower rpm.
• Apply high contact pressure if necessary.
• A
llow for 20 seconds cooling time between holes for longer
bit life.
• For use in all materials up to scratch hardness of 9.
12
DrilTec |
Performance in Concrete and Stone
ratio bit system
ROTARY HAMMER TUNE UP
This easy to assemble/disassemble drill bit system combined with
unmatched lifetime, durability and flexibility provides for the most
economical large bit system in the market today.
Now we provide the RATIO system with additional flexibility
having added RATIO drill bits including the popular JET-HEAD®
design for increased operator convenience and superior drilling
performance. Furthermore, new adapters to accommodate
nearly every rotary hammer in the market today have been
added, including the SDS-Top adapter for this all new
emerging mid range rotary hammer generation.
You can fine tune the RATIO bit system to virtually
all your application requirements and utmost ease of
operational preference. It all starts with the adapter
matching your rotary hammer. From here you can
connect regular RATIO drill bits to drill your anchor
holes, change to a core bit or CRUCIFORM drill
bit for drilling large diameter holes for conduit
pipe or fence post applications. Simply add an
extension if additional hole depth is required.
Nothing beats the RATIO drill bit system
when it comes to performance, system
7
flexibility and economic efficiency.
PLEASE NOTE: The RATIO
systems virtually allows for unlimited
size/ length connectivity and
combinations, we advise to
consult your rotary hammer
manual for applicable guidelines
regarding recommended
usage specifications. Do not
overload your rotary hammer.
It may cause reduced
performance or premature
tool and/or machine
wear.
1
2
3
4
5
6
8
Made in Germany.
6
10
9
11
1
2
3
4
5
6
7
8
9
10
11
12
Spline Adapter
SDS-Max Adapter
SDS-Top Adapter
SDS-Plus Adapter
Wacker Hex Adapter
11" Extension
RebarCUTTER™
Core Bit
Ratio Pilot Bit
Spiral Flute for Ratio Cruciform
Ratio Cruciform Head
Cruciform Pilot Bit
12
Performance in Concrete and Stone | DrilTec
13
Rebarcutter™
For use with SDS-Plus Rotary Hammers
Useable
DIAM.x Length
REBAR-CUTTER
DESCRIPTION
1/2” x7-1/2”
Ratio Rebar Cutter
RL-050-190
1/2”x 16”
Ratio Rebar Cutter
RL-050-420
9/16” x7-1/2”
Ratio Rebar Cutter
RL-056-190
9/16”x 16”
Ratio Rebar Cutter
RL-056-420
• Integrated ejection support
for removal of reinforcement
from drill body.
5/8” x7-1/2”
Ratio Rebar Cutter
RL-063-190
5/8”x 16”
Ratio Rebar Cutter
RL-063-420
11/16”x7-1/2”
Ratio Rebar Cutter
RL-069-190
Note: Consult with structural
design engineer/ architect before
drilling rebar!
11/16”x
• Uniquely durable and aggressive carbide tips.
• U
se with engaged hammer
action; Continuous drilling
without change of drill mode!
Made in Germany.
PART
number
16”
Ratio Rebar Cutter
RL-069-420
3/4” x7-1/2”
Ratio Rebar Cutter
RL-075-190
3/4”x 16”
Ratio Rebar Cutter
RL-075-420
7/8” x7-1/2”
Ratio Rebar Cutter
RL-088-190
7/8”x 16”
Ratio Rebar Cutter
RL-088-420
1”
x7-1/2”
Ratio Rebar Cutter
RL-100-190
1” x16”
Ratio Rebar Cutter
RL-100-420
1-1/8”x7-1/2”
Ratio Rebar Cutter
RL-113-190
1-1/8”x
16”
Ratio Rebar Cutter
RL-113-420
1-1/4”x7-1/2”
Ratio Rebar Cutter
RL-125-190
1-1/4”x
Ratio Rebar Cutter
16”
SDS Plus Adapter
RL-125-420
RA-030-030
1.Drill with regular rotary hammer drill bit until rebar is
encountered. Stop drilling. Remove drill bit. Do not clean hole,
as drill bit dust will aid in drilling rebar with RebarCutter™.
2.For drilling through rebar insert RebarCutter™ into rotary
hammer. Use rotary hammer mode. Apply firm pressure.
When finished remove RebarCutter™.
3. Continue drilling with regular rotary hammer drill bit.
SDS-PLUS ADAPTER
The use of RebarCutter™ in SDS-Max or Spline hammers voids all warranties.
14
DrilTec |
Performance in Concrete and Stone
ratio core bits
DESIGN DETAIL
ITEM
DIAMETER x
USEABLE LENGTH
PART NUMBER
CORE BITS
(Ratio-Thread)
Use with “RA” Adapter
and “RP-225-255” Pilot Bit
For deeper holes use
“RE-300-300 & RE-450450”
Extension only
ADAPTER
(Ratio-Thread)
Spline Shank
SDS-Max
SDS-Top
SDS-Plus
Wacker Hex
2"
2"
2"
2"
2"
RA-010-010
RA-020-020
RA-025-025
RA-030-030
RA-050-050 H
(with Ratio Coupler)
11” Extension
18” Extension
11"
18"
RE-300-300
RE-450-450
11/16" x 6"
RP-255-255
N/A
RT-001-001
Extension
Made in Germany.
DESCRIPTION
PILOT BIT
Ratio Core Bits Only!
COUPLER
Ratio replacements
1-1/2"x
2"
x
2-1/2"x
3"
x
3-1/2"x
3-3/4"x
4"
x
4-1/2"x
5"
x
6"
x
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
RK-150-150
RK-200-200
RK-250-250
RK-300-300
RK-350-350
RK-375-375
RK-400-400
RK-450-450
RK-500-500
RK-600-600
H While Quantities Last
Radical new design. Enhanced for increased carbide embodiment. Reduced body to drilling diameter decreases
hole wall friction. Unique new carbide composition and tip shape. Sturdy high-grade chrome molybdenum steel body.
This new core bit design will maximize drilling speed and tool life up to 30% over other systems. Integration with the
Ratio-System provides for fantastic system flexibility.
The alternating pointed chisel carbide teeth and the spade carbide teeth are designed to optimize and enhance
each other during the drilling operation. The chisel tips score and break-up the materials as well as stabilize the core
bits’ working characteristics. The spade tips further break and remove the materials. Even problems associated with
drilling re-enforced concrete are greatly reduced with this new bit design.
RATIO CORE BIT
(SHOWN WITH PILOT)
EXTENSION
Performance in Concrete and Stone ADAPTER
| DrilTec
15
ratio cruciform drill bits
ITEM
DESCRIPTION
ADAPTER
(Ratio-Thread)
Spline Shank
SDS-Max
SDS-Top
Wacker Hex
CRUCIFORM DRILL HEAD
To be used with:
“RA” Adapter and
“RP” Pilot Bits
For deeper holes:
use “RE” Extensions
and “RF” Spiral Flutes
if necessary
DIAMETER x
USEABLE LENGTH
PART
NUMBER
2"
2"
2"
2"
RA-010-010
RA-020-020
RA-025-025
RA-050-050 H
1-1/2"x 1-1/2"
1-3/4"x 1-1/2"
2"
x 1-1/2"
2-5/8"x 1-1/2"
3-1/8"x 1-1/2"
3-1/2"x 1-1/2"
Cruciform drill bits are ideal for
drilling large diameter holes without
the depth limitations of Core bits.
RC-040-040
RC-045-045
RC-052-052
RC-065-065
RC-080-080
RC-090-090
4"
x 1-1/2"
4-1/2"x 1-1/2"
5"
x 1-1/2"
6"
x 1-1/2"
RC-100-100**
RC-110-110**
RC-125-125**
RC-150-150**
**Not for use with Spiral Flute!
EXTENSIONS
With Ratio Coupler
SPIRAL FLUTE
For use with applicable Cruciform 1-1/2"x
Drill Head Diameter
1-3/4"x
2"
x
2-5/8"x
3-1/8"x
3-1/2"x
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
RF-045-157
RF-045-157
RF-052-157
RF-065-157
RF-080-157
RF-080-157
Pilot Bits
For use with Cruciform Drill Head,
5/8" x 4-3/4"
normal use.
RP-124-124
Like above, drilling deep without
flute for guide, also angle drilling 5/8" x 6-3/4"
RP-174-174
Ratio replacements
RT-001-001
COUPLER
11" long
18" long
Please note:
The Ratio System
allows for virtually
unlimited size/length
connectivity and
combinations. We advise
to consult your rotary
hammer manual regarding
recommended usage specification.
RE-300-300
RE-450-450
H While Quantities Last
One Piece Core bits
Description
Diameter x
Useable
Length
x
Total
Length
Spline
Part #
SDS-Max
Part #
1-3/4”x
3”
x
12”
CB-100-175 H
CB-300-175 H
1-3/4”x
3”
x
22”
CB-105-175 H
CB-305-175 H
2” x 3” x12”
CB-110-200 H
CB-310-200
2” x 3 x22”
CB-115-200
CB-315-200
2-3/4”x
3”
x
12”
CB-120-250 H
CB-320-250
2-3/4”x
3”
x
22”
CB-125-250
CB-325-250
3-1/4”x
3”
x
12”
CB-130-300 H
CB-330-300
3-1/4”x
3”
x
22”
CB-135-300
CB-335-300
3-1/2”x
3”
x
12”
CB-140-350 H
CB-340-350 H
3-1/2”x
3”
x
22”
CB-145-350
CB-345-350
4” x 3” x12”
CB-150-400 H
CB-350-400 H
4” x 3” x22”
CB-155-400
CB-355-400
4-1/2”x
22”
CB-165-450
CB-365-450
5” x 3” x22”
CB-175-500
CB-375-500
6” x 3” x22”
CB-185-600
CB-385-600
Replacement Pilot Bit
CB-985-900
CB-985-900
3”
x
H While Quantities Last
16
DrilTec |
NEW CORE BIT DESIGN
Radical new design. Enhanced for increased
carbide embodiment. Reduced body to drilling
diameter decreases hole wall friction. Unique
new carbide composition and tip shape. Sturdy
high grade chrome molybdenum steel body. This
new core bit design will maximize drilling speed
and tool life up to 30% over other sytems.
The alternating pointed chisel carbide teeth
and the spade carbide teeth are designed to
optimize and enhance each other during the
drilling operation. The chisel tips score and
break up the materials as well as stabilize the
core bits’ working characteristics. The spade
tips further break and remove the materials.
Even allows for drilling reinforced concrete. Use
RebarCutter™ for smaller diameters. See
page 14 for details.
Made in Germany.
Performance in Concrete and Stone
TAPCON® TOOLS
Ideal for drilling and fastening with just one power tool.
INSTALLATION KIT
DESCRIPTION
PART NUMBER
TAPCON KIT (COMPLETE W. BELOW)
TP-001-001
1/4 MAGNETIC DRIVER
TP-003-003
5/16 MAGNETIC DRIVER
TP-006-006
PHILLIPS BIT ADAPTER
TP-009-009
DRILL BIT HOLDER
TP-012-012
SLEEVE
TP-015-015
1/8 HEX KEY
TP-018-018
# 2 PHILLIPS BIT
TP-021-021
# 3 PHILLIPS BIT
TP-024-024
CASE (ONLY)
TP-000-000
TAPCON® STRAIGHT SHANK BITS
•Sturdy and complete set of tools for concrete screw
installation. Tapcon and others.
DIAM. x TOTAL LENGTH
PART NUMBER
PACK QTY.
5/32 x 3-1/2
TA-010-001
10
5/32 x 4-1/2
TA-020-002
10
5/32 x 5-1/2
TA-030-003
10
•Use Straight Shank bits with drill bit holder for use in
drills with Jacobs-Style chucks.
3/16 x 3-1/2
TA-040-004
10
3/16 x 4-1/2
TA-050-005
10
•SDS-Plus bits fit directly into SDS-Plus Rotary
Hammers. Sleeve will tightly fit over hex on drill bit.
3/16 x 5-1/2
TA-060-006
10
•Check with screw manufacturers manual for proper
screw installation.
•
Drill bits are sold seperately.
TAPCON® SDS-Plus HEX BITS
DIAM. x USE/TOTAL LENGTH
PART NUMBER
5/32 x 3 x 6
TS-002-002
5/32 x 4 x 7
TS-003-003
3/16 x 3 x 6
TS-005-005
3/16 x 4 x 7
TS-006-006
® Tapcon is a registered trademark of ITW Buildex.
Performance in Concrete and Stone | DrilTec
17
chisel advantage
MEASURABLE CHISEL QUALITY
Finest workmanship combined with the most modern forging technology are put to work in the manufacture of DRILTEC chisels.
CNC machines and robot-aided workstations support manufacturing processes.
DRILTEC chisel quality is “produced” with “in-process-quality-assurance” throughout the manufacturing cycle. Raw material and
material composition verficiations, hardening-, form- and dimensional checks are all part of this “in-process-quality-assurance”
program. ISO certification of the manufacturing plant is further evidence of this quality assurance package.
Crosscuts to check hardening depth.
Checking for hairline cracks.
Hardness control.
Special tool control for blade hardness.
Surface hardness control.
3/4" hex chisels
bosch
dewalt
hitachi
makita
milwaukee
wacker
11301
5021K
H55SC
HM1211B
5335
EH9BL
11302
25941K
5337
EHB10
11305
DW558K
11317
Bull Point
Flat Chisel
2" Wide Chisel
DESCRIPTION
PART #
12" BULL POINT
AG-400-400
12" FLAT
AG-406-406
2" X 12" WIDE
AG-412-412
3" X 12" WIDE
AG-418-418
CLAY SPADE
4" x 5" x 16"
AG-420-420 H
FLOOR SCRAPER
6" x 5"
AG-310-340
FLOOR SCRAPER ADAPTER
14" x 16"
AG-441-441 H
BUSHING TOOL
AG-450-450
3" Wide Chisel
Floor Scraper
Floor Scraper Adapter
Bushing Tool
H While Quantities Last
18
DrilTec |
Performance in Concrete and Stone
electric hammer chisels
DRILTEC ELECTRIC HAMMER CHISEL’S SIMPLY THE BEST! HERE’S WHY:
•Manufactured from highest grade chrome, nickel,
molybdenum steel.
•Forged points (no grinding)
provide for an even horizontal
grain structure, resulting in much
longer tool service life.
•CNC machined tool connectors for tied tool fit. For
benefit of tool and increased performance.
•Case hardened with shot peened surface treatment
to prevent premature fatigue failure.
1-1/8" x 6" hex chisels
B&D
5027
bosch
DEWALT
hilti
Brute
D25980K
TE-3000
hitachi
kango
Makita
MILWAUKEE
H65
2500
HM1303/04B
5338
11304
H85
11335
H90
HM1317CB
wacker
EH27
BH23
HM1500
2760
HM1800/10
Moil Point
3" Flat Chisel
Asphalt Cutter
DESCRIPTION
PART #
20” MOIL POINT
AG-705-705
20” FLAT CHISEL
AG-715-715
3” FLAT CHISEL
AG-725-725
5-1/2” x 6” CLAY SPADE
AG-745-745 H
4-1/2” x 5” ASPHALT CUTTER
AG-735-735
Flat Chisel
Clay Spade
H While Quantities Last
SDS-TOP chisels
Bull Point
Flat Chisel
Wide Chisel
HILTI
TE35, TE40*, TE46
*Use with TE-T Connector
DESCRIPTION
PART #
BULLPOINT 11”
AG-003-003
FLAT CHISEL 11”
AG-006-006
WIDE CHISEL 1-1/2” x 10”
AG-009-009
Performance in Concrete and Stone | DrilTec
19
spline chisels
AEG
B&D
BOSCH
DEWALT
HITACHI
KANGO
MAKITA
METABO
MILWAUKEE
RAMSET
RYOBI
PH38
5041, 5042
11202, 11203
530K
DH38YE
430 S, 501 S
HM0810B
RH66, RH99
5309, 5316
442, 445
ED382
PHD26
5043, 5044
11204, 11205
531K
DH40FA
637 S, 750 S
HM1242C
1129, 1130
5317, 5318
475
ER382
PHD38
5045, 5059
11209, 11214
532K
DH40FB
950S
HR3851
6030, 6040
5319, 5321
REDHEAD
978 S
HR4040C
6046
5327, 5334
747-2
5093, 5095
11219, 11220
533K
DH5OSB
5096, 5098
11232, 11233
551K
DH65
HR5000
EHB 7S
EHB 11BLS
11244E, 11247
H45FR
5341, 5343
11248, 11306
H45SB
5344, 5345
11307, 11310
5347, 5348
11314, 11387
5352, 5353
Bull Point
Flat Chisel
Scaling Chisel
Slotting Tool
Clay Spade
Asphalt Cutter
Floor Scraper
WACKER
5336, 5340
DESCRIPTION
PART #
BULLPOINT 12”
AG-110-192
BULLPOINT 16”
AG-115-193
FLAT CHISEL 12”
AG-120-190
FLAT CHISEL 16”
AG-125-191
SCALING CHISEL 2” x 12”
AG-130-195
SCALING CHISEL 3” x 12”
AG-135-198
SLOTTING TOOL 1-1/2” x 12”
AG-140-209
CLAY SPADE 4” x 5” x 19”
AG-145-215
ASPHALT CUTTER 5” x 5” x 19”
AG-150-220
FLOOR SCRAPER 6” x 5”
AG-310-340
FLOOR SCRAPER ADAPTER 14” x 16”
AG-165-341
GROUND ROD DRIVER 5/8” x 10”
AG-155-231
GROUND ROD DRIVER 3/4” x 10”
AG-160-232
BUSHING TOOL 1-3/4” x 1-3/4” x 9”
AG-170-350
BUSHING TOOL CARBIDE
AG-175-351 H
Floor Scraper Adapter
Ground Rod Driver
Bushing Tool
H While Quantities Last
Bushing Tool, Carbide
20
DrilTec |
Performance in Concrete and Stone
SDS-Plus chisels
AEG
B&D
BOSCH
Dewalt
HILTI
HITACHI
KANGO
MAKITA
APH14, PH210
5009, 5013
PHE16, PHE19
5014, 5016
PHE20, PHE24
5053, 5054
PHE26
5056, 5057
MILWAUKEE
METABO
RAMSET
11207, 11210
514K, 523K
TE 6C
DH22
200, 285
BHR241, HR160, HR1821
11211, 11212
557K, 566K
TE 6S
DH24
327, 422
HR2000, HR2010
2605, 5263
6010, 6018
425
5302, 5303
6020, 6024
11213, 11215
567K, 570K
TE 7
DH30PV
426, 430D
HR2400, HR2410
5312, 5320
6026
redhead
555, 715
11221, 11222
25103, 25201
TE 15C
VR16
HR2420, HR2432
5324, 5359
KHE24
11224, 11228
25203, 25303
TE 16
VRT22
HR2450, HR2455
5360, 5363
KHE28
Fein
11236, 11253
25304, 25113
TE 24, 25
HR2475, HR2511M
5369, V28
KHE32
ryobi
642
11255, 11320
25313
TE 40*
HR2811F , HR3000C
Porter cable
UHE22
ED160
6372
RH228VC
TE 104
HR3210C, BRH240
639
UHE28
ED211
Please note: hammers with no rotation stop require adapter!*Use with TE-C Connector
Power Point
Bull Point
Power Chisel
DESCRIPTION
PART #
POWER POINT 6-1/4"
AG-600-600
BULLPOINT 10"
AG-603-603
POWER CHISEL 6-1/4"
AG-604-604
FLAT CHISEL 10"
AG-606-606
WIDE CHISEL 1-1/2" x 10"
AG-609-609
BENT CHISEL 1-1/2" X 10"
AG-610-610
SCALING CHISEL 4" x 9"
AG-615-395
NEW
SCRAPER ASSEMBLY 4" x 11"
AG-650-040
NEW
SCRAPER ASSEMBLY 8" x 11"
AG-650-080
NEW
BUSHING TOOL Carbide Tipped
AG-690-371
Flat Chisel
Bent Chisel
Wide Chisel
Scaling Chisel
4" Scraper
Assembly
8" Scraper
Assembly
Bushing Tool
Performance in Concrete and Stone | DrilTec
21
sds-max chisel
B&D
BOSCH
dewalt
HILTI
Hitachi
5097
11214 EVS, 11216
541K, 545K
TE-F 52, 60
DH40MA
5099
11223, 11227
25600K
TE-F 72, 92
DH40MB
11230, 11231
25900K
TE-Y 54, 55, 56
DH50MB
11235, 11240
2570K
TE-y 74, 75
11241, 11245
25899K
TE 76, 80
11263, 11309
25901k
TE-Y 504, 505
11311, 11312
25941k
TE-Y 704, 705, 706
11313, 11316
25602K
TE-Y 70
11318, 11388
25651K
11264
25712K
metabo
milwalkee
HM1100C
6045
5308
EHB-7SM
HM1202C
mhe56
5313
EHB11BLM
HR4000C
khe76
5314
EH9BLM
H45MA
HR4001C
khe96
H60MB
HR4010C
5327
DH40HR
HR4500C
5346
H45MR
HR5001C
5336
H60MR
HR1214C
5339
TE700AVR
Hr4510c
5342
TE500
hr5210c
25762K
makita
WACKER
5315
hr4002
Bull Point
Flat Chisel
DESCRIPTION
PART #
BULLPOINT 11"
AG-230-203
BULLPOINT 16"
AG-235-204
FLAT CHISEL 11"
AG-240-205
FLAT CHISEL 16"
AG-245-206
SCALING CHISEL 2" x 12"
AG-250-210
SCALING CHISEL 2" x 16"
AG-255-207
SCALING CHISEL 3" x 12"
AG-260-208
BENt CHISEL 3" X 12"
AG-261-211
SLOTTING TOOL 1-1/4" x 12"
AG-265-209
CLAY SPADE 4-1/2" x 5" x 19"
AG-270-215
POINTED SPADE 5" X 21"
AG-271-218
ASPHALT CUTTER 5" x 5" x 19"
AG-275-220
FLOOR SCRAPER 6" x 5"
AG-310-340
FLOOR SCRAPER ADAPTER 14" x 16"
AG-285-341
GROUND ROD DRIVER 5/8" x 10"
AG-280-231
GROUND ROD DRIVER 3/4" x 10"
AG-280-232
GROUND ROD DRIVER 1-3/8" x 10"
AG-280-375
BUSHING TOOL 1-3/4" x 1-3/4" x 9"
AG-290-370
BUSHING TOOL CARBIDE
AG-290-371
Scaling Chisel
Bent Chisel
Slotting Tool
Clay Spade
Pointed Spade
Asphalt Cutter
Floor Scraper
Floor Scraper Adapter
Ground Rod Driver
NEW
Bushing Tool
Bushing Tool, Carbide
22
DrilTec |
Performance in Concrete and Stone
Tungsten carbide tipped
saw blades
These fine tungsten carbide tipped saw
blades have Roll-Hardened steel body
and 0.090 thin kerf. Carbide tipped teeth
are alternate top bevel grind. Arbor is
5/8” and have diamond knockout with
7-1/4” blades.
S U P E R FA S T, S M OOT H C U T S
7 ⁄4
1
CAUTION: Refer to your power tool
manual for proper use and installation.
Improper use and or installation may
result in bodily injury.
Rip/Cross Cut - Wood
Alternating Top Bevel
Carbide Tipped
Fits 5/8" Arbor Saws
Kerf .070 - .074
Body .05
24 Teeth
Red Cheetah
MAX RPM 8,400
NOT OPERATE SAW MACHINE WITHOUT PROPER SAW
WARNING DO
BLADE GUARD IN PLACE. OTHER IMPORTANT INSTRUC-
D
IR
EC
N
TIONS AND WARNINGS REGARDING YOUR SAFETY ARE CONTAINED IN
SAW MACHINES OWNERS MANUAL. WEAR EYE AND RESPIRATORY
PROTECTION. FAILURE TO HEED THESE INSTRUCTIONS
AND WARNINGS COULD RESULT IN SERIOUS BODILY INJURY
TIO
N OF RO
TI
TA
O
Ultra Thin Red
Cheetah Saw Blade
7 ⁄4
1
Rip/Cross Cut - Wood
Alternating Top Bevel
Carbide Tipped
Fits 5/8" Arbor Saws
Kerf 0.090
MAX RPM 7,500
NOT OPERATE SAW MACHINE WITHOUT PROPER SAW
WARNING DO
BLADE GUARD IN PLACE. OTHER IMPORTANT INSTRUCTIONS AND WARNINGS REGARDING YOUR SAFETY ARE CONTAINED IN
SAW MACHINES OWNERS MANUAL. WEAR EYE PROTECTION. FAILURE
TO HEED THESE INSTRUCTIONS AND WARNINGS COULD
RESULT IN SERIOUS BODILY INJURY
D
IR
EC
TIO
N OF ROT
I
AT
O
N
TUNGSTEN CARBIDE TIPPED
saw blades
DESCRIPTION
DIAM. x TEETH
PART
NUMBER
BULK
PACK
7-1/4” x 20
UC-200-720
25
7-1/4” x 24
UC-210-724
25
7-1/4” x 24
UC-220-724
25
7-1/4” x 40
UC-230-740
25
Performance in Concrete and Stone ULTRA THIN KERF
| DrilTec
23
P.O. Box 1740
Ridgeland, MS 39158
driltec.com
Catalog #23-2013
helleranchorbore.com