ROUSH Mustang Strut Tower Brace Installation Instructions Part #R06020056

ROUSH Mustang Strut Tower Brace Installation Instructions Part #R06020056
ROUSH Mustang Strut Tower Brace
Part #R06020056
Application: 2005 - 2009 ROUSH Stage 3 Mustang
Installation Instructions
Before installing your ROUSH Performance Product(s), read through the entire installation
procedure and check to make sure all items are present. Contact ROUSH Customer Service at 1800-59-ROUSH, 9:00 AM to 5:00 PM weekdays, for any questions regarding fit or instructions that
are unclear to you.
Packaging List for Strut Tower Brace Kit
Description
RPP Roush Part Number
Qty
R06020056
R06020081
1
1
Strut Tower Brace
Installation Instructions
Equipment and Supplies Required
•
•
•
13mm Wrench or socket
Torque Wrench with 15 to 75 Nm (10 to 60 lb-ft) capacity
Medium Strength (Blue) threadlocker
1305-R06020081-AA
Page 1 of 4
1-800-59-ROUSH
Air Induction
LIMIT OF LIABILITY STATEMENT
The information contained in this publication was accurate and in effect at the time the publication
was approved for printing and is subject to change without notice or liability. ROUSH Performance
Products (RPP) reserves the right to revise the information presented herein or to discontinue the
production of parts described at any time.
SAFETY REQUIREMENTS
STOP! READ IMPORTANT SAFETY CAUTIONS AND WARNINGS BEFORE PROCEEDING.
IMPORTANT SAFETY NOTICE
Appropriate disassembly, assembly methods and procedures are essential to ensure the personal
safety of the individual performing the kit installation. Improper installation due to the failure to
correctly follow these instructions could cause personal injury or death. Read each step of the
installation manual carefully before starting the actual installation.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Always wear safety glasses for eye protection.
Place ignition switch in the OFF position.
Always apply the parking brake when working on a vehicle.
Block the front and rear tire surface to prevent unexpected vehicle movement.
If working without a lift, always consult vehicle manual for correct lifting specifications.
Operate the engine only in well-ventilated areas to avoid exposure to carbon monoxide.
Do not smoke or use flammable items near or around the fuel system.
Use chemicals and cleaners in well-ventilated areas.
Batteries produce explosive gases, which can cause personal injury. Therefore, do not
allow flames, sparks or flammable substances to come near the battery.
10. Keeps hands and any other objects away from the radiator fan blades.
11. Keep yourself and your clothing away from moving parts when the engine is running.
12. Do not wear loose clothing or jewelry that can get caught in rotating parts or scratch
surface finishes.
13. Allow the engine, cooling system, brakes and exhaust to cool before working on a
vehicle.
WORK SAFELY!
Perform this installation on a good clean level surface for maximum safety and with the engine
turned off.
1305-R06020081-AA
Page 2 of 4
1-800-59-ROUSH
1. Remove the four (4) inboard upper strut mounting nuts. (Refer to Figure 1)
Figure 1
2. Place the Strut Tower brace over the upper strut mounting studs with the larger curved bar
toward the rear of the vehicle. (Refer to Figure 2)
Figure 2
1305-R06020081-AA
Page 3 of 4
1-800-59-ROUSH
3. Apply threadlocker to the threads of the upper strut mounting and install upper strut nuts.
Torque to 35 Nm (26 lb-ft). (Refer to Figure 3)
Figure 3
Congratulations!!! You have completed the installation of the ROUSH Performance Products,
ROUSH Mustang Strut Tower Brace. It is recommended that you save all parts removed from
your vehicle during the installation of this kit.
WARRANTY
All retail parts carry a 90-day warranty from the date of purchase. This warranty covers defects in materials
or workmanship, and does not include (i) normal wear and tear, environmental conditions, improper
installation; (ii) road hazards, misuse, abuse, neglect, accidents, collision, fire, theft, freezing, vandalism,
riot, explosion, or objects striking the vehicle; (iii) misusing the vehicle, such as driving over curbs,
overloading, racing, or using the vehicle as a stationary power source; (iv) altering, disassembling or
modifying the parts; (v) defects caused or induced by failures, breakdowns, or damage by other parts,
components or the vehicle; (vi) subjecting the parts to excessive moisture or water or any motor vehicle
fluids (e.g.: oil, anti-freeze, battery acid, brake fluid, etc.); (vii) acts of God, natural disasters and other
similar causes beyond the reasonable control of Roush; or (viii) application of chemicals that affect the
parts. This Limited Warranty does not cover surface deterioration of paint, trim, and appearance items that
result from use and/or exposure to the elements, such as stone chips, scratches, bird droppings, lightning,
hail, windstorm, dings, dents, earthquake, road salt, tree sap, water or flood.
ROUSH SHALL NOT BE LIABLE TO REIMBURSE CUSTOMER/DEALER FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE INSTALLATION OR USE OF ANY PRODUCT SOLD
THROUGH THIS CATALOG OR ARISING OUT OF ANY BREACH OF WARRANTY, EXCEPT AS MAY BE STATED
IN THIS CATALOG, ROUSH DISCLAIMS ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
ROUSH’S LIABILITY EXCEED THE PRICE PAID BY CUSTOMER/DEALER FOR PRODUCTS SOLD REGARDLESS
IF ROUSH HAS BEEN ADVISED IN ADVANCE OF ANY POTENTIAL PROBLEM OR IF A CLAIM IS BASED ON
CONTRACT, TORT, STRICT LIABILITY, PRODUCT LIABILITY OR OTHERWISE. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES OR THEIR DURATION, OR LIABILITY
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY
NOT APPLY.
1305-R06020081-AA
Page 4 of 4
1-800-59-ROUSH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement