Century 1140/1130 SDU4 LDU [Rev A] [0501712] [11/2009]

Century 1140/1130 SDU4 LDU [Rev A] [0501712] [11/2009]
CENTURY
L
E
G
E
N
D
A
R
®
Y
L
E
A
D
E
R
S
H
I
P
OWNER'S MANUAL
1140 & 1130 / SDU4 & LDU
PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice.
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 0501712
REV. A
11 / 2009
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original
purchaser that each new MILLER wrecker or other MILLER products will be free from defects in material and
workmanship for a period of twelve (12) months from date placed in service, but in no event shall such warranty
period exceed twenty-four (24) months from date of manufacture by MILLER. The purchaser must promptly
notify MILLER in writing of any failure in material or workmanship. In no event shall MILLER accept such
notification later than twenty-four (24) months from date of delivery or twelve (12) months from date placed in
service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at the
MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon inspection
by MILLER to be defective in material or workmanship. New or remanufactured parts will be used for any
replacement at MILLER's option. This warranty is not transferable. This warranty does not obligate MILLER
to bear the cost of labor or transportation charges in connection with the repair or replacement of any parts
found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless
authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY,
EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of profits or goodwill, or
any other special, incidental, indirect, or consequential damages concerning or relating to any product or parts,
whether based on negligence, strict liability, breach of contract, breach of warranty, misrepresentation or any
other legal theory, regardless of whether the loss resulted from any general or particular requirement which
MILLER knew or had reason to know about at the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any accessories
or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR PRODUCTS. This language
shall in no way affect or diminish the rights of the purchaser to rely on such warranties as are extended by
such manufacturers or suppliers. MILLER shall, to the extent permitted under applicable law, pass on to the
purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products through
changes in design or materials as it may deem desirable without being obligated to incorporate such changes
in products previously sold. This warranty is not intended to cover or include the following items, which are set
forth by way of example and not limitation:
A.Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to weather,
road conditions, road treatments, etc.
B.Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure to provide
reasonable and necessary maintenance, or uses for which the equipment was not designed or intended.
C.Alterations or modifications that affect performance, operation or reliability.
D.Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud flaps,
fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY OTHER
IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
OWNER, USER AND OPERATOR:
We appreciate your choice of our towing and recovery unit for your application. Our number one priority is
user safety which is best achieved by our joint efforts. We feel that you can make a major contribution to
safety if you, as the equipment owner and operator:
1.Comply with Federal, State, and Local Regulations.
2.Read, Understand, and Follow the Instructions in this Manual.
3.Use Good, Safe Work Practices in a Common Sense Way.
4.Only have Authorized and Trained Personnel performing maintenance on the Towing and Recovery
Unit.
© 2009 MILLER INDUSTRIES TOWING EQUIPMENT INC. All rights reserved. Reproduction or use, without express permission, of editorial or
pictorial content, in any manner, is prohibited.
i
TABLE OF CONTENTS
It is assumed by the manufacturer that the Owner/Operator has a thorough knowledge of the accepted and lawful
retrieval and towing methods as dictated by his city, county or state. The manufacturer rejects any liability claim that
may result from the incorrect or unlawful application of its equipment.
Section I - PARTS
SUBFRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2 & I-3
BODY ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-4 & I-5
LDU ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-6 thru I-9
LDU LIFT & EXTEND HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-10 & I-11
LDU TILT & FOLD HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-12 & I-13
LDU LOWRIDER2 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-14 & I-15
SDU4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-16 thru I-19
SDU4 LIFT & EXTEND HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-20 & I-21
SDU4 TILT & FOLD HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-22 & I-23
SDU4 LOWRIDER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-24 & I-25
LIFT ADAPTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-26 & I-27
ROTATOR PINLOCK ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-28 & I-29
1140 3-STAGE RECOVERY BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-30 thru I-33
1140 3-STAGE EXTENSION SYSTEM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-34 & I-35
1140 3-STAGE RECOVERY BOOM HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-36 & I-37
1140 RECOVERY BOOM FRAME HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-38 & I-39
1140 VALVE TO BOOM FRAME HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-40 & I-41
1130 RECOVERY FRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-42 & I-43
1130 RECOVERY BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-44 & I-45
1130 RECOVERY BOOM HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-46 & I-47
ii
TABLE OF CONTENTS
Section I - PARTS
1130 RECOVERY BOOM FRAME HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-48 & I-49
1130 VALVE TO BOOM FRAME HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-50 & I-51
WINCH HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-52 & I-53
SWING LIMIT VALVE ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-54
BOOM SWIVEL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-55
1140 PUMP, VALVE & FILTER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-56 & I-57
1130 PUMP, VALVE & FILTER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-58 & I-59
LEFT CONTROL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-60 thru I-63
RIGHT CONTROL ASSEMBLY (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-64 thru I-67
FRONT OUTRIGGER VERTICAL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-68 & I-69
2-STAGE FRONT OUTRIGGER HORIZONTAL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-70 & I-71
3-STAGE FRONT OUTRIGGER HORIZONTAL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-72 & I-73
FRONT OUTRIGGER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-74 & I-75
3-STAGE REAR OUTRIGGER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-76 & I-77
4-STAGE REAR OUTRIGGER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-78 thru I-81
REAR OUTRIGGER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-82 & I-83
PROPORTIONAL CONTROL KIT W/ SINGLE DRAG WINCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-84
PROPORTIONAL CONTROL KIT W/ DUAL DRAG WINCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-85
HYDRAULIC CYLINDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-86 & I-87
iii
NOTES
Section VI - PARTS
This Section is provided by the manufacturer for the purpose of ordering any component part of the Century 1130
& 1140 Recovery Unit and SDU4 & LDU Underlift that may be required when part replacement is necessary. Be
certain to use only original equipment replacement parts for warranty purposes as well as for keeping your unit in
its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following information to the manufacturer’s Parts
Department.
1.
2.
3.
4.
5.
6.
7.
Manual Number & Date of Publication
Manual Page Number
Page Title
Reference Number of Part Desired
Part Number
Part Description
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner
without delay. Should additional information be required for repair or replacement of certain components, contact
your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may
change the specifications, models and feature availability.
I-1
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
I-2
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
PART NUMBER
0303481
0310637
0400066
0400070
0400114
0400349
0400379
0400452
0400491
0400497
0400498
0400776
0400996
0400998
0402032
0402118
0402121
0717400
0717945
0717946
0717947
0717948
0719585
0721896
0722002
0722171
0722430
0722431
0722669
0722670
0806552
0806765
0806766
0807503
9041402
9041403
9402970
942480011
GA0215
DESCRIPTION
SLIDE PAD, BUMPER
PLUG HOLE
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 1 HHCS GR5 ZP
5/16-18 X 3 HHCS GR 5 ZP
SCREW, 3/8”-16 X 3/4” FL HD SKT
CLIP, 5/16” “J” TYPE TINNERMAN
1/4 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER GR.8,YZ PLATED
WASHER, 1/2’ ID X 2” OD X .150
HEX NUT
SCREW, 5/16”-18 X 1” BUTTON HEAD SKT
SCREW, 3/8”-16 X 1 1/2” BUTTON HEAD SKT
5/16 X 1 HHCS SS
5/16 HELICAL LOCK WASHER SS
3/8 LOCKWASHER 316 STAINLESS
FLOOR PLATE COVER REAR
FLOOR PLATE COVER U/L REAR
FLOOR PLATE OUTER COVER DECK REAR
DECK PANEL COVER LEFT FRONT
DECK PANEL COVER RIGHT FRONT
“D” RING - TOWING
PLATE SPACER
PLATE REAR OUTRIGGER COVER
PLATE FRONT OUTRIGGER COVER
FLOOR SHEET REAR VALVE COVER
FLOOR SHEET FRONT VALVE COVER
COVER - RIGHT CHAIN BOX
COVER - LEFT CHAIN BOX
ANGLE MTG REAR DECK COVERS
DECK PANEL CENTER WELDMENT SHORT
DECK PANEL CENTER WELDMENT LONG
SUBFRAME WELDMENT
1/2-13NC X 1 1/4 HHCS, ZP,GR.8
1/2-13 X 1-1/2 HHCS GR 8 ZP
TOOLBOX MTG. PAD
REAR WASHER PLATE
PIN, D RING
I-3
QTY
2
2
8
8
2
4
8
16
28
6
14
2
4
25
4
8
25
2
1
2
1
1
2
4
2
2
1
1
1
1
1
1
1
1
14
14
14
14
2
Section I - PARTS (cont'd)
BODY ASSEMBLY
I-4
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
BODY ASSEMBLY
PART NUMBER
0307151
0310541
0310590
0310631
0400103
0400104
0400382
0400607
0717386
0718264
0908418
DESCRIPTION
RUBBER FENDER
TOOLBOX - LH AL ROT TRI-2008 DOOR SEAL - (NOT SHOWN)
MUD FLAP
5/16-18 X 1 1/4 HHCS GR.5, ZP
5/16-18 X 1-1/2 LG. HHCS
5/16-18 NYLOCK HEX NUT ZP
RIVET, 1/4” X 5/8” ALUMINUM
BAR - MUDFLAP
ANGLE - ROTATOR MUD FLAP MOUNT
MUD FLAP KIT CENTURY ROTATOR
I-5
QTY
3
1
1
2
8
4
12
54
2
2
1
Section I - PARTS (cont'd)
LDU ASSEMBLY
I-6
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
LDU ASSEMBLY
PART NUMBER
0300110
0300113
0300329
0301197
0301397
0301398
0301470
0301620
0301822
0301895
0302538
0302561
0303088
0303097
0303098
0303490
0303892
0306744
0306746
0306825
0307351
0307980
0310477
0310478
0400044
0400126
0400139
0400141
0400151
0400191
0400219
0400228
0400248
0400271
0400288
0400306
0400392
0400408
0400430
0400437
0400481
0400482
0400490
0400508
0400990
0703277
0703484
0703488
0703734
0706995
DESCRIPTION
SNAP RING, 1”
GREASE FITTING, 1/4-28 STRAIGHT
SNAP RING, EXT 2”
DETENT SPRING
GREASE FITTING, 90 DEG
DETENT BALL
ELBOW, 6MJ-8MB90
FITTING, ELBOW, 6MJ-6MB90
O-RING, PIVOT PIN
GREASE FITTING, 1/8 NPT STRAIGHT
SPRING BUSHING, 3.5OD X 3ID X 2.5
SLIDE PAD
BUSHING, PIVOT PIN
THRUST WASHER, 1/8” THICK
THRUST WASHER, 1/16” THICK
WEAR PAD (1/2 X 1 X 4)
SLIDE PAD, BOOM SIDE
CYLINDER - U/L EXTEND
CYLINDER, HYD LIFT
PAD - WEAR
SLIDE PAD, SDU/2
ELBOW, 1/8 NPT X 3/8 TUBE 90
CYLINDER, HYD LIFT
CYLINDER - TILT
DRIVE SCREW, #10-24 X 1/2” RD HD
3/8-16 X 1 HHCS GR.5,ZP
SCREW, 3/8”-16 X 1-1/2” HEX SKT SET
3/8-16 X 7/8 HHCS GR5 ZP
3/8-24 X 3/4 HHCS GR5 ZP
1/2-13 X 3 3/4 HHCS GR5 ZP
1/2-13 X 4-1/2 HHCS GR.5 ZP
SCREW, 3/8”-24 X 5/8” BUTTON HEAD SKT
5/8-11 X HHCS GR 8 ZP
SCREW, 5/8”-11 X 4-1/2” SKT HD CAP
3/4-10 X 2-1/2 HHCS GR.8 GOLD
7/8-9 X 3 HHCS GR. 8 GOLD
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
3/4-10 NYLOCK HEX NUT ZP
7/8-9 NYLOCK HEX NUT GR.8 ZP
LOCKWASHER, 3/8” EXT TOOTH
3/8 HELICAL LOCK WASHER ZP
3/4 FLAT WASHER GR.8
5/8 HELICAL LOCK WASHER ZP
1/2-13 X 1/2 SKT HD SET SCREW ZP
SLIDER PAD
PULLEY, HOSE TENSIONER
WASHER, HOSE TENSIONER PULLEY
SHIM, SIDE PLATE, OUTER BOOM
BLOCK, STOP 2ND STAGE
I-7
QTY
2
12
4
1
2
1
4
6
1
5
2
8
1
1
1
2
3
1
1
2
2
2
1
1
8
4
2
3
9
4
1
8
4
2
8
8
4
5
8
8
9
7
8
6
8
2
2
4
2
4
Section I - PARTS (cont'd)
LDU ASSEMBLY (cont'd)
I-8
Section I - PARTS (cont'd)
LDU ASSEMBLY (cont'd)
ITEM
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
PART NUMBER
0706996
0707019
0707028
0708470
0709242
0710051
0710052
0714240
0714388
0716033
0716546
0716547
0718912
0722412
0722413
0722414
0722415
0802914
0804303
0804304
0804423
0804424
0806756
0807499
0807500
0807501
0807502
9012549
9012552
9012584
9043973
9044434
805040011
945030004
946250019
HD0152
DESCRIPTION
SPACER PAD
EXTEND CYLINDER SHAFT
PAD, BEARING
SPACER - DETENT BALL
MAIN PIVOT PIN
PIVOT PIN, TOP HALF
PIVOT PIN, BOTTOM HALF
PIN, FOLD CYL
ANGLE - NYLON SHEAVE
PIN - EXTEND CYLINDER
PLATE - PIVOT MOUNTING
PLATE - PIVOT MOUNTING
VERTICAL BOOM GUIDE SHIM
PIN - UNDERLIFT PIVOT
PIN, LIFT CYLINDER
PIN - TILT CYLINDER BASE
PIN - TILT CYLINDER ROD
CROSSBAR WELDMENT
SUPPORT, LEFT PIVOT WELDMENT
SUPPORT, RIGHT PIVOT WELDMENT
2ND STAGE U/L BOOM
3RD STAGE BOOM WLMT
PIN WLMT - FOLD CYL
OUTER MAST WELDMENT
INNER MAST WELDMENT
TILT CYLINDER BRACKET WELDMENT
UNDERLIFT OUTER BOOM WELDMENT
CONNECTOR, 3/8 TUBE X 1/8 NPT
BULKHEAD COUPLING, 1/8 ELBOW, 1/4 NPT X 3/8 TUBE 90
SCREW, 5/16”-16 X 1-1/2” FL HD SKT
3/8-16X1 NC FLAT
VERTICAL BOOM GUIDE
WEAR PAD (UPPER)
SLIDE PAD RETAINER BAR
SNAP RING, 3” INTERNAL
I-9
QTY
1
1
1
1
1
1
1
1
4
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
8
4
2
2
4
2
Section I - PARTS (cont'd)
LDU LIFT & EXTEND HYDRAULICS
I-10
Section I - PARTS (cont'd)
LDU LIFT & EXTEND HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PART NUMBER
0300644
0301470
0301620
0301778
0301998
0302000
0302065
0302510
0302511
0302575
0303017
0303170
0303187
0306744
0307106
0307107
0307417
0310477
0400078
0400367
0400451
0703001
9012594
DESCRIPTION
QTY
HOSE CLAMP, 8”
ELBOW, 6MJ-8MB90
FITTING, ELBOW, 6MJ-6MB90
CONNECTOR 6MJX10MB
HOSE ASSY - 6FJX-6M2T-6FJX90S 24” LG
HOSE ASSY - 24” LG
CAP, 6FJ
CONNECTOR, 6MJ-6MBL
VALVE, 4 SPOOL VDP12CDDD10
BULKHEAD RUN TEE, 6MJ-6BLKHD-6MJ W/NUT
CONNECTOR 8MBX6FB
HOSE ASSEMBLY, 75” LG.
HOSE ASSY - 6FJX-6M2T-6FJX 141” LG
CYLINDER - U/L EXTEND
CONNECTOR 4MBX6FB
VALVE HOLDING 4000 PSI SAE
HYDR TUBE ASSY, 3/8”OD X .035” W X 3”
CYLINDER, HYD LIFT
1/4-20 X 2 HHCS GR5 ZP
1/4-20 NYLOCK HEX NUT ZP
1/4 FLAT WASHER ZP
BRACKET - MOUNTING
FITTING, HYD RUN TEE, 6MJ-6MB-6MJ
I-11
1
2
4
2
2
1
2
2
1
2
2
2
2
1
1
1
1
1
2
2
2
1
1
Section I - PARTS (cont'd)
LDU TILT & FOLD HYDRAULICS
I-12
Section I - PARTS (cont'd)
LDU TILT & FOLD HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART NUMBER
0301470
0301620
0301662
0301730
0301778
0301837
0301998
0302510
0302511
0302813
0303017
0303389
0306746
0307042
0307980
0310289
0310478
0310698
DESCRIPTION
ELBOW, 6MJ-8MB90
FITTING, ELBOW, 6MJ-6MB90
HOSE ASSY - 6FJX-6M1T-6FJX 120” LG
DOUBLE HOLDING VALVE
CONNECTOR 6MJX10MB
INLINE ORIFICE
HOSE ASSY - 6FJX-6M2T-6FJX90S 24” LG
CONNECTOR, 6MJ-6MBL
VALVE, 4 SPOOL VDP12CDDD10
HOSE ASSY - 6FJX-6M2T-6FJX 180” LG
CONNECTOR 8MBX6FB
HOSE ASSY - 6FJX-6M3K-6FJX90S 46”LG
CYLINDER, HYD LIFT
CONNECTOR, (6MJ-6MBR-3/64)
ELBOW, 1/8 NPT X 3/8 TUBE 90
CONNECTOR, 8MJ-8MBL
CYLINDER - TILT
FITTING CONNECTOR 6FJX-6FJX
I-13
QTY
4
2
1
1
2
1
2
2
1
1
3
2
1
1
2
1
1
1
Section I - PARTS (cont'd)
LDU LOWRIDER2 ASSEMBLY
I-14
Section I - PARTS (cont'd)
LDU LOWRIDER2 ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
PART NUMBER
0300113
0302538
0303088
0310629
0400079
0400086
0400139
0400249
0400344
0400392
0400483
0400653
0400749
0706996
0717869
0717871
0717872
0717873
0718087
0718096
0807571
0807572
0807573
0807574
930150003
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
SPRING BUSHING, 3.5OD X 3ID X 2.5
BUSHING, PIVOT PIN
U/L BOOM EXTEND CYLINDER
SCREW -1/4”-20 X 3/4” FL SKT HD
SCREW -1/4”-20 X 3/4” FL SKT HD
SCREW, 3/8”-16 X 1-1/2” HEX SKT SET
5/8-11 X 1-1/4 SOC HD CAP SCREW
1/2-13 X 3/4 FLAT HD SOCKET SCREW
3/8-16 NYLOCK HEX NUT ZP
LOCKWASHER, 3/8” COUNTERSUNK
3/8-24 X 1 FLAT HD SOCKET SCREW 1/2-13 X 1-1/4 FLAT HD SOCKET SCREW
SPACER PAD
PLATE - SPACER (BOLT-ON)
PIN - CYLINDER ROD
PIN - EXTEND CYL BASE
PIN - SHEAR
PLATE - PAD SACER
STOP BLOCK
OUTER BOOM WLMT
BRACKET - EXTEND CYLINDER
2ND STAGE WLMT
3RD STAGE WLMT
TOP PAD
I-15
QTY
8
2
1
2
12
4
1
2
8
1
4
4
18
1
4
1
1
2
2
2
1
1
1
1
8
Section I - PARTS (cont'd)
SDU4 ASSEMBLY
I-16
Section I - PARTS (cont'd)
ITEM
SDU4 ASSEMBLY
PART NUMBER
DESCRIPTION
--
0904652
INSTA SDU/2 & SDU/3 FIX & ROT.
1
0300113
GREASE FITTING,1/4-28 STRAIGHT
2
0300329
SNAP RING, EXTERNAL 2
3
0301397
GREASE FITTING,1/4-28 90°
4
0400288
3/4-10X2.5HHCS GR 8GOLD
5
0400306
7/8-9X3HHCS GR 8 GOLD
6
0400430
3/4-10 NYLOK HEXNUT ZP
7
0400437
7/8-9 NYLOK HEX GR 8ZP
8
0709242
PIN - MAIN PIVOT
9
0716546
PLATE - PIVOT MOUNTING SHIM
10
0716547
PLATE - PIVOT MOUNTING SHIM
11
0804034
TILT CYL MTG BRKT1
12
0804303
SUPPORT-LEFT PIVOT WLDMT
13
0804304
SUPPORT-RIGHT PIVOT WLDMT
14
UK0126
PIN-TILT CYL.-BASE END
--
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
0909047
0300110
0300113
0300329
0301895
0301949
0303892
0306746
0307351
0307378
0400126
0400219
0400248
0400408
0400508
0703734
0806756
0714209
0714218
0714240
0717919
0807204
0806658
9012549
9012552
9012584
9044434
945030004
HC0159
HD0152
0718912
0307106
0307107
0400078
UNDERLIFT/MAST SDU/4 ASSY
SNAP RING, 1” 5100-100
GREASE FITTING,1/4-28 STRAIGHT
SNAP RING, EXTERNAL 2
GREASE FITTING,STR 1/8 PTF
3/8” OD SYNFLEX HOSE 100’
SLIDE PAD-BOOM-SIDE
CYL HYD - FOLD
SLIDE-PAD SDU/2 U/L
CYLINDER-TILT SDU/2
3/8-16X1 HHCS GR5 ZP.
1/2-13X4.5HHCS GR5 ZP
5/8-11X1HHCS GR 8 ZP
1/2-13 NYLOK HEX NUT ZP
5/8” HELICAL LCKWSHRZP
SHIM,SIDE PLATE,OUT.BOOM
PIN WELD’T - FOLD CYLINDER
PIN - PIVOT
PIN - TILT CYLINDER
PIN - FOLD CYLINDER
PIN, LIFT CYLINDER1
MAST - SDU/4 OUTER WELDT
MAST-SDU/3 INNER WELD’T
CONNECTOR-MALE 3/8TUBEX1
BULKHEAD ADAPTER 1/8M-1/8F NPT
ELBOW-1/4NPT X 3/8TUBE 9
3/8-16X1 NC FLAT SOCKET HD CAP
UPPER WEAR PAD-RECOVERY
CYLINDER, LIFT
SNAP RING, 3" INTERNAL
SHIM, VERTICAL BOOM GUIDE
FITT, CONNECTOR 4MB-6FB
VALVE, HOLDING 4000 PSI SAE
1/4-20X2 HHCS GR5 ZP
I-17
QTY
-2
2
2
8
8
8
8
1
0
0
1
1
1
-2
4
2
9
6 FT
1
1
2
2
4
1
4
1
4
6
1
1
1
1
1
1
2
6
2
4
2
1
2
2
1
1
4
Section I - PARTS (cont'd)
SDU4 ASSEMBLY (cont'd)
I-18
Section I - PARTS (cont'd)
SDU4 ASSEMBLY (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
48
49
0909047
0400367
0703001
UNDERLIFT/MAST SDU/4 ASSY (cont'd)
1/4-20 NYLOK HEX NUT ZP
BRKT,MTG,CHECK VALVE
-4
1
--
50
51
52
53
54
55
56
57
58
59
60
0903156
0301197
0301398
0301822
0303097
0303098
0400271
0400508
0708470
0710051
0710052
0802914
CROSSBAR-5” ASSY
COMP.SPRING,CROSS BAR,FI
STEEL BALL, 1-3/16 DIA
O-RING - PIVOT PIN
THRUST WASHER - 1/8 THK
THRUST WASHER - 1/16 THK
5/8-11X4.5SKTHDCAPSCREW
5/8” HELICAL LCKWSHRZP
SPACER - DETENT BALL SPRG
PIN - TOP HALF PIVOT
PIN - BOTTOM HALF PIVOT
CROSSBAR WELDMENT
-1
1
1
1
1
2
2
1
1
1
1
--
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
0907810
0300113
0301817
0301818
0302538
0303501
0400139
0400151
0400196
0400228
0400392
0400481
0719515
0707034
0710450
0718764
0712195
0803441
0806656
BK2003
0307013
0400990
BOOM-SDU/3 HORTZ ASSY
GREASE FITTING,1/4-28 STRAIGHT
SLIDE PAD-HORIZ BOOM NYL
SLIDE PAD-HORIZ BOOM
BUSHING - U/L
CYL HYD EXT-3M U/LIFT H/CHROME
3/8-16X1.5 HEX SKT SET
3/8-24X3/4 HHCS GR5 ZP
1/2-13X1.25 SOCKET HD
3/8-24X5/8 BUTTON HEAD
3/8-16 NYLOK HEX NUT ZINC
3/8” EXT.TOOTH LOCKWASHER
PLATE, STOP
PLATE,STOP
BAR - RETRACT
SHAFT - EXTEND CYL
SHAFT - EXTEND CYLINDER
BOOM-2ND STAGE U/L WELDMENT
BOOM-OUTER U/L WLDMT
PAD-WEAR
PAD - WEAR
SET SCRW,1/2-13X1/2 SKT,CUP PT
-8
3
2
2
1
2
6
4
4
2
6
1
2
2
1
1
1
1
2
2
8
--
82
83
84
85
86
87
88
89
0903901
0303088
0400044
0703277
0803442
9043973
805040011
0400451
0400482
BOOM-U/L INNER ASSY
BUSHING - PIVOT PIN
10X1/2 DRIVE SCREW RD
PAD, SLIDER
BOOM-U/L INNER WELDT 3RD STAGE
5/16-18X1 1/2 NC FLAT SOCKET HD CAP
VERTICAL BOOM GUIDE PAD
WASHER, 1/4" FLAT ZP
LOCKWASHER, 3/8" HELICAL ZP
-1
8
2
1
4
2
4
6
I-19
Section I - PARTS (cont'd)
SDU4 LIFT & EXTEND HYDRAULICS
I-20
Section I - PARTS (cont'd)
SDU4 LIFT & EXTEND HYDRAULICS
ITEM
PART NUMBER
DESCRIPTION
QTY
--
1
2
3
4
0904652
0301998
0302065
0302575
0303170
--
5
6
7
8
9
10
11
12
13
14
15
16
0904785
0400082
0400191
0400366
0400367
0400408
0400451
0700188
0703484
0703487
0703488
0714388
AWS-1011-A
--
17
18
19
20
21
22
23
24
25
26
27
28
29
30
0909047
0300644
0301620
0302000
0303187
0303193
0307106
0307107
0307417
0400078
0400367
0400451
0703001
9012594
HC0159
UNDERLIFT ASSEMBLY, SDU/4
HOSE CLAMP, 8"
ELBOW, 6MJ-6MB90
HOSE ASSEMBLY, 24"
HOSE ASSEMBLY, 141"
BLACK SKUFF JACKET SJ16 (NOT SHOWN)
CONNECTOR, 4MB-6FB
HOLDING VALVE, 4000 PSI SAE
TUBE ASSY, 3/8" OD X .035" W X 3"
SCREW, 1/4"-20 X 2" HEX HD CAP GR5 ZP
NUT, 1/4"-20 NYLOK HEX ZP
WASHER, 1/4" FLAT ZP
MOUNTING BRACKET, CHECK VALVE
RUN TEE, 6MJ-6MB-6MJ
UNDERLIFT LIFT CYLINDER
--
31
32
0907810
0301470
0303501
HORIZONTAL BOOM ASSEMBLY, SDU/4
ELBOW, 6MJ-8MB90
UNDERLIFT EXTEND CYLINDER
-2
1
0908137
0300044
0301522
0303017
0302511
PROPORTIONAL CONTROL VALVE KIT
CONNECTOR, 6MJ-8MB
CONNECTOR, 6MJ-6MB
CONNECTOR, 8MB-6FB
VALVE, CONTROL
-2
2
2
1
--
33
34
35
36
INSTALLATION, SDU/4 FIXED & ROTATOR
HOSE ASSEMBLY, 24"
CAP ADAPTER
BULKHEAD RUN TEE
HOSE ASSEMBLY, 75"
-2
2
2
2
HOSE TENSION KIT (NOT SHOWN)
EYE BOLT, 1/4"-20 X 1-1/8
SCREW, 1/2"-13 X 3-3/4" HEX HD CAP GR5 ZP
NUT, 1/4"-20 HEX ZP
NUT, 1/4"-20 NYLOK HEX ZP
NUT, 1/2"-20 NYLOK PLATED
WASHER, 1/4" FLAT ZP
BRACKET, BULKHEAD
PULLEY, HOSE TENSIONER
BRACKET, HOSE TENSIONER PULLEY
WASHER, HOSE TENSIONER PULLEY
ANGLE, NYLON SHEAVE
SPRING CLAW
-4
6
2
4
6
2
2
4
2
8
4
2
I-21
-1
4
1
2
45 FT
1
1
1
2
4
2
1
1
1
Section I - PARTS (cont'd)
SDU4 TILT & FOLD HYDRAULICS
I-22
Section I - PARTS (cont'd)
SDU4 TILT & FOLD HYDRAULICS
ITEM
PART NUMBER
DESCRIPTION
--
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0904652
0300044
0301470
0301522
0301619
0301696
0301730
0301998
0302808
0303389
0307106
0307107
0400078
0400367
0400451
0703001
INSTALLATION SDU/4 FIXED & ROTATOR
CONNECTOR, 6MJ-8MB
ELBOW, 6MJ-8MB90
CONNECTOR, 6MJ-6MB
BRANCH TEE, 6MJ-6MJ-6MB
ELBOW, 6MJ-6FJX90
VALVE, DOUBLE HOLDING
HOSE ASSEMBLY, 24"
HOSE ASSEMBLY, 18"
HOSE ASSEMBLY, 46"
CONNECTOR, 4MB-6FB
VALVE, HOLDING 4000 PSI SAE
SCREW, 1/4"-20 X 2" HEX HD CAP GR5 ZP
NUT, 1/4"-20 NYLOK HEX ZP
WASHER, 1/4" FLAT ZP
MOUNTING BRACKET, CHECK VALVE
--
16
17
18
19
20
21
22
23
24
25
26
0909047
0300365
0301620
0301837
0301997
0302813
0303193
0306746
0307378
0400078
0400367
0400451
UNDERLIFT SDU/4 ASSEMBLY
HOSE CLAMP, 7"
ELBOW, 6MJ-6MB90
INLINE ORIFICE
HOSE ASSEMBLY, 18"
HOSE ASSEMBLY, 108"
BLACK SCUFF JACKET SJ16 (NOT SHOWN)
UNDERLIFT FOLD CYLINDER
UNDERLIFT TILT CYLINDER
SCREW, 1/4"-20 X 2" HEX HD CAP GR5 ZP
NUT, 1/4"-20 NYLOK HEX ZP
WASHER, 1/4" FLAT ZP
--
27
28
29
30
--
0300044
0301522
0303017
--
CONTROL VALVE KIT
CONNECTOR, 6MJ-8MB
CONNECTOR, 6MJ-6MB
CONNECTOR, 8MB-6FB
VALVE, CONTROL
I-23
QTY
-2
2
2
3
2
1
2
4
2
1
1
2
4
2
1
-1
4
2
2
2
45 FT
1
2
2
4
2
-2
2
2
1
Section I - PARTS (cont'd)
SDU4 LOWRIDER ASSEMBLY
I-24
Section I - PARTS (cont'd)
SDU4 LOWRIDER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
PART NUMBER
0300113
0302538
0303088
0307425
0400079
0400086
0400139
0400181
0400249
0400344
0400392
0400483
0400491
0400653
0400749
0706996
0717869
0717871
0717872
0717873
0718087
0718096
0806810
0806812
0806813
0806814
930150003
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
SPRING BUSHING, 3.5OD X 3ID X 2.5
BUSHING, PIVOT PIN
U/L BOOM EXTEND CYLINDER
SCREW - 1/4”-20 X 3/4” FL SKT HD
SCREW - 1/4”-20 X 3/4” FL SKT HD
SCREW, 3/8”-16 X 1-1/2” HEX SKT SET
1/2-13 X 1-1/2 HHCS GR 5 ZP
5/8-11 X 1-1/4 SOC HD CAP SCREW
1/2-13 X 3/4 FLAT HD SOCKET SCREW
3/8-16 NYLOCK HEX NUT ZP
LOCKWASHER, 3/8” COUNTERSUNK
1/2 HELICAL LOCK WASHER ZP
3/8-24 X 1 FLAT HD SOCKET SCREW 1/2-13 X 1-1/4 FLAT HD SOCKET SCREW
SPACER PAD
PLATE - SPACER (BOLT-ON)
PIN - CYLINDER ROD
PIN - EXTEND CYL BASE
PIN - SHEAR
PLATE - PAD SACER
STOP BLOCK
OUTER BOOM WLMT
BRACKET - EXTEND CYLINDER
3RD STAGE BOOM WLMT
2ND STAGE BOOM WLMT
TOP PAD
I-25
QTY
8
2
1
2
12
4
1
10
2
8
1
4
10
4
8
1
4
1
1
2
2
2
1
1
1
1
8
Section I - PARTS (cont'd)
LIFT ADAPTERS
I-26
Section I - PARTS (cont'd)
ITEM
LIFT ADAPTERS
PART NUMBER
DESCRIPTION
QTY
1
2
3
0300091
HD1259
VA0662
TRAILER BALL, 2"
SAFETY SNAP PIN
PIVOT PIN WELDMENT
1
1
1
--
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
0906613
0200018
0200019
0200020
0200021
0200022
0200023
0200024
0200042
0306564
0400585
0711002
0801186
0801187
0802810
0803591
0803592
0900900
0902321
STANDARD FORK KIT, SDU
FORK, SHORT 3" OPENING
FORK, SHORT 4-1/2" OPENING
FORK, MEDIUM 3" OPENING
FORK, MEDIUM 4-1/2" OPENING
FORK, LONG 3" OPENING
FORK, LONG 4-1/2" OPENING
FORK, OFFSET REAR AXLE
FORK, MEDIUM ROUND AXLE
ALUM T HANDLE, 5/8 X 1-1/4
COTTER PIN, 1-1/4" HAIR PIN
BOLT, MODIFIED
HDU CHAIN ADAPTER, RT
HDU CHAIN ADAPTER, LT
PIVOT SPRING LIFT BRACKET
FORK ADAPTER, LEFT
FORK ADAPTER, RIGHT
RETAINER PIN ASSEMBLY
RETAINER PIN, SPRING LIFT
-2
2
2
2
2
2
2
2
2
2
2
1
1
2
1
1
2
2
--
22
23
24
25
26
27
--
0302198
0400177
0400491
0500241
0803831
0902378
124002211 PINTLE HOOK KIT
PINTLE HOOK
SCREW, 1/2"-13 X 1-1/4" HEX HD CAP GR5 ZP
LOCKWASHER, 1/2" HELICAL ZP
DECAL, SAFETY CHAIN WARNING (Not Shown)
5TH WHEEL & KING PIN ADAPTER
RETAINER PIN ASSEMBLY
-1
4
4
1
1
2
--
28
29
30
--
0400177
0400491
0804396
124002431TRAILER BALL KIT
SCREW, 1/2"-13 X 1-1/4" HEX HD CAP GR5 ZP
LOCKWASHER, 1/2" HELICAL ZP
TRAILER BALL BRACKET WELDMENT
-2
2
1
I-27
Section I - PARTS (cont'd)
ROTATOR PINLOCK ASSEMBLY
I-28
Section I - PARTS (cont'd)
ROTATOR PINLOCK ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PART NUMBER
0200052
0302231
0306698
0307612
0400388
0400401
0400540
0400543
0400663
0400664
0400666
0402117
0705698
0709331
0718297
0718298
0807396
DESCRIPTION
CLEVIS LINK
ADJ CLEVIS, 3/8”
AIR CYLINDER
NYLON SPACER, 5/16” THK X 5/16” ID HEX NUT, 3/8”-24
7/16-20 HEX JAM NUT ZP
COTTER PIN, 3/32” X 1”
COTTER PIN, 1/8” X 3/4”
CLEVIS PIN - 1/4 X 1-3/4 ZP
CLEVIS PIN - 5/16 X 1-3/4 ZP
CLEVIS PIN - 5/16 X 1-3/8 ZP
5/16 FLATWASHER 316SS
ALLTHREAD, CONNECTOR
RETAINING PIN, HOUSE LOCK
BAR LINK - PIN LOCK
BAR LEVER - PIN LOCK
PIN LOCK WELDMENT
I-29
QTY
1
1
1
6
2
1
1
5
1
2
2
11
1
1
4
1
1
Section I - PARTS (cont'd)
1140 3-STAGE RECOVERY BOOM ASSEMBLY
I-30
Section I - PARTS (cont'd)
1140 3-STAGE RECOVERY BOOM ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
PART NUMBER
0300113
0302220
0302792
0303490
0305023
0306825
0307061-LH
0307061-RH
0307406
0310381
0400066
0400078
0400114
0400126
0400132
0400146
0400180
0400206
0400262
0400307
0400333
0400336
0400349
0400367
0400382
0400392
0400408
0400426
0400437
0400448
0400451
0400452
0400473
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
SLEW RING, 1060S
HYD CYLINDER
WEAR PAD (1/2 X 1 X 4)
SNAP RING 5100-0225PP
PAD - WEAR
DP 35K OVERWIND WINCH - LH
DP 35K OVERWIND WINCH - RH
SLIDE PAD
ALARM SWING W/ STAR NUTS
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 2 HHCS GR5 ZP
5/16-18 X 3 HHCS GR 5 ZP
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
3/8-16 X 2-1/4 HHCS GR.5 ZP
1/2-16 X 6 HHCSCS GR5 ZP
1/2-13 X 5 HHCS GR.5, ZP
5/8-11 X 2 1/2 HHCS GR.8,ZP
7/8-9 X 4 HHCS GR.8 GOLD
1-8 X 4-1/2 HHCS GR8 ZP
1-8 X 3 HHCS GR8 ZP
SCREW, 3/8”-16 X 3/4” FL HD SKT
1/4-20 NYLOCK HEX NUT ZP
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
5/8-11 NYLOCK NUT GR.8 ZP
7/8-9 NYLOCK HEX NUT GR.8 ZP
1-1/4-12 HEX JAM NUT 1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
7/8 FLATWASHER HARDENED
I-31
QTY
18
1
2
2
2
4
1
1
1
1
12
6
2
20
8
1
1
2
16
16
40
38
14
8
2
9
3
18
16
2
16
12
18
Section I - PARTS (cont'd)
1140 3-STAGE RECOVERY BOOM ASSEMBLY (cont'd)
I-32
Section I - PARTS (cont'd)
1140 3-STAGE RECOVERY BOOM ASSEMBLY (cont'd)
ITEM
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
PART NUMBER
0400480
0400482
0400503
0400522
0400587
0705104
0706042
0706043
0708094
0712380
0717262
0717746
0717747
0718134
0719162
0719585
0722067
0722103
0722104
0722817
0722820
0807401
0807402
0807403
0807404
0906535
0908119
9044409
9044434
916040004
945351500
946030004
GA0215
DESCRIPTION
QTY
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
5/8 FLAT WASHER GR.8
1 1/16 X 2 X 1/8 HARDENED FLAT WASHER ZP
1/4 X 1-1/2 ROLL PIN ZP
PLATE - SUPPORT
CABLE WING, LONG 1040 & 1040B
CABLE WING - MED
PIN - LIFT CYLINDER
“D” RING
SHIM - SLIDE PAD
PLATE - SLIDE PAD SUPPORT
PIN - CABLE RETRACT
PLATE - SLIDE PAD SUPPORT
PLATE, ACCESS COVER
“D” RING - TOWING
PIN “D” RING
PIN BOOM PIVOT
ANGLE WINCH MOUNTING
PIN, ‘D’ RING
PIN, ‘D’ RING
WRECKER FRAME WELDMENT
OUTER BOOM WELDMENT
MID STAGE BOOM WELDMENT
INNER BOOM TUBE WLMT
SWIVEL ASSEMBLY
EXTENSION SYSTEM
5/8-11 X 2-1/4 HHCS GR8 ZP
3/8-16X1 NC FLAT
WEAR PAD ~ LOWER
PIN WELD’T - LOWER LIFT CYL
UPPER WEAR PAD - RECOVERY
PIN, D RING
2
20
18
78
2
1
2
1
2
4
10
4
1
2
2
2
2
1
4
1
1
1
1
1
1
2
1
2
4
1
2
2
1
I-33
Section I - PARTS (cont'd)
1140 3-STAGE EXTENSION SYSTEM ASSEMBLY
I-34
Section I - PARTS (cont'd)
1140 3-STAGE EXTENSION SYSTEM ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
PART NUMBER
0300113
0301388
0303441
0305023
0307160
0307402
0307403
0307432
0400146
0400177
0400223
0400264
0400349
0400392
0400421
0400448
0400461
0400471
0400472
0400473
0400480
0400483
0400491
0400501
0400587
0717743
0717744
0717747
0717909
0806721
0806722
0806752
GA0215
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
ELBOW, 8MJ-8MB90
SHEAVE, 10”
SNAP RING 5100-0225PP
CABLE - EXT ASSY 3-STAGE BOOM
CYLINDER - BOOM EXTEND
CABLE - ASSY (RETRACT) 3-STAGE
BUSHING - BRONZE
3/8-16 X 2-1/4 HHCS GR.5 ZP
1/2-13 X 1 1/4 HHCS GR. 5, ZP
3/8-16 X 3/4 FL. HD. SOCKET SCREW
5/8-11 X 2-1/4 HHCS GR5 ZP
SCREW, 3/8”-16 X 3/4” FL HD SKT
3/8-16 NYLOCK HEX NUT ZP
5/8-11 NYLOCK HEX NUT ZP
1-1/4-12 HEX JAM NUT 1-1/4-12 NEX NUT GR8 ZP
7/8-14 UNF HEX NUT
7/8-14 UNF HEX NUT JAM
7/8 FLATWASHER HARDENED
3/8 FLAT WASHER ZP
LOCKWASHER, 3/8” COUNTERSUNK
1/2 HELICAL LOCK WASHER ZP
WASH - SAE 1 1/4 HARDENED PL
1/4 X 1-1/2 ROLL PIN ZP
ROD - EXTEND SHEAVE SPACER
PIN - EXTEND CYLINDER
PIN - CABLE RETRACT
SHEAVE - 5 “ DIA RETRACT
EXTEND SHEAVE BRACKET WELDMENT
SHAFT EXTENSION SHEAVE WELDMENT
SHAFT - RETRACT SHEAVE WELDMENT
PIN, D RING
I-35
QTY
6
2
2
2
2
1
2
4
1
4
1
4
4
1
4
2
2
2
2
2
2
1
4
2
2
2
1
1
4
1
1
4
1
Section I - PARTS (cont'd)
1140 3-STAGE RECOVERY BOOM HYDRAULICS
I-36
Section I - PARTS (cont'd)
1140 3-STAGE RECOVERY BOOM HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART NUMBER
0300041
0300644
0300787
0301388
0301471
0301529
0302275
0302276
0302568
0302574
0302792
0302796
0307107
0307402
0307613
0400078
0400367
0400451
0703001
DESCRIPTION
CONNECTOR 8MJX8MB
HOSE CLAMP, 8”
HOSE ASSEMBLY - 53” LG
ELBOW, 8MJ-8MB90
HOSE ASSEMBLY - 30” LG
HOSE ASSEMBLY - 58 LG.
CONNECTOR 8MJX6MB
ELBOW, 8MJ-6MB90
HYDRAULIC TUBING
FITTING - BULKHEAD - RUN TEE W/NUT
HYD CYLINDER
BRANCH TEE, 8MJ-8MJ-8FJX
VALVE HOLDING 4000 PSI SAE
CYLINDER - BOOM EXTEND
HYDRAULIC TUBING ASSY - 1/2” DIA
1/4-20 X 2 HHCS GR5 ZP
1/4-20 NYLOCK HEX NUT ZP
1/4 FLAT WASHER ZP
BRACKET - MOUNTING
I-37
QTY
2
2
4
4
2
2
2
4
2
2
2
2
2
1
2
4
4
4
2
Section I - PARTS (cont'd)
1140 RECOVERY BOOM FRAME HYDRAULICS
I-38
Section I - PARTS (cont'd)
1140 RECOVERY BOOM FRAME HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART NUMBER
0300387
0300659
0301376
0301388
0301471
0302052
0302574
0303994
0307106
0307460
0310318
0310334
0310335
0310336
0310337
0310371
0310634
0722689
HC1291
DESCRIPTION
PLUG - 1/2 SAE O-RING
HOSE ASSY - 8FJX-8C2AT-8FJX 45” LG
CONNECTOR 8MJX10MB
ELBOW, 8MJ-8MB90
HOSE ASSEMBLY, 30” LG.
RUN TEE, 8MJ-8MJ-8FJX
FITTING - BULKHEAD - RUN TEE W/NUT
HOSE ASSY - 6FJX-4C2AT-4FJX90 22” LG
CONNECTOR 4MBX6FB
FITTING, ELBOW,6MJ-6MB90L
SWITCH PRESSURE
PLANETARY GEARBOX - 1040S
HYDRAULIC MOTOR, PARKER
VALVE - DIVERTER
SWING CONTROL VALVE
INLINE SWIVEL – 8MJ BULKHEAD
FITTING ADAPTER
PLATE - HYDRAULIC SWIVEL MOUNTING
CONNECTOR, 4MJ-4MB STR
I-39
QTY
2
2
6
4
6
3
2
1
1
1
1
1
1
2
1
7
1
1
1
Section I - PARTS (cont'd)
1140 VALVE TO BOOM FRAME HYDRAULICS
I-40
Section I - PARTS (cont'd)
1140 VALVE TO BOOM FRAME HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
0301376
0301445
0301763
0302827
0302828
0303176
0310371
0310372
0310600
0722689
DESCRIPTION
CONNECTOR 8MJX10MB
CONNECTOR, 8MJ-8MBL
H.P.C.O. ADAPTER
CONNECTOR 10MJX10MB
CONNECTOR 10MJX10MBL
CONNECTOR 10MPX8FB
INLINE SWIVEL – 8MJ BULKHEAD
INLINE SWIVEL - 10MJ BULKHEAD
VALVE, 4 SPOOL
PLATE - HYDRAULIC SWIVEL MOUNTING
I-41
QTY
3
3
2
3
3
3
7
4
2
1
Section I - PARTS (cont'd)
1130 RECOVERY FRAME ASSEMBLY
I-42
Section I - PARTS (cont'd)
1130 RECOVERY FRAME ASSEMBLY
ITEM
PART NUMBER
0302220
0306747
0400066
0400180
0400206
0400262
0400307
0400333
0400336
0400408
0400426
0400437
0400451
0400452
0400473
0400503
0400522
0708094
0719162
0722103
0722104
0807639
9048248
9048248_RH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
DESCRIPTION
QTY
SLEW RING, 1060S
CYL - BOOM LIFT
1/4-20 X 3/4 HHCS GR.5,ZP
1/2-16 x 6 HHCSCS GR5 ZP
1/2-13 X 5 HHCS GR.5, ZP
5/8-11 X 2 1/2 HHCS GR.8,ZP
7/8-9 x 4 HHCS GR.8 GOLD
1-8 x 4-1/2 HHCS GR8 ZP
1-8 x 3 HHCS GR8 ZP
1/2-13 NYLOCK HEX NUT ZP
5/8-11 NYLOCK NUT GR.8 ZP
7/8-9 NYLOCK HEX NUT GR.8 ZP
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
7/8 FLATWASHER HARDENED
5/8 FLAT WASHER GR.8
1 1/16 x 2 x 1/8 HARDENED FLAT WASHER ZP
PIN - LIFT CYLINDER
PLATE, ACCESS COVER
PIN BOOM PIVOT
ANGLE WINCH MOUNTING
WRECKER FRAME WELDMENT
WINCH DP 2-SPD 25K NARROW DRUM
WINCH DP 2-SPD 25K NARROW DRUM
1
2
4
2
2
16
16
40
38
4
16
16
4
4
16
16
78
2
2
1
4
1
1
1
I-43
Section I - PARTS (cont'd)
1130 RECOVERY BOOM ASSEMBLY
I-44
Section I - PARTS (cont'd)
1130 RECOVERY BOOM ASSEMBLY
ITEM
PART NUMBER
3012-793001
0301895
0302276
0303490
0306743
0400078
0400122
0400126
0400132
0400133
0400204
0400349
0400367
0400392
0400426
0400482
0400503
0706042
0706043
0712380
0715951
0715952
0719585
0722817
0722957
0807636
0807637
0906532
9012549
9012552
9012584
9044409
915040501
930100002
930105000
945030001
945030004
945351500
HD0151
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
DESCRIPTION
PLATE - LUBE MOUNT
GREASE FITTING, 1/8 NPT STRAIGHT
ELBOW, 8MJ-6MB90
WEAR PAD (1/2 X 1 X 4)
CYLINDER, BOOM EXTEND
1/4-20 X 2 HHCS GR5 ZP
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
3/8-16 X 3 HHCS GR.5,ZP
1/2-13X3/4 SKT HD SET
SCREW, 3/8”-16 X 3/4” FL HD SKT
1/4-20 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
5/8-11 NYLOCK NUT GR.8 ZP
3/8 HELICAL LOCK WASHER ZP
5/8 FLAT WASHER GR.8
CABLE WING, LONG 1040 & 1040B
CABLE WING - MED
“D” RING
PIN - EXT CYL BASE
PIN - EXT CYL ROD
“D” RING - TOWING
PIN, ‘D’ RING
PIN “D” RING
OUTER BOOM WLMT
1130 INNER BOOM WELDMENT
SWIVEL BOOM ASSEMBLY
CONNECTOR, 3/8 TUBE X 1/8 NPT
BULKHEAD COUPLING, 1/8 ELBOW, 1/4 NPT X 3/8 TUBE 90
5/8-11 X 2-1/4 HHCS GR8 ZP
BOTTOM CLAMP ANGLE - EXT. CYL. ASSY
LOWER WEAR PAD - RECOVERY
SPIDER CLAMP - TOP WLMT
PAD RETAINING PLATE
WEAR PAD (UPPER)
PIN WELD’T - LOWER LIFT CYL
SNAP RING - 2” INTERNAL
I-45
QTY
1
1
2
2
1
1
2
2
4
2
4
2
1
6
2
2
2
1
1
2
1
1
2
1
2
1
1
2
1
1
1
2
2
1
1
1
1
2
4
Section I - PARTS (cont'd)
1130 RECOVERY BOOM HYDRAULICS
I-46
Section I - PARTS (cont'd)
1130 RECOVERY BOOM HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART NUMBER
0300041
0300644
0300787
0301388
0301471
0301529
0302275
0302276
0302568
0302574
0306747
0302796
0307107
0306743
0307614
0400078
0400367
0400451
0703001
DESCRIPTION
CONNECTOR 8MJX8MB
HOSE CLAMP, 8”
HOSE ASSEMBLY - 53” LG
ELBOW, 8MJ-8MB90
HOSE ASSEMBLY - 30” LG
HOSE ASSEMBLY - 58 LG.
CONNECTOR 8MJX6MB
ELBOW, 8MJ-6MB90
HYDRAULIC TUBING
FITTING - BULKHEAD - RUN TEE W/NUT
HYD CYLINDER
BRANCH TEE, 8MJ-8MJ-8FJX
VALVE HOLDING 4000 PSI SAE
CYLINDER - BOOM EXTEND
HYDRAULIC TUBING ASSY - 1/2” DIA
1/4-20 X 2 HHCS GR5 ZP
1/4-20 NYLOCK HEX NUT ZP
1/4 FLAT WASHER ZP
BRACKET - MOUNTING
I-47
QTY
2
2
4
4
2
2
2
4
2
2
2
2
2
1
2
4
4
4
2
Section I - PARTS (cont'd)
1130 RECOVERY BOOM FRAME HYDRAULICS
I-48
Section I - PARTS (cont'd)
1130 RECOVERY BOOM FRAME HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART NUMBER
0300387
0300659
0301376
0301388
0301471
0302052
0302574
0303994
0307106
0307460
0310318
0307651
515-000101
0310336
512-080001
0310371
0310634
0722689
HC1291
DESCRIPTION
PLUG - 1/2 SAE O-RING
HOSE ASSY - 8FJX-8C2AT-8FJX 45” LG
CONNECTOR 8MJX10MB
ELBOW, 8MJ-8MB90
HOSE ASSEMBLY, 30” LG.
RUN TEE, 8MJ-8MJ-8FJX
FITTING - BULKHEAD - RUN TEE W/NUT
HOSE ASSY - 6FJX-4C2AT-4FJX90 22” LG
CONNECTOR 4MBX6FB
FITTING, ELBOW,6MJ-6MB90L
SWITCH PRESSURE
PLANETARY GEARBOX
HYDRAULIC MOTOR, PARKER
VALVE - DIVERTER
SWING CONTROL VALVE
INLINE SWIVEL – 8MJ BULKHEAD
FITTING ADAPTER
PLATE - HYDRAULIC SWIVEL MOUNTING
CONNECTOR, 4MJ-4MB STR
I-49
QTY
2
2
6
4
6
3
2
1
1
1
1
1
1
2
1
7
11
1
1
Section I - PARTS (cont'd)
1130 VALVE TO BOOM FRAME HYDRAULICS
I-50
Section I - PARTS (cont'd)
1130 VALVE TO BOOM FRAME HYDRAULICS
ITEM
1
2
3
4
5
6
7
PART NUMBER
0300041
0301445
0300286
0310371
0310372
0310678
0722689
DESCRIPTION
CONNECTOR 8MJX8MB
CONNECTOR, 8MJ-8MBL
H.P.C.O. ADAPTER
INLINE SWIVEL – 8MJ BULKHEAD
INLINE SWIVEL - 10MJ BULKHEAD
VALVE, 4 SPOOL
PLATE - HYDRAULIC SWIVEL MOUNTING
I-51
QTY
6
6
2
7
4
2
1
Section I - PARTS (cont'd)
WINCH HYDRAULICS
I-52
Section I - PARTS (cont'd)
WINCH HYDRAULICS
ITEM
1
2
3
4
5
6
7
PART NUMBER
0301388
0302508
0307061-LH
9048248
0307061-RH
9048248
0310372
0310581
0722689
DESCRIPTION
QTY
ELBOW, 8MJ-8MB90
ELBOW, 8MJ-8MB90LL
DP 35K OVERWIND WINCH - LH (1140)
WINCH 2-SPD DP 25K NARROW DRUM (1130)
DP 35K OVERWIND WINCH - RH(1140)
WINCH 2-SPD DP 25K NARROW DRUM (1130)
INLINE SWIVEL - 10MJ BULKHEAD
HOSE ASSY-8FJX-10M3KXTF-10FJX90S 96”LG
PLATE - HYDRAULIC SWIVEL MOUNTING
2
2
1
1
1
1
4
4
1
I-53
Section I - PARTS (cont'd)
SWING LIMIT VALVE ASSEMBLY
ITEM
PART NUMBER
561-0380002
0300387
0301388
0302052
0310336
0310565
0400132
0400367
0400392
0402046
0402120
0402122
0402123
0721687
0721688
9041010
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DESCRIPTION
BUSHING
PLUG - 1/2 SAE O-RING
ELBOW, 8MJ-8MB90
RUN TEE, 8MJ-8MJ-8FJX
VALVE - DIVERTER
SPACER - 3/8 ID X 3/4 OD X 3/16
3/8-16 X 1 1/2 HHCS GR.5,ZP
1/4-20 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
3/8-16 X 2 HHCS SS
3/8 FLATWASHER 316 SS
HEX NUT 316 STAINLESS
3/8-16 NYLOCK HEX NUT SS
PLATE - SWING LIMIT CAM
ANGLE - SWING LIMIT MOUNTING
1/4-20NC X 2.25 GR8 ZP
I-54
QTY
1
2
4
1
2
2
2
6
2
1
3
1
1
3
1
6
Section I - PARTS (cont'd)
BOOM SWIVEL ASSEMBLY
ITEM
PART NUMBER
DESCRIPTION
QTY
--
1
2
3
4
5
6
7
8
9
0906535
0300113
0300311
0400133
0400140
0400392
0700511
0700563
0802027
0804450
BOOM SWIVEL ASSEMBLY (1140) GREASE FITTING, 1/4"-28 STRAIGHT
SHEAVE, 12-101BB 10
SCREW, 3/8"-16 X 3" HEX HD CAP GR5 ZP
SCREW, 3/8"-16 X 4" HEX HD CAP GR5 ZP
NUT, 3/8"-16 NYLOK HEX ZP
GUIDE, BOTTOM CABLE
SHEAVE SHAFT
CABLE GUIDE WELDMENT
BOOM END SWIVEL WELDMENT
-2
2
2
4
6
4
2
2
2
--
1
2
3
4
5
6
7
8
9
0906532
0300113
0303441
0400133
0400150
0400392
0700801
0716134
0803313
0804449
BOOM SWIVEL ASSEMBLY (1130) GREASE FITTING, 1/4"-28 STRAIGHT
SHEAVE, 10" 1-1/2" BORE
SCREW, 3/8"-16 X 3" HEX HD CAP GR5 ZP
SCREW, 3/8"-16 X 2-1/2" HEX HD CAP GR5 ZP
NUT, 3/8"-16 NYLOK HEX ZP
GUIDE, BOTTOM CABLE
SHEAVE SHAFT
CABLE GUIDE WELDMENT
BOOM END SWIVEL WELDMENT
-2
2
2
4
6
4
2
2
2
I-55
Section I - PARTS (cont'd)
1140 PUMP, VALVE & FILTER HYDRAULICS
I-56
Section I - PARTS (cont'd)
1140 PUMP, VALVE & FILTER HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
PART NUMBER
0300041
0300058
0300364
0300400
0300649
0300666
0300671
0300891
0301373
0301388
0301545
0301620
0301695
0301965
0302085
0302088
0302170
0302242
0302510
0302511
0302901
0302932
0303330
0303339
0303763
0306901
0307119
0307424
0307472
0310358
0310495
0310501
0310520
0310600
0310699
9018016
DESCRIPTION
CONNECTOR 8MJX8MB
SUCTION HOSE, 1” I.D. 16C4
HOSE CLAMP, 7/8” TO 2-3/4”
CONNECTOR, 12MJ-12MB
CONNECTOR, 12MJ-12MJ
BARB, 24C4-24MP
SUCTION HOSE, 1-1/2” I.D. 100R4
PIPE NIPPLE - 1-1/2 X 3
BUSHING, 2MP-1-1/2FP
ELBOW, 8MJ-8MB90
ELBOW, 12MJ-12MB90
FITTING, ELBOW, 6MJ-6MB90
HOSE ASSY - 91” LG.
HOSE ASSY - 131” LG.
FITTING 12MJ-10MB90
BALL VALVE - 1 1/2 BRONZE
BENT TUBE SWIVEL,16C2-16FJX90S
ELBOW, 24HOSE-24FL90
CONNECTOR, 6MJ-6MBL
VALVE, 4 SPOOL VDP12CDDD10
HOSE - HYD ASSY 120” LG
FITTING ~ 12MJ-20FL 90
HOSE - HYD ASSY 40” LG
HOSE ASSY - 45” LG.
HOSE ASSEMBLY - 94”
PLUG - 3/4 SAE O-RING HEX SOC
HYDR. PUMP - P350B242JEAB20-7MHAB20-1
BRANCH TEE, 16MJ-16MJ-16FJX
HOSE - HYD ASSY 24” LG
VALVE - SOLENOID 12V OUTRIG CTRL
VALVE-N/C PROPORTIONAL
VALVE - OUTRIGGER DIVERTER
ADAPTER,TEE, 12MJ-12MJ-12MB, MALE
VALVE, 4 SPOOL
HOSE ASSY - 31” LG.
HOSE CLAMP, HS-20 1-1/4”
I-57
QTY
1
4
4
4
2
2
4
2
2
1
4
2
1
1
3
2
4
2
5
1
4
2
4
1
1
4
1
2
2
1
2
1
2
2
2
4
Section I - PARTS (cont'd)
1130 PUMP, VALVE & FILTER HYDRAULICS
I-58
Section I - PARTS (cont'd)
1130 PUMP, VALVE & FILTER HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
PART NUMBER
0300041
0300058
0300364
0300400
0300666
0300671
0300891
0301373
0301388
0301545
0301620
0301695
0301965
0302082
0302085
0302088
0302170
0302242
0302510
0302511
0302842
0302932
0303176
0303330
0303339
0303763
0306901
0307119
0307424
0301659
0310358
0310476
0310501
0310678
0310699
9018016
DESCRIPTION
CONNECTOR 8MJX8MB
SUCTION HOSE, 1” I.D. 16C4
HOSE CLAMP, 7/8” TO 2-3/4”
CONNECTOR, 12MJ-12MB
BARB, 24C4-24MP
SUCTION HOSE, 1-1/2” I.D. 100R4
PIPE NIPPLE - 1-1/2 X 3
BUSHING, 2MP-1-1/2FP
ELBOW, 8MJ-8MB90
ELBOW, 12MJ-12MB90
FITTING, ELBOW, 6MJ-6MB90
HOSE ASSY - 91” LG.
HOSE ASSY - 131” LG.
FITTING 12MJ-10MB90
FITTING, ADAPTER 12MJ-10MB90
BALL VALVE - 1 1/2 BRONZE
BENT TUBE SWIVEL,16C2-16FJX90S
ELBOW, 24HOSE-24FL90
CONNECTOR, 6MJ-6MBL
VALVE, 4 SPOOL VDP12CDDD10
FITTING, TEE
FITTING, 12MJ-20FL 90
CONNECTOR 10MPX8FB
HOSE - HYD ASSY 40” LG
HOSE ASSY - 45” LG.
HOSE ASSEMBLY - 94”
PLUG - 3/4 SAE O-RING HEX SOC
HYDR. PUMP - P350B242JEAB20-7MHAB20-1
BRANCH TEE, 16MJ-16MJ-16FJX
HOSE - HYD ASSY 24” LG
VALVE - SOLENOID 12V OUTRIG CTRL
VALVE-N/C PROPORTIONAL
VALVE - OUTRIGGER DIVERTER
VALVE, 4 SPOOL
HOSE ASSY - 31” LG.
HOSE CLAMP, HS-20 1-1/4”
I-59
QTY
1
4
4
2
2
4
2
2
1
4
2
1
1
3
3
2
4
2
5
1
2
2
2
4
1
1
4
1
2
1
1
2
1
2
2
4
Section I - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
I-60
Section I - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
ITEM
--
1
2
3
4
5
6
PART NUMBER
0906412
0306698
0400057
0400367
0400401
0400527
0803181
DESCRIPTION
8 FUNCTION AIR ASSEMBLY
AIR CYLINDER, 1.5 BORE X 1.71 STROKE
SCREW, 1/4"-20 X 1-1/4" HEX HD CAP
NUT, 1/4"-20 NYLOK HEX ZP
NUT, 7/16"-20 HEX JAM PL
CLEVIS PIN, 5/16" X 5/8"
CLEVIS WELDMENT
QTY
-4
4
4
4
4
4
--
0908138
LEFT CONTROL ASSEMBLY (10 HANDLE)
7
FC41
FITTING, 90DEG BLKHD ELB
8
0301473
HOSE, HYDRAULIC 18" (Not Shown)
9
0301884
CONTROL CABLE, 96"
10
0302205
GAUGE, FLUSH MOUNT 6000 PSI
11
0302457
CONTROL CABLE, 104"
12
0302577
FITTING 6MJ-4FP (Not Shown)
13
0302726
GREASE FITTING, 1/4"-28
14
0400066
SCREW, 1/4"-20 X 3/4" HEX HD CAP GR5 ZP
15
0400367
NUT, 1/4"-20 NYLOK HEX ZP
16
0400383
NUT, 5/16"-24 HEX ZP (Not Shown)
17
0400532
CLEVIS PIN, 5/16" X 1" ZP
18
0400541
COTTER PIN, 1/16" X 3/4"
19
0711235
SHAFT CLAMP, CONTROL BOX
20
0717206
SPACER TUBE, 1-1/4" OD
21
0717270
CONTROL HANDLE PIN
22
0717461
PLATE, SUPPORT SHAFT
23
0806006
CLEVIS WELDMENT
24
0806009
CONTROL FRAME WELDMENT
--
0907441
CONTROL HANDLE ASSEMBLY, SHORT
25
0806515
CONTROL HANDLE WELDMENT
26
9053524
BEARING BR. FLG.752 X .879x.75,
2 EACH ON HANDLES AND SPACERS
27
0400453
WASHER, 1/4" FLAT
28
8
0400452LOCKWASHER, 1/4" HELICAL
-1
1
6
1
4
1
10
8
8
10
10
10
2
1
1
2
10
1
10
1
22
--
29
30
31
-2
1
1
0908847
0307604
0300835
0300837
KNOB, DECAL & PANEL KIT (10 HANDLE)
KNOB, RED LONG SK0700-07
KNOB, BOOM (UP-DOWN)
KNOB, BOOM (IN-OUT)
I-61
4
Section I - PARTS (cont'd)
LEFT CONTROL ASSEMBLY (cont'd)
I-62
Section I - PARTS (cont'd)
LEFT CONTROL ASSEMBLY (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
0908847
0302856
0303379
0303380
0303381
0303382
0303941
0307166
0307778
0310021
0310022
0717208
0400382
0400107
0400005
0400369
0400380
0400393
0400071
0402111
0402110
0908822
0908823
0909056
0719849
0719592
9024041
KNOB, DECAL & PANEL KIT (cont'd)
KNOB, TILT (UP-DOWN)
KNOB, SWING (CW-CCW)
KNOB, UNDERLIFT (IN-OUT)
KNOB, UNDERLIFT (UP-DOWN)
KNOB, FOLD (UP-DOWN)
PLUG, 2-1/2"
PLUG, 7/8" (Not Shown)
PLUG, FILTER
PIGTAIL, PWR-SWITCH (Not Shown)
PIGTAIL, GND-SWITCH (Not Shown)
SPACER TUBE 1-1/4" OD
NUT, 5/16"-18 NYLOK HEX
SCREW 5/16"-18 X 2-1/2" HEX HD CAP GR5 ZP
SCREW, #6-32 X 1/2" RD HD PH SS
NUT, 1/4" "J" TYPE TINNERMAN
NUT, 5/16"-18 "J" TINNERMAN
NUT, 3/8"-16 HEX JAM ZP
SCREW, 1/4"-20 X 3/4" RD PHIL HD SS
WASHER, 1/4" FLAT SS
LOCKWASHER, 1/4" 316 SS
ILLUMINATED LEGEND ASSEMBLY, LOWER
ILLUMINATED LEGEND ASSEMBLY, UPPER
ILLUMINATED LEGEND ASSEMBLY, SIDE
PANEL, GAUGE (12 HANDLE)
PLATE, CONTROL (12 HANDLE)
SWITCH, McGILL 0852-0110
-1
1
1
1
1
1
2
5
2
2
1
4
4
3
6
8
20
8
8
8
1
1
1
1
1
13
--
58
59
0908135
0306540
0306565
PROPORTIONAL CONTROL KIT W/ DW
ROTARY SELECT SWITCH OPERATOR
PUSH BUTTON OPERATOR W/MTG (BLUE)
-6
1
--
60
61
0908137
0307456
0806759
PROPORTIONAL CONTROL VALVE KIT
CLEVIS PIN, 3/16" X 3/4" ZP
VALVE LINK WELDMENT
-10
10
I-63
Section I - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY (OPTIONAL)
I-64
Section I - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY (OPTIONAL)
ITEM
--
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
--
18
19
--
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
PART NUMBER
0909004
0301969
0302457
0302726
0303253
0400066
0400367
0400383
0400393
0400532
0400540
0711235
0717207
0717209
0717203
0717461
0806006
0806008
0907441
0806515
9053524
0909002
0300836
0300838
0303380
0307605
0400067
0400062
0400103
0400107
0400382
0400463
0400367
0400370
0400379
0400393
0400072
0402112
0402111
0400467
0400466
0909051
DESCRIPTION
RIGHT CONTROL ASSEMBLY (8 HANDLE)
CONTROL CABLE, 84"
CONTROL CABLE, 104"
GREASE FITTING, 1/4"-28
TERMINAL .187" FEM QD (Not Shown)
SCREW, 1/4"-20 X 3/4" HEX HD CAP GR5 ZP
NUT, 1/4"-20 NYLOK HEX ZP
NUT, 5/16"-24 HEX ZP CABLE END
NUT, 3/8"-16 HEX JAM ZP
CLEVIS PIN, 5/16" X 1" ZP
COTTER PIN, 1/16" X 3/4"
SHAFT CLAMP, CONTROL BOX
SPACER TUBE, 1-1/4" OD
SPACER TUBE, 1-1/4" OD
CONTROL HANDLE PIN (6)
PLATE, SUPPORT SHAFT
CLEVIS WELDMENT
CONTROL FRAME WELDMENT (6,7,8 HND)
CONTROL HANDLE ASSEMBLY, SHORT
CONTROL HANDLE WELDMENT
BEARING BR. FLG .752 X .879 X .75
KNOB, DECAL & PANEL KIT (8 HDL/8 SW)
KNOB-BOOM (UP-DOWN)
KNOB-BOOM (IN-OUT)
KNOB, SWING CW-CCW
KNOB, RED LONG-SK0700-07
SCREW, 1/4"-20 X 3/4" MACH SCREW 2
SCREW, 1/4"-20 X 3/4" THRD CUT HEX
SCREW, 5/16"-18 X 1" RD MACH HD SS
SCREW, 5/16"-18 X 2-1/2" HHC GR5 ZP
5/16-18 NUTS
5/16” FLAT WASHER
NUT, 1/4"-20 NYLOK HEX ZP (Not Shown)
NUT, 1/4" "J" TYPE TINNERMAN
NUT, 5/16"-18 "J" TINNERMAN
NUT, 3/8"-16 HEX JAM ZP (Not Shown)
SCREW, 1/4"-20 X 3/4" RND MACH HD SS
LOCKWASHER, 1/4" SS
WASHER, 1/4" FLAT SS
LOCKWASHER, 5/16" SS
WASHER, FLAT 5/16" SS
ILLUMINATED LEGEND ASSEMBLY, LOWER
I-65
QTY
-3
5
8
4
2
2
12
8
8
5
2
1
1
1
1
8
1
8
1
14
-1
1
1
2
3
12
8
4
4
4
12
1
8
7
4
4
4
8
8
1
Section I - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY (OPTIONAL) (cont'd)
I-66
Section I - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY (OPTIONAL) (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
40
41
42
43
44
45
46
47
--
48
49
0909002
0909056
0909053
0719248
0719247
0307779
0400455
0400454
9024041
0908135
0306541
0306565
KNOB, DECAL & PANEL KIT (cont'd)
ILLUMINATED LEGEND ASSEMBLY, OUTRIGGER1
ILLUMINATED LEGEND ASSEMBLY, UPPER
1
PANEL, GAUGE (8 HANDLE)
1
PLATE, CONTROL (8 HANDLE)
1
PLUG, FILLER
4
LOCKWASHER, 1/4"
3
WASHER, FLAT
3
SWITCH, McGILL 0852-0110
4
PROPORTIONAL CONTROL KIT W/ DW
-ROTARY SELECT SWITCH OPERATOR
6
PUSH BUTTON OPERATOR W/MTG (BLUE)
1
--
50
51
52
0908137
0307456
0806759
0806738
PROPORTIONAL CONTROL VALVE KIT
CLEVIS PIN, 3/16" X 3/4" ZP
VALVE LINK WELDMENT (HUSCO)
CONNECTOR, CABLE CONTROL (Not Shown)
0908845
0307822
0400070
0400101
0400126
0400366
0400367
0400392
0400451
0400452
0400458
0400463
0400464
0400480
0710198
0714324
0714325
0717499
0719115
0806928
0807079
0310021
0310022
REMOTE TRAY ASSEMBLY
-PIN SWITCH (Not Shown)
1
1/4-20 X 1 HHCS GR5 ZP
7
SCREW, 5/16-18 RD HD SLOTTED SS
4
3/8-16 X 1 HHCS, GR5 ZP
4
1/4-20 HEX NUT ZP (Not Shown)
2
1/4-20 NYLOCK HEX NUT ZP
7
3/8-16 NYLOCK HEX NUT ZP
4
1/4 FLAT WASHER ZP
14
1/4 HELICIAL LOCK WASHER ZP
6
1/4 STAR LOCKWASHER ZP (Not Shown)
1
5/16 FLAT WASHER ZP
4
5/16 HELICAL FLAT WASHER ZP
4
3/8 FLAT WASHER ZP
8
BRACKET, MRKR LT & HAND HELD REMOTE
2
SUPPORT, LEFT CONTROL
1
SUPPORT, RIHT CONTROL
1
ANGLE MTG WORK LIGHT BOOM (Not Shown) 1
PANEL, CONTROL STATION UPPER REMOTE 1
CONTROL PANEL WELDMENT
1
PANEL SPACER WELDMENT REMOTE BOX
1
PIGTAIL, PWR-SWITCH (Not Shown)
1
PIGTAIL, GND-SWITCH (Not Shown)
1
--
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
I-67
-8
8
8
Section I - PARTS (cont'd)
FRONT OUTRIGGER VERTICAL ASSEMBLY
I-68
Section I - PARTS (cont'd)
FRONT OUTRIGGER VERTICAL ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART NUMBER
0300329
0301470
0310397
0310479
0310480
0400122
0400367
0400392
0722169
0722170
0722173
0722381
0807446
0807447
0807449
0910188
9041010
HD0151
DESCRIPTION
QTY
SNAP RING, EXT 2”
ELBOW, 6MJ-8MB90
VALVE - DIVERTER WALVOIL
CYLINDER - OUTRIGGER
BULKHEAD 3NJ-BLKHD UNION W/ NUT
3/8-16 X 1 1/4 HHCS GR.5 ZP
1/4-20 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
PIN OUTRIGGER CYLINDER BASE
PIN OUTRIGGER CYLINDER ROD
PLATE CAM VALVE MOUNTING
ANGLE BULKHEAD
FRONT LT O/R VERTICAL OUTER WLMT
FRONT RT O/R VERTICAL OUTER WLMT
FRONT OUTRIGGER VERTICAL INNER WLMT
2-STAGE FRONT OUTRIGGER ASSY
1/4-20NC X 2.25 GR8 ZP
SNAP RING - 2” INTERNAL
4
4
2
2
4
6
6
6
2
2
2
2
1
1
2
1
6
4
I-69
Section I - PARTS (cont'd)
2-STAGE FRONT OUTRIGGER HORIZONTAL ASSEMBLY
I-70
Section I - PARTS (cont'd)
2-STAGE FRONT OUTRIGGER HORIZONTAL ASSEMBLY
ITEM
PART NUMBER
535-0500001
0300110
0300113
0301522
0302776
0307639
0400122
0400126
0400392
0400416
0400480
0400482
0703137
0721781
0721987
0721989
0722124
0722174
0807354
0807357
0807358
0910190
9041403
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
DESCRIPTION
QTY
NYLATRON PAD
SNAP RING, 1”
GREASE FITTING, 1/4-28 STRAIGHT
CONNECTOR 6MJ-6MB
SNAP RING - EXTERNAL 2”
CYLINDER - MAIN BOOM EXTEND
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT GR.8, ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
SHAFT, EXT CYL
PLATE - PAD CAGE
PIN OUTRIGGER PIVOT
PLATE CAM MOUNTING
PLATE - RIGHT CAM MOUNTING
ANGLE CAM MOUNTING
FRONT OUTRIGGER BOX WELDMENT
FRONT OUTRIGGER 2ND STAGE WELDMENT
CYLINDER ADAPTER WELDMENT
LOCK PIN ASSEMBLY
1/2-13 X 1-1/2 HHCS GR 8 ZP
2
8
4
4
4
2
8
4
8
8
8
4
4
2
2
1
1
2
1
2
2
2
8
I-71
Section I - PARTS (cont'd)
3-STAGE FRONT OUTRIGGER HORIZONTAL ASSEMBLY
I-72
Section I - PARTS (cont'd)
3-STAGE FRONT OUTRIGGER HORIZONTAL ASSEMBLY
ITEM
PART NUMBER
535-0500001
0300113
0301522
0301642
0302509
0302776
0303490
0310396
0400017
0400066
0400122
0400126
0400239
0400343
0400351
0400367
0400392
0400416
0400426
0400451
0400480
0400482
0400491
0400503
0703277
0717869
0719462
0721781
0721987
0721989
0722124
0722174
0807354
0807355
0807356
0910190
9043950
896040002
897400002
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
DESCRIPTION
QTY
NYLATRON PAD
GREASE FITTING, 1/4-28 STRAIGHT
CONNECTOR 6MJ-6MB
SNAP RING, 1-1/4” ELBOW, 6MJ-6MB90
SNAP RING - EXTERNAL 2”
WEAR PAD (1/2 X 1 X 4)
HYDRAULIC CYLINDER
SCREW, #8-32 X 1” RD HD PHIL MACH ZP
1/4-20 X 3/4 HHCS GR.5,ZP
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
1/2-13 X 3/4 HHCS GR 5 ZP
1/2-13 X 2 HHCS GR.8,ZP
#8-32 HEX NUT W/ STAR WASHER, ZP
1/4-20 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT GR.8, ZP
5/8-11 NYLOCK NUT GR.8 ZP
1/4 FLAT WASHER ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
5/8 FLAT WASHER GR.8
SLIDER PAD
PLATE - SPACER (BOLT-ON)
PLATE - PAD CAGE
PLATE - PAD CAGE
PIN OUTRIGGER PIVOT
PLATE CAM MOUNTING
PLATE - RIGHT CAM MOUNTING
ANGLE CAM MOUNTING
FRONT OUTRIGGER BOX WELDMENT
FRONT OUTRIGGER MID STAGE WELDMENT
FRONT OUTRIGGER 3RD STAGE WELDMENT
LOCK PIN ASSEMBLY
5/8-11X1-1/2
NYLATRON PAD
PIN-FRONT-BOOM EXT.
2
4
2
4
2
4
2
2
8
2
12
4
16
8
8
2
8
8
2
2
12
8
16
2
4
4
2
2
2
1
1
2
1
2
2
2
2
4
2
I-73
Section I - PARTS (cont'd)
FRONT OUTRIGGER HYDRAULICS
I-74
Section I - PARTS (cont'd)
FRONT OUTRIGGER HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NUMBER
0301470
0301522
0301696
0301781
0303170
0303185
0303188
0307639
0310358
0310397
0310479
0310480
9012594
DESCRIPTION
ELBOW, 6MJ-8MB908
CONNECTOR 6MJ-6MB
ELBOW, 6MJ-6FJX90
TEE, SWIVEL NUT RUN
HOSE ASSY - 75” LG.
6G 6FJX 90S
16
6G 6FJX 90S
4
CYLINDER - MAIN BOOM EXTEND
VALVE - SOLENOID 12V OUTRIG CTRL
VALVE - DIVERTER WALVOIL
CYLINDER - OUTRIGGER
BULKHEAD 3NJ-BLKHD UNION W/ NUT
FITTING, HYD RUN TEE, 6MJ-6MB-6MJ
I-75
QTY
14
1
1
2
2
1
2
2
4
6
Section I - PARTS (cont'd)
3-STAGE REAR OUTRIGGER ASSEMBLY
I-76
Section I - PARTS (cont'd)
3-STAGE REAR OUTRIGGER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
PART NUMBER
0300110
0301522
0302509
0302546
0302550
0302551
0302552
0307001
0310395
0400044
0400066
0400118
0400126
0400139
0400392
0400452
0400482
0703457
0705499
0707117
0716141
0716644
0716645
0717855
0721901
0721902
0804419
0804420
0805892
0805893
0807389
0807390
0906963
HD1259
DESCRIPTION
SNAP RING, 1”
CONNECTOR 6MJ-6MB
ELBOW, 6MJ-6MB90
CLAMPING UNIT (SET) HC-10-2
SPLIT BUSH RUBBER C-SB10-12 3/4
SOCKET HEAD C-SN-10
WELD ADAPTER, C-WA-10
CYLINDER, TWIN
HYD CYLINDER, SPADE
DRIVE SCREW, #10-24 X 1/2” RD HD
1/4-20 X 3/4 HHCS GR.5,ZP
5/16-18 X 3/4 HHCS GR.5 ZP
3/8-16 X 1 HHCS GR.5,ZP
SCREW, 3/8”-16 X 1-1/2” HEX SKT SET
3/8-16 NYLOCK HEX NUT ZP
1/4 HELICAL LOCK WASHER ZP
3/8 HELICAL LOCK WASHER ZP
SHAFT, JACK CYLINDER UPPER
SHAFT, UPPER SPADE
SHAFT - UPPER SPADE
COVER - OUTER HORIZ OUTRIGGER
SPACER - TOP
SPACER - BOTTOM
SHIM BOTTOM
PIN OUTRIGGER TOP
PIN OUTRIGGER BOTTOM
2ND STAGE OUTRIGGER BOOM WLMT
3RD STAGE OUTRIGGER BOOM WLD
REAR OUTRIGGER PAD
PIN WLDT REAR OUTRIGGER PAD
LEFT REAR 3-STAGE O/R WELDMENT
RIGHT REAR 3-STAGE O/R WELDMENT
PIN REAR OUTRIGGER PAD ASSY
SAFETY SNAP PIN
I-77
QTY
8
4
4
4
4
2
2
2
2
2
8
2
8
6
6
8
8
2
2
2
2
2
2
4
2
2
2
2
2
2
1
1
2
2
Section I - PARTS (cont'd)
4-STAGE REAR OUTRIGGER ASSEMBLY
I-78
Section I - PARTS (cont'd)
4-STAGE REAR OUTRIGGER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
PART NUMBER
0300044
0300110
0301522
0302546
0302550
0302551
0302552
0310322
0310395
0400066
0400070
0400118
0400121
0400122
0400139
0400228
0400392
0400452
0400481
0703231
0707117
0721534
0721551
0721559
0721560
0721626
0721901
0721902
0722287
0722933
0722934
0722970
0805892
0807311
0807312
0807313
0807593
0807594
0906963
6G-6FJX
DESCRIPTION
CONNECTOR 6MJX8MB
SNAP RING, 1”
CONNECTOR 6MJ-6MB
CLAMPING UNIT (SET) HC-10-2
SPLIT BUSH RUBBER C-SB10-12 3/4
SOCKET HEAD C-SN-10
WELD ADAPTER, C-WA-10
CYLINDER - TELESCOPING PIGGYBACK
HYD CYLINDER, SPADE
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 1 HHCS GR5 ZP
5/16-18 X 3/4 HHCS GR.5 ZP
3/8-16NC X 3/4 HHCS GR. B
3/8-16 X 1 1/4 HHCS GR.5,ZP
SCREW, 3/8”-16 X 1-1/2” HEX SKT SET
SCREW, 3/8”-24 X 5/8” BUTTON HEAD SKT
3/8-16 NYLOCK HEX NUT ZP
1/4 HELICAL LOCK WASHER ZP
LOCKWASHER, 3/8” EXT TOOTH
STOP BLOCK
SHAFT - UPPER SPADE
TEL BLOCK, STAGE 3
STAGE 1 ENDCAP
SHAFT
SHAFT
SHIM
PIN OUTRIGGER TOP
PIN OUTRIGGER BOTTOM
PLATE, RETAINING
SHIM SIDE
SPACER - SIDE
PAD, SPACER
REAR OUTRIGGER PAD
STAGE 1 ASSY WLDMT
STAGE 3 ASSY WLDMT
STAGE 2 ASSY WLDMT
STAGE 1 ASSEMBLY WLMT (LH)
STAGE 1 ASSEMBLY WLMT (LT)
PIN REAR OUTRIGGER PAD ASSY
6G 6FJX 90S
I-79
QTY
4
8
4
4
4
2
2
2
2
16
8
2
8
4
6
16
6
24
28
4
2
8
2
2
2
2
2
2
2
4
4
4
2
2
2
2
1
1
2
8
Section I - PARTS (cont'd)
4-STAGE REAR OUTRIGGER ASSEMBLY (cont'd)
I-80
Section I - PARTS (cont'd)
4-STAGE REAR OUTRIGGER ASSEMBLY (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
PART NUMBER
0300044
0300110
0301522
0302546
0302550
0302551
0302552
0310322
0310395
0400066
0400070
0400118
0400121
0400122
0400139
0400228
0400392
0400452
0400481
0703231
0707117
0721534
0721551
0721559
0721560
0721626
0721901
0721902
0722287
0722933
0722934
0722970
0805892
0807311
0807312
0807313
0807593
0807594
0906963
6G-6FJX
DESCRIPTION
CONNECTOR 6MJX8MB
SNAP RING, 1”
CONNECTOR 6MJ-6MB
CLAMPING UNIT (SET) HC-10-2
SPLIT BUSH RUBBER C-SB10-12 3/4
SOCKET HEAD C-SN-10
WELD ADAPTER, C-WA-10
CYLINDER - TELESCOPING PIGGYBACK
HYD CYLINDER, SPADE
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 1 HHCS GR5 ZP
5/16-18 X 3/4 HHCS GR.5 ZP
3/8-16NC X 3/4 HHCS GR. B
3/8-16 X 1 1/4 HHCS GR.5,ZP
SCREW, 3/8”-16 X 1-1/2” HEX SKT SET
SCREW, 3/8”-24 X 5/8” BUTTON HEAD SKT
3/8-16 NYLOCK HEX NUT ZP
1/4 HELICAL LOCK WASHER ZP
LOCKWASHER, 3/8” EXT TOOTH
STOP BLOCK
SHAFT - UPPER SPADE
TEL BLOCK, STAGE 3
STAGE 1 ENDCAP
SHAFT
SHAFT
SHIM
PIN OUTRIGGER TOP
PIN OUTRIGGER BOTTOM
PLATE, RETAINING
SHIM SIDE
SPACER - SIDE
PAD, SPACER
REAR OUTRIGGER PAD
STAGE 1 ASSY WLDMT
STAGE 3 ASSY WLDMT
STAGE 2 ASSY WLDMT
STAGE 1 ASSEMBLY WLMT (LH)
STAGE 1 ASSEMBLY WLMT (LT)
PIN REAR OUTRIGGER PAD ASSY
6G 6FJX 90S
I-81
QTY
4
8
4
4
4
2
2
2
2
16
8
2
8
4
6
16
6
24
28
4
2
8
2
2
2
2
2
2
2
4
4
4
2
2
2
2
1
1
2
8
Section I - PARTS (cont'd)
REAR OUTRIGGER HYDRAULICS
I-82
Section I - PARTS (cont'd)
REAR OUTRIGGER HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
0301522
0302056
0302085
0302372
0302509
0910571
0910572
9012594
DESCRIPTION
CONNECTOR 6MJ-6MB
HOSE ASSY - 183” LG.
FITTING 12MJ-10MB90
HOSE ASSY - 240” LG.
ELBOW, 6MJ-6MB90
LH 3 STAGE REAR OUTRIGGER
RH 3 STAGE REAR OUTRIGGER
FITTING, HYD RUN TEE, 6MJ-6MB-6MJ
I-83
QTY
14
4
1
4
4
1
1
6
Section I - PARTS (cont'd)
PROPORTIONAL CONTROL KIT W/ SINGLE DRAG WINCH
ITEM
--
PART NUMBER
DESCRIPTION
QTY
124004178
1140 SNGL DRG LUM PROP CTL KIT
--
--
1
2
3
4
5
6
7
8
9
10
11
0910402
0400056
0400367
0400451
0723378
0908138
0910401
0910426
0910614
0910615
0910624
0910635
BASIC PROP CONT W/ 1DW 1140/25
1/4-20X3 HHCS GR5 ZP
1/4-20 NYLOK HEX NUT ZP
1/4 FLATWASHER ZP
PLATE-PIN SUPPORT
LEFT CONTROL ASSY (10 HANDLE)
KIT, PROP CTL VLV 1125/40 1DW
HOSE KIT, 1130/40 VALVE
VALVE - U/L CONTROL
OUTRIGGER CONT VALVE KIT
CONTROL LINK KIT L/R
OUTRIGGER BLEED VALVE ASSY
1
2
2
2
2
1
1
1
1
1
1
1
0910434
0301451
0302750
0307119
0310020
0908675
0908847
0910477
0910527
0910712
9024041
9032006
SHIP KIT,1140 PROP CTL NON-HSC
GROUND CABLE
HARNESS, GROUND CABLE
PUMP - HYDRAULIC
WIRING HARNESS,OUTRIG FUNCTION
KIT, REMOTE NOT THERE LAMP
KNOB DECAL PANEL(10 HNDL) KIT
1125/40 AIR CNTL ASSY-SGL DRAG
KIT - PUMP 1140 1
PARTS-PROPORTIONAL WIRING
SWITCH-McGILL 0852-0110
WEATHER STRIP 3/16 X 1/2
-4
4
1
1
1
1
1
--
12
13
14
15
16
17
18
19
20
21
22
I-84
1
1
20
Section I - PARTS (cont'd)
PROPORTIONAL CONTROL KIT W/ DUAL DRAG WINCH
ITEM
--
PART NUMBER
--
DESCRIPTION
QTY
124004207KIT,DUAL DRG LUM PROP CTL 1140 --
--
1
2
3
4
5
6
7
8
9
10
--
0400056
0400367
0400451
0723378
0908149
0910403
0910580
0910614
0910615
0910635
0910404BASIC PROP CONT W/ 2DW 1140/25
1/4-20X3 HHCS GR5 ZP
1/4-20 NYLOK HEX NUT ZP
1/4 FLATWASHER ZP
PLATE-PIN SUPPORT
CONTROL ASSY, MANUAL-11 HANDLE
KIT, PROP CTL VALVE 1130/40 2D
HOSE KIT, 1140 VALVE 2DW
VALVE - U/L CONTROL
OUTRIGGER CONT VALVE KIT
OUTRIGGER BLEED VALVE ASSY
-2
2
2
2
1
1
1
1
1
1
--
0301451
0302750
0307119
0310020
0908675
0908847
0910527
0910625
9024041
9032006
0910626SHIP KIT,1140 PROP2CTL NON-HSC
GROUND CABLE
HARNESS, GROUND CABLE
PUMP - HYDRAULIC
WIRING HARNESS,OUTRIG FUNCTION
KIT, REMOTE NOT THERE LAMP
KNOB DECAL PANEL(10 HNDL) KIT
KIT - PUMP 1140
1125/40 AIR CNTL ASY-DUAL DRAG
SWITCH-McGILL 0852-0110
WEATHER STRIP 3/16 X 1/2
-4
4
1
1
1
1
1
1
1
20
--
11
12
13
14
15
16
17
18
19
20
I-85
Section I - PARTS (cont'd)
HYDRAULIC CYLINDERS
ITEM
PART NUMBER
DESCRIPTION
QTY
1
--
0302792
0304528
CYLINDER, 1140 BOOM LIFT
SEAL KIT, 1140 BOOM LIFT CYLINDER
2
--
2
--
0303501
0304590
CYLINDER, SDU4 EXTEND
SEAL KIT, SDU4 EXTEND CYLINDER
1
--
3
--
0306743
0304625
CYLINDER, 1130 BOOM EXTEND
SEAL KIT, 1130 BOOM EXTEND CYLINDER
1
--
4
--
0306744
0304670
CYLINDER, LDU EXTEND
SEAL KIT, LDU EXTEND CYLINDER
1
--
5
--
0306746
0304609
CYLINDER, UNDERLIFT FOLD
SEAL KIT, UNDERLIFT FOLD CYLINDER
1
--
6
--
0306747
0304601
CYLINDER, 1130 BOOM LIFT
SEAL KIT, 1130 BOOM LIFT CYLINDER
2
--
7
--
0307001
0304674
CYLINDER, 3-STAGE REAR O/R EXTEND
SEAL KIT, 3-STAGE REAR O/R EXTEND CYL.
2
--
8
--
0307378
0304618
CYLINDER, SDU4 TILT
SEAL KIT, SDU4 TILT CYLINDER
2
--
9
--
0307402
0310899
CYLINDER, 1140 BOOM EXTEND
SEAL KIT, 1140 BOOM EXTEND CYLINDER
1
--
10
--
0307425
--
CYLINDER, SDU4 LOWRIDER EXTEND
SEAL KIT, LDU LOWRIDER CYLINDER
2
--
11
--
0307639
0310900
CYLINDER, 2-STAGE FRONT O/R EXTEND
SEAL KIT, 2-STAGE FRONT O/R EXTEND CYL.
2
--
12
--
0310322
0310901
CYLINDER, 4-STAGE REAR O/R EXTEND
SEAL KIT, 4-STAGE REAR O/R EXTEND CYL.
2
--
13
--
0310395
0310275
CYLINDER, REAR O/R LIFT
SEAL KIT, REAR O/R LIFT CYLINDER
2
--
14
--
0310396
0310902
CYLINDER, 3-STAGE FRONT O/R EXTEND
SEAL KIT, 3-STAGE FRONT O/R EXTEND CYL.
2
--
15
--
0310477
0310903
CYLINDER, LDU LIFT
SEAL KIT, LDU LIFT CYLINDER
1
--
16
--
0310478
0310904
CYLINDER, LDU TILT
SEAL KIT, LDU TILT CYLINDER
1
--
17
--
0310479
0310905
CYLINDER, FRONT OUTRIGGER LIFT
SEAL KIT, FRONT OUTRIGGER LIFT CYL.
2
--
I-86
Section I - PARTS (cont'd)
HYDRAULIC CYLINDERS (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
18
--
0310629
0310906
CYLINDER, LDU LOWRIDER EXTEND
SEAL KIT, LDU LOWRIDER CYLINDER
2
--
19
--
HC0159
0304522
CYLINDER, SDU4 LIFT
SEAL KIT, SDU4 LIFT CYLINDER
1
--
I-87
NOTES
NOTES
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement