Crary | 74824 | 13cmCApACity Chipper/Shredder/Blower

TABLE OF CONTENTS
Horsepower Conversion Chart.............................................3
Who Uses What..........................................................................4
Frequently Asked Questions.............................................5-8
Product Noise Levels................................................................9
Disc Specs................................................................................. 10
Chipper/Shredders
5cm – Model SC2170XE....................................................... 11
8cm – Models SC3206XE & SC3265XE
SC3305XE & SC3342XE......................................12-13
PTO MACHINES
11cm – Model CH45540XE.................................................. 24
13cm – Models CH5540HXE & CH5540XE..................... 25
13cm – Model – SC5540BXE
Chipper/Shredder/Blower................................. 26
20cm – Model – CH8540XE................................................. 27
23cm – Models – CH9540HXE & CHF9540HXE.....28-29
Skid Steer Chippers
11cm – Models CH450HXE................................................. 30
Chipper/Shredder Blower
13cm – Model SC5720BXE.................................................. 14
Wheeled vacuums
Models – WV190, WV190S................................................... 31
Stump Grinder
Model SG340............................................................................ 15
DEBRIS LOADERS
Models – DL8390 & DL10570............................................. 32
Models – DL12653 & DL12720........................................... 33
CHIPPERS
10cm – Model CH4400XE.................................................... 16
10cm – Model CH5653XE.................................................... 17
15cm – Models CH611DHXE & CH6730HXE...........18-19
20cm – Turntable Models CH8720iHXE &
CH8993HXE.......................................................20-21
23cm – Models CH911DHXE & CH922DHXE..........22-23
Warranty / Product Charts
Warranty Coverage – Current Models.......................36-37
Warranty Coverage – Non-Current Models.............38-39
Belts Reference Guide........................................................... 40
Rotor, Shredder/Chipper Replacement Kits.................. 41
Blade Kits Chart.................................................................42-43
Accessories
Photos and Part Numbers.............................................44-50
2
www.bearcatproducts.com
CONVERSION CHART
Horsepower to cc Conversion Chart
GASOLINE ENGINES
Engine Manufacturer
Engine Type
cc
hp
kW
Model Number
Subaru
Horizontal
169
5.7
4.25
SC2170
Briggs & Stratton
Vertical-Intek
190
6**
4.74
WV190, WV190S
Briggs & Stratton
Horizontal
205
5.5**
4.10
SC3206XE, SC2206XE
Subaru
Horizontal
265
9
6.71
SC3265XE
Briggs & Stratton
Horizontal
305
8**
5.97
SC3305XE
Honda
Vertical-GXV
340
8.9
6.64
SG340
Briggs & Stratton
Horizontal-Intek
342
11**
8.20
SC3342XE
Subaru
Horizontal
404
14
10.44
CH4400XE
Subaru
Horizontal/Elec.
653
22
16.41
CH5653XE, DL12653
Subaru
Horizontal/Elec./Fuel Injected
720
28
20.88
CH8720iHXE
Subaru
Horizontal/Elec.
720
25
18.64
DL12720, SC5720BXE
Briggs & Stratton
Horizontal/Elec.-Vanguard
993
35
26.10
CH8993HXE
**Horsepower rating based on Engine Manufacturer at time of manufacture
DIESEL ENGINES
Engine Manufacturer
Engine Type
Liters
hp
kW
1105/Mech.
1.1
28
20.88
CH611DHXE
Kubota
1105/Mech.
1.1
28
20.88
CH911DHXE
Kubota
2203/Mech.
2.2
50
37.28
CH922DHXE
Kubota
011 + 1 + 701.282.5520
Model Number
3
WHO USES WHAT
ECHO Bear Cat has a wide-range of products to get the job done!
Industry
Product
Chipper/Shredder
Ag - Specialty
Cemetery
Farming
Used for
Home Owner
with Acreage
Used for
Chipper
Shred bales for
stables
Chipper/Shredder
Landscaper
Job site clean up
Job site clean up
Create mulch
Wheeled Vacuum
Stable clean up
Wheeled Vacuum
Leaf removal
Chipper/Shredder
Brush and tree
pruning
Debris Loaders
Leaf clean up
Wheeled Vacuum
Leaf removal
Chipper
Chipper
Grounds and
Maintenance
Product
Tobacco stalks
Chipper/Shredder
Chipper/Shredder
Brush/hedge clean
up
Wheeled Vacuum
Parking lots and
stadium clean up
Debris Loader
Collecting grass
clippings and leaf
removal
Palm frawn
disposal
Wheeled Vacuum
Debris Loader
City park clean up
Street clean up
Leaf pick up
Tree thinning
Nurseries
Parks and Rec
Chipper/Shredders
Dead plant
recycling/moisture
control
Chipper/Shredder
Trail maintenance
Property
maintenance
clean up
Chipper
Wheeled Vacuum
Yard maintenance
Pruning
Leaf removal
Storm damage
Municipalities
Create mulch for
landscaping
Grass clipping tidy
Wheeled Vacuum
Chipper
Disposal of broken
branches and
fallen trees
Wheeled Vacuum
Chipper/Shredders
Christmas tree
disposal
Shelter belt clean
out
Field obstructions
Golf Course
Industry
Chipper/Shredders
Rental
Wheeled Vacuum
Parking lot
clean up
Composting/home
owner clean up
Leaf removal
Refuse reduction
Tree Service
Chipper
Air quality
protection
Power line clearing
Easements clearing
4
www.bearcatproducts.com
FAQ
CHIPPER/SHREDDERS
MODELS: SC2170, SC3206XE, SC3265XE, SC3305XE, SC3342XE, SC5540BXE & SC5720BXE
What are these machines designed for?
The ECHO Bear Cat chipper/shredders are designed to effectively reduce the volume of wood, leaves and other organic
material.
When should I chip?
If you don’t plan on recycling the material, use the chipper. Also use the chipper if the material is green and stringy.
When should I shred?
If you plan on using the material for compost use the shredder. Shredding is an efficient way to reduce the volume of leaves or prunings
that are less than 2cm in diameter.
How long will the chipper blades last?
Depending on the type, age and cleanliness of the wood being chipped, chipper blades will require sharpening after 5-15 hours of use. Dry,
dirty wood will dull the blades faster.
How big of a branch will these machines chip?
The ECHO Bear Cat 5cm chipper/shredder will chip a branch or bundle of branches up to 5cm in diameter.
The ECHO Bear Cat 7.6cm chipper/shredder will chip a branch or bundle of branches up to 7.6cm in diameter.
The ECHO Bear Cat 12.7cm chipper/shredder will chip a branch or bundle of branches up to 12.7cm in diameter.
STUMP GRINDER
MODEL: SG340
What is the application of the Stump Grinder?
The ECHO Bear Cat Stump Grinder is designed to be used on small to medium stumps found in places large stump grinders cannot get to.
How do I engage the Stump Grinder?
The ECHO Bear Cat Stump Grinder has a double belt drive from the engine to the cutter head. With engine running, place the cutting teeth
carefully over the stump while keeping the bottom bail in the up position. Pull the top bail to the handle and hold it there to activate the
left wheel brake.
How difficult is it to perform maintenance on the machine?
ECHO Bear Cat understands that proper maintenance is vital. We have designed the machine for ease of maintenance. The carbide blades
must be sharpened regularly. Check for dullness every eight hours of operating time or when it becomes noticeably harder to push the
stump grinder into the stumps.
011 + 1 + 701.282.5520
5
FAQ
CHIPPERS
MODELS: CH4400XE, CH45540XE, CH5653XE, CH5540XE, CH5540HXE, CH611DHXE, CH6730HXE,
CH8540XE, CH8993HXE, CH8720iHXE, CH9540HXE, CHF9540HXE, CH911DHXE & CH922DHXE
What are these machines designed for?
The ECHO Bear Cat chipper is designed to effectively reduce the volume of wood, branches and other organic material.
The typical application for this product group is anywhere from light commercial to municipalities and/or rental.
When should I rent instead of buying a chipper?
Rent the machine if you have a very limited or unique job.
What types of chippers are available?
ECHO Bear Cat makes chippers with gravity or hydraulic feed, powered by an engine package or a tractor PTO. A hydraulic feed machine has
a hydraulic driven feed roller to efficiently feed branches to the chipper disc.
When should I buy a gravity feed machine?
If you have an infrequent need for a chipper and time is not a factor, a gravity feed machine will fit your needs well.
When should I buy a hydraulic feed machine?
If time or efficiency is an issue, a hydraulic feed chipper allows you to be more productive.
How long will the chipper blades last?
Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5 and 15 hours.
Dry, dirty wood will dull the blades faster. Hydraulic feed machines will have longer blade life.
How difficult is it to perform maintenance on the machine?
Proper maintenance is vital. Routine maintenance, including chipper blades, will normally take only 10 minutes.
POWER TAKE OFF (PTO) MACHINES
MODELS: CH45540XE, CH5540XE, CH5540HXE, SC5540BXE, CH8540XE, CH9540HXE & CHF9540HXE
When do I buy a chipper powered by a tractor Power Take Off (PTO) vs. an engine-driven unit?
If you own a tractor and you are bringing the material to a collection site, a PTO chipper is a smart economic choice.
When should I rent instead of buying a chipper?
Rent the machine if you have a very limited or unique job.
What are the tractor requirements for these chippers and chipper/shredders?
The ECHO Bear Cat 11.4cm chipper requires a tractor with PTO hp ranging from 15hp to 28hp. The ECHO Bear Cat 12.7cm (5 inch) chippers
and chipper/shredders require a tractor with PTO hp ranging from 25hp to 45hp. The ECHO Bear Cat 20.3cm (8 inch) and 22.9cm (9 inch)
chippers require a tractor with PTO hp ranging from 35hp to 60hp.
Will the chipper fit my tractor? The ECHO Bear Cat chippers and chipper/shredders are designed to fit all Category 1
three-point hitches. Chipper weight and tractor hp needs to be taken into consideration.
When should I buy a gravity feed machine? If you have an infrequent need for a chipper and time is not a factor, a gravity feed
machine will fit your needs well.
6
www.bearcatproducts.com
FAQ
DEBRIS LOADERS
MODELS: DL8390, DL10570, DL12653 & DL12720
What is the application for the Debris Loader?
The Debris Loader is used for commercial or municipal pickup of leaves, grass or other light debris.
How much reduction of debris will I get?
There is very limited reduction of the material due to the design for compaction vs. reduction. The Debris Loader is designed to effectively
load leaves, grass or other light debris from the ground to a vehicle collection bin.
Is there a rental application for this machine?
Yes. Commercial landscapers and yard care people will have a seasonal need for this piece of equipment.
How difficult is it to perform maintenance on the machine?
ECHO Bear Cat understands that proper maintenance is vital. We have designed the machine for ease of maintenance.
WHEELED VACUUMS
MODELS: WV190 & WV190S
Where can I use the Wheeled Vacuum?
The Wheeled Vacuum is designed to be used for residential, commercial or municipal pickup of leaves, grass or other light debris.
How much reduction of debris will I get?
There is not much reduction; however, by passing through a six-bladed fan into the bag some natural breakage occurs allowing the six-bushel bag
to be completely filled. Reduction through compaction will happen.
Is it hard to push the Wheeled Vacuum on turf?
The 35.6cm x 5cm rubber tires have ball bearing hubs that allow easy movement.
How many speeds do the Self-Propelled Wheeled Vacuums have and how fast does it go?
There are three separate gears on the transmission of the Self-Propelled Wheeled Vacuum, and the speed range from 1.98 kph to 3.56 kph.
How many height adjustments does the Wheeled Vacuum have?
The Wheeled Vacuum can be adjusted into four different nozzle settings ranging from .64cm - 11.4cm to accommodate all types of terrain.
What do I use the optional 10.1cm hose kit for?
This hose kit is designed to allow vacuuming hard to reach places such as around rocks or bushes in gardens.
How difficult is it to perform maintenance on the machine?
ECHO Bear Cat understands that proper maintenance is vital. We have designed the machine for ease of maintenance.
011 + 1 + 701.282.5520
7
FAQ
SKID STEER CHIPPERS
MODELS: CH450HXE
What is this machine designed for?
The ECHO Bear Cat chipper is designed to effectively eliminate wood, brush and other organic material while using your skid steer as the
power unit.
When should I rent instead of buying a chipper?
Rent the machine if you have a very limited or unique job.
What is the capacity and hydraulic flow requirements of these machines?
The CH450HXE is capable of continuously feeding 11.4cm branches and requires at least 41.6 to 56.8 liters per minute (Lpm) on a low-flow skid
steer.
When should I buy a hydraulic feed machine?
If you have a large, consistent job to do, a hydraulic feed machine will provide better performance and greater productivity.
How long will the chipper blades last?
Depending on the type, age and cleanliness of the wood being chipped, chipper blades will require sharpening after 5-15 hours of use. Dry,
dirty wood will dull the blades faster.
How difficult is it to perform maintenance on the machine?
Proper maintenance is vital. Routine maintenance, including chipper blades, will normally take only 10 minutes.
8
www.bearcatproducts.com
PRODUCT NOISE LEVELS
Model
Description
CHIPPER/SHREDDERS
dB (pressure)
dB level
SC2170
4cm Capacity – 170cc Subaru SP
97
111
SC3206XE
7.6cm Capacity – 205cc Briggs & Stratton OHV
97
111
SC3265XE
7.6cm Capacity – 265cc Subaru EX
97
111
SC3305XE
7.6cm Capacity – 305cc Briggs & Stratton OHV
98
112
SC3342XE
7.6cm Capacity – 342cc Briggs & Stratton OHV
94
114
SC5720BXE
13cm Capacity Chipper/Shredder/Blower 720cc Subaru (Towable)
106
120
SG340
Stump Grinder, 340cc Honda
73
87
CH4400XE
11cm 404cc Subaru EX
87
107
CH5653XE
13cm Capacity – 653cc Subaru EH
92
109
CH611DHXE
15cm Capacity – 1.1 Liter Kubota Diesel with Hydralic Feed
94
111
CH6730HXE
15cm Capacity – 730cc Kohler Command Pro with Hydraulic feed
94
117
CH8720iHXE
20cm Capacity – 720cc Subaru – turntable with Hydraulic Feed
96
114
CH8993HXE
20cm Capacity – 993cc Briggs & Stratton Vanguard – Turntable with Hydraulic Feed
96
114
CH911DHXE
23cm Capacity – 1.1 Liter Diesel with Hydraulic Feed
95
112
CH922DHXE
23cm Capacity – 2.2 Liter Kubota with Hydraulic Feed
95
112
CHIPPER/SHREDDER/BLOWER
STUMPGRINDER
CHIPPERS
PTO CHIPPERS AND CHIPPER/SHREDDERS
CH45540XE
11cm Capacity – 540 PTO – 15-28 hp Input Range
87*
107
CH5540XE
13cm Capacity – 540 PTO – 25-45 hp Input Range
86*
103
CH5540HXE
13cm Capacity – 540 PTO with Hydraulic Feed – 25-45 hp Input Range
86*
103
SC5540BXE
13cm Capacity – Chipper/Shredder – PTO - 25-45 hp Input Range
99*
113
CH8540XE
20cm Capacity – 540 PTO – 35-60 hp Input Range
95*
112
CH9540HXE
23cm Capacity – 540 PTO rpm with Hydraulic Feed - 35-60 hp Input Range
95*
112
CHF9540HXE
23cm Capacity – 540 PTO with Hydraulic Feed - 35-60 hp Input Range
95*
112
WHEELED VACUUMS
WV190
190cc Briggs & Stratton OHV
84
98
WV190S
190cc Briggs & Stratton OHV - Self-Propelled
84
98
DL8390
390cc Honda GX – 20.3cm Intake
116
134
DL10570
570cc Briggs & Stratton Vanguard – 25.4cm Intake
120
138
DL12653
653cc Subaru EH – 30.5cm Intake
97
120
DL12720
720cc Subaru EH – 30.5cm Intake
99
122
DEBRIS LOADERS
*based off towable model
011 + 1 + 701.282.5520
these values were obtained using harmonized EN ISO 3744:2010
9
CHIPPER/SHREDDERS
Disc specs
35.6cm disc weighing 22.2kg fully assembled
•
•
•
•
•
•
•
2.5cm thick machined to balance cantilever designed disc turning at 2400 rpm
Models: CH4400XE, CH45540XE & CH450HXE
Standard 11.4cm x 22.9cm discharge chute. Optional discharge chute is 11.4cm square
33cm x 36.8cm feed chute
Two reversible heat-treated steel chipper blades
Four-sided cutter bar/anvil
Chipper Blade Kit: P/N: 76295-00
50.8cm disc weighing 63.5kg, 3.2cm thick machined balanced
•
•
•
•
•
•
•
•
All discs on engine driven models turn at 2000 rpms, on PTO models turn at 1675 rpms
10cm and 13cm chippers, Models CH5540XE, CH5540HXE & CH5653XE – same chipper body
All have a 15cm discharge chute rotating 360 degrees
All have a 14cm x 17.8cm feed opening
All have the same reversible heat-treated steel chipper blades
All have a four-sided adjustable steel anvil/cutter bar
All have a double-banded belt drive
Chipper Blade Kit: P/N: 72493
66cm disc weighing 74.8kg fully assembled
•
•
•
•
•
•
•
•
•
•
2.5cm thick machined to balance cantilever designed disc turning at 1750 rpm in a counter clockwise rotation
Chipper Models: CH6730HXE & CH611DHXE
17cm square discharge chute
16.5cm x 34.3cm feed chute for easy feeding of limbs
Four reversible heat-treated steel chipper blades
Four-sided anvil/cutter bar mounted on the side of the feed chute
Triple-banded belt
New style local sensing two-stage pump with live hydraulics
SmartFeed Sensor
All have a hand-operated belt engagement lever
• Chipper Blade Kit: P/N: 76293-00
76.2cm disc weighing 120.2kg, 3.2cm thick dynamically balanced turning at 1500 rpms
•
•
•
•
•
•
•
23cm machines
Model CHF9540HXE
23cm x 23cm feed opening
Four reversible heat-treated steel chipper blades
Four-sided adjustable steel anvil/cutter bar
Triple-banded belt drive
Chipper Blade Kit: P/N: 74830-00
76.2cm disc weighing 124.7kg, 3.2cm thick dynamically balanced turning at 1500 rmps
•
•
•
•
•
•
•
•
10
20.3cm and 23cm machines
Models CH8720iHXE, CH8993HXE, CH8540XE, CH9540HXE, CH911DHXE, CH922DHXE – same chipper body
All have an 20.3cm discharge chute rotating 360 degrees
All have a 23cm x 23cm feed opening
All have the same reversible heat-treated steel chipper blades All have a four-sided adjustable steel anvil/cutter bar
All have a triple-banded belt drive
Chipper Blade Kit: P/N: 76293-00
www.bearcatproducts.com
CHIPPER/SHREDDERS
4cm Capacity Chipper/Shredder
Model: SC2170
SHREDDING EFFICIENCY
EASY TO TRANSPORT
• Two cast iron double hammer flails
• Easy Grip Wide Handle
• May be increased to a total of 4 cast iron double hammer flails
for an increased shredding efficiency
• Weight of machine is distributed evenly throughout
DISCHARGE SCREEN
Subaru 170CC ENGINE
• Comes standard with 2.87cm screen
direct drive
SAFETY
TWO CHIPPING BLADES
• Reversible heat-treated steel chipper blades 8cm x 5cm x .6cm
• Meets applicable CE safety standards
• Meets ISO safety decal standards
• Cutting edge is machined at a 45-degree angle for more steel
up front
ACCESSORIES
Weight
Parts
• 54kg
CHIPPER/SHREDDER ROTOR ASSEMBLY
• 1.9cm Discharge Screen (P/N: 76893-35)
• Chipper Blade Kit (P/N: 70738)
• Hammer Flail Kit (P/N: 77022-00)
• Rotor weight is 7.4kg
• Rotor turns at 3,800 rpm
011 + 1 + 701.282.5520
11
CHIPPER/SHREDDERS
8cm Capacity Chipper/Shredders 1 of 2
Models: SC3206XE, SC3265XE, SC3305XE & SC3342XE
Engines
CHIPPER/SHREDDER ROTOR ASSEMBLY
• SC3206XE
SC3206XE
Briggs & Stratton OHV engine 205cc
• Weighs 10.4kg
• SC3305XE
Briggs & Stratton OHV engine 305cc
• SC3265XE
Subaru EX engine 265cc
• SC3342XE
Briggs & Stratton OHV engine 342cc
FUEL CAPACITY
• Rotates counter-clockwise at 3,600 rpm
• 2.5cm diameter rotor shaft
SC3265XE, SC3305XE, SC3342XE
• Weighs 13.2kg
• Rotates counter-clockwise at 3,600 rpm
• 2.5cm-diameter rotor shaft
CHIPPER BLADES & HAMMER FLAILS
• Two reversible heat-treated steel chipper blades
• SC3206XE - 2.8 liters
• Dimensions LxWxH: 7.6cm x 5cm x 6cm
• SC3265XE - 6.1 liters
• SC3206XE - 4 double hammer flails
• SC3305XE & SC3342XE - 3.8 liters
• SC3265XE, SC3305XE & SC3342XE – 8 double hammer flails
Bearings
• Two 2.5cm greasable bearings with 3 bolt cast flanges
belt drive
• With manual belt engagement
• SC3206XE, SC3305XE – Single belt driven
• SC3265XE, SC3342XE - Dual belt driven
Feed chutes
• Shredder Chute opening: 29.8cm x 55.9cm
• Rated chipper feed size of 7.6cm
SIDE DISCHARGE
• You don’t have to move the equipment nearly as often with a
side discharge as you do with a bottom discharge
• Heavy-duty 4.76mm thick screens available
in 4 different sizes to fit your particular needs
• Quick and easy to change
CONVENIENT TRANSPORTATION
• Handle placement for the best control over various terrain, or
tip it back and use the hopper handle for transporting on a
smooth surface
• Pneumatic tires feature grease zerks, enabling easy
greasing of the hub
12
www.bearcatproducts.com
CHIPPER/SHREDDERS
8cm Capacity Chipper/Shredders 2 of 2
Models: SC3206XE, SC3265XE, SC3305XE & SC3342XE
HEAVY-DUTY CONSTRUCTION
SC3206XE
• 14 gauge (1.9mm) steel construction
• Screen - Medium 1.9cm Holes (P/N: 77383-12)
• Built to last with welded construction instead of bolt together.
The strongest motor mounts in the industry.
• Screen - Coarse 3.5cm Holes (P/N: 77384-12)
Machine Dimensions
SC3265XE, SC3305XE, SC3342XE
• Extra strength and reinforcements in areas that matter most
• LxWxH – 101cm x 56cm x 117cm
Weights
• SC3206XE - 88.5kg
• SC3265XE - 113.4kg
• SC3305XE - 103.4kg
• SC3342XE - 119.3kg
Safety
• Meets applicable CE safety standards
• Meets ISO safety decal standards
• Screen - Fine .95cm Holes (P/N: 77382-12)
• Screen - Wet Debris (P/N: 77385-12)
• Screen - Fine .95cm Holes (P/N: 77386-12)
• Screen - Medium 1.9cm Holes (P/N: 77387-12)
• Screen - Coarse 3.5cm Holes (P/N: 77388-12)
• Screen - Wet Debris (P/N: 77389-12)
• Blower Attachment (P/N: 70251)
parts
• Double-edge Blade Kit (P/N: 70738)
• SC3206XE - Hammer Flail Kit (P/N: 77320-00)
• SC3265XE, SC3305XE & SC3342XE –
Hammer Flail Kit (P/N: 77321-00)
accessories
• Leaf Tamper (P/N: 70089)
• Two-Wheel Tow Kit (P/N: 77000-00)
• Debris Bag (P/N: 17854)
• Weatherproof Kit (P/N: 70093)
• Tach/Hour Meter Kit (P/N: 31605-00)
Debris Screens
.95cm
1.9cm
3.5cm
Standard
Wet
Debris
A 3.5cm debris screen is standard with three others available
depending on desired mulch size/type.
011 + 1 + 701.282.5520
13
CHIPPER/SHREDDER/BLOWER
13cm Capacity Chipper/Shredder/BLOWER
Model: SC5720BXE
power soUrce
Feed chutes
• Max torque: 53.6 N.m at 2,500 rpm, runs at
3,600 rpm
• Rated chipper feed size of 12.7cm
• Subaru EH engine 720cc
FUEL CAPACITY
• Shredder opening is 48.7cm x 33cm
Integrated discharge
• 34.1 liters
• With a 360° rotatable, 15.25cm diameter steel tubing with
adjustable spout cap allows you to put the chips where you
want them the first time
CHIPPER/SHREDDER ROTOR ASSEMBLY
• Discharge height is 2.2m
• Machine balanced
Unique Screenless shredder
• Weighs 54 kg
• Rotates clockwise at 2,000 rpm
• 3.8cm diameter rotor shaft
• Unique product, self-feed chipper/shredder without a screen.
This greatly reduces the chance of plugging,
especially with damp material
• Easily accessible through the hinged cover, when
open it exposes one half of the disc for easy access
to the chipping blades and makes for easy clean out
HEAVY-DUTY CONSTRUCTION
CHIPPER BLADES & HAMMER FLAILS
HIGHWAY TOWABLE (SC5720BXE)
• Four reversible heat-treated chipper steel blades
• Dimensions: 7.9cm x 5cm x .64cm
• SC5720BXE -12 Cast iron double hammer flails
Bearings
• Two 3.8cm greasable bearings with two bolt
cast flanges
Double-banded belt drive
• With manual belt engagement on the SC5720BXE
• 4.76mm reinforced steel bed
• 109cm tread width (center to center) and
5.3-12 tires with 454kg torsion axle suspension enables the
chipper to be easily towed down the highway
• 12 volt safety and directional lighting and tow chains are standard
TOWING WEIGHT
• 422kg
Hitch
• 50mm ball coupler is standard
Machine Dimensions
• LxWxH – 233cm x 131cm x 233cm
• Weight: 408kg
Safety
• Meets applicable CE safety standards
• Meets ISO safety decal standards
• Safety chains
• Tail lights standard
accessories
• Leaf Tamper (P/N: 70649)
parts
• Double-Edge Blade Kit (P/N: 72493)
• Hammer Flail Kit (P/N: 77332-00)
14
www.bearcatproducts.com
STUMP GRINDER
Model: SG340
Engine
WEIGHT
DOUBLE-BANDED BELT DRIVE SYSTEM
ESTIMATED GRINDING TIME
• 340cc Honda GXV
• D
ouble-banded belt driving the cutter head for more positive
power transfer. Belt tension idler
• Reduces belt maintenance greatly
• 88kg
• 2
0cm diameter stump, 20cm tall
10cm above – 10cm below
3 minutes
• 25cm diameter stump, 20cm tall — 5 minutes
CARBIDE TEETH
• 1
2 carbide teeth offer maximum cutting
performance. These teeth are locked into the cutter head
(8 curved, 4 straight teeth)
• 31cm diameter stump, 20cm tall — 7 minutes
• 38cmdiameter stump, 20cm) tall— 12 minutes
• 51cm diameter stump, 20cm tall — 25 minutes
• T he cutter head turns at 3600 rpm with a speed at the tips of
2578m/min (8460 .ft/min.)
SAFETY
• A
screen covered opening increases visibility to the
cutter head
• Meets ISO safety decal standards
23cm DIAMETER CUTTER HEAD
• L arge cutting diameter giving a smooth cut and can be easily
removed for quick and easy sharpening
• Meets applicable CE safety standards
PARTS
• R
eplacement carbide cutter teeth kit
(P/N: 76292-00)
DEBRIS FLAP
• Mounted to the stump grinder axle
LARGE ENCLOSED DRIVE SHAFT
• Prevents chips from building up in the belts and pulleys
• L arge 3.8cm diameter drive shaft provides years of
reliability
Single Wheel Brake
20cm PNEUMATIC TIRES
• Pneumatic tires 4.80 x 400 x 20cm rim with
ball bearing hub
SINGLE WHEEL BRAKE
• Allows the stump grinder to pivot and keep in position while
grinding effortlessly
ENGINE KILL SWITCH
• Safety feature to shut engine off if disengaged for
added safety
011 + 1 + 701.282.5520
15
CHIPPERS
10cm Capacity Chipper
Model: CH4400XE
engine
• Subaru EX engine 404cc
HIGHWAY TOWABLE
• Max torque: 27 N.m at 2,400 rpm, runs at 3,600 rpm
• 109cm tread width (center to center) and
4.80-8 tires with 454kg torsion axle suspension enables
the chipper to be easily towed down the highway
FUEL CAPACITY
• 7 liters
• 12 volt safety and directional lighting and tow chains
are standard
35.6cm DIAMETER CANTILEVER DISC
TOWING WEIGHT
• 35.6cm diameter by 2.5cm thick rotor disc
• Weighs 22.2kg
• Machine balanced
• 243kg
Hitch
• 50mm ball coupler is standard
• Rotates clockwise at 2,800 rpm
• 3.2cm-diameter rotor shaft
MACHINE dimensions
• LxWxH – 173cm x 130cm x 105cm
Two CHIPPING BLADES
• Weight - 243kg
• Dimensions: 12.7cm x 10.2cm x 1.3cm
Safety
• Two reversible heat-treated steel chipper blades
• Meets applicable CE safety standards.
BEARINGS
• Two 3.2cm greasable bearings withtwo bolt cast flanges
BELT DRIVE
• Double-banded belt drive with manual belt engagement
ANVIL/CUTTER BAR
• Four-sided adjustable to insure good chipping ability
• LxWxH: 12.7cm x 4.4cm x .95cm
FEED CHUTE
• Meets ISO safety decal standards
• Safety chains
• Tail lights standard
Accessories
• Optional 10cm x 10cm Discharge Chute (P/N: 74634-00)
• Tach/Hour Meter Kit (P/N: 31605-00)
PARTS
• Blade Kit (P/N: 76295-00)
• Opening 33cm X 36.8cm, 96.5cm off the ground
• Feed Throat Opening is 11.4cm X 11.4cm
• Rated Feed Size of 10cm
INTEGRATED DISCHARGE
• Standard Discharge
11.4cm x 22.9cm and discharges towards the ground, from a
height of 36cm
• Optional Discharge
11.4cm x 11.4cm square discharge with adjustable deflector,
discharges at a height of 1.4m
HEAVY-DUTY CONSTRUCTION
• Seven gauge steel throughout housing with welded
construction
• Trailer is made of seven gauge steel
• Tongue is 5cm x 5cm with 11 gauge wall thickness
16
www.bearcatproducts.com
CHIPPERS
13cm Capacity Chipper
Model: CH5653XE
engine
• Subaru EH engine 653cc
• Max torque: 45.5 N.m at 2,500 rpm, runs at
3,600 rpm
FUEL CAPACITY
• 34.1 liters
HIGHWAY TOWABLE
• 112cm tread width (center to center) and 5.30-12 tires with
454kg torsion axle suspension enables the chipper to be easily
towed down the highway
• 12 volt safety and directional lighting and towchains are standard
TOWING WEIGHT
51cm DIAMETER DISC
• 431kg
• Weighs 63.5kg
Hitch
• 51cm diameter by 3.2cm thick rotor disc.
• Machine balanced
• Rotates clockwise at 2,400 rpm
• 3.8cm diameter rotor shaft
• Easily accessible through the hinged cover, when open it
exposes one half of the disc for easy access to the chipping
blades and makes for easy clean out
FOUR CHIPPING BLADES
• Four reversible heat-treated steel chipper blades
• Dimensions: 7.9cm x 5cm x .6cm
BEARINGS
• 50mm ball coupler is standard
MACHINE dimensions
• LxWxH – 185cm x 132cm x 221cm
• Weight - 431kg
Safety
• Meets applicable CE safety standards
• Meets ISO safety decal standards
• Safety chains
• Tail lights standard
• Two 3.8cm greasable bearings with two bolt cast flanges
Accessories
BELT DRIVE
PARTS
• Double-banded belt drive with manual belt engagement
• Tach/Hour Meter Kit (P/N: 31605-00)
• Blade Kit (P/N: 72493)
ANVIL/CUTTER BAR
• Four-sided adjustable to insure good chipping ability
• LxWxH: 14.2cm x 10.2cm x .95cm
FEED CHUTE
• Opening 68.6cm x 71.1cm, 111cm off the ground
• Feed Throat Opening is 14cm x 17.8cm
• Rated Feed Size of 12.7cm
INTEGRATED DISCHARGE
• With a 360° rotatable, 15.2cm diameter steel tubing with adjustable spout cap allows you to put the chips where you want
them the first time
• Discharge height is 2.2m
HEAVY-DUTY CONSTRUCTION
• 6.35cm thick steel housing with welded
construction
• Trailer is made of seven gauge steel
• Tongue is 5cm x 5cm with 6.35mm wall thickness
011 + 1 + 701.282.5520
17
CHIPPERS
15cm Capacity CANTILEVER ChipperS - 1 of 2
Models: CH611DHXE & CH6730HXE
engines
CH6730HXE
• Kohler engine 730cc
• Max torque: 55.4 N.m at 2,600 rpm, runs at 3,600 rpm
CH611DHXE
HYDRAULIC FEED SYSTEM
• Steel hydraulic reservoir, 15 liter capacity on CH611DHXE
and a Nylon hydraulic reservoir, 11.5 liter capacity on the
CH6730HXE
• Live hydraulics
• Kubota engine 1.1 Liter Diesel
• Self-contained hydraulic feed system allows you to evenly feed
limbs into the chipper
• Max torque: 73.5 N.m at 2,200 rpm, runs at
3,000 rpm
• Variable feed rate on the CH611DHXE (available as an accessory on the CH6730HXE) with load sensing two-stage pump
FUEL CAPACITY/Consumption
• 34.1 liters
• Fuel consumption on the 730cc Kohler is
8 liters per hour at full load
• Fuel consumption on the 1.1 L Kubota is
6.44 liters per hour at full load
66cm DIAMETER DISC
• 66cm diameter by 2.5cm thick rotor disc
• Weighs 75kg
• Machine balanced
• Feed rate 0-46 m/min Average 30 m/min
• Self-contained system with infinite speed settings, dedicated
neutral and full reverse, pump output 25 liters/min and 4 hp
with maximum pressure and maximum flow, however
this is rarely required
• Feed system operates under 172 bar (2,500 psi)
• Single 38cm diameter top feed roller
Plus one electronic controller
• Electronic system with Instant Reverse and Smart Feed
• Blade hour maintenance code alerts time to check the blades
for sharpening. (Amber light on the controller)
• Rotates clockwise at 1,750 rpm
• 4.45cm diameter rotor shaft
• Easily accessible through the hinged cover, when
open it exposes one half of the disc for easy access
to the chipping blades and makes for easy clean out
FOUR CHIPPING BLADES
• Four reversible heat-treated steel chipper blades
• Dimensions: 12.7cm x 10.2cm x 1.3cm
BEARINGS
• Two 4.5cm greasable bearings with
• Four bolt cast flanges
BELT DRIVE
• Triple-banded belt drive with manual belt engagement
ANVIL/CUTTER BAR
• Four-sided adjustable anvil to insure good chipping ability
• LxWxH: 16.5cm x 10.2cm x 1.6cm
FEED CHUTE
• Opening 83.8cm x 91.4cm, tray 68cm off the ground
• Feed Throat Opening is 16.5cm x 33cm
• 90° Feed Angle
• Feed table is 96.5cm long
• Rated Feed Size of 15.2cm
INTEGRATED DISCHARGE
CH6730HXE
• With a 360° rotatable, 15.2cm diameter steel tubing with adjustable spout cap allows you to put the chips where you want
them the first time
• Discharge height is 2.72m
CH611DHXE
• W
ith a 360° rotatable, 17cm square steel chute with screwtype adjustable spout cap allows you to put the chips where
you want them the first time
• Discharge height is 2.3m
HEAVY-DUTY CONSTRUCTION
• 6.35cm thick steel housing with weldedconstruction
• Feed table is 10 gauge steel on the CH6730HXE and
seven gauge steel on the CH611DHXE
• Tongue is 7.6cm x 7.6cm with 11 gauge wall thickness
18
www.bearcatproducts.com
CHIPPERS
15cm Capacity CANTILEVER ChipperS - 2 of 2
Models: CH611DHXE & CH6730HXE
HIGHWAY TOWABLE
Safety
• 152cm tread width (center to center) and ST205/75R14 tires
with 816kg torsion axle suspension enables the chipper to be
easily towed down the highway
• Meets ISO safety decal standards
CH6730HXE
• 12 volt safety and directional lighting and tow
chains are standard
CH611DHXE
• 127cm tread width (center to center) and P215/75R15 tires
with 1030kg torsion axle suspension enables the chipper
to be easily towed down the highway
• 12 volt safety and directional lighting and tow
chains are standard
towing weight
• Meets applicable CE safety standards
• Safety chains
• Tail lights standard
accessories
• 2 5/16" Coupler (P/N: 14519-00)
(Serial# 700699 & up)
• Pintle Hitch (P/N: 14900-00) (Serial# 700699 & up)
• Spare Tire Kit (P/N: 75291-00)
• Tach/Hour Meter Kit - Gas (P/N: 31605-00)
• Tach/Hour Meter Kit - Diesel (P/N: 71921)
• CH611DHXE – 1,043kg
• CH6730HXE – 741kg
• Battery Disconnect Kit (CH6730HXE) - (P/N: 76721-00)
Hitch
• Adjustable Feed Speed Kit (CH6730HXE) - (P/N: 76820-00)
• 50mm ball coupler is standard
• Knee Bar Safety Kit (CH6730HXE) - (P/N: 76945-00)
• CH611DHXE has a telescoping tongue the length may be
adjusted up to 45cm
• Knee Bar Safety Kit (CH611DHXE) - (P/N: 76196-00)
ADJUSTABLE tongue JACK
• Roller wheel with 385kg rating
• Battery Disconnect Kit (CH611DHXE) - (P/N: 75291-00)
PARTS
• Blade Kit (P/N: 76293-00)
(Serial# 5VJAA00109W001786 & up)
• Adjustable jack allows one person to easily maneuver
the chipper around and hook up to a vehicle
MACHINE dimensions
• CH6730HXE – LxWxH – 236.2cm x 203.2cm x 228.6cm
• CH611DHXE – LxWxH – 340.4cm x 149.9cm x 236.2cm
Cantilever-Mounted Disc
on Select Models
011 + 1 + 701.282.5520
19
CHIPPERS
20cm Capacity TURNTABLE ChipperS - 1 of 2
Models: CH8720iHXE & CH8993HXE
engines
FOUR CHIPPING BLADES
• EFI Subaru EH engine 720cc, Fuel injected
• Dimensions: 12.7cm x 10.2cm x 1.3cm
CH8720iHXE
• Max torque: 52.1 N.m at 2,800 rpm
CH8993HXE
• Briggs & Stratton Vanguard engine 993cc
• Max torque: 71.1 N.m at 2,350 rpm
FUEL CAPACITY/Consumption
• 34.1 liters
• F uel consumption on the 993cc Briggs & Stratton is
7.7 liters per hour at full load
76cm DIAMETER DISC
• 76cm diameter by 3.2cm thick rotor disc
• Four reversible heat-treated chipper blades
BEARINGS
• Two 4.5cm greasable bearings with four bolt cast flanges
BELT DRIVE
• Triple-banded belt drive with manual belt engagement
ANVIL/CUTTER BAR
• Four-sided adjustable to insure good chipping ability
• LxWxH - 23.5cm x 8.9cm x 1.6cm
HYDRAULIC FEED SYSTEM
• Steel hydraulic reservoir, 11.5 liters capacity
• Weighs 125kg
• Live hydraulics with spring loaded belt tensioner
• Machine balanced
• Rotates at 1,500 rpm
• Self-contained hydraulic feed system allows you to evenly feed
limbs into the chipper
• 4.45cm diameter rotor shaft
• Variable feed rate with load sensing two-stage pump
• Easily accessible through the hinged cover, when open
it exposes one half of the disc for easy access to the chipping
blades and makes for easy clean out
• Feed rate 0-46m/min, Average 30 m/min
• Self-contained system with infinite speed settings, dedicated
neutral and full reverse, pump output 25 liters/min and 4 hp
with maximum pressure and maximum flow, however this is
rarely required
• Feed system operates under 172 bar (2,500 psi)
• Single 38cm diameter top feed roller
Heavy Duty Disc
20
www.bearcatproducts.com
CHIPPERS
20cm Capacity TURNTABLE ChipperS
2 of 2
Models: CH8720iHXE & CH8993HXE
Plus one electronic controller
MACHINE dimensions
• Blade hour maintenance code alerts time to check the blades
for sharpening. (Amber light on the controller)
360° rotational bed
• Electronic system with Instant Reverse and Smart Feed
• LxWxH – 236.2cm x 203.2cm x 228.6cm
• Bed can rotate 360° for ease of feeding from
any direction
FEED CHUTE
• Opening 76.2cm X 78.7cm, Tray 68cm off the ground
• Feed Throat Opening is 23cm X 23cm
• Brake for locking bed in place. With drop pin for positive
transport lock
• 90° Feed Angle
• Keeps work crews out of the street
• Feed table is 96.5cm long
Safety
• Rated Feed Size of 23cm
• Meets applicable CE safety standards.
• Meets ISO safety decal standards
INTEGRATED DISCHARGE
• With a 360° rotatable, 20cm diameter steel tubing
with adjustable spout cap allows you to put
the chips where you want them the first time
• Safety chains
• Discharge height is 2.41m
accessories
• Tail lights standard
• 5.9cm Coupler (P/N: 14519-00) (Serial# 700699 & Up)
HEAVY-DUTY CONSTRUCTION
• Pintle Hitch (P/N: 14900-00) (Serial# 700699 & Up)
• .95cm thick steel face plate on the disc housing
• Low Profile Discharge Chute Kit (P/N: 74581-00)
• 6.35cm thick steel on the wrap around with welded construction
• Knee Bar Safety Kit (P/N: 76195-00)
• Frame is 5cm x 5cm with 6.35mm wall thickness tubing
• Feed table is seven gauge steel
• Tach/Hour Meter Kit (P/N: 31605-00)
PARTS
• Tongue is 5cm x 5cm with 6.35mm wall thickness
• Blade Kit (P/N: 76293-00)
(Serial# 5VJAA00109W001786 & Up)
HIGHWAY TOWABLE
• 172cm tread width (center to center) and P215/75R15 tires
with 1360kg torsion axle suspension enables
the chipper to be easily towed down the highway
• 12 volt safety and directional lighting and
tow chains are standard
TOWING WEIGHT
• CH8720iHXE – 1,009kg
• CH8993HXE – 1,066kg
hitch
• 50mm ball coupler is standard
TELESCOPING TONGUE
• Adjustable length and height. The length may be adjusted up to 45cm
ADJUSTABLE tongue JACK
• Roller wheel with 385kg Rating
• Adjustable jack allows one person to easily maneuver
the chipper around and hook up to a vehicle
011 + 1 + 701.282.5520
21
CHIPPERS
23cm Capacity - 1 of 2
Models: CH911DHXE & CH922DHXE
engines
HYDRAULIC FEED SYSTEM
• Kubota engine 1.1 Liter Diesel
• Live hydraulics with spring loaded belt tensioner
• Max torque: 73.5 N.m at 2,200 rpm, runs at 3,000 rpm
CH922DHXE
• Self-contained hydraulic feed system allows you to evenly feed
limbs into the chipper
• Kubota engine 2.2 Liter Diesel
• Variable feed rate with load sensing two-stage pump
• Max torque: 147 N.m at 1,800 rpm,
runs at 2,800 rpm
• Feed rate 0-46m/min, Average 30 m/min
CH911DHXE
FUEL CAPACITY/Consumption
• 68 liters
• Fuel consumption on the 1.1 Liter Diesel Kubota is
7.57 liters per hour at full load
• Fuel consumption on the 2.2 Liter Diesel Kubota is
14.2 liters per hour at full load
• Steel hydraulic reservoir, 11.5 liter capacity
• Self-contained system with infinite speed settings, dedicated
neutral and full reverse, pump output 25 liters/min and 4 hp
with maximum pressure and maximum flow, however this is
rarely required
• Feed system operates under 172 bar (2,500 psi)
• Single 38cm diameter top feed roller
Plus one electronic controller
• Electronic system with Instant Reverse and Smart Feed
76cm DIAMETER DISC
• 76cm diameter by 3.2cm thick rotor disc
• Weighs 125kg
• Machine balanced
• Rotates at 1,500 rpm
• 4.45cm diameter rotor shaft
• Easily accessible through the hinged cover, when
open it exposes one half of the disc for easy access to the chipping blades and makes for easy clean out
FOUR CHIPPING BLADES
• Four reversible heat-treated steel chipper blades
• Blade hour maintenance code alerts time to check the blades
for sharpening. (Amber light on the controller)
FEED CHUTE
• Opening 76.2cm x 78.7cm, Tray 68cm off the ground
• Feed Throat Opening is 23cm x 23cm
• 90° Feed Angle
• Feed table is 96.5cm long
• Rated Feed Size of 23cm
INTEGRATED DISCHARGE
• Dimensions: 12.7cm x 10.2cm x 1.3cm
• With a 360° rotatable, 20cm diameter steel tubing with adjustable spout cap allows you to put the chips where you want
them the first time
BEARINGS
• Discharge height is 2.36m
• Two 4.5cm greasable bearings with four bolt cast flanges
BELT DRIVE
• Triple-banded belt drive with manual belt engagement
ANVIL/CUTTER BAR
• Four-sided adjustable to insure good chipping ability
HEAVY-DUTY CONSTRUCTION
• .95cm thick steel face plate on the disc
housing
• 6.35mm thick steel on the wrap around with welded construction
• 10cm "C" Channel frame construction
• LxWxH - 23.5cm x 8.9cm x 1.6cm
22
www.bearcatproducts.com
CHIPPERS
23cm Capacity - 2 of 2
Models: CH911DHXE & CH922DHXE
MACHINE dimensions
• LxWxH – 302cm x 200cm x 236cm
UNIT weight WITH OUT WHEELS or AXLES
• CH911DHXE – 1,125kg
• CH9252DHXE – 1,225kg
Safety
accessories
• Electric Brake Kit (P/N: 72730)
• Low Profile Discharge Chute Kit (P/N: 74581-00)
• Fine Chip Rotor Kit (P/N: 76775-00)
• Knee Bar Safety Kit (P/N: 76195-00)
• Hour Meter Kit, Diesel (P/N: 71921)
• Battery Disconnect Kit (P/N: 76721-00)
• Meets applicable CE safety standards
• Meets ISO safety decal standards
011 + 1 + 701.282.5520
PARTS
• Blade Kit (P/N: 76293-00)
(Serial# 5VJAA00109W001786 & up)
23
PTO MACHINES
11cm Capacity
Model: CH45540XE
PTO Drive
ANVIL/CUTTER BAR
• Recommend 11kW-21kW (15 hp-28 hp) at the PTO
• LxWxH - 14.2cm x 10.2cm x .95cm
51cm DIAMETER DISC
FEED CHUTE
• Weighs 22.2kg
• Feed Throat Opening is 11.4cm x 11.4cm
• Machine balanced
• Rated Feed Size of 11.4cm
• 540 rpm input
• 35.6cm diameter by 2.5cm thick rotor disc
• Rotates at 2,400 rpm
• 3.2cm diameter rotor shaft
Chipper Blades
• Two reversible heat-treated steel chipper blades
• Dimensions: 12.7cm x 10.2cm x 1.3cm
BEARINGS
• Four-sided adjustable to insure good chipping ability
• Opening 33cm x 36.8cm, 99cm off of the ground
INTEGRATED DISCHARGE
• Standard discharge is 11.4cm x 22.9cm and
discharges towards the ground, from a height of 38m
• Optional Discharge is 11.4cm x 11.4cm square discharge with
adjustable deflector, dicharges at a height of 1.4m
HEAVY-DUTY CONSTRUCTION
• Two 3.2cm greasable bearings with two bolt cast flanges
• Seven gauge steel throughout housing with
welded construction
belt drive
3-Point hitch
• Two double-banded belt drives
• Category 1
• Chipper weight is 164kg
MACHINE dimensions
• LxWxH – 96.5cm x 91.5cm 111.7cm
Safety
• Meets applicable CE safety standards.
• Meets ISO safety decal standards
accessories
• Optional 10 cm x 10cm Discharge Chute (P/N: 74634-00)
PARTS
• Blade Kit (P/N: 76295-00)
24
www.bearcatproducts.com
PTO MACHINES
13cm Capacity
Models: CH5540HXE & CH5540XE
PTO Drive
ANVIL/CUTTER BAR
• Recommend 19kW-34kW (25 hp-45 hp) at the PTO
• LxWxH - 14.2cm x 10.2cm x .95cm
76cm DIAMETER DISC
HYDRAULIC FEED SYSTEM (CH5540HXE)
• Weighs 63.5kg
• Maximum capacity of 11.36 liters/minute
at 172 bar (2,500 psi)
• 540 rpm input
• 51cm diameter by 3.2cm thick rotor disc.
• Machine balanced
• Rotates at 1,670 rpm
• 3.8cm diameter rotor shaft
• Four-sided adjustable anvil to insure good chipping ability
• Single 38cm diameter top feed roller
• Electric/Hydraulic System to control feed roller
direction
• Easily accessible through the hinged cover, when open it exposes one half of the disc for easy access to the chipping blades and makes for easy clean out
FEED CHUTE
Chipper Blades
• Rated Feed Size of 13cm
• Dimensions: 7.9cm x 5cm x .64cm
INTEGRATED DISCHARGE
• Four reversible heat-treated steel chipper blades
BEARINGS
• Two 3.8cm greasable bearings with two bolt cast flanges.
belt drive
• Double-banded belt drive
• Opening 68.5cm x 71cm
• Feed Throat Opening is 14cm x 17.8cm
• With a 360° rotatable, 15.25cm diameter steel
tubing with adjustable spout cap allows you to
put the chips where you want them the first time
• Discharge height is 2.3m
HEAVY-DUTY CONSTRUCTION
• 6.35mm thick steel throughout housing
with welded construction
CATEGORY 1, 3-Point hitch
• CH5540HXE - Weight is 445kg
• CH5540XE - Weight is 272kg
MACHINE dimensions
• CH5540HXE – LxWxH
239cm x 102cm x 236cm
• CH5540XE – LxWxH
122cm x 114cm x 221cm
Safety
• Meets applicable CE safety standards
• Meets ISO safety decal standards.
accessories (CH5540HXE)
• Auto Feed Kit (P/N: 73071)
PARTS
• Blade Kit (P/N: 72493)
011 + 1 + 701.282.5520
25
PTO MACHINES
13cm Capacity chipper/shredder/blower
Model: SC5540BXE
power soUrce
Safety
• Recommend 19kW-34kW (25 hp-45 hp) at the PTO
• Meets ISO safety decal standards
• 540 rpm input
CHIPPER/SHREDDER ROTOR ASSEMBLY
• Weighs 65.8kg
• Machine balanced
• Rotates clockwise at 2,000 rpm
• Meets applicable CE safety standards
• Safety chains
accessories
• Leaf Tamper (P/N: 70649)
• 3.8cm diameter rotor shaft
parts
• Easily accessible through the hinged cover, when open it exposes one half of the disc for easy access to the chipping blades and makes for easy clean out
• Shredder Knife Kit (P/N: 70972)
• Double-Edge Blade Kit (P/N: 72493)
CHIPPER BLADES & SHREDDING KNIVES
• Four reversible heat-treated steel chipper blades
• Dimensions: 7.9cm x 5cm x .64cm
• 36 shredding knives
Bearings
• Two 3.8cm greasable bearings with two bolt cast flanges
BELT DRIVE
• Double-banded belt drive
Feed chutes
• Shredder opening is 48.7cm x 33cm
• Rated chipper feed size of 12.7cm
Integrated discharge
• With a 360° rotatable, 15.25cm diameter steel tubing with
adjustable spout cap allows you to put the chips where you
want them the first time
• Discharge height is 2.2m
Unique Screenless shredder
• Unique product, self-feed chipper/shredder without a screen.
This greatly reduces the chance of plugging,
especially with damp material
HEAVY-DUTY CONSTRUCTION
• 4.76mm reinforced steel bed
Machine Dimensions
• LxWxH – 45.7cm x 190.5cm x 370.8cm
• Weight: 327 kg
26
www.bearcatproducts.com
PTO MACHINES
20cm Capacity
Model: CH8540XE
PTO Drive
• 540 rpm input
• Recommend 26kW-45kW (35 hp-60 hp) at the PTO
BEARINGS
• Two 4.5cm greasable bearings with four bolt cast flanges
BELT DRIVE
76cm DIAMETER DISC
• Triple-banded belt drive
• Weighs 125kg
ANVIL/CUTTER BAR
• 76cm diameter by 3.2cm thick rotor disc
• Machine balanced
• Rotates at 1500 rpm
• 4.45cm diameter rotor shaft
• Easily accessible through the hinged cover, when opened, it
exposes one half of the disc for easy access to the chipping
blades and makes for easy clean out
Chipper Blades
• Four reversible heat-treated steel chipper blades
• Dimensions: 12.7cm x 10.2cm x 1.3cm
• Four-sided adjustable anvil to insure good chipping ability
• LxWxH - 23.5cm x 8.9cm x 1.6cm
FEED CHUTE
• Opening 77.5cm X 78.7cm, 118cm off the ground
• Feed throat opening is 23cm X 23cm
• Rated feed size of 23cm
INTEGRATED DISCHARGE
• With a 360° rotatable, 20cm diameter steel tubing with adjustable spout cap allows you to put
the chips where you want them the first time
• Discharge height is 2.3m
HEAVY-DUTY CONSTRUCTION
• .95cm thick steel face plate on the disc housing
• 6.35mm thick steel on the wrap around with
welded construction
• Frame is 5cm x 5cm, 6.35mm thick wall
3-Point hitch
• Category 1
• Chipper weight is 402kg
MACHINE dimensions
• LxWxH – 132cm x 119cm x 236cm
Safety
• Meets applicable CE safety standards
• Meets ISO safety decal standards
accessories
• Low Profile Discharge Chute Kit (P/N: 74581-00)
PARTS
• Blade Kit (P/N:76293-00) (Serial# 901388 & Up)
011 + 1 + 701.282.5520
27
PTO MACHINES
23cm Capacity 1 of 2
Models: CH9540HXE & CHF9540HXE
PTO Drive
• 540 rpm input
• Recommend 26kW-45kW (35 hp-60 hp) at the PTO
BEARINGS
• Two 4.5cm greasable bearings with four bolt cast flanges
BELT DRIVE
76cm DIAMETER DISC
• Triple-banded belt drive
• Weighs 125kg
ANVIL/CUTTER BAR
• 76cm diameter by 3.2cm thick rotor disc
• Machine balanced
• Four-sided adjustable anvil to insure good chipping
ability
• Rotates at 1500 rpm
• Dimensions: 23.5cm x 8.9cm x 1.6cm
• 4.45cm diameter rotor shaft
• Easily accessible through the hinged cover, when open it
exposes one half of the disc for easy access to
the chipping blades and makes for easy clean out
Chipper Blades
CH9540HXE
• Four reversible heat-treated steel chipper blades
• Dimensions: 12.7cm x 10.2cm x 1.3cm
CHF9540HXE
• 16 reversible heat-treated steel chipper blades
• Dimensions: 7.9cm x 5cm x .6cm
• Blades are spaced on the disk to provide maximum
coverage and produce an extremely small chip
HYDRAULIC FEED SYSTEM
• Steel hydraulic reservoir, 11.5 liter capacity
• Live hydraulics
• Self-contained hydraulic feed system allows you to
evenly feed limbs into the chipper
• Variable feed rate with load sensing two-stage pump
• Feed rate 0-46m/min, Average 30 m/min
• Self-contained system with infinite speed settings, dedicated
neutral and full reverse, pump output 25 liters/min and 4Hp
with maximum pressure and maximum flow, however this is
rarely required
• Feed system operates under 172 bar (2,500 psi)
• Single 38cm diameter top feed roller
Plus one electronic controller
• Electronic system with Instant Reverse and Smart Feed
• Blade hour maintenance code alerts time to check the blades
for sharpening. (Amber light on the controller)
28
www.bearcatproducts.com
PTO MACHINES
23cm Capacity 2 of 2
Models: CH9540HXE & CHF9540HXE
FEED CHUTE
accessories (CH9540HXE)
• Feed throat opening is 23cm x 23cm
• Fine Chip Rotor Kit (P/N: 76775-00)
• Opening 77cm X 78cm, Tray 68cm off the ground
• 90° feed angle
• Feed table is 96.5cm long
• Rated feed size of 23cm
INTEGRATED DISCHARGE
• Low Profile Discharge Chute Kit (P/N: 74581-00)
PARTS
• Blade Kit for model CH9540HXE (P/N: 76293-00)
(Serial# 901388 & Up)
• Blade Kit for model CHF9540HXE (P/N: 74830-00)
• With a 360° rotatable, 20cm diameter steel
tubing with adjustable spout cap allows you to put the chips
where you want them the first time
• Discharge height is 2.3m
HEAVY-DUTY CONSTRUCTION
• .95cm thick steel face plate on the disc housing
• 6.35mm thick steel on the wrap around with welded
construction.
• Frame is 5cm x 5cm, 6.35mm thick wall
3-Point hitch
• Category 1
• Chipper weight is 590kg
MACHINE dimensions
• LxWxH – 236cm x 203cm x 228cm
Safety
• Meets applicable CE safety standards
• Meets ISO safety decal standards
011 + 1 + 701.282.5520
29
SKID STEER CHIPPERS
11cm Capacity
Model: CH450HXE
SKID-STEER MOUNT
ANVIL/CUTTER BAR
• Easy to attach just connect chipper to the SAE J2513
Quik-Attach, attach the hydraulic hoses, and you are ready to
go
integrated discharge
• CH450XE fits mini skid steer
(Minimum: 41.6L/min - Maximum: 56.8L/min)
• Four-sided adjustable anvil to insure good chipping ability
• The CH450H's standard discharge is 11.4cm x 22.9cm and
discharges towards the ground, from a height of 27cm
CHIPPER DISC
• The Optional Discharge is 11.4cm x 11.4cm square discharge
with adjustable deflector, discharges at a height of 1.4m
• Weighs 22.2kg
weight
• 35.6cm diameter by 2.5cm thick rotor disc
• Machine balanced
• Rotates at 2,400 rpm
• 3.2cm diameter rotor shaft
CHIPPING BLADES
• Two reversible heat-treated steel chipper blades
• Dimensions: 12.7cm x 10.2cm x 1.3cm
• Weighs 163kg
safety
• Meets applicable CE safety standards
• Meets ISO safety decal standards
parts
• Double-Edge Blade Kit (P/N: 76295-00)
Bearings
• Two 3.2cm greasable bearings with two bolt cast flanges
30
www.bearcatproducts.com
WHEELED VACUUMS
Models: WV190 & WV190S
ENGINES
• WV190 & WV190S – 190cc Briggs & Stratton
FAN ROTOR
• Five blade fan
• 6.35mm steel welded rotor construction
ONE PIECE HOUSING
SAFETY
• Meets applicable CE safety standards
• Meets ISO safety decal standards
ACCESSORIES
• Caster Wheels Kit (P/N: 76967-00)
• 10.16cm Diameter Hose Kit (P/N: 73606-00)
• Made with .25cm thick Linear Low Density Polyurethane
with a UV inhibitor
• Nozzle Wear Plate Kit (P/N: 73640-00)
• No cracks or seams, easily replaceable
• Wear Liner (P/N: 76466-00)
• Easily removable adapter with bag
• Discharge opening 15cm x 16.27cm
• Intake width 68.58cm
PARTS
• Replacement Debris Bag (P/N: 31339-00)
PUSH OR Self-Propelled
• Model WV190S is a 3-speed self-propelled
1st – 1.14 kph, 2nd – 1.5 kph, 3rd – 1.95 kph
• Drive off the rear wheels where the weight is centered,
providing more traction
• Ball bearing wheels for a smoother, easier ride
over the ground
HANDLEBARS
• Four adjustable height settings
• Cushion Grip
BAG
• Large capacity, hard bottom, quick dump bag
True 6-bushel capacity
• Dust reduction
• Heavy-duty, double stitched nylon zipper with
deflector flaps
• Adjustable hanger straps which wrap completely
under the bag
ADJUSTABLE FRONT – FIVE HEIGHT SETTINGS
• Ground level (set at factory .635cm above ground)
a) 3.175cm
b) 6.0325cm
c) 8.89cm
d) 14.43cm
WEIGHT
• WV190 – 51kg
• WV190S – 57kg
011 + 1 + 701.282.5520
31
DEBRIS LOADERS
HITCH mount debris loaderS
Models: DL8390 & DL10570
ENGINE
EASY TO USE
• DL10570
Briggs & Stratton 570cc V-Twin with recoil start
EASY MAINTENANCE
Fuel capacity
Machine Dimensions
• DL8390
Honda 390cc OHV with recoil start
• Has a lightweight aluminum handle
• DL8390 - 6.4 liters
• One bolt manifold removal for easy fan clean out
• DL10570 - 7.9 liters
• Dl8390
LxWxH – 89.5cm x 64.8cm x 146.7cm; 127 kg
FAN and HOUSING
• Dl10570
LxWxH – 89.5cm x 67.3cm x 146.7cm; 127kg
• Fan blades made of 9.5mm thick steel
SAFETY
• Wear liners made out of special high strength steel
• Scrolled fan housing for more efficient transfer of air
DIRECT DRIVE
• Meets applicable CE safety standards
• Meets ISO safety decal standards
ACCESSORIES
• 40.6cm Vertical Chute Extension (P/N: 75888-00)
DISCHARGE CHUTE
• 360° Rotational 20.3cm discharge chute
• Swing Away Hitch Mount Kit (P/N: 75739-00)
• Tailgate Adapter Kit (P/N: 75753-00)
Built to last
• Heavy-duty swivel boom
Parts
• Wear Liner Replacement Kit (P/N: 75768-00)
• Light-weight aluminum handle
• 20.3cm diameter 3.7m long flex hose (model DL8390)
• 25.4cm diameter 3.7m long flex hose (model DL10570)
CFMs
• DL8390 – 2317
• DL10570– 2317
Maximum CFM
32
www.bearcatproducts.com
WHEELED
DEBRIS LOADERS
VACUUMS
Skid mount debris loaderS
Model: DL12653 & DL12720
ENGINE
DL12653
• Subaru 653cc with electric start
DL12720
• Subaru 720cc with electric start
Fuel capacity
• 34.1 liters
ACCESSORIES
• 40.6cm Vertical Chute Extension (P/N: 75888-00)
• 1.2 m flexible Horizontal Chute Extension (P/N: 74737-00)
• Work Light Kit (P/N: 77105-00)
Parts
• Flexible Hose (P/N: 12778)
• Wear Liner Replacement Kit (P/N: 77073-00)
Fan and housing
• Wear liners made out of special high strength steel
• Four-blade fan made out of 9.5mm thick steel
• Scrolled fan housing for more efficient transfer of air
Drive
DL12653
• Direct drive
DL12720
• Double-banded belt drive with manual belt engagement
360° ROTATIONAL 20cm DISCHARGE CHUTE
BUILT TO LAST
• Heavy duty swivel boom with hose storage
• 30.5 cm diameter 3.7m long heat resistant flex hose
EASY TO USE
• Has a lightweight aluminum handle
EASY MAINTENANCE
• One bolt manifold removal for easy fan clean out
• Taper lock bearings on fan
Machine Dimensions
• Dl12653
LxWxH – 77cm x 127cm x 218cm; 270 kg
• DL12720
LxWxH – 77cm x 128cm x 218cm; 306 kg
CFMs
• DL12653 – 3410
• DL12720 – 3380
SAFETY
• Meets applicable CE safety standards
• Meets ISO safety decal standards
Model shown with optional trailer.
Trailer not available in CE compliant required areas.
011 + 1 + 701.282.5520
33
ECHO BEAR CAT GEAR
Reusable V inyl
E arplugs with Case
The handy carrying case can be worn on your belt
when not in use. Cleanup is easy with just warm
water. CE and OSHA approved.
P/N: 31539-00
ear muffs
These light-weight ear
muffs have an NRR of
29 dB(A) when used
as directed and meet
CE standard 3.19.
P/N: 36775-00
CE EN352-1:2002
Safet y Glasses
Helmet System
Lightweight and impact resistant. Hard-coated opticalgrade, abrasion resistant lenses. Polycarbonate lenses
offer 99.9% protection from the most intense UV rays.
Includes
helmet, mesh
face visor and
ear protection.
P/N: 36776-00
Tech Glasses
P/N: 36773-00
Zone II Glasses
P/N: 36774-00
Premium Safet y
Vest
Highly visible vest features
5-point tear away
panels for safety.
P/N: 36777-00 (large)
P/N: 36778-00 (xlarge)
P/N: 36779-00 (xxlarge)
ISEA 107-2004
34
CE EN397:1995 cLASS eg & c
ce en1663b
ce en352-3:1997
V ibration-Reducing
Sport/L andscape Gloves
Premium, padded-leatherpalm gloves help reduce
vibration. Also feature form
fitting fingers and
Velcro® -type wrist
band for tight fit.
P/N: 31299-00 (large)
P/N: 31300-00 (xlarge)
www.bearcatproducts.com
NOTES
011 + 1 + 701.282.5520
35
WARRANTY COVERAGE
CURRENT MODELS 1 of 2
PRODUCT
ECHO BEAR CAT WARRANTY
CHIPPER/SHREDDER
MODEL
ENGINE
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
SC2170
170cc Subaru
2 year
1 year
6 mo.
YES
YES
SC3206XE
205cc B&S
2 year
1 year
6 mo.
YES
YES
SC3265XE
265cc Subaru
2 year
1 year
6 mo.
YES
YES
SC3305XE
305cc B&S
2 year
1 year
6 mo.
YES
YES
SC3342XE
342cc B&S
2 year
1 year
6 mo.
YES
YES
SC5540BXE
N/A
2 year
1 year
6 mo.
YES
YES
SC5720BXE
720cc Subaru
2 year
1 year
6 mo.
YES
YES
CHIPPERS
36
MODEL
ENGINE
CONSUMER
COMM.
RENTAL
PARTS
LABOR
CH4400XE
404cc Subaru
2 year
1 year
6 mo.
YES
YES
CH45540XE
N/A
2 year
1 year
6 mo.
YES
YES
CH5540XE
N/A
2 year
1 year
6 mo.
YES
YES
CH5540HXE
N/A
2 year
1 year
6 mo.
YES
YES
CH5653XE
653cc Subaru
2 year
1 year
6 mo.
YES
YES
CH611DHXE
1.1 Liter Kubota
2 year
1 year
6 mo.
YES
YES
CH6730HXE
730cc Kohler
2 year
1 year
6 mo.
YES
YES
CH8720iHXE
720cc Subaru
2 year
1 year
6 mo.
YES
YES
CH8993HXE
993cc B&S
2 year
1 year
6 mo.
YES
YES
CH8540XE
N/A
2 year
1 year
6 mo.
YES
YES
CH9540HXE
N/A
2 year
1 year
6 mo.
YES
YES
CHF9540HXE
N/A
2 year
1 year
6 mo.
YES
YES
CH911DHXE
1.1 L Kubota
2 year
1 year
6 mo.
YES
YES
CH922DHXE
2.2 L Kubota
2 year
1 year
6 mo.
YES
YES
www.bearcatproducts.com
WARRANTY COVERAGE
CURRENT MODELS 2 of 2
PRODUCT
ECHO BEAR CAT WARRANTY
DEBRIS LOADERS
MODEL
ENGINE
CONSUMER
COMM.
RENTAL
PARTS
LABOR
DL8390
390cc Honda GX
2 year
1 year
6 mo.
YES
YES
DL10570
570cc B&S
2 year
1 year
6 mo.
YES
YES
DL12653
653cc Subaru
2 year
1 year
6 mo.
YES
YES
DL12720
720cc Subaru
2 year
1 year
6 mo.
YES
YES
STUMP GRINDERS
MODEL
ENGINE
CONSUMER
COMM.
RENTAL
PARTS
LABOR
SG340
340cc Honda GXV
2 year
1 year
6 mo.
YES
YES
MODEL
ENGINE
CONSUMER
COMM.
RENTAL
PARTS
LABOR
190cc B&S
2 year
1 year
6 mo.
YES
YES
WHEELED VACUUMS
WV190
WV190S
NOTE: “Consumer” use means personal residential household use by the original retail customer. “Commercial" or "Rental” use means all
other uses, including commercial, income producing or rental. Once a unit has experienced commercial or rental use, it will thereafter be
considered as commercial or rental.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of
the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.
011 + 1 + 701.282.5520
37
warranty coverage
non-CURRENT production 1 of 2
PRODUCT
ECHO BEAR CAT WARRANTY
CHIPPER/SHREDDER
MODEL
ENGINE
CONSUMER
COMMERCIAL.
RENTAL
PARTS
LABOR
SC2206
190cc B&S
2 year
1 year
6 mo.
YES
YES
240cc Honda GX
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
(purchased on or before Dec. 31, 2008)
SC3240, SC3240T
240cc Honda GX
(purchased on or after Jan. 1, 2009)
270cc Honda GX
(purchased on or before Dec. 31, 2008)
SC3270, SC3270T
270cc Honda GX
(purchased on or after Jan. 1, 2009)
614cc Honda GX/20hp Kohler
(purchased on or before Dec. 31, 2008)
SC5614
614cc Honda GX
(purchased on or after Jan. 1, 2009)
670cc Honda GX
SC5670B
(purchased on or before Dec. 31, 2008)
670cc Honda GX
(purchased on or after Jan. 1, 2009)
CHIPPER ONLY
MODEL
ENGINE
CONSUMER
COMMERCIAL.
RENTAL
PARTS
LABOR
CH45342
342cc B&S
2 year
1 year
6 mo.
YES
YES
390cc Honda GX
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
N/A
2 year
1 year
6 mo.
YES
YES
614cc Honda GX
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
CH45390
(purchased on or before Dec. 31, 2008)
390cc Honda GX
(purchased on or after Jan. 1, 2009)
CH45540
CH4614
(purchased on or before Dec. 31, 2008)
614cc Honda GX
(purchased on or after Jan. 1, 2009)
CH4540
N/A
614cc Honda GX
CH6614
(20hp Kohler) (purchased on or before Dec. 31,
2008)
614cc Honda GX
(purchased on or after Jan. 1, 2009)
38
www.bearcatproducts.com
WARRANTY COVERAGE
non-CURRENT production 2 of 2
PRODUCT
ECHO BEAR CAT WARRANTY
CHIPPER (continued)
614cc Honda GX
CH6614H
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
993cc B&S Vanguard
2 year
1 year
6 mo.
YES
YES
670cc Honda GX
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
CONSUMER
COMMERCIAL.
RENTAL
PARTS
LABOR
2 year
1 year
6 mo.
YES
YES
2 year
1 year
6 mo.
YES
YES
(20hp Kohler) (purchased on or before Dec. 31,
2008)
614cc Honda GX
(purchased on or after Jan. 1, 2009)
670cc Honda GX
(purchased on or before Dec. 31, 2008)
CH6670H
670cc Honda GX
(purchased on or after Jan. 1, 2009)
CH6993H
CH8670H
(purchased on or before Dec. 31, 2008)
670cc Honda GX
(purchased on or after Jan. 1, 2009)
CH123DH
3 L Kubota
DEBRIS LOADERS
MODEL
ENGINE
670cc Honda GX
DL12670
(purchased on or before Dec. 31, 2008)
670cc Honda GX
(purchased on or after Jan. 1, 2009)
WHEELED VACUUMS
MODEL
ENGINE
CONSUMER
COMMERCIAL.
RENTAL
PARTS
LABOR
WV179
179cc Kawasaki
2 year
1 year
6 mo.
YES
YES
WV179S
179cc Kawasaki
2 year
1 year
6 mo.
YES
YES
Depending on the global region in which the machine is sold, suffixes for all the models listed could include: XE, XF, XS, XN or S.
NOTE: “Consumer” use means personal residential household use by the original retail customer. “Commercial" or "Rental” use means all
other uses, including commercial, income producing or rental. Once a unit has experienced commercial or rental use, it will thereafter be
considered as commercial or rental.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of
the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer.
011 + 1 + 701.282.5520
39
BELT REFERENCE GUIDE
Part
Number
Description
Area Used
Models
12106
Belt, 3V670 Kevlar
72085, 72285, 72385 (SN =>21300), 75011, 75111
12119
Belt, 2RB65
73525
Drive
12273
Belt, 3B90 Banded
CH922DH (74950)
Drive
12317
Belt, 4L 53
73040, 73050, 73450, 74040, 74450, 74455, 74050, 74060, 74065, 75065, 76065, WT160, WT160T, WT190, WT190T
Drive
12365
Belt, 3VX530
73710, SG340 (73711)
Drive
12573
Belt, 3L x 52 Kevlar
73150, 73350, 73265, 73455, 75365, WT160S, WT190S, WT190SE
12660
Belt, 4L350
CH5540H (74554), 74624, 74520
16000
Belt, BX-65
70500
16021
Belt, BX-46
70510, 70520
Drive
16043
Belt, 29"
CH6730H, CH6670H (76624) & CH6993H (76635)(SN>603143),
Pump
16043
Belt, 29"
SC3206 (70050) (SN>105334), SC3342 (75311) (Single Belt Drive SN<C03478), SC3305 (70080), SC3270E (70085),
SC3240 (78380), 70180
Drive
16081
Belt, 27"
SC3206 (70050) (SN<105334)
Drive
16086
Belt, BX-49
70487
Drive
16347
Belt, 2B70 Banded
SC5614 (71020), 73413, 73420, 74520, 73120, 73125, 73725, 71014, DL12670 (75124), DL12720
Drive
16500
Belt, VGates 6958
71110, 71125
Drive
16559
Belt, 3B83 Banded
CH8720iH, CH6614 (71620), CH6614H (72620), CH911DH (72928), CH8670H (76824), CH8993H (76835), 71825, 72825,
74824,
Drive
Belt, Banded Chipper (3RB)
CH8540 (71854), CH9540H (72854), CHF9540H (76854)
Drive
16636
Belt, BX-43
CH9540H (72854), CHF9540H (76854)
Hyd Feed
16660
Belt, BX-38
CH911DH (72928) & CH922DH (74950)(VIN<5VJAA00118W000989), CH6614 (72620), 72825, 74824, 72942,
Hyd Feed
16691
Belt, 3VX500
71755
Drive
16787
Belt, 3B85 Banded
72942
Drive
16799
Belt, 2R3VX475 EL COG
71785
Drive
16911
Belt, 3V560
72085, 72285, 72385, 75011, 75111
16912
Belt, 3V600
72085, 72285, 72385 (SN<21300)
17055
Belt, BX-56
SC5540B (73454),CH5540H (74554), CH5540 (QTY 2 NEEDED), SC5540 (70554), 70520
17558
Belt, 4L-38
70251, 70252
17996
Belts, 29" (Matched set)
SC3265, SC3240 (70380), SC3240T (70580), 70385, SC3342 (Dual Belt Drive SN=>C03478)
Belt, 2RBP56
SC5540B (73554)
32252-00
13426-00
Beater Bar
Drive
Hyd Feed
Drive
Drive
Beater Bar
Drive
Drive
Dual Belt Drive
Drive
13884-00
Belt, SP BEARVAC (3L32)
WV190S (75360) WV179S (77360), and WV160S (75350)
Drive
13973-00
Belt, 2RB63 Banded
SC5670B (75524)
Drive
14261-00
Belt, 3RB48 Banded
CH6730H, CH6993H (76635), CH611DH (76628), CH6670H (76624), 74628, 74624,
Drive
14770-00
Belt, 2RB61
CH4400, CH45342 (77412), CH45390 (77413)
Drive
14804-00
Belt, 5-5V750, Non Cog
CH123DH (7812086)
Drive
18093-00
Belt, 2RB47
CH45540 (77454) (QTY 2 NEEDED)
18277-00
BX44 Belt
CH8720iH, CH8670H (76824), CH8993H (76835)
Hydraulic
Drive
18531-00
BX30 Belt
CH911DH, CH922DH (VIN>5VJAA00178W001015)
Hydraulic
18633-00
BX33 Belt
CH611DH (76628)
Hydraulic
31460-00
Belt, 2BRP67
CH5653
Drive
31498-00
Belt, 2RB40
SC5720B
Drive
31995-00
Belt, 5L500 Wrapped
Aramid
WT24, WT24S, WT24T
Drive
Depending on the global region in which the machine is sold, suffixes for all the models listed could include: XE, XF, XS, XN or S.
40
www.bearcatproducts.com
ROTOR & CHIPPER/SHREDDER KITS
ROTOR REPLACEMENT KITS
Part Number
Description
Models
75399-00
Assembly, C/S Rotor
SC2206
70277
Kit, Replacement Rotor, 5 HP machines
(SN 25659 and below) (Shredder kit not included)
SC3206 (70050)
70062
Kit, Replacement Rotor, 8 HP machines
(SN 25659 and below) (Shredder kit not included)
SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380),
SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385,
70180
70366
Kit, Replacement Rotor, 5” chipper/shredders
(SN 26377 and below) (Shredder kit not included)
SC5540 (70554), SC5540B (71020),
71014, 70500
73371-00
Assembly, Rotor, 5” Chipper/Shredders
(Shredder kit included)
SC5670B (75524), SC5540B (73554), 73525
74209-00
Rotor Replacement Assembly, 3” Chipper Shredders (SN
25660 thru C03277)
SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380),
SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385,
70180
76754-00
Rotor Replacement Assembly
SC2170
76861-00
Rotor Replacement Assembly
SC5720B
77263-00
Narrow Rotor Replacement Assembly
(SN C03478 to current)
SC3206
77304-00
Wide Rotor Replacement Assembly
(SN C03478 to current)
SC3265, SC3305, SC3305E, SC3342
SHREDDER KNIFE & FLAIL REPLACEMENT KITS
Kits contain all knives or flails and hardware
Part Number
Description
Models
70972
Kit, Commercial Shredder with Rectangular Knives
SC5540 (70554), SC5614 (71020),
SC5670B (75524), SC5540B (73554),
73525, 71014, 70520
70973
Kit, Wide Shredder (SN C03277 and below)
SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380),
SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385,
70180
71381
Kit, Narrow Shredder Rectangular Knives
(SN C03277 and below)
SC3206 (70050)
75502-00
Kit, Shredder
SC2206
70316
Kit, Shredder, Small C/S
70530, 70515, 70525
77022-00
Kit, Shredder Flail
SC2170
77025-00
Kit, Shredder Flail
SC5720B
77320-00
Kit, Narrow Body Shredder Flails
(SN C03478 to current)
SC3206
77321-00
Kit, Wide Body Shredder Flails
(SN C03478 to current)
SC3265, SC3305, SC3305E, SC3342
Depending on the global region in which the machine is sold, suffixes for all the models listed could include: XE, XF, XS, XN or S.
011 + 1 + 701.282.5520
41
BLADE KITS
Kits contain all necessary blades and hardware 1 of 2
MODELS
SN RANGE
VIN RANGE
KIT P/N
DESCRIPTION
BLADE P/N
0 - Current
70317
Small Chipper Blade
Kit
70293
0 - 25658*
70205
Single Edge
Small Blade Kit
70155
70738
Tool Steel Blade Kit
70739
76295-00
Chipper Blade Kit
76112-00
72493
Chipper Blade Kit
70739
4cm & 8cm CHIPPER/SHREDDERS
70515, 70525, 70530
SC2170, SC2206, SC3206 (70050),
SC3265, SC3305 (70080), SC3305E
(70085), SC3270 (70380), SC3270T
(70580), SC3342 (75311), SC3240,
70385, 70030, 72085, 72285, 70180
25659 - Current
5VJAA00137W000009 Current
10cm & 13cm CHIPPERS
CH4400
CH5653, CH5540, CH4540 (73454),
CH5540H (74554), CH500H (74500),
73412
CH4614 (73420)
0 - Current
0 - Current
0 - 705078
5VJAA00197W000009 - Current
11cm CHIPPERS
CH45342 (77412), CH45540 (77454),
CH450H, CH45390 (77413)
0 - 902474
0 - 5VJAA00109W001849
74744-00
77412/13 Blade Kit
71122
902475 - Current
5VJAA00109W001850 - Current
76295-00
4-1/2 Chipper Blade
Kit
76112-00
70453
Single Edge
Blade Kit
70155
72493
Chipper Blade Kit
70739
0 - 5VJAA00159W001743
74220-00
6 Inch Blade Kit
71122
5VJAA00159W001744 - Current
76293-00
Chipper Blade Kit
76112-00
5VJAA00157W000010 - Current
71426
8 Inch Chipper Blade
Kit
71122
13cm CHIPPER/SHREDDERS
0 - 26376*
SC5540 (70554), SC5614 (71020),
SC5540B (73554), SC5670B (75524),
SC5720B, 70500, 70520, 71014, 74520,
73525
26377 - Current
5VJAA00137W000071 - Current
15cm CHIPPERS
CH6730H, CH6670H (76624), CH611DH
(76628), CH6993H (76635), 74624,
74628
CH6614 (71620),
CH6614H (72620)
42
0 - 704809
0 - 705118
www.bearcatproducts.com
BLADE KITS
Kits contain all necessary blades and hardware 2 of 2
MODELS
SN RANGE
VIN RANGE
KIT P/N
DESCRIPTION
BLADE P/N
20cm CHIPPERS
CH8720iH, CH8993H (76835),
CH8670H (76824)
71426
8 Inch Chippe
Blade Kit
71122
76293-00
Chipper Blade Kit
76112-00
71426
8 Inch Chipper
Blade Kit
71122
0 - 901387
71426
8 Inch Chipper Blade
Kit
71122
901388 - Current
76293-00
Chipper Blade Kit
76112-00
502304 - Current
74830-00
Blade Kit
70739
0 - 5VJAA00109W001785
71426
8 Inch Chipper Blade
Kit
71122
5VJAA00109W001786 - Current
76293-00
Chipper Blade Kit
76112-00
73900-00
12" Blade Kit
74320-00
0 - 704960
0 - 5VJAA00119W001755
5VJAA00119W001756 - Current
904473 - Current
74824, CH800H (74800)
0 - 804669
20cm & 23cm PTO CHIPPERS
CH8540 (71854),
CH9540H (72854)
CHF9540H (76854)
23cm CHIPPERS
0 - 704696
CH911DH (72928),
CH922DH (74950)
30cm CHIPPERS
CH123DH (7812086)
500423 - Current
5VJAA00137W000023 - Current
STUMPGRINDERS
SG340 (73711), 71755, 71785, 73710
0 - 805549
SG340
810639 - Current
73711 with 12-blade retrograde fit kit,
PN 76256-00
0 - Current
0 - Current
71445
4 Blade Stump Cutter
16687 & 16688
Kit
76292-00
12 Blade Cutter
Replacement Kit
76903-00
12 Blade Cutter Retro
Fit Kit (To change
from 4 blade to 12
blade system)
16687 (4) &
16688 (8)
16687 (4) &
16688 (8)
SG340
0 - Current
76906-00
12 Blade Cutter
Upgrade Kit (To
change from 6 bolt to
12 bolt system)
Depending on the global region in which the machine is sold, suffixes for all the models listed could include: XE, XF, XS, XN or S.
011 + 1 + 701.282.5520
43
ACCESSORIES
Blade and Flail Kits
Blade Kit , P/N: 70738. Models: SC2170, SC3260XE, SC3265XE,
SC3305XE & SC3342XE.
Blade Kit, P/N: 76293-00. Models: CH611DHXE, CH6730HXE,
CH8720iHXE, CH8993HXE, CH911DHXE, CH922DHXE &
CH9540HXE.
Blade Kit , P/N: 72493: Models: SC5720BXE, sc5540BXE, CH5653XE,
CH5540HXE & CH5540XE.
Blade Kit , P/N: 76295-00. Models: CH4400XE, CH45540XE &
CH450HXE.
Shredder Knife Kit, P/N: 70972. Model SC5540BXE.
Shredder Hammer Flail Kit, P/N: 77022-00. Model SC2170.
44
www.bearcatproducts.com
ACCESSORIES
Blade and Flail Kits
Screens
See model page for specific corresponding part numbers.
Hammer Flail Kit, P/N: 77332-00. Model: SC5720BXE.
Fine Screen
Coarse Screen
Medium Screen
Wet Debris Screen
Shredder Hammer Flail Kit, P/N: 77320-00. Model SC3206XE.
Shredder Knife Kit, P/N: 77321-00. Models: SC3265XE, SC3305XE &
SC3342XE.
011 + 1 + 701.282.5520
Debris Bag, P/N: 17854. Models: Any models that discharge to the
ground.
45
ACCESSORIES
Blower Kit with 2-Blade Radial Fan, P/N: 70251. Models: SC3306XE,
SC3265XE, SC3305XE, SC3342XE.
All Weather Cover , P/N: 70093. Models: SC3206XE, SC3265XE,
SC3305XE, SC3342XE.
Two Wheel Tow Kit, P/N: 77000-00. Models: SC3206XE, SC3265XE,
SC3305XE, SC3342XE.
Leaf Tamper, P/N: 70089. Models: SC32306XE, SC3265XE,
SC3305XE, SC3342XE.
Leaf Tamper, P/N: 70649. Models: SC5720BXE, SC5540BXE.
46
www.bearcatproducts.com
ACCESSORIES
Optional 10cm x 10cm Discharge Chute, P/N: 74634-00.
Models: CH4400XE, CH45540XE.
Low Profile Discharge, P/N: 74581-00. Models: CH8540XE,
CH8720iHXE, CH8993HXE, CH911DHXE, CH922DHXE,
CH9540HXE, CHF9540HXE.
Hour Meter Kit - Diesel P/N: 71921. Models: ch611dhxe,
ch911dhxe & ch922dhxe.
Adjustable Feed Speed Kit, P/N: 76820-00.
Models: CH611DHXE, CH6730HXE.
Hour/Tach Kit - Gas, P/N: 31605-00. Models: SC3206XE, SC3265XE,
SC3305XE, SC3342XE, CH4400XE, CH5653XE, CH611DHXE,
CH6730HXE, CH8720iHXE, CH8993HXE.
12 Tooth Cutter Replacement Kit, P/N: 76292-00.
Model SC340.
011 + 1 + 701.282.5520
47
ACCESSORIES
Vacuum Hose Kit, P/N: 73606-00. Models: WV190, WV190S.
Caster Wheel Kit, P/N: 76967-00. Models: WV190, WV190S.
Debris Bag, P/N: 31339-00. Models: WV190, WV190S.
Swing Away Hitch Mount Kit, P/N: 75739-00. Models:
DL8390, DL10570.
Nozzle Wear Plate, P/N: 73640-00. Models: wv190, wv190s.
Vacuum Liner, P/N: 76466-00. Models: WV190, WV190S.
48
Tailgate Adapter Kit, P/N: 75753-00.
Models: DL8390, DL10570.
www.bearcatproducts.com
ACCESSORIES
1.2m Flexible Chute Extension, P/N: 74737-00.
Models: DL12653 & DL12720.
Debris Loader Light Kit, P/N: 77105-00.
Models: DL12653 & DL12720.
Wear Liner Replacement Kit, P/N: 75768-00.
Models: DL8390 & DL10570.
40cm Vertical Chute Extension, P/N: 75888-00.
Models DL12653 & DL12720.
Fine Chip Rotor Kit
CH911DHXE & CH922DHXE – P/N: 76775-00
Auto Feed Kit
CH5540HXE – P/N: 73071
Blade Kit
CHF9540HXE – P/N: 74830-00
Wear Liner Replacement Kit, P/N: 77073-00.
Models: DL12653 & DL12720.
011 + 1 + 701.282.5520
49
NOTES
50
www.bearcatproducts.com
notes
011 + 1 + 701.282.5520
51
ECHO Bear Cat • 237 12th St. NW, West Fargo, ND 58078
For customer service or for your nearest ECHO Bear Cat dealer call 888.625.4520
For International call 011 + 1 + 701.282.5520
Specifications, descriptions and illustrative material in this literature is as accurate as
known at the time of publication, but are subject to change without notice. Illustrations may
include optional equipment and accessories and may not include all standard equipment
©2012 ECHO Bear Cat, a subsidiary of ECHO Incorporated
All Rights Reserved. Printed in the USA
Updated 8.30.2012
www.bearcatproducts.com
Download PDF