Section L - Floor Boxes

Section L - Floor Boxes
Section O
Floor Boxes
Index
Product
Page
Hubbell Floor Box Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-2
Hubbell SystemOne
Floor Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-3
Covers and Sub-Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-4
Configuration Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-5
Metal and Non-Metallic Concrete Floor Boxes . . . . . . . . . . . . . . . . . . . . . O-6
Sub-Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-7
Flush Concrete Floor Boxes and Covers
Round Non-Metallic, Single or Multi-Service . . . . . . . . . . . . . . . . . . . . . . . O-8
Round Metal, Single Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-9
Rectangular Non-Metallic, 1-, 2-, and 3-Gang . . . . . . . . . . . . . . . . . . . . . O-10
Rectangular Cast Iron, 1-, 2-, and 3-Gang . . . . . . . . . . . . . . . . . . . . . . . . O-12
Rectangular Stamped Steel, 1-, 2-, and 3-Gang . . . . . . . . . . . . . . . . . . . O-13
Recessed Concrete Floor Boxes and Covers
2-Gang Stamped Steel and Cast Iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . O-14
4- and 8-Gang Stamped Steel and Cast Iron . . . . . . . . . . . . . . . . . . . . . . O-15
6-Gang Stamped Steel and Cast Iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . O-16
Large Capacity Concrete Floor Boxes with Round Cover . . . . . . . . . . . . O-17
7- and 11-Gang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-18
Ballroom Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-19
Flush Floor Boxes for Wooden Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-20
Above-Floor Service Fittings (Single Service) . . . . . . . . . . . . . . . . . . . . . . . O-21
Residential Delivery Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-22
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-24
Hubbell Floor Box Cover to Receptacle Compatibility Chart . . . . . . . . . . . . O-26
CONNEXION Modular Wiring Zone System
System Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-29
Unloaded Raised Access Floor Boxes and Face Plates . . . . . . . . . . . . . O-30
Custom Pre-Wired Access Floor Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . O-31
Convention Center Utility Box
Metallic Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-32
Dimensional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-33
Furniture and Work Surface Connectivity Boxes and Table Top Boxes
Furniture and Work Surface Connectivity Boxes . . . . . . . . . . . . . . . . . . . O-35
Pre-Wired Work Surface Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-36
Pre-Wired Work Surface Elite Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-37
Recessed Wall Boxes
AV In-Wall and Ceiling Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-38
Large Capacity Wall Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-39
Multi-Connect – Dimensional Information and Face Plates . . . . . . . . . . . O-40
www.hubbell-wiring.com
Hubbell SystemOne
Floor Boxes
Recessed Multi-Service
Concrete Floor Boxes
CONNEXION Zone
Distribution System
Furniture and Work
Surface Boxes
O-1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Hubbell Floor Boxes
Applications
Featuring the unique capabilities of Hubbell’s SystemOne universal cover and sub-plate design, Hubbell has expanded
its floor box offering to provide industry leading flexibility while accommodating an extensive range of applications.
Hubbell SystemOne is constructed to give customers the ability to create personal solutions for their most demanding,
power, data and audio/video requirements.
Hubbell SystemOne Floor Box Applications…
Multi-Service Applications
This Hubbell SystemOne sub-plate
incorporates a standard Style Line®
decorator opening, which can be used
for an active multimedia device. In
addition, a 20A outlet is supplied for
power and two keystone openings
for voice/data services.
Multimedia Applications
Other Hubbell SystemOne sub-plates are
designed to meet the growing needs of
the audio/video market. Some sub-plates
provide power outlets with Hubbell’s AV
products including 15-pin SVGA, RCA,
S-Video, 3.5mm stereo, HDMI and XLR
microphone jacks. Other sub-plates can
accommodate Extron® Electronics MAAP
and AAP series AV modules, as well as
FSR IPS plates.
4X4 Applications
Provides maximum power capacity
for flush, multi-service applications.
This sub-plate features a pre-wired
four outlet 20A, 125V receptacle and
four openings for flush mount Hubbell
modular jacks and audio/video Snap
Fit connectors. Receptacle wiring
permits dual- circuit, as well as
isolated ground applications.
Flush Applications
Hubbell offers a wide variety of traditional
solutions including single and multi-gang
cast iron, stamped steel and non-metallic
floor boxes in both round and rectangular
designs. These boxes can be finished
with either brass or aluminum covers
and flanges to match any office décor.
All Hubbell floor box assemblies exceed
UL scrub water exclusion requirements.
Wooden Floor Applications
Hubbell offers round, single service and
rectangular, multi-service floor boxes
for wooden floor applications. The
rectangular boxes are available in one,
two and three-gang options and feature
removable barriers for maximum
capacity while maintaining separation
of power and low voltage. A variety
of covers and flanges are available in
brushed aluminum or brass to meet
aesthetic requirements.
Traditional Floor Boxes…
Recessed Applications
For applications where recessed
connections are desired, Hubbell has
a complete line of recessed stamped
steel and cast iron floor boxes, from
two to eleven gangs. A variety of
modular face plates are available to
meet a wide array of power, data,
voice and audio/video requirements.
Carpet and tile cover assemblies
are offered in a variety of finishes
and styles.
Extron® is a registered trademark of Extron Electronics.
O-2
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
The Hubbell SystemOne Floor Box Family
Cast Iron
Features
• Corrosion resistant for on-grade
applications
• Oversized 1½" NPT threaded conduit
access holes for low voltage
S1CFB
Complies with UL514A & C
• 1" NPT threaded conduit access
holes for power
• Easily installed, aesthetic and configurable floor box
solution, for open floor plans that require both power
and data services
• The Hubbell SystemOne Universal Cover mounts
directly to the floor box riser, eliminating the need
for an additional adapter collar
• The Hubbell SystemOne Universal Cover features
ScrubShield® technology that exceeds UL514 scrub
water exclusion requirements
• Convenient cubic inch capacity (cm3) markings on
interior of box
Steel
• Stamped steel construction
S1SFB
• Leveling feet provide before pour adjustability
• Economical and light weight for
above-grade applications
• Non-metallic riser allows a simple saw cut for
adjustment after pour
• Concentric knockouts permit
various conduit sizes for both
power and data services
• Supplied with concrete cover and closure plugs
(where applicable)
• Designed to accommodate multi-service
applications with the wide offering of Hubbell
SystemOne sub-plates
• Hubbell SystemOne Metal Floor Boxes are
approved for use in the City of Chicago
Steel AV
• Accommodates high-capacity
multimedia applications in a 3½"
minimum depth of pour
• Oversized 1½" NPT threaded
data hub
S1SFBAV
• ¾", 1" concentric knockouts for
power services
Non-Metallic
Features
• Non-corrosive plastic construction
• Oversized 1½" data conduit hub
for increased cable capacity and
bend radius
S1PFB
• Parallel conduit hubs reduce labor
and material cost, facilitating easier
wire pull
www.hubbell-wiring.com
• Economical, easy to install, in-floor delivery system
for open plan spaces
• The Hubbell SystemOne Universal Cover mounts
directly to the floor box riser, eliminating the need for
an additional adapter collar
• Concrete cover, conduit reducers and conduit hub
plugs included
O-3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Hubbell SystemOne Universal Covers
Complies with UL514A & C
Universal Flange and Cover Assembly
Carpet
• Hinged doors open 180 degrees
flush to the carpet flange or tile
Tile
• Locking studs allow each door to
be secured independently
• The universal carpet or tile flange
can be used for Hubbell SystemOne
Floor Boxes and Fire-Rated
Poke-Throughs
• Finishes and colors available:
Aluminum
Finish
Brass
Finish
Black
Gray
Ivory
Hubbell SystemOne Sub-Plates
Hubbell’s modular sub-plate design allows users to economically
upgrade Hubbell SystemOne FRPT and Floor Boxes to
accommodate future moves, adds and changes.
See page O-7 for additional Information.
4x4 Sub-Plate
Dual Style Line®
Decorator Sub-Plate
Datacom and Power
Sub-Plate
Twist-Lock®
Sub-Plate
Extron® AAP/MAAP
and Power Sub-Plate
Furniture Feed
Cover, Carpet
Power Devices and Connectivity
Hubbell-PRO
Receptacles
Hubbell
iSTATION
Hubbell
X-END
Features
• Durable cast aluminum construction available in
black, gray, brass, aluminum and ivory powder
coat finishes
• Features ScrubShield® technology that exceeds
UL514 scrub water exclusion requirements
• Provides consistent look and maximum functionality
throughout the installed life
• Meets ADA standards for accessible design,
section 4.3.8
Features
• Durable cast aluminum construction, powder
coat finish
• Hubbell 4X4: four 20A, 125V receptacles, four
keystone openings for voice/data jacks and flush
multimedia connectors
• Hubbell X-END and Hubbell iSTATION modular
connectivity
• Accommodates Extron® Electronics Architectural
Series audio/video system integration products
• Accommodates GFCI, surge and standard Style
Line® Decorator receptacles
• Twist-Lock® receptacle with two flush keystone
openings
• Large capacity and multi-service furniture feed
applications
• Open system sub-plates permit maximum
data flexibility
Features
• Choose from Hubbell’s industry leading selection
of wiring devices for power services
• Hubbell iSTATION connectivity modules integrate
with SystemOne to provide comprehensive multimedia solutions
• Hubbell X-END application cables and tails allow
for more connectivity in a smaller footprint
Extron® is a registered trademark of Extron Electronics.
O-4
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Hubbell SystemOne Configuration Chart
NonMetallic
Sub-Plates
S1SP
Style Line® Decorator/GFCI
S1SPDU
Duplex/Duplex
Line®
Complies with UL514A & C
Floor Boxes*
4" Core Hole
Fire-Rated Poke-Throughs
Metal
S1PFB
S1CFB
S1SFB
S1SFBAV
S1PTFIT
S1PT4X4FIT S1PTAVFIT
3
3.5
3.5
3.5



3
3.5
3.5
3.5



3
3.5
3.5
3.5



4
4
4
4



4
4
4
4



5
5
5
5



3.5
3.5
3.5
3.5



S1SPDUSL
Duplex/Style
Decorator
S1SP4X4
S1SP4X4PA
S1SP4X4SYS
S1SPTL
Hubbell 4 X 4
Panduit Mini-Com® 4 X 4
SYSTIMAX® 4 X 4
Twist-Lock® Receptacle
+ Data
S1SP3IM
Hubbell DataCom
+ Power
S1SP4IM
Hubbell DataCom
S1SPDU2IM
Hubbell DataCom
+ Duplex
5
5
5
5



S1SPSL2IM
Hubbell DataCom
+ Style Line® Decorator
5
5
5
5



S1SPFFxx
(Carpet)
S1SPFFTxx
(Tile)
S1SPEXT1
Furniture Feed Cover/Flange
(Replace “x” with BRS (brass
finish), AL (aluminum finish),
BL (black) or GY (gray).
3
3.5
3.5
3.5



Extron® or FSR
+ Power
4
4
4
4



S1SPEXT2
Extron® or FSR
+ Power
4
4
4
4



S1SPEXT3
Extron®
4.5
4.5
4.5
4.5



S1SPEXT4
Extron®
+ Power
4
4
4
4



S1SPORT
Ortronics Series II®
+ Power
5
5
5
5



S1SPTRAC
Ortronics TracJack®
+ Power
5
5
5
5



S1SPMAX
Siemon MAX® + Power
5
5
5
5



S1SPAMM20
Active Multimedia + Flush
Keystone + Power
5
5
5
5



S1CFCxx
SystemOne
Carpet Cover
S1TFCxx
SystemOne
Tile Cover
SystemOne Floor Boxes
and FRPTs use SystemOne
Universal Covers (Replace
“x” with BRS (brass finish),
AL (aluminum finish),
BL (black), GY (gray) or
I (ivory).
or FSR
Single-Service
or FSR
www.hubbell-wiring.com
Signifies minimum depth of concrete pour
in inches for Hubbell SystemOne Floor
Boxes.

Recommended
Floor Fitting

Alternative Floor
Fitting

Not Compatible
Note: *Fire-Rated Poke-Throughs available with integral power junction box. Add “J” suffix to catalog
numbers listed above (Example: S1PTFITJ). See section P for additional Information.
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon
Company. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. SYSTIMAX® is a registered
trademark of CommScope, Inc. TracJack ®, Series II® & Ortronics® are registered trademarks of
Ortronics/Legrand.
O-5
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Hubbell SystemOne Metal and Non-Metallic
Concrete Floor Boxes
Complies with UL514A & C
Dimensions Inches (mm)
Style
D
D
Cast Iron
Steel
Steel AV
Non-Metallic
S1CFB*
S1SFB*
S1SFBAV*
S1PFB
A
A
B
C
B
Metal
C
Non-Metallic
Min. Depth of Pour
3.50" (88.9)
3.50" (88.9)
3.50" (88.9)
3.00" (76.2)
Adjustability
Fully
Fully
Fully
Fully
Cubic Inch (cm3) Capacity
156.0 cu. in.
(2556.4 cm3)
175.7 cu. in.
(2879.2 cm3)
177.5 cu. in.
(2909.7 cm3)
100 cu. in.
(1638.7 cm3)
Dimensions – A
3.00" (76.2)
3.00" (76.2)
3.00" (76.2)
6.00" (152.4)
Dimensions – B
7.26" (184.4)
7.50" (190.5)
7.50" (190.5)
5.58" (141.7)
Dimensions – C
7.45" (189.2)
7.38" (187.4)
7.38" (187.4)
7.08" (179.8)
Dimensions – D (Inside Diameter)
5.00" (127.0)
5.00" (127.0)
5.00" (127.0)
5.00" (127.0)
Power Entries
1" NPT
Access Holes
¾", 1"
Concentric KO
¾", 1"
Concentric KO
1" Conduit Hub
Data Entries
1½" NPT
Access Holes
¾", 1", 1¼"
Concentric KO
1½" Threaded Hub
(included)
1½" Conduit Hub
Concrete Cover Included



Closure Plugs Included
–




Reducers
–
–
–
(see below)
Accepts Hubbell SystemOne
Universal Cover




Cover Mounting Clips Included




Non-Metallic Low Voltage Divider Included (S1DIV1)




Note: UL File Number E92074.
CSA File Number LR18416.
*S1CFB, S1SFB, S1SFBAV are approved for use in the City of Chicago.
S1PFB reducers included: Qty (2) combo plug/reducers 1" to ¾"
Qty (2) reducers 1½" to 1"
Qty (2) reducers 1½" to ¾"
Qty (2) plugs 1½"
Hubbell SystemOne Universal Covers
Floor Box Accessories
• Cast aluminum construction
Description
• Durable powder coat finish
Color
Carpet
Tile
Aluminum Finish
Brass Finish
Black
Gray
Ivory
S1CFCAL
S1CFCBRS
S1CFCBL
S1CFCGY
S1CFCI
S1TFCAL
S1TFCBRS
S1TFCBL
S1TFCGY
S1TFCI
Aluminum
Finish
Brass
Finish
Black
Catalog Number
Abandonment Plates
Used to cover abandoned SystemOne Fire-Rated
Poke-Throughs or Floor Boxes.
Gray
Ivory
S1AP4BL
S1AP4GY
Black
Gray
Replacement Side by Side Divider
Used to isolate compartments in S1SP, S1SPFFx,
S1SPFFTx, S1SPDU, S1SPDUSL, S1SPDU2IM
and S1SPSL2IM sub-plates. Included with all
SystemOne Floor Boxes.
S1DIV1
1½" Threaded Hub
For use with S1SFBAV ONLY. Permits feedthrough applications. S1SFBAV floor box includes
one (1) threaded hub.
Replacement Universal Cover Mounting Clips
Used to mount SystemOne Universal Cover to
SystemOne metal and non-metallic floor boxes
(S1CFB, S1SFB, S1SFBAV, S1PFB). Includes clips
and ground leads for (5) floor boxes. All SystemOne
Floor Boxes include mounting clips.
S1AVHUB15
S1FBCLIP5PK
Dimensions in Inches (mm)
O-6
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Hubbell SystemOne Sub-Plates
Description
Catalog Number
Style Line® Decorator/GFCI
(2) Style Line® decorator openings
for power and/or datacom
applications.
3 Non-Metallic
3.5
Description
S1SP
S1SP4X4
3 Non-Metallic
S1SP4X415
S1SP4X430
Single Receptacle + Data
Opening for 20 or 30A Twist-Lock®
receptacle (1.56" OD) and (2)
Keystone openings for Hubbell
jacks or flush AV connectors.
S1SPTL
4
S1SPDU
3.5
Metal
Carpet Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" NPT access
holes for power and/or datacom
applications. Universal Cover not
required. Includes carpet flange.
3 Non-Metallic
4
Provided with 15 ft. wire leads
Provided with 30 ft. wire leads
Catalog Number
Duplex/Duplex
(2) Duplex openings for power
and/or datacom applications.
Metal
Hubbell 4 X 4
(4) 20A, 125V receptacles.
(4) Keystone openings for Hubbell
jacks or flush AV connectors.
Power can be wired as single or
two circuit with isolated ground
capability.
Complies with UL514A & C
3.5
Metal
Aluminum Fin.
Brass Finish
Black
Gray
Hubbell DataCom + Power
(1) 20A, 125V receptacle and
3-unit recessed Hubbell iSTATION
opening for data, voice, and AV
applications.
S1SPSL2IM
5
S1SPFFAL
S1SPFFBRS
S1SPFFBL
S1SPFFGY
S1SP3IM
or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) single
Extron® MAAP series adapter
plates or FSR IPS plates.
Hubbell DataCom
1 unit flush Hubbell iSTATION
opening and 3-unit recessed
Hubbell iSTATION opening for
data, voice, and AV applications.
S1SP4IM
4
or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (1) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates.
S1SPEXT2
4
AAP + Power
(1) 20A, 125V receptacle. (2) flush
Keystone and recessed opening
for (2) single Extron® AAP Series
adapter plates.
Metal
Hubbell DataCom + Duplex
(1) Duplex opening, (2) flush Keystone
openings and 1.5 unit recessed
Hubbell iSTATION opening for data,
voice and AV applications.
S1SPFFTAL
S1SPFFTBRS
S1SPFFTBL
S1SPFFTGY
S1SPDU2IM
Active Multimedia + Power
Single 20A, 125V receptacle;
(2) flush Keystone openings;
(1) rectangular Style Line® decorator
opening to accommodate active
multimedia modules or low voltage
outlet frames.
S1SPAMM20
Extron® or FSR
Single-Service
Recessed opening for (2) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates.
S1SPEXT3
S1SPTRAC
5
SYSTIMAX® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for SYSTIMAX®
Connectivity.
S1SP4X4PA
4
3.5
Aluminum Fin.
Brass Finish
Black
Gray
Ortronics TracJack® + Power
(1) 20A, 125V receptacle.
Recessed bezel for (6) Ortronics
TracJack® modules.
5
Panduit Mini Com® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for Panduit
Mini-Com Connectivity.
3 Non-Metallic
S1SPORT
S1SPEXT4
4
S1SPDUSL
Metal
4.5
Ortronics Series II® + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) 1 unit
Ortronics Series II® modules.
Extron®
3.5
5
Extron®
S1SPEXT1
3 Non-Metallic
5
3.5
Extron®
Catalog Number
Tile Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" NPT access
holes for power and/or datacom
applications. Universal Cover not
required. Includes tile flange.
5
Hubbell DataCom +
Style Line® Decorator
(1) Style Line® decorator opening,
(2) flush Keystone openings and
1.5 unit recessed Hubbell
iSTATION opening for data,
voice and AV applications.
Description
Duplex/Style Line® Decorator
(1) Duplex and (1) Style Line®
decorator opening for power and/or
datacom applications.
Siemon MAX® + Power
(1) 20A, 125V receptacle.
Recessed bezel for
(6) Siemon MAX® modules.
S1SP4X4SYS
4
5
S1SPMAX
Signifies minimum depth of concrete pour in inches for Metal Floor Boxes (S1CFB, S1SFB and S1SFBAV) and Non-Metallic Floor Box (S1PFB).
Note: *Furnished with two screw-in flexible metal conduit connectors.
See section W for datacom accessories.
Sub-Plate Accessories
Description
Description
Catalog Number
Replacement Threaded Conduit Plugs
Used with S1SPFFx and S1SPFFTx ONLY.
Sub-plate is supplied with plugs.
6-Port Replacement Data Frames
Used with open systems sub-plates. Sub-plate
is supplied with data frame. Siemon MAX® for
use with S1SPMAX sub-plate.
Ortronics TracJack® for use with
S1SPTRAC sub-plate.
S1DFMAX
Black Style Line® decorator blank frame.
2100BK
Color
1½" Plug
¾" Plug
Aluminum Finish
Brass Finish
Black
Gray
S1FP15AL
S1FP15BRS
S1FP15BL
S1FP15GY
S1FP34AL
S1FP34BRS
S1FP34BL
S1FP34GY
S1DFTRAC
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon Company. Mini-Com® and Panduit® are registered trademarks of
Panduit Corp. SYSTIMAX® is a registered trademark of CommScope, Inc. TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
O-7
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Round Single or Multi-Service
Non-Metallic Concrete Floor Box
Complies with UL514A & C
Dimensions Inches (mm)
Description
D
Catalog Number
Adapter
Required for all applications.
A
PFBA1A
B
C
PFB1
3.00" (76.2)
100 cubic inches prior to cutting level to floor
(19.5 cubic inches per inch of depth).
6.00" (152.4)
7.08" (179.8)
6.69" (169.9)
5.38" (136.5)
(2) 1.0" and (2) ¾" conduit hubs
Min. Depth of Pour
Capacity
Dimensions – A
Dimensions – B
Dimensions – C
Dimensions – D
Hubs
Concrete Cover Included

Low Voltage Divider
Required for use with catalog number
PFB1 when used in multi-service
applications. Accepts Hubbell standard
duplex receptacles or 15A Twist-Lock®
duplex receptacles (HBL4700 series).
PFBT1A
“Y” Adapter
¾ in. “Y” adapter to feed parallel
runs of ¾ in. conduit.
PFBYA1
(2) 1" plugs close off 1" hubs or reduce 1" to ¾"
(2) ¾" plugs close off ¾" hubs or reduce ¾" to ½"
Closure/Reducer Plugs
Note: UL File Number E92074. CSA File Number LR18416.
Flush Round Covers and Flanges
SF39253A
PFBCBRA
PFBCBLA
PFBCGYA
PFBCIA
Brass
Brown
Non-Metallic
Black
Non-Metallic
Gray
Non-Metallic
Ivory
Non-Metallic
S3925
SA3925
S3725
SA3725
S2525
SA2525
S2725
SA2725
S2925
SA2925
S3525
—
S3325
—
Duplex
Flap
Duplex
Screw
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
2¹⁄₈" Single
Receptacle
(Terrazzo Floor)
Multi-Service Cover and
Flange Assemblies
Includes floor box cover with
duplex flaps, (2) ½ in. dia. low
voltage feed through holes
and matching carpet flange.
6.25 in. Diameter
Single Service Covers
Brass
Aluminum
3.88 in. Dia.
Metal Carpet Flange
Adapter Ring
Use with single service covers for carpet applications.
6.25 in. Diameter
Furniture Feed Plate
Use with single service covers
for tile applications.
Unpainted plate with
1 in. threaded opening.
S3082
SA3082
S5016
SA5016
PFBP1
Brass
Brushed Aluminum
Brass
Aluminum
Steel
SF3925
SF2525
SF2725
SF2925
Duplex
Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
One Piece Brass Cover and Carpet Flange
6.25 in. Dia.
Note: Adapter ring S5016 is required for
mounting SF series covers onto PFBA1A.
O-8
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Round Single Service
Metal Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
D
A
B
C
Collar Material:
Brass
Aluminum
Min. Depth of Pour
Adjustability
Before Pour External Height
Adjustment
After Pour Internal
Height Adjustment
Cubic Inch (cm3) Capacity
Dimensions – A
Dimensions – B
Dimensions – C
Dimensions – D
Threaded Access Holes
Knockouts – Sides
Knockouts – Ends
Knockouts – Bottom
B2536
B253641
B2503
BA2536
–
–
3.75" (95.3)
3.75" (95.3)
Fully
Fully
1.25" (31.8)
–
B2537
B2506 B2506415
BA2537
–
–
4.75" (120.7)
3.00" (76.2)
Fully
Fully
–
–
–
4.00" (101.6)
Fully
1.25" (31.8)
3.00" (76.2)
Fully
1.25" (31.8)
.38" (9.5)
.63" (15.9)
.63" (15.9)
.38" (9.5)
.38" (9.5)
.38" (9.5)
33.0 cu. in.
(540.7 cm3)
3.05" (77.5)
4.84" (122.9)
4.84" (122.9)
4.19" (106.4)
(4) ¾"
(4) 1"
–
–
–
–
–
–
36.0 cu. in.
(590.0 cm3)
3.75" (95.3)
5.00" (127.0)
4.63" (117.6)
4.19" (106.4)
(4) ¾"
–
–
–
50.8 cu. in.
(832.5 cm3)
4.75" (120.7)
5.00" (127.0)
4.66" (118.4)
4.19" (106.4)
(4) 1¼" (4) 1½"
–
–
–
–
–
–
30.0 cu. in.
(491.6 cm3)
2.87" (72.9)
4.84" (122.9)
4.84" (122.9)
4.19" (106.4)
(4) ¾"
–
–
–
54.0 cu. in.
(884.9 cm3)
3.88" (98.6)
6.00" (152.4)
4.81" (122.2)
4.19" (106.4)
–
(1) 1" & (1) ¾"
(1) 1¼" & (1) ½"
(3) ½" & (2) ¾"
37.3 cu. in.
(611.2 cm3)
2.91" (73.9)
6.00" (152.4)
4.81" (122.2)
4.19" (106.4)
–
(2) ½" & (1) ¾"
(1) ½" & (1) ¾"
(3) ½" & (2) ¾"
Concrete Cover Included


Closure Plugs Included




B2527
BA2527
B2529
BA2529




–
–
Note: UL File Number E31999.
CSA File Number LR18416.
Suitable for single service applications only.
Single Service Covers
Brass
Aluminum
3.88 in. Dia.
S3925
SA3925
S3725
SA3725
S2525
SA2525
S2725
SA2725
S2925
SA2925
S3525
—
S3325
—
Duplex
Flap
Duplex
Screw
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
2¹⁄₈" Single
Receptacle
(Terrazzo Floor)
S3182
SA3182
S3079
6.25 in. Dia.
S3082
SA3082
Brass
Brushed
Aluminum
Clear
Polycarbonate
Brass
Brushed
Aluminum
Carpet Flanges
5.25 in. Dia.
One Piece Brass Cover and Carpet Flange
6.25 in. Dia.
SF3925
SF2525
SF2725
SF2925
Duplex
Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
www.hubbell-wiring.com
O-9
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Rectangular Non-Metallic Concrete
Floor Boxes with Non-Metallic Covers
Complies with UL514A & C
Dimensions Inches (mm)
Style
1-Gang
2-Gang
3-Gang
PFBRG1*
PFBRG2
PFBRG3
A
E
B
C
D
Min. Depth of Pour
3.00" (76.2)
3.00" (76.2)
3.00" (76.2)
Adjustability
Fully
Fully
Fully
Cubic Inch (cm3) Capacity
Per Gang
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
Dimensions – A
6.00" (152.4)
6.00" (152.4)
6.00" (152.4)
Dimensions – B
3.60" (91.4)
6.82" (173.2)
10.04" (255.0)
Dimensions – C
5.42" (137.7)
5.42" (137.7)
5.42" (137.7)
Dimensions – D
6.90" (175.3)
6.90" (175.3)
6.90" (175.3)
Dimensions – E
5.44" (138.2)
8.66" (220.0)
11.87" (301.5)
Hubs
(4) 1¼"
(6) 1¼"
(8) 1¼"
Reducers
(4) 1" to ¾" and (4) 1¼" to 1"
(6) 1" to ¾" and (6) 1¼" to 1"
(8) 1" to ¾" and (8) 1¼" to 1"
Concrete Cover Included
Closure Plugs Included


Removable LV Barrier
–






Note: UL File Number E92074.
*Suitable for single service applications only.
Flush Rectangular Non-Metallic Covers and Flanges
Required Components for Carpet Applications
Cover with Duplex and Style Line® decorator inserts included
Carpet Flanges
Number of Gangs
Dimensions
1-Gang
6.00" x 4.88"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.35"
One Required per Gang
4.15" x 2.97"
Black
Brown
Gray
Ivory
PFBRFBL1
PFBRFBR1
PFBRFGY1
PFBRFI1
PFBRFBL2
PFBRFBR2
PFBRFGY2
PFBRFI2
PFBRFBL3
PFBRFBR3
PFBRFGY3
PFBRFI3
PFBR826BLA
PFBR826BRA
PFBR826GYA
PFBR826IA
Cover
Duplex
Insert
Style Line®
Decorator Insert
Required Components for Tile Applications
Mounting Collar
Cover Frame
Cover with Duplex and Style Line® decorator inserts included
One Required per Gang
One Required per Gang
Dim. 4.47" x 3.25"
One Required per Gang
4.15" x 2.97"
PFBRMC
PFBRFRA
PFBR826GYA
Cover
O-10
Duplex
Insert
Style Line®
Decorator Insert
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Rectangular Non-Metallic Concrete
Floor Boxes with Metal Covers
Complies with UL514A & C
Dimensions Inches (mm)
Style
1-Gang
2-Gang
3-Gang
PFBRG1*
PFBRG2
PFBRG3
A
E
B
C
D
Min. Depth of Pour
3.00" (76.2)
3.00" (76.2)
3.00" (76.2)
Adjustability
Fully
Fully
Fully
Cubic Inch (cm3) Capacity
Per Gang
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
Dimensions – A
6.00" (152.4)
6.00" (152.4)
6.00" (152.4)
Dimensions – B
3.60" (91.4)
6.82" (173.2)
10.04" (255.0)
Dimensions – C
5.42" (137.7)
5.42" (137.7)
5.42" (137.7)
Dimensions – D
6.90" (175.3)
6.90" (175.3)
6.90" (175.3)
Dimensions – E
5.44" (138.2)
8.66" (220.0)
11.87" (301.5)
Hubs
(4) 1¼"
(6) 1¼"
(8) 1¼"
Reducers
(4) 1" to ¾" and (4) 1¼" to 1"
(6) 1" to ¾" and (6) 1¼" to 1"
(8) 1" to ¾" and (8) 1¼" to 1"
Concrete Cover Included
Closure Plugs Included


Removable LV Barrier
–






Note: UL File Number E92074.
*Suitable for single service applications only.
Flush Rectangular Metal Covers and Flanges
Flush Rectangular Metal Covers and Flanges
Required Components for Carpet and Tile Applications
Required Components for Carpet and Tile Applications
Adapter Collar
(One required per gang)
Adapter Collar
(One required per gang)
Gray
Adapter Frame with Grounding Lug (One
required per gang) Dim. 4.36" x 3.20"
PFBRAC
Brass
Aluminum
S5017G
SA5017G
Gray
Carpet Flanges (Not Required for Tile Applications)
PFBRAC
Rectangular Flanges (Required)
Tapered Flange
Number of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
Brass
Aluminum
SB3083
SA3083
SB3084
SA3084
SB3085
SA3085
SB3083W
SA3083W
SB3084W
SA3084W
SB3085W
SA3085W
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
S2625
SA2625
S2825
—
S3813
SA3813
Duplex
Flap
Duplex
Screw
Style Line®
Decorator Opening
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
www.hubbell-wiring.com
O-11
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Rectangular Cast Iron
Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Cast Iron
Style
2-Gang Deep
1-Gang Deep
D
3-Gang Deep
1-Gang Shallow
2-Gang
Shallow
3-Gang
Shallow
B4314
–
E
A
B
C
Collar Material:
Brass
Aluminum
B2436* B243641* B4233 B423341
BA2436*
–
BA4233
–
B4333 B433361
BA4333
–
Min. Depth of Pour
3.75" (95.3)
3.75" (95.3)
Adjustability
Fully
Before Pour External
Height Adjustment
1.25" (31.8)
After Pour Internal
Height Adjustment
B2437*
–
B2414*
BA2414*
B4214
BA4214
3.75" (95.3)
3.00" (76.2)
2.00" (50.8)
2.00" (50.8)
2.00" (50.8)
Fully
Fully
Fully
Semi
Semi
Semi
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
.38" (9.5)
.63" (15.9)
.63" (15.9)
Cubic Inch (cm3)
Capacity Per Gang
33.0 cu. in.
(540.7 cm3)
36.5 cu. in.
(598.1 cm3)
34.8 cu. in.
(570.3 cm3)
30.0 cu. in.
(491.7 cm3)
16.0 cu. in.
(262.2 cm3)
16.0 cu. in.
(262.2 cm3)
16.0 cu. in.
(262.2 cm3)
Dimensions – A
3.20" (81.3)
3.38" (85.9)
3.38" (85.9)
2.90" (73.7)
2.00" (50.8)
2.00" (50.8)
2.00" (50.8)
Dimensions – B
4.69" (119.1)
4.84" (122.9)
4.90" (122.5)
4.69" (119.1)
5.46" (138.7)
5.46" (138.7)
5.46" (138.7)
Dimensions – C
4.69" (119.1)
8.06" (204.7)
11.41" (289.8)
4.69" (119.1)
4.19" (106.4)
7.49" (190.2)
10.7" (271.8)
Dimensions – D
4.36" (110.7)
4.36" (110.7)
4.36" (110.7)
4.36" (110.8)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
Dimensions – E
3.19" (81.0)
6.42" (163.1)
9.64" (244.9)
3.20" (81.3)
3.19" (81.0)
6.38" (162.1)
9.56" (242.8)
Threaded Access
Holes
(4) ¾"
(6) ¾"
(8) ¾"
(4) ¾"
(2) ¾"
(4) ¾"
(6) ¾"
(4) 1"
(4) 1" &
(2) ¾"
.38" (9.5)
(6) 1" &
(2) ¾"
–
–
–
Concrete Cover
Included







Closure Plugs
Included







Removable
LV Barrier
–


–
–
–
–
Note: UL File Number E92074.
CSA File Number LR18416.
*Suitable for single service applications only.
Carpet Flanges
Tapered Flange
Number of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
Brass
Aluminum
Clear Polycarbonate
SB3083
SA3083
S3083
SB3084
SA3084
S3084
SB3085
SA3085
S3085
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
S2625
SA2625
S2825
—
S3813
SA3813
Duplex
Flap
Duplex
Screw
Style Line®
Decorator Opening
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
Dimensions in Inches (mm)
O-12
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Rectangular Stamped Steel
Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
D
1-Gang
Deep
2-Gang
Deep
3-Gang
Deep
1-Gang
Shallow
2-Gang
Shallow
3-Gang
Shallow
1-Gang
Deep
1-Gang
Shallow
B2431*
BA2431*
B2432
BA2432
B2433
BA2433
B2421*
BA2421*
B2422
BA2422
B2423
BA2423
B2427*
–
B2429*
–
E
A
B
C
Collar Material:
Brass
Aluminum
Min. Depth of Pour
3.75" (95.3)
3.75" (95.3)
3.75" (95.3)
2.75" (69.9)
2.75" (69.9)
2.75" (69.9)
4.00" (101.6)
3.00" (76.2)
Adjustability
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
After Pour Internal
Height Adjustment
.50" (12.7)
.50" (12.7)
.50" (12.7)
.50" (12.7)
.50" (12.7)
.50" (12.7)
.38" (9.5)
.38" (9.5)
Cubic Inch (cm3)
Capacity Per Gang
60.0 cu. in.
(983.2 cm3)
52.8 cu. in.
(865.2 cm3)
50.8 cu. in.
(832.5 cm3)
39.5 cu. in.
(647.3 cm3)
35.0 cu. in.
(573.5 cm3)
34.0 cu. in.
(557.2 cm3)
54.0 cu. in.
(884.9 cm3)
37.3 cu. in.
(611.2 cm3)
Dimensions – A
3.72" (94.5)
3.72" (94.5)
3.72" (94.5)
2.74" (69.6)
2.74" (69.6)
2.74" (69.6)
3.90" (99.1)
2.81" (71.4)
Dimensions – B
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
Dimensions – C
6.00" (152.4)
9.25" (235.0)
12.50" (317.5)
6.00" (152.4)
9.25" (235.0)
12.50" (317.5)
6.00" (152.4)
6.00" (152.4)
Dimensions – D
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.2)
4.38" (111.2)
Dimensions – E
3.19" (81.0)
6.44" (163.6)
9.67" (245.6)
3.19" (81.0)
6.44" (163.6)
9.67" (245.6)
3.19" (81.0)
3.19" (81.0)
Knockouts – Sides
(1) ¾",1",1¼"
(2) ¾",1",1¼"
(3) ¾",1",1¼"
(2) ½",(1) ¾"
(4) ½",(1) ¾"
(6) ½",(1) ¾"
(1) ½",(1) 1¼"
(2) ½",(1) ¾"
Knockouts – Ends
(1) ¾",1",1¼"
(1) ¾",1",1¼"
(1) ¾",1",1¼"
(1) ½",(1) ¾"
(2) ½",(1) ¾"
(2) ½",(1) ¾"
(1) ¾",(1) 1"
(1) ½",(1) ¾"
Knockouts – Bottom
(2) ¾",1",1¼"
(4) ¾",1",1¼"
(6) ¾",1",1¼"
(2) ¾",1",1¼"
(4) ¾",1",1¼"
(6) ¾",1",1¼"
(3) ½",(2) ¾"
(3) ½",(2) ¾"
Before Pour External
Height Adjustment
Concrete Cover
Included








Closure Plugs
Included
–
–
–
–
–
–
–
–
Removable
LV Barrier
–


–


–
–
Note: UL File Number E92074.
CSA File Number LR18416.
*Suitable for single service applications only.
Carpet Flanges
Tapered Flange
Number of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
Brass
Aluminum
Clear Polycarbonate
SB3083
SA3083
S3083
SB3084
SA3084
S3084
SB3085
SA3085
S3085
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
S2625
SA2625
S2825
—
S3813
SA3813
Duplex
Flap
Duplex
Screw
Style Line®
Decorator Opening
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-13
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed 2-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
2-Gang
2-Gang
3SFBSS
3SFBC
A
B
C
Min. Depth of Pour
3.00" (76.2)
3.00" (76.2)
Adjustability
Before pour
Before pour
Cubic Inch (cm3) Capacity
Per Chamber
22.4 cu. in.
(367.1 cm3)
21.6 cu. in.
(354.0 cm3)
Dimensions – A
2.88" (73.2)
3.00" (76.2)
Dimensions – B
12.20" (309.9)
12.88" (327.2)
Dimensions – C
5.52" (140.2)
6.00" (152.4)
Sides (2) ¾"
Ends (1) 1¼"
Center Area (1) 1¼" (each side)
–
Threaded Access Holes
Sides (2) ¾"
Ends (1) 1"
Center Area (1) Concentric 1",
1¼" (each side)
Knockouts
Concrete Cover Included

Closure Plugs Included
–
–


(1) 3SFBRP and (1) 3SFBTP
Face Plates Included
(1) 3SFBRP and (1) 3SFBTP
Note: UL File Number E31999.
CSA File Number LR18416.
Accessories
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Floor Box Covers with Carpet Recess
Reinforced Non-Metallic Cover
Dimensions
11.88" x 5.20"
3SFBCBRA
3SFBCBKA
3SFBCGYA
3SFBCIA
Brown
Black
Gray
Ivory
Face Plates
3SFBRP
3SFBDS
3SFBS
3SFBB
3SFBTP
3SFBIM
Duplex
Knockout
Style Line®
Decorator Opening
Single Receptacle
Opening
(1.39" boss dia.)
Blank
Voice/Data
(2) Jack Knockouts
(.6" x .75")
3-Unit iSTATION Opening
(See Network Wiring section
for module options)
Dimensions in Inches (mm)
O-14
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed 4- and 8-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
4-Gang Deep
4-Gang Shallow
8-Gang Deep
4-Gang Shallow
HBLCFB301BASE
HBLCFB401BASE
HBLCFB501BASE
HBLCFB401CB
A
B
C
Min. Depth of Pour
4.25" (107.6)
3.00" (76.2)
5.25" (133.4)
3.25" (82.6)
Adjustability
Before pour
Before pour
Before pour
Before pour
Cubic Inch (cm3) Capacity
Per Chamber
29.5 cu. in.
(483.4 cm3)
25.5 cu. in.
(417.9 cm3)
49.5 cu. in.
(811.2 cm3)
25.5 cu. in.
(417.9 cm3)
Dimensions – A
4.0" (101.6)
2.63" (66.8)
5.13" (130.3)
3.13" (79.5)
Dimensions – B
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
Dimensions – C
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
Threaded Access Holes –
Per Chamber
–
–
(1) Concentric ½", ¾"
(1) Concentric ¾", 1"
(1) 1¼"
Knockouts – Per Chamber
–
(3) Concentric ½", ¾"
(2) 1"
(1) Concentric ½", ¾"
(1) Concentric ¾", 1"
(1) 1¼"
Concrete Cover Included



Closure Plugs Included
–
–
–
–


Note: UL File Number E197203.
CSA File Number LR702145.
Floor Box Covers with Carpet Recess
Accessories
Die Cast Metal Cover and Flange Assembly
Dimensions 10.69" x 10.69"
HBLTCGNTSW
HBLTCGNTBKSW
On-grade Barrier
Granite
The on-grade barrier is intended for use on
installations at grade level. This accessory
is installed prior to the concrete pour and
provides a barrier between the soil. The
on-grade barrier comes with leveling feet
and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Black
Hubbell – Screw Type Face Plates*
2.00"
HBLST302SGY
HBLDE301SGY
HBLTO310SGY
HBLTL318SGY
HBLTL319SGY
HBLBL300SGY
Duplex
Style Line®
Decorator
Toggle
Single Receptacle
(1.56" Boss Dia.)
Single Receptacle
(1.39" Boss Dia.)
Blank
HBLIMFSGY
HBL317SGY
3-Unit Hubbell iSTATION
Hubbell
6-Port
4.50"
Typical
(See Network Wiring section
for module options)
Open Systems – Screw Type Face Plates*
HBLAM303SGY HBLAMP313SGY HBLKR314SGY HBLLT309SGY HBLPA308SGY
AMP-ACO
AMP 6-Port
Krone®/Leviton®
SYSTIMAX®
Panduit
Mini-Com®
HBLNO309SGY
NORDX® 6-Port
(Cat. 5e jacks only)
HBLSI305SGY HBLSI315SGY
Siemon
CT® Series
HBLOR306SGY HBLORT322SGY
Siemon
MAX® Series
Ortronics
Series II®
Ortronics
TracJack®
Note: *Catalog numbers indicated are gray, replace “GY” with the following to designate color: “BK” for Black, “I” for Ivory and “WA” for White.
AMP is a registered trademark of Tyco Electronics Corp. Krone® is a registered trademark of Krone, Inc. Leviton® is a registered trademark of Leviton. SYSTIMAX® is a
registered trademark of CommScope, Inc. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. NORDX® is a registered trademark of Belden/CDT, Inc.
MAX® and CT® Series are registered trademarks of The Siemon Company. TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-15
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed 6-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
6-Gang
6-Gang
A
B
C
LCFBSSA
LCFBCA
Min. Depth of Pour
3.50" (88.9)
3.65" (92.7)
Adjustability
Fully
Fully
Cubic Inch (cm3) Capacity
Per Chamber
(4) at 38.2 cu. in. (626.0 cm3)
(2) at 25.4 cu. in. (416.2 cm3)
(4) at 36.8 cu. in. (603.0 cm3)
(2) at 25.4 cu. in. (416.2 cm3)
Dimensions – A
6.18" (157.0)
6.35" (161.3)
Dimensions – B
12.95" (328.9)
13.11" (333.0)
Dimensions – C
12.95" (328.9)
13.11" (333.0)
–
(1) ¾" & (1) 1¼"
Threaded Access Holes – Per Chamber
(1) Concentric 1", 1¼"
(1) ¾"
Knockouts – Per Chamber
–
Concrete Cover Included

Closure Plugs Included
–
Cover Mounting Brackets Included*




Note: *Replacements Mounting Brackets available, (1 pair) LCFBBRACKET.
UL File Number E31999. CSA File Number LR18416.
Accessories
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Recessed Floor Box Covers
Smooth Metallic Cover,
Flange and Cable Doors
for Carpet Applications
Cover Dimensions
10.30" x 10.30"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALTC
LCFBCBRSTC
LCFBCBKTC
LCFBCGYTC
Metallic Cover,
Flange and Cable Doors
for Carpet Applications –
Carpet Insert Required
Cover Dimensions
10.30" x 10.30"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALC
LCFBCBRSC
LCFBCBKC
LCFBCGYC
Reinforced Non-Metallic Cover,
Flange and Cable Doors
for Carpet Applications –
Carpet Insert Required
Cover Dimensions
10.30" x 10.30"
Black
Brown
Gray
Ivory
LCFBCBKA
LCFBCBRA
LCFBCGYA
LCFBCIA
Smooth Metallic Cover and
Cable Doors for Tile Applications
Cover Dimensions
8.31" x 7.70"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALT
LCFBCBRST
LCFBCBKT
LCFBCGYT
Face Plates
4.52"
LCFBP8
LCFBP26
LCFBP720
LCFBIM
LCFBP14
Duplex
Style Line®
Decorator Opening
Single Receptacle
(for 1.56" boss dia.)
3-Unit Hubbell iSTATION
(See Network Wiring section
for module options)
Blank
1.88"
4.04"
Typical
Dimensions in Inches (mm)
O-16
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Large Capacity Concrete Floor Boxes
with Round Cover
Complies with UL514A
Hubbell’s LCFB Adapter System allows users to integrate Hubbell’s
SystemOne Round Covers with Hubbell’s Six-Gang Large Capacity
Floor Box. This combination provides greater capacity, durability,
flexibility with an attractive finish. Covers are available in a variety of
architectural finishes including brass, nickel and aluminum. These
covers provide a common round look and finish between Hubbell
SystemOne Recessed Fire-Rated Poke-Throughs and the Six-Gang
Large Capacity Floor Box (with the use of the LCFB adapter) —
enhancing building decor.
The round shape of the SystemOne cover allows for the products
to be installed in any location or orientation without having concern
for parallel lines in the building floor while the device capacity of the
Large Capacity Floor Box allows for power, data and audio visual to
be combined into a common floor box.
• Round cover to match Fire-Rated Poke-Through installations
• Eight distinct mounting directions
• Drop down cable access doors to reduce trip hazards
• Post pour adjustability
• Egress door brushes reduce ingress of dirt
• Five aesthetically pleasing finishes
Dimensions Inches (mm)
Style
6-Gang
A
B
C
LCFBS1R8ADAPT
Adjustability
Post pour
Vertical Adjustability Range
¹⁄₈" minimum to ³⁄₈" maximum finished floor height
Dimensions – A
.89" (22.6)
Dimensions – B
10.13" (257.3)
Dimensions – C
9.25" (235.0)
Cover Orientation Positions
Eight (8); every 45°
Material
Galvanized sheet metal
Compatible Floor Boxes
LCFBSSA, LCFBCA
Note: *Will sit approximately 1/8" above level of concrete floor after installation. Concrete will need to be graded after initial pour to remove potential ridges.
Compatible SystemOne Recessed 8" Covers
Finish
Catalog Number
Brushed Aluminum
S1R8CVRALU
Black Powder Coat
S1R8CVRBLK
Brushed Brass Plated
S1R8CVRBRS
Bronze Plated Finish
S1R8CVRBRZ
Satin Nickel Plated
S1R8CVRNKL
Brushed
Aluminum
Black
Powder Coat
Brushed
Bronze Plated
Brass Plated
Finish
Satin Nickel
Plated
Note: Must order adapter LCFBS1R8ADAPT when using S1R8CVRxxx covers on
LCFBxx floor boxes.
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-17
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed 7- and 11-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
CFB7G Series
CFB11G Series
7-Gang
11-Gang
A
B
C
CFB7G4
4.08" (103.5)
CFB7G6
6.08" (154.3)
CFB11G4
4.08" (103.5)
CFB11G6
6.08" (154.3)
Before Pour
4.08" (103.5)
10.0" (254.0)
12.2" (309.9)
Before Pour
6.08" (154.3)
10.0" (254.0)
12.2" (309.9)
Before Pour
4.08" (103.5)
13.5" (342.9)
12.2" (309.9)
Before Pour
6.08" (154.3)
13.5" (342.9)
12.2" (309.9)
Back
(4) x 1", 1¼" Concentric
(3) x 1", 1¼", 1½" Concentric;
(1) x 2"
(4) x 1", 1¼", 1½" Concentric
(3) x 1", 1¼", 1½" Concentric;
(1) 2"
Bottom
(4) x 1", 1¼", 1½" Concentric
(4) x 1", 1¼", 1½" Concentric
X - 1.01"
Y - 2.41"
Z - 3.51"
X - 2.37"
Y - 3.77"
Z - 3.65"
(4) x 1", 1¼" Concentric
(2) ¾", 1" Concentric;
(4) 1", 1¼", 1½" Concentric,
(1) 2"
(5) 1", 1¼", 1½" Concentric;
(2) ¾", 1" Concentric
X - 1.02"
Y - 2.42"
Z - 3.50"
(4) x 1", 1¼", 1½" Concentric
(2) ¾", 1" Concentric;
(4) 1", 1¼", 1½" Concentric,
(1) 2"
(5) 1", 1¼", 1½" Concentric;
(2) ¾", 1" Concentric
X - 2.37"
Y - 3.81"
Z - 3.72"
(1) 1-Gang
(1) 2-Gang
(1) 4-Gang
(1) 1-Gang
(1) 2-Gang
(1) 4-Gang
(2) 1-Gang
(1) 3-Gang
(1) 6-Gang
(2) 1-Gang
(1) 3-Gang
(1) 6-Gang
Min. Depth of Pour
Adjustability
Dimensions:
A
B
C
Trade Size Knockouts:
Sidewalls
Side View
Depth behind
mounting
plate
Y
Z
X
Accepts industry
standard size wallplates (sold
separately)
Interior Configuration
1-Gang
2-Gang
1-Gang
3-Gang
4-Gang
6-Gang
Note: UL File Number E31999.
CSA File Number LR18416.
Accessories
CFBOGPAN4
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Floor Box Covers
CFB7G Series
CFB11G Series
Brass
Flange and cover;
Beveled edge for carpet
CFB7CVRBRS
Flange and cover;
Square edge for tile
CFB7TBRS
Aluminum
Brass
¼" Edging
Aluminum
¼" Edging
CFB7CVRALU
CFB11CVRBRS
CFB7TALU
CFB11TBRS
½" Edging
CFB11CVRALU
¼" Edging
CFB11TALU
Note: Covers provide a recessed area, allowing floor covering to be inserted.
Dimensions in Inches (mm)
O-18
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed Ballroom Series Floor Boxes
Complies with UL514A
8-Gang 20,000 lb Cover
Dimensions Inches (mm)
Style
CFB8FC Series
8-Gang
8-Gang
C
B
A
CFB8FC1
Application
Min. Depth of Pour
CFB8FC2
Carpet
Tile, Finished Concrete
6.95” [177mm]
7.15” [182mm]
Before Pour
Before Pour
Dimensions:
A
B
C
6.95" (176.5)
15.00" (176.5)
13.00" (330.2)
7.15" (181.6)
14.75" (374.7)
12.75" (323.9)
Trade Size
Knockouts:
Sidewalls
Back
Bottom
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
X = 2.27" (57.7)
Y = 4.01" (101.9)
Z = 3.13" (79.5)
X = 2.27" (57.7)
Y = 4.01" (101.9)
Z = 3.13" (79.5)
One, two, three and four gang plates.
Customer configuration dependant.
One, two, three and four gang plates.
Customer configuration dependant.
Adjustability
Side View
Depth behind
mounting
plate
Y
Z
X
Accepts industry standard
size wallplates (sold separately)
4.63" Maximum Cover Height
4-Gang
4-Gang
4-Gang
4-Gang
Accessories
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Covers
CFB8FC1 Covers
CFB8FC2 Covers
All ballroom floor box covers are
machined from Aluminum and have
no additional finish options
Carpet Cover, with 2 egress doors (0.20” depth)
Flush cover, with 2 egress doors
Blank box cover
Cover Load Ratings*:
Recommended Loading
Maximum Load
CFB8CVRALU1
–
–
–
–
CFB8JBC1
–
CFB8CVRALU2
–
–
–
CFB8JBC2
20,000 lb
40,000 lb
20,000 lb
40,000 lb
20,000 lb
40,000 lb
20,000 lb
40,000 lb
Note: *Load applied through 3" (76mm) mandrel in center of cover. Loads are static and don't apply to rolling loads.
www.hubbell-wiring.com
Dimensions in Inches (mm)
O-19
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Floor Boxes for Wooden Floors
Complies with UL514A
Dimensions Inches (mm)
Style
Rectangular Stamped Steel
2-Gang
1-Gang
C
Round Cast Iron
1-Gang
3-Gang
1-Gang
A
A
B
B
C
Collar Material
Brass
B2481*
B2482
B2483
B2588*
B2588275*
Adjustability
Semi
Semi
Semi
Non
Non
Cubic Inch (cm3) Capacity
Per Gang
42.0 cu. in.
(658.3 cm3)
42.5 cu. in.
(696.5 cm3)
42.5 cu. in.
(696.5 cm3)
18.5 cu. in.
(303.2 cm3)
18.5 cu. in.
(303.2 cm3)
Dimensions – A
3.13" (79.5)
3.13" (79.5)
3.13" (79.5)
3.65" (92.7)
3.65" (92.7)
Dimensions – B
4.50" (114.3)
4.50" (114.3)
4.50" (114.3)
3.22" (81.8)
3.22" (81.8)
Dimensions – C
3.20" (81.3)
6.42" (163.1)
9.64" (244.9)
4.09" (103.9)
4.09" (103.9)
Sides (2) ¾"
Bottom (2) ½"
–
–
Threaded Access Holes
–
(1) ½", ¾", 1"
Knockouts – Sides
(2) ½", ¾", 1"
–
Knockouts – Ends
–
–
Bottom (2) ½"
(3) ½", ¾", 1"
–
–
–
–
(1) ½" - 1¼"
(2) ½" - 1¼"
(3) ½" - 1¼"
–
–
Debris Cover Included



–
–
Closure Plugs Included
–
–
–


Removable LV Barrier
–


–
–
Knockouts – Bottom
Note: UL File Number E31999. CSA File Number LR18416.
*Suitable for single service applications only.
Rectangular Flanges (Required)
Round Flanges
Round Covers (3.88" Dia.)
Brass
Aluminum
SB3083W
SA3083W
SB3084W
SA3084W
SB3085W
SA3085W
S3182
SA3182
S3082
SA3082
S3925
SA3925
S3725
SA3725
S2525
SA2525
No. of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
5.25" Dia.
6.25" Dia.
Duplex Flap
Duplex Screw
2¹⁄₈" x ¾" Comb.
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
Brass
Aluminum
Dimensions
4.15" x 2.99"
Round Covers
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
Duplex
Flap
Duplex
Screw
Style Line®
Decorator
Opening
2¹⁄₈" x ¾"
Combination
S2625
SA2625
S2825
–
S3425
–
S3813
SA3813
Brass
Aluminum
3.88" Dia.
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
S2925
SA2925
S3525
–
S3325
–
2¹⁄₈" x 1" Comb.
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
2¹⁄₈" Single Rec.
(Terrazzo Floor)
One Piece Brass Cover and Carpet Flange
Brass
6.25" Dia.
2¹⁄₈" x 1"
Combination
S2725
SA2725
SF3925
SF2525
SF2725
SF2925
Duplex Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
Dimensions in Inches (mm)
O-20
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Above-Floor Service Fittings (Single Service)
Hubbell offers a variety of above-floor service pedestals to satisfy just about any
requirement. Large capacity enables a choice of services—you can even create your
own unique pedestal to satisfy specific requirements. Above floor service fittings are
ideal for furniture feed applications.
Pedestals – Metallic – LO-CON (single service only)
Traditional metallic pedestals with die-cast aluminum frame, brushed aluminum housing and
stainless steel faceplates. These pedestals are offered as component parts. They mount
on floor box covers or floor deck/duct systems with ¾-inch or 1-inch threaded openings.
Create Pedestal – Create your own pedestal to meet
specific service requirements. Order housing, face
plates and devices separately.
SC3098A
SC3099A
Description
Catalog Number
Frame, housing, ¾ in. chase nipple, without plates.
Frame, housing, 1 in. chase nipple, without plates.
Blank plate.
Telephone bushing with 1 in. I.D. and (2) ³⁄₈ in. KO for coax.
Single receptacle plate with 1.39 in. (35.3) opening.
Duplex receptacle plate.
Style Line® decorator plate.
SC3098A
SC3099A
SS309B
SS309T
SS309S
SS309D
SS309DS
SS309D
SS309DS
3.00"
(76.2)
2.62"
(66.5)
Furniture Feed Plates – Use with SC3098A or SC3099A housings
to feed furniture systems in office settings or display cases in
retail applications.
Description
Catalog Number
Aluminum plate with ¾ in. trade size knockout.
Aluminum plate, blank.
SS309SF
SS309BF
2-Gang
Note: When using SS309SF on Hubbell’s LO-CON pedestals, SS309BF must be used on the opposite side.
2.88"
(73.1)
Pedestals – Specialized Service – Large Capacity Pedestals
(single service only)
Designed to accommodate receptacles up to 50A (4-gang only). These brushed aluminum
pedestals are furnished with either a ¾-inch or 1-inch hub and are designed for mounting to
floor box covers with ¾-inch or 1-inch threaded openings. Create your own unique pedestal
with a wide choice of stainless steel plates and devices.
Description (2-Gang Housing)
Catalog Number
2-gang (front and back) with ¾ in. hub.
2-gang (front and back) with 1 in. hub.
SA6685
SA6686
4.38"
(111.3)
2.63"
(66.8)
2.50"
(63.5)
5.63"
(143.0)
1"
(25.3)
SA6685
SA6686
Plate Option – 1-Gang
Description
Catalog Number
Duplex opening.
Style Line® decorator opening.
Single receptacle opening – boss diameter
1.36 to 1.39 in. (34.5 to 35.3).
Single receptacle opening – boss diameter
1.55 to 1.58 in. (39.4 to 40.1).
Blank plate.
SS8
SS26
SS7
Description (4-Gang Housing)
Catalog Number
4-gang (2 front and 2 back), with ¾ in. hub.
4-gang (2 front and 2 back), with 1 in. hub.
SA6687
SA6688
SS7
4.69"
(119.1)
SS13
2.50"
(63.5)
5.63"
(143.0)
Plate Option – 2-Gang
Catalog Number
Two duplex openings.
Two Style Line® decorator openings.
Two single receptacle openings – boss diameter
1.36 to 1.39 in. (34.5 to 35.3).
Single receptacle opening – boss diameter
2.41 to 2.44 in. (61.2 to 62.0).
Single receptacle opening – boss diameter
2.09 to 2.13 in. (53.1 to 54.1).
Blank plate.
SS82
SS262
SS72
www.hubbell-wiring.com
SS26
4-Gang
SS720
Description
SS720
1"
(25.3)
SA6687
SA6688
SS701
SS703
SS23
SS82
SS262
Dimensions in Inches (mm)
O-21
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Non-Metallic Floor Box For Concrete Floors
Residential Delivery Systems
The Hubbell Round Non-Metallic Floor Box offers an economical solution for electrical power or a combination of power and
voice/data applications. Designed specifically for slab-on-grade installation. Quick and easy installation is assured using a
push in place leveling system.
Removable neoprene gaskets
allow for independent use of either
side of the receptacle with the
cover closed
Pre-assembled flange;
cover and leveling ring
for quick installation
Recessed receptacle minimizes plug
protrusion; allowing furniture to be
located over the plug
Cut box after pour for
height adjustment
Apply PVC glue to the leveling ring
and simply push into place; hold
and wait 10 seconds; automatically
levels the cover to the floor
Parallel PVC hubs for
1 and ¾ inch conduit
The Right Choice for that Perfect Finishing Touch!
Solid Brass
Almond
Black
Chestnut Brown
Gray
Note: Not all configurations are available in all colors. See below for details.
Floor Box for Structural Concrete Floors
RF406BK
RF400
Description
Material
Color
Catalog Number
Flange and hinged door cover assembly; includes tamperresistant duplex receptacle 15A 125V; gasket; floor leveling
PVC ring; high impact and chemically resistant nylon; factory
pre-assembled for easy drop-in installation.
Solid Brass
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
—
Almond
Black
Chestnut Brown
Gray
RF406BR
RF406AL
RF406BK
RF406BN
RF406GY
Flush fit for hardwood and tile floors (same as above).
Solid Brass
Floor box with concrete protective cover; accepts ¾ in. and
1 in. schedule 40 and schedule 80 PVC conduit; includes
round box (4 7/8 in. dia. x 6.0 in. deep); four reducers;
closure plugs; and concrete cover with locator flag.
PVC
Gray
RF400
Hinged nylon replacement door cover; includes neoprene
gasket to seal plug openings; replacement cover for
RF406 series.
4.6"
Solid Brass
(117)
Thermoplastic
PVC
Thermoplastic
P-7853-01
98 CU. IN.
Thermoplastic
(1600 cm ) MAX
VOL. 16 CU IN
Thermoplastic
(266 cm ) PER
—
Almond
Black
Chestnut Brown
Gray
RF407BR
RF407AL
RF407BK
RF407BN
RF407GY
3
RF407BK
4.6"
(117)
O-22
RF408
6.8" (173)
Ø 5.0" (127)
PVC
P-7853-01
98 CU. IN.
(1600 cm3) MAX
VOL. 16 CU IN
(266 cm3) PER
IN OF DEPTH
MINIMUM CONCRETE
DEPTH 4 IN (10.2 cm)
Dimensions in Inches (mm)
Ø 4.7"
(119)
4.6" (117)
4.6"
(117)
4.6"
(117)
IN OF DEPTH
DEPTH 4 IN (10.2 cm)
Dimensions Inches (mm)
RF408
3
Thermoplastic
Gray
MINIMUM CONCRETE
Low voltage divider; for use in PVC box RF400; when
JLOAD® multimedia outlet is used.
RF409BR
—
6.0"
(152)
Ø 4.7"
(119)
4.6" (117)
6.8" (173)
Ø 5.0" (127)
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Flush Floor Boxes for Wooden Floors
Residential Delivery Systems
Removable neoprene
gaskets allow for
independent use
of either side of the
receptacle with
the cover closed
Low voltage divider
optional provides
for power and
voice/data in a
compact space
Back and side
knockouts for proper
wiring access
Pre-assembled flange
and cover for fast
installation
Drop-In Floor Box
Top screw fastening
and side joist mounting
provided
Solid brass
flange and
cover
Recessed receptacle
minimizes plug
protrusion; allowing
furniture to be located
over the plug
Line and
low voltage
options
For use with single
or feed through
service
Strain relief
Ample wiring room
Low profile
2½ inch hole
Height accessible
adjustments after the
box is mounted
Note: Template cutout provided with instructions for proper installation.
The Right Choice for that Perfect Finishing Touch!
Solid Brass
Brass Plated
Chrome Plated
Copper Plated
Note: Not all configurations are available in all colors. See below for details.
Nickel Plated
Stainless Finish
Almond
Black
Chestnut Brown
Floor Boxes for Structural Wood Floors
Description
Material
Finish
Cat. Number
Material
Finish
Cat. Number
Decorator duplex receptacle floor
box kit; includes steel box, flange
and hinged door cover assembly
with 15A 125V tamper-resistant
duplex receptacle; designed for
installation in wood floors; mounts
to sub-floor or joists.
Solid Brass
Aluminum
Aluminum
Aluminum
Aluminum
Clear Lacquer
Stainless Paint
Almond Paint
Black Paint
Chestnut Brown Paint
RF515BR
RF515SS
RF515AL
RF515BK
RF515BN
Aluminum
Aluminum
Aluminum
Aluminum
Brass Plated
Chrome Plated
Copper Plated
Nickel Plated
RF515BP
RF515CH
RF515CU
RF515NI
Aluminum
Aluminum
Aluminum
Aluminum
Brass Plated
Chrome Plated
Copper Plated
Nickel Plated
RF506BP
RF506CH
RF506CU
RF506NI
Flush fit for hardwood and tile floors Solid Brass Clear Lacquer
(same as above).
RF509BR
Flange and hinged door cover
assembly; includes tamper-resistant
duplex receptacle; neoprene gaskets;
for use with steel box RF500.
RF506BR
RF506SS
RF506AL
RF506BK
RF506BN
Solid Brass
Aluminum
Aluminum
Aluminum
Aluminum
Clear Lacquer
Stainless Paint
Almond Paint
Black Paint
Chestnut Brown Paint
RF515BR
Adjustable floor box; 3 inch deep; three (3) ½ inch knockouts: one on bottom;
one on each side; non-metallic sheathed cable clamps on each side.
Steel
RF500
–
RF506BR
4.8"
Ø 5.6"
Drop-In Floor Box for Structural
Wood
Floors
(121)
(143)
Description
Material
Drop-in floor box; mounts in 2.50 inch hole opening; includes solid brass cover;
single 125V tamper-resistant receptacle;
optional device mounts
for two
3.2"
4.8"
(81) resistant box.
voice/data video ports; suitable for (121)
feed through circuitry; impact
Solid Brass 15 Amp
Solid Brass 20 Amp
Dimensions Inches (mm)
Ø 5.6"
(143)
Drop-In Floor Box
0.9"(22)
Ø 2.5"
(63)
0.3"
(8)
3.2"
(81)
4.8"
(121)
3.1"
(80)
½"
Knockout
3 Places
0.2"
(5)
Ø 3.4"
(86)
Ø 3.4"
(86)
7.8"
(197)
RF151R
Dimensions in Inches (mm)
2.4" (61)
0.3"
www.hubbell-wiring.com
(8)
0.2"
(5)
2.9"
(75)
4.8"
(121)
0.9"
(22)
0.9"(22)
RF500
2.9"
(75)
2.4" (61)
4.8"
(121)
Cat. Number
RF151R
RF201R
Ø 2.5"
(63)
0.9"
(22)
Wood Floor Boxes
Rating
7.8"
(197)
O-23
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
4.8"
Floor Boxes
Accessories
Experiencing a problem? Let Hubbell accessories help solve it. Hubbell stacking
(adjustable) collars are the answer if the box is set too low. Need a replacement? Choose
from a full line of replacement covers and fittings. Hubbell accessories also help you with
the protection you need for plugs and receptacles.
Cover
Frame
Adjustable
Collar
Problem Solvers and Replacement Components
Stacking (Adjustable) Collars and Frames
Designed to be used if floor box is set too low beneath the floor surface or the adjustable collar and/or adapter on the box
is damaged.
Adapter
Box
Replacement Adjustable Collar
If the box number is...
Extension Value
Use Collar Number
B2429, B2427, B2436 or B2437
B2503, B2506
B2529, B2536, B2527 or B2537
B4233
B4333
.81" (20.5)
1.06" (26.9)
1.06" (26.9)
1.03" (26.2)
1.03" (26.2)
C2400*
C2504*
C2500*
C4200*
C4300*
Note: *Only available as sets (collars and adapters). In cases where the adapter on the floor box is not damaged, and only
stacking is required, discard the adapter and use only the collar. The adjustable collars listed above can be stacked
as required to reach the floor surface. Longer screws will be required if more than one collar is stacked (screws not
provided). These screws are commercially available. Flat head #12-24 UNC machine screw x (approx. length). Minor
Upward Adjustments: Round or Rectangular cover frames (trim rings) may be stacked if the floor box is only slightly
recessed below the floor surface.
Replacement Components for Floor Box
Covers and Fittings
Catalog Number
Box Type
C2400
C4200
Dimension
Round
4.19" (106.4) diameter
Rectangular
3.19" (81.0) x 4.38" (111.2)
Rectangular, grounding 3.19" (81.0) x 4.38" (111.2)
Extension Value
Brass
Aluminum
.31" (7.9)
.31" (7.9)
.31" (7.9)
S5016
S5017A
S5017G
SA5016
SA5017A
SA5017G
Replacement Cover Frames
Crown Plugs
Catalog Number
S5016
S5017A
Description
Used in the following covers
Brass
Aluminum
¾" thread size.
S2525, SA2525, S881, S2555,
S2530, S2425, SA2425, SF2525
S2725, SA2725, S2755, S2730,
S2625, SA2625, SF2725
S5012
SA5012
S5013
SA5013
1" thread size.
S5017G
Flush Cap Rings
Crown Plugs
S5012
S5013
Flush Cap Rings
Catalog Number
Description
Used in the following covers
Brass
Aluminum
2¹⁄₈" threaded plug with
¾" thread size opening.
2¹⁄₈" threaded plug
with 1" thread
size opening.
S2525, SA2525, S881, S2555,
S2530, S2425, SA2425, SF2525
S2725, SA2725, S2755, S2730,
S2625, SA2625, SF2725
S5010
SA5010
S5025
SA5025
Flush Plugs
Catalog Number
Description
Used in the following covers
Brass
Aluminum
Flush Plugs
¾" I.P.S. thread size.
1" I.P.S. thread size.
1½" fine thread size.
2¹⁄₈" fine thread size.
S5002
S5003
S5007
S5020
–
–
SA5007
SA5020
S5007
2³⁄₈" fine thread size.
F1339, F1340
F1539
S3725, SA3725, S3625, SA3625
S2925, SA2925, S88, S2930,
S2955, SF2925, S2825
S3525, S3425
S5010
S5030
–
Dimensions in Inches (mm)
O-24
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Accessories
Protective Ring for 2¹⁄₈"
Threaded Covers
Problem Solvers and Replacement Components
Protective Ring for 2¹⁄₈ Inch Threaded Covers
Description
Catalog Number
Provides mechanical and wet mop protection for plugs and receptacles (brass).
S3061
S3061
Theater Seating Floor Box
Description
Catalog Number
The theater seating floor box is nonadjustable and provides a ¾ in. threaded hub for
conduit connection to theater aisle lights. It permits opening of the enclosure for
wiring without disturbing above floor connections. Other features include a cast iron
box with a corrosion-resistant finish and a blank steel cover. Knockouts: (¾ in. surface,
¾ in. sides, ¾ in. bottom) 18.80 cu. in. (380 cubic cm).
F3185
Theater Seating Floor Box
Adjustable Tops (Brass)
Brass Outlet Fittings for Conduit Systems
F3185
Future requirements for floor outlets may be accommodated by systematically studding the floor with
these fittings, all radiating from one or more floor boxes, from which any changes or additions may be
subsequently made by the pulling of wires from box to the outlet. Adjustment tops are male connections
to be mounted on elbow or tee fittings. They provide a pre-pour adjustment and an available connection
for above-floor service heads.
Description
B
Catalog Number
¾ in. threaded conduit size (male).
A
1.25" (31.8)
1.44" (36.6)
F1339
1 in. threaded conduit size (male).
1.31" (33.3)
1.75" (44.5)
F1539
Adjustable Tops (Brass)
Note: Adjustment: ¾ in. and 1 in. fittings permit ½ in. vertical adjustment.
F1339
F1539
B
Coupling (Brass)
Couplings are utilized for straight conduit connections when a floor box is not required. The conduit stub
is brought to within approximately 1¼ in. of the planned surface, and the coupling is mounted and adjusted
prior to the concrete pour. Standard service heads may be mounted to the couplings as required.
Description
¾ in. threaded conduit size (female).
A
1.44" (36.6)
B
Catalog Number
1.25" (31.8)
F1340
A
Adjustable Tops
Coupling (Brass)
F1340
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-25
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Hubbell Floor Box Cover to Receptacle
Complies with UL514A
Compatibility Chart
Cover Style
Round
Terazzo (2¹⁄₈")
S3325
2³⁄₈"
S3525
S3425
Rectangular
Rating
2P, 3W
15A, 125V
NEMA Config.
5-15R
2P,3W
15A, 125V
Duplex Flap
S(A)3925
Duplex Plug
S(A)3725
S(A)3825
S(A)3625
S(A)3826
5252AB
5262B
CR5252IG
HBL5252
HBL5262
IG5262
HBL4700
IG4700A
HBL4792
HBL4794
HBL4795
HBL5652
HBL5662
IG5662
HBL4550
IG4550A
HBL5302
5252AB
5262B
CR5252IG
HBL5252
HBL5262
IG5262
HBL4700
IG4700A
HBL4792
HBL4794
HBL4795
HBL5652
HBL5662
IG5662
HBL4550
IG4550A
HBL5302
HBL2152
IG2152
GF15LA
HBL5260SA
HBL5262SA
HBL5251
HBL5261
IG5261
HBL5251
HBL5261
IG5261
HBL5251
HBL5261
IG5261
L5-15R
HBL4710
IG4710
HBL4710
IG4710
HBL4710
IG4710
2P, 3W
15A, 250V
6-15R
HBL5661
IG5661
HBL5661
IG5661
HBL5661
IG5661
2P, 3W
15A, 250V
L6-15R
HBL4560
IG4560
HBL4560
IG4560
HBL4560
IG4560
2P, 3W
15A, 277V
7-15R
2P, 3W
15A, 277V
L7-15R
HBL4760
HBL4760
HBL4760
HBL4750
HBL4750
2P, 3W
20A, 125V
5-20R
HBL5361
IG5361
HBL5361
IG5361
HBL5361
IG5361
2P, 3W
20A, 125V
5-20R
5352AB
5362B
CR5352IG
HBL5352
HBL5362
IG5362
HBL5392
5352AB
5362B
CR5352IG
HBL5352
HBL5362
IG5362
HBL5392
2P, 3W
20A, 125V
L5-20R
2P, 3W
20A, 250V
6-20R
2P, 3W
30A, 125V
L5-30R
2P, 3W
30A, 250V
L6-30R
3P, 4W, 20A
125/250V
14-20R
HBL2310
IG2310
HBL5461
IG5461
HBL2320
IG2320
HBL2610
IG2610
HBL2620
IG2620
HBL8410
HBL5462
IG5462
L6-20R
HBL2310
IG2310
HBL5461
IG5461
HBL2320
IG2320
HBL2610
IG2610
HBL2620
IG2620
HBL8410
HBL5462
IG5462
2P, 3W
20A, 250V
HBL2310
IG2310
HBL5461
IG5461
HBL2320
IG2320
HBL2610
IG2610
HBL2620
IG2620
HBL8410
HBL2410
IG2410
HBL8420
HBL2410
IG2410
HBL8420
HBL2410
IG2410
HBL8420
HBL2420
IG2420
HBL2710
IG2710
HBL2720
IG2720
HBL2740
HBL2420
IG2420
HBL2710
IG2710
HBL2720
IG2720
HBL2740
HBL2420
IG2420
HBL2710
IG2710
HBL2720
IG2720
HBL2740
HBL2510
IG2510
HBL2530
HBL2510
IG2510
HBL2530
HBL2510
IG2510
HBL2530
HBL2810
IG2810
HBL2830
HBL2810
IG2810
HBL2830
HBL2810
IG2810
HBL2830
L14-20R
3P, 4W, 20A
3Ø 250V
15-20R
L15-20R
3P, 4W, 30A
125/250V
L14-30R
3P, 4W, 30A
3Ø 250V
L15-30R
3P, 4W, 30A
3Ø 600V
L17-30R
4P, 5W, 20A
3ØY 120/208V
L21-20R
4P, 5W, 20A
3ØY 347/600V
L23-20R
4P, 5W, 30A
3ØY 120/208V
L21-30R
4P, 5W, 30A
3ØY 347/600V
L23-30R
O-26
Style Line®
2¹⁄₈"
S(A)2925
S(A)2725
S(A)2525
S2825
S(A)2625
S(A)2425
HBL2162
IG2162
GF20LA
HBL5360SA
HBL5362SA
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
CONNEXION Modular Wiring Zone System
System Planning
The Hubbell CONNEXION Zone Distribution System is a factory assembled, flexible, modular system that delivers power
and data in raised floor installations. This unique system increases the value of the infrastructure and meets the challenges
posed by new construction and renovation in commercial offices, retail outlets and educational facilities. By improving cable
management, enhancing flexibility, and reducing administration expense, the CONNEXION Zone Distribution System allows
for power and communications to be located where needed for efficient relocations and upgrades.
Extender
cables
www.hubbell-wiring.com
Splitter
Zone
Distribution
Box
O-27
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
CONNEXION – Wiring Schematics
BLACK >
L1
RED >
L2
BLUE >
L3
PINK >
L4
GREEN OR BARE >
G
GREEN / YELLOW >
IG
WHITE / BLACK >
N1
L1
L2
L3
L4
G
G
N1
N1
"A"
"B"
IG
IG
The CONNEXION System is offered in three common 20A perWHITE
circuit
wiring configurations to support the unique
/ RED >
N2
N2
N2
requirements of a building infrastructure. The basic system design to deliver all eight wires throughout the Network,
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
consisting of hots, neutrals, grounds, and isolated grounds.
"C"
"D"
4/2/2 System Configuration (4-Hots, 2-Neutrals, 2-Grounds)
3 + 1 Wiring Configuration
Appropriate in areas where moderate amounts
of sensitive equipment are used, and where
separation from other circuits and isolated
grounding are required.
• Three circuits share #10 AWG neutral to manage
harmonics for general purpose.
• One circuit on dedicated #10 AWG neutral for
sensitive equipment.
• Isolated ground capability for sensitive equipment.
• Component Rating: 20 amperes at 120/208 or
120/240 volt.
• 8-Wires (4 hots, 2 neutrals, 2 grounds).
BLACK >
L1
RED >
L2
BLUE >
L3
PINK >
L4
GREEN OR BARE >
BLACK >
GREEN / YELLOW >
RED >
WHITE / BLACK >
BLUE >
WHITE / RED >
GREEN OR BARE >
G
L1
IG
L2
N1
L3
N2
G
GREEN / YELLOW >
IG
WHITE / BLACK >
N1
WHITE / RED >
N2
WHITE / BLUE >
N3
L1
L2
L3
L4
G
L1
G
N1
L2
N1
G
G
CIRCUIT
"A"
N1
CIRCUIT
"B"
G
IG
N1
L3
N2
IG
CIRCUIT
"C"
CIRCUIT
"D"
N2
N3
CIRCUIT
"A"
CIRCUIT
"B"
CIRCUIT
"C"
4/2/2 System Configuration (4-Hots, 2-Neutrals, 2-Grounds)
2 + 2 Wiring Configuration
Appropriate in areas where a high concentration of
sensitive equipment (computers, printers) is needed and
minimal amounts of conventional equipment exist.
• Two circuits share one #10 AWG neutral to
manage harmonics for general purpose.
• Two additional circuits share one #10 AWG
neutral to manage harmonics for general purpose.
• Isolated ground capability for sensitive equipment.
• Component Rating: 20 amperes at 120/208 or
120/240 volt.
• 8-Wires (4 hots, 2 neutrals, 2 grounds).
BLACK >
L1
RED >
L2
BLUE >
L3
PINK >
L4
GREEN OR BARE >
GREEN / YELLOW >
IG
WHITE / BLACK >
N1
WHITE / RED >
N2
3/3/2 System Configuration (3-Hots, 3-Neutrals, 2-Grounds)
• Three circuit capacity.
• Isolated ground capability for sensitive equipment.
• Each circuit has its own#12 AWG neutral to
manage harmonics.
• Component Rating: 20 amperes at 120/208 or
120/240 volt.
• 8-Wires (3 hots, 3 neutrals, 2 grounds).
L2
L3
L4
G
G
N1
N1
CIRCUIT
"A"
BLACK >
2 + 1 Wiring Configuration
Appropriate where either a 120/240 volt or 120/208 volt
3ØY power distribution system exists and separate neutral
conductors are desired.
G
L1
L1
RED >
L2
BLUE >
L3
PINK >
L4
GREEN OR BARE >
BLACK >
GREEN / YELLOW >
RED >
WHITE / BLACK >
BLUE >
WHITE / RED >
GREEN OR BARE >
G
L1
IG
L2
N1
L3
N2
G
GREEN / YELLOW >
IG
WHITE / BLACK >
N1
WHITE / RED >
N2
WHITE / BLUE >
N3
CIRCUIT
"B"
IG
IG
N2
N2
CIRCUIT
"C"
CIRCUIT
"D"
L1
L2
L3
L4
G
L1
G
G
IG
N1
L2
N1
G
G
CIRCUIT
"A"
N1
CIRCUIT
"B"
N1
L3
CIRCUIT
IG
"C"
N2
CIRCUIT
"D"
N2
N3
CIRCUIT
"A"
CIRCUIT
"B"
CIRCUIT
"C"
Note: Contact factory for custom wiring configurations.
O-28
BLACK >
L1
RED >
L2
BLUE >
L3
L1
www.hubbell-wiring.com
L2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
L3
Floor Boxes
System Components
Expandable Zone
Distribution Boxes
Catalog Number
Splitter Modules
Catalog Number
4/2/2 System (2+2)
PDCS42222
4/2/2 System
SPLITTER422
4/2/2 System (3+1)
PDCS42231
3/3/2 System
SPLITTER332
3/3/2 System
PDCS332
Extender Cable
Female To Female
Catalog Number
Furniture Feed
Catalog Number
4/2/2 System
EXT422xxFF8W*
4/2/2 System
FIJB422
3/3/2 System
EXT332xxFF8W*
3/2/2 System
FIJB332
Note: *Replace xx with “05” for 5 ft., “10” for 10
ft., “15” for 15 ft., “20” for 20 ft., “25” for 25
ft. and “30” for 30 ft. Custom lengths are
available upon request.
Cable Whip
Male To Open
Catalog Number
Cable Whip
Female To Open
Catalog Number
4/2/2 System, 15 in.
EXT42201MO8W
4/2/2 System, 15 in.
EXT42201FO8W
3/3/2 System, 15 in.
EXT33201MO8W
3/3/2 System, 15 in.
EXT33201FO8W
4/2/2 System, 5 ft.
EXT42205MO8W
4/2/2 System, 5 ft.
EXT42205FO8W
3/3/2 System, 5 ft.
EXT33205MO8W
3/3/2 System, 5 ft.
EXT33205FO8W
4/2/2 System, 15 ft.
EXT42215MO8W
4/2/2 System, 15 ft.
EXT42215FO8W
3/3/2 System, 15 ft.
EXT33215MO8W
3/3/2 System, 15 ft.
EXT33215FO8W
Pre-Wired Raised Access Floor Box Configuration
Step 1 – Select a Raised Floor Box Series
Box Series
Description
Dimensions (Including Cover)
Conduit Knockouts
AFB101
4-Gang Deep with Non-Metallic Cover
8.94"L x 6.94"W x 5.18"H
½", ¾", 1"
AFB301
4-Gang Deep with Metal Cover
10.00"L x 10.00"W x 4.30"H
½", ¾", 1", 1¼"
AFB401
4-Gang Shallow with Metal Cover
10.00"L x 10.00"W x 2.81"H
½", ¾", 1"
AFB501
8-Gang Deep with Metal Cover
10.00"L x 10.00"W x 5.31"H
½", ¾", 1", 1¼"
AFB801
4-Gang Deep, Round with Metal Cover
8.37" Diameter x 5.68"H
½", ¾", 1"
Step 2 – Use Device Selection Chart to Configure Gangs
Step 2A
If customer needs the 4-gang deep box:
(Configured Catalog Number)
AFB301
Step 2B
Choose 4/2/2 or 3/3/2 System {4 = 4/2/2, 3 = 3/3/2}
AFB3014
Step 2C
Gang 1 - Configure using selection chart
AFB3014A
Step 2D
Gang 2 - Configure using selection chart
AFB3014AE
Step 2E
Gang 3 - Configure using selection chart
AFB3014AEH
Step 2F
Gang 4 - Configure using selection chart
AFB3014AEHZ
Device Selection Chart
Catalog Letter
Description
A
Line 1, 20A Duplex (5352G)
B
Line 1, 20A, IG Duplex (CR5352IG)
E
Line 2, 20A Duplex (5352G)
F
Line 2, 20A, IG Duplex (CR5352IG)
I
Line 3, 20A Duplex (5352G)
H
Line 3, 20A, IG Duplex (CR5352IG)
O
Line 4, 20A Duplex (5352G)
P
Line 4, 20A, IG Duplex (CR5352IG)
Z
Unpopulated gang, empty for install of tel/data.
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-29
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Unloaded Raised Access Floor Boxes and Face Plates
Dimensions Inches (mm)
Style
Metallic Cover
4-Gang Shallow
4-Gang Deep
8-Gang Deep
Non-Metallic Cover
Metallic Cover
4-Gang Deep
3-Gang Power and
1-Gang Low Voltage
A
C
B
Cover Color
Black
Gray
Max. Floor Thickness
AFB301BK
AFB301GNT
2.75" (69.9)
AFB401BK
AFB401GNT
1.88" (47.8)
AFB501BK
AFB501GNT
3.75" (95.3)
Cubic Inch (cm3)
Capacity Per Gang
31.3 cu. in.
(513 cm3)
25.3 cu. in.
(414 cm3)
55.6 cu. in.
(911 cm3)
Dimensions – A
4.00" (101.6)
10.00" (254.0)
10.00" (254.0)
12.00" x 12.00"
(1) ½", (2) ½" & ¾",
(4) 1¼" trade size
(4) ¾" & 1"
trade size
2.62" (66.5)
10.00" (254.0)
10.00" (254.0)
12.00" x 12.00"
(1) ½", (6) ½" & ¾"
trade size
(4) ¾" & 1"
trade size
5.12" (130.0)
10.00" (254.0)
10.00" (254.0)
12.00" x 12.00"
(1) ½", (2) ½" & ¾",
(4) 1¼" trade size
(4) ¾" & 1"
trade size
Dimensions – B
Dimensions – C
Cover Flange Dim.
Knockouts – Sides
Knockouts – Bottom
Cover & Flange Included

(Carpet or tile application)
Floor Tile Cut-Out
10.38" x 10.38"


10.38" x 10.38"
AFB801BK†
AFB801GNT†
2.62" (66.5)
(2) 17.1 cu. in.
(280 cm3)
(1) 15.9 cu. in.
(260 cm3)
6.12" (155.4)
–
–
10.0" Diameter
(1) ½", (2) ¾" &
1" trade size
(3) ½" & ¾"
trade size
HBLAFB101BK*
HBLAFB101GNT*
2.00" (50.8)
(2) 22.5 cu. in.
(368.7 cm3)
(2) 20.5 cu. in.
(335.9 cm3)
5.18" (131.6)
9.00" (228.6)
7.00" (177.8)
10.62" x 8.62"
(4) ½" & (4) ¾",
(4) ¾" & 1" trade size
(4) ¾" & 1"
trade size

10.38" x 10.38"

9.00" x 7.00"
8.375" Diameter
Replacement Metallic Cover and Flange
Description
Cover and Flange
Cover and Flange
Dimensions
Color
Catalog Number
12"W x 12"L
12"W x 12"L
Gray
Black
HBLTCGNT
HBLTCGNTBK
Replacement Non-Metallic Cover and Flange
HBLTCGNT
HBLAFB101TCBK*
Description
Dimensions
Color
Catalog Number
Cover and Flange
Cover and Flange
7"W x 9"L
7"W x 9"L
Gray
Black
HBLAFB101TCGNT*
HBLAFB101TCBK*
Note: UL File Number E31999. CSA File Number LR702145.
For City of Chicago approved versions, use following part numbers: HBLAFB301BASEC, HBLAFB401BASEC and HBLAFB501BASEC.
Cover must be ordered separately (i.e., HBLTCGNT and HBLTCGNTBK). These versions do not include knockouts and meet
construction requirements for CCEA-2000. AFB covers are reversible for both carpet recess and flush tile applications.
*Insert for flush tile applications included. Remove insert for carpet recess.
†One faceplate required for data gang only. Cut-out for duplex receptacles included with AFB801.
Hubbell – Screw Type Face Plates**
2.00"
HBLST302SGY
HBLDE301SGY
HBLTO310SGY
HBLTL318SGY
HBLTL319SGY
HBLBL300SGY
HBLIMFSGY
HBL317SGY
Duplex
Style Line®
Decorator
Toggle
Single Receptacle
(1.56" Boss Dia.)
Single Receptacle
(1.39" Boss Dia.)
Blank
3-Unit Hubbell iSTATION
Hubbell
6-Port
4.50"
Typical
Open Systems – Screw Type Face Plates**
HBLAM303SGY HBLAMP313SGY HBLKR314SGY HBLLT309SGY
AMP-ACO
AMP 6-Port
Krone®/Leviton®
SYSTIMAX®
HBLPA308SGY
HBLNO309SGY
Panduit
Mini-Com®
NORDX® 6-Port
(Cat. 5e jacks only)
(See Network Wiring section
for module options)
HBLSI305SGY HBLSI315SGY
Siemon
CT® Series
Siemon
MAX® Series
HBLOR306SGY HBLORT322SGY
Ortronics
Series II®
Ortronics
TracJack®
Note: **Catalog numbers indicated are gray, replace “GY” with the following to designate color: “BK” for Black, “I” for Ivory and “WA” for White.
AMP is a registered trademark of Tyco Electronics Corp. Krone® is a registered trademark of Krone, Inc. Leviton® is a registered trademark of Leviton. SYSTIMAX® is a
registered trademark of CommScope, Inc. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. NORDX® is a registered trademark of Belden/CDT, Inc.
MAX® and CT® Series are registered trademarks of The Siemon Company. TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
Dimensions in Inches (mm)
O-30
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Custom Pre-Wired Access Floor Boxes
Hinged cable egress port
Wire leads for
field termination
Pre-wired cable whip
Pre-wired devices
Access floor box
Oversized opening provided
with grommet for low-voltage
Features and Benefits
• Reduce job site fabrication time and installation labor.
• Reduce job site waste.
• Access Floor Box (AFBPW) pre-wired to your specifications.
– Choose from Hubbell quality devices.
– Single or multiple circuit wiring configurations.
– Various cable lengths.
• AFB installs easily; no disassembly of the box and cover required.
• Pigtail terminates beneath raised floor.
• Box covers available in black or granite powder coat finish.
• Contact Hubbell Wiring Systems for ordering information.
• UL Listed Wiring Assembly, file number E305156.
Pre-Wired Raised Access Floor Box Options
Box Series
Description
Dimensions (Including Cover)
Conduit Knockouts
AFBPW101
4-Gang Deep with Non-Metallic Cover
8.94"L x 6.94"W x 5.18"H
½", ¾", 1"
AFBPW301
4-Gang Deep with Metal Cover
10.00"L x 10.00"W x 4.30"H
½", ¾", 1", 1¼"
AFBPW401
4-Gang Shallow with Metal Cover
10.00"L x 10.00"W x 2.81"H
½", ¾", 1"
AFBPW501
8-Gang Deep with Metal Cover
10.00"L x 10.00"W x 5.31"H
½", ¾", 1", 1¼"
AFBPW801
4-Gang Deep with Round Metal Cover
8.37" Diameter x 5.68"H
½", ¾", 1"
www.hubbell-wiring.com
O-31
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Convention Center Utility Box
Metallic Series
Painted Galvanized Steel Box (14 Gauge G90)
Stainless Steel Box (14 Gauge 304)
Cost effective, corrosion resistant paint. Suitable for
both on and above-grade applications.
Corrosion resistant enclosure suitable for both on
and above-grade applications.
Separate enclosure to keep water
away from electrical components
Hooks for tying
onto rebar
2-gang low voltage
compartment
4-inch pre-pour adjustability
HBLSCCUBPDW
HBLSCCUBPDWSS
Features
Benefits
UL Listed and CSA Certified
Third party approved and certified.
Heavy Duty Covers
32,000 lb. load capacity with 2x safety factor.
Scrub Water
Meets UL514 requirements for scrub water and prevents water, dirt and debris from entering
the electrical devices.
Custom Built Panels
Accepts a wide variety of electrical configurations including 100A pin and sleeve,
30A Twist-Lock®, straight blade devices and circuit breakers available.
Separate Enclosure for Compressed
Air and Water Utilities
Prevents air and water utilities from coming in contact with electrical services.
Metallic Convention Center Utility Boxes*
Painted Galvanized Steel Box Description
Catalog Number
Steel Convention Center Utility Box with Cover for Power and Data/Communications.
HBLSCCUBPD
Steel Convention Center Utility Box with Cover for Power, Data/Communications and Air/Water Box.
HBLSCCUBPDW
Steel Convention Center Utility Box with Cover for Air/Water Only.
HBLSCCUBW
Stainless Steel Box Description
Steel Convention Center Utility Box with Cover for Power and Data/Communications in Stainless Steel.
HBLSCCUBPDSS
Steel Convention Center Utility Box with Cover for Power, Data/Communications and Air/Water Box in Stainless Steel.
HBLSCCUBPDWSS
Steel Convention Center Utility Box with Cover for Air/Water Only in Stainless Steel.
HBLSCCUBWSS
Note: *All boxes provided with temporary galvanized steel concrete covers.
Power and Data Panels**
Custom manufactured and pre-wired to your project specifications. Panel options include 60A pin and sleeve, 20A and 30A
Twist-Lock®, 20A GFCI, isolated ground or industrial straight blade devices. Optional circuit breaker protection is available.
Up to two-gangs available for audio/video/data communication requirements. Both power and data panels are shipped
separately after the boxes have been set in concrete.
Note: **Contact Hubbell for available configurations of power and data panels.
HBLSCCUBPD
HBLSCCUBW
HBLSCCUBPD
HBLSCCUBPDSS
Up to 2-gangs
of data
20A and
30A devices
Circuit breakers
2 in. drain
Up to 60A
Pin and Sleeve
Stand Alone Power/Data Box
O-32
Inside View
Inside View
Inside View
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Convention Center Utility Box
Dimensional Information
Painted Galvanized or Stainless Steel Metallic Box
Stand Alone Power/Data
HBLSCCUBPD (Painted Galvanized)
HBLSCCUBPDSS (Stainless Steel)
2X
3.38"
(85.9)
2X
3.67"
(93.2)
23.51"
(597.2)
25.96"
(659.4)
13.46"
(341.9)
27.50"
(698.50)
6.00"
(152.4)
24.26"
(616.2)
8.90"
(226.1)
6.44"
(163.6)
24.27"
(616.5)
0-4"
(0-101.6)
Adjustment
13.47"
(342.1)
9.65"
(245.11)
Combination Power/Data/Water
HBLSCCUBPDW (Painted Galvanized)
HBLSCCUBPDWSS (Stainless Steel)
2X
13.47"
(342.1)
4X
3.38"
(85.9)
21.97"
(558.0)
Stand Alone Water/Air Box
HBLSCCUBW (Painted Galvanized)
HBLSCCUBWSS (Stainless Steel)
29.48"
(748.8)
13.46"
(341.9)
25.96"
(659.4)
4X
3.67"
(93.2)
9.65"
(245.1)
23.51"
(597.2)
27.50"
(698.5)
24.27"
(616.5)
0-4"
(0-101.6)
Adjustment
0-4"
(0-101.6)
Adjustment
25.60"
(650.2)
Pre-Wired Power Panels
Convention Center Power Panels are custom built to order and pre-wired in the factory to make installation quick
and easy. Please contact the factory to configure a power panel for your specific needs.
Position
Device Options
8
Qty. (1) Pin and Sleeve Receptacle 60A.
9 & 10
Qty. (2) Twist-Lock® Receptacles (20A or 30A).
11,12,13
Qty. (3) Duplex Receptacles (20A Standard,
GFCI or Isolated Ground).
14
Load Center for Circuit Breakers, 8-Pole
Positions Max.
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-33
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Furniture and Work Surface Connectivity Boxes
Applications
This family of furniture and work surface connectivity boxes installs into conference tables and workstations to bring power,
voice, data, and multimedia directly to the point of use. In addition, they offer an aesthetic design with improved cable
management. Now, users can plug in laptops, projectors and other equipment at the desktop level - no more crawling
under the table or moving obstacles to get to the electrical outlet and network connectivity.
Furniture and Work Surface Connectivity Boxes
Flush Mount Boxes
Hubbell offers square and rectangular
flush mount boxes in a variety of
configurations. These boxes are available
in stainless steel, anodized aluminum
or painted finishes to match any décor.
Boxes are designed for easy installation
and are available pre-wired or empty for
field wiring.
Lift-up Style Boxes
Offering a convenient and attractive
method for work surface power and data
connections, these boxes are available
in several finishes. When not in use,
services are concealed by flipping
the unit down.
Table Mount Boxes
The table mount series can be mounted
on any work surface to provide power
and data activation. Choose from a
variety of mounting brackets that allow
temporary or permanent mounting.
Units are pre-wired for easy installation.
Pre-Wired Boxes
Configured with 15A power outlet,
15-pin feed through and 3.5mm
audio jack. This unit allows for further
customization by populating two
keystone openings.
Low Voltage Boxes
Low voltage only units are available
pre-loaded with XLR microphone jack
or with keystone opening for Hubbell
snap-fit modules.
Table Top Boxes
Pre-Wired Boxes
Round dual-service boxes easily install
into a 3½-inch diameter core hole.
Power is pre-wired and keystone
openings accommodate data or
multi-media activation.
O-34
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Furniture and Work Surface Connectivity Boxes
Square Flush Mount Boxes
Description
Finish
Dimensions
Catalog Number
2-Gang Square Flush Mount Box with Cover.
Black
6.5"L x 6.5"W x 3.75"H
HBLSHA2
2-Gang Square Flush Mount Box with Cover.
Stainless Steel
6.5"L x 6.5"W x 3.75"H
HBLSHA2BSS
Description
Finish
Dimensions
Catalog Number
2-Gang Rectangular Flush Mount with Cover.
Black
10.75"L x 4.06"W x 3.5"H
HBLPHA2
2-Gang Rectangular Flush Mount with Cover.
Stainless Steel
10.75"L x 4.06"W x 3.5"H
HBLPHA2BSS
4-Gang Rectangular Flush Mount with Cover.
Black
10.75"L x 6.5"W x 3.5"H
HBLPHA4
4-Gang Rectangular Flush Mount with Cover.
Stainless Steel
10.75"L x 6.5"W x 3.5"H
HBLPHA4BSS
Description
Finish
Dimensions
Catalog Number
2-Gang Surface Mount Box.
Black
4.19"L x 4.81"W x 2.44"H
HBLCON2
3-Gang Surface Mount Box.
Black
6.19"L x 4.81"W x 2.44"H
HBLCON3
Description
Finish
Dimensions
Catalog Number
2-Gang Recessed Mount.
Black
10.25"L x 7.0"W x 5.88"H
HBLMIR2
4-Gang Recessed Mount.
Black
31.0"L x 10.25"W x 5.88"H
HBLMIR4
Description
Finish
Dimensions
Catalog Number
2-Gang Under Desk Mount.
Black
9.19"L x 3.0"W x 2.88"H
HBLMAR2
3-Gang Under Desk Mount.
Black
13.69"L x 3.0"W x 2.88"H
HBLMAR3
Rectangular Flush Mount Boxes
Surface Mount Boxes
HBLSHA2
HBLPHA2
Recessed Mount Boxes
HBLCON2
Under Desk Mount Boxes
Hubbell – Screw Type Face Plates
2.00"
HBLST302SBK
HBLDE301SBK
HBLBL300SBK
HBLIMFSBK
HBL317SBK
Duplex
Style Line®
Decorator Opening
Blank
3-Unit Hubbell iSTATION
Hubbell
(See Network Wiring section
for module options)
6-Port
HBLMIR2
4.50"
Typical
HBLMAR2
Note: See page O-30 for open systems screw type face plates.
Table Top Boxes
Low Voltage Only
Description
Finish
Dimensions
Catalog Number
Table Top box; 2 inch diameter hole;
(1) keystone opening; Keystone modules
sold separately.
Black Anod. Alum.
Clear Anod. Alum.
Solid Brass
2.19" Diameter
TTBKSBK
TTBKSAL
TTBKSBR
Table Top box; 2 inch diameter hole;
(1) XLR microphone jack installed.
Black Anod. Alum.
Clear Anod. Alum.
Solid Brass
2.19" Diameter
TTBXLRBK
TTBXLRAL
TTBXLRBR
Finish
Dimensions
Catalog Number
Table Top box; 3.5 inch diameter hole; (1)
Black Anod. Alum.
pre-wired 15A outlet with 9 foot power supply Clear Anod. Alum.
cord; (1) 3.5mm screw terminal audio jack;
Solid Brass
(1) 15-pin gender changer F/F; (2) keystone
openings; Keystone modules sold separately.
3.88" Diameter
TTBDS1BK
TTBDS1AL
TTBDS1BR
Table Top box; 3.5 inch diameter hole;
(2) pre-wired 15A outlets with 9 foot power
supply cord; (2) keystone openings;
Keystone modules sold separately.
3.88" Diameter
TTBKSBK
TTBXLRBK
Pre-Wired Dual-Service
Description
Black Anod. Alum.
Clear Anod. Alum.
Solid Brass
Note: See section A for power devices and section W for datacom accessories.
www.hubbell-wiring.com
TTBDS1BK
TTBDS2BK
TTBDS2AL
TTBDS2BR
TTBDS2BK
Dimensions in Inches (mm)
O-35
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Furniture and Work Surface Connectivity Boxes
Pre-Wired Work Surface Series
Square Lift-Up Style
WSBC21UBK
WSBA11BK
Description
Finish
Dimensions
Catalog Number
Two (2) pre-wired 15A outlets with 6-ft.
power supply cord; 1-Unit opening for
Hubbell iSTATION modules. Unit rotates
up when in use and down to conceal
services when not in use.
Black
Silver
5.75"L x 5.39"W x 4.25"H
WSBC21UBK
WSBC21USV
Description
Finish
Dimensions
Catalog Number
One (1) pre-wired 15A outlet with 9-ft.
power supply cord; One (1) RJ-45 jack
installed with 6-ft. patch cord.
Black
Brushed Stainless
Steel
3.7"L x 3.7"W x 2.93"H
WSBA11BK
WSBA11BSS
Two (2) pre-wired 15A outlets with 9-ft.
power supply cord (power only).
Black
Brushed Stainless
Steel
3.7"L x 3.7"W x 2.93"H
WSBA2BK
WSBA2BSS
Description
Finish
Dimensions
Catalog Number
Two (2) pre-wired 15A outlets with 9-ft.
power supply cord; One (1) Low Voltage
Plate included with 1-Unit opening for
Hubbell iSTATION modules.
Black
6.50"L x 1.75"W x 2.25"H
WSBD21UBK
Description
Finish
Dimensions
Catalog Number
One (1) pre-wired 15A outlet with 9-ft.
power supply cord; One (1) Hubbell
Keystone opening.
Black
Silver
3.57"L x 2.19"W x 2.50"H
WSBE11BK
WSBE11SV
Two (2) pre-wired 15A outlets with 9-ft.
power supply cord; Two (2) Hubbell
Keystone openings.
Black
Silver
6.32"L x 2.19"W x 2.50"H
WSBE22BK
WSBE22SV
Three (3) pre-wired 15A outlets with 9-ft.
power supply cord; One (1) Low Voltage
Plate included with 1-Unit opening for
Hubbell iSTATION modules.
Black
Silver
8.25"L x 2.19"W x 2.50"H
WSBE31UBK
WSBE31USV
Mounting bracket with thumb screw
(optional).
n/a
n/a
WSBECLAMP
Description
Finish
Dimensions
Catalog Number
Two (2) pre-wired 15A outlets with 6-ft.
power supply cord; One (1) Low Voltage
Plate included with 1-Unit opening for
Hubbell iSTATION modules; Two (2)
additional 1-Unit openings provided
in base of unit.
Black
8.98"L x 5.47"W x 2.97"H
Brushed Anod. Alum.
Brushed Stainless
Steel
WSBB23UBK
WSBB23UBAL
WSBB23UBSS
Four (4) pre-wired 15A outlets with 6-ft.
power supply cord; Two (2) 1-Unit
opening for Hubbell iSTATION modules
provided in base of unit.
Black
8.98"L x 5.47"W x 2.97"H
Brushed Anod. Alum.
Brushed Stainless
Steel
WSBB43UBK
WSBB43UBAL
WSBB43UBSS
Empty Enclosure with one (1) duplex
opening, One (1) Low Voltage Plate
included with 1-Unit opening for Hubbell
iSTATION modules; Two (2) additional
1-Unit openings provided in base of unit;
intended for field wiring.
Black
WSBBHWBK
Square Mini Lift-Up Style
Under Table Mount
Work Surface Mount
WSBD21UBK
WSBE22SV
Recessed Concealed Services
WSBB23UBK
O-36
8.98"L x 5.47"W x 2.97"H
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Furniture and Work Surface Connectivity Boxes
Pre-Wired Work Surface Elite Series
Grommet Style
Description
Finish
Dimensions
Two (2) pre-wired 15A outlets with 6-ft.
power supply cord; Two (2) Hubbell
Keystone openings.
Black
Silver
8.62"L x 3.0"W x 2.25"H
Catalog Number
Flush Grommet Cover with
dust shield.
Black
5.68"L x 3.39"W x 0.96"H
Silver
Brushed Aluminum
Brushed Stainless
Steel
WSBF22BK
WSBF22SV
WSBFGROMBK
WSBFGROMSV
WSBFGROMBAL
WSBFGROMBSS
WSBF22BK
WSBFGROMSV
WSBFGROMBK
WSBFGROMSV
WSBFGROMBAL
WSBFGROMBSS
Pre-Wired Work Surface Elite Series
Recessed Concealed Services
Description
Finish
Four (4) pre-wired 15A outlets with 6-ft.
power supply cord; Three (3) Low Voltage
Plates included with 1-Unit opening for
Hubbell iSTATION modules.
Black
Silver
Clear Anodized
Black Anodized
Dimensions
15.0"L x 9.0"W x 6.25"H
Catalog Number
WSBG43UBK
WSBG43USV
WSBG43UBAL
WSBG43UBBA
WSBG43USV
(cover doors shown open)
Pop-Up Style*
Description
Base Unit with Four (4) pre-wired 15A
outlets with 6-ft. power supply cord; Two
(2) Low Voltage plates included with 1-Unit
opening for Hubbell iSTATION modules.
Finish
—
Dimensions
Catalog Number
8.90"L x 8.90"W x 13.9"H WSBH42U*
Trim Ring and Decorative Round Top.
Black
5.25" Diameter
WSBHTRBK
Trim Ring and Decorative Round Top.
Brushed Stainless
Steel
5.25" Diameter
WSBHTRBSS
Note: *WSBH42U is CSA Certified only.
WSBH42U with
WSBHTRBK
Replacement Low Voltage Data Plates
Description
Finish
Dimensions
Catalog Number
Non-metallic low voltage plate, blank.
Black
3.18"L x 1.88"W
WSBPLATE1
Non-metallic low voltage plate,
1-Unit Hubbell iSTATION cut-out.
Black
3.18"L x 1.88"W
WSBPLATE2
WSBPLATE1
WSBPLATE2
www.hubbell-wiring.com
O-37
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed Wall Boxes
AV In-Wall and Ceiling Enclosures
AV In-Wall Enclosure
Hubbell’s netSELECT® Flat Panel Television (FPTV) connection
enclosure delivers high-density connectivity and power in the
wall. This allows flat panel displays and interactive “smart”
boards to sit flush against walls with no dangling cords.
It quickly installs to studs or sheetrock without additional
components or hardware.
• Optional screw on cover
reduces tampering
• cULus 1863 Listed
Multiple Device
Mounting Options
1½" and
1¼" Conduit
Knockouts
Accepts Standard
Electrical Boxes
Easily Mounts to
Studs or Sheetrock
Sheet Metal Base
White Powder
Coat Finish
Integrated Cable
Management
Trim Ring Covers
Rough-In
NSAV62M
FPTV Connection Enclosure
NSAV6C
Description
Color
Catalog Number
2-Gang In-Wall Enclosure
Steel Cover for NSAV6 series
White
White
NSAV62M
NSAV6C
Description
Color
Catalog Number
Standard Power Kit
Surge Protected Power Kit
White
Blue
NSOKPTR
NSOKPS
Description
Color
Catalog Number
1-Gang Blank Plate
1-Gang Decorator Plate
1-Gang iSTATION Plate
1-Gang 4-Port Keystone Plate
1-Port HDMI Frame
2-Port HDMI Frame
HDMI Snap Fit
F-Connector Snap Fit
USB A-to-B Snap Fit
Cat 6 Snap Fit Jack
White
White
White
White
White
White
White
White
White
White
NP14W
NP26W
IMF1W
NSP14W
NS801W
NS802W
SFHC14W
NSF70W
SFUSBABW
NSJ6W
Power Kits (For use with NSAV62M only)
AV Connectors and Plates
NSOKPS
NS801W
NSJ6W
SFHC14W
Note: See Network Wiring section for other connector options.
AV Ceiling Enclosure
The AV Ceiling Enclosure is designed to work with active AV devices
to integrate AV distribution, data connections and power in one
location, providing a direct connection to a projector or a display
device. An additional AV/data kit can be added or customized to
address all connector, mounting and patching needs, reducing
multiple pieces on site.
• Manage multiple applications inside one enclosure
• Flush mounted, white enclosure for consistent look
when mounted in the ceiling
• Loaded with two Hubbell 20A duplex receptacles
and a 2-gang back box
• All steel rugged construction provides the ultimate
strength for installation
AVCE1H
AV Ceiling Enclosure
O-38
Description
Enclosure Dimensions
Color
Plenum
Non-Plenum
AV Ceiling Enclosure
24" (610) x 12" (305) x 8" (203)
White
AVCE1P
AVCE1H
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed Wall Boxes
Large Capacity Wall Boxes
Large Capacity 113.3 Cubic Inch Wall Box
Description
Dimensions
Square 2- or 3-gang 4¹¹/₁₆”H x 7¾”W x 3¼”D
wall box
Knockouts Sides
Knockouts Back
Catalog Number
(4) ½” – ¾” TKO,
(4) ¾” – 1” TKO,
(1) 1” – 1¼” TKO,
(2) ¾” – 2” conc. KO
(2) ½” – ¾” TKO;
(2) ¾” – 1” TKO,
(2) 1” – 1¼” TKO
HBL263
HBL263
3-Gang Cover/Mud Rings
Description
Compatible with
½” height
HBL263
Capacity (cu. in.)
Catalog Number
10.3
HBL792
¾” height
12.7
HBL793
1¼” height
24.2
HBL794
HBL792
HBL793
Low Voltage Partition
Description
Compatible with
Compatible
Mud Ring Depth
Packing Quantity
Catalog Number
Low voltage
partition
HBL260 and HBL263
½”, ¾” and 1¼”
1
HBL981
HBL794
HBL981
Large Capacity 66.7 Cubic Inch Wall Box
Description
Dimensions
Knockouts Sides
Knockouts Back
Catalog Number
Square 2-gang
wall box
4¹¹/₁₆”H x 4¹¹/₁₆”W x 3¼”D
(2) ¾” – 1” TKO;
(2) 1” – 1¼” TKO;
(2) ¾” – 2” conc. KO
(2) ¾” – 1” TKO
HBL260
HBL260
Low Voltage Partition
Description
Compatible with
Compatible
Mud Ring Depth
Packing Quantity
Catalog Number
Low voltage
partition
HBL260 and HBL263
½”, ¾” and 1¼”
1
HBL981
HBL981
www.hubbell-wiring.com
O-39
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Floor Boxes
Recessed Wall Boxes
Multi-Connect Boxes and Face Plates
Multi-Service Recessed Wall Boxes for Drywall Applications
1-Gang
2-Gang
Description
Catalog Number
Multi-service recessed wall box, 1-gang, for drywall applications.
HBLWSCS1
Multi-service recessed wall box, 2-gang, for drywall applications.
HBLWSCS2A
Multi-service recessed wall box, 3-gang, for drywall applications.
HBLWSCS3A
Multi-service recessed wall box, 4-gang, for drywall applications.
HBLWSCS4A
Multi-service recessed wall box, 6-gang, for drywall applications.
HBLWSCS6A
Barrier for use with above boxes when used in multi-service applications.
HBLSCSBW
3-Gang
Wall Box Flanges – Trim Rings
4-Gang
Color
For 1-Gang Box
For 2-Gang Box
For 3-Gang Box
For 4-Gang Box
For 6-Gang Box
Black
Gray
Ivory
White
HBLTRIM1WBK
HBLTRIM1WGY
HBLTRIM1WI
HBLTRIM1WWA
HBLTRIM2WBK
HBLTRIM2WGY
HBLTRIM2WI
HBLTRIM2WWA
HBLTRIM3WBK
HBLTRIM3WGY
HBLTRIM3WI
HBLTRIM3WWA
HBLTRIM4WBK
HBLTRIM4WGY
HBLTRIM4WI
HBLTRIM4WWA
HBLTRIM6WBK
HBLTRIM6WGY
HBLTRIM6WI
HBLTRIM6WWA
Note: See table below for dimensional Information.
6-Gang
Multi-Connect – Dimensional Information
Catalog Number
Top and Bottom Knockouts
Height
Width
Depth
Gangs
Quantity
Size
HBLWSCS1
4.44" (112.8)
2.56" (65.0)
2.75" (69.8)
1
1
½", ¾"
HBLWSCS2A
4.44" (112.8)
4.56" (115.8)
2.75" (69.8)
2
1
½", ¾"
HBLWSCS3A
4.44" (112.8)
6.56" (166.6)
2.75" (69.8)
3
2
½", ¾"
HBLWSCS4A
4.44" (112.8)
8.56" (217.4)
2.75" (69.8)
4
1
½", ¾"
HBLWSCS6A
4.44" (112.8)
12.56" (319.0)
2.75" (69.8)
6
3
½", ¾"
HBLTRIM1W
6.75" (171.4)
4.25" (107.9)
.25" (6.3)
1
—
—
HBLTRIM2W
6.75" (171.4)
6.25" (158.7)
.25" (6.3)
2
—
—
HBLTRIM3W
6.75" (171.4)
8.25" (209.5)
.25" (6.3)
3
—
—
HBLTRIM4W
6.75" (171.4)
10.25" (260.3)
.25" (6.3)
4
—
—
HBLTRIM6W
6.75" (171.4)
13.25" (336.5)
.25" (6.3)
6
—
—
Hubbell – Screw Type Face Plates*
2.00"
HBLST302SGY
HBLDE301SGY
HBLTO310SGY
HBLTL318SGY
HBLTL319SGY
HBLBL300SGY
HBLIMFSGY
HBL317SGY
Duplex
Style Line®
Decorator
Toggle
Single Receptacle
(1.56" Boss Dia.)
Single Receptacle
(1.39" Boss Dia.)
Blank
3-Unit Hubbell iSTATION
Hubbell
6-Port
4.50"
Typical
Open Systems – Screw Type Face Plates*
HBLAM303SGY HBLAMP313SGY HBLKR314SGY HBLLT309SGY
AMP-ACO
AMP 6-Port
Krone®/Leviton®
SYSTIMAX®
HBLPA308SGY
HBLNO309SGY
Panduit
Mini-Com®
NORDX® 6-Port
(Cat. 5e jacks only)
(See Network Wiring section
for module options)
HBLSI305SGY HBLSI315SGY
Siemon
CT® Series
HBLOR306SGY HBLORT322SGY
Siemon
MAX® Series
Ortronics
Series II®
Ortronics
TracJack®
Note: *Catalog numbers indicated are gray, replace “GY” with the following to designate color: “BK” for Black, “I” for Ivory and “WA” for White.
AMP is a registered trademark of Tyco Electronics Corp. Krone® is a registered trademark of Krone, Inc. Leviton® is a registered trademark of Leviton. SYSTIMAX® is a
registered trademark of CommScope, Inc. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. NORDX® is a registered trademark of Belden/CDT, Inc.
MAX® and CT® Series are registered trademarks of The Siemon Company. TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
O-40
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement