Refrigeration modules Advance planning for fresh

Refrigeration modules
Fresh-food refrigerator
general features
Temperature control. Digital touch controls offer a range of
temperatures for precise chilling of a variety of fresh foods and
beverages, and an LED display allows easy viewing of
temperatures.
Storage convenience. Removable, spillproof glass shelves,
along with a QuickSpace™ shelf and a clear Lexan® crisper
on full-extension slides, provide easy access to contents.
Flexible installation. Both the right-hand and left-hand door
swing models stand beautifully on their own, or may be
built into cabinetry. Models ZIFI240PII and ZIFI240PLII accept
a custom 3/4" panel and handle for a personalized look.
Fresh-food
ZIBS240PSS Head On
refrigerator
Bar refrigerator
ZIBS240PSS
Head On
with
icemaker
Bar refrigerator with icemaker
general features
Right-hand door swing
ZIFS240PSS—Stainless steel
ZIFI240PII—Custom panel
ZIBS240PSS—Stainless steel
ZIBI240PII— Custom panel
Automatic icemaker. Self-contained icemaker features a
removable ice bin on full-extension slides and a heavy-duty
ice scoop for serving convenience.
Left-hand door swing
ZIFS240PLSS—Stainless steel
ZIFI240PLII—Custom panel
Temperature control. Digital touch controls allow a range of
temperature settings for different cooling needs, and an LED
display makes settings clearly visible.
Storage convenience. Beverage shelf on full-extension slides
holds up to five wine bottles or ten 12-oz. cans, while spillproof
glass shelves provide ample space for fresh foods and beverages.
Flexible installation. The free-standing bar refrigerator stands
beautifully on its own, or may be built into cabinetry. Model
ZIBI240PII accepts custom 3/4" panel and handle for a
personalized look.
For additional details on product installation, warranty
coverage, care and maintenance, visit monogram.com.
Advance planning for fresh-food
refrigerator and bar refrigerator
with icemaker
ZIFS240PSS
Overall dimensions*
(WxHxD in inches):
23-3/4 x 34-1/4 - 34-3/4" x 23-7/8
Amps @120 Volts
15
Approx. shipping wt. (lbs.)
126
• Built-in or free-standing
installation
• Factory-installed black
toekick; stainless toekick
included
• Trimmed model designed
to be customized with custom
panel and handle
• Right-hand or left-hand door
swing models for installation
flexibility
ZIFS240PSS
Overall dimensions*
(WxHxD in inches):
23-3/4 x 34-1/4 - 34-3/4" x 23-7/8
Amps @120 Volts
15
Approx. shipping wt. (lbs.)
126
• Built-in or free-standing
installation
• Factory-installed black
toekick; stainless toekick
included
• Trimmed model designed
to be customized with custom
panel and handle
• Right-hand door swing only
*Height excluding legs, including
hinge; depth excluding handle
The installation space
The Monogram® fresh-food refrigerator and bar refrigerator
with icemaker may be installed beneath a countertop or can
be used free-standing.
• If installing between frameless cabinets, a 1/2"-wide filler
strip or side panel may be required. The filler strip will act as
a spacer between the door case and adjacent cabinet and
will prevent interference with cabinet door swing. The width
of the opening must include filler panels.
112
Note: When installed, the stainless steel models ZIFS240PSS
and ZIBS240PSS will be flush with adjacent cabinetry. If installing
between frameless cabinets, a 1/2"-wide filler strip or side panel
may be required to prevent interference with cabinet door swing.
Models ZIFI240PII and ZIBI240PII will project forward 1-3/4" of
adjacent 24"-deep cabinets.
34-1/2"
to
35"
Locate Outlet
10-1/2"
Water and
24" Min.
Electrical 9"
Locations Max.
23-3/4" Stainless Steel
Models
1/2"
24-7/8" Framed Models
1-1/2"
23-3/4" Min.
Depth Including
Handle:
26" Stainless Steel
Models Only
34-1/4" - 34-3/4"
23-3/4"
monogram.com
Advance planning for fresh-food refrigerator
and bar refrigerator with icemaker
• Do not install where they will be subject to direct
sunlight, heat or moisture.
• These products are not designed to be stacked one over
the other.
Electrical
A 120V, 60HZ., 15- or 20-amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall of the installation
location. See cutout illustration.
Note: GFCI (ground fault circuit interrupter) is not recommended.
Water line
Bar refrigerators are equipped with an automatic icemaker.
The water line can enter an opening in the back wall or floor
as shown in the cutout illustration. Route GE SmartConnect™
kit or 1/4" O.D. copper tubing between the cold water line and
the water connection location. The installation of an easily
accessible shut-off valve in the water line is required.
A field-installed overlay door panel is required for model
3/4"
custom
panels
for
ZIFI240
and ZIBI240
refrigerators.
fresh
food
and
bar
refrigerator
• 3/4"
The overlay
panel
must be
custom
panels
forsecured to a 1/4"-thick backer
panel that slides into the door trim. A 0.10"-thick spacer panel
fresh food and bar refrigerator
must be placed between the overlay and backer panel.
Double-drawer
refrigerator
• Do not install these products where the temperatures will
go below 55°F (13°C) or above 90°F (32°C).
3/4" custom panels for fresh-food refrigerator
and bar refrigerator with icemaker
3/4" custom
double draw
3/4" cust
double d
•C
ustom handles of your choice must be installed onto the
assembled overlay panel. Overlay Panel
Overlay
Panel
Door
Door
Spacer Panel
Backer Panel
.10 Inch
Spacer
Backer Panel
.10 Inch
Spacer
B
A (width)
23-3/16"
22-1/2"
23-5/8"
Maximum
assembled
panel weight
is 25 pounds.
1/4"
.10 I
Backer
Spa
Panel
1/4"
.
Backer
Panel
A
B (height)
29-9/16"
29-1/16"
30"
12-1/2 lbs. max
A
12-1/2 lbs.
B
12-1/2 lbs. max
A
Side -by-side installation
Assemble overlay panels with glue and screws.
Make the most of your kitchen space with two Monogram
refrigeration modules installed together.
•C
enter spacer panel on the backer panel, left to right, and top
to bottom. Secure the panels with glue.
• Products must operate from separate properly
grounded receptacles.
•C
enter the spacer/backer panel on the overlay panel. Secure
Route
with glue and screws.
for hinge Countersink all screws.
1/4" G
12-1/2 lbs.
A
clearance
Custom 3/4
panel hinge
routing
Route
All Monogram refrigeration modules are factory set for a 110°
door swing.
When installed in a corner:
• Allow the minimum door swing clearances shown. The use of
a custom panel and custom handle influences the minimum
clearances required.
• The minimum clearance shown at 90° will allow full extension
of drawers and shelves.
Right-hand door
swing shown.
Allow the same
clearances
for left-hand
fresh-food
models on the
opposite side.
A
Minimum to Wall
110° Door
Swing
90° Door
Swing
21-5/8"
23-5/8"
110°
90°
B
Minimum to Wall
Models
ZIFS240 / ZIBS240
ZIFI240 / ZIBI240
Top
view
for hinge
Use a 3/4" router bitclearance
to cut a notch into
the back side of the
of
Top the notch 3/4" deep,
assembled3/4
panel3/8for hinge clearance.
Cut
overlay
view
custom
Right3/8" forward of the back
7/8" wide and
side.
Front
Front
panelof
side
3/8
overlay
view
custom
3/8
ofRight
Front
Front
panel
side
overlay
view
custom
Route
7/8
3/8
panelof
for hinge
overlay
clearance
Note: Right-hand
custom
Route
7/8
models
panel
forillustrated.
hinge
Cut notches
on the
clearance
opposite side for
left-hand door swing.
W ine re ser ve, wine chiller
b everage center
Door swing clearances
AB
14"
4"
16"
4-1/2"
O
Door
3/4" overlay panel dimensions (in inches)
1/4" backer
0.10" spacer
3/4" overlay
Over
Pan
Door
Overlay Panel
Spacer Panel
Overlay
Panel
1/4"
Backer
Panel
1/4"
Backer
Panel
Fr e s h - f o o d r e f r i g e r a t o r
bar refrigerator
All Monogram refrigeration modules may be closed in on
the top and sides as long as the front is unobstructed for air
circulation and door swing.
O u t d o o r/ i n d o o r
refrigerator
Location requirements
The serial plate is located on the inside ceiling of the fresh-food
refrigerator, and on the left wall below the ice compartment of
the bar refrigerator.
113
1/