How to Measure your Pool Gutter

How to Measure your Pool Gutter
H o w To F in d G u tt e r D e ta il & P o o l P ro f ile
We provide each customer with a gutter detail and pool profile form to ensure a superior custom fit for your pool access system.
The following instructions describe how to accurately complete a gutter detail and pool profile form. If your gutter is not shown on the
following gutter detail form, please draw your gutter in full detail. For faster company response and feedback, the gutter detail and pool
profile information may be faxed to us at 701-297-9702. Only one gutter diagram and one pool profile is required to be completed.
Finding Your Gutter Detail
To the right of this page, there is an
example of a completed gutter detail.
To complete a gutter detail, simply do
the following:
1. Locate the gutter detail drawing on
the gutter detail form that matches
your gutter configuration.
2. If your gutter configuration does
not match a drawing currently on
the gutter detail form, then please
draw your gutter configuration.
3. Measure all the dimensions of your
pool’
s gutter. Follow the gutter
detail drawings as examples of
what to measure.
4. Input your gutter measurements
into the appropriate gutter detail
form provided or draw your own
gutter detail on a seperate sheet of
paper.
Finding Your Pool’
s Profile
deck surface
B = 1-1/2”
D=
A = 39”
39”
6”
3”
pool
wall
pool floor
Sample of a Completed Pool Profile Shown Below:
IMPORTANT NOTE: measurements are from the deck to the pool
floor and NOT the water depth.
A =
E=
C = 3”
from the deck to the top of the curve
B = 4 5 - 1 / 2 ” from the deck to the bottom of the curve
H
deck surface
H
F
pool
wall
C = 1 4 - 1 / 2 ” distance between A and B
D = 4 6 - 1 / 4 ” from deck to pool floor at 2’
from the pool wall
straight edge, like a shepherd’
s hook, with
masking tape marks. Straight edge is placed
level on the deck and leads out into the pool.
A
E
B
C
D
G
F
H
E = 4 6 - 3 / 4 ” from deck to pool floor at 3’
from the pool wall
F =
47”
from deck to pool floor at 4’
from the pool wall
G = 4 7 - 1 / 2 ” from deck to pool floor at 5’
from the pool wall
H = 4 7 - 1 / 2 ” from deck to pool floor at 6’
from the pool wall
G
pool
As you can see above, there are several lettered boxes that each need a measurement,
floor
but don’
t allow yourself to be intimidated by this. Just follow the simple directions below.
1. Start gathering your measurements by using a straight edge item that is long enough to extend out into the pool. A good item to use
would be either the vacuum cleaner handle or a shepherds hook handle.
2. Once you choose your straight edge item, mark it with measuring tape for approximate feet out from the deck of the pool. We
recommend that you place your measuring tape markers at 2 feet, 3 feet, 4 feet, 5 feet and 6 feet incriments.
3. Lay a level across the top if you have a Bullnose or Angled Edge.
4. Take your measurements and fill in the appropriate blanks on your pool profile form. Please see completed Pool Profile example
above.
Remember: Measurements are from the deck surface to the pool floor and NOT the water depth.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement