EC-C900S-USB
USER Manual
Demo Software Instruction
This manual is applicable to use this product for the first-time user, if there is any
updated version without prior notice. The manual will be subject to the latest version
of the company.
Welcome to use our products EC-C900S, please read this manual carefully before
using, in order to better use.
1.
Pictures
2.
Technical Specification
1
2
Interface: USB
Size: 150mm(L)X50mm(W)X53mm(H)
Weight: 950g
Color: Black
Power supply: 5V
Build-in Battery Capacity: 600mAh
Operation temperature: -10℃ ~ 55 ℃
Operating humidity: 10%~85% relative humidity
Storage temperature: -30℃~70℃
Store humidity: 10%~90% relative humidity
Tracks: 1/2/3 track
Recording density: 1,3 track
210BPI
2 track
75/210BPI optional
Operating speed: Read speed
6.3~250cm/s
Write speed
10~100cm/s
Card thickness: PVC 0.76±0.08mm
Error rate: Read < 0.5%、Writer < 0.8%
Head life: About 1,000,000 times
Coercive force: Read/Write 300-4000 oe Mag card
Systems: Windows 98 / XP/WISTA/Windows 7
Rating: CE, FCC,ROHS
3. Packing
A ZCS100- IC, a CD, Clean card
4. Application
It is widely used in the banking system, fiscal system, safety management system,
member management system and related applications.
5. Software Instructions
Open the disc into the drive, you can see the icon
, it is the equipment
demonstration software, then Plug USB port into PC(Computer),final Open the
software interface, Click“ Confirm “,then you can use it easy as follow Picture( Note:
if Connect successfully , you will see the Message“ **READY“ on the Left Corner)
2 / 13
3
( Note: if the Operating interface showed” ” no Connect ”, Please Pull the Plug and
USB,
then install them again)
● Swipe cards, make sure the magnetic stripe side of card should be the same as
follow picture
3 / 13
4
1, Lo/Hi-Co magnetic cards
Open the Software, you will see the ‘Lo/-Co” or “Hi-Co “Button, writing the magnetic
cards, make sure the“Hi-co magnetic card” should be the chosen “Hi-Co”, “Lo-Co
magnetic cards” should be chosen “Lo-Co”
2. Open/Close Beep Sound
This Button can be controlled the Buzzer Valid or Invalid, you can choose it according
yourself
requirement.
4 / 13
5
3. “Read” magnetic cards
confirm whether the Magnetic cards have any data into the magnetic cards or not,
Please Click”
Read” Button
, and “Read” indicator light will be lighted, then swipe the
cards, the data of the magnetic cards will be showed on the Followed Dialog Box,
4. “Copy’’ Magnetic cards
Copy one card data into another Blank magnetic cards, Please Click “Copy”
Button
Swipe the data cards first, then swipe the copy cards again, it’ll be showed
, if swipe cards successfully, both of them (two cards data)
will be the same exactly. If not, please try again
5 / 13
6
5. “Write” Magnetic cards
Input the needed data into the relevant Track (1&2&3) then Click “
”,
write the magnetic cards
later, if showed swipe wrong, please check the “Hi-co” or “Lo-co”
Button
setting correct or not and the input data should be
according to ISO standard or other,if Swipe correct, the top left will be
showed
6 / 13
7
6. “Compare” Magnetic Cards
Comparing both of cards data are in harmony with each other or not, Please Click
“
” Button, then showed
,Swipe the needed
compare cards again, if the Message Box showed follow Message (the compare cards
successfully)
7 / 13
8
7. “Erase” Magnetic cards
If you don’t need any data of the magnetic cards, Please choose “Erase” the data of
cards
.then Pop-Up Windows
Track message required, Click “Ok”, if showed the picture
Erase cards successfully
,please erase each
, that mean
8 / 13
9
8. “From File” to write card
If Data doesn’t need edited by Yourself. You can get them from the Computer Files
(data files), Click “
”,Open the Dialog Box
,
Choose the files you needed, then swipe card later. As followed picture:
9 / 13
10
9. Sequential write cards
According to your need to Click “
” , Pop-up the Dialogue Box
,
Choose the track you need to Sequential write. Then swipe cards. the data will be
written into the cards sequential.
10 / 13
11
10. Read cards save “to files”
Save data to file, Please Click “
” Button, Pop-Up the Dialogue box
, Double-Click the file (you need to save the file, then swipe
cards. The data will be saved into the file automatic.
11 / 13
12
Open the saved file, you will see the data. As follow picture:
11. Setting
Setting the relevant parameters according your required
12. Change the Log in ID and Password
Change another New Password, it can avoid somebody to change your data,so that
you can
protect the relevant important information
12 / 13
13
6. Maintenance
The Magnetic Stripe Card Reader/Writer is a advanced high-tech products, Please
take care of it
carefully, Long-time usage, if come across the followed problems, we can take some
measures:
1: Some Magnetic Powder on the surface of the magnetic head, Read/Write card
success rate declines
Use the Cleaning card to clean the magnetic head several times.
2: Application program can’t connect with Magnetic Swipe Reader/Writer
Communication not correct, Check the data cable is broken or not and confirm the
parameters
setting; Checking the USB Driver is broken or not, re-install the Driver again. Checking
the USB Port whether connect successfully or not; Checking the External Power
Supply is normal or not
13 / 13
">